use URI::Escape;
use UUID;
-use PVE::Cluster qw(cfs_register_file cfs_read_file cfs_write_file cfs_lock_file);
+use PVE::Cluster qw(cfs_register_file cfs_read_file cfs_write_file);
use PVE::DataCenterConfig;
use PVE::Exception qw(raise raise_param_exc);
-use PVE::GuestHelpers;
+use PVE::GuestHelpers qw(safe_string_ne safe_num_ne safe_boolean_ne);
use PVE::INotify;
use PVE::JSONSchema qw(get_standard_option);
use PVE::ProcFSTools;
use PVE::Storage;
use PVE::SysFSTools;
use PVE::Systemd;
-use PVE::Tools qw(run_command lock_file lock_file_full file_read_firstline dir_glob_foreach get_host_arch $IPV6RE);
+use PVE::Tools qw(run_command file_read_firstline file_get_contents dir_glob_foreach get_host_arch $IPV6RE);
use PVE::QMPClient;
use PVE::QemuConfig;
-use PVE::QemuServer::Helpers qw(min_version);
+use PVE::QemuServer::Helpers qw(min_version config_aware_timeout);
use PVE::QemuServer::Cloudinit;
+use PVE::QemuServer::CPUConfig qw(print_cpu_device get_cpu_options);
+use PVE::QemuServer::Drive qw(is_valid_drivename drive_is_cloudinit drive_is_cdrom parse_drive print_drive);
use PVE::QemuServer::Machine;
use PVE::QemuServer::Memory;
use PVE::QemuServer::Monitor qw(mon_cmd);
-use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr print_pcie_root_port);
+use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr print_pcie_root_port parse_hostpci);
use PVE::QemuServer::USB qw(parse_usb_device);
+my $have_sdn;
+eval {
+ require PVE::Network::SDN::Zones;
+ $have_sdn = 1;
+};
+
my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
my $OVMF = {
x86_64 => [
my $cpuinfo = PVE::ProcFSTools::read_cpuinfo();
-my $QEMU_FORMAT_RE = qr/raw|cow|qcow|qcow2|qed|vmdk|cloop/;
-
# Note about locking: we use flock on the config file protect
# against concurent actions.
# Aditionaly, we have a 'lock' setting in the config file. This
optional => 1,
});
-PVE::JSONSchema::register_standard_option('pve-qm-image-format', {
- type => 'string',
- enum => [qw(raw cow qcow qed qcow2 vmdk cloop)],
- description => "The drive's backing file's data format.",
- optional => 1,
-});
-
PVE::JSONSchema::register_standard_option('pve-qemu-machine', {
description => "Specifies the Qemu machine type.",
type => 'string',
optional => 1,
});
+
+sub map_storage {
+ my ($map, $source) = @_;
+
+ return $source if !defined($map);
+
+ return $map->{entries}->{$source}
+ if $map->{entries} && defined($map->{entries}->{$source});
+
+ return $map->{default} if $map->{default};
+
+ # identity (fallback)
+ return $source;
+}
+
+PVE::JSONSchema::register_standard_option('pve-targetstorage', {
+ description => "Mapping from source to target storages. Providing only a single storage ID maps all source storages to that storage. Providing the special value '1' will map each source storage to itself.",
+ type => 'string',
+ format => 'storagepair-list',
+ optional => 1,
+});
+
#no warnings 'redefine';
sub cgroups_write {
return $nodename_cache;
}
-my $cpu_vendor_list = {
- # Intel CPUs
- 486 => 'GenuineIntel',
- pentium => 'GenuineIntel',
- pentium2 => 'GenuineIntel',
- pentium3 => 'GenuineIntel',
- coreduo => 'GenuineIntel',
- core2duo => 'GenuineIntel',
- Conroe => 'GenuineIntel',
- Penryn => 'GenuineIntel',
- Nehalem => 'GenuineIntel',
- 'Nehalem-IBRS' => 'GenuineIntel',
- Westmere => 'GenuineIntel',
- 'Westmere-IBRS' => 'GenuineIntel',
- SandyBridge => 'GenuineIntel',
- 'SandyBridge-IBRS' => 'GenuineIntel',
- IvyBridge => 'GenuineIntel',
- 'IvyBridge-IBRS' => 'GenuineIntel',
- Haswell => 'GenuineIntel',
- 'Haswell-IBRS' => 'GenuineIntel',
- 'Haswell-noTSX' => 'GenuineIntel',
- 'Haswell-noTSX-IBRS' => 'GenuineIntel',
- Broadwell => 'GenuineIntel',
- 'Broadwell-IBRS' => 'GenuineIntel',
- 'Broadwell-noTSX' => 'GenuineIntel',
- 'Broadwell-noTSX-IBRS' => 'GenuineIntel',
- 'Skylake-Client' => 'GenuineIntel',
- 'Skylake-Client-IBRS' => 'GenuineIntel',
- 'Skylake-Server' => 'GenuineIntel',
- 'Skylake-Server-IBRS' => 'GenuineIntel',
- 'Cascadelake-Server' => 'GenuineIntel',
- KnightsMill => 'GenuineIntel',
-
-
- # AMD CPUs
- athlon => 'AuthenticAMD',
- phenom => 'AuthenticAMD',
- Opteron_G1 => 'AuthenticAMD',
- Opteron_G2 => 'AuthenticAMD',
- Opteron_G3 => 'AuthenticAMD',
- Opteron_G4 => 'AuthenticAMD',
- Opteron_G5 => 'AuthenticAMD',
- EPYC => 'AuthenticAMD',
- 'EPYC-IBPB' => 'AuthenticAMD',
-
- # generic types, use vendor from host node
- host => 'default',
- kvm32 => 'default',
- kvm64 => 'default',
- qemu32 => 'default',
- qemu64 => 'default',
- max => 'default',
-};
-
-my @supported_cpu_flags = (
- 'pcid',
- 'spec-ctrl',
- 'ibpb',
- 'ssbd',
- 'virt-ssbd',
- 'amd-ssbd',
- 'amd-no-ssb',
- 'pdpe1gb',
- 'md-clear',
- 'hv-tlbflush',
- 'hv-evmcs',
- 'aes'
-);
-my $cpu_flag = qr/[+-](@{[join('|', @supported_cpu_flags)]})/;
-
-my $cpu_fmt = {
- cputype => {
- description => "Emulated CPU type.",
- type => 'string',
- enum => [ sort { "\L$a" cmp "\L$b" } keys %$cpu_vendor_list ],
- default => 'kvm64',
- default_key => 1,
- },
- hidden => {
- description => "Do not identify as a KVM virtual machine.",
- type => 'boolean',
- optional => 1,
- default => 0
- },
- 'hv-vendor-id' => {
- type => 'string',
- pattern => qr/[a-zA-Z0-9]{1,12}/,
- format_description => 'vendor-id',
- description => 'The Hyper-V vendor ID. Some drivers or programs inside Windows guests need a specific ID.',
- optional => 1,
- },
- flags => {
- description => "List of additional CPU flags separated by ';'."
- . " Use '+FLAG' to enable, '-FLAG' to disable a flag."
- . " Currently supported flags: @{[join(', ', @supported_cpu_flags)]}.",
- format_description => '+FLAG[;-FLAG...]',
- type => 'string',
- pattern => qr/$cpu_flag(;$cpu_flag)*/,
- optional => 1,
- },
-};
-
my $watchdog_fmt = {
model => {
default_key => 1,
},
};
+my $rng_fmt = {
+ source => {
+ type => 'string',
+ enum => ['/dev/urandom', '/dev/random', '/dev/hwrng'],
+ default_key => 1,
+ description => "The file on the host to gather entropy from. In most"
+ . " cases /dev/urandom should be preferred over /dev/random"
+ . " to avoid entropy-starvation issues on the host. Using"
+ . " urandom does *not* decrease security in any meaningful"
+ . " way, as it's still seeded from real entropy, and the"
+ . " bytes provided will most likely be mixed with real"
+ . " entropy on the guest as well. /dev/hwrng can be used"
+ . " to pass through a hardware RNG from the host.",
+ },
+ max_bytes => {
+ type => 'integer',
+ description => "Maximum bytes of entropy injected into the guest every"
+ . " 'period' milliseconds. Prefer a lower value when using"
+ . " /dev/random as source. Use 0 to disable limiting"
+ . " (potentially dangerous!).",
+ optional => 1,
+
+ # default is 1 KiB/s, provides enough entropy to the guest to avoid
+ # boot-starvation issues (e.g. systemd etc...) while allowing no chance
+ # of overwhelming the host, provided we're reading from /dev/urandom
+ default => 1024,
+ },
+ period => {
+ type => 'integer',
+ description => "Every 'period' milliseconds the entropy-injection quota"
+ . " is reset, allowing the guest to retrieve another"
+ . " 'max_bytes' of entropy.",
+ optional => 1,
+ default => 1000,
+ },
+};
+
my $confdesc = {
onboot => {
optional => 1,
optional => 1,
description => "Emulated CPU type.",
type => 'string',
- format => $cpu_fmt,
+ format => 'pve-vm-cpu-conf',
},
parent => get_standard_option('pve-snapshot-name', {
optional => 1,
optional => 1,
}),
runningmachine => get_standard_option('pve-qemu-machine', {
- description => "Specifies the Qemu machine type of the running vm. This is used internally for snapshots.",
+ description => "Specifies the QEMU machine type of the running vm. This is used internally for snapshots.",
}),
+ runningcpu => {
+ description => "Specifies the QEMU '-cpu' parameter of the running vm. This is used internally for snapshots.",
+ optional => 1,
+ type => 'string',
+ pattern => $PVE::QemuServer::CPUConfig::qemu_cmdline_cpu_re,
+ format_description => 'QEMU -cpu parameter'
+ },
machine => get_standard_option('pve-qemu-machine'),
arch => {
description => "Virtual processor architecture. Defaults to the host.",
description => 'Tags of the VM. This is only meta information.',
optional => 1,
},
+ rng0 => {
+ type => 'string',
+ format => $rng_fmt,
+ description => "Configure a VirtIO-based Random Number Generator.",
+ optional => 1,
+ },
};
my $cicustom_fmt = {
PVE::JSONSchema::register_standard_option("pve-qm-$k", $v);
}
-my $MAX_IDE_DISKS = 4;
-my $MAX_SCSI_DISKS = 14;
-my $MAX_VIRTIO_DISKS = 16;
-my $MAX_SATA_DISKS = 6;
my $MAX_USB_DEVICES = 5;
my $MAX_NETS = 32;
-my $MAX_UNUSED_DISKS = 256;
-my $MAX_HOSTPCI_DEVICES = 16;
my $MAX_SERIAL_PORTS = 4;
my $MAX_PARALLEL_PORTS = 3;
my $MAX_NUMA = 8;
type => 'string',
description => $net_fmt_bridge_descr,
format_description => 'bridge',
+ pattern => '[-_.\w\d]+',
optional => 1,
},
queues => {
description => 'Whether this interface should be disconnected (like pulling the plug).',
optional => 1,
},
+ mtu => {
+ type => 'integer',
+ minimum => 1, maximum => 65520,
+ description => "Force MTU, for VirtIO only. Set to '1' to use the bridge MTU",
+ optional => 1,
+ },
};
my $netdesc = {
return $volid;
}
-my $drivename_hash;
-
-my %drivedesc_base = (
- volume => { alias => 'file' },
- file => {
- type => 'string',
- format => 'pve-volume-id-or-qm-path',
- default_key => 1,
- format_description => 'volume',
- description => "The drive's backing volume.",
- },
- media => {
- type => 'string',
- enum => [qw(cdrom disk)],
- description => "The drive's media type.",
- default => 'disk',
- optional => 1
- },
- cyls => {
- type => 'integer',
- description => "Force the drive's physical geometry to have a specific cylinder count.",
- optional => 1
- },
- heads => {
- type => 'integer',
- description => "Force the drive's physical geometry to have a specific head count.",
- optional => 1
- },
- secs => {
- type => 'integer',
- description => "Force the drive's physical geometry to have a specific sector count.",
- optional => 1
- },
- trans => {
- type => 'string',
- enum => [qw(none lba auto)],
- description => "Force disk geometry bios translation mode.",
- optional => 1,
- },
- snapshot => {
- type => 'boolean',
- description => "Controls qemu's snapshot mode feature."
- . " If activated, changes made to the disk are temporary and will"
- . " be discarded when the VM is shutdown.",
- optional => 1,
- },
- cache => {
- type => 'string',
- enum => [qw(none writethrough writeback unsafe directsync)],
- description => "The drive's cache mode",
- optional => 1,
- },
- format => get_standard_option('pve-qm-image-format'),
- size => {
- type => 'string',
- format => 'disk-size',
- format_description => 'DiskSize',
- description => "Disk size. This is purely informational and has no effect.",
- optional => 1,
- },
- backup => {
- type => 'boolean',
- description => "Whether the drive should be included when making backups.",
- optional => 1,
- },
- replicate => {
- type => 'boolean',
- description => 'Whether the drive should considered for replication jobs.',
- optional => 1,
- default => 1,
- },
- rerror => {
- type => 'string',
- enum => [qw(ignore report stop)],
- description => 'Read error action.',
- optional => 1,
- },
- werror => {
- type => 'string',
- enum => [qw(enospc ignore report stop)],
- description => 'Write error action.',
- optional => 1,
- },
- aio => {
- type => 'string',
- enum => [qw(native threads)],
- description => 'AIO type to use.',
- optional => 1,
- },
- discard => {
- type => 'string',
- enum => [qw(ignore on)],
- description => 'Controls whether to pass discard/trim requests to the underlying storage.',
- optional => 1,
- },
- detect_zeroes => {
- type => 'boolean',
- description => 'Controls whether to detect and try to optimize writes of zeroes.',
- optional => 1,
- },
- serial => {
- type => 'string',
- format => 'urlencoded',
- format_description => 'serial',
- maxLength => 20*3, # *3 since it's %xx url enoded
- description => "The drive's reported serial number, url-encoded, up to 20 bytes long.",
- optional => 1,
- },
- shared => {
- type => 'boolean',
- description => 'Mark this locally-managed volume as available on all nodes',
- verbose_description => "Mark this locally-managed volume as available on all nodes.\n\nWARNING: This option does not share the volume automatically, it assumes it is shared already!",
- optional => 1,
- default => 0,
- }
-);
-
-my %iothread_fmt = ( iothread => {
- type => 'boolean',
- description => "Whether to use iothreads for this drive",
- optional => 1,
-});
-
-my %model_fmt = (
- model => {
- type => 'string',
- format => 'urlencoded',
- format_description => 'model',
- maxLength => 40*3, # *3 since it's %xx url enoded
- description => "The drive's reported model name, url-encoded, up to 40 bytes long.",
- optional => 1,
- },
-);
-
-my %queues_fmt = (
- queues => {
- type => 'integer',
- description => "Number of queues.",
- minimum => 2,
- optional => 1
- }
-);
-
-my %scsiblock_fmt = (
- scsiblock => {
- type => 'boolean',
- description => "whether to use scsi-block for full passthrough of host block device\n\nWARNING: can lead to I/O errors in combination with low memory or high memory fragmentation on host",
- optional => 1,
- default => 0,
- },
-);
-
-my %ssd_fmt = (
- ssd => {
- type => 'boolean',
- description => "Whether to expose this drive as an SSD, rather than a rotational hard disk.",
- optional => 1,
- },
-);
-
-my %wwn_fmt = (
- wwn => {
- type => 'string',
- pattern => qr/^(0x)[0-9a-fA-F]{16}/,
- format_description => 'wwn',
- description => "The drive's worldwide name, encoded as 16 bytes hex string, prefixed by '0x'.",
- optional => 1,
- },
-);
-
-my $add_throttle_desc = sub {
- my ($key, $type, $what, $unit, $longunit, $minimum) = @_;
- my $d = {
- type => $type,
- format_description => $unit,
- description => "Maximum $what in $longunit.",
- optional => 1,
- };
- $d->{minimum} = $minimum if defined($minimum);
- $drivedesc_base{$key} = $d;
-};
-# throughput: (leaky bucket)
-$add_throttle_desc->('bps', 'integer', 'r/w speed', 'bps', 'bytes per second');
-$add_throttle_desc->('bps_rd', 'integer', 'read speed', 'bps', 'bytes per second');
-$add_throttle_desc->('bps_wr', 'integer', 'write speed', 'bps', 'bytes per second');
-$add_throttle_desc->('mbps', 'number', 'r/w speed', 'mbps', 'megabytes per second');
-$add_throttle_desc->('mbps_rd', 'number', 'read speed', 'mbps', 'megabytes per second');
-$add_throttle_desc->('mbps_wr', 'number', 'write speed', 'mbps', 'megabytes per second');
-$add_throttle_desc->('iops', 'integer', 'r/w I/O', 'iops', 'operations per second');
-$add_throttle_desc->('iops_rd', 'integer', 'read I/O', 'iops', 'operations per second');
-$add_throttle_desc->('iops_wr', 'integer', 'write I/O', 'iops', 'operations per second');
-
-# pools: (pool of IO before throttling starts taking effect)
-$add_throttle_desc->('mbps_max', 'number', 'unthrottled r/w pool', 'mbps', 'megabytes per second');
-$add_throttle_desc->('mbps_rd_max', 'number', 'unthrottled read pool', 'mbps', 'megabytes per second');
-$add_throttle_desc->('mbps_wr_max', 'number', 'unthrottled write pool', 'mbps', 'megabytes per second');
-$add_throttle_desc->('iops_max', 'integer', 'unthrottled r/w I/O pool', 'iops', 'operations per second');
-$add_throttle_desc->('iops_rd_max', 'integer', 'unthrottled read I/O pool', 'iops', 'operations per second');
-$add_throttle_desc->('iops_wr_max', 'integer', 'unthrottled write I/O pool', 'iops', 'operations per second');
-
-# burst lengths
-$add_throttle_desc->('bps_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
-$add_throttle_desc->('bps_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
-$add_throttle_desc->('bps_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
-$add_throttle_desc->('iops_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
-$add_throttle_desc->('iops_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
-$add_throttle_desc->('iops_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
-
-# legacy support
-$drivedesc_base{'bps_rd_length'} = { alias => 'bps_rd_max_length' };
-$drivedesc_base{'bps_wr_length'} = { alias => 'bps_wr_max_length' };
-$drivedesc_base{'iops_rd_length'} = { alias => 'iops_rd_max_length' };
-$drivedesc_base{'iops_wr_length'} = { alias => 'iops_wr_max_length' };
-
-my $ide_fmt = {
- %drivedesc_base,
- %model_fmt,
- %ssd_fmt,
- %wwn_fmt,
-};
-PVE::JSONSchema::register_format("pve-qm-ide", $ide_fmt);
-
-my $idedesc = {
- optional => 1,
- type => 'string', format => $ide_fmt,
- description => "Use volume as IDE hard disk or CD-ROM (n is 0 to " .($MAX_IDE_DISKS -1) . ").",
-};
-PVE::JSONSchema::register_standard_option("pve-qm-ide", $idedesc);
-
-my $scsi_fmt = {
- %drivedesc_base,
- %iothread_fmt,
- %queues_fmt,
- %scsiblock_fmt,
- %ssd_fmt,
- %wwn_fmt,
-};
-my $scsidesc = {
- optional => 1,
- type => 'string', format => $scsi_fmt,
- description => "Use volume as SCSI hard disk or CD-ROM (n is 0 to " . ($MAX_SCSI_DISKS - 1) . ").",
-};
-PVE::JSONSchema::register_standard_option("pve-qm-scsi", $scsidesc);
-
-my $sata_fmt = {
- %drivedesc_base,
- %ssd_fmt,
- %wwn_fmt,
-};
-my $satadesc = {
- optional => 1,
- type => 'string', format => $sata_fmt,
- description => "Use volume as SATA hard disk or CD-ROM (n is 0 to " . ($MAX_SATA_DISKS - 1). ").",
-};
-PVE::JSONSchema::register_standard_option("pve-qm-sata", $satadesc);
-
-my $virtio_fmt = {
- %drivedesc_base,
- %iothread_fmt,
-};
-my $virtiodesc = {
- optional => 1,
- type => 'string', format => $virtio_fmt,
- description => "Use volume as VIRTIO hard disk (n is 0 to " . ($MAX_VIRTIO_DISKS - 1) . ").",
-};
-PVE::JSONSchema::register_standard_option("pve-qm-virtio", $virtiodesc);
-
-my $alldrive_fmt = {
- %drivedesc_base,
- %iothread_fmt,
- %model_fmt,
- %queues_fmt,
- %scsiblock_fmt,
- %ssd_fmt,
- %wwn_fmt,
-};
-
-my $efidisk_fmt = {
- volume => { alias => 'file' },
- file => {
- type => 'string',
- format => 'pve-volume-id-or-qm-path',
- default_key => 1,
- format_description => 'volume',
- description => "The drive's backing volume.",
- },
- format => get_standard_option('pve-qm-image-format'),
- size => {
- type => 'string',
- format => 'disk-size',
- format_description => 'DiskSize',
- description => "Disk size. This is purely informational and has no effect.",
- optional => 1,
- },
-};
-
-my $efidisk_desc = {
- optional => 1,
- type => 'string', format => $efidisk_fmt,
- description => "Configure a Disk for storing EFI vars",
-};
-
-PVE::JSONSchema::register_standard_option("pve-qm-efidisk", $efidisk_desc);
-
my $usb_fmt = {
host => {
default_key => 1,
};
PVE::JSONSchema::register_standard_option("pve-qm-usb", $usbdesc);
-my $PCIRE = qr/([a-f0-9]{4}:)?[a-f0-9]{2}:[a-f0-9]{2}(?:\.[a-f0-9])?/;
-my $hostpci_fmt = {
- host => {
- default_key => 1,
- type => 'string',
- pattern => qr/$PCIRE(;$PCIRE)*/,
- format_description => 'HOSTPCIID[;HOSTPCIID2...]',
- description => <<EODESCR,
-Host PCI device pass through. The PCI ID of a host's PCI device or a list
-of PCI virtual functions of the host. HOSTPCIID syntax is:
-
-'bus:dev.func' (hexadecimal numbers)
-
-You can us the 'lspci' command to list existing PCI devices.
