]>
Commit | Line | Data |
---|---|---|
e3e134eb | 1 | ## @file MdeModulePkg.dec\r |
4f57ff18 | 2 | #\r |
a9141950 | 3 | # This package provides the modules that conform to UEFI/PI Industry standards.\r |
73850864 | 4 | # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r |
bf314e67 | 5 | # and libraries instances, which are used for those modules.\r |
b7d286b6 | 6 | #\r |
0777cea6 | 7 | # Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r |
64a80549 | 8 | # This program and the accompanying materials are licensed and made available under \r |
9 | # the terms and conditions of the BSD License that accompanies this distribution. \r | |
4f57ff18 | 10 | # The full text of the license may be found at\r |
64a80549 | 11 | # http://opensource.org/licenses/bsd-license.php. \r |
12 | # \r | |
13 | # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r | |
14 | # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r | |
b7d286b6 | 15 | #\r |
4f57ff18 | 16 | ##\r |
b7d286b6 | 17 | \r |
18 | \r | |
b7d286b6 | 19 | [Defines]\r |
20 | DEC_SPECIFICATION = 0x00010005\r | |
84e20859 | 21 | PACKAGE_NAME = MdeModulePkg\r |
b7d286b6 | 22 | PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r |
048fc992 | 23 | PACKAGE_VERSION = 0.92\r |
b7d286b6 | 24 | \r |
6bfbb5f0 | 25 | [Includes]\r |
ed838d0c | 26 | Include\r |
b7d286b6 | 27 | \r |
30143b15 | 28 | \r |
6bfbb5f0 | 29 | [LibraryClasses]\r |
4f57ff18 | 30 | ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r |
93367605 | 31 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 32 | IpIoLib|Include/Library/IpIoLib.h\r |
73850864 | 33 | \r |
4f57ff18 | 34 | ## @libraryclass Basic function for UEFI network stack.\r |
93367605 | 35 | # This library is only intended to be used by UEFI network stack modules.\r |
518d395c | 36 | NetLib|Include/Library/NetLib.h\r |
73850864 | 37 | \r |
4f57ff18 | 38 | ## @libraryclass The helper routines to access UDP service.\r |
93367605 | 39 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 40 | UdpIoLib|Include/Library/UdpIoLib.h\r |
73850864 | 41 | \r |
4bad9ada | 42 | ## @libraryclass The helper routines to access TCP service.\r |
43 | # This library is only intended to be used by UEFI network stack modules.\r | |
44 | TcpIoLib|Include/Library/TcpIoLib.h\r | |
45 | \r | |
97b2c9b5 LG |
46 | ## @libraryclass Defines a set of methods to reset whole system.\r |
47 | ResetSystemLib|Include/Library/ResetSystemLib.h\r | |
48 | \r | |
4f57ff18 | 49 | ## @libraryclass Defines a set of methods related do S3 mode.\r |
05d71050 | 50 | # This library class is no longer used and modules using this library should\r |
51 | # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r | |
4fb31c2c | 52 | S3Lib|Include/Library/S3Lib.h\r |
73850864 | 53 | \r |
4f57ff18 | 54 | ## @libraryclass Defines a set of methods related recovery mode.\r |
05d71050 | 55 | # This library class is no longer used and modules using this library should\r |
56 | # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r | |
4fb31c2c | 57 | RecoveryLib|Include/Library/RecoveryLib.h\r |
73850864 | 58 | \r |
804dbc37 | 59 | ## @libraryclass Provides HII related functions.\r |
60 | HiiLib|Include/Library/HiiLib.h\r | |
73850864 | 61 | \r |
4f57ff18 | 62 | ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r |
30d3be34 | 63 | CapsuleLib|Include/Library/CapsuleLib.h\r |
73850864 | 64 | \r |
4f57ff18 | 65 | ## @libraryclass Library for Deferred Procedure Calls.\r |
f02d0c0f LG |
66 | DpcLib|Include/Library/DpcLib.h\r |
67 | \r | |
73850864 | 68 | ## @libraryclass Provides global variables that are pointers\r |
a90ccab8 LG |
69 | # to the UEFI HII related protocols.\r |
70 | #\r | |
da801a6e | 71 | UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r |
9a6dcbf3 | 72 | \r |
cd98f305 LG |
73 | ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r |
74 | #\r | |
975e8815 | 75 | SecurityManagementLib|Include/Library/SecurityManagementLib.h\r |
cd98f305 | 76 | \r |
75dea6bd | 77 | ## @libraryclass OEM status code libary is used to report status code to OEM device.\r |
78 | #\r | |
79 | OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r | |
80 | \r | |
fe92ab29 | 81 | ## @libraryclass Debug Agent is used to provide soft debug capability.\r |
82 | #\r | |
83 | DebugAgentLib|Include/Library/DebugAgentLib.h\r | |
6eea8eae | 84 | \r |
467d15ae | 85 | ## @libraryclass Provide platform specific hooks.\r |
86 | #\r | |
87 | PlatformHookLib|Include/Library/PlatformHookLib.h\r | |
495797c5 | 88 | \r |
89 | ## @libraryclass Provide platform specific hooks for SMM core.\r | |
90 | #\r | |
91 | SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r | |
32e85209 JY |
92 | \r |
93 | ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r | |
94 | #\r | |
95 | LockBoxLib|Include/Library/LockBoxLib.h\r | |
467d15ae | 96 | \r |
1e172d6b | 97 | ## @libraryclass Provide the CPU exception handler.\r |
98 | #\r | |
99 | CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r | |
100 | \r | |
6bfbb5f0 | 101 | [Guids]\r |
f02d0c0f | 102 | ## MdeModule package token space guid\r |
a90ccab8 | 103 | # Include/Guid/MdeModulePkgTokenSpace.h\r |
f02d0c0f | 104 | gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r |
351986ae | 105 | \r |
f02d0c0f | 106 | ## Hob guid for Pcd DataBase\r |
a90ccab8 | 107 | # Include/Guid/PcdDataBaseHobGuid.h\r |
351986ae | 108 | gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r |
73850864 | 109 | \r |
5c526736 | 110 | ## Guid for EDKII implementation GUIDed opcodes\r |
97b2c9b5 | 111 | # Include/Guid/MdeModuleHii.h\r |
5c526736 | 112 | gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r |
73850864 | 113 | \r |
5c526736 | 114 | ## Guid for Framework vfr GUIDed opcodes.\r |
