]>
Commit | Line | Data |
---|---|---|
e3e134eb | 1 | ## @file MdeModulePkg.dec\r |
a9141950 | 2 | # This package provides the modules that conform to UEFI/PI Industry standards.\r |
35c77dae | 3 | # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r |
bf314e67 | 4 | # and libraries instances, which are used for those modules.\r |
b7d286b6 | 5 | #\r |
efb01a10 | 6 | # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r |
64a80549 | 7 | # This program and the accompanying materials are licensed and made available under \r |
8 | # the terms and conditions of the BSD License that accompanies this distribution. \r | |
4f57ff18 | 9 | # The full text of the license may be found at\r |
64a80549 | 10 | # http://opensource.org/licenses/bsd-license.php. \r |
11 | # \r | |
12 | # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r | |
13 | # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r | |
b7d286b6 | 14 | #\r |
4f57ff18 | 15 | ##\r |
b7d286b6 | 16 | \r |
17 | \r | |
b7d286b6 | 18 | [Defines]\r |
19 | DEC_SPECIFICATION = 0x00010005\r | |
84e20859 | 20 | PACKAGE_NAME = MdeModulePkg\r |
fe44bae5 | 21 | PACKAGE_UNI_FILE = MdeModulePkg.uni\r |
b7d286b6 | 22 | PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r |
cd68e4a8 | 23 | PACKAGE_VERSION = 0.96\r |
b7d286b6 | 24 | \r |
6bfbb5f0 | 25 | [Includes]\r |
ed838d0c | 26 | Include\r |
b7d286b6 | 27 | \r |
30143b15 | 28 | \r |
6bfbb5f0 | 29 | [LibraryClasses]\r |
4f57ff18 | 30 | ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r |
93367605 | 31 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 32 | IpIoLib|Include/Library/IpIoLib.h\r |
73850864 | 33 | \r |
4f57ff18 | 34 | ## @libraryclass Basic function for UEFI network stack.\r |
93367605 | 35 | # This library is only intended to be used by UEFI network stack modules.\r |
518d395c | 36 | NetLib|Include/Library/NetLib.h\r |
73850864 | 37 | \r |
4f57ff18 | 38 | ## @libraryclass The helper routines to access UDP service.\r |
93367605 | 39 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 40 | UdpIoLib|Include/Library/UdpIoLib.h\r |
73850864 | 41 | \r |
4bad9ada | 42 | ## @libraryclass The helper routines to access TCP service.\r |
43 | # This library is only intended to be used by UEFI network stack modules.\r | |
44 | TcpIoLib|Include/Library/TcpIoLib.h\r | |
45 | \r | |
3f6d5100 | 46 | ## @libraryclass The helper routines to access HTTP service.\r |
47 | # This library is only intended to be used by UEFI network stack modules.\r | |
48 | HttpLib|Include/Library/HttpLib.h\r | |
49 | \r | |
97b2c9b5 LG |
50 | ## @libraryclass Defines a set of methods to reset whole system.\r |
51 | ResetSystemLib|Include/Library/ResetSystemLib.h\r | |
52 | \r | |
4f57ff18 | 53 | ## @libraryclass Defines a set of methods related do S3 mode.\r |
05d71050 | 54 | # This library class is no longer used and modules using this library should\r |
55 | # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r | |
4fb31c2c | 56 | S3Lib|Include/Library/S3Lib.h\r |
73850864 | 57 | \r |
4f57ff18 | 58 | ## @libraryclass Defines a set of methods related recovery mode.\r |
05d71050 | 59 | # This library class is no longer used and modules using this library should\r |
60 | # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r | |
4fb31c2c | 61 | RecoveryLib|Include/Library/RecoveryLib.h\r |
73850864 | 62 | \r |
804dbc37 | 63 | ## @libraryclass Provides HII related functions.\r |
64 | HiiLib|Include/Library/HiiLib.h\r | |
73850864 | 65 | \r |
4f57ff18 | 66 | ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r |
30d3be34 | 67 | CapsuleLib|Include/Library/CapsuleLib.h\r |
73850864 | 68 | \r |
4f57ff18 | 69 | ## @libraryclass Library for Deferred Procedure Calls.\r |
f02d0c0f LG |
70 | DpcLib|Include/Library/DpcLib.h\r |
71 | \r | |
73850864 | 72 | ## @libraryclass Provides global variables that are pointers\r |
a90ccab8 LG |
73 | # to the UEFI HII related protocols.\r |
74 | #\r | |
da801a6e | 75 | UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r |
9a6dcbf3 | 76 | \r |
cd98f305 LG |
77 | ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r |
78 | #\r | |
