]> git.proxmox.com Git - qemu.git/blob - osdep.c
target-i386: Enable SSSE3 TCG support
[qemu.git] / osdep.c
1 /*
2 * QEMU low level functions
3 *
4 * Copyright (c) 2003 Fabrice Bellard
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24 #include <stdlib.h>
25 #include <stdio.h>
26 #include <stdarg.h>
27 #include <stdbool.h>
28 #include <string.h>
29 #include <errno.h>
30 #include <unistd.h>
31 #include <fcntl.h>
32
33 /* Needed early for CONFIG_BSD etc. */
34 #include "config-host.h"
35
36 #if defined(CONFIG_MADVISE) || defined(CONFIG_POSIX_MADVISE)
37 #include <sys/mman.h>
38 #endif
39
40 #ifdef CONFIG_SOLARIS
41 #include <sys/types.h>
42 #include <sys/statvfs.h>
43 /* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for
44 discussion about Solaris header problems */
45 extern int madvise(caddr_t, size_t, int);
46 #endif
47
48 #include "qemu-common.h"
49 #include "trace.h"
50 #include "qemu_socket.h"
51 #include "monitor.h"
52
53 static bool fips_enabled = false;
54
55 static const char *qemu_version = QEMU_VERSION;
56
57 int socket_set_cork(int fd, int v)
58 {
59 #if defined(SOL_TCP) && defined(TCP_CORK)
60 return setsockopt(fd, SOL_TCP, TCP_CORK, &v, sizeof(v));
61 #else
62 return 0;
63 #endif
64 }
65
66 int qemu_madvise(void *addr, size_t len, int advice)
67 {
68 if (advice == QEMU_MADV_INVALID) {
69 errno = EINVAL;
70 return -1;
71 }
72 #if defined(CONFIG_MADVISE)
73 return madvise(addr, len, advice);
74 #elif defined(CONFIG_POSIX_MADVISE)
75 return posix_madvise(addr, len, advice);
76 #else
77 errno = EINVAL;
78 return -1;
79 #endif
80 }
81
82 #ifndef _WIN32
83 /*
84 * Dups an fd and sets the flags
85 */
86 static int qemu_dup_flags(int fd, int flags)
87 {
88 int ret;
89 int serrno;
90 int dup_flags;
91
92 #ifdef F_DUPFD_CLOEXEC
93 ret = fcntl(fd, F_DUPFD_CLOEXEC, 0);
94 #else
95 ret = dup(fd);
96 if (ret != -1) {
97 qemu_set_cloexec(ret);
98 }
99 #endif
100 if (ret == -1) {
101 goto fail;
102 }
103
104 dup_flags = fcntl(ret, F_GETFL);
105 if (dup_flags == -1) {
106 goto fail;
107 }
108
109 if ((flags & O_SYNC) != (dup_flags & O_SYNC)) {
110 errno = EINVAL;
111 goto fail;
112 }
113
114 /* Set/unset flags that we can with fcntl */
115 if (fcntl(ret, F_SETFL, flags) == -1) {
116 goto fail;
117 }
118
119 /* Truncate the file in the cases that open() would truncate it */
120 if (flags & O_TRUNC ||
121 ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) {
122 if (ftruncate(ret, 0) == -1) {
123 goto fail;
124 }
125 }
126
127 return ret;
128
129 fail:
130 serrno = errno;
131 if (ret != -1) {
132 close(ret);
133 }
134 errno = serrno;
135 return -1;
136 }
137
138 static int qemu_parse_fdset(const char *param)
139 {
140 return qemu_parse_fd(param);
141 }
142 #endif
143
144 /*
145 * Opens a file with FD_CLOEXEC set
146 */
147 int qemu_open(const char *name, int flags, ...)
148 {
149 int ret;
150 int mode = 0;
151
152 #ifndef _WIN32
153 const char *fdset_id_str;
154
155 /* Attempt dup of fd from fd set */
156 if (strstart(name, "/dev/fdset/", &fdset_id_str)) {
157 int64_t fdset_id;
158 int fd, dupfd;
159
160 fdset_id = qemu_parse_fdset(fdset_id_str);
161 if (fdset_id == -1) {
162 errno = EINVAL;
163 return -1;
164 }
165
166 fd = monitor_fdset_get_fd(fdset_id, flags);
167 if (fd == -1) {
168 return -1;
169 }
170
171 dupfd = qemu_dup_flags(fd, flags);
172 if (dupfd == -1) {
173 return -1;
174 }
175
176 ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
177 if (ret == -1) {
178 close(dupfd);
179 errno = EINVAL;
180 return -1;
181 }
182
183 return dupfd;
184 }
185 #endif
186
187 if (flags & O_CREAT) {
188 va_list ap;
189
190 va_start(ap, flags);
191 mode = va_arg(ap, int);
192 va_end(ap);
193 }
194
195 #ifdef O_CLOEXEC
196 ret = open(name, flags | O_CLOEXEC, mode);
197 #else
198 ret = open(name, flags, mode);
199 if (ret >= 0) {
200 qemu_set_cloexec(ret);
201 }
202 #endif
203
204 return ret;
205 }
206
207 int qemu_close(int fd)
208 {
209 int64_t fdset_id;
210
211 /* Close fd that was dup'd from an fdset */
212 fdset_id = monitor_fdset_dup_fd_find(fd);
213 if (fdset_id != -1) {
214 int ret;
215
216 ret = close(fd);
217 if (ret == 0) {
218 monitor_fdset_dup_fd_remove(fd);
219 }
220
221 return ret;
222 }
223
224 return close(fd);
225 }
226
227 /*
228 * A variant of write(2) which handles partial write.