97b2c9b5 | 115 | # Include/Guid/MdeModuleHii.h\r |
5c526736 | 116 | gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r |
73850864 | 117 | \r |
f02d0c0f | 118 | ## Guid to specify the System Non Volatile FV\r |
a90ccab8 | 119 | # Include/Guid/SystemNvDataGuid.h\r |
351986ae | 120 | gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r |
73850864 | 121 | \r |
f02d0c0f | 122 | ## Guid specify the device is the console out device.\r |
a90ccab8 | 123 | # Include/Guid/ConsoleOutDevice.h\r |
351986ae | 124 | gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
f02d0c0f LG |
125 | \r |
126 | ## Guid specify the device is the console in device.\r | |
a90ccab8 | 127 | # Include/Guid/ConsoleInDevice.h\r |
351986ae | 128 | gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
73850864 | 129 | \r |
f02d0c0f | 130 | ## Hob and Variable guid specify the platform memory type information.\r |
a90ccab8 | 131 | # Include/Guid/MemoryTypeInformation.h\r |
351986ae | 132 | gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r |
73850864 | 133 | \r |
f02d0c0f | 134 | ## Capsule update hob and variable guid\r |
a90ccab8 | 135 | # Include/Guid/CapsuleVendor.h\r |
351986ae | 136 | gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r |
73850864 | 137 | \r |
f02d0c0f | 138 | ## Guid specifiy the device is the StdErr device.\r |
a90ccab8 | 139 | # Include/Guid/StandardErrorDevice.h\r |
88f20127 | 140 | gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
73850864 | 141 | \r |
3709c4cd | 142 | ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r |
a90ccab8 | 143 | # Include/Guid/VariableFormat.h\r |
3709c4cd | 144 | gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r |
73850864 | 145 | \r |
9725730b | 146 | # Include/Guid/VariableIndexTable.h\r |
147 | gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r | |
148 | \r | |
d00ed85e | 149 | ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r |
150 | # Include/Guid/SmmVariableCommon.h\r | |
151 | gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r | |
152 | \r | |
2db4a77e | 153 | ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r |
a90ccab8 | 154 | # Include/Guid/Performance.h\r |
f0da4d7d SZ |
155 | gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r |
156 | gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r | |
157 | gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r | |
158 | gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r | |
1df7a023 | 159 | \r |
76f1dde2 | 160 | ## Guid is defined for CRC32 encapsulation scheme.\r |
a90ccab8 | 161 | # Include/Guid/Crc32GuidedSectionExtraction.h\r |
76f1dde2 LG |
162 | gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r |
163 | \r | |
63886849 | 164 | ## Include/Guid/NicIp4ConfigNvData.h\r |
165 | gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r | |
25126a05 | 166 | \r |
167 | ## Include/Guid/StatusCodeCallbackGuid.h\r | |
168 | gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r | |
63886849 | 169 | \r |
10c5d87e | 170 | ## GUID identifies status code records HOB that originate from the PEI status code\r |
171 | # Include/Guid/MemoryStatusCodeRecord.h\r | |
172 | gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r | |
173 | \r | |
174 | ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r | |
175 | # Include/Guid/StatusCodeDataTypeDebug.h\r | |
176 | gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r | |
177 | \r | |
54ea99a7 | 178 | ## A configuration Table Guid for Load module at fixed address \r |
179 | # Include/Guid/LoadModuleAtFixedAddress.h\r | |
180 | gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r | |
181 | \r | |
62a5bf63 | 182 | ## GUID used to store the global debug mask value into an EFI Variable\r |
183 | # Include/Guid/DebugMask.h \r | |
184 | gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r | |
185 | \r | |
54cd17e9 | 186 | ## Event for the DXE Core to signal idle events\r |
187 | # Include/Guid/EventIdle.h\r | |
188 | gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r | |
189 | \r | |
30c00a1c | 190 | ## Include/Guid/RecoveryDevice.h\r |
191 | gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r | |
192 | \r | |
193 | ## Include/Guid/RecoveryDevice.h\r | |
194 | gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r | |
195 | \r | |
196 | ## Include/Guid/RecoveryDevice.h\r | |
197 | gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r | |
198 | \r | |
199 | ## Include/Guid/RecoveryDevice.h\r | |
200 | gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r | |
201 | \r | |
1c837cd5 | 202 | ## Include/Guid/SmmLockBox.h\r |
044824d9 | 203 | gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r |
1c837cd5 | 204 | \r |
1261fe23 | 205 | ## Include/Guid/AcpiS3Context.h\r |
206 | gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r | |
207 | \r | |
208 | ## Include/Guid/AcpiS3Context.h\r | |
209 | gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r | |
210 | \r | |
be46cd5f | 211 | ## Include/Guid/BootScriptExecutorVariable.h\r |
212 | gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r | |
213 | gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r | |
214 | \r | |
c8ad2d7a LG |
215 | ## Include/Guid/UsbKeyBoardLayout.h\r |
216 | gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r | |
217 | gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r | |
218 | \r | |
219 | ## Include/Guid/HiiResourceSampleHii.h\r | |
220 | gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r | |
221 | \r | |
222 | ## Include/Guid/DriverSampleHii.h\r | |
223 | gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r | |
224 | gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r | |
c8ad2d7a LG |
