Malta flash support.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3887 c046a42c-6fe2-441c-8c8c-71466251a162

diff --git a/Makefile.target b/Makefile.target
index 629f09da9a7f7e1536357b5513b8f3b14fd75435..cc8facb7eae5e24b29fa8420ef3652576eb16f2b 100644 (file)
--- a/Makefile.target
+++ b/Makefile.target
@@ -470,6 +470,7 @@ VL_OBJS+= jazz_led.o
 VL_OBJS+= ide.o gt64xxx.o pckbd.o ps2.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
 VL_OBJS+= piix_pci.o parallel.o cirrus_vga.o $(SOUND_HW)
 VL_OBJS+= mipsnet.o
+VL_OBJS+= pflash_cfi01.o
 CPPFLAGS += -DHAS_AUDIO
 endif
 ifeq ($(TARGET_BASE_ARCH), cris)

diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index 6af5e52dc4640170d0a9bfc2444482972d379f66..1ab594098e75c7593c9400800c4859195f972aac 100644 (file)
--- a/hw/mips_malta.c
+++ b/hw/mips_malta.c
@@ -28,6 +28,8 @@
 #include "net.h"
 #include "boards.h"
 #include "smbus.h"
+#include "block.h"
+#include "flash.h"
 #include "mips.h"
 #include "pci.h"
 #include "qemu-char.h"
@@ -35,6 +37,8 @@
 #include "audio/audio.h"
 #include "boards.h"
 
+//#define DEBUG_BOARD_INIT
+
 #ifdef TARGET_WORDS_BIGENDIAN
 #define BIOS_FILENAME "mips_bios.bin"
 #else
@@ -766,13 +770,13 @@ void mips_malta_init (int ram_size, int vga_ram_size,
 {
     char buf[1024];
     unsigned long bios_offset;
+    target_long bios_size;
     int64_t kernel_entry;
     PCIBus *pci_bus;
     CPUState *env;
     RTCState *rtc_state;
     fdctrl_t *floppy_controller;
     MaltaFPGAState *malta_fpga;
-    int ret;
     qemu_irq *i8259;
     int piix4_devfn;
     uint8_t *eeprom_buf;
@@ -781,6 +785,8 @@ void mips_malta_init (int ram_size, int vga_ram_size,
     int index;
     BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
     BlockDriverState *fd[MAX_FD];
+    int fl_idx = 0;
+    int fl_sectors = 0;
 
     /* init CPUs */
     if (cpu_model == NULL) {
@@ -801,7 +807,7 @@ void mips_malta_init (int ram_size, int vga_ram_size,
     /* allocate RAM */
     cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
 
-    /* Map the bios at two physical locations, as on the real board */
+    /* Map the bios at two physical locations, as on the real board. */
     bios_offset = ram_size + vga_ram_size;
     cpu_register_physical_memory(0x1e000000LL,
                                  BIOS_SIZE, bios_offset | IO_MEM_ROM);
@@ -811,17 +817,44 @@ void mips_malta_init (int ram_size, int vga_ram_size,
     /* FPGA */
     malta_fpga = malta_fpga_init(0x1f000000LL, env);
 
