]> git.proxmox.com Git - qemu.git/blob - hw/scsi-disk.c
moxie: configure with default-configs file
[qemu.git] / hw / scsi-disk.c
1 /*
2 * SCSI Device emulation
3 *
4 * Copyright (c) 2006 CodeSourcery.
5 * Based on code by Fabrice Bellard
6 *
7 * Written by Paul Brook
8 * Modifications:
9 * 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
10 * when the allocation length of CDB is smaller
11 * than 36.
12 * 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
13 * MODE SENSE response.
14 *
15 * This code is licensed under the LGPL.
16 *
17 * Note that this file only handles the SCSI architecture model and device
18 * commands. Emulation of interface/link layer protocols is handled by
19 * the host adapter emulator.
20 */
21
22 //#define DEBUG_SCSI
23
24 #ifdef DEBUG_SCSI
25 #define DPRINTF(fmt, ...) \
26 do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
27 #else
28 #define DPRINTF(fmt, ...) do {} while(0)
29 #endif
30
31 #include "qemu-common.h"
32 #include "qemu/error-report.h"
33 #include "hw/scsi/scsi.h"
34 #include "block/scsi.h"
35 #include "sysemu/sysemu.h"
36 #include "sysemu/blockdev.h"
37 #include "hw/block/block.h"
38 #include "sysemu/dma.h"
39
40 #ifdef __linux
41 #include <scsi/sg.h>
42 #endif
43
44 #define SCSI_DMA_BUF_SIZE 131072
45 #define SCSI_MAX_INQUIRY_LEN 256
46 #define SCSI_MAX_MODE_LEN 256
47
48 #define DEFAULT_DISCARD_GRANULARITY 4096
49
50 typedef struct SCSIDiskState SCSIDiskState;
51
52 typedef struct SCSIDiskReq {
53 SCSIRequest req;
54 /* Both sector and sector_count are in terms of qemu 512 byte blocks. */
55 uint64_t sector;
56 uint32_t sector_count;
57 uint32_t buflen;
58 bool started;
59 struct iovec iov;
60 QEMUIOVector qiov;
61 BlockAcctCookie acct;
62 } SCSIDiskReq;
63
64 #define SCSI_DISK_F_REMOVABLE 0
65 #define SCSI_DISK_F_DPOFUA 1
66
67 struct SCSIDiskState
68 {
69 SCSIDevice qdev;
70 uint32_t features;
71 bool media_changed;
72 bool media_event;
73 bool eject_request;
74 uint64_t wwn;
75 QEMUBH *bh;
76 char *version;
77 char *serial;
78 char *vendor;
79 char *product;
80 bool tray_open;
81 bool tray_locked;
82 };
83
84 static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
85
86 static void scsi_free_request(SCSIRequest *req)
87 {
88 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
89
90 qemu_vfree(r->iov.iov_base);
91 }
92
93 /* Helper function for command completion with sense. */
94 static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
95 {
96 DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
97 r->req.tag, sense.key, sense.asc, sense.ascq);
98 scsi_req_build_sense(&r->req, sense);
99 scsi_req_complete(&r->req, CHECK_CONDITION);
100 }
101
102 /* Cancel a pending data transfer. */
103 static void scsi_cancel_io(SCSIRequest *req)
104 {
105 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
106
107 DPRINTF("Cancel tag=0x%x\n", req->tag);
108 if (r->req.aiocb) {
109 bdrv_aio_cancel(r->req.aiocb);
110
111 /* This reference was left in by scsi_*_data. We take ownership of
112 * it the moment scsi_req_cancel is called, independent of whether
113 * bdrv_aio_cancel completes the request or not. */
114 scsi_req_unref(&r->req);
115 }
116 r->req.aiocb = NULL;
117 }
118
119 static uint32_t scsi_init_iovec(SCSIDiskReq *r, size_t size)
120 {
121 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
122
123 if (!r->iov.iov_base) {
124 r->buflen = size;
125 r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
126 }
127 r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
128 qemu_iovec_init_external(&r->qiov, &r->iov, 1);
129 return r->qiov.size / 512;
130 }
131
132 static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req)
133 {
134 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
135
136 qemu_put_be64s(f, &r->sector);
137 qemu_put_be32s(f, &r->sector_count);
138 qemu_put_be32s(f, &r->buflen);
139 if (r->buflen) {
140 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
141 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
142 } else if (!req->retry) {
143 uint32_t len = r->iov.iov_len;
144 qemu_put_be32s(f, &len);
145 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
146 }
147 }
148 }
149
150 static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
151 {
152 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
153
154 qemu_get_be64s(f, &r->sector);
155 qemu_get_be32s(f, &r->sector_count);
156 qemu_get_be32s(f, &r->buflen);
157 if (r->buflen) {
158 scsi_init_iovec(r, r->buflen);
159 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
160 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
161 } else if (!r->req.retry) {
162 uint32_t len;
163 qemu_get_be32s(f, &len);
164 r->iov.iov_len = len;
165 assert(r->iov.iov_len <= r->buflen);
166 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
167 }
168 }
169
170 qemu_iovec_init_external(&r->qiov, &r->iov, 1);
171 }
172
173 static void scsi_aio_complete(void *opaque, int ret)
174 {
175 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
176 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
177
178 assert(r->req.aiocb != NULL);
179 r->req.aiocb = NULL;
180 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
181 if (r->req.io_canceled) {
182 goto done;
183 }
184
185 if (ret < 0) {
186 if (scsi_handle_rw_error(r, -ret)) {
187 goto done;
188 }
189 }
190
191 scsi_req_complete(&r->req, GOOD);
192
193 done:
194 if (!r->req.io_canceled) {
195 scsi_req_unref(&r->req);
196 }
197 }
198
199 static bool scsi_is_cmd_fua(SCSICommand *cmd)
200 {
201 switch (cmd->buf[0]) {
202 case READ_10:
203 case READ_12:
204 case READ_16:
205 case WRITE_10:
206 case WRITE_12:
207 case WRITE_16:
208 return (cmd->buf[1] & 8) != 0;
209
210 case VERIFY_10:
211 case VERIFY_12:
212 case VERIFY_16:
213 case WRITE_VERIFY_10:
214 case WRITE_VERIFY_12:
215 case WRITE_VERIFY_16:
216 return true;
217
218 case READ_6:
219 case WRITE_6:
220 default:
221 return false;
222 }
223 }
224
225 static void scsi_write_do_fua(SCSIDiskReq *r)
226 {
227 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
228
229 if (r->req.io_canceled) {
230 goto done;
231 }
232
233 if (scsi_is_cmd_fua(&r->req.cmd)) {
234 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
235 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
236 return;
237 }
238
239 scsi_req_complete(&r->req, GOOD);
240
241 done:
242 if (!r->req.io_canceled) {
243 scsi_req_unref(&r->req);
244 }
245 }
246
247 static void scsi_dma_complete(void *opaque, int ret)
248 {
249 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
250 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
251
252 assert(r->req.aiocb != NULL);
253 r->req.aiocb = NULL;
254 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
255 if (r->req.io_canceled) {
256 goto done;
257 }
258
259 if (ret < 0) {
260 if (scsi_handle_rw_error(r, -ret)) {
261 goto done;
262 }
263 }
264
265 r->sector += r->sector_count;
266 r->sector_count = 0;
267 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
268 scsi_write_do_fua(r);
269 return;
270 } else {
271 scsi_req_complete(&r->req, GOOD);
272 }
273
274 done:
275 if (!r->req.io_canceled) {
276 scsi_req_unref(&r->req);
277 }
278 }
279
280 static void scsi_read_complete(void * opaque, int ret)
281 {
282 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
283 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
284 int n;
285
286 assert(r->req.aiocb != NULL);
287 r->req.aiocb = NULL;
288 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
289 if (r->req.io_canceled) {
290 goto done;
291 }
292
293 if (ret < 0) {
294 if (scsi_handle_rw_error(r, -ret)) {
295 goto done;
296 }
297 }
298
299 DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
300
301 n = r->qiov.size / 512;
302 r->sector += n;
303 r->sector_count -= n;
304 scsi_req_data(&r->req, r->qiov.size);
305
306 done:
307 if (!r->req.io_canceled) {
308 scsi_req_unref(&r->req);
309 }
310 }
311
312 /* Actually issue a read to the block device. */
313 static void scsi_do_read(void *opaque, int ret)
314 {
315 SCSIDiskReq *r = opaque;
316 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
317 uint32_t n;
318
319 if (r->req.aiocb != NULL) {
320 r->req.aiocb = NULL;
321 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
322 }
323 if (r->req.io_canceled) {
324 goto done;
325 }
326
327 if (ret < 0) {
328 if (scsi_handle_rw_error(r, -ret)) {
329 goto done;
330 }
331 }
332
333 /* The request is used as the AIO opaque value, so add a ref. */
334 scsi_req_ref(&r->req);
335
336 if (r->req.sg) {
337 dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_READ);
338 r->req.resid -= r->req.sg->size;
339 r->req.aiocb = dma_bdrv_read(s->qdev.conf.bs, r->req.sg, r->sector,
340 scsi_dma_complete, r);
341 } else {
342 n = scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
343 bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
344 r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
345 scsi_read_complete, r);
346 }
347
348 done:
349 if (!r->req.io_canceled) {
350 scsi_req_unref(&r->req);
351 }
352 }
353
354 /* Read more data from scsi device into buffer. */
355 static void scsi_read_data(SCSIRequest *req)
356 {
357 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
358 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
359 bool first;
360
361 DPRINTF("Read sector_count=%d\n", r->sector_count);
362 if (r->sector_count == 0) {
363 /* This also clears the sense buffer for REQUEST SENSE. */
364 scsi_req_complete(&r->req, GOOD);
365 return;
366 }
367
368 /* No data transfer may already be in progress */
369 assert(r->req.aiocb == NULL);
370
371 /* The request is used as the AIO opaque value, so add a ref. */
372 scsi_req_ref(&r->req);
373 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
374 DPRINTF("Data transfer direction invalid\n");
375 scsi_read_complete(r, -EINVAL);
376 return;
377 }
378
379 if (s->tray_open) {
380 scsi_read_complete(r, -ENOMEDIUM);
381 return;
382 }
383
384 first = !r->started;
385 r->started = true;
386 if (first && scsi_is_cmd_fua(&r->req.cmd)) {
387 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
388 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_do_read, r);
389 } else {
390 scsi_do_read(r, 0);
391 }
392 }
393
394 /*
395 * scsi_handle_rw_error has two return values. 0 means that the error
396 * must be ignored, 1 means that the error has been processed and the
397 * caller should not do anything else for this request. Note that
398 * scsi_handle_rw_error always manages its reference counts, independent
399 * of the return value.