225 | gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r |
226 | \r | |
227 | ## Include/Guid/PlatDriOverrideHii.h\r | |
228 | gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r | |
229 | \r | |
230 | ## Include/Guid/Ip4ConfigHii.h\r | |
231 | gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r | |
232 | \r | |
233 | ## Include/Guid/VlanConfigHii.h\r | |
234 | gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r | |
235 | \r | |
236 | ## Include/Guid/Ip4IScsiConfigHii.h\r | |
237 | gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r | |
238 | gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r | |
239 | \r | |
240 | ## Include/Guid/ZeroGuid.h\r | |
241 | gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r | |
242 | \r | |
243 | ## Include/Guid/MtcVendor.h\r | |
244 | gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r | |
245 | \r | |
0284e90c LG |
246 | ## Guid for Firmware Performance Data Table (FPDT) implementation.\r |
247 | # Include/Guid/FirmwarePerformance.h\r | |
044824d9 | 248 | gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r |
db91c620 | 249 | gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r |
044824d9 | 250 | \r |
251 | ## Include/Guid/ExitBootServiceFailed.h\r | |
252 | gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r | |
0284e90c | 253 | \r |
f58f3de0 | 254 | ## Include/Guid/ConnectConInEvent.h\r |
255 | gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r | |
256 | \r | |
4b1bf81c | 257 | [Ppis]\r |
ea060cfa | 258 | ## Include/Ppi/AtaController.h\r |
259 | gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r | |
260 | \r | |
4b1bf81c | 261 | ## Include/Ppi/UsbHostController.h\r |
262 | gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r | |
263 | \r | |
264 | ## Include/Ppi/Usb2HostController.h\r | |
265 | gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r | |
266 | \r | |
267 | ## Include/Ppi/UsbController.h\r | |
268 | gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r | |
269 | \r | |
270 | ## Include/Ppi/UsbIo.h\r | |
271 | gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r | |
272 | \r | |
da58b0db | 273 | ## Include/Ppi/Capsule.h\r |
274 | gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r | |
275 | \r | |
ce2f13a3 | 276 | ## Include/Ppi/SecPerformance.h\r |
277 | gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r | |
278 | \r | |
9fba8e7d | 279 | ## Include/Ppi/SmmCommunication.h\r |
280 | gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r | |
281 | \r | |
e7b7db36 | 282 | ## Include/Ppi/SmmAccess.h\r |
283 | gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r | |
284 | \r | |
3e4df77f | 285 | ## Include/Ppi/SmmControl.h\r |
286 | gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r | |
287 | \r | |
78df32f2 | 288 | ## Include/Ppi/PostBootScriptTable.h\r |
289 | gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r | |
290 | \r | |
6bfbb5f0 | 291 | [Protocols]\r |
023c0fec | 292 | ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r |
a90ccab8 LG |
293 | # Include/Protocol/LoadPe32Image.h\r |
294 | # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r | |
295 | # If developer need implement such functionality, they should use BasePeCoffLib.\r | |
023c0fec | 296 | gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r |
73850864 | 297 | \r |
504dcb0a | 298 | ## Print protocol defines basic print functions to print the format unicode and ascii string.\r |
a90ccab8 | 299 | # Include/Protocol/Print2.h\r |
504dcb0a | 300 | gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r |
2dd4c603 | 301 | \r |
346cf9ac | 302 | ## This protocol defines the generic memory test interfaces in Dxe phase.\r |
a90ccab8 | 303 | # Include/Protocol/GenericMemoryTest.h\r |
351986ae | 304 | gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r |
73850864 | 305 | \r |
55e4e173 | 306 | ## Include/Protocol/Dpc.h\r |
36ee91ca | 307 | gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r |
73850864 | 308 | \r |
85e923a5 LG |
309 | ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r |
310 | # Include/Protocol/FaultTolerantWrite.h\r | |
311 | gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r | |
73850864 | 312 | \r |
8a2d4996 | 313 | ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r |
314 | # Include/Protocol/SmmFaultTolerantWrite.h\r | |
315 | gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r | |
316 | \r | |
85e923a5 LG |
317 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r |
318 | # Include/Protocol/SwapAddressRange.h\r | |
319 | gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r | |
8a2d4996 | 320 | \r |
321 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r | |
322 | # Include/Protocol/SmmSwapAddressRange.h\r | |
323 | gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r | |
324 | \r | |
325 | ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r | |
326 | # Include/Protocol/SmmVariableProtocol.h\r | |
327 | gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r | |
328 | \r | |
ff843847 RN |
329 | ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r |
330 | # Include/Protocol/VariableLock.h\r | |
331 | gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r | |
332 | \r | |
8a2d4996 | 333 | ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r |
334 | # Include/Protocol/SmmFirmwareVolumeBlock.h\r | |
335 | gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r | |
73850864 | 336 | \r |
62a5bf63 | 337 | ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r |
338 | # Include/Guid/DebugMask.h \r | |
339 | gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r | |
1c837cd5 | 340 | \r |
341 | ## Include/Protocol/LockBox.h\r | |
342 | gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r | |