-EODESCR
- },
- rombar => {
- type => 'boolean',
- description => "Specify whether or not the device's ROM will be visible in the guest's memory map.",
- optional => 1,
- default => 1,
- },
- romfile => {
- type => 'string',
- pattern => '[^,;]+',
- format_description => 'string',
- description => "Custom pci device rom filename (must be located in /usr/share/kvm/).",
- optional => 1,
- },
- pcie => {
- type => 'boolean',
- description => "Choose the PCI-express bus (needs the 'q35' machine model).",
- optional => 1,
- default => 0,
- },
- 'x-vga' => {
- type => 'boolean',
- description => "Enable vfio-vga device support.",
- optional => 1,
- default => 0,
- },
- 'mdev' => {
- type => 'string',
- format_description => 'string',
- pattern => '[^/\.:]+',
- optional => 1,
- description => <<EODESCR
-The type of mediated device to use.
-An instance of this type will be created on startup of the VM and
-will be cleaned up when the VM stops.
-EODESCR
- }
-};
-PVE::JSONSchema::register_format('pve-qm-hostpci', $hostpci_fmt);
-
-my $hostpcidesc = {
- optional => 1,
- type => 'string', format => 'pve-qm-hostpci',
- description => "Map host PCI devices into guest.",
- verbose_description => <<EODESCR,
-Map host PCI devices into guest.
-
-NOTE: This option allows direct access to host hardware. So it is no longer
-possible to migrate such machines - use with special care.
-
-CAUTION: Experimental! User reported problems with this option.
-EODESCR
-};
-PVE::JSONSchema::register_standard_option("pve-qm-hostpci", $hostpcidesc);
-
my $serialdesc = {
optional => 1,
type => 'string',
$confdesc->{"serial$i"} = $serialdesc;
}
-for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
- $confdesc->{"hostpci$i"} = $hostpcidesc;
-}
-
-for (my $i = 0; $i < $MAX_IDE_DISKS; $i++) {
- $drivename_hash->{"ide$i"} = 1;
- $confdesc->{"ide$i"} = $idedesc;
-}
-
-for (my $i = 0; $i < $MAX_SATA_DISKS; $i++) {
- $drivename_hash->{"sata$i"} = 1;
- $confdesc->{"sata$i"} = $satadesc;
-}
-
-for (my $i = 0; $i < $MAX_SCSI_DISKS; $i++) {
- $drivename_hash->{"scsi$i"} = 1;
- $confdesc->{"scsi$i"} = $scsidesc ;
+for (my $i = 0; $i < $PVE::QemuServer::PCI::MAX_HOSTPCI_DEVICES; $i++) {
+ $confdesc->{"hostpci$i"} = $PVE::QemuServer::PCI::hostpcidesc;
}
-for (my $i = 0; $i < $MAX_VIRTIO_DISKS; $i++) {
- $drivename_hash->{"virtio$i"} = 1;
- $confdesc->{"virtio$i"} = $virtiodesc;
+for my $key (keys %{$PVE::QemuServer::Drive::drivedesc_hash}) {
+ $confdesc->{$key} = $PVE::QemuServer::Drive::drivedesc_hash->{$key};
}
-$drivename_hash->{efidisk0} = 1;
-$confdesc->{efidisk0} = $efidisk_desc;
-
for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
$confdesc->{"usb$i"} = $usbdesc;
}
-my $unuseddesc = {
- optional => 1,
- type => 'string', format => 'pve-volume-id',
- description => "Reference to unused volumes. This is used internally, and should not be modified manually.",
-};
-
-for (my $i = 0; $i < $MAX_UNUSED_DISKS; $i++) {
- $confdesc->{"unused$i"} = $unuseddesc;
-}
-
my $kvm_api_version = 0;
sub kvm_version {
return -c '/dev/vhost-net';
}
-sub valid_drive_names {
- # order is important - used to autoselect boot disk
- return ((map { "ide$_" } (0 .. ($MAX_IDE_DISKS - 1))),
- (map { "scsi$_" } (0 .. ($MAX_SCSI_DISKS - 1))),
- (map { "virtio$_" } (0 .. ($MAX_VIRTIO_DISKS - 1))),
- (map { "sata$_" } (0 .. ($MAX_SATA_DISKS - 1))),
- 'efidisk0');
-}
-
-sub is_valid_drivename {
- my $dev = shift;
-
- return defined($drivename_hash->{$dev});
-}
-
sub option_exists {
my $key = shift;
return defined($confdesc->{$key});
die "unable to parse hotplug option\n";
}
-# ideX = [volume=]volume-id[,media=d][,cyls=c,heads=h,secs=s[,trans=t]]
-# [,snapshot=on|off][,cache=on|off][,format=f][,backup=yes|no]
-# [,rerror=ignore|report|stop][,werror=enospc|ignore|report|stop]
-# [,aio=native|threads][,discard=ignore|on][,detect_zeroes=on|off]
-# [,iothread=on][,serial=serial][,model=model]
-
-sub parse_drive {
- my ($key, $data) = @_;
+sub scsi_inquiry {
+ my($fh, $noerr) = @_;
- my ($interface, $index);
+ my $SG_IO = 0x2285;
+ my $SG_GET_VERSION_NUM = 0x2282;
- if ($key =~ m/^([^\d]+)(\d+)$/) {
- $interface = $1;
- $index = $2;
- } else {
+ my $versionbuf = "\x00" x 8;
+ my $ret = ioctl($fh, $SG_GET_VERSION_NUM, $versionbuf);
+ if (!$ret) {
+ die "scsi ioctl SG_GET_VERSION_NUM failoed - $!\n" if !$noerr;
return undef;
}
-
- my $desc = $key =~ /^unused\d+$/ ? $alldrive_fmt
- : $confdesc->{$key}->{format};
- if (!$desc) {
- warn "invalid drive key: $key\n";
- return undef;
- }
- my $res = eval { PVE::JSONSchema::parse_property_string($desc, $data) };
- return undef if !$res;
- $res->{interface} = $interface;
- $res->{index} = $index;
-
- my $error = 0;
- foreach my $opt (qw(bps bps_rd bps_wr)) {
- if (my $bps = defined(delete $res->{$opt})) {
- if (defined($res->{"m$opt"})) {
- warn "both $opt and m$opt specified\n";
- ++$error;
- next;
- }
- $res->{"m$opt"} = sprintf("%.3f", $bps / (1024*1024.0));
- }
- }
-
- # can't use the schema's 'requires' because of the mbps* => bps* "transforming aliases"
- for my $requirement (
- [mbps_max => 'mbps'],
- [mbps_rd_max => 'mbps_rd'],
- [mbps_wr_max => 'mbps_wr'],
- [miops_max => 'miops'],
- [miops_rd_max => 'miops_rd'],
- [miops_wr_max => 'miops_wr'],
- [bps_max_length => 'mbps_max'],
- [bps_rd_max_length => 'mbps_rd_max'],
- [bps_wr_max_length => 'mbps_wr_max'],
- [iops_max_length => 'iops_max'],
- [iops_rd_max_length => 'iops_rd_max'],
- [iops_wr_max_length => 'iops_wr_max']) {
- my ($option, $requires) = @$requirement;
- if ($res->{$option} && !$res->{$requires}) {
- warn "$option requires $requires\n";
- ++$error;
- }
- }
-
- return undef if $error;
-
- return undef if $res->{mbps_rd} && $res->{mbps};
- return undef if $res->{mbps_wr} && $res->{mbps};
- return undef if $res->{iops_rd} && $res->{iops};
- return undef if $res->{iops_wr} && $res->{iops};
-
- if ($res->{media} && ($res->{media} eq 'cdrom')) {
- return undef if $res->{snapshot} || $res->{trans} || $res->{format};
- return undef if $res->{heads} || $res->{secs} || $res->{cyls};
- return undef if $res->{interface} eq 'virtio';
- }
-
- if (my $size = $res->{size}) {
- return undef if !defined($res->{size} = PVE::JSONSchema::parse_size($size));
- }
-
- return $res;
-}
-
-sub print_drive {
- my ($drive) = @_;
- my $data = { %$drive };
- delete $data->{$_} for qw(index interface);
- return PVE::JSONSchema::print_property_string($data, $alldrive_fmt);
-}
-
-sub scsi_inquiry {
- my($fh, $noerr) = @_;
-
- my $SG_IO = 0x2285;
- my $SG_GET_VERSION_NUM = 0x2282;
-
- my $versionbuf = "\x00" x 8;
- my $ret = ioctl($fh, $SG_GET_VERSION_NUM, $versionbuf);
- if (!$ret) {
- die "scsi ioctl SG_GET_VERSION_NUM failoed - $!\n" if !$noerr;
- return undef;
- }
- my $version = unpack("I", $versionbuf);
- if ($version < 30000) {
- die "scsi generic interface too old\n" if !$noerr;
+ my $version = unpack("I", $versionbuf);
+ if ($version < 30000) {
+ die "scsi generic interface too old\n" if !$noerr;
return undef;
}
$device .= ",wwn=$drive->{wwn}" if $drive->{wwn};
} elsif ($drive->{interface} eq 'ide' || $drive->{interface} eq 'sata') {
- my $maxdev = ($drive->{interface} eq 'sata') ? $MAX_SATA_DISKS : 2;
+ my $maxdev = ($drive->{interface} eq 'sata') ? $PVE::QemuServer::Drive::MAX_SATA_DISKS : 2;
my $controller = int($drive->{index} / $maxdev);
my $unit = $drive->{index} % $maxdev;
my $devicetype = ($drive->{media} && $drive->{media} eq 'cdrom') ? "cd" : "hd";
return $initiator;
}
-sub print_drive_full {
+sub print_drive_commandline_full {
my ($storecfg, $vmid, $drive) = @_;
my $path;
}
$tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex} ;
+ if (my $mtu = $net->{mtu}) {
+ if ($net->{model} eq 'virtio' && $net->{bridge}) {
+ my $bridge_mtu = PVE::Network::read_bridge_mtu($net->{bridge});
+ if ($mtu == 1) {
+ $mtu = $bridge_mtu;
+ } elsif ($mtu < 576) {
+ die "netdev $netid: MTU '$mtu' is smaller than the IP minimum MTU '576'\n";
+ } elsif ($mtu > $bridge_mtu) {
+ die "netdev $netid: MTU '$mtu' is bigger than the bridge MTU '$bridge_mtu'\n";
+ }
+ $tmpstr .= ",host_mtu=$mtu";
+ } else {
+ warn "WARN: netdev $netid: ignoring MTU '$mtu', not using VirtIO or no bridge configured.\n";
+ }
+ }
+
if ($use_old_bios_files) {
my $romfile;
if ($device eq 'virtio-net-pci') {
return $netdev;
}
-
-sub print_cpu_device {
- my ($conf, $id) = @_;
-
- my $kvm = $conf->{kvm} // 1;
- my $cpu = $kvm ? "kvm64" : "qemu64";
- if (my $cputype = $conf->{cpu}) {
- my $cpuconf = PVE::JSONSchema::parse_property_string($cpu_fmt, $cputype)
- or die "Cannot parse cpu description: $cputype\n";
- $cpu = $cpuconf->{cputype};
- }
-
- my $cores = $conf->{cores} || 1;
-
- my $current_core = ($id - 1) % $cores;
- my $current_socket = int(($id - 1 - $current_core)/$cores);
-
- return "$cpu-x86_64-cpu,id=cpu$id,socket-id=$current_socket,core-id=$current_core,thread-id=0";
-}
-
my $vga_map = {
'cirrus' => 'cirrus-vga',
'std' => 'VGA',
return "$type,id=${vgaid}${memory}${max_outputs}${pciaddr}";
}
-sub drive_is_cloudinit {
- my ($drive) = @_;
- return $drive->{file} =~ m@[:/]vm-\d+-cloudinit(?:\.$QEMU_FORMAT_RE)?$@;
-}
-
-sub drive_is_cdrom {
- my ($drive, $exclude_cloudinit) = @_;
-
- return 0 if $exclude_cloudinit && drive_is_cloudinit($drive);
-
- return $drive && $drive->{media} && ($drive->{media} eq 'cdrom');
-
-}
-
sub parse_number_sets {
my ($set) = @_;
my $res = [];
return $res;
}
-sub parse_hostpci {
- my ($value) = @_;
-
- return undef if !$value;
-
- my $res = PVE::JSONSchema::parse_property_string($hostpci_fmt, $value);
-
- my @idlist = split(/;/, $res->{host});
- delete $res->{host};
- foreach my $id (@idlist) {
- my $devs = PVE::SysFSTools::lspci($id);
- die "no PCI device found for '$id'\n" if !scalar(@$devs);
- push @{$res->{pciid}}, @$devs;
- }
- return $res;
-}
-
# netX: e1000=XX:XX:XX:XX:XX:XX,bridge=vmbr0,rate=<mbps>
sub parse_net {
my ($data) = @_;
PVE::JSONSchema::register_format('pve-qm-smbios1', $smbios1_fmt);
-PVE::JSONSchema::register_format('pve-qm-bootdisk', \&verify_bootdisk);
-sub verify_bootdisk {
- my ($value, $noerr) = @_;
-
- return $value if is_valid_drivename($value);
-
- return undef if $noerr;
-
- die "invalid boot disk '$value'\n";
-}
-
sub parse_watchdog {
my ($value) = @_;
return $res;
}
+sub parse_rng {
+ my ($value) = @_;
+
+ return undef if !$value;
+
+ my $res = eval { PVE::JSONSchema::parse_property_string($rng_fmt, $value) };
+ warn $@ if $@;
+ return $res;
+}
+
PVE::JSONSchema::register_format('pve-qm-usb-device', \&verify_usb_device);
sub verify_usb_device {
my ($value, $noerr) = @_;
my $prop = shift;
foreach my $opt (keys %$confdesc) {
- next if $opt eq 'parent' || $opt eq 'snaptime' || $opt eq 'vmstate' || $opt eq 'runningmachine';
+ next if $opt eq 'parent' || $opt eq 'snaptime' || $opt eq 'vmstate' ||
+ $opt eq 'runningmachine' || $opt eq 'runningcpu';
$prop->{$opt} = $confdesc->{$opt};
}
if ($conf->{template}) {
# check if any base image is still used by a linked clone
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
return if drive_is_cdrom($drive);
}
# only remove disks owned by this VM
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
return if drive_is_cdrom($drive, 1);
sub check_storage_availability {
my ($storecfg, $conf, $node) = @_;
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
my $volid = $drive->{file};
my $nodehash = { map { $_ => 1 } @$nodelist };
my $nodename = nodename();
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
my $volid = $drive->{file};
my $nodelist = PVE::Cluster::get_nodelist();
my $nodehash = { map { $_ => {} } @$nodelist };
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
my $volid = $drive->{file};
return $vzlist;
}
-sub disksize {
- my ($storecfg, $conf) = @_;
-
- my $bootdisk = $conf->{bootdisk};
- return undef if !$bootdisk;
- return undef if !is_valid_drivename($bootdisk);
-
- return undef if !$conf->{$bootdisk};
-
- my $drive = parse_drive($bootdisk, $conf->{$bootdisk});
- return undef if !defined($drive);
-
- return undef if drive_is_cdrom($drive);
-
- my $volid = $drive->{file};
- return undef if !$volid;
-
- return $drive->{size};