400 */
401 static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
402 {
403 bool is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
404 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
405 BlockErrorAction action = bdrv_get_error_action(s->qdev.conf.bs, is_read, error);
406
407 if (action == BDRV_ACTION_REPORT) {
408 switch (error) {
409 case ENOMEDIUM:
410 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
411 break;
412 case ENOMEM:
413 scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
414 break;
415 case EINVAL:
416 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
417 break;
418 default:
419 scsi_check_condition(r, SENSE_CODE(IO_ERROR));
420 break;
421 }
422 }
423 bdrv_error_action(s->qdev.conf.bs, action, is_read, error);
424 if (action == BDRV_ACTION_STOP) {
425 scsi_req_retry(&r->req);
426 }
427 return action != BDRV_ACTION_IGNORE;
428 }
429
430 static void scsi_write_complete(void * opaque, int ret)
431 {
432 SCSIDiskReq *r = (SCSIDiskReq *)opaque;
433 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
434 uint32_t n;
435
436 if (r->req.aiocb != NULL) {
437 r->req.aiocb = NULL;
438 bdrv_acct_done(s->qdev.conf.bs, &r->acct);
439 }
440 if (r->req.io_canceled) {
441 goto done;
442 }
443
444 if (ret < 0) {
445 if (scsi_handle_rw_error(r, -ret)) {
446 goto done;
447 }
448 }
449
450 n = r->qiov.size / 512;
451 r->sector += n;
452 r->sector_count -= n;
453 if (r->sector_count == 0) {
454 scsi_write_do_fua(r);
455 return;
456 } else {
457 scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
458 DPRINTF("Write complete tag=0x%x more=%zd\n", r->req.tag, r->qiov.size);
459 scsi_req_data(&r->req, r->qiov.size);
460 }
461
462 done:
463 if (!r->req.io_canceled) {
464 scsi_req_unref(&r->req);
465 }
466 }
467
468 static void scsi_write_data(SCSIRequest *req)
469 {
470 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
471 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
472 uint32_t n;
473
474 /* No data transfer may already be in progress */
475 assert(r->req.aiocb == NULL);
476
477 /* The request is used as the AIO opaque value, so add a ref. */
478 scsi_req_ref(&r->req);
479 if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
480 DPRINTF("Data transfer direction invalid\n");
481 scsi_write_complete(r, -EINVAL);
482 return;
483 }
484
485 if (!r->req.sg && !r->qiov.size) {
486 /* Called for the first time. Ask the driver to send us more data. */
487 r->started = true;
488 scsi_write_complete(r, 0);
489 return;
490 }
491 if (s->tray_open) {
492 scsi_write_complete(r, -ENOMEDIUM);
493 return;
494 }
495
496 if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 ||
497 r->req.cmd.buf[0] == VERIFY_16) {
498 if (r->req.sg) {
499 scsi_dma_complete(r, 0);
500 } else {
501 scsi_write_complete(r, 0);
502 }
503 return;
504 }
505
506 if (r->req.sg) {
507 dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_WRITE);
508 r->req.resid -= r->req.sg->size;
509 r->req.aiocb = dma_bdrv_write(s->qdev.conf.bs, r->req.sg, r->sector,
510 scsi_dma_complete, r);
511 } else {
512 n = r->qiov.size / 512;
513 bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
514 r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
515 scsi_write_complete, r);
516 }
517 }
518
519 /* Return a pointer to the data buffer. */
520 static uint8_t *scsi_get_buf(SCSIRequest *req)
521 {
522 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
523
524 return (uint8_t *)r->iov.iov_base;
525 }
526
527 static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
528 {
529 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
530 int buflen = 0;
531 int start;
532
533 if (req->cmd.buf[1] & 0x1) {
534 /* Vital product data */
535 uint8_t page_code = req->cmd.buf[2];
536
537 outbuf[buflen++] = s->qdev.type & 0x1f;
538 outbuf[buflen++] = page_code ; // this page
539 outbuf[buflen++] = 0x00;
540 outbuf[buflen++] = 0x00;
541 start = buflen;
542
543 switch (page_code) {
544 case 0x00: /* Supported page codes, mandatory */
545 {
546 DPRINTF("Inquiry EVPD[Supported pages] "
547 "buffer size %zd\n", req->cmd.xfer);
548 outbuf[buflen++] = 0x00; // list of supported pages (this page)
549 if (s->serial) {
550 outbuf[buflen++] = 0x80; // unit serial number
551 }
552 outbuf[buflen++] = 0x83; // device identification
553 if (s->qdev.type == TYPE_DISK) {
554 outbuf[buflen++] = 0xb0; // block limits
555 outbuf[buflen++] = 0xb2; // thin provisioning
556 }
557 break;
558 }
559 case 0x80: /* Device serial number, optional */
560 {
561 int l;
562
563 if (!s->serial) {
564 DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
565 return -1;
566 }
567
568 l = strlen(s->serial);
569 if (l > 20) {
570 l = 20;
571 }
572
573 DPRINTF("Inquiry EVPD[Serial number] "
574 "buffer size %zd\n", req->cmd.xfer);
575 memcpy(outbuf+buflen, s->serial, l);
576 buflen += l;
577 break;
578 }
579
580 case 0x83: /* Device identification page, mandatory */
581 {
582 const char *str = s->serial ?: bdrv_get_device_name(s->qdev.conf.bs);
583 int max_len = s->serial ? 20 : 255 - 8;
584 int id_len = strlen(str);
585
586 if (id_len > max_len) {
587 id_len = max_len;
588 }
589 DPRINTF("Inquiry EVPD[Device identification] "
590 "buffer size %zd\n", req->cmd.xfer);
591
592 outbuf[buflen++] = 0x2; // ASCII
593 outbuf[buflen++] = 0; // not officially assigned
594 outbuf[buflen++] = 0; // reserved
595 outbuf[buflen++] = id_len; // length of data following
596 memcpy(outbuf+buflen, str, id_len);
597 buflen += id_len;
598
599 if (s->wwn) {
600 outbuf[buflen++] = 0x1; // Binary
601 outbuf[buflen++] = 0x3; // NAA
602 outbuf[buflen++] = 0; // reserved
603 outbuf[buflen++] = 8;
604 stq_be_p(&outbuf[buflen], s->wwn);
605 buflen += 8;
606 }
607 break;
608 }
609 case 0xb0: /* block limits */
610 {
611 unsigned int unmap_sectors =
612 s->qdev.conf.discard_granularity / s->qdev.blocksize;
613 unsigned int min_io_size =
614 s->qdev.conf.min_io_size / s->qdev.blocksize;
615 unsigned int opt_io_size =
616 s->qdev.conf.opt_io_size / s->qdev.blocksize;
617
618 if (s->qdev.type == TYPE_ROM) {
619 DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
620 page_code);
621 return -1;
622 }
623 /* required VPD size with unmap support */
624 buflen = 0x40;
625 memset(outbuf + 4, 0, buflen - 4);
626
627 /* optimal transfer length granularity */
628 outbuf[6] = (min_io_size >> 8) & 0xff;
629 outbuf[7] = min_io_size & 0xff;
630
631 /* optimal transfer length */
632 outbuf[12] = (opt_io_size >> 24) & 0xff;
633 outbuf[13] = (opt_io_size >> 16) & 0xff;
634 outbuf[14] = (opt_io_size >> 8) & 0xff;
635 outbuf[15] = opt_io_size & 0xff;
636
637 /* optimal unmap granularity */
638 outbuf[28] = (unmap_sectors >> 24) & 0xff;
639 outbuf[29] = (unmap_sectors >> 16) & 0xff;
640 outbuf[30] = (unmap_sectors >> 8) & 0xff;
641 outbuf[31] = unmap_sectors & 0xff;
642 break;
643 }
644 case 0xb2: /* thin provisioning */
645 {
646 buflen = 8;
647 outbuf[4] = 0;
648 outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */
649 outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1;
650 outbuf[7] = 0;
651 break;
652 }
653 default:
654 return -1;
655 }
656 /* done with EVPD */
657 assert(buflen - start <= 255);
658 outbuf[start - 1] = buflen - start;
659 return buflen;
660 }
661
662 /* Standard INQUIRY data */
663 if (req->cmd.buf[2] != 0) {
664 return -1;
665 }
666
667 /* PAGE CODE == 0 */
668 buflen = req->cmd.xfer;
669 if (buflen > SCSI_MAX_INQUIRY_LEN) {
670 buflen = SCSI_MAX_INQUIRY_LEN;
671 }
672
673 outbuf[0] = s->qdev.type & 0x1f;
674 outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0;
675
676 strpadcpy((char *) &outbuf[16], 16, s->product, ' ');
677 strpadcpy((char *) &outbuf[8], 8, s->vendor, ' ');
678
679 memset(&outbuf[32], 0, 4);
680 memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
681 /*
682 * We claim conformance to SPC-3, which is required for guests
683 * to ask for modern features like READ CAPACITY(16) or the
684 * block characteristics VPD page by default. Not all of SPC-3
685 * is actually implemented, but we're good enough.