0a48ffb0 LG |
343 | \r |
344 | ## Include/Protocol/FormBrowserEx.h\r | |
48a9d5f7 LG |
345 | gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r |
346 | \r | |
c8ad2d7a LG |
347 | ## Include/Protocol/EbcVmTest.h\r |
348 | gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r | |
349 | \r | |
350 | ## Include/Protocol/EbcSimpleDebugger.h\r | |
351 | gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r | |
e2988e66 | 352 | \r |
353 | ## Include/Protocol/BootLogo.h\r | |
354 | gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r | |
355 | \r | |
a86ae184 | 356 | [PcdsFeatureFlag]\r |
f02d0c0f | 357 | ## Indicate whether platform can support update capsule across a system reset\r |
109e9a61 | 358 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r |
73850864 | 359 | \r |
f806dd27 | 360 | ## This feature flag can be used to enable or disable all PCD PEIM services.\r |
aa19fa57 | 361 | # If TRUE, all PCD PPI services will be produced.\r |
a90ccab8 | 362 | # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r |
f806dd27 LG |
363 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r |
364 | \r | |
f02d0c0f LG |
365 | ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r |
366 | # It can be disabled to save size.\r | |
348c8131 | 367 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r |
73850864 | 368 | \r |
f02d0c0f LG |
369 | ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r |
370 | # It can be disabled to save size.\r | |
348c8131 | 371 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r |
73850864 | 372 | \r |
fc9da5a6 | 373 | ## If TRUE, enable the statistic functionality about variable usage. Such information is\r |
374 | # stored as a vendor configuration table into the EFI system table.\r | |
5e895e6a | 375 | # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r |
73850864 | 376 | # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r |
5e895e6a | 377 | # not output useful info.\r |
33a5a666 | 378 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r |
73850864 | 379 | \r |
f02d0c0f | 380 | ## If TRUE, Unicode Collation Protocol will be installed.\r |
ac12a167 | 381 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r |
73850864 | 382 | \r |
f02d0c0f | 383 | ## If TRUE, Unicode Collation 2 Protocol will be installed.\r |
ac12a167 | 384 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r |
73850864 | 385 | \r |
cebfa899 | 386 | ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
387 | # It could be set FALSE to save size.\r | |
d0c64728 | 388 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r |
73850864 | 389 | \r |
cebfa899 | 390 | ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
391 | # It could be set FALSE to save size.\r | |
d0c64728 | 392 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r |
73850864 | 393 | \r |
aa19fa57 LG |
394 | ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r |
395 | # If TE section is not found, then PeiCore will search PE section.\r | |
396 | # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r | |
397 | # This PCD is used to tune Pei phase performance to reduce the search image time.\r | |
398 | # It can be set according to the generated image section type.\r | |
3076397e | 399 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r |
73850864 | 400 | \r |
fc9da5a6 | 401 | ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r |
c39c3e21 RN |
402 | # interrupt to access usb device in the case of absence of usb stack. \r |
403 | # DUET platform requires the token to be TRUE.\r | |
cc582cff | 404 | gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r |
8a2d4996 | 405 | \r |
f02d0c0f LG |
406 | ## If TRUE, HiiImageProtocol will be installed.\r |
407 | # FALSE is for size reduction.\r | |
813acf3a | 408 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r |
73850864 | 409 | \r |
a8e1ed54 | 410 | ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r |
411 | # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r | |
412 | # from HII database.\r | |
813acf3a | 413 | gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r |
88f20127 | 414 | \r |
73850864 | 415 | ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r |
f806dd27 | 416 | # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r |
a90ccab8 | 417 | # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r |
f806dd27 | 418 | gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r |
73850864 | 419 | \r |
a90ccab8 | 420 | ## If TRUE, HelloWorld Application will print the verbose information.\r |
223c22d8 | 421 | # This PCD is a sample to explain FeatureFlag PCD usage.\r |
223c22d8 | 422 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r |
41ad45c2 | 423 | \r |
a90ccab8 | 424 | ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r |
85e923a5 | 425 | # If FASLE, only FTW Write service is available.\r |
72670d3e | 426 | gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r |
427 | \r | |
a90ccab8 | 428 | ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r |
72670d3e | 429 | # If FALSE, DXE IPL will not support UEFI decompression to save space.\r |
430 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r | |
85e923a5 | 431 | \r |
9060e3ec | 432 | ## This PCD specifies whether PciBus supports the hot plug device.\r |
433 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r | |
434 | \r | |
1ef26783 | 435 | ## This PCD specifies whether the PCI bus driver probes non-standard, \r |
436 | # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r | |
b3ec9b56 | 437 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r |
10c5d87e | 438 | ## This PCD specifies whether StatusCode is reported via Serial port.\r |