975e8815 | 79 | SecurityManagementLib|Include/Library/SecurityManagementLib.h\r |
cd98f305 | 80 | \r |
75dea6bd | 81 | ## @libraryclass OEM status code libary is used to report status code to OEM device.\r |
82 | #\r | |
83 | OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r | |
84 | \r | |
fe92ab29 | 85 | ## @libraryclass Debug Agent is used to provide soft debug capability.\r |
86 | #\r | |
87 | DebugAgentLib|Include/Library/DebugAgentLib.h\r | |
6eea8eae | 88 | \r |
467d15ae | 89 | ## @libraryclass Provide platform specific hooks.\r |
90 | #\r | |
91 | PlatformHookLib|Include/Library/PlatformHookLib.h\r | |
495797c5 | 92 | \r |
93 | ## @libraryclass Provide platform specific hooks for SMM core.\r | |
94 | #\r | |
95 | SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r | |
32e85209 JY |
96 | \r |
97 | ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r | |
98 | #\r | |
99 | LockBoxLib|Include/Library/LockBoxLib.h\r | |
467d15ae | 100 | \r |
1e172d6b | 101 | ## @libraryclass Provide the CPU exception handler.\r |
102 | #\r | |
103 | CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r | |
104 | \r | |
7c6c064c ED |
105 | ## @libraryclass Provides platform specific display interface.\r |
106 | #\r | |
107 | CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r | |
108 | \r | |
ae591c14 DM |
109 | ## @libraryclass Provides sorting functions\r |
110 | SortLib|Include/Library/SortLib.h\r | |
111 | \r | |
1d112229 RN |
112 | ## @libraryclass Provides core boot manager functions\r |
113 | UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r | |
114 | \r | |
f4cd24da RN |
115 | ## @libraryclass Provides core boot manager functions\r |
116 | PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r | |
117 | \r | |
308521b1 SZ |
118 | ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r |
119 | #\r | |
120 | TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r | |
121 | \r | |
b6477d82 SZ |
122 | ## @libraryclass Provides authenticated variable services.\r |
123 | #\r | |
371dc63d | 124 | AuthVariableLib|Include/Library/AuthVariableLib.h\r |
b6477d82 | 125 | \r |
31b183bc SZ |
126 | ## @libraryclass Provides variable check services and database management.\r |
127 | #\r | |
128 | VarCheckLib|Include/Library/VarCheckLib.h\r | |
129 | \r | |
c95d9ab8 SZ |
130 | ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r |
131 | #\r | |
132 | PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r | |
133 | \r | |
6bfbb5f0 | 134 | [Guids]\r |
f02d0c0f | 135 | ## MdeModule package token space guid\r |
a90ccab8 | 136 | # Include/Guid/MdeModulePkgTokenSpace.h\r |
f02d0c0f | 137 | gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r |
351986ae | 138 | \r |
f02d0c0f | 139 | ## Hob guid for Pcd DataBase\r |
a90ccab8 | 140 | # Include/Guid/PcdDataBaseHobGuid.h\r |
351986ae | 141 | gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r |
73850864 | 142 | \r |
419db80b BF |
143 | ## Guid for PCD DataBase signature.\r |
144 | # Include/Guid/PcdDataBaseSignatureGuid.h\r | |
145 | gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r | |
146 | \r | |
5c526736 | 147 | ## Guid for EDKII implementation GUIDed opcodes\r |
97b2c9b5 | 148 | # Include/Guid/MdeModuleHii.h\r |
5c526736 | 149 | gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r |
73850864 | 150 | \r |
5c526736 | 151 | ## Guid for Framework vfr GUIDed opcodes.\r |
97b2c9b5 | 152 | # Include/Guid/MdeModuleHii.h\r |
5c526736 | 153 | gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r |
73850864 | 154 | \r |
f02d0c0f | 155 | ## Guid to specify the System Non Volatile FV\r |
a90ccab8 | 156 | # Include/Guid/SystemNvDataGuid.h\r |
351986ae | 157 | gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r |
73850864 | 158 | \r |
3e02ebb2 SZ |
159 | ## GUID used as the signature of FTW working block header.\r |
160 | # Include/Guid/SystemNvDataGuid.h\r | |
161 | gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r | |
162 | \r | |
163 | ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r | |
164 | # Include/Guid/FaultTolerantWrite.h\r | |
165 | gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r | |