686 */
687 outbuf[2] = 5;
688 outbuf[3] = 2 | 0x10; /* Format 2, HiSup */
689
690 if (buflen > 36) {
691 outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
692 } else {
693 /* If the allocation length of CDB is too small,
694 the additional length is not adjusted */
695 outbuf[4] = 36 - 5;
696 }
697
698 /* Sync data transfer and TCQ. */
699 outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
700 return buflen;
701 }
702
703 static inline bool media_is_dvd(SCSIDiskState *s)
704 {
705 uint64_t nb_sectors;
706 if (s->qdev.type != TYPE_ROM) {
707 return false;
708 }
709 if (!bdrv_is_inserted(s->qdev.conf.bs)) {
710 return false;
711 }
712 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
713 return nb_sectors > CD_MAX_SECTORS;
714 }
715
716 static inline bool media_is_cd(SCSIDiskState *s)
717 {
718 uint64_t nb_sectors;
719 if (s->qdev.type != TYPE_ROM) {
720 return false;
721 }
722 if (!bdrv_is_inserted(s->qdev.conf.bs)) {
723 return false;
724 }
725 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
726 return nb_sectors <= CD_MAX_SECTORS;
727 }
728
729 static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r,
730 uint8_t *outbuf)
731 {
732 uint8_t type = r->req.cmd.buf[1] & 7;
733
734 if (s->qdev.type != TYPE_ROM) {
735 return -1;
736 }
737
738 /* Types 1/2 are only defined for Blu-Ray. */
739 if (type != 0) {
740 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
741 return -1;
742 }
743
744 memset(outbuf, 0, 34);
745 outbuf[1] = 32;
746 outbuf[2] = 0xe; /* last session complete, disc finalized */
747 outbuf[3] = 1; /* first track on disc */
748 outbuf[4] = 1; /* # of sessions */
749 outbuf[5] = 1; /* first track of last session */
750 outbuf[6] = 1; /* last track of last session */
751 outbuf[7] = 0x20; /* unrestricted use */
752 outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */
753 /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
754 /* 12-23: not meaningful for CD-ROM or DVD-ROM */
755 /* 24-31: disc bar code */
756 /* 32: disc application code */
757 /* 33: number of OPC tables */
758
759 return 34;
760 }
761
762 static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
763 uint8_t *outbuf)
764 {
765 static const int rds_caps_size[5] = {
766 [0] = 2048 + 4,
767 [1] = 4 + 4,
768 [3] = 188 + 4,
769 [4] = 2048 + 4,
770 };
771
772 uint8_t media = r->req.cmd.buf[1];
773 uint8_t layer = r->req.cmd.buf[6];
774 uint8_t format = r->req.cmd.buf[7];
775 int size = -1;
776
777 if (s->qdev.type != TYPE_ROM) {
778 return -1;
779 }
780 if (media != 0) {
781 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
782 return -1;
783 }
784
785 if (format != 0xff) {
786 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
787 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
788 return -1;
789 }
790 if (media_is_cd(s)) {
791 scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
792 return -1;
793 }
794 if (format >= ARRAY_SIZE(rds_caps_size)) {
795 return -1;
796 }
797 size = rds_caps_size[format];
798 memset(outbuf, 0, size);
799 }
800
801 switch (format) {
802 case 0x00: {
803 /* Physical format information */
804 uint64_t nb_sectors;
805 if (layer != 0) {
806 goto fail;
807 }
808 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
809
810 outbuf[4] = 1; /* DVD-ROM, part version 1 */
811 outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
812 outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */
813 outbuf[7] = 0; /* default densities */
814
815 stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
816 stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
817 break;
818 }
819
820 case 0x01: /* DVD copyright information, all zeros */
821 break;
822
823 case 0x03: /* BCA information - invalid field for no BCA info */
824 return -1;
825
826 case 0x04: /* DVD disc manufacturing information, all zeros */
827 break;
828
829 case 0xff: { /* List capabilities */
830 int i;
831 size = 4;
832 for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
833 if (!rds_caps_size[i]) {
834 continue;
835 }
836 outbuf[size] = i;
837 outbuf[size + 1] = 0x40; /* Not writable, readable */
838 stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
839 size += 4;
840 }
841 break;
842 }
843
844 default:
845 return -1;
846 }
847
848 /* Size of buffer, not including 2 byte size field */
849 stw_be_p(outbuf, size - 2);
850 return size;
851
852 fail:
853 return -1;
854 }
855
856 static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
857 {
858 uint8_t event_code, media_status;
859
860 media_status = 0;
861 if (s->tray_open) {
862 media_status = MS_TRAY_OPEN;
863 } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
864 media_status = MS_MEDIA_PRESENT;
865 }
866
867 /* Event notification descriptor */
868 event_code = MEC_NO_CHANGE;
869 if (media_status != MS_TRAY_OPEN) {
870 if (s->media_event) {
871 event_code = MEC_NEW_MEDIA;
872 s->media_event = false;
873 } else if (s->eject_request) {
874 event_code = MEC_EJECT_REQUESTED;
875 s->eject_request = false;
876 }
877 }
878
879 outbuf[0] = event_code;
880 outbuf[1] = media_status;
881
882 /* These fields are reserved, just clear them. */
883 outbuf[2] = 0;
884 outbuf[3] = 0;
885 return 4;
886 }
887
888 static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
889 uint8_t *outbuf)
890 {
891 int size;
892 uint8_t *buf = r->req.cmd.buf;
893 uint8_t notification_class_request = buf[4];
894 if (s->qdev.type != TYPE_ROM) {
895 return -1;
896 }
897 if ((buf[1] & 1) == 0) {
898 /* asynchronous */
899 return -1;
900 }
901
902 size = 4;
903 outbuf[0] = outbuf[1] = 0;
904 outbuf[3] = 1 << GESN_MEDIA; /* supported events */
905 if (notification_class_request & (1 << GESN_MEDIA)) {
906 outbuf[2] = GESN_MEDIA;
907 size += scsi_event_status_media(s, &outbuf[size]);
908 } else {
909 outbuf[2] = 0x80;
910 }
911 stw_be_p(outbuf, size - 4);
912 return size;
913 }
914
915 static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
916 {
917 int current;
918
919 if (s->qdev.type != TYPE_ROM) {
920 return -1;
921 }
922 current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
923 memset(outbuf, 0, 40);
924 stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
925 stw_be_p(&outbuf[6], current);
926 /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
927 outbuf[10] = 0x03; /* persistent, current */
928 outbuf[11] = 8; /* two profiles */
929 stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
930 outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
931 stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
932 outbuf[18] = (current == MMC_PROFILE_CD_ROM);
933 /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
934 stw_be_p(&outbuf[20], 1);
935 outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
936 outbuf[23] = 8;
937 stl_be_p(&outbuf[24], 1); /* SCSI */
938 outbuf[28] = 1; /* DBE = 1, mandatory */
939 /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
940 stw_be_p(&outbuf[32], 3);
941 outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
942 outbuf[35] = 4;
943 outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
944 /* TODO: Random readable, CD read, DVD read, drive serial number,
945 power management */
946 return 40;
947 }
948
949 static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
950 {
951 if (s->qdev.type != TYPE_ROM) {
952 return -1;
953 }
954 memset(outbuf, 0, 8);
955 outbuf[5] = 1; /* CD-ROM */
956 return 8;
957 }
958
959 static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
960 int page_control)
961 {
962 static const int mode_sense_valid[0x3f] = {
963 [MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
964 [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
965 [MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
966 [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
967 [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM),
968 [MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
969 };
970
971 uint8_t *p = *p_outbuf + 2;
972 int length;
973
974 if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
975 return -1;
976 }
977
978 /*
979 * If Changeable Values are requested, a mask denoting those mode parameters
980 * that are changeable shall be returned. As we currently don't support
981 * parameter changes via MODE_SELECT all bits are returned set to zero.
982 * The buffer was already menset to zero by the caller of this function.
983 *
984 * The offsets here are off by two compared to the descriptions in the
985 * SCSI specs, because those include a 2-byte header. This is unfortunate,
986 * but it is done so that offsets are consistent within our implementation
987 * of MODE SENSE and MODE SELECT. MODE SELECT has to deal with both
988 * 2-byte and 4-byte headers.