439 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r | |
440 | \r | |
441 | ## This PCD specifies whether StatusCode is stored in memory.\r | |
442 | # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r | |
443 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r | |
444 | \r | |
445 | ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r | |
446 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r | |
9060e3ec | 447 | \r |
3dc8585e JY |
448 | ## This PCD specified whether ACPI SDT protocol is installed.\r |
449 | gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r | |
450 | \r | |
aeeb84ba | 451 | ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r |
452 | # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r | |
453 | # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r | |
454 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r | |
11232773 LG |
455 | \r |
456 | ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r | |
457 | # If TRUE, TEXT statement will always be set to GrayOut.\r | |
458 | # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r | |
459 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r | |
aeeb84ba | 460 | \r |
0777cea6 ED |
461 | ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.\r |
462 | # If TRUE, the unselectable menu will be set to GrayOut.\r | |
463 | # If FALSE, the menu will be show as normal menu entry even if it is not selectable.\r | |
464 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r | |
465 | \r | |
74ef1d42 | 466 | ## If TRUE, recovery from IDE disk will be supported.\r |
467 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r | |
468 | \r | |
469 | ## If TRUE, recovery from FAT floppy disk will be supported.\r | |
470 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r | |
471 | \r | |
472 | ## If TRUE, recovery from data CD will be supported.\r | |
473 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r | |
474 | \r | |
475 | ## If TRUE, recovery from FAT USB disk will be supported.\r | |
476 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r | |
477 | \r | |
0284e90c LG |
478 | ## If TRUE, S3 performance data will be supported in ACPI FPDT table.\r |
479 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r | |
480 | \r | |
5d2311be | 481 | [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r |
73850864 | 482 | ##\r |
4e17cc90 | 483 | # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r |
484 | # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r | |
485 | # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r | |
486 | # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r | |
487 | # is built in firmware.\r | |
488 | #\r | |
489 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r | |
490 | \r | |
e47f0da4 | 491 | ##\r |
492 | # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r | |
493 | # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r | |
494 | #\r | |
495 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r | |
496 | \r | |
a86ae184 | 497 | [PcdsFixedAtBuild]\r |
1cedc893 | 498 | ## Dynamic type PCD can be registered callback function for Pcd setting action.\r |
499 | # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r | |
500 | # for a dynamic PCD used in PEI phase.\r | |
b3af5df6 | 501 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r |
9dddc0ff | 502 | \r |
1cedc893 | 503 | ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r |
73850864 | 504 | # to store PCD value.\r |
1cedc893 | 505 | #\r |
b3af5df6 | 506 | gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r |
73850864 | 507 | \r |
1cedc893 | 508 | ## Maximum number of FV is supported by PeiCore's dispatching.\r |
177aabe6 | 509 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r |
f02d0c0f | 510 | \r |
1cedc893 | 511 | ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r |
177aabe6 | 512 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r |
f02d0c0f | 513 | \r |
1cedc893 | 514 | ## Maximum stack size for PeiCore.\r |
58dcdada | 515 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r |
f02d0c0f | 516 | \r |
1cedc893 | 517 | ## Maximum PPI count is supported by PeiCore's PPI database.\r |
eaf539d0 | 518 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r |
73850864 | 519 | \r |
2fcdca1d | 520 | ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r |
a90ccab8 LG |
521 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r |
522 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
523 | # be reflushed through the manner of fault tolerant write.\r | |
b3af5df6 | 524 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r |
73850864 | 525 | \r |
2fcdca1d | 526 | ## The maximum size of single common variable, that is non-HwErr type varible.\r |
518d395c | 527 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r |
73850864 | 528 | \r |
2fcdca1d | 529 | ## The maximum size of single hardware error record variable.\r |
530 | # In IA32/X64 platforms, this value should be larger than 1KB.\r | |
531 | # In IA64 platforms, this value should be larger than 128KB.\r | |
518d395c | 532 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r |
73850864 | 533 | \r |
48cd992a | 534 | ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r |
535 | # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r | |
536 | # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r | |
2fcdca1d | 537 | # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r |
48cd992a | 538 | gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r |
2fcdca1d | 539 | \r |
540 | ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r | |
518d395c | 541 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r |
2fcdca1d | 542 | \r |
543 | ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r | |