166 | \r | |
f02d0c0f | 167 | ## Guid specify the device is the console out device.\r |
a90ccab8 | 168 | # Include/Guid/ConsoleOutDevice.h\r |
351986ae | 169 | gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
f02d0c0f LG |
170 | \r |
171 | ## Guid specify the device is the console in device.\r | |
a90ccab8 | 172 | # Include/Guid/ConsoleInDevice.h\r |
351986ae | 173 | gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
73850864 | 174 | \r |
f02d0c0f | 175 | ## Hob and Variable guid specify the platform memory type information.\r |
a90ccab8 | 176 | # Include/Guid/MemoryTypeInformation.h\r |
351986ae | 177 | gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r |
73850864 | 178 | \r |
f02d0c0f | 179 | ## Capsule update hob and variable guid\r |
a90ccab8 | 180 | # Include/Guid/CapsuleVendor.h\r |
351986ae | 181 | gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r |
73850864 | 182 | \r |
f02d0c0f | 183 | ## Guid specifiy the device is the StdErr device.\r |
a90ccab8 | 184 | # Include/Guid/StandardErrorDevice.h\r |
88f20127 | 185 | gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
73850864 | 186 | \r |
3709c4cd | 187 | ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r |
a90ccab8 | 188 | # Include/Guid/VariableFormat.h\r |
3709c4cd | 189 | gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r |
73850864 | 190 | \r |
1fe6c125 SZ |
191 | ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r |
192 | # Include/Guid/AuthenticatedVariableFormat.h\r | |
193 | gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r | |
194 | \r | |
9725730b | 195 | # Include/Guid/VariableIndexTable.h\r |
196 | gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r | |
197 | \r | |
d00ed85e | 198 | ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r |
199 | # Include/Guid/SmmVariableCommon.h\r | |
200 | gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r | |
201 | \r | |
2db4a77e | 202 | ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r |
a90ccab8 | 203 | # Include/Guid/Performance.h\r |
f0da4d7d SZ |
204 | gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r |
205 | gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r | |
206 | gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r | |
207 | gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r | |
1df7a023 | 208 | \r |
76f1dde2 | 209 | ## Guid is defined for CRC32 encapsulation scheme.\r |
a90ccab8 | 210 | # Include/Guid/Crc32GuidedSectionExtraction.h\r |
76f1dde2 LG |
211 | gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r |
212 | \r | |
25126a05 | 213 | ## Include/Guid/StatusCodeCallbackGuid.h\r |
214 | gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r | |
63886849 | 215 | \r |
10c5d87e | 216 | ## GUID identifies status code records HOB that originate from the PEI status code\r |
217 | # Include/Guid/MemoryStatusCodeRecord.h\r | |
218 | gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r | |
219 | \r | |
220 | ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r | |
221 | # Include/Guid/StatusCodeDataTypeDebug.h\r | |
222 | gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r | |
223 | \r | |
54ea99a7 | 224 | ## A configuration Table Guid for Load module at fixed address \r |
225 | # Include/Guid/LoadModuleAtFixedAddress.h\r | |
226 | gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r | |
227 | \r | |
62a5bf63 | 228 | ## GUID used to store the global debug mask value into an EFI Variable\r |
229 | # Include/Guid/DebugMask.h \r | |
230 | gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r | |
231 | \r | |
54cd17e9 | 232 | ## Event for the DXE Core to signal idle events\r |
233 | # Include/Guid/EventIdle.h\r | |
234 | gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r | |
235 | \r | |
30c00a1c | 236 | ## Include/Guid/RecoveryDevice.h\r |
237 | gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r | |
238 | \r | |
239 | ## Include/Guid/RecoveryDevice.h\r | |
240 | gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r | |
241 | \r | |
242 | ## Include/Guid/RecoveryDevice.h\r | |
243 | gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r | |