989 */
990 switch (page) {
991 case MODE_PAGE_HD_GEOMETRY:
992 length = 0x16;
993 if (page_control == 1) { /* Changeable Values */
994 break;
995 }
996 /* if a geometry hint is available, use it */
997 p[0] = (s->qdev.conf.cyls >> 16) & 0xff;
998 p[1] = (s->qdev.conf.cyls >> 8) & 0xff;
999 p[2] = s->qdev.conf.cyls & 0xff;
1000 p[3] = s->qdev.conf.heads & 0xff;
1001 /* Write precomp start cylinder, disabled */
1002 p[4] = (s->qdev.conf.cyls >> 16) & 0xff;
1003 p[5] = (s->qdev.conf.cyls >> 8) & 0xff;
1004 p[6] = s->qdev.conf.cyls & 0xff;
1005 /* Reduced current start cylinder, disabled */
1006 p[7] = (s->qdev.conf.cyls >> 16) & 0xff;
1007 p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
1008 p[9] = s->qdev.conf.cyls & 0xff;
1009 /* Device step rate [ns], 200ns */
1010 p[10] = 0;
1011 p[11] = 200;
1012 /* Landing zone cylinder */
1013 p[12] = 0xff;
1014 p[13] = 0xff;
1015 p[14] = 0xff;
1016 /* Medium rotation rate [rpm], 5400 rpm */
1017 p[18] = (5400 >> 8) & 0xff;
1018 p[19] = 5400 & 0xff;
1019 break;
1020
1021 case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
1022 length = 0x1e;
1023 if (page_control == 1) { /* Changeable Values */
1024 break;
1025 }
1026 /* Transfer rate [kbit/s], 5Mbit/s */
1027 p[0] = 5000 >> 8;
1028 p[1] = 5000 & 0xff;
1029 /* if a geometry hint is available, use it */
1030 p[2] = s->qdev.conf.heads & 0xff;
1031 p[3] = s->qdev.conf.secs & 0xff;
1032 p[4] = s->qdev.blocksize >> 8;
1033 p[6] = (s->qdev.conf.cyls >> 8) & 0xff;
1034 p[7] = s->qdev.conf.cyls & 0xff;
1035 /* Write precomp start cylinder, disabled */
1036 p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
1037 p[9] = s->qdev.conf.cyls & 0xff;
1038 /* Reduced current start cylinder, disabled */
1039 p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
1040 p[11] = s->qdev.conf.cyls & 0xff;
1041 /* Device step rate [100us], 100us */
1042 p[12] = 0;
1043 p[13] = 1;
1044 /* Device step pulse width [us], 1us */
1045 p[14] = 1;
1046 /* Device head settle delay [100us], 100us */
1047 p[15] = 0;
1048 p[16] = 1;
1049 /* Motor on delay [0.1s], 0.1s */
1050 p[17] = 1;
1051 /* Motor off delay [0.1s], 0.1s */
1052 p[18] = 1;
1053 /* Medium rotation rate [rpm], 5400 rpm */
1054 p[26] = (5400 >> 8) & 0xff;
1055 p[27] = 5400 & 0xff;
1056 break;
1057
1058 case MODE_PAGE_CACHING:
1059 length = 0x12;
1060 if (page_control == 1 || /* Changeable Values */
1061 bdrv_enable_write_cache(s->qdev.conf.bs)) {
1062 p[0] = 4; /* WCE */
1063 }
1064 break;
1065
1066 case MODE_PAGE_R_W_ERROR:
1067 length = 10;
1068 if (page_control == 1) { /* Changeable Values */
1069 break;
1070 }
1071 p[0] = 0x80; /* Automatic Write Reallocation Enabled */
1072 if (s->qdev.type == TYPE_ROM) {
1073 p[1] = 0x20; /* Read Retry Count */
1074 }
1075 break;
1076
1077 case MODE_PAGE_AUDIO_CTL:
1078 length = 14;
1079 break;
1080
1081 case MODE_PAGE_CAPABILITIES:
1082 length = 0x14;
1083 if (page_control == 1) { /* Changeable Values */
1084 break;
1085 }
1086
1087 p[0] = 0x3b; /* CD-R & CD-RW read */
1088 p[1] = 0; /* Writing not supported */
1089 p[2] = 0x7f; /* Audio, composite, digital out,
1090 mode 2 form 1&2, multi session */
1091 p[3] = 0xff; /* CD DA, DA accurate, RW supported,
1092 RW corrected, C2 errors, ISRC,
1093 UPC, Bar code */
1094 p[4] = 0x2d | (s->tray_locked ? 2 : 0);
1095 /* Locking supported, jumper present, eject, tray */
1096 p[5] = 0; /* no volume & mute control, no
1097 changer */
1098 p[6] = (50 * 176) >> 8; /* 50x read speed */
1099 p[7] = (50 * 176) & 0xff;
1100 p[8] = 2 >> 8; /* Two volume levels */
1101 p[9] = 2 & 0xff;
1102 p[10] = 2048 >> 8; /* 2M buffer */
1103 p[11] = 2048 & 0xff;
1104 p[12] = (16 * 176) >> 8; /* 16x read speed current */
1105 p[13] = (16 * 176) & 0xff;
1106 p[16] = (16 * 176) >> 8; /* 16x write speed */
1107 p[17] = (16 * 176) & 0xff;
1108 p[18] = (16 * 176) >> 8; /* 16x write speed current */
1109 p[19] = (16 * 176) & 0xff;
1110 break;
1111
1112 default:
1113 return -1;
1114 }
1115
1116 assert(length < 256);
1117 (*p_outbuf)[0] = page;
1118 (*p_outbuf)[1] = length;
1119 *p_outbuf += length + 2;
1120 return length + 2;
1121 }
1122
1123 static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
1124 {
1125 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1126 uint64_t nb_sectors;
1127 bool dbd;
1128 int page, buflen, ret, page_control;
1129 uint8_t *p;
1130 uint8_t dev_specific_param;
1131
1132 dbd = (r->req.cmd.buf[1] & 0x8) != 0;
1133 page = r->req.cmd.buf[2] & 0x3f;
1134 page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
1135 DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
1136 (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
1137 memset(outbuf, 0, r->req.cmd.xfer);
1138 p = outbuf;
1139
1140 if (s->qdev.type == TYPE_DISK) {
1141 dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0;
1142 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1143 dev_specific_param |= 0x80; /* Readonly. */
1144 }
1145 } else {
1146 /* MMC prescribes that CD/DVD drives have no block descriptors,
1147 * and defines no device-specific parameter. */
1148 dev_specific_param = 0x00;
1149 dbd = true;
1150 }
1151
1152 if (r->req.cmd.buf[0] == MODE_SENSE) {
1153 p[1] = 0; /* Default media type. */
1154 p[2] = dev_specific_param;
1155 p[3] = 0; /* Block descriptor length. */
1156 p += 4;
1157 } else { /* MODE_SENSE_10 */
1158 p[2] = 0; /* Default media type. */
1159 p[3] = dev_specific_param;
1160 p[6] = p[7] = 0; /* Block descriptor length. */
1161 p += 8;
1162 }
1163
1164 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1165 if (!dbd && nb_sectors) {
1166 if (r->req.cmd.buf[0] == MODE_SENSE) {
1167 outbuf[3] = 8; /* Block descriptor length */
1168 } else { /* MODE_SENSE_10 */
1169 outbuf[7] = 8; /* Block descriptor length */
1170 }
1171 nb_sectors /= (s->qdev.blocksize / 512);
1172 if (nb_sectors > 0xffffff) {
1173 nb_sectors = 0;
1174 }
1175 p[0] = 0; /* media density code */
1176 p[1] = (nb_sectors >> 16) & 0xff;
1177 p[2] = (nb_sectors >> 8) & 0xff;
1178 p[3] = nb_sectors & 0xff;
1179 p[4] = 0; /* reserved */
1180 p[5] = 0; /* bytes 5-7 are the sector size in bytes */
1181 p[6] = s->qdev.blocksize >> 8;
1182 p[7] = 0;
1183 p += 8;
1184 }
1185
1186 if (page_control == 3) {
1187 /* Saved Values */
1188 scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
1189 return -1;
1190 }
1191
1192 if (page == 0x3f) {
1193 for (page = 0; page <= 0x3e; page++) {
1194 mode_sense_page(s, page, &p, page_control);
1195 }
1196 } else {
1197 ret = mode_sense_page(s, page, &p, page_control);
1198 if (ret == -1) {
1199 return -1;
1200 }
1201 }
1202
1203 buflen = p - outbuf;
1204 /*
1205 * The mode data length field specifies the length in bytes of the
1206 * following data that is available to be transferred. The mode data
1207 * length does not include itself.
1208 */
1209 if (r->req.cmd.buf[0] == MODE_SENSE) {
1210 outbuf[0] = buflen - 1;
1211 } else { /* MODE_SENSE_10 */
1212 outbuf[0] = ((buflen - 2) >> 8) & 0xff;
1213 outbuf[1] = (buflen - 2) & 0xff;
1214 }
1215 return buflen;
1216 }
1217
1218 static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
1219 {
1220 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1221 int start_track, format, msf, toclen;
1222 uint64_t nb_sectors;
1223
1224 msf = req->cmd.buf[1] & 2;
1225 format = req->cmd.buf[2] & 0xf;
1226 start_track = req->cmd.buf[6];
1227 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1228 DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
1229 nb_sectors /= s->qdev.blocksize / 512;
1230 switch (format) {
1231 case 0:
1232 toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
1233 break;
1234 case 1:
1235 /* multi session : only a single session defined */
1236 toclen = 12;
1237 memset(outbuf, 0, 12);
1238 outbuf[1] = 0x0a;
1239 outbuf[2] = 0x01;
1240 outbuf[3] = 0x01;
1241 break;
1242 case 2:
1243 toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
1244 break;
1245 default:
1246 return -1;
1247 }
1248 return toclen;
1249 }
1250
1251 static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1252 {
1253 SCSIRequest *req = &r->req;
1254 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1255 bool start = req->cmd.buf[4] & 1;
1256 bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */
1257 int pwrcnd = req->cmd.buf[4] & 0xf0;
1258
1259 if (pwrcnd) {
1260 /* eject/load only happens for power condition == 0 */
1261 return 0;
1262 }
1263
1264 if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) {
1265 if (!start && !s->tray_open && s->tray_locked) {
1266 scsi_check_condition(r,
1267 bdrv_is_inserted(s->qdev.conf.bs)
1268 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
1269 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
1270 return -1;
1271 }
1272
1273 if (s->tray_open != !start) {
1274 bdrv_eject(s->qdev.conf.bs, !start);
1275 s->tray_open = !start;
1276 }
1277 }
1278 return 0;
1279 }
1280
1281 static void scsi_disk_emulate_read_data(SCSIRequest *req)
1282 {
1283 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1284 int buflen = r->iov.iov_len;
1285
1286 if (buflen) {
1287 DPRINTF("Read buf_len=%d\n", buflen);
1288 r->iov.iov_len = 0;
1289 r->started = true;
1290 scsi_req_data(&r->req, buflen);
1291 return;
1292 }
1293
1294 /* This also clears the sense buffer for REQUEST SENSE. */
1295 scsi_req_complete(&r->req, GOOD);
1296 }
1297
1298 static int scsi_disk_check_mode_select(SCSIDiskState *s, int page,
1299 uint8_t *inbuf, int inlen)
1300 {
1301 uint8_t mode_current[SCSI_MAX_MODE_LEN];
1302 uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
1303 uint8_t *p;
1304 int len, expected_len, changeable_len, i;
1305
1306 /* The input buffer does not include the page header, so it is
1307 * off by 2 bytes.
1308 */
1309 expected_len = inlen + 2;
1310 if (expected_len > SCSI_MAX_MODE_LEN) {
1311 return -1;
1312 }
1313
1314 p = mode_current;
1315 memset(mode_current, 0, inlen + 2);
1316 len = mode_sense_page(s, page, &p, 0);
1317 if (len < 0 || len != expected_len) {
1318 return -1;
1319 }
1320
1321 p = mode_changeable;
1322 memset(mode_changeable, 0, inlen + 2);
1323 changeable_len = mode_sense_page(s, page, &p, 1);
1324 assert(changeable_len == len);
1325
1326 /* Check that unchangeable bits are the same as what MODE SENSE
1327 * would return.