544 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r | |
545 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
546 | # be reflushed through the manner of fault tolerant write.\r | |
b3af5df6 | 547 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r |
73850864 | 548 | \r |
f02d0c0f | 549 | ## Size of the FTW working block range.\r |
b3af5df6 | 550 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r |
3c506ddd | 551 | \r |
552 | ## FFS filename to find the ACPI tables\r | |
63971079 | 553 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r |
3c506ddd | 554 | \r |
ab7017fe | 555 | ## FFS filename to find the capsule coalesce image.\r |
556 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r | |
557 | \r | |
9060e3ec | 558 | ## Single root I/O virtualization virtual function memory BAR alignment\r |
559 | # BITN set indicates 2 of n+12 power\r | |
560 | # BIT0 set indicates 4KB alignment\r | |
561 | # BIT1 set indicates 8KB alignment\r | |
562 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r | |
9f7d5b46 | 563 | \r |
54ea99a7 | 564 | ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r |
565 | # -1: Enable the feature as fixed offset to TOLM\r | |
566 | # 0: Disable the feature.\r | |
567 | # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r | |
568 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r | |
569 | \r | |
9f7d5b46 | 570 | ## Smbios version\r |
afe3969c | 571 | gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r |
9060e3ec | 572 | \r |
cfbc1a75 | 573 | ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r |
574 | # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r | |
575 | #\r | |
576 | gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r | |
577 | \r | |
eab90a61 | 578 | ## Progress Code for OS Loader LoadImage start.\r |
579 | # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r | |
580 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r | |
581 | \r | |
582 | ## Progress Code for OS Loader StartImage start.\r | |
583 | # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r | |
584 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r | |
585 | \r | |
586 | ## Progress Code for S3 Suspend start.\r | |
587 | # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r | |
588 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r | |
589 | \r | |
590 | ## Progress Code for S3 Suspend end.\r | |
591 | # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r | |
592 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r | |
593 | \r | |
a86ae184 | 594 | [PcdsFixedAtBuild,PcdsPatchableInModule]\r |
f02d0c0f | 595 | ## Maximun number of performance log entries during PEI phase.\r |
348c8131 | 596 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r |
4e17cc90 | 597 | \r |
598 | ## RTC Update Timeout Value\r | |
599 | gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r | |
73850864 | 600 | \r |
467d15ae | 601 | ## If TRUE, then 16550 serial port registers are in MMIO space. \r |
602 | # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r | |
603 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r | |
604 | \r | |
605 | ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r | |
606 | # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r | |
607 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r | |
608 | \r | |
784ce127 | 609 | ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r |
610 | # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r | |
611 | # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r | |
612 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r | |
613 | \r | |
467d15ae | 614 | ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r |
615 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r | |
616 | \r | |
617 | ## Baud rate for the 16550 serial port. Default is 115200 baud.\r | |
618 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r | |
619 | \r | |
620 | ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r | |
621 | # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r | |
622 | # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r | |
623 | # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r | |
624 | # BIT7..BIT6 - Reserved. Must be 0.\r | |
625 | #\r | |
626 | # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r | |
627 | #\r | |
628 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r | |
629 | \r | |
630 | ## FIFO Control Register (FCR) for the 16550 serial port. \r | |
631 | # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r | |
632 | # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r | |
633 | # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r | |
acaa2726 | 634 | # BIT4..BIT3 - Reserved. Must be 0.\r |
635 | # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r | |
636 | # BIT7..BIT6 - Reserved. Must be 0.\r | |
467d15ae | 637 | #\r |
638 | # Default is to enable and clear all FIFOs.\r | |
639 | #\r | |
640 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r | |
641 | \r | |
6eea8eae LG |
642 | ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r |
643 | # structure. The default value for this PCD is 0, which means that the DXE Core\r | |
644 | # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r | |
645 | # boundary as close to the top of memory as feasible. If this PCD is set to a \r | |
646 | # value other than 0, then the DXE Core will first attempt to allocate the \r | |
647 | # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r | |
648 | # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r | |
649 | # boundary as close to the top of memory as feasible.\r | |
650 | #\r | |
651 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r | |