244 | \r | |
245 | ## Include/Guid/RecoveryDevice.h\r | |
246 | gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r | |
247 | \r | |
1c837cd5 | 248 | ## Include/Guid/SmmLockBox.h\r |
044824d9 | 249 | gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r |
1c837cd5 | 250 | \r |
1261fe23 | 251 | ## Include/Guid/AcpiS3Context.h\r |
252 | gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r | |
253 | \r | |
254 | ## Include/Guid/AcpiS3Context.h\r | |
255 | gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r | |
256 | \r | |
be46cd5f | 257 | ## Include/Guid/BootScriptExecutorVariable.h\r |
258 | gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r | |
259 | gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r | |
260 | \r | |
c8ad2d7a LG |
261 | ## Include/Guid/UsbKeyBoardLayout.h\r |
262 | gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r | |
263 | gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r | |
264 | \r | |
265 | ## Include/Guid/HiiResourceSampleHii.h\r | |
266 | gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r | |
267 | \r | |
268 | ## Include/Guid/DriverSampleHii.h\r | |
269 | gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r | |
270 | gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r | |
c8ad2d7a LG |
271 | gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r |
272 | \r | |
273 | ## Include/Guid/PlatDriOverrideHii.h\r | |
274 | gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r | |
275 | \r | |
1f6729ff | 276 | ## Include/Guid/Ip4Config2Hii.h\r |
277 | gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r | |
278 | \r | |
c8ad2d7a LG |
279 | ## Include/Guid/VlanConfigHii.h\r |
280 | gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r | |
281 | \r | |
282 | ## Include/Guid/Ip4IScsiConfigHii.h\r | |
283 | gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r | |
284 | gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r | |
285 | \r | |
286 | ## Include/Guid/ZeroGuid.h\r | |
287 | gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r | |
288 | \r | |
289 | ## Include/Guid/MtcVendor.h\r | |
290 | gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r | |
291 | \r | |
0284e90c LG |
292 | ## Guid for Firmware Performance Data Table (FPDT) implementation.\r |
293 | # Include/Guid/FirmwarePerformance.h\r | |
044824d9 | 294 | gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r |
db91c620 | 295 | gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r |
044824d9 | 296 | \r |
297 | ## Include/Guid/ExitBootServiceFailed.h\r | |
298 | gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r | |
0284e90c | 299 | \r |
f58f3de0 | 300 | ## Include/Guid/ConnectConInEvent.h\r |
301 | gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r | |
302 | \r | |
69fc8f08 RN |
303 | ## Include/Guid/StatusCodeDataTypeVariable.h\r |
304 | gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r | |
84edd20b SZ |
305 | \r |
306 | ## Include/Guid/MemoryProfile.h\r | |
307 | gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r | |
69fc8f08 | 308 | \r |
4edb1866 SZ |
309 | ## Include/Protocol/VarErrorFlag.h\r |
310 | gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r | |
311 | \r | |
a7adc5c5 LG |
312 | ## GUID indicates the LZMA custom compress/decompress algorithm.\r |
313 | # Include/Guid/LzmaDecompress.h\r | |
314 | gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r | |
315 | gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r | |
316 | \r | |
6e3227c8 RF |
317 | ## Include/Guid/TtyTerm.h\r |
318 | gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r | |
319 | \r | |
143f0b1d ED |
320 | ## Include/Guid/HiiBootMaintenanceFormset.h\r |
321 | gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r | |
322 | \r | |
4b1bf81c | 323 | [Ppis]\r |
ea060cfa | 324 | ## Include/Ppi/AtaController.h\r |
325 | gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r | |
326 | \r | |
4b1bf81c | 327 | ## Include/Ppi/UsbHostController.h\r |
328 | gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r | |
329 | \r | |
330 | ## Include/Ppi/Usb2HostController.h\r | |