1328 */
1329 for (i = 2; i < len; i++) {
1330 if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
1331 return -1;
1332 }
1333 }
1334 return 0;
1335 }
1336
1337 static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p)
1338 {
1339 switch (page) {
1340 case MODE_PAGE_CACHING:
1341 bdrv_set_enable_write_cache(s->qdev.conf.bs, (p[0] & 4) != 0);
1342 break;
1343
1344 default:
1345 break;
1346 }
1347 }
1348
1349 static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change)
1350 {
1351 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1352
1353 while (len > 0) {
1354 int page, subpage, page_len;
1355
1356 /* Parse both possible formats for the mode page headers. */
1357 page = p[0] & 0x3f;
1358 if (p[0] & 0x40) {
1359 if (len < 4) {
1360 goto invalid_param_len;
1361 }
1362 subpage = p[1];
1363 page_len = lduw_be_p(&p[2]);
1364 p += 4;
1365 len -= 4;
1366 } else {
1367 if (len < 2) {
1368 goto invalid_param_len;
1369 }
1370 subpage = 0;
1371 page_len = p[1];
1372 p += 2;
1373 len -= 2;
1374 }
1375
1376 if (subpage) {
1377 goto invalid_param;
1378 }
1379 if (page_len > len) {
1380 goto invalid_param_len;
1381 }
1382
1383 if (!change) {
1384 if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) {
1385 goto invalid_param;
1386 }
1387 } else {
1388 scsi_disk_apply_mode_select(s, page, p);
1389 }
1390
1391 p += page_len;
1392 len -= page_len;
1393 }
1394 return 0;
1395
1396 invalid_param:
1397 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
1398 return -1;
1399
1400 invalid_param_len:
1401 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1402 return -1;
1403 }
1404
1405 static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf)
1406 {
1407 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1408 uint8_t *p = inbuf;
1409 int cmd = r->req.cmd.buf[0];
1410 int len = r->req.cmd.xfer;
1411 int hdr_len = (cmd == MODE_SELECT ? 4 : 8);
1412 int bd_len;
1413 int pass;
1414
1415 /* We only support PF=1, SP=0. */
1416 if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
1417 goto invalid_field;
1418 }
1419
1420 if (len < hdr_len) {
1421 goto invalid_param_len;
1422 }
1423
1424 bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6]));
1425 len -= hdr_len;
1426 p += hdr_len;
1427 if (len < bd_len) {
1428 goto invalid_param_len;
1429 }
1430 if (bd_len != 0 && bd_len != 8) {
1431 goto invalid_param;
1432 }
1433
1434 len -= bd_len;
1435 p += bd_len;
1436
1437 /* Ensure no change is made if there is an error! */
1438 for (pass = 0; pass < 2; pass++) {
1439 if (mode_select_pages(r, p, len, pass == 1) < 0) {
1440 assert(pass == 0);
1441 return;
1442 }
1443 }
1444 if (!bdrv_enable_write_cache(s->qdev.conf.bs)) {
1445 /* The request is used as the AIO opaque value, so add a ref. */
1446 scsi_req_ref(&r->req);
1447 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
1448 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
1449 return;
1450 }
1451
1452 scsi_req_complete(&r->req, GOOD);
1453 return;
1454
1455 invalid_param:
1456 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
1457 return;
1458
1459 invalid_param_len:
1460 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1461 return;
1462
1463 invalid_field:
1464 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1465 }
1466
1467 static inline bool check_lba_range(SCSIDiskState *s,
1468 uint64_t sector_num, uint32_t nb_sectors)
1469 {
1470 /*
1471 * The first line tests that no overflow happens when computing the last
1472 * sector. The second line tests that the last accessed sector is in
1473 * range.
1474 *
1475 * Careful, the computations should not underflow for nb_sectors == 0,
1476 * and a 0-block read to the first LBA beyond the end of device is
1477 * valid.
1478 */
1479 return (sector_num <= sector_num + nb_sectors &&
1480 sector_num + nb_sectors <= s->qdev.max_lba + 1);
1481 }
1482
1483 typedef struct UnmapCBData {
1484 SCSIDiskReq *r;
1485 uint8_t *inbuf;
1486 int count;
1487 } UnmapCBData;
1488
1489 static void scsi_unmap_complete(void *opaque, int ret)
1490 {
1491 UnmapCBData *data = opaque;
1492 SCSIDiskReq *r = data->r;
1493 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
1494 uint64_t sector_num;
1495 uint32_t nb_sectors;
1496
1497 r->req.aiocb = NULL;
1498 if (r->req.io_canceled) {
1499 goto done;
1500 }
1501
1502 if (ret < 0) {
1503 if (scsi_handle_rw_error(r, -ret)) {
1504 goto done;
1505 }
1506 }
1507
1508 if (data->count > 0) {
1509 sector_num = ldq_be_p(&data->inbuf[0]);
1510 nb_sectors = ldl_be_p(&data->inbuf[8]) & 0xffffffffULL;
1511 if (!check_lba_range(s, sector_num, nb_sectors)) {
1512 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1513 goto done;
1514 }
1515
1516 r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
1517 sector_num * (s->qdev.blocksize / 512),
1518 nb_sectors * (s->qdev.blocksize / 512),
1519 scsi_unmap_complete, data);
1520 data->count--;
1521 data->inbuf += 16;
1522 return;
1523 }
1524
1525 scsi_req_complete(&r->req, GOOD);
1526
1527 done:
1528 if (!r->req.io_canceled) {
1529 scsi_req_unref(&r->req);
1530 }
1531 g_free(data);
1532 }
1533
1534 static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf)
1535 {
1536 uint8_t *p = inbuf;
1537 int len = r->req.cmd.xfer;
1538 UnmapCBData *data;
1539
1540 if (len < 8) {
1541 goto invalid_param_len;
1542 }
1543 if (len < lduw_be_p(&p[0]) + 2) {
1544 goto invalid_param_len;
1545 }
1546 if (len < lduw_be_p(&p[2]) + 8) {
1547 goto invalid_param_len;
1548 }
1549 if (lduw_be_p(&p[2]) & 15) {
1550 goto invalid_param_len;
1551 }
1552
1553 data = g_new0(UnmapCBData, 1);
1554 data->r = r;
1555 data->inbuf = &p[8];
1556 data->count = lduw_be_p(&p[2]) >> 4;
1557
1558 /* The matching unref is in scsi_unmap_complete, before data is freed. */
1559 scsi_req_ref(&r->req);
1560 scsi_unmap_complete(data, 0);
1561 return;
1562
1563 invalid_param_len:
1564 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
1565 }
1566
1567 static void scsi_disk_emulate_write_data(SCSIRequest *req)
1568 {
1569 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1570
1571 if (r->iov.iov_len) {
1572 int buflen = r->iov.iov_len;
1573 DPRINTF("Write buf_len=%d\n", buflen);
1574 r->iov.iov_len = 0;
1575 scsi_req_data(&r->req, buflen);
1576 return;
1577 }
1578
1579 switch (req->cmd.buf[0]) {
1580 case MODE_SELECT:
1581 case MODE_SELECT_10:
1582 /* This also clears the sense buffer for REQUEST SENSE. */
1583 scsi_disk_emulate_mode_select(r, r->iov.iov_base);
1584 break;
1585
1586 case UNMAP:
1587 scsi_disk_emulate_unmap(r, r->iov.iov_base);
1588 break;
1589
1590 default:
1591 abort();
1592 }
1593 }
1594
1595 static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf)
1596 {
1597 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1598 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1599 uint64_t nb_sectors;
1600 uint8_t *outbuf;
1601 int buflen;
1602
1603 switch (req->cmd.buf[0]) {
1604 case INQUIRY:
1605 case MODE_SENSE:
1606 case MODE_SENSE_10:
1607 case RESERVE:
1608 case RESERVE_10:
1609 case RELEASE:
1610 case RELEASE_10:
1611 case START_STOP:
1612 case ALLOW_MEDIUM_REMOVAL:
1613 case GET_CONFIGURATION:
1614 case GET_EVENT_STATUS_NOTIFICATION:
1615 case MECHANISM_STATUS:
1616 case REQUEST_SENSE:
1617 break;
1618
1619 default:
1620 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1621 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1622 return 0;
1623 }
1624 break;
1625 }
1626
1627 /*
1628 * FIXME: we shouldn't return anything bigger than 4k, but the code
1629 * requires the buffer to be as big as req->cmd.xfer in several
1630 * places. So, do not allow CDBs with a very large ALLOCATION
1631 * LENGTH. The real fix would be to modify scsi_read_data and
1632 * dma_buf_read, so that they return data beyond the buflen
1633 * as all zeros.