-    /* Load a BIOS image unless a kernel image has been specified. */
-    if (!kernel_filename) {
-        if (bios_name == NULL)
-            bios_name = BIOS_FILENAME;
-        snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
-        ret = load_image(buf, phys_ram_base + bios_offset);
-        if (ret < 0 || ret > BIOS_SIZE) {
-            fprintf(stderr,
-                    "qemu: Could not load MIPS bios '%s', and no -kernel argument was specified\n",
-                    buf);
-            exit(1);
+    /* Load firmware in flash / BIOS unless we boot directly into a kernel. */
+    if (kernel_filename) {
+        /* Write a small bootloader to the flash location. */
+        loaderparams.ram_size = ram_size;
+        loaderparams.kernel_filename = kernel_filename;
+        loaderparams.kernel_cmdline = kernel_cmdline;
+        loaderparams.initrd_filename = initrd_filename;
+        kernel_entry = load_kernel(env);
+        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
+        write_bootloader(env, bios_offset, kernel_entry);
+    } else {
+        index = drive_get_index(IF_PFLASH, 0, fl_idx);
+        if (index != -1) {
+            /* Load firmware from flash. */
+            bios_size = 0x400000;
+            fl_sectors = bios_size >> 16;
+#ifdef DEBUG_BOARD_INIT
+            printf("Register parallel flash %d size " TARGET_FMT_lx " at "
+                   "offset %08lx addr %08llx '%s' %x\n",
+                   fl_idx, bios_size, bios_offset, 0x1e000000LL,
+                   bdrv_get_device_name(drives_table[index].bdrv), fl_sectors);
+#endif
+            pflash_cfi01_register(0x1e000000LL, bios_offset,
+                                  drives_table[index].bdrv, 65536, fl_sectors,
+                                  4, 0x0000, 0x0000, 0x0000, 0x0000);
+            fl_idx++;
+        } else {
+            /* Load a BIOS image. */
+            if (bios_name == NULL)
+                bios_name = BIOS_FILENAME;
+            snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
+            bios_size = load_image(buf, phys_ram_base + bios_offset);
+            if ((bios_size < 0 || bios_size > BIOS_SIZE) && !kernel_filename) {
+                fprintf(stderr,
+                        "qemu: Could not load MIPS bios '%s', and no -kernel argument was specified\n",
+                        buf);
+                exit(1);
+            }
         }
         /* In little endian mode the 32bit words in the bios are swapped,
            a neat trick which allows bi-endian firmware. */
@@ -829,26 +862,14 @@ void mips_malta_init (int ram_size, int vga_ram_size,
         {
             uint32_t *addr;
             for (addr = (uint32_t *)(phys_ram_base + bios_offset);
-                 addr < (uint32_t *)(phys_ram_base + bios_offset + ret);
-                addr++) {
+                 addr < (uint32_t *)(phys_ram_base + bios_offset + bios_size);
+                 addr++) {
                 *addr = bswap32(*addr);
             }
         }
 #endif
     }
 
-    /* If a kernel image has been specified, write a small bootloader
-       to the flash location. */
-    if (kernel_filename) {
-        loaderparams.ram_size = ram_size;
-        loaderparams.kernel_filename = kernel_filename;
-        loaderparams.kernel_cmdline = kernel_cmdline;
-        loaderparams.initrd_filename = initrd_filename;
-        kernel_entry = load_kernel(env);
-        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
-        write_bootloader(env, bios_offset, kernel_entry);
-    }
-
     /* Board ID = 0x420 (Malta Board with CoreLV)
        XXX: theoretically 0x1e000010 should map to flash and 0x1fc00010 should
        map to the board ID. */

diff --git a/hw/pflash_cfi01.c b/hw/pflash_cfi01.c
index 745f5e57c5b05ef280109d336f0df16d7cc5c179..b3a8a8e3fba89bb57a52e9f5225d6db357cf016e 100644 (file)
--- a/hw/pflash_cfi01.c
+++ b/hw/pflash_cfi01.c
@@ -111,8 +111,8 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
     else if (pfl->width == 4)
         boff = boff >> 2;
 