-}
-
our $vmstatus_return_properties = {
vmid => get_standard_option('pve-vmid'),
status => {
# fixme: better status?
$d->{status} = $list->{$vmid}->{pid} ? 'running' : 'stopped';
- my $size = disksize($storecfg, $conf);
+ my $size = PVE::QemuServer::Drive::bootdisk_size($storecfg, $conf);
if (defined($size)) {
$d->{disk} = 0; # no info available
$d->{maxdisk} = $size;
return $res;
}
-sub foreach_drive {
- my ($conf, $func, @param) = @_;
-
- foreach my $ds (valid_drive_names()) {
- next if !defined($conf->{$ds});
-
- my $drive = parse_drive($ds, $conf->{$ds});
- next if !$drive;
-
- &$func($ds, $drive, @param);
- }
-}
-
-sub foreach_volid {
- my ($conf, $func, @param) = @_;
-
- my $volhash = {};
-
- my $test_volid = sub {
- my ($volid, $is_cdrom, $replicate, $shared, $snapname, $size) = @_;
-
- return if !$volid;
-
- $volhash->{$volid}->{cdrom} //= 1;
- $volhash->{$volid}->{cdrom} = 0 if !$is_cdrom;
-
- $volhash->{$volid}->{replicate} //= 0;
- $volhash->{$volid}->{replicate} = 1 if $replicate;
-
- $volhash->{$volid}->{shared} //= 0;
- $volhash->{$volid}->{shared} = 1 if $shared;
-
- $volhash->{$volid}->{referenced_in_config} //= 0;
- $volhash->{$volid}->{referenced_in_config} = 1 if !defined($snapname);
-
- $volhash->{$volid}->{referenced_in_snapshot}->{$snapname} = 1
- if defined($snapname);
- $volhash->{$volid}->{size} = $size if $size;
- };
-
- foreach_drive($conf, sub {
- my ($ds, $drive) = @_;
- $test_volid->($drive->{file}, drive_is_cdrom($drive), $drive->{replicate} // 1, $drive->{shared}, undef, $drive->{size});
- });
-
- foreach my $snapname (keys %{$conf->{snapshots}}) {
- my $snap = $conf->{snapshots}->{$snapname};
- $test_volid->($snap->{vmstate}, 0, 1, $snapname);
- foreach_drive($snap, sub {
- my ($ds, $drive) = @_;
- $test_volid->($drive->{file}, drive_is_cdrom($drive), $drive->{replicate} // 1, $drive->{shared}, $snapname);
- });
- }
-
- foreach my $volid (keys %$volhash) {
- &$func($volid, $volhash->{$volid}, @param);
- }
-}
-
sub conf_has_serial {
my ($conf) = @_;
};
}
+sub audio_devs {
+ my ($audio, $audiopciaddr, $machine_version) = @_;
+
+ my $devs = [];
+
+ my $id = $audio->{dev_id};
+ my $audiodev = "";
+ if (min_version($machine_version, 4, 2)) {
+ $audiodev = ",audiodev=$audio->{backend_id}";
+ }
+
+ if ($audio->{dev} eq 'AC97') {
+ push @$devs, '-device', "AC97,id=${id}${audiopciaddr}$audiodev";
+ } elsif ($audio->{dev} =~ /intel\-hda$/) {
+ push @$devs, '-device', "$audio->{dev},id=${id}${audiopciaddr}";
+ push @$devs, '-device', "hda-micro,id=${id}-codec0,bus=${id}.0,cad=0$audiodev";
+ push @$devs, '-device', "hda-duplex,id=${id}-codec1,bus=${id}.0,cad=1$audiodev";
+ } else {
+ die "unkown audio device '$audio->{dev}', implement me!";
+ }
+
+ push @$devs, '-audiodev', "$audio->{backend},id=$audio->{backend_id}";
+
+ return $devs;
+}
+
sub vga_conf_has_spice {
my ($vga) = @_;
};
sub get_vm_machine {
- my ($conf, $forcemachine, $arch, $add_pve_version) = @_;
+ my ($conf, $forcemachine, $arch, $add_pve_version, $kvmversion) = @_;
my $machine = $forcemachine || $conf->{machine};
if (!$machine || $machine =~ m/^(?:pc|q35|virt)$/) {
$arch //= 'x86_64';
$machine ||= $default_machines->{$arch};
- $machine .= "+pve$PVE::QemuServer::Machine::PVE_MACHINE_VERSION" if $add_pve_version;
+ if ($add_pve_version) {
+ $kvmversion //= kvm_user_version();
+ my $pvever = PVE::QemuServer::Machine::get_pve_version($kvmversion);
+ $machine .= "+pve$pvever";
+ }
+ }
+
+ if ($add_pve_version && $machine !~ m/\+pve\d+$/) {
+ # for version-pinned machines that do not include a pve-version (e.g.
+ # pc-q35-4.1), we assume 0 to keep them stable in case we bump
+ $machine .= '+pve0';
}
return $machine;
return $cmd;
}
-sub get_cpu_options {
- my ($conf, $arch, $kvm, $kvm_off, $machine_version, $winversion, $gpu_passthrough) = @_;
+# To use query_supported_cpu_flags and query_understood_cpu_flags to get flags
+# to use in a QEMU command line (-cpu element), first array_intersect the result
+# of query_supported_ with query_understood_. This is necessary because:
+#
+# a) query_understood_ returns flags the host cannot use and
+# b) query_supported_ (rather the QMP call) doesn't actually return CPU
+# flags, but CPU settings - with most of them being flags. Those settings
+# (and some flags, curiously) cannot be specified as a "-cpu" argument.
+#
+# query_supported_ needs to start up to 2 temporary VMs and is therefore rather
+# expensive. If you need the value returned from this, you can get it much
+# cheaper from pmxcfs using PVE::Cluster::get_node_kv('cpuflags-$accel') with
+# $accel being 'kvm' or 'tcg'.
+#
+# pvestatd calls this function on startup and whenever the QEMU/KVM version
+# changes, automatically populating pmxcfs.
+#
+# Returns: { kvm => [ flagX, flagY, ... ], tcg => [ flag1, flag2, ... ] }
+# since kvm and tcg machines support different flags
+#
+sub query_supported_cpu_flags {
+ my ($arch) = @_;
+
+ $arch //= get_host_arch();
+ my $default_machine = $default_machines->{$arch};
- my $cpuFlags = [];
- my $ostype = $conf->{ostype};
+ my $flags = {};
- my $cpu = $kvm ? "kvm64" : "qemu64";
- if ($arch eq 'aarch64') {
- $cpu = 'cortex-a57';
- }
- my $hv_vendor_id;
- if (my $cputype = $conf->{cpu}) {
- my $cpuconf = PVE::JSONSchema::parse_property_string($cpu_fmt, $cputype)
- or die "Cannot parse cpu description: $cputype\n";
- $cpu = $cpuconf->{cputype};
- $kvm_off = 1 if $cpuconf->{hidden};
- $hv_vendor_id = $cpuconf->{'hv-vendor-id'};
+ # FIXME: Once this is merged, the code below should work for ARM as well:
+ # https://lists.nongnu.org/archive/html/qemu-devel/2019-06/msg04947.html
+ die "QEMU/KVM cannot detect CPU flags on ARM (aarch64)\n" if
+ $arch eq "aarch64";
+
+ my $kvm_supported = defined(kvm_version());
+ my $qemu_cmd = get_command_for_arch($arch);
+ my $fakevmid = -1;
+ my $pidfile = PVE::QemuServer::Helpers::pidfile_name($fakevmid);
- if (defined(my $flags = $cpuconf->{flags})) {
- push @$cpuFlags, split(";", $flags);
+ # Start a temporary (frozen) VM with vmid -1 to allow sending a QMP command
+ my $query_supported_run_qemu = sub {
+ my ($kvm) = @_;
+
+ my $flags = {};
+ my $cmd = [
+ $qemu_cmd,
+ '-machine', $default_machine,
+ '-display', 'none',
+ '-chardev', "socket,id=qmp,path=/var/run/qemu-server/$fakevmid.qmp,server,nowait",
+ '-mon', 'chardev=qmp,mode=control',
+ '-pidfile', $pidfile,
+ '-S', '-daemonize'
+ ];
+
+ if (!$kvm) {
+ push @$cmd, '-accel', 'tcg';
}
- }
- push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64' && $arch eq 'x86_64';
+ my $rc = run_command($cmd, noerr => 1, quiet => 0);
+ die "QEMU flag querying VM exited with code " . $rc if $rc;
- push @$cpuFlags , '-x2apic' if $ostype && $ostype eq 'solaris';
+ eval {
+ my $cmd_result = mon_cmd(
+ $fakevmid,
+ 'query-cpu-model-expansion',
+ type => 'full',
+ model => { name => 'host' }
+ );
+
+ my $props = $cmd_result->{model}->{props};
+ foreach my $prop (keys %$props) {
+ next if $props->{$prop} ne '1';
+ # QEMU returns some flags multiple times, with '_', '.' or '-'
+ # (e.g. lahf_lm and lahf-lm; sse4.2, sse4-2 and sse4_2; ...).
+ # We only keep those with underscores, to match /proc/cpuinfo
+ $prop =~ s/\.|-/_/g;
+ $flags->{$prop} = 1;
+ }
+ };
+ my $err = $@;
- push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
+ # force stop with 10 sec timeout and 'nocheck'
+ # always stop, even if QMP failed
+ vm_stop(undef, $fakevmid, 1, 1, 10, 0, 1);
- push @$cpuFlags, '-rdtscp' if $cpu =~ m/^Opteron/;
+ die $err if $err;
- if (min_version($machine_version, 2, 3) && $arch eq 'x86_64') {
+ return [ sort keys %$flags ];
+ };
- push @$cpuFlags , '+kvm_pv_unhalt' if $kvm;
- push @$cpuFlags , '+kvm_pv_eoi' if $kvm;
- }
+ # We need to query QEMU twice, since KVM and TCG have different supported flags
+ PVE::QemuConfig->lock_config($fakevmid, sub {
+ $flags->{tcg} = eval { $query_supported_run_qemu->(0) };
+ warn "warning: failed querying supported tcg flags: $@\n" if $@;
- add_hyperv_enlightenments($cpuFlags, $winversion, $machine_version, $conf->{bios}, $gpu_passthrough, $hv_vendor_id) if $kvm;
+ if ($kvm_supported) {
+ $flags->{kvm} = eval { $query_supported_run_qemu->(1) };
+ warn "warning: failed querying supported kvm flags: $@\n" if $@;
+ }
+ });
- push @$cpuFlags, 'enforce' if $cpu ne 'host' && $kvm && $arch eq 'x86_64';
+ return $flags;
+}
- push @$cpuFlags, 'kvm=off' if $kvm_off;
+# Understood CPU flags are written to a file at 'pve-qemu' compile time
+my $understood_cpu_flag_dir = "/usr/share/kvm";
+sub query_understood_cpu_flags {
+ my $arch = get_host_arch();
+ my $filepath = "$understood_cpu_flag_dir/recognized-CPUID-flags-$arch";
- if (my $cpu_vendor = $cpu_vendor_list->{$cpu}) {
- push @$cpuFlags, "vendor=${cpu_vendor}"
- if $cpu_vendor ne 'default';
- } elsif ($arch ne 'aarch64') {
- die "internal error"; # should not happen
- }
+ die "Cannot query understood QEMU CPU flags for architecture: $arch (file not found)\n"
+ if ! -e $filepath;
- $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
+ my $raw = file_get_contents($filepath);
+ $raw =~ s/^\s+|\s+$//g;
+ my @flags = split(/\s+/, $raw);
- return ('-cpu', $cpu);
+ return \@flags;
}
sub config_to_command {
- my ($storecfg, $vmid, $conf, $defaults, $forcemachine) = @_;
+ my ($storecfg, $vmid, $conf, $defaults, $forcemachine, $forcecpu) = @_;
my $cmd = [];
my $globalFlags = [];
my $devices = [];
my $pciaddr = '';
my $bridges = {};
- my $vernum = 0; # unknown
my $ostype = $conf->{ostype};
my $winversion = windows_version($ostype);
my $kvm = $conf->{kvm};
my $kvm_binary = get_command_for_arch($arch);
my $kvmver = kvm_user_version($kvm_binary);
+ if (!$kvmver || $kvmver !~ m/^(\d+)\.(\d+)/ || $1 < 3) {
+ $kvmver //= "undefined";
+ die "Detected old QEMU binary ('$kvmver', at least 3.0 is required)\n";
+ }
+
my $add_pve_version = min_version($kvmver, 4, 1);
my $machine_type = get_vm_machine($conf, $forcemachine, $arch, $add_pve_version);
$kvm //= 1 if is_native($arch);
$machine_version =~ m/(\d+)\.(\d+)/;
- die "Installed QEMU version '$kvmver' is too old to run machine type '$machine_type', please upgrade node '$nodename'\n"
- if !PVE::QemuServer::min_version($kvmver, $1, $2);
+ my ($machine_major, $machine_minor) = ($1, $2);
+
+ if ($kvmver =~ m/^\d+\.\d+\.(\d+)/ && $1 >= 90) {
+ warn "warning: Installed QEMU version ($kvmver) is a release candidate, ignoring version checks\n";
+ } elsif (!min_version($kvmver, $machine_major, $machine_minor)) {
+ die "Installed QEMU version '$kvmver' is too old to run machine type '$machine_type', please upgrade node '$nodename'\n"
+ } elsif (!PVE::QemuServer::Machine::can_run_pve_machine_version($machine_version, $kvmver)) {
+ my $max_pve_version = PVE::QemuServer::Machine::get_pve_version($machine_version);
+ die "Installed qemu-server (max feature level for $machine_major.$machine_minor is pve$max_pve_version)"
+ ." is too old to run machine type '$machine_type', please upgrade node '$nodename'\n";
+ }
+
+ # if a specific +pve version is required for a feature, use $version_guard
+ # instead of min_version to allow machines to be run with the minimum
+ # required version
+ my $required_pve_version = 0;
+ my $version_guard = sub {
+ my ($major, $minor, $pve) = @_;
+ return 0 if !min_version($machine_version, $major, $minor, $pve);
+ my $max_pve = PVE::QemuServer::Machine::get_pve_version("$major.$minor");
+ return 1 if min_version($machine_version, $major, $minor, $max_pve+1);
+ $required_pve_version = $pve if $pve && $pve > $required_pve_version;
+ return 1;
+ };
if ($kvm) {
die "KVM virtualisation configured, but not available. Either disable in VM configuration or enable in BIOS.\n"
if !defined kvm_version();
}
- if ($kvmver =~ m/^(\d+)\.(\d+)$/) {
- $vernum = $1*1000000+$2*1000;
- } elsif ($kvmver =~ m/^(\d+)\.(\d+)\.(\d+)$/) {
- $vernum = $1*1000000+$2*1000+$3;
- }
-
- die "detected old qemu-kvm binary ($kvmver)\n" if $vernum < 15000;
-
my $q35 = PVE::QemuServer::Machine::machine_type_is_q35($conf);
my $hotplug_features = parse_hotplug_features(defined($conf->{hotplug}) ? $conf->{hotplug} : '1');
my $use_old_bios_files = undef;
}
}
- if ($conf->{vmgenid}) {
- push @$devices, '-device', 'vmgenid,guid='.$conf->{vmgenid};
- }
-
- my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch);
if ($conf->{bios} && $conf->{bios} eq 'ovmf') {
- die "uefi base image not found\n" if ! -f $ovmf_code;
+ my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch);
+ die "uefi base image '$ovmf_code' not found\n" if ! -f $ovmf_code;
- my $path;
- my $format;
+ my ($path, $format);
if (my $efidisk = $conf->{efidisk0}) {
- my $d = PVE::JSONSchema::parse_property_string($efidisk_fmt, $efidisk);
+ my $d = parse_drive('efidisk0', $efidisk);
my ($storeid, $volname) = PVE::Storage::parse_volume_id($d->{file}, 1);
$format = $d->{format};
if ($storeid) {
$format = 'raw';
}
+ my $size_str = "";
+
+ if ($format eq 'raw' && $version_guard->(4, 1, 2)) {
+ $size_str = ",size=" . (-s $ovmf_vars);
+ }
+
push @$cmd, '-drive', "if=pflash,unit=0,format=raw,readonly,file=$ovmf_code";
- push @$cmd, '-drive', "if=pflash,unit=1,format=$format,id=drive-efidisk0,file=$path";
+ push @$cmd, '-drive', "if=pflash,unit=1,format=$format,id=drive-efidisk0$size_str,file=$path";
}
# load q35 config
}
}
+ if ($conf->{vmgenid}) {
+ push @$devices, '-device', 'vmgenid,guid='.$conf->{vmgenid};
+ }
+
# add usb controllers
my @usbcontrollers = PVE::QemuServer::USB::get_usb_controllers($conf, $bridges, $arch, $machine_type, $usbdesc->{format}, $MAX_USB_DEVICES);
push @$devices, @usbcontrollers if @usbcontrollers;
push @$devices, '-device', $kbd if defined($kbd);
}
- my $kvm_off = 0;
- my $gpu_passthrough;
-
- # host pci devices
- for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
- my $id = "hostpci$i";
- my $d = parse_hostpci($conf->{$id});
- next if !$d;
-
- if (my $pcie = $d->{pcie}) {
- die "q35 machine model is not enabled" if !$q35;
- # win7 wants to have the pcie devices directly on the pcie bus
- # instead of in the root port
- if ($winversion == 7) {
- $pciaddr = print_pcie_addr("${id}bus0");
- } else {
- # add more root ports if needed, 4 are present by default
- # by pve-q35 cfgs, rest added here on demand.
