[mirror_edk2.git] / BeagleBoardPkg / BeagleBoardPkg.fdf

# FLASH layout file for Beagle board.\r
#\r
# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>\r
# Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>\r
# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>\r
#\r
#    This program and the accompanying materials\r
#    are licensed and made available under the terms and conditions of the BSD License\r
#    which accompanies this distribution. The full text of the license may be found at\r
#    http://opensource.org/licenses/bsd-license.php\r
#\r
#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
\r
[FD.BeagleBoard_EFI]\r
BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.\r
Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x1\r
NumBlocks     = 0xB0000\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
0x00000000|0x00000200\r
FILE = BeagleBoardPkg/ConfigurationHeader.bin\r
\r
0x00000200|0x00000008\r
DATA = {\r
  0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8\r
  0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000\r
}\r
\r
0x00000208|0x000AFDF8\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x1\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
\r
  INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
!if $(TARGET) == RELEASE\r
  #\r
  # Semi-hosting filesystem\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
!endif\r
\r
  #\r
  # Nand Flash\r
  #\r
  INF Omap35xxPkg/Flash/Flash.inf\r
\r
  #\r
  # MMC/SD\r
  #\r
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
  INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf\r
\r
  #\r
  # I2C\r
  #\r
  INF Omap35xxPkg/SmbusDxe/Smbus.inf\r
\r
  #\r
  # SoC Drivers\r
  #\r
  INF Omap35xxPkg/Gpio/Gpio.inf\r
  INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf\r
  INF Omap35xxPkg/TimerDxe/TimerDxe.inf\r
  INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf\r
\r
  #\r
  # Power IC\r
  #\r
  INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # USB Support\r
  #\r
\r
  INF Omap35xxPkg/PciEmulation/PciEmulation.inf\r
  INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf\r
\r
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF ShellPkg/Application/Shell/Shell.inf\r
  INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
  INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf\r
  INF MdeModulePkg/Application/UiApp/UiApp.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF BeagleBoardPkg/PrePi/PeiUniCore.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
0bade105	1	# FLASH layout file for Beagle board.\r
	2	#\r
	3	# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>\r
ef1b70ff	4	# Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>\r
04fd7859	5	# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>\r
0bade105	6	#\r
	7	# This program and the accompanying materials\r
	8	# are licensed and made available under the terms and conditions of the BSD License\r
	9	# which accompanies this distribution. The full text of the license may be found at\r
	10	# http://opensource.org/licenses/bsd-license.php\r
	11	#\r
	12	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	13	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	14	#\r
	15	\r
	16	################################################################################\r
	17	#\r
	18	# FD Section\r
	19	# The [FD] Section is made up of the definition statements and a\r
	20	# description of what goes into the Flash Device Image. Each FD section\r
	21	# defines one flash "device" image. A flash device image may be one of\r
	22	# the following: Removable media bootable image (like a boot floppy\r
	23	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	24	# card,) a System "Flash" image (that would be burned into a system's\r
	25	# flash) or an Update ("Capsule") image that will be used to update and\r
	26	# existing system flash.\r
	27	#\r
	28	################################################################################\r
	29	\r
	30	\r
	31	[FD.BeagleBoard_EFI]\r
a1123292	32	BaseAddress = 0x80007DF8\|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.\r
55b0a24a	33	Size = 0x000B0000\|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device\r
0bade105	34	ErasePolarity = 1\r
0bade105	35	BlockSize = 0x1\r
55b0a24a	36	NumBlocks = 0xB0000\r
0bade105	37	\r
	38	################################################################################\r
	39	#\r
	40	# Following are lists of FD Region layout which correspond to the locations of different\r
	41	# images within the flash device.\r
	42	#\r
	43	# Regions must be defined in ascending order and may not overlap.\r
	44	#\r
	45	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	46	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	47	# "0x" characters. Like:\r
	48	# Offset\|Size\r
	49	# PcdOffsetCName\|PcdSizeCName\r
	50	# RegionType <FV, DATA, or FILE>\r
	51	#\r