1634 */
1635 if (req->cmd.xfer > 65536) {
1636 goto illegal_request;
1637 }
1638 r->buflen = MAX(4096, req->cmd.xfer);
1639
1640 if (!r->iov.iov_base) {
1641 r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
1642 }
1643
1644 buflen = req->cmd.xfer;
1645 outbuf = r->iov.iov_base;
1646 memset(outbuf, 0, r->buflen);
1647 switch (req->cmd.buf[0]) {
1648 case TEST_UNIT_READY:
1649 assert(!s->tray_open && bdrv_is_inserted(s->qdev.conf.bs));
1650 break;
1651 case INQUIRY:
1652 buflen = scsi_disk_emulate_inquiry(req, outbuf);
1653 if (buflen < 0) {
1654 goto illegal_request;
1655 }
1656 break;
1657 case MODE_SENSE:
1658 case MODE_SENSE_10:
1659 buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1660 if (buflen < 0) {
1661 goto illegal_request;
1662 }
1663 break;
1664 case READ_TOC:
1665 buflen = scsi_disk_emulate_read_toc(req, outbuf);
1666 if (buflen < 0) {
1667 goto illegal_request;
1668 }
1669 break;
1670 case RESERVE:
1671 if (req->cmd.buf[1] & 1) {
1672 goto illegal_request;
1673 }
1674 break;
1675 case RESERVE_10:
1676 if (req->cmd.buf[1] & 3) {
1677 goto illegal_request;
1678 }
1679 break;
1680 case RELEASE:
1681 if (req->cmd.buf[1] & 1) {
1682 goto illegal_request;
1683 }
1684 break;
1685 case RELEASE_10:
1686 if (req->cmd.buf[1] & 3) {
1687 goto illegal_request;
1688 }
1689 break;
1690 case START_STOP:
1691 if (scsi_disk_emulate_start_stop(r) < 0) {
1692 return 0;
1693 }
1694 break;
1695 case ALLOW_MEDIUM_REMOVAL:
1696 s->tray_locked = req->cmd.buf[4] & 1;
1697 bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
1698 break;
1699 case READ_CAPACITY_10:
1700 /* The normal LEN field for this command is zero. */
1701 memset(outbuf, 0, 8);
1702 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1703 if (!nb_sectors) {
1704 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1705 return 0;
1706 }
1707 if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
1708 goto illegal_request;
1709 }
1710 nb_sectors /= s->qdev.blocksize / 512;
1711 /* Returned value is the address of the last sector. */
1712 nb_sectors--;
1713 /* Remember the new size for read/write sanity checking. */
1714 s->qdev.max_lba = nb_sectors;
1715 /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1716 if (nb_sectors > UINT32_MAX) {
1717 nb_sectors = UINT32_MAX;
1718 }
1719 outbuf[0] = (nb_sectors >> 24) & 0xff;
1720 outbuf[1] = (nb_sectors >> 16) & 0xff;
1721 outbuf[2] = (nb_sectors >> 8) & 0xff;
1722 outbuf[3] = nb_sectors & 0xff;
1723 outbuf[4] = 0;
1724 outbuf[5] = 0;
1725 outbuf[6] = s->qdev.blocksize >> 8;
1726 outbuf[7] = 0;
1727 break;
1728 case REQUEST_SENSE:
1729 /* Just return "NO SENSE". */
1730 buflen = scsi_build_sense(NULL, 0, outbuf, r->buflen,
1731 (req->cmd.buf[1] & 1) == 0);
1732 if (buflen < 0) {
1733 goto illegal_request;
1734 }
1735 break;
1736 case MECHANISM_STATUS:
1737 buflen = scsi_emulate_mechanism_status(s, outbuf);
1738 if (buflen < 0) {
1739 goto illegal_request;
1740 }
1741 break;
1742 case GET_CONFIGURATION:
1743 buflen = scsi_get_configuration(s, outbuf);
1744 if (buflen < 0) {
1745 goto illegal_request;
1746 }
1747 break;
1748 case GET_EVENT_STATUS_NOTIFICATION:
1749 buflen = scsi_get_event_status_notification(s, r, outbuf);
1750 if (buflen < 0) {
1751 goto illegal_request;
1752 }
1753 break;
1754 case READ_DISC_INFORMATION:
1755 buflen = scsi_read_disc_information(s, r, outbuf);
1756 if (buflen < 0) {
1757 goto illegal_request;
1758 }
1759 break;
1760 case READ_DVD_STRUCTURE:
1761 buflen = scsi_read_dvd_structure(s, r, outbuf);
1762 if (buflen < 0) {
1763 goto illegal_request;
1764 }
1765 break;
1766 case SERVICE_ACTION_IN_16:
1767 /* Service Action In subcommands. */
1768 if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1769 DPRINTF("SAI READ CAPACITY(16)\n");
1770 memset(outbuf, 0, req->cmd.xfer);
1771 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1772 if (!nb_sectors) {
1773 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1774 return 0;
1775 }
1776 if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
1777 goto illegal_request;
1778 }
1779 nb_sectors /= s->qdev.blocksize / 512;
1780 /* Returned value is the address of the last sector. */
1781 nb_sectors--;
1782 /* Remember the new size for read/write sanity checking. */
1783 s->qdev.max_lba = nb_sectors;
1784 outbuf[0] = (nb_sectors >> 56) & 0xff;
1785 outbuf[1] = (nb_sectors >> 48) & 0xff;
1786 outbuf[2] = (nb_sectors >> 40) & 0xff;
1787 outbuf[3] = (nb_sectors >> 32) & 0xff;
1788 outbuf[4] = (nb_sectors >> 24) & 0xff;
1789 outbuf[5] = (nb_sectors >> 16) & 0xff;
1790 outbuf[6] = (nb_sectors >> 8) & 0xff;
1791 outbuf[7] = nb_sectors & 0xff;
1792 outbuf[8] = 0;
1793 outbuf[9] = 0;
1794 outbuf[10] = s->qdev.blocksize >> 8;
1795 outbuf[11] = 0;
1796 outbuf[12] = 0;
1797 outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1798
1799 /* set TPE bit if the format supports discard */
1800 if (s->qdev.conf.discard_granularity) {
1801 outbuf[14] = 0x80;
1802 }
1803
1804 /* Protection, exponent and lowest lba field left blank. */
1805 break;
1806 }
1807 DPRINTF("Unsupported Service Action In\n");
1808 goto illegal_request;
1809 case SYNCHRONIZE_CACHE:
1810 /* The request is used as the AIO opaque value, so add a ref. */
1811 scsi_req_ref(&r->req);
1812 bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
1813 r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
1814 return 0;
1815 case SEEK_10:
1816 DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
1817 if (r->req.cmd.lba > s->qdev.max_lba) {
1818 goto illegal_lba;
1819 }
1820 break;
1821 case MODE_SELECT:
1822 DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1823 break;
1824 case MODE_SELECT_10:
1825 DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1826 break;
1827 case UNMAP:
1828 DPRINTF("Unmap (len %lu)\n", (long)r->req.cmd.xfer);
1829 break;
1830 case WRITE_SAME_10:
1831 case WRITE_SAME_16:
1832 nb_sectors = scsi_data_cdb_length(r->req.cmd.buf);
1833 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1834 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
1835 return 0;
1836 }
1837 if (!check_lba_range(s, r->req.cmd.lba, nb_sectors)) {
1838 goto illegal_lba;
1839 }
1840
1841 /*
1842 * We only support WRITE SAME with the unmap bit set for now.
1843 */
1844 if (!(req->cmd.buf[1] & 0x8)) {
1845 goto illegal_request;
1846 }
1847
1848 /* The request is used as the AIO opaque value, so add a ref. */
1849 scsi_req_ref(&r->req);
1850 r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
1851 r->req.cmd.lba * (s->qdev.blocksize / 512),
1852 nb_sectors * (s->qdev.blocksize / 512),
1853 scsi_aio_complete, r);
1854 return 0;
1855 default:
1856 DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1857 scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1858 return 0;
1859 }
1860 assert(!r->req.aiocb);
1861 r->iov.iov_len = MIN(r->buflen, req->cmd.xfer);
1862 if (r->iov.iov_len == 0) {
1863 scsi_req_complete(&r->req, GOOD);
1864 }
1865 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
1866 assert(r->iov.iov_len == req->cmd.xfer);
1867 return -r->iov.iov_len;
1868 } else {
1869 return r->iov.iov_len;
1870 }
1871
1872 illegal_request:
1873 if (r->req.status == -1) {
1874 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1875 }
1876 return 0;
1877
1878 illegal_lba:
1879 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1880 return 0;
1881 }
1882
1883 /* Execute a scsi command. Returns the length of the data expected by the
1884 command. This will be Positive for data transfers from the device
1885 (eg. disk reads), negative for transfers to the device (eg. disk writes),
1886 and zero if the command does not transfer any data. */
1887
1888 static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
1889 {
1890 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
1891 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
1892 uint32_t len;
1893 uint8_t command;
1894
1895 command = buf[0];
1896
1897 if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1898 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1899 return 0;
1900 }
1901
1902 len = scsi_data_cdb_length(r->req.cmd.buf);
1903 switch (command) {
1904 case READ_6:
1905 case READ_10:
1906 case READ_12:
1907 case READ_16:
1908 DPRINTF("Read (sector %" PRId64 ", count %u)\n", r->req.cmd.lba, len);
1909 if (r->req.cmd.buf[1] & 0xe0) {
1910 goto illegal_request;
1911 }
1912 if (!check_lba_range(s, r->req.cmd.lba, len)) {
1913 goto illegal_lba;
1914 }
1915 r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
1916 r->sector_count = len * (s->qdev.blocksize / 512);
1917 break;
1918 case WRITE_6:
1919 case WRITE_10:
1920 case WRITE_12:
1921 case WRITE_16:
1922 case WRITE_VERIFY_10:
1923 case WRITE_VERIFY_12:
1924 case WRITE_VERIFY_16:
1925 if (bdrv_is_read_only(s->qdev.conf.bs)) {
1926 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
1927 return 0;
1928 }
1929 /* fallthrough */
1930 case VERIFY_10:
1931 case VERIFY_12:
1932 case VERIFY_16:
1933 DPRINTF("Write %s(sector %" PRId64 ", count %u)\n",
1934 (command & 0xe) == 0xe ? "And Verify " : "",
1935 r->req.cmd.lba, len);
1936 if (r->req.cmd.buf[1] & 0xe0) {
1937 goto illegal_request;
1938 }
1939 if (!check_lba_range(s, r->req.cmd.lba, len)) {
1940 goto illegal_lba;
1941 }
1942 r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
1943 r->sector_count = len * (s->qdev.blocksize / 512);
1944 break;
1945 default:
1946 abort();
1947 illegal_request:
1948 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1949 return 0;
1950 illegal_lba:
1951 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1952 return 0;
1953 }
1954 if (r->sector_count == 0) {
1955 scsi_req_complete(&r->req, GOOD);
1956 }
1957 assert(r->iov.iov_len == 0);
1958 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
1959 return -r->sector_count * 512;
1960 } else {
1961 return r->sector_count * 512;
1962 }
1963 }
1964
1965 static void scsi_disk_reset(DeviceState *dev)
1966 {
1967 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
1968 uint64_t nb_sectors;
1969
1970 scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
1971
1972 bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1973 nb_sectors /= s->qdev.blocksize / 512;
1974 if (nb_sectors) {
1975 nb_sectors--;
1976 }
1977 s->qdev.max_lba = nb_sectors;
1978 }
1979
1980 static void scsi_destroy(SCSIDevice *dev)
1981 {
1982 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1983
1984 scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1985 blockdev_mark_auto_del(s->qdev.conf.bs);
1986 }
1987
1988 static void scsi_disk_resize_cb(void *opaque)
1989 {
1990 SCSIDiskState *s = opaque;
1991
1992 /* SPC lists this sense code as available only for
1993 * direct-access devices.