- if ($i > 3) {
- push @$devices, '-device', print_pcie_root_port($i);
- }
- $pciaddr = print_pcie_addr($id);
- }
- } else {
- $pciaddr = print_pci_addr($id, $bridges, $arch, $machine_type);
- }
-
- my $xvga = '';
- if ($d->{'x-vga'}) {
- $xvga = ',x-vga=on' if !($conf->{bios} && $conf->{bios} eq 'ovmf');
- $kvm_off = 1;
- $vga->{type} = 'none' if !defined($conf->{vga});
- $gpu_passthrough = 1;
- }
-
- my $pcidevices = $d->{pciid};
- my $multifunction = 1 if @$pcidevices > 1;
-
- my $sysfspath;
- if ($d->{mdev} && scalar(@$pcidevices) == 1) {
- my $pci_id = $pcidevices->[0]->{id};
- my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
- $sysfspath = "/sys/bus/pci/devices/$pci_id/$uuid";
- } elsif ($d->{mdev}) {
- warn "ignoring mediated device '$id' with multifunction device\n";
- }
-
- my $j=0;
- foreach my $pcidevice (@$pcidevices) {
- my $devicestr = "vfio-pci";
-
- if ($sysfspath) {
- $devicestr .= ",sysfsdev=$sysfspath";
- } else {
- $devicestr .= ",host=$pcidevice->{id}";
- }
-
- my $mf_addr = $multifunction ? ".$j" : '';
- $devicestr .= ",id=${id}${mf_addr}${pciaddr}${mf_addr}";
-
- if ($j == 0) {
- $devicestr .= ',rombar=0' if defined($d->{rombar}) && !$d->{rombar};
- $devicestr .= "$xvga";
- $devicestr .= ",multifunction=on" if $multifunction;
- $devicestr .= ",romfile=/usr/share/kvm/$d->{romfile}" if $d->{romfile};
- }
-
- push @$devices, '-device', $devicestr;
- $j++;
- }
- }
+ # host pci device passthrough
+ my ($kvm_off, $gpu_passthrough, $legacy_igd) = PVE::QemuServer::PCI::print_hostpci_devices(
+ $conf, $devices, $winversion, $q35, $bridges, $arch, $machine_type);
# usb devices
my $usb_dev_features = {};
}
}
- if (my $audio = conf_has_audio($conf)) {
-
+ if (min_version($machine_version, 4, 0) && (my $audio = conf_has_audio($conf))) {
my $audiopciaddr = print_pci_addr("audio0", $bridges, $arch, $machine_type);
-
- my $id = $audio->{dev_id};
- if ($audio->{dev} eq 'AC97') {
- push @$devices, '-device', "AC97,id=${id}${audiopciaddr}";
- } elsif ($audio->{dev} =~ /intel\-hda$/) {
- push @$devices, '-device', "$audio->{dev},id=${id}${audiopciaddr}";
- push @$devices, '-device', "hda-micro,id=${id}-codec0,bus=${id}.0,cad=0";
- push @$devices, '-device', "hda-duplex,id=${id}-codec1,bus=${id}.0,cad=1";
- } else {
- die "unkown audio device '$audio->{dev}', implement me!";
- }
-
- push @$devices, '-audiodev', "$audio->{backend},id=$audio->{backend_id}";
+ my $audio_devs = audio_devs($audio, $audiopciaddr, $machine_version);
+ push @$devices, @$audio_devs;
}
my $sockets = 1;
# time drift fix
my $tdf = defined($conf->{tdf}) ? $conf->{tdf} : $defaults->{tdf};
-
my $useLocaltime = $conf->{localtime};
if ($winversion >= 5) { # windows
push @$rtcFlags, 'driftfix=slew' if $tdf;
- if (!$kvm) {
- push @$machineFlags, 'accel=tcg';
- }
-
- if ($machine_type) {
- push @$machineFlags, "type=${machine_type}";
- }
-
- if (($conf->{startdate}) && ($conf->{startdate} ne 'now')) {
+ if ($conf->{startdate} && $conf->{startdate} ne 'now') {
push @$rtcFlags, "base=$conf->{startdate}";
} elsif ($useLocaltime) {
push @$rtcFlags, 'base=localtime';
}
- push @$cmd, get_cpu_options($conf, $arch, $kvm, $kvm_off, $machine_version, $winversion, $gpu_passthrough);
+ if ($forcecpu) {
+ push @$cmd, '-cpu', $forcecpu;
+ } else {
+ push @$cmd, get_cpu_options($conf, $arch, $kvm, $kvm_off, $machine_version, $winversion, $gpu_passthrough);
+ }
PVE::QemuServer::Memory::config($conf, $vmid, $sockets, $cores, $defaults, $hotplug_features, $cmd);
}
}
+ my $rng = parse_rng($conf->{rng0}) if $conf->{rng0};
+ if ($rng && &$version_guard(4, 1, 2)) {
+ check_rng_source($rng->{source});
+
+ my $max_bytes = $rng->{max_bytes} // $rng_fmt->{max_bytes}->{default};
+ my $period = $rng->{period} // $rng_fmt->{period}->{default};
+ my $limiter_str = "";
+ if ($max_bytes) {
+ $limiter_str = ",max-bytes=$max_bytes,period=$period";
+ }
+
+ my $rng_addr = print_pci_addr("rng0", $bridges, $arch, $machine_type);
+ push @$devices, '-object', "rng-random,filename=$rng->{source},id=rng0";
+ push @$devices, '-device', "virtio-rng-pci,rng=rng0$limiter_str$rng_addr";
+ }
+
my $spice_port;
if ($qxlnum) {
if ($qxlnum > 1) {
if ($winversion){
- for(my $i = 1; $i < $qxlnum; $i++){
+ for (my $i = 1; $i < $qxlnum; $i++){
push @$devices, '-device', print_vga_device($conf, $vga, $arch, $machine_version, $machine_type, $i, $qxlnum, $bridges);
}
} else {
push @$devices, '-iscsi', "initiator-name=$initiator";
}
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
if (PVE::Storage::parse_volume_id($drive->{file}, 1)) {
}
}
- if($drive->{interface} eq 'virtio'){
+ if ($drive->{interface} eq 'virtio'){
push @$cmd, '-object', "iothread,id=iothread-$ds" if $drive->{iothread};
}
- if ($drive->{interface} eq 'scsi') {
+ if ($drive->{interface} eq 'scsi') {
my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $drive);
+ die "scsi$drive->{index}: machine version 4.1~pve2 or higher is required to use more than 14 SCSI disks\n"
+ if $drive->{index} > 13 && !&$version_guard(4, 1, 2);
+
$pciaddr = print_pci_addr("$controller_prefix$controller", $bridges, $arch, $machine_type);
my $scsihw_type = $scsihw =~ m/^virtio-scsi-single/ ? "virtio-scsi-pci" : $scsihw;
push @$devices, '-device', "$scsihw_type,id=$controller_prefix$controller$pciaddr$iothread$queues" if !$scsicontroller->{$controller};
$scsicontroller->{$controller}=1;
- }
+ }
if ($drive->{interface} eq 'sata') {
- my $controller = int($drive->{index} / $MAX_SATA_DISKS);
- $pciaddr = print_pci_addr("ahci$controller", $bridges, $arch, $machine_type);
- push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
- $ahcicontroller->{$controller}=1;
+ my $controller = int($drive->{index} / $PVE::QemuServer::Drive::MAX_SATA_DISKS);
+ $pciaddr = print_pci_addr("ahci$controller", $bridges, $arch, $machine_type);
+ push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
+ $ahcicontroller->{$controller}=1;
}
- my $drive_cmd = print_drive_full($storecfg, $vmid, $drive);
+ my $drive_cmd = print_drive_commandline_full($storecfg, $vmid, $drive);
push @$devices, '-drive',$drive_cmd;
push @$devices, '-device', print_drivedevice_full($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type);
});
for (my $i = 0; $i < $MAX_NETS; $i++) {
- next if !$conf->{"net$i"};
- my $d = parse_net($conf->{"net$i"});
- next if !$d;
+ next if !$conf->{"net$i"};
+ my $d = parse_net($conf->{"net$i"});
+ next if !$d;
- $use_virtio = 1 if $d->{model} eq 'virtio';
+ $use_virtio = 1 if $d->{model} eq 'virtio';
- if ($bootindex_hash->{n}) {
- $d->{bootindex} = $bootindex_hash->{n};
- $bootindex_hash->{n} += 1;
- }
+ if ($bootindex_hash->{n}) {
+ $d->{bootindex} = $bootindex_hash->{n};
+ $bootindex_hash->{n} += 1;
+ }
- my $netdevfull = print_netdev_full($vmid, $conf, $arch, $d, "net$i");
- push @$devices, '-netdev', $netdevfull;
+ my $netdevfull = print_netdev_full($vmid, $conf, $arch, $d, "net$i");
+ push @$devices, '-netdev', $netdevfull;
- my $netdevicefull = print_netdevice_full($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files, $arch, $machine_type);
- push @$devices, '-device', $netdevicefull;
+ my $netdevicefull = print_netdevice_full($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files, $arch, $machine_type);
+ push @$devices, '-device', $netdevicefull;
}
if ($conf->{ivshmem}) {
push @$devices, '-object', "memory-backend-file,id=ivshmem,share=on,mem-path=$path,size=$ivshmem->{size}M";
}
+ # pci.4 is nested in pci.1
+ $bridges->{1} = 1 if $bridges->{4};
+
if (!$q35) {
# add pci bridges
if (min_version($machine_version, 2, 3)) {
$bridges->{3} = 1 if $scsihw =~ m/^virtio-scsi-single/;
- for my $k (sort {$b cmp $a} keys %$bridges) {
- $pciaddr = print_pci_addr("pci.$k", undef, $arch, $machine_type);
- unshift @$devices, '-device', "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
+ }
+
+ for my $k (sort {$b cmp $a} keys %$bridges) {
+ next if $q35 && $k < 4; # q35.cfg already includes bridges up to 3
+
+ my $k_name = $k;
+ if ($k == 2 && $legacy_igd) {
+ $k_name = "$k-igd";
+ }
+ $pciaddr = print_pci_addr("pci.$k_name", undef, $arch, $machine_type);
+
+ my $devstr = "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr";
+ if ($q35) {
+ # add after -readconfig pve-q35.cfg
+ splice @$devices, 2, 0, '-device', $devstr;
+ } else {
+ unshift @$devices, '-device', $devstr if $k > 0;
}
}
+ if (!$kvm) {
+ push @$machineFlags, 'accel=tcg';
+ }
+
+ my $machine_type_min = $machine_type;
+ if ($add_pve_version) {
+ $machine_type_min =~ s/\+pve\d+$//;
+ $machine_type_min .= "+pve$required_pve_version";
+ }
+ push @$machineFlags, "type=${machine_type_min}";
+
push @$cmd, @$devices;
- push @$cmd, '-rtc', join(',', @$rtcFlags)
- if scalar(@$rtcFlags);
- push @$cmd, '-machine', join(',', @$machineFlags)
- if scalar(@$machineFlags);
- push @$cmd, '-global', join(',', @$globalFlags)
- if scalar(@$globalFlags);
+ push @$cmd, '-rtc', join(',', @$rtcFlags) if scalar(@$rtcFlags);
+ push @$cmd, '-machine', join(',', @$machineFlags) if scalar(@$machineFlags);
+ push @$cmd, '-global', join(',', @$globalFlags) if scalar(@$globalFlags);
if (my $vmstate = $conf->{vmstate}) {
my $statepath = PVE::Storage::path($storecfg, $vmstate);
return wantarray ? ($cmd, $vollist, $spice_port) : $cmd;
}
+sub check_rng_source {
+ my ($source) = @_;
+
+ # mostly relevant for /dev/hwrng, but doesn't hurt to check others too
+ die "cannot create VirtIO RNG device: source file '$source' doesn't exist\n"
+ if ! -e $source;
+
+ my $rng_current = '/sys/devices/virtual/misc/hw_random/rng_current';
+ if ($source eq '/dev/hwrng' && file_read_firstline($rng_current) eq 'none') {
+ # Needs to abort, otherwise QEMU crashes on first rng access.
+ # Note that rng_current cannot be changed to 'none' manually, so
+ # once the VM is past this point, it is no longer an issue.
+ die "Cannot start VM with passed-through RNG device: '/dev/hwrng'"
+ . " exists, but '$rng_current' is set to 'none'. Ensure that"
+ . " a compatible hardware-RNG is attached to the host.\n";
+ }
+}
+
sub spice_port {
my ($vmid) = @_;
sub qemu_driveadd {
my ($storecfg, $vmid, $device) = @_;
- my $drive = print_drive_full($storecfg, $vmid, $device);
+ my $drive = print_drive_commandline_full($storecfg, $vmid, $device);
$drive =~ s/\\/\\\\/g;
my $ret = PVE::QemuServer::Monitor::hmp_cmd($vmid, "drive_add auto \"$drive\"");
my $devices_list = vm_devices_list($vmid);
foreach my $opt (keys %{$devices_list}) {
- if (PVE::QemuServer::is_valid_drivename($opt)) {
- my $drive = PVE::QemuServer::parse_drive($opt, $conf->{$opt});
+ if (is_valid_drivename($opt)) {
+ my $drive = parse_drive($opt, $conf->{$opt});
if($drive->{interface} eq 'scsi' && $drive->{index} < (($maxdev-1)*($controller+1))) {
return 1;
}
my $netdev = print_netdev_full($vmid, $conf, $arch, $device, $deviceid, 1);
my %options = split(/[=,]/, $netdev);
+ if (defined(my $vhost = $options{vhost})) {
+ $options{vhost} = JSON::boolean(PVE::JSONSchema::parse_boolean($vhost));
+ }
+
+ if (defined(my $queues = $options{queues})) {
+ $options{queues} = $queues + 0;
+ }
+
mon_cmd($vmid, "netdev_add", %options);
return 1;
}
my $retry = 0;
my $currentrunningvcpus = undef;
while (1) {
- $currentrunningvcpus = mon_cmd($vmid, "query-cpus");
+ $currentrunningvcpus = mon_cmd($vmid, "query-cpus-fast");
last if scalar(@{$currentrunningvcpus}) == $i-1;
raise_param_exc({ vcpus => "error unplugging cpu$i" }) if $retry > 5;
$retry++;
return;
}
- my $currentrunningvcpus = mon_cmd($vmid, "query-cpus");
+ my $currentrunningvcpus = mon_cmd($vmid, "query-cpus-fast");
die "vcpus in running vm does not match its configuration\n"
if scalar(@{$currentrunningvcpus}) != $currentvcpus;
my $retry = 0;
my $currentrunningvcpus = undef;
while (1) {
- $currentrunningvcpus = mon_cmd($vmid, "query-cpus");
+ $currentrunningvcpus = mon_cmd($vmid, "query-cpus-fast");
last if scalar(@{$currentrunningvcpus}) == $i;
raise_param_exc({ vcpus => "error hotplugging cpu$i" }) if $retry > 10;
sleep 1;
return if !$running;
+ my $padding = (1024 - $size % 1024) % 1024;
+ $size = $size + $padding;
+
mon_cmd($vmid, "block_resize", device => $deviceid, size => int($size));
}
$running = undef;
my $conf = PVE::QemuConfig->load_config($vmid);
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
$running = 1 if $drive->{file} eq $volid;
});
mon_cmd($vmid, "migrate-set-capabilities", capabilities => $cap_ref);
}
-my $fast_plug_option = {
- 'lock' => 1,
- 'name' => 1,
- 'onboot' => 1,
- 'shares' => 1,
- 'startup' => 1,
- 'description' => 1,
- 'protection' => 1,
- 'vmstatestorage' => 1,
+sub foreach_volid {
+ my ($conf, $func, @param) = @_;
+
+ my $volhash = {};
+
+ my $test_volid = sub {
+ my ($key, $drive, $snapname) = @_;
+
+ my $volid = $drive->{file};
+ return if !$volid;
+
+ $volhash->{$volid}->{cdrom} //= 1;
+ $volhash->{$volid}->{cdrom} = 0 if !drive_is_cdrom($drive);
+
+ my $replicate = $drive->{replicate} // 1;
+ $volhash->{$volid}->{replicate} //= 0;
+ $volhash->{$volid}->{replicate} = 1 if $replicate;
+
+ $volhash->{$volid}->{shared} //= 0;
+ $volhash->{$volid}->{shared} = 1 if $drive->{shared};
+
+ $volhash->{$volid}->{referenced_in_config} //= 0;
+ $volhash->{$volid}->{referenced_in_config} = 1 if !defined($snapname);
+
+ $volhash->{$volid}->{referenced_in_snapshot}->{$snapname} = 1
+ if defined($snapname);
+
+ my $size = $drive->{size};
+ $volhash->{$volid}->{size} //= $size if $size;
+
+ $volhash->{$volid}->{is_vmstate} //= 0;
+ $volhash->{$volid}->{is_vmstate} = 1 if $key eq 'vmstate';
+
+ $volhash->{$volid}->{is_unused} //= 0;
+ $volhash->{$volid}->{is_unused} = 1 if $key =~ /^unused\d+$/;
+ };
+
+ my $include_opts = {
+ extra_keys => ['vmstate'],
+ include_unused => 1,
+ };
+
+ PVE::QemuConfig->foreach_volume_full($conf, $include_opts, $test_volid);
+ foreach my $snapname (keys %{$conf->{snapshots}}) {
+ my $snap = $conf->{snapshots}->{$snapname};
+ PVE::QemuConfig->foreach_volume_full($snap, $include_opts, $test_volid, $snapname);
+ }
+
+ foreach my $volid (keys %$volhash) {
+ &$func($volid, $volhash->{$volid}, @param);
+ }
+}
+
+my $fast_plug_option = {
+ 'lock' => 1,
+ 'name' => 1,
+ 'onboot' => 1,
+ 'shares' => 1,
+ 'startup' => 1,
+ 'description' => 1,
+ 'protection' => 1,
+ 'vmstatestorage' => 1,
'hookscript' => 1,
'tags' => 1,
};
if ($changes) {
PVE::QemuConfig->write_config($vmid, $conf);
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
}
my $hotplug_features = parse_hotplug_features(defined($conf->{hotplug}) ? $conf->{hotplug} : '1');
if (my $err = $@) {
&$add_error($opt, $err) if $err ne "skip\n";
} else {
- # save new config if hotplug was successful
delete $conf->{$opt};
PVE::QemuConfig->remove_from_pending_delete($conf, $opt);
- PVE::QemuConfig->write_config($vmid, $conf);
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
}
}
&$apply_pending_cloudinit($opt, $value);
}
vmconfig_update_disk($storecfg, $conf, $hotplug_features->{disk},
- $vmid, $opt, $value, 1, $arch, $machine_type);
+ $vmid, $opt, $value, $arch, $machine_type);
} elsif ($opt =~ m/^memory$/) { #dimms
die "skip\n" if !$hotplug_features->{memory};
$value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt, $value);
if (my $err = $@) {
&$add_error($opt, $err) if $err ne "skip\n";
} else {
- # save new config if hotplug was successful
$conf->{$opt} = $value;
delete $conf->{pending}->{$opt};
- PVE::QemuConfig->write_config($vmid, $conf);
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
}
}
+
+ PVE::QemuConfig->write_config($vmid, $conf);
}
sub try_deallocate_drive {
# check if the disk is really unused
die "unable to delete '$volid' - volume is still in use (snapshot?)\n"
- if is_volume_in_use($storecfg, $conf, $key, $volid);
+ if PVE::QemuServer::Drive::is_volume_in_use($storecfg, $conf, $key, $volid);
PVE::Storage::vdisk_free($storecfg, $volid);
return 1;
} else {
sub vmconfig_apply_pending {
- my ($vmid, $conf, $storecfg) = @_;
+ my ($vmid, $conf, $storecfg, $errors) = @_;
+
+ my $add_apply_error = sub {
+ my ($opt, $msg) = @_;
+ my $err_msg = "unable to apply pending change $opt : $msg";
+ $errors->{$opt} = $err_msg;
+ warn $err_msg;
+ };
# cold plug
my $pending_delete_hash = PVE::QemuConfig->parse_pending_delete($conf->{pending}->{delete});
foreach my $opt (sort keys %$pending_delete_hash) {
- die "internal error" if $opt =~ m/^unused/;
my $force = $pending_delete_hash->{$opt}->{force};
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
- if (!defined($conf->{$opt})) {
- PVE::QemuConfig->remove_from_pending_delete($conf, $opt);
- PVE::QemuConfig->write_config($vmid, $conf);
- } elsif (is_valid_drivename($opt)) {
- vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
- PVE::QemuConfig->remove_from_pending_delete($conf, $opt);
- delete $conf->{$opt};
- PVE::QemuConfig->write_config($vmid, $conf);
+ eval {
+ if ($opt =~ m/^unused/) {
+ die "internal error";
+ } elsif (defined($conf->{$opt}) && is_valid_drivename($opt)) {
+ vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
+ }
+ };
+ if (my $err = $@) {
+ $add_apply_error->($opt, $err);
} else {
PVE::QemuConfig->remove_from_pending_delete($conf, $opt);
delete $conf->{$opt};
- PVE::QemuConfig->write_config($vmid, $conf);
}
}
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
+ PVE::QemuConfig->cleanup_pending($conf);
foreach my $opt (keys %{$conf->{pending}}) { # add/change
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
-
- if (defined($conf->{$opt}) && ($conf->{$opt} eq $conf->{pending}->{$opt})) {
- # skip if nothing changed
- } elsif (is_valid_drivename($opt)) {
- vmconfig_register_unused_drive($storecfg, $vmid, $conf, parse_drive($opt, $conf->{$opt}))
- if defined($conf->{$opt});
- $conf->{$opt} = $conf->{pending}->{$opt};
+ next if $opt eq 'delete'; # just to be sure
+ eval {
+ if (defined($conf->{$opt}) && is_valid_drivename($opt)) {
+ vmconfig_register_unused_drive($storecfg, $vmid, $conf, parse_drive($opt, $conf->{$opt}))
+ }
+ };
+ if (my $err = $@) {
+ $add_apply_error->($opt, $err);
} else {
- $conf->{$opt} = $conf->{pending}->{$opt};
+ $conf->{$opt} = delete $conf->{pending}->{$opt};
}
-
- delete $conf->{pending}->{$opt};
- PVE::QemuConfig->write_config($vmid, $conf);
}
-}
-my $safe_num_ne = sub {
- my ($a, $b) = @_;
-
- return 0 if !defined($a) && !defined($b);
- return 1 if !defined($a);
- return 1 if !defined($b);
-
- return $a != $b;
-};
-
-my $safe_string_ne = sub {
- my ($a, $b) = @_;
-
- return 0 if !defined($a) && !defined($b);
- return 1 if !defined($a);
- return 1 if !defined($b);
-
- return $a ne $b;
-};
+ # write all changes at once to avoid unnecessary i/o
+ PVE::QemuConfig->write_config($vmid, $conf);
+}
sub vmconfig_update_net {
my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $arch, $machine_type) = @_;
if ($conf->{$opt}) {
my $oldnet = parse_net($conf->{$opt});
- if (&$safe_string_ne($oldnet->{model}, $newnet->{model}) ||
- &$safe_string_ne($oldnet->{macaddr}, $newnet->{macaddr}) ||
- &$safe_num_ne($oldnet->{queues}, $newnet->{queues}) ||
+ if (safe_string_ne($oldnet->{model}, $newnet->{model}) ||
+ safe_string_ne($oldnet->{macaddr}, $newnet->{macaddr}) ||
+ safe_num_ne($oldnet->{queues}, $newnet->{queues}) ||
!($newnet->{bridge} && $oldnet->{bridge})) { # bridge/nat mode change
# for non online change, we try to hot-unplug
die "internal error" if $opt !~ m/net(\d+)/;
my $iface = "tap${vmid}i$1";
- if (&$safe_string_ne($oldnet->{bridge}, $newnet->{bridge}) ||
- &$safe_num_ne($oldnet->{tag}, $newnet->{tag}) ||
- &$safe_string_ne($oldnet->{trunks}, $newnet->{trunks}) ||
- &$safe_num_ne($oldnet->{firewall}, $newnet->{firewall})) {
+ if (safe_string_ne($oldnet->{bridge}, $newnet->{bridge}) ||
+ safe_num_ne($oldnet->{tag}, $newnet->{tag}) ||
+ safe_string_ne($oldnet->{trunks}, $newnet->{trunks}) ||
+ safe_num_ne($oldnet->{firewall}, $newnet->{firewall})) {
PVE::Network::tap_unplug($iface);
- PVE::Network::tap_plug($iface, $newnet->{bridge}, $newnet->{tag}, $newnet->{firewall}, $newnet->{trunks}, $newnet->{rate});
- } elsif (&$safe_num_ne($oldnet->{rate}, $newnet->{rate})) {
+
+ if ($have_sdn) {
+ PVE::Network::SDN::Zones::tap_plug($iface, $newnet->{bridge}, $newnet->{tag}, $newnet->{firewall}, $newnet->{trunks}, $newnet->{rate});
+ } else {
+ PVE::Network::tap_plug($iface, $newnet->{bridge}, $newnet->{tag}, $newnet->{firewall}, $newnet->{trunks}, $newnet->{rate});