	52	################################################################################\r
a1123292 AB	53	0x00000000\|0x00000200\r
	54	FILE = BeagleBoardPkg/ConfigurationHeader.bin\r
	55	\r
	56	0x00000200\|0x00000008\r
	57	DATA = {\r
	58	0xF8, 0xFD, 0x0A, 0x00, # image size: 0xB0000 - 0x208 == 0xAFDF8\r
	59	0x00, 0x80, 0x00, 0x80 # entry point: 0x80008000\r
	60	}\r
	61	\r
	62	0x00000208\|0x000AFDF8\r
ff4d6bb3	63	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
0bade105	64	FV = FVMAIN_COMPACT\r
	65	\r
	66	################################################################################\r
	67	#\r
	68	# FV Section\r
	69	#\r
	70	# [FV] section is used to define what components or modules are placed within a flash\r
	71	# device file. This section also defines order the components and modules are positioned\r
	72	# within the image. The [FV] section consists of define statements, set statements and\r
	73	# module statements.\r
	74	#\r
	75	################################################################################\r
	76	\r
	77	[FV.FvMain]\r
	78	BlockSize = 0x1\r
	79	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
	80	FvAlignment = 8 # FV alignment and FV attributes setting.\r
	81	ERASE_POLARITY = 1\r
	82	MEMORY_MAPPED = TRUE\r
	83	STICKY_WRITE = TRUE\r
	84	LOCK_CAP = TRUE\r
	85	LOCK_STATUS = TRUE\r
	86	WRITE_DISABLED_CAP = TRUE\r
	87	WRITE_ENABLED_CAP = TRUE\r
	88	WRITE_STATUS = TRUE\r
	89	WRITE_LOCK_CAP = TRUE\r
	90	WRITE_LOCK_STATUS = TRUE\r
	91	READ_DISABLED_CAP = TRUE\r
	92	READ_ENABLED_CAP = TRUE\r
	93	READ_STATUS = TRUE\r
	94	READ_LOCK_CAP = TRUE\r
	95	READ_LOCK_STATUS = TRUE\r
e6c51eaf	96	FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282\r
0bade105	97	\r
3402aac7	98	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
0bade105	99	\r
0bade105	100	#\r
3402aac7	101	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
0bade105	102	#\r
0bade105	103	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
3402aac7	104	\r
0bade105	105	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	106	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	107	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
	108	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
	109	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
	110	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
3402aac7	111	\r
0bade105	112	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
0bade105	113	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
3402aac7	114	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
e497d900	115	INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf\r
3402aac7	116	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
0bade105	117	\r
fb5a64de	118	INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf\r
0bade105	119	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
0bade105	120	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
3402aac7	121	\r
89a9f54f	122	!if $(TARGET) == RELEASE\r
0bade105	123	#\r
	124	# Semi-hosting filesystem\r
	125	#\r
	126	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
89a9f54f	127	!endif\r
3402aac7	128	\r
0bade105	129	#\r
	130	# Nand Flash\r
	131	#\r
	132	INF Omap35xxPkg/Flash/Flash.inf\r
	133	\r
	134	#\r
	135	# MMC/SD\r
	136	#\r
	137	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
	138	INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf\r
3402aac7	139	\r
0bade105	140	#\r
	141	# I2C\r
	142	#\r
	143	INF Omap35xxPkg/SmbusDxe/Smbus.inf\r
3402aac7	144	\r
0bade105	145	#\r
	146	# SoC Drivers\r
	147	#\r
	148	INF Omap35xxPkg/Gpio/Gpio.inf\r
	149	INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf\r
3402aac7	150	INF Omap35xxPkg/TimerDxe/TimerDxe.inf\r
0bade105	151	INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf\r
	152	\r
	153	#\r
	154	# Power IC\r
	155	#\r
	156	INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf\r
	157	\r
	158	#\r
	159	# FAT filesystem + GPT/MBR partitioning\r
	160	#\r
	161	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	162	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
3d1ee3c1	163	INF FatPkg/EnhancedFatDxe/Fat.inf\r
0bade105	164	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	165	\r
	166	#\r
	167	# USB Support\r
	168	#\r
	169	\r
	170	INF Omap35xxPkg/PciEmulation/PciEmulation.inf\r
04fd7859	171	INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf\r
0bade105	172	\r
0bade105	173	INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
	174	INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
	175	INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
	176	\r
	177	#\r
3402aac7 RC	178	# UEFI application (Shell Embedded Boot Loader)\r
3402aac7 RC	179	#\r
581a7aca	180	INF ShellPkg/Application/Shell/Shell.inf\r
ef1b70ff	181	INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf\r
0bade105	182	\r
	183	#\r
	184	# Bds\r
	185	#\r
	186	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	187	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