331 | gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r | |
332 | \r | |
333 | ## Include/Ppi/UsbController.h\r | |
334 | gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r | |
335 | \r | |
336 | ## Include/Ppi/UsbIo.h\r | |
337 | gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r | |
338 | \r | |
ce2f13a3 | 339 | ## Include/Ppi/SecPerformance.h\r |
340 | gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r | |
341 | \r | |
9fba8e7d | 342 | ## Include/Ppi/SmmCommunication.h\r |
343 | gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r | |
344 | \r | |
e7b7db36 | 345 | ## Include/Ppi/SmmAccess.h\r |
346 | gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r | |
347 | \r | |
3e4df77f | 348 | ## Include/Ppi/SmmControl.h\r |
349 | gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r | |
350 | \r | |
78df32f2 | 351 | ## Include/Ppi/PostBootScriptTable.h\r |
352 | gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r | |
353 | \r | |
883e23d0 LG |
354 | ## Include/Ppi/SerialPortPei.h\r |
355 | gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r | |
356 | \r | |
0591696e FT |
357 | ## Include/Ppi/UfsHostController.h\r |
358 | gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r | |
359 | \r | |
6bfbb5f0 | 360 | [Protocols]\r |
023c0fec | 361 | ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r |
a90ccab8 LG |
362 | # Include/Protocol/LoadPe32Image.h\r |
363 | # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r | |
364 | # If developer need implement such functionality, they should use BasePeCoffLib.\r | |
023c0fec | 365 | gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r |
73850864 | 366 | \r |
504dcb0a | 367 | ## Print protocol defines basic print functions to print the format unicode and ascii string.\r |
a90ccab8 | 368 | # Include/Protocol/Print2.h\r |
504dcb0a | 369 | gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r |
2dd4c603 | 370 | \r |
346cf9ac | 371 | ## This protocol defines the generic memory test interfaces in Dxe phase.\r |
a90ccab8 | 372 | # Include/Protocol/GenericMemoryTest.h\r |
351986ae | 373 | gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r |
73850864 | 374 | \r |
55e4e173 | 375 | ## Include/Protocol/Dpc.h\r |
36ee91ca | 376 | gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r |
73850864 | 377 | \r |
85e923a5 LG |
378 | ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r |
379 | # Include/Protocol/FaultTolerantWrite.h\r | |
380 | gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r | |
73850864 | 381 | \r |
8a2d4996 | 382 | ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r |
383 | # Include/Protocol/SmmFaultTolerantWrite.h\r | |
384 | gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r | |
385 | \r | |
85e923a5 LG |
386 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r |
387 | # Include/Protocol/SwapAddressRange.h\r | |
388 | gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r | |
8a2d4996 | 389 | \r |
390 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r | |
391 | # Include/Protocol/SmmSwapAddressRange.h\r | |
392 | gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r | |
393 | \r | |
394 | ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r | |
395 | # Include/Protocol/SmmVariableProtocol.h\r | |
396 | gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r | |
397 | \r | |
ff843847 RN |
398 | ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r |
399 | # Include/Protocol/VariableLock.h\r | |
400 | gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r | |
401 | \r | |
efb01a10 SZ |
402 | ## Include/Protocol/VarCheck.h\r |
403 | gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r | |
404 | \r | |
405 | ## Include/Protocol/SmmVarCheck.h\r | |
406 | gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r | |
407 | \r | |
8a2d4996 | 408 | ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r |
409 | # Include/Protocol/SmmFirmwareVolumeBlock.h\r | |
410 | gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r | |
73850864 | 411 | \r |
62a5bf63 | 412 | ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r |
413 | # Include/Guid/DebugMask.h \r | |