1994 */
1995 if (s->qdev.type == TYPE_DISK) {
1996 scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
1997 }
1998 }
1999
2000 static void scsi_cd_change_media_cb(void *opaque, bool load)
2001 {
2002 SCSIDiskState *s = opaque;
2003
2004 /*
2005 * When a CD gets changed, we have to report an ejected state and
2006 * then a loaded state to guests so that they detect tray
2007 * open/close and media change events. Guests that do not use
2008 * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
2009 * states rely on this behavior.
2010 *
2011 * media_changed governs the state machine used for unit attention
2012 * report. media_event is used by GET EVENT STATUS NOTIFICATION.
2013 */
2014 s->media_changed = load;
2015 s->tray_open = !load;
2016 scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM));
2017 s->media_event = true;
2018 s->eject_request = false;
2019 }
2020
2021 static void scsi_cd_eject_request_cb(void *opaque, bool force)
2022 {
2023 SCSIDiskState *s = opaque;
2024
2025 s->eject_request = true;
2026 if (force) {
2027 s->tray_locked = false;
2028 }
2029 }
2030
2031 static bool scsi_cd_is_tray_open(void *opaque)
2032 {
2033 return ((SCSIDiskState *)opaque)->tray_open;
2034 }
2035
2036 static bool scsi_cd_is_medium_locked(void *opaque)
2037 {
2038 return ((SCSIDiskState *)opaque)->tray_locked;
2039 }
2040
2041 static const BlockDevOps scsi_disk_removable_block_ops = {
2042 .change_media_cb = scsi_cd_change_media_cb,
2043 .eject_request_cb = scsi_cd_eject_request_cb,
2044 .is_tray_open = scsi_cd_is_tray_open,
2045 .is_medium_locked = scsi_cd_is_medium_locked,
2046
2047 .resize_cb = scsi_disk_resize_cb,
2048 };
2049
2050 static const BlockDevOps scsi_disk_block_ops = {
2051 .resize_cb = scsi_disk_resize_cb,
2052 };
2053
2054 static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
2055 {
2056 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2057 if (s->media_changed) {
2058 s->media_changed = false;
2059 scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED));
2060 }
2061 }
2062
2063 static int scsi_initfn(SCSIDevice *dev)
2064 {
2065 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2066
2067 if (!s->qdev.conf.bs) {
2068 error_report("drive property not set");
2069 return -1;
2070 }
2071
2072 if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
2073 !bdrv_is_inserted(s->qdev.conf.bs)) {
2074 error_report("Device needs media, but drive is empty");
2075 return -1;
2076 }
2077
2078 blkconf_serial(&s->qdev.conf, &s->serial);
2079 if (dev->type == TYPE_DISK
2080 && blkconf_geometry(&dev->conf, NULL, 65535, 255, 255) < 0) {
2081 return -1;
2082 }
2083
2084 if (s->qdev.conf.discard_granularity == -1) {
2085 s->qdev.conf.discard_granularity =
2086 MAX(s->qdev.conf.logical_block_size, DEFAULT_DISCARD_GRANULARITY);
2087 }
2088
2089 if (!s->version) {
2090 s->version = g_strdup(qemu_get_version());
2091 }
2092 if (!s->vendor) {
2093 s->vendor = g_strdup("QEMU");
2094 }
2095
2096 if (bdrv_is_sg(s->qdev.conf.bs)) {
2097 error_report("unwanted /dev/sg*");
2098 return -1;
2099 }
2100
2101 if (s->features & (1 << SCSI_DISK_F_REMOVABLE)) {
2102 bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_removable_block_ops, s);
2103 } else {
2104 bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_block_ops, s);
2105 }
2106 bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
2107
2108 bdrv_iostatus_enable(s->qdev.conf.bs);
2109 add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
2110 return 0;
2111 }
2112
2113 static int scsi_hd_initfn(SCSIDevice *dev)
2114 {
2115 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2116 s->qdev.blocksize = s->qdev.conf.logical_block_size;
2117 s->qdev.type = TYPE_DISK;
2118 if (!s->product) {
2119 s->product = g_strdup("QEMU HARDDISK");
2120 }
2121 return scsi_initfn(&s->qdev);
2122 }
2123
2124 static int scsi_cd_initfn(SCSIDevice *dev)
2125 {
2126 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2127 s->qdev.blocksize = 2048;
2128 s->qdev.type = TYPE_ROM;
2129 s->features |= 1 << SCSI_DISK_F_REMOVABLE;
2130 if (!s->product) {
2131 s->product = g_strdup("QEMU CD-ROM");
2132 }
2133 return scsi_initfn(&s->qdev);
2134 }
2135
2136 static int scsi_disk_initfn(SCSIDevice *dev)
2137 {
2138 DriveInfo *dinfo;
2139
2140 if (!dev->conf.bs) {
2141 return scsi_initfn(dev); /* ... and die there */
2142 }
2143
2144 dinfo = drive_get_by_blockdev(dev->conf.bs);
2145 if (dinfo->media_cd) {
2146 return scsi_cd_initfn(dev);
2147 } else {
2148 return scsi_hd_initfn(dev);
2149 }
2150 }
2151
2152 static const SCSIReqOps scsi_disk_emulate_reqops = {
2153 .size = sizeof(SCSIDiskReq),
2154 .free_req = scsi_free_request,
2155 .send_command = scsi_disk_emulate_command,
2156 .read_data = scsi_disk_emulate_read_data,
2157 .write_data = scsi_disk_emulate_write_data,
2158 .get_buf = scsi_get_buf,
2159 };
2160
2161 static const SCSIReqOps scsi_disk_dma_reqops = {
2162 .size = sizeof(SCSIDiskReq),
2163 .free_req = scsi_free_request,
2164 .send_command = scsi_disk_dma_command,
2165 .read_data = scsi_read_data,
2166 .write_data = scsi_write_data,
2167 .cancel_io = scsi_cancel_io,
2168 .get_buf = scsi_get_buf,
2169 .load_request = scsi_disk_load_request,
2170 .save_request = scsi_disk_save_request,
2171 };
2172
2173 static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = {
2174 [TEST_UNIT_READY] = &scsi_disk_emulate_reqops,
2175 [INQUIRY] = &scsi_disk_emulate_reqops,
2176 [MODE_SENSE] = &scsi_disk_emulate_reqops,
2177 [MODE_SENSE_10] = &scsi_disk_emulate_reqops,
2178 [START_STOP] = &scsi_disk_emulate_reqops,
2179 [ALLOW_MEDIUM_REMOVAL] = &scsi_disk_emulate_reqops,
2180 [READ_CAPACITY_10] = &scsi_disk_emulate_reqops,
2181 [READ_TOC] = &scsi_disk_emulate_reqops,
2182 [READ_DVD_STRUCTURE] = &scsi_disk_emulate_reqops,
2183 [READ_DISC_INFORMATION] = &scsi_disk_emulate_reqops,
2184 [GET_CONFIGURATION] = &scsi_disk_emulate_reqops,
2185 [GET_EVENT_STATUS_NOTIFICATION] = &scsi_disk_emulate_reqops,
2186 [MECHANISM_STATUS] = &scsi_disk_emulate_reqops,
2187 [SERVICE_ACTION_IN_16] = &scsi_disk_emulate_reqops,
2188 [REQUEST_SENSE] = &scsi_disk_emulate_reqops,
2189 [SYNCHRONIZE_CACHE] = &scsi_disk_emulate_reqops,
2190 [SEEK_10] = &scsi_disk_emulate_reqops,
2191 [MODE_SELECT] = &scsi_disk_emulate_reqops,
2192 [MODE_SELECT_10] = &scsi_disk_emulate_reqops,
2193 [UNMAP] = &scsi_disk_emulate_reqops,
2194 [WRITE_SAME_10] = &scsi_disk_emulate_reqops,
2195 [WRITE_SAME_16] = &scsi_disk_emulate_reqops,
2196
2197 [READ_6] = &scsi_disk_dma_reqops,
2198 [READ_10] = &scsi_disk_dma_reqops,
2199 [READ_12] = &scsi_disk_dma_reqops,
2200 [READ_16] = &scsi_disk_dma_reqops,
2201 [VERIFY_10] = &scsi_disk_dma_reqops,
2202 [VERIFY_12] = &scsi_disk_dma_reqops,
2203 [VERIFY_16] = &scsi_disk_dma_reqops,
2204 [WRITE_6] = &scsi_disk_dma_reqops,
2205 [WRITE_10] = &scsi_disk_dma_reqops,
2206 [WRITE_12] = &scsi_disk_dma_reqops,
2207 [WRITE_16] = &scsi_disk_dma_reqops,
2208 [WRITE_VERIFY_10] = &scsi_disk_dma_reqops,
2209 [WRITE_VERIFY_12] = &scsi_disk_dma_reqops,
2210 [WRITE_VERIFY_16] = &scsi_disk_dma_reqops,
2211 };
2212
2213 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
2214 uint8_t *buf, void *hba_private)
2215 {
2216 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
2217 SCSIRequest *req;
2218 const SCSIReqOps *ops;
2219 uint8_t command;
2220
2221 command = buf[0];
2222 ops = scsi_disk_reqops_dispatch[command];
2223 if (!ops) {
2224 ops = &scsi_disk_emulate_reqops;
2225 }
2226 req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private);
2227
2228 #ifdef DEBUG_SCSI
2229 DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
2230 {
2231 int i;
2232 for (i = 1; i < req->cmd.len; i++) {
2233 printf(" 0x%02x", buf[i]);
2234 }
2235 printf("\n");
2236 }
2237 #endif
2238
2239 return req;
2240 }
2241
2242 #ifdef __linux__
2243 static int get_device_type(SCSIDiskState *s)
2244 {
2245 BlockDriverState *bdrv = s->qdev.conf.bs;
2246 uint8_t cmd[16];
2247 uint8_t buf[36];
2248 uint8_t sensebuf[8];
2249 sg_io_hdr_t io_header;
2250 int ret;
2251
2252 memset(cmd, 0, sizeof(cmd));
2253 memset(buf, 0, sizeof(buf));
2254 cmd[0] = INQUIRY;
2255 cmd[4] = sizeof(buf);
2256
2257 memset(&io_header, 0, sizeof(io_header));
2258 io_header.interface_id = 'S';
2259 io_header.dxfer_direction = SG_DXFER_FROM_DEV;
2260 io_header.dxfer_len = sizeof(buf);
2261 io_header.dxferp = buf;
2262 io_header.cmdp = cmd;
2263 io_header.cmd_len = sizeof(cmd);
2264 io_header.mx_sb_len = sizeof(sensebuf);
2265 io_header.sbp = sensebuf;
2266 io_header.timeout = 6000; /* XXX */
2267
2268 ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
2269 if (ret < 0 || io_header.driver_status || io_header.host_status) {
2270 return -1;
2271 }
2272 s->qdev.type = buf[0];
2273 if (buf[1] & 0x80) {
2274 s->features |= 1 << SCSI_DISK_F_REMOVABLE;
2275 }
2276 return 0;
2277 }
2278
2279 static int scsi_block_initfn(SCSIDevice *dev)
2280 {
2281 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
2282 int sg_version;
2283 int rc;
2284
2285 if (!s->qdev.conf.bs) {
2286 error_report("scsi-block: drive property not set");
2287 return -1;
2288 }
2289
2290 /* check we are using a driver managing SG_IO (version 3 and after) */
2291 if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
2292 sg_version < 30000) {
2293 error_report("scsi-block: scsi generic interface too old");
2294 return -1;
2295 }
2296
2297 /* get device type from INQUIRY data */
2298 rc = get_device_type(s);
2299 if (rc < 0) {
2300 error_report("scsi-block: INQUIRY failed");
2301 return -1;
2302 }
2303
2304 /* Make a guess for the block size, we'll fix it when the guest sends.