-    DPRINTF("%s: reading offset %08x under cmd %02x\n",
-                    __func__, boff, pfl->cmd);
+    DPRINTF("%s: reading offset " TARGET_FMT_lx " under cmd %02x\n",
+            __func__, boff, pfl->cmd);
 
     switch (pfl->cmd) {
     case 0x00:
@@ -121,7 +121,8 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
         switch (width) {
         case 1:
             ret = p[offset];
-            DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
+            DPRINTF("%s: data offset " TARGET_FMT_lx " %02x\n",
+                    __func__, offset, ret);
             break;
         case 2:
 #if defined(TARGET_WORDS_BIGENDIAN)
@@ -131,7 +132,8 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
             ret = p[offset];
             ret |= p[offset + 1] << 8;
 #endif
-            DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
+            DPRINTF("%s: data offset " TARGET_FMT_lx " %04x\n",
+                    __func__, offset, ret);
             break;
         case 4:
 #if defined(TARGET_WORDS_BIGENDIAN)
@@ -146,7 +148,8 @@ static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
             ret |= p[offset + 2] << 16;
             ret |= p[offset + 3] << 24;
 #endif
-            DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
+            DPRINTF("%s: data offset " TARGET_FMT_lx " %08x\n",
+                    __func__, offset, ret);
             break;
         default:
             DPRINTF("BUG in %s\n", __func__);
@@ -208,8 +211,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
     else
         offset -= pfl->base;
 
-    DPRINTF("%s: offset %08x %08x %d wcycle 0x%x\n",
-                    __func__, offset, value, width, pfl->wcycle);
+    DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d wcycle 0x%x\n",
+            __func__, offset, value, width, pfl->wcycle);
 
     /* Set the device in I/O access mode */
     cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
@@ -230,8 +233,9 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
             p = pfl->storage;
             offset &= ~(pfl->sector_len - 1);
 
-            DPRINTF("%s: block erase at 0x%x bytes 0x%x\n", __func__,
-                            offset, pfl->sector_len);
+            DPRINTF("%s: block erase at " TARGET_FMT_lx " bytes "
+                    TARGET_FMT_lx "\n",
+                    __func__, offset, pfl->sector_len);
 
             memset(p + offset, 0xff, pfl->sector_len);
             pflash_update(pfl, offset, pfl->sector_len);
@@ -278,7 +282,7 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
 
             break;
         case 0xe8:
-            DPRINTF("%s: block write of 0x%x bytes\n", __func__, cmd);
+            DPRINTF("%s: block write of %x bytes\n", __func__, cmd);
             pfl->counter = cmd;
             pfl->wcycle++;
             break;
@@ -311,8 +315,9 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
         switch (pfl->cmd) {
         case 0xe8: /* Block write */
             p = pfl->storage;
-            DPRINTF("%s: block write offset 0x%x value 0x%x counter 0x%x\n",
-                            __func__, offset, value, pfl->counter);
+            DPRINTF("%s: block write offset " TARGET_FMT_lx
+                    " value %x counter " TARGET_FMT_lx "\n",
+                    __func__, offset, value, pfl->counter);
             switch (width) {
             case 1:
                 p[offset] = value;
@@ -382,8 +387,8 @@ static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
 
  error_flash:
     printf("%s: Unimplemented flash cmd sequence "
-                    "(offset 0x%x, wcycle 0x%x cmd 0x%x value 0x%x\n",
-                    __func__, offset, pfl->wcycle, pfl->cmd, value);
+           "(offset " TARGET_FMT_lx ", wcycle 0x%x cmd 0x%x value 0x%x\n",
+           __func__, offset, pfl->wcycle, pfl->cmd, value);
 
  reset_flash:
     cpu_register_physical_memory(pfl->base, pfl->total_len,
@@ -484,7 +489,7 @@ static int ctz32 (uint32_t n)
 }
 
 pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
-                                BlockDriverState *bs, target_ulong sector_len,
+                                BlockDriverState *bs, uint32_t sector_len,
                                 int nb_blocs, int width,
                                 uint16_t id0, uint16_t id1,
                                 uint16_t id2, uint16_t id3)
@@ -495,9 +500,11 @@ pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
     total_len = sector_len * nb_blocs;
 
     /* XXX: to be fixed */
+#if 0
     if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
         total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
         return NULL;
+#endif
 
     pfl = qemu_mallocz(sizeof(pflash_t));