414 | gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r | |
1c837cd5 | 415 | \r |
416 | ## Include/Protocol/LockBox.h\r | |
417 | gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r | |
0a48ffb0 LG |
418 | \r |
419 | ## Include/Protocol/FormBrowserEx.h\r | |
48a9d5f7 LG |
420 | gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r |
421 | \r | |
c8ad2d7a LG |
422 | ## Include/Protocol/EbcVmTest.h\r |
423 | gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r | |
424 | \r | |
425 | ## Include/Protocol/EbcSimpleDebugger.h\r | |
426 | gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r | |
e2988e66 | 427 | \r |
428 | ## Include/Protocol/BootLogo.h\r | |
429 | gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r | |
430 | \r | |
7c6c064c ED |
431 | ## Include/Protocol/DisplayProtocol.h\r |
432 | gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r | |
433 | \r | |
434 | ## Include/Protocol/FormBrowserEx2.h\r | |
435 | gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r | |
436 | \r | |
0591696e FT |
437 | ## Include/Protocol/UfsHostController.h\r |
438 | gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r | |
8d51e87d CZ |
439 | \r |
440 | ## Include/Protocol/EsrtManagement.h\r | |
441 | gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r | |
0591696e | 442 | \r |
53ec4d7f SZ |
443 | ## Include/Protocol/SmmExitBootServices.h\r |
444 | gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r | |
445 | \r | |
446 | ## Include/Protocol/SmmLegacyBoot.h\r | |
447 | gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r | |
448 | \r | |
449 | ## Include/Protocol/SmmReadyToBoot.h\r | |
450 | gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r | |
451 | \r | |
fe44bae5 SZ |
452 | #\r |
453 | # [Error.gEfiMdeModulePkgTokenSpaceGuid]\r | |
454 | # 0x80000001 | Invalid value provided.\r | |
455 | # 0x80000002 | Reserved bits must be set to zero.\r | |
456 | # 0x80000003 | Incorrect progress code provided.\r | |
457 | # 0x80000004 | Invalid foreground color specified.\r | |
458 | # 0x80000005 | Invalid background color specified.\r | |
459 | # 0x80000006 | Incorrect error code provided.\r | |
460 | #\r | |
461 | \r | |
a86ae184 | 462 | [PcdsFeatureFlag]\r |
fe44bae5 SZ |
463 | ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r |
464 | # TRUE - Supports update capsule across a system reset.<BR>\r | |
465 | # FALSE - Does not support update capsule across a system reset.<BR>\r | |
466 | # @Prompt Enable update capsule across a system reset.\r | |
109e9a61 | 467 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r |
73850864 | 468 | \r |
fe44bae5 SZ |
469 | ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r |
470 | # TRUE - All PCD PPI services will be produced.<BR>\r | |
471 | # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r | |
472 | # @Prompt Enable full PEI PCD services.\r | |
f806dd27 LG |
473 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r |
474 | \r | |
fe44bae5 SZ |
475 | ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r |
476 | # It can be disabled to save size.<BR><BR>\r | |
477 | # TRUE - Device Path To Text Protocol will be produced.<BR>\r | |
478 | # FALSE - Device Path To Text Protocol will not be produced.<BR>\r | |
479 | # @Prompt Enable Device Path to Text support.\r | |
348c8131 | 480 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r |
73850864 | 481 | \r |
fe44bae5 SZ |
482 | ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r |
483 | # It can be disabled to save size.<BR><BR>\r | |
484 | # TRUE - Device Path From Text Protocol will be produced.<BR>\r | |
485 | # FALSE - Device Path From Text Protocol will not be produced.<BR>\r | |
486 | # @Prompt Enable Device Path From Text support.\r | |
348c8131 | 487 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r |
73850864 | 488 | \r |
fe44bae5 | 489 | ## Indicates if the statistics about variable usage will be collected. This information is\r |
fc9da5a6 | 490 | # stored as a vendor configuration table into the EFI system table.\r |
fe44bae5 SZ |
491 | # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r |