2305 * READ CAPACITY. If they don't, they likely would assume these sizes
2306 * anyway. (TODO: check in /sys).
2307 */
2308 if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
2309 s->qdev.blocksize = 2048;
2310 } else {
2311 s->qdev.blocksize = 512;
2312 }
2313 return scsi_initfn(&s->qdev);
2314 }
2315
2316 static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
2317 uint32_t lun, uint8_t *buf,
2318 void *hba_private)
2319 {
2320 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
2321
2322 switch (buf[0]) {
2323 case READ_6:
2324 case READ_10:
2325 case READ_12:
2326 case READ_16:
2327 case VERIFY_10:
2328 case VERIFY_12:
2329 case VERIFY_16:
2330 case WRITE_6:
2331 case WRITE_10:
2332 case WRITE_12:
2333 case WRITE_16:
2334 case WRITE_VERIFY_10:
2335 case WRITE_VERIFY_12:
2336 case WRITE_VERIFY_16:
2337 /* If we are not using O_DIRECT, we might read stale data from the
2338 * host cache if writes were made using other commands than these
2339 * ones (such as WRITE SAME or EXTENDED COPY, etc.). So, without
2340 * O_DIRECT everything must go through SG_IO.
2341 */
2342 if (bdrv_get_flags(s->qdev.conf.bs) & BDRV_O_NOCACHE) {
2343 break;
2344 }
2345
2346 /* MMC writing cannot be done via pread/pwrite, because it sometimes
2347 * involves writing beyond the maximum LBA or to negative LBA (lead-in).
2348 * And once you do these writes, reading from the block device is
2349 * unreliable, too. It is even possible that reads deliver random data
2350 * from the host page cache (this is probably a Linux bug).
2351 *
2352 * We might use scsi_disk_dma_reqops as long as no writing commands are
2353 * seen, but performance usually isn't paramount on optical media. So,
2354 * just make scsi-block operate the same as scsi-generic for them.
2355 */
2356 if (s->qdev.type != TYPE_ROM) {
2357 return scsi_req_alloc(&scsi_disk_dma_reqops, &s->qdev, tag, lun,
2358 hba_private);
2359 }
2360 }
2361
2362 return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
2363 hba_private);
2364 }
2365 #endif
2366
2367 #define DEFINE_SCSI_DISK_PROPERTIES() \
2368 DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf), \
2369 DEFINE_PROP_STRING("ver", SCSIDiskState, version), \
2370 DEFINE_PROP_STRING("serial", SCSIDiskState, serial), \
2371 DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor), \
2372 DEFINE_PROP_STRING("product", SCSIDiskState, product)
2373
2374 static Property scsi_hd_properties[] = {
2375 DEFINE_SCSI_DISK_PROPERTIES(),
2376 DEFINE_PROP_BIT("removable", SCSIDiskState, features,
2377 SCSI_DISK_F_REMOVABLE, false),
2378 DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
2379 SCSI_DISK_F_DPOFUA, false),
2380 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2381 DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf),
2382 DEFINE_PROP_END_OF_LIST(),
2383 };
2384
2385 static const VMStateDescription vmstate_scsi_disk_state = {
2386 .name = "scsi-disk",
2387 .version_id = 1,
2388 .minimum_version_id = 1,
2389 .minimum_version_id_old = 1,
2390 .fields = (VMStateField[]) {
2391 VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState),
2392 VMSTATE_BOOL(media_changed, SCSIDiskState),
2393 VMSTATE_BOOL(media_event, SCSIDiskState),
2394 VMSTATE_BOOL(eject_request, SCSIDiskState),
2395 VMSTATE_BOOL(tray_open, SCSIDiskState),
2396 VMSTATE_BOOL(tray_locked, SCSIDiskState),
2397 VMSTATE_END_OF_LIST()
2398 }
2399 };
2400
2401 static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
2402 {
2403 DeviceClass *dc = DEVICE_CLASS(klass);
2404 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2405
2406 sc->init = scsi_hd_initfn;
2407 sc->destroy = scsi_destroy;
2408 sc->alloc_req = scsi_new_request;
2409 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2410 dc->fw_name = "disk";
2411 dc->desc = "virtual SCSI disk";
2412 dc->reset = scsi_disk_reset;
2413 dc->props = scsi_hd_properties;
2414 dc->vmsd = &vmstate_scsi_disk_state;
2415 }
2416
2417 static const TypeInfo scsi_hd_info = {
2418 .name = "scsi-hd",
2419 .parent = TYPE_SCSI_DEVICE,
2420 .instance_size = sizeof(SCSIDiskState),
2421 .class_init = scsi_hd_class_initfn,
2422 };
2423
2424 static Property scsi_cd_properties[] = {
2425 DEFINE_SCSI_DISK_PROPERTIES(),
2426 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2427 DEFINE_PROP_END_OF_LIST(),
2428 };
2429
2430 static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
2431 {
2432 DeviceClass *dc = DEVICE_CLASS(klass);
2433 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2434
2435 sc->init = scsi_cd_initfn;
2436 sc->destroy = scsi_destroy;
2437 sc->alloc_req = scsi_new_request;
2438 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2439 dc->fw_name = "disk";
2440 dc->desc = "virtual SCSI CD-ROM";
2441 dc->reset = scsi_disk_reset;
2442 dc->props = scsi_cd_properties;
2443 dc->vmsd = &vmstate_scsi_disk_state;
2444 }
2445
2446 static const TypeInfo scsi_cd_info = {
2447 .name = "scsi-cd",
2448 .parent = TYPE_SCSI_DEVICE,
2449 .instance_size = sizeof(SCSIDiskState),
2450 .class_init = scsi_cd_class_initfn,
2451 };
2452
2453 #ifdef __linux__
2454 static Property scsi_block_properties[] = {
2455 DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.bs),
2456 DEFINE_PROP_INT32("bootindex", SCSIDiskState, qdev.conf.bootindex, -1),
2457 DEFINE_PROP_END_OF_LIST(),
2458 };
2459
2460 static void scsi_block_class_initfn(ObjectClass *klass, void *data)
2461 {
2462 DeviceClass *dc = DEVICE_CLASS(klass);
2463 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2464
2465 sc->init = scsi_block_initfn;
2466 sc->destroy = scsi_destroy;
2467 sc->alloc_req = scsi_block_new_request;
2468 dc->fw_name = "disk";
2469 dc->desc = "SCSI block device passthrough";
2470 dc->reset = scsi_disk_reset;
2471 dc->props = scsi_block_properties;
2472 dc->vmsd = &vmstate_scsi_disk_state;
2473 }
2474
2475 static const TypeInfo scsi_block_info = {
2476 .name = "scsi-block",
2477 .parent = TYPE_SCSI_DEVICE,
2478 .instance_size = sizeof(SCSIDiskState),
2479 .class_init = scsi_block_class_initfn,
2480 };
2481 #endif
2482
2483 static Property scsi_disk_properties[] = {
2484 DEFINE_SCSI_DISK_PROPERTIES(),
2485 DEFINE_PROP_BIT("removable", SCSIDiskState, features,
2486 SCSI_DISK_F_REMOVABLE, false),
2487 DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
2488 SCSI_DISK_F_DPOFUA, false),
2489 DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
2490 DEFINE_PROP_END_OF_LIST(),
2491 };
2492
2493 static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
2494 {
2495 DeviceClass *dc = DEVICE_CLASS(klass);
2496 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
2497
2498 sc->init = scsi_disk_initfn;
2499 sc->destroy = scsi_destroy;
2500 sc->alloc_req = scsi_new_request;
2501 sc->unit_attention_reported = scsi_disk_unit_attention_reported;
2502 dc->fw_name = "disk";
2503 dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
2504 dc->reset = scsi_disk_reset;
2505 dc->props = scsi_disk_properties;
2506 dc->vmsd = &vmstate_scsi_disk_state;
2507 }
2508
2509 static const TypeInfo scsi_disk_info = {
2510 .name = "scsi-disk",
2511 .parent = TYPE_SCSI_DEVICE,
2512 .instance_size = sizeof(SCSIDiskState),
2513 .class_init = scsi_disk_class_initfn,
2514 };
2515
2516 static void scsi_disk_register_types(void)
2517 {
2518 type_register_static(&scsi_hd_info);
2519 type_register_static(&scsi_cd_info);
2520 #ifdef __linux__
2521 type_register_static(&scsi_block_info);
2522 #endif
2523 type_register_static(&scsi_disk_info);
2524 }
2525
2526 type_init(scsi_disk_register_types)