by a file or a block device residing in the configured storage. The choice of
a storage type will determine the format of the hard disk image. Storages which
present block devices (LVM, ZFS, Ceph) will require the *raw disk image format*,
-whereas files based storages (Ext4, NFS, GlusterFS) will let you to choose
+whereas files based storages (Ext4, NFS, CIFS, GlusterFS) will let you to choose
either the *raw disk image format* or the *QEMU image format*.
* the *QEMU image format* is a copy on write format which allows snapshots, and
In addition to the number of virtual cores, you can configure how much resources
a VM can get in relation to the host CPU time and also in relation to other
VMs.
-With the *cpulimit* (`Host CPU Time') option you can limit how much CPU time the
-whole VM can use on the host. It is a floating point value representing CPU
+With the *cpulimit* (``Host CPU Time'') option you can limit how much CPU time
+the whole VM can use on the host. It is a floating point value representing CPU
time in percent, so `1.0` is equal to `100%`, `2.5` to `250%` and so on. If a
single process would fully use one single core it would have `100%` CPU Time
usage. If a VM with four cores utilizes all its cores fully it would
cluster where all nodes have the same CPU, set the CPU type to host, as in
theory this will give your guests maximum performance.
+Meltdown / Spectre related CPU flags
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There are two CPU flags related to the Meltdown and Spectre vulnerabilities
+footnote:[Meltdown Attack https://meltdownattack.com/] which need to be set
+manually unless the selected CPU type of your VM already enables them by default.
+
+The first, called 'pcid', helps to reduce the performance impact of the Meltdown
+mitigation called 'Kernel Page-Table Isolation (KPTI)', which effectively hides
+the Kernel memory from the user space. Without PCID, KPTI is quite an expensive
+mechanism footnote:[PCID is now a critical performance/security feature on x86
+https://groups.google.com/forum/m/#!topic/mechanical-sympathy/L9mHTbeQLNU].
+
+The second CPU flag is called 'spec-ctrl', which allows an operating system to
+selectively disable or restrict speculative execution in order to limit the
+ability of attackers to exploit the Spectre vulnerability.
+
+There are two requirements that need to be fulfilled in order to use these two
+CPU flags:
+
+* The host CPU(s) must support the feature and propagate it to the guest's virtual CPU(s)
+* The guest operating system must be updated to a version which mitigates the
+ attacks and is able to utilize the CPU feature
+
+In order to use 'spec-ctrl', your CPU or system vendor also needs to provide a
+so-called ``microcode update'' footnote:[You can use `intel-microcode' /
+`amd-microcode' from Debian non-free if your vendor does not provide such an
+update. Note that not all affected CPUs can be updated to support spec-ctrl.]
+for your CPU.
+
+To check if the {pve} host supports PCID, execute the following command as root:
+
+----
+# grep ' pcid ' /proc/cpuinfo
+----
+
+If this does not return empty your host's CPU has support for 'pcid'.
+
+To check if the {pve} host supports spec-ctrl, execute the following command as root:
+
+----
+# grep ' spec_ctrl ' /proc/cpuinfo
+----
+
+If this does not return empty your host's CPU has support for 'spec-ctrl'.
+
+If you use `host' or another CPU type which enables the desired flags by
+default, and you updated your guest OS to make use of the associated CPU
+features, you're already set.
+
+Otherwise you need to set the desired CPU flag of the virtual CPU, either by
+editing the CPU options in the WebUI, or by setting the 'flags' property of the
+'cpu' option in the VM configuration file.
+
NUMA
^^^^
You can also optionally emulate a *NUMA*
host.
.Fixed Memory Allocation
-[thumbnail="gui-create-vm-memory-fixed.png"]
+[thumbnail="gui-create-vm-memory.png"]
-When choosing a *fixed size memory* {pve} will simply allocate what you
-specify to your VM.
+When setting memory and minimum memory to the same amount
+{pve} will simply allocate what you specify to your VM.
Even when using a fixed memory size, the ballooning device gets added to the
VM, because it delivers useful information such as how much memory the guest
really uses.
In general, you should leave *ballooning* enabled, but if you want to disable
it (e.g. for debugging purposes), simply uncheck
-*Ballooning* or set
+*Ballooning Device* or set
balloon: 0
in the configuration.
.Automatic Memory Allocation
-[thumbnail="gui-create-vm-memory-dynamic.png", float="left"]
// see autoballoon() in pvestatd.pm
-When choosing to *automatically allocate memory*, {pve} will make sure that the
+When setting the minimum memory lower than memory, {pve} will make sure that the
minimum amount you specified is always available to the VM, and if RAM usage on
the host is below 80%, will dynamically add memory to the guest up to the
maximum memory specified.
the Qemu user networking stack, where a built-in router and DHCP server can
provide network access. This built-in DHCP will serve addresses in the private
10.0.2.0/24 range. The NAT mode is much slower than the bridged mode, and
-should only be used for testing.
+should only be used for testing. This mode is only available via CLI or the API,
+but not via the WebUI.
You can also skip adding a network device when creating a VM by selecting *No
network device*.
* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
you want the VM to be the first to be started. (We use the reverse startup
order for shutdown, so a machine with a start order of 1 would be the last to
-be shut down)
+be shut down). If multiple VMs have the same order defined on a host, they will
+additionally be ordered by 'VMID' in ascending order.
* *Startup delay*: Defines the interval between this VM start and subsequent
VMs starts . E.g. set it to 240 if you want to wait 240 seconds before starting
other VMs.
* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
for the VM to be offline after issuing a shutdown command.
-By default this value is set to 60, which means that {pve} will issue a
-shutdown request, wait 60s for the machine to be offline, and if after 60s
-the machine is still online will notify that the shutdown action failed.
+By default this value is set to 180, which means that {pve} will issue a
+shutdown request and wait 180 seconds for the machine to be offline. If
+the machine is still online after the timeout it will be stopped forcefully.
NOTE: VMs managed by the HA stack do not follow the 'start on boot' and
'boot order' options currently. Those VMs will be skipped by the startup and
stopped.
Please note that machines without a Start/Shutdown order parameter will always
-start after those where the parameter is set, and this parameter only
-makes sense between the machines running locally on a host, and not
+start after those where the parameter is set. Further, this parameter can only
+be enforced between virtual machines running on the same host, not
cluster-wide.
The VM is ready to be started.
+
+ifndef::wiki[]
+include::qm-cloud-init.adoc[]
+endif::wiki[]
+
+
+
Managing Virtual Machines with `qm`
------------------------------------
no longer running.
+ifdef::wiki[]
+
+See Also
+~~~~~~~~
+
+* link:/wiki/Cloud-Init_Support[Cloud-Init Support]
+
+endif::wiki[]
+
+
ifdef::manvolnum[]
Files
projects / pve-docs.git / blobdiff