838a9c58 | 652 | \r |
be046357 | 653 | [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r |
b9b5e307 | 654 | ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r |
655 | # This PCD could be set to 0 then console output could be at max column and max row.\r | |
4bfa7dc4 | 656 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r |
73850864 | 657 | \r |
b9b5e307 | 658 | ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r |
659 | # This PCD could be set to 0 then console output could be at max column and max row.\r | |
4e17cc90 | 660 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r |
73850864 | 661 | \r |
b9b5e307 | 662 | ## This PCD defines the video horizontal resolution.\r |
663 | # This PCD could be set to 0 then video resolution could be at highest resolution.\r | |
664 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r | |
665 | \r | |
666 | ## This PCD defines the video vertical resolution.\r | |
667 | # This PCD could be set to 0 then video resolution could be at highest resolution.\r | |
668 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r | |
669 | \r | |
be046357 | 670 | [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r |
73850864 | 671 | ## Base address of the NV variable range in flash device\r |
a86ae184 | 672 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r |
73850864 | 673 | \r |
a86ae184 | 674 | ## Base address of the FTW spare block range in flash device.\r |
73850864 | 675 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r |
676 | \r | |
a86ae184 | 677 | ## Base address of the FTW working block range in flash device.\r |
73850864 | 678 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r |
679 | \r | |
92a4f6f3 | 680 | ## 64-bit Base address of the NV variable range in flash device\r |
681 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r | |
682 | \r | |
683 | ## 64-bit Base address of the FTW spare block range in flash device.\r | |
684 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r | |
685 | \r | |
686 | ## 64-bit Base address of the FTW working block range in flash device.\r | |
687 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r | |
688 | \r | |
a90ccab8 | 689 | ## This PCD defines the print string.\r |
4e17cc90 | 690 | # This PCD is a sample to explain String typed PCD usage.\r |
73850864 | 691 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r |
692 | \r | |
02328a57 | 693 | ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r |
694 | # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r | |
695 | gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r | |
696 | \r | |
099f2b18 | 697 | ## This PCD specifies whether the Single Root I/O virtualization support.\r |
698 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r | |
699 | \r | |
700 | ## This PCD specifies whether the Alternative Routing-ID support.\r | |
701 | gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r | |
702 | \r | |
703 | ## This PCD specifies whether the Multi Root I/O virtualization support.\r | |
704 | gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r | |
705 | \r | |
be046357 | 706 | [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r |
a90ccab8 | 707 | ## This PCD defines the times to print hello world string.\r |
4e17cc90 | 708 | # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r |
4e17cc90 | 709 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r |
b7d286b6 | 710 | \r |
0ef42f88 | 711 | ## Indicate the max size of the capsule image with reset flag that the platform can support.\r |
73850864 | 712 | # The default max size is 100MB (0x6400000) for more than one large capsule images.\r |
4e17cc90 | 713 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r |
73850864 | 714 | \r |
0ef42f88 | 715 | ## Indicate the max size of the capsule image without reset flag that the platform can support.\r |
716 | # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r | |
4e17cc90 | 717 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r |
6144e7af | 718 | \r |
719 | ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r | |
e026f005 | 720 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r |
73850864 | 721 | \r |
6144e7af | 722 | ## Firmware revision that is default value filled into the EFI System Table\r |
723 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r | |
724 | \r | |
725 | ## Null-terminated Unicode string that described the firmware version\r | |
73850864 | 726 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r |
727 | \r | |
6144e7af | 728 | ## Null-terminated Unicode string that contains the date the formware was released\r |
729 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r | |
730 | \r | |
10c5d87e | 731 | ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r |
732 | # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r | |
733 | # The default value in PeiPhase is 1 KBytes.\r | |
734 | # The default value in DxePhase is 128 KBytes.\r | |
735 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r | |
736 | \r | |
dad63934 RN |
737 | ## This PCD specifies whether to reset system when memory type information changes.\r |
738 | gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r | |
739 | \r | |
f0a1bf11 LG |
740 | ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r |
741 | # Only following values defined in UEFI specification are valid:\r | |
742 | # 0x00 (EFI_BLACK)\r | |
743 | # 0x01 (EFI_BLUE)\r | |
744 | # 0x02 (EFI_GREEN)\r | |
745 | # 0x03 (EFI_CYAN)\r | |
746 | # 0x04 (EFI_RED)\r | |
747 | # 0x05 (EFI_MAGENTA)\r | |
748 | # 0x06 (EFI_BROWN)\r | |
749 | # 0x07 (EFI_LIGHTGRAY)\r | |
750 | # 0x08 (EFI_DARKGRAY) \r | |
751 | # 0x09 (EFI_LIGHTBLUE)\r | |