581a7aca AB	188	INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
	189	INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
	190	INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf\r
	191	INF MdeModulePkg/Application/UiApp/UiApp.inf\r
0bade105	192	\r
	193	\r
	194	[FV.FVMAIN_COMPACT]\r
	195	FvAlignment = 8\r
	196	ERASE_POLARITY = 1\r
	197	MEMORY_MAPPED = TRUE\r
	198	STICKY_WRITE = TRUE\r
	199	LOCK_CAP = TRUE\r
	200	LOCK_STATUS = TRUE\r
	201	WRITE_DISABLED_CAP = TRUE\r
	202	WRITE_ENABLED_CAP = TRUE\r
	203	WRITE_STATUS = TRUE\r
	204	WRITE_LOCK_CAP = TRUE\r
	205	WRITE_LOCK_STATUS = TRUE\r
	206	READ_DISABLED_CAP = TRUE\r
	207	READ_ENABLED_CAP = TRUE\r
	208	READ_STATUS = TRUE\r
	209	READ_LOCK_CAP = TRUE\r
	210	READ_LOCK_STATUS = TRUE\r
	211	\r
917c5627	212	INF BeagleBoardPkg/PrePi/PeiUniCore.inf\r
0bade105	213	\r
	214	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	215	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	216	SECTION FV_IMAGE = FVMAIN\r
	217	}\r
	218	}\r
	219	\r
	220	\r
	221	################################################################################\r
	222	#\r
	223	# Rules are use with the [FV] section's module INF type to define\r
	224	# how an FFS file is created for a given INF file. The following Rule are the default\r
	225	# rules for the different module type. User can add the customized rules to define the\r
	226	# content of the FFS file.\r
	227	#\r
	228	################################################################################\r
	229	\r
	230	\r
	231	############################################################################\r
3402aac7	232	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
0bade105	233	############################################################################\r
	234	#\r
	235	#[Rule.Common.DXE_DRIVER]\r
	236	# FILE DRIVER = $(NAMED_GUID) {\r
	237	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	238	# COMPRESS PI_STD {\r
	239	# GUIDED {\r
	240	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	241	# UI STRING="$(MODULE_NAME)" Optional\r
	242	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	243	# }\r
	244	# }\r
	245	# }\r
	246	#\r
	247	############################################################################\r
	248	\r
	249	[Rule.Common.SEC]\r
	250	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	251	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	252	}\r
	253	\r
	254	[Rule.Common.PEI_CORE]\r
	255	FILE PEI_CORE = $(NAMED_GUID) {\r
	256	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
3402aac7	257	UI STRING ="$(MODULE_NAME)" Optional\r
0bade105	258	}\r
	259	\r
	260	[Rule.Common.PEIM]\r
	261	FILE PEIM = $(NAMED_GUID) {\r
	262	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	263	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
3402aac7	264	UI STRING="$(MODULE_NAME)" Optional\r
0bade105	265	}\r
	266	\r
	267	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
	268	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
	269	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	270	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
	271	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	272	UI STRING="$(MODULE_NAME)" Optional\r
	273	}\r
	274	}\r
	275	\r
	276	[Rule.Common.DXE_CORE]\r
	277	FILE DXE_CORE = $(NAMED_GUID) {\r
	278	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	279	UI STRING="$(MODULE_NAME)" Optional\r
	280	}\r
	281	\r
	282	\r
	283	[Rule.Common.UEFI_DRIVER]\r
	284	FILE DRIVER = $(NAMED_GUID) {\r
	285	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	286	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	287	UI STRING="$(MODULE_NAME)" Optional\r
	288	}\r
	289	\r
	290	[Rule.Common.DXE_DRIVER]\r
	291	FILE DRIVER = $(NAMED_GUID) {\r
	292	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	293	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	294	UI STRING="$(MODULE_NAME)" Optional\r
	295	}\r
	296	\r
	297	[Rule.Common.DXE_RUNTIME_DRIVER]\r
	298	FILE DRIVER = $(NAMED_GUID) {\r
	299	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	300	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	301	UI STRING="$(MODULE_NAME)" Optional\r
	302	}\r
	303	\r
0bade105	304	[Rule.Common.UEFI_APPLICATION]\r
0bade105	305	FILE APPLICATION = $(NAMED_GUID) {\r
3402aac7	306	UI STRING ="$(MODULE_NAME)" Optional\r
0bade105	307	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
0bade105	308	}\r
e1772adf	309	\r
	310	[Rule.Common.UEFI_DRIVER.BINARY]\r
	311	FILE DRIVER = $(NAMED_GUID) {\r
	312	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	313	PE32 PE32 \|.efi\r
	314	UI STRING="$(MODULE_NAME)" Optional\r
	315	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	316	}\r
	317	\r
	318	[Rule.Common.UEFI_APPLICATION.BINARY]\r
	319	FILE APPLICATION = $(NAMED_GUID) {\r
	320	PE32 PE32 \|.efi\r
	321	UI STRING="$(MODULE_NAME)" Optional\r
	322	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	323	}\r