+ }
+ } elsif (safe_num_ne($oldnet->{rate}, $newnet->{rate})) {
# Rate can be applied on its own but any change above needs to
# include the rate in tap_plug since OVS resets everything.
PVE::Network::tap_rate_limit($iface, $newnet->{rate});
}
- if (&$safe_string_ne($oldnet->{link_down}, $newnet->{link_down})) {
+ if (safe_string_ne($oldnet->{link_down}, $newnet->{link_down})) {
qemu_set_link_status($vmid, $opt, !$newnet->{link_down});
}
}
sub vmconfig_update_disk {
- my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $force, $arch, $machine_type) = @_;
-
- # fixme: do we need force?
+ my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $arch, $machine_type) = @_;
my $drive = parse_drive($opt, $value);
# update existing disk
# skip non hotpluggable value
- if (&$safe_string_ne($drive->{discard}, $old_drive->{discard}) ||
- &$safe_string_ne($drive->{iothread}, $old_drive->{iothread}) ||
- &$safe_string_ne($drive->{queues}, $old_drive->{queues}) ||
- &$safe_string_ne($drive->{cache}, $old_drive->{cache})) {
+ if (safe_string_ne($drive->{discard}, $old_drive->{discard}) ||
+ safe_string_ne($drive->{iothread}, $old_drive->{iothread}) ||
+ safe_string_ne($drive->{queues}, $old_drive->{queues}) ||
+ safe_string_ne($drive->{cache}, $old_drive->{cache}) ||
+ safe_string_ne($drive->{ssd}, $old_drive->{ssd})) {
die "skip\n";
}
# apply throttle
- if (&$safe_num_ne($drive->{mbps}, $old_drive->{mbps}) ||
- &$safe_num_ne($drive->{mbps_rd}, $old_drive->{mbps_rd}) ||
- &$safe_num_ne($drive->{mbps_wr}, $old_drive->{mbps_wr}) ||
- &$safe_num_ne($drive->{iops}, $old_drive->{iops}) ||
- &$safe_num_ne($drive->{iops_rd}, $old_drive->{iops_rd}) ||
- &$safe_num_ne($drive->{iops_wr}, $old_drive->{iops_wr}) ||
- &$safe_num_ne($drive->{mbps_max}, $old_drive->{mbps_max}) ||
- &$safe_num_ne($drive->{mbps_rd_max}, $old_drive->{mbps_rd_max}) ||
- &$safe_num_ne($drive->{mbps_wr_max}, $old_drive->{mbps_wr_max}) ||
- &$safe_num_ne($drive->{iops_max}, $old_drive->{iops_max}) ||
- &$safe_num_ne($drive->{iops_rd_max}, $old_drive->{iops_rd_max}) ||
- &$safe_num_ne($drive->{iops_wr_max}, $old_drive->{iops_wr_max}) ||
- &$safe_num_ne($drive->{bps_max_length}, $old_drive->{bps_max_length}) ||
- &$safe_num_ne($drive->{bps_rd_max_length}, $old_drive->{bps_rd_max_length}) ||
- &$safe_num_ne($drive->{bps_wr_max_length}, $old_drive->{bps_wr_max_length}) ||
- &$safe_num_ne($drive->{iops_max_length}, $old_drive->{iops_max_length}) ||
- &$safe_num_ne($drive->{iops_rd_max_length}, $old_drive->{iops_rd_max_length}) ||
- &$safe_num_ne($drive->{iops_wr_max_length}, $old_drive->{iops_wr_max_length})) {
+ if (safe_num_ne($drive->{mbps}, $old_drive->{mbps}) ||
+ safe_num_ne($drive->{mbps_rd}, $old_drive->{mbps_rd}) ||
+ safe_num_ne($drive->{mbps_wr}, $old_drive->{mbps_wr}) ||
+ safe_num_ne($drive->{iops}, $old_drive->{iops}) ||
+ safe_num_ne($drive->{iops_rd}, $old_drive->{iops_rd}) ||
+ safe_num_ne($drive->{iops_wr}, $old_drive->{iops_wr}) ||
+ safe_num_ne($drive->{mbps_max}, $old_drive->{mbps_max}) ||
+ safe_num_ne($drive->{mbps_rd_max}, $old_drive->{mbps_rd_max}) ||
+ safe_num_ne($drive->{mbps_wr_max}, $old_drive->{mbps_wr_max}) ||
+ safe_num_ne($drive->{iops_max}, $old_drive->{iops_max}) ||
+ safe_num_ne($drive->{iops_rd_max}, $old_drive->{iops_rd_max}) ||
+ safe_num_ne($drive->{iops_wr_max}, $old_drive->{iops_wr_max}) ||
+ safe_num_ne($drive->{bps_max_length}, $old_drive->{bps_max_length}) ||
+ safe_num_ne($drive->{bps_rd_max_length}, $old_drive->{bps_rd_max_length}) ||
+ safe_num_ne($drive->{bps_wr_max_length}, $old_drive->{bps_wr_max_length}) ||
+ safe_num_ne($drive->{iops_max_length}, $old_drive->{iops_max_length}) ||
+ safe_num_ne($drive->{iops_rd_max_length}, $old_drive->{iops_rd_max_length}) ||
+ safe_num_ne($drive->{iops_wr_max_length}, $old_drive->{iops_wr_max_length})) {
qemu_block_set_io_throttle($vmid,"drive-$opt",
($drive->{mbps} || 0)*1024*1024,
} else { # cdrom
if ($drive->{file} eq 'none') {
- mon_cmd($vmid, "eject",force => JSON::true,device => "drive-$opt");
+ mon_cmd($vmid, "eject", force => JSON::true, id => "$opt");
if (drive_is_cloudinit($old_drive)) {
vmconfig_register_unused_drive($storecfg, $vmid, $conf, $old_drive);
}
} else {
my $path = get_iso_path($storecfg, $vmid, $drive->{file});
- mon_cmd($vmid, "eject", force => JSON::true,device => "drive-$opt"); # force eject if locked
- mon_cmd($vmid, "change", device => "drive-$opt",target => "$path") if $path;
+
+ # force eject if locked
+ mon_cmd($vmid, "eject", force => JSON::true, id => "$opt");
+
+ if ($path) {
+ mon_cmd($vmid, "blockdev-change-medium",
+ id => "$opt", filename => "$path");
+ }
}
return 1;
vm_deviceplug($storecfg, $conf, $vmid, $opt, $drive, $arch, $machine_type);
}
-sub vm_start {
- my ($storecfg, $vmid, $statefile, $skiplock, $migratedfrom, $paused,
- $forcemachine, $spice_ticket, $migration_network, $migration_type, $targetstorage) = @_;
+# called in locked context by incoming migration
+sub vm_migrate_get_nbd_disks {
+ my ($storecfg, $conf, $replicated_volumes) = @_;
- PVE::QemuConfig->lock_config($vmid, sub {
- my $conf = PVE::QemuConfig->load_config($vmid, $migratedfrom);
+ my $local_volumes = {};
+ PVE::QemuConfig->foreach_volume($conf, sub {
+ my ($ds, $drive) = @_;
- die "you can't start a vm if it's a template\n" if PVE::QemuConfig->is_template($conf);
+ return if drive_is_cdrom($drive);
- my $is_suspended = PVE::QemuConfig->has_lock($conf, 'suspended');
+ my $volid = $drive->{file};
- PVE::QemuConfig->check_lock($conf)
- if !($skiplock || $is_suspended);
+ return if !$volid;
- die "VM $vmid already running\n" if check_running($vmid, undef, $migratedfrom);
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($volid);
- # clean up leftover reboot request files
- eval { clear_reboot_request($vmid); };
- warn $@ if $@;
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+ return if $scfg->{shared};
- if (!$statefile && scalar(keys %{$conf->{pending}})) {
- vmconfig_apply_pending($vmid, $conf, $storecfg);
- $conf = PVE::QemuConfig->load_config($vmid); # update/reload
- }
+ # replicated disks re-use existing state via bitmap
+ my $use_existing = $replicated_volumes->{$volid} ? 1 : 0;
+ $local_volumes->{$ds} = [$volid, $storeid, $volname, $drive, $use_existing];
+ });
+ return $local_volumes;
+}
- PVE::QemuServer::Cloudinit::generate_cloudinitconfig($conf, $vmid);
+# called in locked context by incoming migration
+sub vm_migrate_alloc_nbd_disks {
+ my ($storecfg, $vmid, $source_volumes, $storagemap) = @_;
- my $defaults = load_defaults();
+ my $format = undef;
- # set environment variable useful inside network script
- $ENV{PVE_MIGRATED_FROM} = $migratedfrom if $migratedfrom;
+ my $nbd = {};
+ foreach my $opt (sort keys %$source_volumes) {
+ my ($volid, $storeid, $volname, $drive, $use_existing) = @{$source_volumes->{$opt}};
- my $local_volumes = {};
+ if ($use_existing) {
+ $nbd->{$opt}->{drivestr} = print_drive($drive);
+ $nbd->{$opt}->{volid} = $volid;
+ $nbd->{$opt}->{replicated} = 1;
+ next;
+ }
- if ($targetstorage) {
- foreach_drive($conf, sub {
- my ($ds, $drive) = @_;
+ # If a remote storage is specified and the format of the original
+ # volume is not available there, fall back to the default format.
+ # Otherwise use the same format as the original.
+ if (!$storagemap->{identity}) {
+ $storeid = map_storage($storagemap, $storeid);
+ my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($storecfg, $storeid);
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+ my $fileFormat = qemu_img_format($scfg, $volname);
+ $format = (grep {$fileFormat eq $_} @{$validFormats}) ? $fileFormat : $defFormat;
+ } else {
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+ $format = qemu_img_format($scfg, $volname);
+ }
- return if drive_is_cdrom($drive);
+ my $newvolid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $format, undef, ($drive->{size}/1024));
+ my $newdrive = $drive;
+ $newdrive->{format} = $format;
+ $newdrive->{file} = $newvolid;
+ my $drivestr = print_drive($newdrive);
+ $nbd->{$opt}->{drivestr} = $drivestr;
+ $nbd->{$opt}->{volid} = $newvolid;
+ }
- my $volid = $drive->{file};
+ return $nbd;
+}
- return if !$volid;
+# see vm_start_nolock for parameters, additionally:
+# migrate_opts:
+# storagemap = parsed storage map for allocating NBD disks
+sub vm_start {
+ my ($storecfg, $vmid, $params, $migrate_opts) = @_;
- my ($storeid, $volname) = PVE::Storage::parse_volume_id($volid);
+ return PVE::QemuConfig->lock_config($vmid, sub {
+ my $conf = PVE::QemuConfig->load_config($vmid, $migrate_opts->{migratedfrom});
- my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
- return if $scfg->{shared};
- $local_volumes->{$ds} = [$volid, $storeid, $volname];
- });
+ die "you can't start a vm if it's a template\n" if PVE::QemuConfig->is_template($conf);
- my $format = undef;
+ $params->{resume} = PVE::QemuConfig->has_lock($conf, 'suspended');
- foreach my $opt (sort keys %$local_volumes) {
+ PVE::QemuConfig->check_lock($conf)
+ if !($params->{skiplock} || $params->{resume});
- my ($volid, $storeid, $volname) = @{$local_volumes->{$opt}};
- my $drive = parse_drive($opt, $conf->{$opt});
+ die "VM $vmid already running\n" if check_running($vmid, undef, $migrate_opts->{migratedfrom});
- #if remote storage is specified, use default format
- if ($targetstorage && $targetstorage ne "1") {
- $storeid = $targetstorage;
- my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($storecfg, $storeid);
- $format = $defFormat;
- } else {
- #else we use same format than original
- my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
- $format = qemu_img_format($scfg, $volid);
- }
+ if (my $storagemap = $migrate_opts->{storagemap}) {
+ my $replicated = $migrate_opts->{replicated_volumes};
+ my $disks = vm_migrate_get_nbd_disks($storecfg, $conf, $replicated);
+ $migrate_opts->{nbd} = vm_migrate_alloc_nbd_disks($storecfg, $vmid, $disks, $storagemap);
- my $newvolid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $format, undef, ($drive->{size}/1024));
- my $newdrive = $drive;
- $newdrive->{format} = $format;
- $newdrive->{file} = $newvolid;
- my $drivestr = print_drive($newdrive);
- $local_volumes->{$opt} = $drivestr;
- #pass drive to conf for command line
- $conf->{$opt} = $drivestr;
+ foreach my $opt (keys %{$migrate_opts->{nbd}}) {
+ $conf->{$opt} = $migrate_opts->{nbd}->{$opt}->{drivestr};
}
}
- PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'pre-start', 1);
+ return vm_start_nolock($storecfg, $vmid, $conf, $params, $migrate_opts);
+ });
+}
- if ($is_suspended) {
- # enforce machine type on suspended vm to ensure HW compatibility
- $forcemachine = $conf->{runningmachine};
- print "Resuming suspended VM\n";
- }
- my ($cmd, $vollist, $spice_port) = config_to_command($storecfg, $vmid, $conf, $defaults, $forcemachine);
+# params:
+# statefile => 'tcp', 'unix' for migration or path/volid for RAM state
+# skiplock => 0/1, skip checking for config lock
+# forcemachine => to force Qemu machine (rollback/migration)
+# forcecpu => a QEMU '-cpu' argument string to override get_cpu_options
+# timeout => in seconds
+# paused => start VM in paused state (backup)
+# resume => resume from hibernation
+# migrate_opts:
+# nbd => volumes for NBD exports (vm_migrate_alloc_nbd_disks)
+# migratedfrom => source node
+# spice_ticket => used for spice migration, passed via tunnel/stdin
+# network => CIDR of migration network
+# type => secure/insecure - tunnel over encrypted connection or plain-text
+# nbd_proto_version => int, 0 for TCP, 1 for UNIX
+# replicated_volumes = which volids should be re-used with bitmaps for nbd migration
+sub vm_start_nolock {
+ my ($storecfg, $vmid, $conf, $params, $migrate_opts) = @_;
+
+ my $statefile = $params->{statefile};
+ my $resume = $params->{resume};
+
+ my $migratedfrom = $migrate_opts->{migratedfrom};
+ my $migration_type = $migrate_opts->{type};
- my $migration_ip;
- my $get_migration_ip = sub {
- my ($cidr, $nodename) = @_;
+ my $res = {};
- return $migration_ip if defined($migration_ip);
+ # clean up leftover reboot request files
+ eval { clear_reboot_request($vmid); };
+ warn $@ if $@;
- if (!defined($cidr)) {
- my $dc_conf = PVE::Cluster::cfs_read_file('datacenter.cfg');
- $cidr = $dc_conf->{migration}->{network};
- }
+ if (!$statefile && scalar(keys %{$conf->{pending}})) {
+ vmconfig_apply_pending($vmid, $conf, $storecfg);
+ $conf = PVE::QemuConfig->load_config($vmid); # update/reload
+ }
- if (defined($cidr)) {
- my $ips = PVE::Network::get_local_ip_from_cidr($cidr);
+ PVE::QemuServer::Cloudinit::generate_cloudinitconfig($conf, $vmid);
- die "could not get IP: no address configured on local " .
- "node for network '$cidr'\n" if scalar(@$ips) == 0;
+ my $defaults = load_defaults();
- die "could not get IP: multiple addresses configured on local " .
