+BIOS and UEFI
+~~~~~~~~~~~~~
+
+In order to properly emulate a computer, QEMU needs to use a firmware.
+By default QEMU uses *SeaBIOS* for this, which is an open-source, x86 BIOS
+implementation. SeaBIOS is a good choice for most standard setups.
+
+There are, however, some scenarios in which a BIOS is not a good firmware
+to boot from, e.g. if you want to do VGA passthrough. footnote:[Alex Williamson has a very good blog entry about this.
+http://vfio.blogspot.co.at/2014/08/primary-graphics-assignment-without-vga.html]
+In such cases, you should rather use *OVMF*, which is an open-source UEFI implemenation. footnote:[See the OVMF Project http://www.tianocore.org/ovmf/]
+
+If you want to use OVMF, there are several things to consider:
+
+In order to save things like the *boot order*, there needs to be an EFI Disk.
+This disk will be included in backups and snapshots, and there can only be one.
+
+You can create such a disk with the following command:
+
+ qm set <vmid> -efidisk0 <storage>:1,format=<format>
+
+Where *<storage>* is the storage where you want to have the disk, and
+*<format>* is a format which the storage supports. Alternatively, you can
+create such a disk through the web interface with 'Add' -> 'EFI Disk' in the
+hardware section of a VM.
+
+When using OVMF with a virtual display (without VGA passthrough),
+you need to set the client resolution in the OVMF menu(which you can reach
+with a press of the ESC button during boot), or you have to choose
+SPICE as the display type.
+
+