752 | # 0x0A (EFI_LIGHTGREEN)\r | |
753 | # 0x0B (EFI_LIGHTCYAN)\r | |
754 | # 0x0C (EFI_LIGHTRED)\r | |
755 | # 0x0D (EFI_LIGHTMAGENTA)\r | |
756 | # 0x0E (EFI_YELLOW)\r | |
757 | # 0x0F (EFI_WHITE)\r | |
758 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r | |
759 | \r | |
760 | ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r | |
761 | # Only following values defined in UEFI specification are valid:\r | |
762 | # 0x00 (EFI_BLACK)\r | |
763 | # 0x01 (EFI_BLUE)\r | |
764 | # 0x02 (EFI_GREEN)\r | |
765 | # 0x03 (EFI_CYAN)\r | |
766 | # 0x04 (EFI_RED)\r | |
767 | # 0x05 (EFI_MAGENTA)\r | |
768 | # 0x06 (EFI_BROWN)\r | |
769 | # 0x07 (EFI_LIGHTGRAY)\r | |
770 | # 0x08 (EFI_DARKGRAY) \r | |
771 | # 0x09 (EFI_LIGHTBLUE)\r | |
772 | # 0x0A (EFI_LIGHTGREEN)\r | |
773 | # 0x0B (EFI_LIGHTCYAN)\r | |
774 | # 0x0C (EFI_LIGHTRED)\r | |
775 | # 0x0D (EFI_LIGHTMAGENTA)\r | |
776 | # 0x0E (EFI_YELLOW)\r | |
777 | # 0x0F (EFI_WHITE)\r | |
778 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r | |
779 | \r | |
780 | ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r | |
781 | # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r | |
782 | # 0x00 (EFI_BLACK)\r | |
783 | # 0x01 (EFI_BLUE)\r | |
784 | # 0x02 (EFI_GREEN)\r | |
785 | # 0x03 (EFI_CYAN)\r | |
786 | # 0x04 (EFI_RED)\r | |
787 | # 0x05 (EFI_MAGENTA)\r | |
788 | # 0x06 (EFI_BROWN)\r | |
789 | # 0x07 (EFI_LIGHTGRAY)\r | |
790 | # 0x08 (EFI_DARKGRAY) \r | |
791 | # 0x09 (EFI_LIGHTBLUE)\r | |
792 | # 0x0A (EFI_LIGHTGREEN)\r | |
793 | # 0x0B (EFI_LIGHTCYAN)\r | |
794 | # 0x0C (EFI_LIGHTRED)\r | |
795 | # 0x0D (EFI_LIGHTMAGENTA)\r | |
796 | # 0x0E (EFI_YELLOW)\r | |
797 | # 0x0F (EFI_WHITE)\r | |
798 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r | |
799 | \r | |
800 | ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r | |
801 | # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r | |
802 | # 0x00 (EFI_BACKGROUND_BLACK)\r | |
803 | # 0x10 (EFI_BACKGROUND_BLUE)\r | |
804 | # 0x20 (EFI_BACKGROUND_GREEN)\r | |
805 | # 0x30 (EFI_BACKGROUND_CYAN)\r | |
806 | # 0x40 (EFI_BACKGROUND_RED)\r | |
807 | # 0x50 (EFI_BACKGROUND_MAGENTA)\r | |
808 | # 0x60 (EFI_BACKGROUND_BROWN)\r | |
809 | # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r | |
810 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r | |
811 | \r | |
ea060cfa | 812 | ## Time in second to delay for SATA devices to spin-up for recovery.\r |
813 | gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r | |
814 | \r | |
88d20adc | 815 | ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r |
816 | # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r | |
817 | # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r | |
818 | # script node created in runtime phase.\r | |
819 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r | |
820 | \r | |
ab7017fe | 821 | ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r |
822 | # The default size 32K. When changing the value of this PCD, the platform developer should\r | |
823 | # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r | |
6bea3336 | 824 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r |
ab7017fe | 825 | \r |
3ecd0155 JY |
826 | ## This PCD specifies whether 1G page table is enabled.\r |
827 | gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r | |
828 | \r | |
1c0cc375 LG |
829 | ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for \r |
830 | # the extension FPDT boot records got after ReadyToBoot and before ExitBootService.\r | |
831 | gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r | |
832 | \r | |
838a9c58 | 833 | ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn\r |
834 | # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r | |
835 | # by Consplitter should be called before any real key read operation.\r | |
836 | gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r | |
837 | \r | |
0e185864 | 838 | ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.\r |
839 | gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r | |
840 | \r | |
097e8d68 LG |
841 | [PcdsPatchableInModule]\r |
842 | ## Specify memory size with page number for PEI code when \r | |
843 | # the feature of Loading Module at Fixed Address is enabled\r | |
54ea99a7 | 844 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r |
845 | \r | |
846 | ## Specify memory size with page number for DXE boot time code when \r | |
847 | # the feature of Loading Module at Fixed Address is enabled\r | |
848 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r | |
849 | \r | |
850 | ## Specify memory size with page number for DXE runtime code when \r | |
851 | # the feature of Loading Module at Fixed Address is enabled\r | |
852 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r | |
853 | \r | |
854 | ## Specify memory size with page number for SMM code when \r | |
855 | # the feature of Loading Module at Fixed Address is enabled\r | |
856 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r | |
857 | \r | |
88d20adc | 858 | [PcdsDynamic, PcdsDynamicEx]\r |
859 | ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r | |
860 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r | |
861 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r | |
862 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r | |
863 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r | |
864 | \r | |
3aa764ed SZ |
865 | ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r |
866 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r | |
867 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r | |
868 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r | |
869 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r | |
870 | \r |