- "node for network '$cidr'\n" if scalar(@$ips) > 1;
+ # set environment variable useful inside network script
+ $ENV{PVE_MIGRATED_FROM} = $migratedfrom if $migratedfrom;
- $migration_ip = @$ips[0];
- }
+ PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'pre-start', 1);
- $migration_ip = PVE::Cluster::remote_node_ip($nodename, 1)
- if !defined($migration_ip);
+ my $forcemachine = $params->{forcemachine};
+ my $forcecpu = $params->{forcecpu};
+ if ($resume) {
+ # enforce machine and CPU type on suspended vm to ensure HW compatibility
+ $forcemachine = $conf->{runningmachine};
+ $forcecpu = $conf->{runningcpu};
+ print "Resuming suspended VM\n";
+ }
- return $migration_ip;
- };
+ my ($cmd, $vollist, $spice_port) =
+ config_to_command($storecfg, $vmid, $conf, $defaults, $forcemachine, $forcecpu);
- my $migrate_uri;
- if ($statefile) {
- if ($statefile eq 'tcp') {
- my $localip = "localhost";
- my $datacenterconf = PVE::Cluster::cfs_read_file('datacenter.cfg');
- my $nodename = nodename();
+ my $migration_ip;
+ my $get_migration_ip = sub {
+ my ($nodename) = @_;
- if (!defined($migration_type)) {
- if (defined($datacenterconf->{migration}->{type})) {
- $migration_type = $datacenterconf->{migration}->{type};
- } else {
- $migration_type = 'secure';
- }
- }
+ return $migration_ip if defined($migration_ip);
- if ($migration_type eq 'insecure') {
- $localip = $get_migration_ip->($migration_network, $nodename);
- $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
- }
+ my $cidr = $migrate_opts->{network};
- my $pfamily = PVE::Tools::get_host_address_family($nodename);
- my $migrate_port = PVE::Tools::next_migrate_port($pfamily);
- $migrate_uri = "tcp:${localip}:${migrate_port}";
- push @$cmd, '-incoming', $migrate_uri;
- push @$cmd, '-S';
+ if (!defined($cidr)) {
+ my $dc_conf = PVE::Cluster::cfs_read_file('datacenter.cfg');
+ $cidr = $dc_conf->{migration}->{network};
+ }
- } elsif ($statefile eq 'unix') {
- # should be default for secure migrations as a ssh TCP forward
- # tunnel is not deterministic reliable ready and fails regurarly
- # to set up in time, so use UNIX socket forwards
- my $socket_addr = "/run/qemu-server/$vmid.migrate";
- unlink $socket_addr;
+ if (defined($cidr)) {
+ my $ips = PVE::Network::get_local_ip_from_cidr($cidr);
- $migrate_uri = "unix:$socket_addr";
+ die "could not get IP: no address configured on local " .
+ "node for network '$cidr'\n" if scalar(@$ips) == 0;
- push @$cmd, '-incoming', $migrate_uri;
- push @$cmd, '-S';
+ die "could not get IP: multiple addresses configured on local " .
+ "node for network '$cidr'\n" if scalar(@$ips) > 1;
- } elsif (-e $statefile) {
- push @$cmd, '-loadstate', $statefile;
- } else {
- my $statepath = PVE::Storage::path($storecfg, $statefile);
- push @$vollist, $statefile;
- push @$cmd, '-loadstate', $statepath;
- }
- } elsif ($paused) {
- push @$cmd, '-S';
+ $migration_ip = @$ips[0];
}
- # host pci devices
- for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
- my $d = parse_hostpci($conf->{"hostpci$i"});
- next if !$d;
- my $pcidevices = $d->{pciid};
- foreach my $pcidevice (@$pcidevices) {
- my $pciid = $pcidevice->{id};
+ $migration_ip = PVE::Cluster::remote_node_ip($nodename, 1)
+ if !defined($migration_ip);
+
+ return $migration_ip;
+ };
- my $info = PVE::SysFSTools::pci_device_info("$pciid");
- die "IOMMU not present\n" if !PVE::SysFSTools::check_iommu_support();
- die "no pci device info for device '$pciid'\n" if !$info;
+ my $migrate_uri;
+ if ($statefile) {
+ if ($statefile eq 'tcp') {
+ my $localip = "localhost";
+ my $datacenterconf = PVE::Cluster::cfs_read_file('datacenter.cfg');
+ my $nodename = nodename();
- if ($d->{mdev}) {
- my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
- PVE::SysFSTools::pci_create_mdev_device($pciid, $uuid, $d->{mdev});
+ if (!defined($migration_type)) {
+ if (defined($datacenterconf->{migration}->{type})) {
+ $migration_type = $datacenterconf->{migration}->{type};
} else {
- die "can't unbind/bind pci group to vfio '$pciid'\n"
- if !PVE::SysFSTools::pci_dev_group_bind_to_vfio($pciid);
- die "can't reset pci device '$pciid'\n"
- if $info->{has_fl_reset} and !PVE::SysFSTools::pci_dev_reset($info);
+ $migration_type = 'secure';
}
- }
- }
+ }
- PVE::Storage::activate_volumes($storecfg, $vollist);
+ if ($migration_type eq 'insecure') {
+ $localip = $get_migration_ip->($nodename);
+ $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
+ }
- eval {
- run_command(['/bin/systemctl', 'stop', "$vmid.scope"],
- outfunc => sub {}, errfunc => sub {});
- };
- # Issues with the above 'stop' not being fully completed are extremely rare, a very low
- # timeout should be more than enough here...
- PVE::Systemd::wait_for_unit_removed("$vmid.scope", 5);
+ my $pfamily = PVE::Tools::get_host_address_family($nodename);
+ my $migrate_port = PVE::Tools::next_migrate_port($pfamily);
+ $migrate_uri = "tcp:${localip}:${migrate_port}";
+ push @$cmd, '-incoming', $migrate_uri;
+ push @$cmd, '-S';
- my $cpuunits = defined($conf->{cpuunits}) ? $conf->{cpuunits}
- : $defaults->{cpuunits};
+ } elsif ($statefile eq 'unix') {
+ # should be default for secure migrations as a ssh TCP forward
+ # tunnel is not deterministic reliable ready and fails regurarly
+ # to set up in time, so use UNIX socket forwards
+ my $socket_addr = "/run/qemu-server/$vmid.migrate";
+ unlink $socket_addr;
- my $start_timeout = ($conf->{hugepages} || $is_suspended) ? 300 : 30;
- my %run_params = (timeout => $statefile ? undef : $start_timeout, umask => 0077);
+ $migrate_uri = "unix:$socket_addr";
- my %properties = (
- Slice => 'qemu.slice',
- KillMode => 'none',
- CPUShares => $cpuunits
- );
+ push @$cmd, '-incoming', $migrate_uri;
+ push @$cmd, '-S';
- if (my $cpulimit = $conf->{cpulimit}) {
- $properties{CPUQuota} = int($cpulimit * 100);
+ } elsif (-e $statefile) {
+ push @$cmd, '-loadstate', $statefile;
+ } else {
+ my $statepath = PVE::Storage::path($storecfg, $statefile);
+ push @$vollist, $statefile;
+ push @$cmd, '-loadstate', $statepath;
}
- $properties{timeout} = 10 if $statefile; # setting up the scope shoul be quick
+ } elsif ($params->{paused}) {
+ push @$cmd, '-S';
+ }
- my $run_qemu = sub {
- PVE::Tools::run_fork sub {
- PVE::Systemd::enter_systemd_scope($vmid, "Proxmox VE VM $vmid", %properties);
- run_command($cmd, %run_params);
- };
- };
+ # host pci devices
+ for (my $i = 0; $i < $PVE::QemuServer::PCI::MAX_HOSTPCI_DEVICES; $i++) {
+ my $d = parse_hostpci($conf->{"hostpci$i"});
+ next if !$d;
+ my $pcidevices = $d->{pciid};
+ foreach my $pcidevice (@$pcidevices) {
+ my $pciid = $pcidevice->{id};
+
+ my $info = PVE::SysFSTools::pci_device_info("$pciid");
+ die "IOMMU not present\n" if !PVE::SysFSTools::check_iommu_support();
+ die "no pci device info for device '$pciid'\n" if !$info;
+
+ if ($d->{mdev}) {
+ my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
+ PVE::SysFSTools::pci_create_mdev_device($pciid, $uuid, $d->{mdev});
+ } else {
+ die "can't unbind/bind pci group to vfio '$pciid'\n"
+ if !PVE::SysFSTools::pci_dev_group_bind_to_vfio($pciid);
+ die "can't reset pci device '$pciid'\n"
+ if $info->{has_fl_reset} and !PVE::SysFSTools::pci_dev_reset($info);
+ }
+ }
+ }
- if ($conf->{hugepages}) {
+ PVE::Storage::activate_volumes($storecfg, $vollist);
- my $code = sub {
- my $hugepages_topology = PVE::QemuServer::Memory::hugepages_topology($conf);
- my $hugepages_host_topology = PVE::QemuServer::Memory::hugepages_host_topology();
+ eval {
+ run_command(['/bin/systemctl', 'stop', "$vmid.scope"],
+ outfunc => sub {}, errfunc => sub {});
+ };
+ # Issues with the above 'stop' not being fully completed are extremely rare, a very low
+ # timeout should be more than enough here...
+ PVE::Systemd::wait_for_unit_removed("$vmid.scope", 5);
+
+ my $cpuunits = defined($conf->{cpuunits}) ? $conf->{cpuunits}
+ : $defaults->{cpuunits};
+
+ my $start_timeout = $params->{timeout} // config_aware_timeout($conf, $resume);
+ my %run_params = (
+ timeout => $statefile ? undef : $start_timeout,
+ umask => 0077,
+ noerr => 1,
+ );
- PVE::QemuServer::Memory::hugepages_mount();
- PVE::QemuServer::Memory::hugepages_allocate($hugepages_topology, $hugepages_host_topology);
+ # when migrating, prefix QEMU output so other side can pick up any
+ # errors that might occur and show the user
+ if ($migratedfrom) {
+ $run_params{quiet} = 1;
+ $run_params{logfunc} = sub { print "QEMU: $_[0]\n" };
+ }
- eval { $run_qemu->() };
- if (my $err = $@) {
- PVE::QemuServer::Memory::hugepages_reset($hugepages_host_topology);
- die $err;
- }
+ my %properties = (
+ Slice => 'qemu.slice',
+ KillMode => 'none',
+ CPUShares => $cpuunits
+ );
- PVE::QemuServer::Memory::hugepages_pre_deallocate($hugepages_topology);
- };
- eval { PVE::QemuServer::Memory::hugepages_update_locked($code); };
+ if (my $cpulimit = $conf->{cpulimit}) {
+ $properties{CPUQuota} = int($cpulimit * 100);
+ }
+ $properties{timeout} = 10 if $statefile; # setting up the scope shoul be quick
+
+ my $run_qemu = sub {
+ PVE::Tools::run_fork sub {
+ PVE::Systemd::enter_systemd_scope($vmid, "Proxmox VE VM $vmid", %properties);
+
+ my $exitcode = run_command($cmd, %run_params);
+ die "QEMU exited with code $exitcode\n" if $exitcode;
+ };
+ };
+
+ if ($conf->{hugepages}) {
+
+ my $code = sub {
+ my $hugepages_topology = PVE::QemuServer::Memory::hugepages_topology($conf);
+ my $hugepages_host_topology = PVE::QemuServer::Memory::hugepages_host_topology();
+
+ PVE::QemuServer::Memory::hugepages_mount();
+ PVE::QemuServer::Memory::hugepages_allocate($hugepages_topology, $hugepages_host_topology);
- } else {
eval { $run_qemu->() };
- }
+ if (my $err = $@) {
+ PVE::QemuServer::Memory::hugepages_reset($hugepages_host_topology);
+ die $err;
+ }
- if (my $err = $@) {
- # deactivate volumes if start fails
- eval { PVE::Storage::deactivate_volumes($storecfg, $vollist); };
- die "start failed: $err";
- }
+ PVE::QemuServer::Memory::hugepages_pre_deallocate($hugepages_topology);
+ };
+ eval { PVE::QemuServer::Memory::hugepages_update_locked($code); };
- print "migration listens on $migrate_uri\n" if $migrate_uri;
+ } else {
+ eval { $run_qemu->() };
+ }
- if ($statefile && $statefile ne 'tcp' && $statefile ne 'unix') {
- eval { mon_cmd($vmid, "cont"); };
- warn $@ if $@;
- }
+ if (my $err = $@) {
+ # deactivate volumes if start fails
+ eval { PVE::Storage::deactivate_volumes($storecfg, $vollist); };
+ die "start failed: $err";
+ }
- #start nbd server for storage migration
- if ($targetstorage) {
+ print "migration listens on $migrate_uri\n" if $migrate_uri;
+ $res->{migrate_uri} = $migrate_uri;
+
+ if ($statefile && $statefile ne 'tcp' && $statefile ne 'unix') {
+ eval { mon_cmd($vmid, "cont"); };
+ warn $@ if $@;
+ }
+
+ #start nbd server for storage migration
+ if (my $nbd = $migrate_opts->{nbd}) {
+ my $nbd_protocol_version = $migrate_opts->{nbd_proto_version} // 0;
+
+ my $migrate_storage_uri;
+ # nbd_protocol_version > 0 for unix socket support
+ if ($nbd_protocol_version > 0 && $migration_type eq 'secure') {
+ my $socket_path = "/run/qemu-server/$vmid\_nbd.migrate";
+ mon_cmd($vmid, "nbd-server-start", addr => { type => 'unix', data => { path => $socket_path } } );
+ $migrate_storage_uri = "nbd:unix:$socket_path";
+ } else {
my $nodename = nodename();
- my $localip = $get_migration_ip->($migration_network, $nodename);
+ my $localip = $get_migration_ip->($nodename);
my $pfamily = PVE::Tools::get_host_address_family($nodename);
my $storage_migrate_port = PVE::Tools::next_migrate_port($pfamily);
mon_cmd($vmid, "nbd-server-start", addr => { type => 'inet', data => { host => "${localip}", port => "${storage_migrate_port}" } } );
-
$localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
+ $migrate_storage_uri = "nbd:${localip}:${storage_migrate_port}";
+ }
- foreach my $opt (sort keys %$local_volumes) {
- my $volid = $local_volumes->{$opt};
- mon_cmd($vmid, "nbd-server-add", device => "drive-$opt", writable => JSON::true );
- my $migrate_storage_uri = "nbd:${localip}:${storage_migrate_port}:exportname=drive-$opt";
- print "storage migration listens on $migrate_storage_uri volume:$volid\n";
- }
+ $res->{migrate_storage_uri} = $migrate_storage_uri;
+
+ foreach my $opt (sort keys %$nbd) {
+ my $drivestr = $nbd->{$opt}->{drivestr};
+ my $volid = $nbd->{$opt}->{volid};
+ mon_cmd($vmid, "nbd-server-add", device => "drive-$opt", writable => JSON::true );
+ my $nbd_uri = "$migrate_storage_uri:exportname=drive-$opt";
+ print "storage migration listens on $nbd_uri volume:$drivestr\n";
+ print "re-using replicated volume: $opt - $volid\n"
+ if $nbd->{$opt}->{replicated};
+
+ $res->{drives}->{$opt} = $nbd->{$opt};
+ $res->{drives}->{$opt}->{nbd_uri} = $nbd_uri;
}
+ }
- if ($migratedfrom) {
- eval {
- set_migration_caps($vmid);
- };
- warn $@ if $@;
+ if ($migratedfrom) {
+ eval {
+ set_migration_caps($vmid);
+ };
+ warn $@ if $@;
- if ($spice_port) {
- print "spice listens on port $spice_port\n";
- if ($spice_ticket) {
- mon_cmd($vmid, "set_password", protocol => 'spice', password => $spice_ticket);
- mon_cmd($vmid, "expire_password", protocol => 'spice', time => "+30");
- }
+ if ($spice_port) {
+ print "spice listens on port $spice_port\n";
+ $res->{spice_port} = $spice_port;
+ if ($migrate_opts->{spice_ticket}) {
+ mon_cmd($vmid, "set_password", protocol => 'spice', password => $migrate_opts->{spice_ticket});
+ mon_cmd($vmid, "expire_password", protocol => 'spice', time => "+30");
}
+ }
- } else {
- mon_cmd($vmid, "balloon", value => $conf->{balloon}*1024*1024)
- if !$statefile && $conf->{balloon};
+ } else {
+ mon_cmd($vmid, "balloon", value => $conf->{balloon}*1024*1024)
+ if !$statefile && $conf->{balloon};
- foreach my $opt (keys %$conf) {
- next if $opt !~ m/^net\d+$/;
- my $nicconf = parse_net($conf->{$opt});
- qemu_set_link_status($vmid, $opt, 0) if $nicconf->{link_down};
- }
+ foreach my $opt (keys %$conf) {
+ next if $opt !~ m/^net\d+$/;
+ my $nicconf = parse_net($conf->{$opt});
+ qemu_set_link_status($vmid, $opt, 0) if $nicconf->{link_down};
}
+ }
- mon_cmd($vmid, 'qom-set',
- path => "machine/peripheral/balloon0",
- property => "guest-stats-polling-interval",
- value => 2) if (!defined($conf->{balloon}) || $conf->{balloon});
+ mon_cmd($vmid, 'qom-set',
+ path => "machine/peripheral/balloon0",
+ property => "guest-stats-polling-interval",
+ value => 2) if (!defined($conf->{balloon}) || $conf->{balloon});
- if ($is_suspended) {
- print "Resumed VM, removing state\n";
- if (my $vmstate = $conf->{vmstate}) {
- PVE::Storage::deactivate_volumes($storecfg, [$vmstate]);
- PVE::Storage::vdisk_free($storecfg, $vmstate);
- }
- delete $conf->@{qw(lock vmstate runningmachine)};
- PVE::QemuConfig->write_config($vmid, $conf);
+ if ($resume) {
+ print "Resumed VM, removing state\n";
+ if (my $vmstate = $conf->{vmstate}) {
+ PVE::Storage::deactivate_volumes($storecfg, [$vmstate]);
+ PVE::Storage::vdisk_free($storecfg, $vmstate);
}
+ delete $conf->@{qw(lock vmstate runningmachine runningcpu)};
+ PVE::QemuConfig->write_config($vmid, $conf);
+ }
- PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'post-start');
- });
+ PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'post-start');
+
+ return $res;
}
sub vm_commandline {
my $conf = PVE::QemuConfig->load_config($vmid);
my $forcemachine;
+ my $forcecpu;
if ($snapname) {
my $snapshot = $conf->{snapshots}->{$snapname};
die "snapshot '$snapname' does not exist\n" if !defined($snapshot);
- # check for a 'runningmachine' in snapshot
- $forcemachine = $snapshot->{runningmachine} if $snapshot->{runningmachine};
+ # check for machine or CPU overrides in snapshot
+ $forcemachine = $snapshot->{runningmachine};
+ $forcecpu = $snapshot->{runningcpu};
$snapshot->{digest} = $conf->{digest}; # keep file digest for API
my $defaults = load_defaults();
- my $cmd = config_to_command($storecfg, $vmid, $conf, $defaults, $forcemachine);
+ my $cmd = config_to_command($storecfg, $vmid, $conf, $defaults,
+ $forcemachine, $forcecpu);
return PVE::Tools::cmd2string($cmd);
}
return;
}
} else {
- if ($force) {
+ if (!check_running($vmid, $nocheck)) {
+ warn "Unexpected: VM shutdown command failed, but VM not running anymore..\n";
+ return;
+ }
+ if ($force) {
warn "VM quit/powerdown failed - terminating now with SIGTERM\n";
kill 15, $pid;
} else {
});
}
+# note: if using the statestorage parameter, the caller has to check privileges
sub vm_suspend {
my ($vmid, $skiplock, $includestate, $statestorage) = @_;
$conf->{lock} = 'suspending';
my $date = strftime("%Y-%m-%d", localtime(time()));
$storecfg = PVE::Storage::config();
+ if (!$statestorage) {
+ $statestorage = find_vmstate_storage($conf, $storecfg);
+ # check permissions for the storage
+ my $rpcenv = PVE::RPCEnvironment::get();
+ if ($rpcenv->{type} ne 'cli') {
+ my $authuser = $rpcenv->get_user();
+ $rpcenv->check($authuser, "/storage/$statestorage", ['Datastore.AllocateSpace']);
+ }
+ }
+
+
$vmstate = PVE::QemuConfig->__snapshot_save_vmstate($vmid, $conf, "suspend-$date", $storecfg, $statestorage, 1);
$path = PVE::Storage::path($storecfg, $vmstate);
PVE::QemuConfig->write_config($vmid, $conf);
mon_cmd($vmid, "savevm-end");
PVE::Storage::deactivate_volumes($storecfg, [$vmstate]);
PVE::Storage::vdisk_free($storecfg, $vmstate);
- delete $conf->@{qw(vmstate runningmachine)};
+ delete $conf->@{qw(vmstate runningmachine runningcpu)};
PVE::QemuConfig->write_config($vmid, $conf);
};
warn $@ if $@;
}
}
-sub restore_archive {
+sub restore_file_archive {
my ($archive, $vmid, $user, $opts) = @_;
- my $format = $opts->{format};
- my $comp;
-
- if ($archive =~ m/\.tgz$/ || $archive =~ m/\.tar\.gz$/) {
- $format = 'tar' if !$format;
- $comp = 'gzip';
- } elsif ($archive =~ m/\.tar$/) {
- $format = 'tar' if !$format;
- } elsif ($archive =~ m/.tar.lzo$/) {
- $format = 'tar' if !$format;
- $comp = 'lzop';
- } elsif ($archive =~ m/\.vma$/) {
- $format = 'vma' if !$format;
- } elsif ($archive =~ m/\.vma\.gz$/) {
- $format = 'vma' if !$format;
- $comp = 'gzip';
- } elsif ($archive =~ m/\.vma\.lzo$/) {
- $format = 'vma' if !$format;
- $comp = 'lzop';
+ return restore_vma_archive($archive, $vmid, $user, $opts)
+ if $archive eq '-';
+
+ my $info = PVE::Storage::archive_info($archive);
+ my $format = $opts->{format} // $info->{format};
+ my $comp = $info->{compression};
+
+ # try to detect archive format
+ if ($format eq 'tar') {
+ return restore_tar_archive($archive, $vmid, $user, $opts);
} else {
- $format = 'vma' if !$format; # default
+ return restore_vma_archive($archive, $vmid, $user, $opts, $comp);
+ }
+}
+
+# hepler to remove disks that will not be used after restore
+my $restore_cleanup_oldconf = sub {
+ my ($storecfg, $vmid, $oldconf, $virtdev_hash) = @_;
+
+ PVE::QemuConfig->foreach_volume($oldconf, sub {
+ my ($ds, $drive) = @_;
+
+ return if drive_is_cdrom($drive, 1);
+
+ my $volid = $drive->{file};
+ return if !$volid || $volid =~ m|^/|;
+
+ my ($path, $owner) = PVE::Storage::path($storecfg, $volid);
+ return if !$path || !$owner || ($owner != $vmid);
+
+ # Note: only delete disk we want to restore
+ # other volumes will become unused
+ if ($virtdev_hash->{$ds}) {
+ eval { PVE::Storage::vdisk_free($storecfg, $volid); };
+ if (my $err = $@) {
+ warn $err;
+ }
+ }
+ });
+
+ # delete vmstate files, after the restore we have no snapshots anymore
+ foreach my $snapname (keys %{$oldconf->{snapshots}}) {
+ my $snap = $oldconf->{snapshots}->{$snapname};
+ if ($snap->{vmstate}) {
+ eval { PVE::Storage::vdisk_free($storecfg, $snap->{vmstate}); };
+ if (my $err = $@) {
+ warn $err;
+ }
+ }
+ }
+};
+
+# Helper to parse vzdump backup device hints
+#
+# $rpcenv: Environment, used to ckeck storage permissions
+# $user: User ID, to check storage permissions
+# $storecfg: Storage configuration
+# $fh: the file handle for reading the configuration
+# $devinfo: should contain device sizes for all backu-up'ed devices
+# $options: backup options (pool, default storage)
+#
+# Return: $virtdev_hash, updates $devinfo (add devname, virtdev, format, storeid)
+my $parse_backup_hints = sub {
+ my ($rpcenv, $user, $storecfg, $fh, $devinfo, $options) = @_;
+
+ my $virtdev_hash = {};
+
+ while (defined(my $line = <$fh>)) {
+ if ($line =~ m/^\#qmdump\#map:(\S+):(\S+):(\S*):(\S*):$/) {
+ my ($virtdev, $devname, $storeid, $format) = ($1, $2, $3, $4);
+ die "archive does not contain data for drive '$virtdev'\n"
+ if !$devinfo->{$devname};
+
+ if (defined($options->{storage})) {
+ $storeid = $options->{storage} || 'local';
+ } elsif (!$storeid) {
+ $storeid = 'local';
+ }
+ $format = 'raw' if !$format;
+ $devinfo->{$devname}->{devname} = $devname;
+ $devinfo->{$devname}->{virtdev} = $virtdev;
+ $devinfo->{$devname}->{format} = $format;
+ $devinfo->{$devname}->{storeid} = $storeid;
+
+ # check permission on storage
+ my $pool = $options->{pool}; # todo: do we need that?