492 | # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r | |
493 | # TRUE - Statistics about variable usage will be collected.<BR>\r | |
494 | # FALSE - Statistics about variable usage will not be collected.<BR>\r | |
495 | # @Prompt Enable variable statistics collection.\r | |
33a5a666 | 496 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r |
73850864 | 497 | \r |
fe44bae5 SZ |
498 | ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r |
499 | # TRUE - Installs Unicode Collation Protocol.<BR>\r | |
500 | # FALSE - Does not install Unicode Collation Protocol.<BR>\r | |
501 | # @Prompt Enable Unicode Collation support.\r | |
ac12a167 | 502 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r |
73850864 | 503 | \r |
fe44bae5 SZ |
504 | ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r |
505 | # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r | |
506 | # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r | |
507 | # @Prompt Enable Unicode Collation 2 support.\r | |
ac12a167 | 508 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r |
73850864 | 509 | \r |
fe44bae5 SZ |
510 | ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
511 | # It could be set FALSE to save size.<BR><BR>\r | |
512 | # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r | |
513 | # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r | |
514 | # @Prompt Enable ConOut GOP support.\r | |
d0c64728 | 515 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r |
73850864 | 516 | \r |
fe44bae5 SZ |
517 | ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
518 | # It could be set FALSE to save size.<BR><BR>\r | |
519 | # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r | |
520 | # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r | |
521 | # @Prompt Enable ConOut UGA support.\r | |
d0c64728 | 522 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r |
73850864 | 523 | \r |
fe44bae5 SZ |
524 | ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r |
525 | # This PCD is used to tune PEI phase performance to reduce the search image time.\r | |
526 | # It can be set according to the generated image section type.<BR><BR>\r | |
527 | # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r | |
528 | # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r | |
529 | # @Prompt PeiCore search TE section first.\r | |
3076397e | 530 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r |
73850864 | 531 | \r |
fe44bae5 SZ |
532 | ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r |
533 | # interrupt to access usb device in the case of absence of usb stack.\r | |
534 | # DUET platform requires the token to be TRUE.<BR><BR>\r | |
535 | # TRUE - Turn off usb legacy support.<BR>\r | |
536 | # FALSE - Does not turn off usb legacy support.<BR>\r | |
35c77dae | 537 | # @Prompt Turn off USB legacy support.\r |
cc582cff | 538 | gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r |
8a2d4996 | 539 | \r |
fe44bae5 SZ |
540 | ## Indicates if HiiImageProtocol will be installed.\r |
541 | # FALSE is for size reduction.<BR><BR>\r | |
542 | # TRUE - Installs HiiImageProtocol.<BR>\r | |
543 | # FALSE - Does not install HiiImageProtocol.<BR>\r | |
544 | # @Prompt Enable HII image support.\r | |
813acf3a | 545 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r |
73850864 | 546 | \r |
fe44bae5 | 547 | ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r |
a8e1ed54 | 548 | # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r |
fe44bae5 SZ |
549 | # from HII database.<BR><BR>\r |
550 | # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r | |
551 | # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r | |
552 | # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r | |
813acf3a | 553 | gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r |
88f20127 | 554 | \r |
fe44bae5 SZ |
555 | ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r |
556 | # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r | |
557 | # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r | |
558 | # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r | |