229 *
230 * Return the number of bytes transferred.
231 * Set errno if fewer than `count' bytes are written.
232 *
233 * This function don't work with non-blocking fd's.
234 * Any of the possibilities with non-bloking fd's is bad:
235 * - return a short write (then name is wrong)
236 * - busy wait adding (errno == EAGAIN) to the loop
237 */
238 ssize_t qemu_write_full(int fd, const void *buf, size_t count)
239 {
240 ssize_t ret = 0;
241 ssize_t total = 0;
242
243 while (count) {
244 ret = write(fd, buf, count);
245 if (ret < 0) {
246 if (errno == EINTR)
247 continue;
248 break;
249 }
250
251 count -= ret;
252 buf += ret;
253 total += ret;
254 }
255
256 return total;
257 }
258
259 /*
260 * Opens a socket with FD_CLOEXEC set
261 */
262 int qemu_socket(int domain, int type, int protocol)
263 {
264 int ret;
265
266 #ifdef SOCK_CLOEXEC
267 ret = socket(domain, type | SOCK_CLOEXEC, protocol);
268 if (ret != -1 || errno != EINVAL) {
269 return ret;
270 }
271 #endif
272 ret = socket(domain, type, protocol);
273 if (ret >= 0) {
274 qemu_set_cloexec(ret);
275 }
276
277 return ret;
278 }
279
280 /*
281 * Accept a connection and set FD_CLOEXEC
282 */
283 int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen)
284 {
285 int ret;
286
287 #ifdef CONFIG_ACCEPT4
288 ret = accept4(s, addr, addrlen, SOCK_CLOEXEC);
289 if (ret != -1 || errno != ENOSYS) {
290 return ret;
291 }
292 #endif
293 ret = accept(s, addr, addrlen);
294 if (ret >= 0) {
295 qemu_set_cloexec(ret);
296 }
297
298 return ret;
299 }
300
301 /*
302 * A variant of send(2) which handles partial write.
303 *
304 * Return the number of bytes transferred, which is only
305 * smaller than `count' if there is an error.
306 *
307 * This function won't work with non-blocking fd's.
308 * Any of the possibilities with non-bloking fd's is bad:
309 * - return a short write (then name is wrong)
310 * - busy wait adding (errno == EAGAIN) to the loop
311 */
312 ssize_t qemu_send_full(int fd, const void *buf, size_t count, int flags)
313 {
314 ssize_t ret = 0;
315 ssize_t total = 0;
316
317 while (count) {
318 ret = send(fd, buf, count, flags);
319 if (ret < 0) {
320 if (errno == EINTR) {
321 continue;
322 }
323 break;
324 }
325
326 count -= ret;
327 buf += ret;
328 total += ret;
329 }
330
331 return total;
332 }
333
334 /*
335 * A variant of recv(2) which handles partial write.
336 *
337 * Return the number of bytes transferred, which is only
338 * smaller than `count' if there is an error.
339 *
340 * This function won't work with non-blocking fd's.
341 * Any of the possibilities with non-bloking fd's is bad:
342 * - return a short write (then name is wrong)
343 * - busy wait adding (errno == EAGAIN) to the loop
344 */
345 ssize_t qemu_recv_full(int fd, void *buf, size_t count, int flags)
346 {
347 ssize_t ret = 0;
348 ssize_t total = 0;
349
350 while (count) {
351 ret = qemu_recv(fd, buf, count, flags);
352 if (ret <= 0) {
353 if (ret < 0 && errno == EINTR) {
354 continue;
355 }
356 break;
357 }
358
359 count -= ret;
360 buf += ret;
361 total += ret;
362 }
363
364 return total;
365 }
366
367 void qemu_set_version(const char *version)
368 {
369 qemu_version = version;
370 }
371
372 const char *qemu_get_version(void)
373 {
374 return qemu_version;
375 }
376
377 void fips_set_state(bool requested)
378 {
379 #ifdef __linux__
380 if (requested) {
381 FILE *fds = fopen("/proc/sys/crypto/fips_enabled", "r");
382 if (fds != NULL) {
383 fips_enabled = (fgetc(fds) == '1');
384 fclose(fds);
385 }
386 }
387 #else
388 fips_enabled = false;
389 #endif /* __linux__ */
390
391 #ifdef _FIPS_DEBUG
392 fprintf(stderr, "FIPS mode %s (requested %s)\n",
393 (fips_enabled ? "enabled" : "disabled"),
394 (requested ? "enabled" : "disabled"));
395 #endif
396 }
397
398 bool fips_get_state(void)
399 {
400 return fips_enabled;
401 }
402