+ if ($user ne 'root@pam') {
+ $rpcenv->check($user, "/storage/$storeid", ['Datastore.AllocateSpace']);
+ }
+
+ $virtdev_hash->{$virtdev} = $devinfo->{$devname};
+ } elsif ($line =~ m/^((?:ide|sata|scsi)\d+):\s*(.*)\s*$/) {
+ my $virtdev = $1;
+ my $drive = parse_drive($virtdev, $2);
+ if (drive_is_cloudinit($drive)) {
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($drive->{file});
+ $storeid = $options->{storage} if defined ($options->{storage});
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+ my $format = qemu_img_format($scfg, $volname); # has 'raw' fallback
+
+ $virtdev_hash->{$virtdev} = {
+ format => $format,
+ storeid => $storeid,
+ size => PVE::QemuServer::Cloudinit::CLOUDINIT_DISK_SIZE,
+ is_cloudinit => 1,
+ };
+ }
+ }
}
- # try to detect archive format
- if ($format eq 'tar') {
- return restore_tar_archive($archive, $vmid, $user, $opts);
- } else {
- return restore_vma_archive($archive, $vmid, $user, $opts, $comp);
+ return $virtdev_hash;
+};
+
+# Helper to allocate and activate all volumes required for a restore
+#
+# $storecfg: Storage configuration
+# $virtdev_hash: as returned by parse_backup_hints()
+#
+# Returns: { $virtdev => $volid }
+my $restore_allocate_devices = sub {
+ my ($storecfg, $virtdev_hash, $vmid) = @_;
+
+ my $map = {};
+ foreach my $virtdev (sort keys %$virtdev_hash) {
+ my $d = $virtdev_hash->{$virtdev};
+ my $alloc_size = int(($d->{size} + 1024 - 1)/1024);
+ my $storeid = $d->{storeid};
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+
+ # test if requested format is supported
+ my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($storecfg, $storeid);
+ my $supported = grep { $_ eq $d->{format} } @$validFormats;
+ $d->{format} = $defFormat if !$supported;
+
+ my $name;
+ if ($d->{is_cloudinit}) {
+ $name = "vm-$vmid-cloudinit";
+ $name .= ".$d->{format}" if $d->{format} ne 'raw';
+ }
+
+ my $volid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $d->{format}, $name, $alloc_size);
+
+ print STDERR "new volume ID is '$volid'\n";
+ $d->{volid} = $volid;
+
+ PVE::Storage::activate_volumes($storecfg, [$volid]);
+
+ $map->{$virtdev} = $volid;
}
-}
-sub restore_update_config_line {
+ return $map;
+};
+
+my $restore_update_config_line = sub {
my ($outfd, $cookie, $vmid, $map, $line, $unique) = @_;
return if $line =~ m/^\#qmdump\#/;
} else {
print $outfd $line;
}
-}
+};
+
+my $restore_deactivate_volumes = sub {
+ my ($storecfg, $devinfo) = @_;
+
+ my $vollist = [];
+ foreach my $devname (keys %$devinfo) {
+ my $volid = $devinfo->{$devname}->{volid};
+ push @$vollist, $volid if $volid;
+ }
+
+ PVE::Storage::deactivate_volumes($storecfg, $vollist);
+};
+
+my $restore_destroy_volumes = sub {
+ my ($storecfg, $devinfo) = @_;
+
+ foreach my $devname (keys %$devinfo) {
+ my $volid = $devinfo->{$devname}->{volid};
+ next if !$volid;
+ eval {
+ if ($volid =~ m|^/|) {
+ unlink $volid || die 'unlink failed\n';
+ } else {
+ PVE::Storage::vdisk_free($storecfg, $volid);
+ }
+ print STDERR "temporary volume '$volid' sucessfuly removed\n";
+ };
+ print STDERR "unable to cleanup '$volid' - $@" if $@;
+ }
+};
sub scan_volids {
my ($cfg, $vmid) = @_;
return $volid_hash;
}
-sub is_volume_in_use {
- my ($storecfg, $conf, $skip_drive, $volid) = @_;
-
- my $path = PVE::Storage::path($storecfg, $volid);
-
- my $scan_config = sub {
- my ($cref, $snapname) = @_;
-
- foreach my $key (keys %$cref) {
- my $value = $cref->{$key};
- if (is_valid_drivename($key)) {
- next if $skip_drive && $key eq $skip_drive;
- my $drive = parse_drive($key, $value);
- next if !$drive || !$drive->{file} || drive_is_cdrom($drive);
- return 1 if $volid eq $drive->{file};
- if ($drive->{file} =~ m!^/!) {
- return 1 if $drive->{file} eq $path;
- } else {
- my ($storeid, $volname) = PVE::Storage::parse_volume_id($drive->{file}, 1);
- next if !$storeid;
- my $scfg = PVE::Storage::storage_config($storecfg, $storeid, 1);
- next if !$scfg;
- return 1 if $path eq PVE::Storage::path($storecfg, $drive->{file}, $snapname);
- }
- }
- }
-
- return 0;
- };
-
- return 1 if &$scan_config($conf);
-
- undef $skip_drive;
-
- foreach my $snapname (keys %{$conf->{snapshots}}) {
- return 1 if &$scan_config($conf->{snapshots}->{$snapname}, $snapname);
- }
-
- return 0;
-}
-
-sub update_disksize {
+sub update_disk_config {
my ($vmid, $conf, $volid_hash) = @_;
my $changes;
- my $prefix = "VM $vmid:";
+ my $prefix = "VM $vmid";
# used and unused disks
my $referenced = {};
my $referencedpath = {};
# update size info
- foreach my $opt (keys %$conf) {
- if (is_valid_drivename($opt)) {
- my $drive = parse_drive($opt, $conf->{$opt});
- my $volid = $drive->{file};
- next if !$volid;
+ PVE::QemuConfig->foreach_volume($conf, sub {
+ my ($opt, $drive) = @_;
- $referenced->{$volid} = 1;
- if ($volid_hash->{$volid} &&
- (my $path = $volid_hash->{$volid}->{path})) {
- $referencedpath->{$path} = 1;
- }
+ my $volid = $drive->{file};
+ return if !$volid;
- next if drive_is_cdrom($drive);
- next if !$volid_hash->{$volid};
+ # mark volid as "in-use" for next step
+ $referenced->{$volid} = 1;
+ if ($volid_hash->{$volid} &&
+ (my $path = $volid_hash->{$volid}->{path})) {
+ $referencedpath->{$path} = 1;
+ }
- $drive->{size} = $volid_hash->{$volid}->{size};
- my $new = print_drive($drive);
- if ($new ne $conf->{$opt}) {
- $changes = 1;
- $conf->{$opt} = $new;
- print "$prefix update disk '$opt' information.\n";
- }
+ return if drive_is_cdrom($drive);
+ return if !$volid_hash->{$volid};
+
+ my ($updated, $msg) = PVE::QemuServer::Drive::update_disksize($drive, $volid_hash->{$volid}->{size});
+ if (defined($updated)) {
+ $changes = 1;
+ $conf->{$opt} = print_drive($updated);
+ print "$prefix ($opt): $msg\n";
}
- }
+ });
# remove 'unusedX' entry if volume is used
- foreach my $opt (keys %$conf) {
- next if $opt !~ m/^unused\d+$/;
- my $volid = $conf->{$opt};
+ PVE::QemuConfig->foreach_unused_volume($conf, sub {
+ my ($opt, $drive) = @_;
+
+ my $volid = $drive->{file};
+ return if !$volid;
+
my $path = $volid_hash->{$volid}->{path} if $volid_hash->{$volid};
if ($referenced->{$volid} || ($path && $referencedpath->{$path})) {
- print "$prefix remove entry '$opt', its volume '$volid' is in use.\n";
+ print "$prefix remove entry '$opt', its volume '$volid' is in use\n";
$changes = 1;
delete $conf->{$opt};
}
$referenced->{$volid} = 1;
$referencedpath->{$path} = 1 if $path;
- }
+ });
foreach my $volid (sort keys %$volid_hash) {
next if $volid =~ m/vm-$vmid-state-/;
next if $referencedpath->{$path};
$changes = 1;
my $key = PVE::QemuConfig->add_unused_volume($conf, $volid);
- print "$prefix add unreferenced volume '$volid' as '$key' to config.\n";
+ print "$prefix add unreferenced volume '$volid' as '$key' to config\n";
$referencedpath->{$path} = 1; # avoid to add more than once (aliases)
}
$vm_volids->{$volid} = $info if $info->{vmid} && $info->{vmid} == $vmid;
}
- my $changes = update_disksize($vmid, $conf, $vm_volids);
+ my $changes = update_disk_config($vmid, $conf, $vm_volids);
PVE::QemuConfig->write_config($vmid, $conf) if $changes && !$dryrun;
};
}
}
+sub restore_proxmox_backup_archive {
+ my ($archive, $vmid, $user, $options) = @_;
+
+ my $storecfg = PVE::Storage::config();
+
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($archive);
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+
+ my $server = $scfg->{server};
+ my $datastore = $scfg->{datastore};
+ my $username = $scfg->{username} // 'root@pam';
+ my $fingerprint = $scfg->{fingerprint};
+
+ my $repo = "$username\@$server:$datastore";
+
+ # This is only used for `pbs-restore`!
+ my $password = PVE::Storage::PBSPlugin::pbs_get_password($scfg, $storeid);
+ local $ENV{PBS_PASSWORD} = $password;
+ local $ENV{PBS_FINGERPRINT} = $fingerprint if defined($fingerprint);
+
+ my ($vtype, $pbs_backup_name, undef, undef, undef, undef, $format) =
+ PVE::Storage::parse_volname($storecfg, $archive);
+
+ die "got unexpected vtype '$vtype'\n" if $vtype ne 'backup';
+
+ die "got unexpected backup format '$format'\n" if $format ne 'pbs-vm';
+
+ my $tmpdir = "/var/tmp/vzdumptmp$$";
+ rmtree $tmpdir;
+ mkpath $tmpdir;
+
+ my $conffile = PVE::QemuConfig->config_file($vmid);
+ my $tmpfn = "$conffile.$$.tmp";
+ # disable interrupts (always do cleanups)
+ local $SIG{INT} =
+ local $SIG{TERM} =
+ local $SIG{QUIT} =
+ local $SIG{HUP} = sub { print STDERR "got interrupt - ignored\n"; };
+
+ # Note: $oldconf is undef if VM does not exists
+ my $cfs_path = PVE::QemuConfig->cfs_config_path($vmid);
+ my $oldconf = PVE::Cluster::cfs_read_file($cfs_path);
+
+ my $rpcenv = PVE::RPCEnvironment::get();
+ my $devinfo = {};
+
+ eval {
+ # enable interrupts
+ local $SIG{INT} =
+ local $SIG{TERM} =
+ local $SIG{QUIT} =
+ local $SIG{HUP} =
+ local $SIG{PIPE} = sub { die "interrupted by signal\n"; };
+
+ my $cfgfn = "$tmpdir/qemu-server.conf";
+ my $firewall_config_fn = "$tmpdir/fw.conf";
+ my $index_fn = "$tmpdir/index.json";
+
+ my $cmd = "restore";
+
+ my $param = [$pbs_backup_name, "index.json", $index_fn];
+ PVE::Storage::PBSPlugin::run_raw_client_cmd($scfg, $storeid, $cmd, $param);
+ my $index = PVE::Tools::file_get_contents($index_fn);
+ $index = decode_json($index);
+
+ # print Dumper($index);
+ foreach my $info (@{$index->{files}}) {
+ if ($info->{filename} =~ m/^(drive-\S+).img.fidx$/) {
+ my $devname = $1;
+ if ($info->{size} =~ m/^(\d+)$/) { # untaint size
+ $devinfo->{$devname}->{size} = $1;
+ } else {
+ die "unable to parse file size in 'index.json' - got '$info->{size}'\n";
+ }
+ }
+ }
+
+ my $is_qemu_server_backup = scalar(grep { $_->{filename} eq 'qemu-server.conf.blob' } @{$index->{files}});
+ if (!$is_qemu_server_backup) {
+ die "backup does not look like a qemu-server backup (missing 'qemu-server.conf' file)\n";
+ }
+ my $has_firewall_config = scalar(grep { $_->{filename} eq 'fw.conf.blob' } @{$index->{files}});
+
+ $param = [$pbs_backup_name, "qemu-server.conf", $cfgfn];
+ PVE::Storage::PBSPlugin::run_raw_client_cmd($scfg, $storeid, $cmd, $param);
+
+ if ($has_firewall_config) {
+ $param = [$pbs_backup_name, "fw.conf", $firewall_config_fn];
+ PVE::Storage::PBSPlugin::run_raw_client_cmd($scfg, $storeid, $cmd, $param);
+
+ my $pve_firewall_dir = '/etc/pve/firewall';
+ mkdir $pve_firewall_dir; # make sure the dir exists
+ PVE::Tools::file_copy($firewall_config_fn, "${pve_firewall_dir}/$vmid.fw");
+ }
+
+ my $fh = IO::File->new($cfgfn, "r") ||
+ "unable to read qemu-server.conf - $!\n";
+
+ my $virtdev_hash = $parse_backup_hints->($rpcenv, $user, $storecfg, $fh, $devinfo, $options);
+
+ # fixme: rate limit?
+
+ # create empty/temp config
+ PVE::Tools::file_set_contents($conffile, "memory: 128\nlock: create");
+
+ $restore_cleanup_oldconf->($storecfg, $vmid, $oldconf, $virtdev_hash) if $oldconf;
+
+ # allocate volumes
+ my $map = $restore_allocate_devices->($storecfg, $virtdev_hash, $vmid);
+
+ foreach my $virtdev (sort keys %$virtdev_hash) {
+ my $d = $virtdev_hash->{$virtdev};
+ next if $d->{is_cloudinit}; # no need to restore cloudinit
+
+ my $volid = $d->{volid};
+
+ my $path = PVE::Storage::path($storecfg, $volid);
+
+ # This is the ONLY user of the PBS_ env vars set on top of this function!
+ my $pbs_restore_cmd = [
+ '/usr/bin/pbs-restore',
+ '--repository', $repo,
+ $pbs_backup_name,
+ "$d->{devname}.img.fidx",
+ $path,
+ '--verbose',
+ ];
+
+ push @$pbs_restore_cmd, '--format', $d->{format} if $d->{format};
+
+ if (PVE::Storage::volume_has_feature($storecfg, 'sparseinit', $volid)) {
+ push @$pbs_restore_cmd, '--skip-zero';
+ }
+
+ my $dbg_cmdstring = PVE::Tools::cmd2string($pbs_restore_cmd);
+ print "restore proxmox backup image: $dbg_cmdstring\n";
+ run_command($pbs_restore_cmd);
+ }
+
+ $fh->seek(0, 0) || die "seek failed - $!\n";
+
+ my $outfd = new IO::File ($tmpfn, "w") ||
+ die "unable to write config for VM $vmid\n";
+
+ my $cookie = { netcount => 0 };
+ while (defined(my $line = <$fh>)) {
+ $restore_update_config_line->($outfd, $cookie, $vmid, $map, $line, $options->{unique});
+ }
+
+ $fh->close();
+ $outfd->close();
+ };
+ my $err = $@;
+
+ $restore_deactivate_volumes->($storecfg, $devinfo);
+
+ rmtree $tmpdir;
+
+ if ($err) {
+ unlink $tmpfn;
+ $restore_destroy_volumes->($storecfg, $devinfo);
+ die $err;
+ }
+
+ rename($tmpfn, $conffile) ||
+ die "unable to commit configuration file '$conffile'\n";
+
+ PVE::Cluster::cfs_update(); # make sure we read new file
+
+ eval { rescan($vmid, 1); };
+ warn $@ if $@;
+}
+
sub restore_vma_archive {
my ($archive, $vmid, $user, $opts, $comp) = @_;
}
if ($comp) {
- my $cmd;
- if ($comp eq 'gzip') {
- $cmd = ['zcat', $readfrom];
- } elsif ($comp eq 'lzop') {
- $cmd = ['lzop', '-d', '-c', $readfrom];
- } else {
- die "unknown compression method '$comp'\n";
- }
+ my $info = PVE::Storage::decompressor_info('vma', $comp);
+ my $cmd = $info->{decompressor};
+ push @$cmd, $readfrom;
$add_pipe->($cmd);
}
my $conffile = PVE::QemuConfig->config_file($vmid);
my $tmpfn = "$conffile.$$.tmp";
- # Note: $oldconf is undef if VM does not exists
+ # Note: $oldconf is undef if VM does not exist
my $cfs_path = PVE::QemuConfig->cfs_config_path($vmid);
my $oldconf = PVE::Cluster::cfs_read_file($cfs_path);
my %storage_limits;
my $print_devmap = sub {
- my $virtdev_hash = {};
-
my $cfgfn = "$tmpdir/qemu-server.conf";
# we can read the config - that is already extracted
PVE::Tools::file_copy($fwcfgfn, "${pve_firewall_dir}/$vmid.fw");
}
- while (defined(my $line = <$fh>)) {
- if ($line =~ m/^\#qmdump\#map:(\S+):(\S+):(\S*):(\S*):$/) {
- my ($virtdev, $devname, $storeid, $format) = ($1, $2, $3, $4);
- die "archive does not contain data for drive '$virtdev'\n"
- if !$devinfo->{$devname};
- if (defined($opts->{storage})) {
- $storeid = $opts->{storage} || 'local';
- } elsif (!$storeid) {
- $storeid = 'local';
- }
- $format = 'raw' if !$format;
- $devinfo->{$devname}->{devname} = $devname;
- $devinfo->{$devname}->{virtdev} = $virtdev;
- $devinfo->{$devname}->{format} = $format;
- $devinfo->{$devname}->{storeid} = $storeid;
-
- # check permission on storage
- my $pool = $opts->{pool}; # todo: do we need that?
- if ($user ne 'root@pam') {
- $rpcenv->check($user, "/storage/$storeid", ['Datastore.AllocateSpace']);
- }
-
- $storage_limits{$storeid} = $bwlimit;
-
- $virtdev_hash->{$virtdev} = $devinfo->{$devname};
- } elsif ($line =~ m/^((?:ide|sata|scsi)\d+):\s*(.*)\s*$/) {
- my $virtdev = $1;
- my $drive = parse_drive($virtdev, $2);
- if (drive_is_cloudinit($drive)) {
- my ($storeid, $volname) = PVE::Storage::parse_volume_id($drive->{file});
- my $scfg = PVE::Storage::storage_config($cfg, $storeid);
- my $format = qemu_img_format($scfg, $volname); # has 'raw' fallback
-
- my $d = {
- format => $format,
- storeid => $opts->{storage} // $storeid,
- size => PVE::QemuServer::Cloudinit::CLOUDINIT_DISK_SIZE,
- file => $drive->{file}, # to make drive_is_cloudinit check possible
- name => "vm-$vmid-cloudinit",
- is_cloudinit => 1,
- };
- $virtdev_hash->{$virtdev} = $d;
- }
- }
- }
+ my $virtdev_hash = $parse_backup_hints->($rpcenv, $user, $cfg, $fh, $devinfo, $opts);
foreach my $key (keys %storage_limits) {
my $limit = PVE::Storage::get_bandwidth_limit('restore', [$key], $bwlimit);
# create empty/temp config
if ($oldconf) {
PVE::Tools::file_set_contents($conffile, "memory: 128\n");
- foreach_drive($oldconf, sub {
- my ($ds, $drive) = @_;
-
- return if drive_is_cdrom($drive, 1);
-
- my $volid = $drive->{file};
- return if !$volid || $volid =~ m|^/|;
-
- my ($path, $owner) = PVE::Storage::path($cfg, $volid);
- return if !$path || !$owner || ($owner != $vmid);
-
- # Note: only delete disk we want to restore
- # other volumes will become unused
- if ($virtdev_hash->{$ds}) {
- eval { PVE::Storage::vdisk_free($cfg, $volid); };
- if (my $err = $@) {
- warn $err;
- }
- }
- });
-
- # delete vmstate files, after the restore we have no snapshots anymore
- foreach my $snapname (keys %{$oldconf->{snapshots}}) {
- my $snap = $oldconf->{snapshots}->{$snapname};
- if ($snap->{vmstate}) {
- eval { PVE::Storage::vdisk_free($cfg, $snap->{vmstate}); };
- if (my $err = $@) {
- warn $err;
- }
- }
- }
+ $restore_cleanup_oldconf->($cfg, $vmid, $oldconf, $virtdev_hash);
}
- my $map = {};
+ # allocate volumes
+ my $map = $restore_allocate_devices->($cfg, $virtdev_hash, $vmid);
+
+ # print restore information to $fifofh
foreach my $virtdev (sort keys %$virtdev_hash) {
my $d = $virtdev_hash->{$virtdev};
- my $alloc_size = int(($d->{size} + 1024 - 1)/1024);
+ next if $d->{is_cloudinit}; # no need to restore cloudinit
+
my $storeid = $d->{storeid};
- my $scfg = PVE::Storage::storage_config($cfg, $storeid);
+ my $volid = $d->{volid};
my $map_opts = '';
if (my $limit = $storage_limits{$storeid}) {
$map_opts .= "throttling.bps=$limit:throttling.group=$storeid:";
}
- # test if requested format is supported
- my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($cfg, $storeid);
- my $supported = grep { $_ eq $d->{format} } @$validFormats;
- $d->{format} = $defFormat if !$supported;
-
- my $name;
- if ($d->{is_cloudinit}) {
- $name = $d->{name};
- $name .= ".$d->{format}" if $d->{format} ne 'raw';
- }
-
- my $volid = PVE::Storage::vdisk_alloc($cfg, $storeid, $vmid, $d->{format}, $name, $alloc_size);
- print STDERR "new volume ID is '$volid'\n";
- $d->{volid} = $volid;
-
- PVE::Storage::activate_volumes($cfg, [$volid]);
-
my $write_zeros = 1;
if (PVE::Storage::volume_has_feature($cfg, 'sparseinit', $volid)) {
$write_zeros = 0;
}
- if (!$d->{is_cloudinit}) {
- my $path = PVE::Storage::path($cfg, $volid);
+ my $path = PVE::Storage::path($cfg, $volid);
- print $fifofh "${map_opts}format=$d->{format}:${write_zeros}:$d->{devname}=$path\n";
+ print $fifofh "${map_opts}format=$d->{format}:${write_zeros}:$d->{devname}=$path\n";
- print "map '$d->{devname}' to '$path' (write zeros = ${write_zeros})\n";
- }
- $map->{$virtdev} = $volid;
+ print "map '$d->{devname}' to '$path' (write zeros = ${write_zeros})\n";
}
$fh->seek(0, 0) || die "seek failed - $!\n";
my $cookie = { netcount => 0 };
while (defined(my $line = <$fh>)) {
- restore_update_config_line($outfd, $cookie, $vmid, $map, $line, $opts->{unique});
+ $restore_update_config_line->($outfd, $cookie, $vmid, $map, $line, $opts->{unique});
}
$fh->close();
alarm($oldtimeout) if $oldtimeout;
- my $vollist = [];
- foreach my $devname (keys %$devinfo) {
- my $volid = $devinfo->{$devname}->{volid};
- push @$vollist, $volid if $volid;
- }
-
- PVE::Storage::deactivate_volumes($cfg, $vollist);
+ $restore_deactivate_volumes->($cfg, $devinfo);
unlink $mapfifo;
+ rmtree $tmpdir;
if ($err) {
- rmtree $tmpdir;
unlink $tmpfn;
-
- foreach my $devname (keys %$devinfo) {
- my $volid = $devinfo->{$devname}->{volid};
- next if !$volid;
- eval {
- if ($volid =~ m|^/|) {
- unlink $volid || die 'unlink failed\n';
- } else {
- PVE::Storage::vdisk_free($cfg, $volid);
- }
- print STDERR "temporary volume '$volid' sucessfuly removed\n";
- };
- print STDERR "unable to cleanup '$volid' - $@" if $@;
- }
+ $restore_destroy_volumes->($cfg, $devinfo);
die $err;
}
- rmtree $tmpdir;
-
rename($tmpfn, $conffile) ||
die "unable to commit configuration file '$conffile'\n";
my $cookie = { netcount => 0 };
while (defined (my $line = <$srcfd>)) {
- restore_update_config_line($outfd, $cookie, $vmid, $map, $line, $opts->{unique});
+ $restore_update_config_line->($outfd, $cookie, $vmid, $map, $line, $opts->{unique});
}
$srcfd->close();
my $sidhash = {};
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
return if drive_is_cdrom($drive);
my $storecfg = PVE::Storage::config();
- foreach_drive($conf, sub {
+ PVE::QemuConfig->foreach_volume($conf, sub {
my ($ds, $drive) = @_;
return if drive_is_cdrom($drive);
$cachemode = 'none' if $src_scfg->{type} eq 'zfspool';
} elsif (-f $src_volid) {
$src_path = $src_volid;
- if ($src_path =~ m/\.($QEMU_FORMAT_RE)$/) {
+ if ($src_path =~ m/\.($PVE::QemuServer::Drive::QEMU_FORMAT_RE)$/) {
$src_format = $1;
}
}
sub qemu_img_format {
my ($scfg, $volname) = @_;
- if ($scfg->{path} && $volname =~ m/\.($QEMU_FORMAT_RE)$/) {
+ if ($scfg->{path} && $volname =~ m/\.($PVE::QemuServer::Drive::QEMU_FORMAT_RE)$/) {
return $1;
} else {
return "raw";
}
sub qemu_drive_mirror {
- my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized, $jobs, $skipcomplete, $qga, $bwlimit) = @_;
+ my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized, $jobs, $completion, $qga, $bwlimit, $src_bitmap) = @_;
$jobs = {} if !$jobs;
my $opts = { timeout => 10, device => "drive-$drive", mode => "existing", sync => "full", target => $qemu_target };
$opts->{format} = $format if $format;
+ if (defined($src_bitmap)) {
+ $opts->{sync} = 'incremental';
+ $opts->{bitmap} = $src_bitmap;
+ print "drive mirror re-using dirty bitmap '$src_bitmap'\n";
+ }
+
if (defined($bwlimit)) {
$opts->{speed} = $bwlimit * 1024;
print "drive mirror is starting for drive-$drive with bandwidth limit: ${bwlimit} KB/s\n";
die "mirroring error: $err\n";
}
- qemu_drive_mirror_monitor ($vmid, $vmiddst, $jobs, $skipcomplete, $qga);
+ qemu_drive_mirror_monitor ($vmid, $vmiddst, $jobs, $completion, $qga);
}
+# $completion can be either
+# 'complete': wait until all jobs are ready, block-job-complete them (default)
+# 'cancel': wait until all jobs are ready, block-job-cancel them
+# 'skip': wait until all jobs are ready, return with block jobs in ready state
sub qemu_drive_mirror_monitor {
- my ($vmid, $vmiddst, $jobs, $skipcomplete, $qga) = @_;
+ my ($vmid, $vmiddst, $jobs, $completion, $qga) = @_;
+
+ $completion //= 'complete';
eval {
my $err_complete = 0;
if ($readycounter == scalar(keys %$jobs)) {
print "all mirroring jobs are ready \n";
- last if $skipcomplete; #do the complete later
+ last if $completion eq 'skip'; #do the complete later
if ($vmiddst && $vmiddst != $vmid) {
my $agent_running = $qga && qga_check_running($vmid);
# try to switch the disk if source and destination are on the same guest
print "$job: Completing block job...\n";
- eval { mon_cmd($vmid, "block-job-complete", device => $job) };
+ my $op;
+ if ($completion eq 'complete') {
+ $op = 'block-job-complete';
+ } elsif ($completion eq 'cancel') {
+ $op = 'block-job-cancel';
+ } else {
+ die "invalid completion value: $completion\n";
+ }
+ eval { mon_cmd($vmid, $op, device => $job) };
if ($@ =~ m/cannot be completed/) {
print "$job: Block job cannot be completed, try again.\n";
$err_complete++;
sub clone_disk {
my ($storecfg, $vmid, $running, $drivename, $drive, $snapname,
- $newvmid, $storage, $format, $full, $newvollist, $jobs, $skipcomplete, $qga, $bwlimit) = @_;
+ $newvmid, $storage, $format, $full, $newvollist, $jobs, $completion, $qga, $bwlimit, $conf) = @_;
my $newvolid;
$name .= ".$dst_format" if $dst_format ne 'raw';
$snapname = undef;
$size = PVE::QemuServer::Cloudinit::CLOUDINIT_DISK_SIZE;
+ } elsif ($drivename eq 'efidisk0') {
+ $size = get_efivars_size($conf);
}
$newvolid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $newvmid, $dst_format, $name, ($size/1024));
push @$newvollist, $newvolid;
my $sparseinit = PVE::Storage::volume_has_feature($storecfg, 'sparseinit', $newvolid);
if (!$running || $snapname) {
# TODO: handle bwlimits
- qemu_img_convert($drive->{file}, $newvolid, $size, $snapname, $sparseinit);
+ if ($drivename eq 'efidisk0') {
+ # the relevant data on the efidisk may be smaller than the source
+ # e.g. on RBD/ZFS, so we use dd to copy only the amount
+ # that is given by the OVMF_VARS.fd
+ my $src_path = PVE::Storage::path($storecfg, $drive->{file});
+ my $dst_path = PVE::Storage::path($storecfg, $newvolid);
+ run_command(['qemu-img', 'dd', '-n', '-O', $dst_format, "bs=1", "count=$size", "if=$src_path", "of=$dst_path"]);
+ } else {
+ qemu_img_convert($drive->{file}, $newvolid, $size, $snapname, $sparseinit);
+ }
} else {
my $kvmver = get_running_qemu_version ($vmid);
if $drive->{iothread};
}
- qemu_drive_mirror($vmid, $drivename, $newvolid, $newvmid, $sparseinit, $jobs, $skipcomplete, $qga, $bwlimit);
+ qemu_drive_mirror($vmid, $drivename, $newvolid, $newvmid, $sparseinit, $jobs, $completion, $qga, $bwlimit);
}
}
return ($use_old_bios_files, $machine_type);
}
+sub get_efivars_size {
+ my ($conf) = @_;
+ my $arch = get_vm_arch($conf);
+ my (undef, $ovmf_vars) = get_ovmf_files($arch);
+ die "uefi vars image '$ovmf_vars' not found\n" if ! -f $ovmf_vars;
+ return -s $ovmf_vars;
+}
+
+sub update_efidisk_size {
+ my ($conf) = @_;
+
+ return if !defined($conf->{efidisk0});
+
+ my $disk = PVE::QemuServer::parse_drive('efidisk0', $conf->{efidisk0});
+ $disk->{size} = get_efivars_size($conf);
+ $conf->{efidisk0} = print_drive($disk);
+
+ return;
+}
+
sub create_efidisk($$$$$) {
my ($storecfg, $storeid, $vmid, $fmt, $arch) = @_;
return ($maxdev, $controller, $controller_prefix);
}
-sub add_hyperv_enlightenments {
- my ($cpuFlags, $winversion, $machine_version, $bios, $gpu_passthrough, $hv_vendor_id) = @_;
-
- return if $winversion < 6;
- return if $bios && $bios eq 'ovmf' && $winversion < 8;
-
- if ($gpu_passthrough || defined($hv_vendor_id)) {
- $hv_vendor_id //= 'proxmox';
- push @$cpuFlags , "hv_vendor_id=$hv_vendor_id";
- }
-
- if (min_version($machine_version, 2, 3)) {
- push @$cpuFlags , 'hv_spinlocks=0x1fff';
- push @$cpuFlags , 'hv_vapic';
- push @$cpuFlags , 'hv_time';
- } else {
- push @$cpuFlags , 'hv_spinlocks=0xffff';
- }
-
- if (min_version($machine_version, 2, 6)) {
- push @$cpuFlags , 'hv_reset';
- push @$cpuFlags , 'hv_vpindex';
- push @$cpuFlags , 'hv_runtime';
- }
-
- if ($winversion >= 7) {
- push @$cpuFlags , 'hv_relaxed';
-
- if (min_version($machine_version, 2, 12)) {
- push @$cpuFlags , 'hv_synic';
- push @$cpuFlags , 'hv_stimer';
- }
-
- if (min_version($machine_version, 3, 1)) {
- push @$cpuFlags , 'hv_ipi';
- }
- }
-}
-
sub windows_version {
my ($ostype) = @_;
return $format;
}
-sub resolve_first_disk {
- my $conf = shift;
- my @disks = PVE::QemuServer::valid_drive_names();
- my $firstdisk;
- foreach my $ds (reverse @disks) {
- next if !$conf->{$ds};
- my $disk = PVE::QemuServer::parse_drive($ds, $conf->{$ds});
- next if PVE::QemuServer::drive_is_cdrom($disk);
- $firstdisk = $ds;
- }
- return $firstdisk;
-}
-
# NOTE: if this logic changes, please update docs & possibly gui logic
sub find_vmstate_storage {
my ($conf, $storecfg) = @_;
my $res = [];
foreach my $id (keys %$data) {
foreach my $item (@{$data->{$id}}) {
- next if $item->{format} !~ m/^vma\.(gz|lzo)$/;
+ next if $item->{format} !~ m/^vma\.(${\PVE::Storage::Plugin::COMPRESSOR_RE})$/;
push @$res, $item->{volid} if defined($item->{volid});
}
}
projects / qemu-server.git / blobdiff