559 | # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r | |
560 | # @Prompt Enable framework backward compatibility support.\r | |
f806dd27 | 561 | gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r |
73850864 | 562 | \r |
fe44bae5 SZ |
563 | ## Indicates if HelloWorld Application will print the verbose information.\r |
564 | # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r | |
565 | # TRUE - HelloWorld Application will print the verbose information.<BR>\r | |
566 | # FALSE - HelloWorld Application will not print the verbose information.<BR>\r | |
567 | # @Prompt Enable HelloWorld print.\r | |
223c22d8 | 568 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r |
41ad45c2 | 569 | \r |
fe44bae5 SZ |
570 | ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r |
571 | # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r | |
572 | # FALSE - Only FTW Write service is available.<BR>\r | |
573 | # @Prompt Enable FULL FTW services.\r | |
72670d3e | 574 | gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r |
575 | \r | |
fe44bae5 SZ |
576 | ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r |
577 | # TRUE - DXE IPL will support UEFI decompression.<BR>\r | |
578 | # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r | |
579 | # @Prompt Enable UEFI decompression support in DXE IPL.\r | |
72670d3e | 580 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r |
85e923a5 | 581 | \r |
fe44bae5 SZ |
582 | ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r |
583 | # TRUE - PciBus driver supports the hot plug device.<BR>\r | |
584 | # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r | |
585 | # @Prompt Enable PciBus hot plug device support.\r | |
9060e3ec | 586 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r |
587 | \r | |
fe44bae5 SZ |
588 | ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r |
589 | # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r | |
590 | # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r | |
591 | # @Prompt Enable PCI bridge IO alignment probe.\r | |
b3ec9b56 | 592 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r |
fe44bae5 SZ |
593 | \r |
594 | ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r | |
595 | # TRUE - Reports StatusCode via Serial port.<BR>\r | |
596 | # FALSE - Does not report StatusCode via Serial port.<BR>\r | |
597 | # @Prompt Enable StatusCode via Serial port.\r | |
10c5d87e | 598 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r |
599 | \r | |
fe44bae5 SZ |
600 | ## Indicates if StatusCode is stored in memory.\r |
601 | # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r | |
602 | # TRUE - Stores StatusCode in memory.<BR>\r | |
603 | # FALSE - Does not store StatusCode in memory.<BR>\r | |
604 | # @Prompt Enable StatusCode via memory.\r | |
10c5d87e | 605 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r |
606 | \r | |
fe44bae5 SZ |
607 | ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r |
608 | # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r | |
609 | # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r | |
610 | # @Prompt Enable PEI StatusCode replay in DXE phase\r | |
10c5d87e | 611 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r |
9060e3ec | 612 | \r |
fe44bae5 SZ |
613 | ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r |
614 | # TRUE - Installs ACPI SDT protocol.<BR>\r | |
615 | # FALSE - Does not install ACPI SDT protocol.<BR>\r | |
616 | # @Prompt Enable ACPI SDT support.\r | |
3dc8585e JY |
617 | gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r |
618 | \r | |
fe44bae5 SZ |
619 | ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r |
620 | # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r | |
621 | # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r | |
622 | # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r | |
623 | # @Prompt Enable unaligned PCI I/O support.\r | |
aeeb84ba | 624 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r |
11232773 | 625 | \r |
fe44bae5 SZ |
626 | ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r |
627 | # TRUE - TEXT statement will always be set to GrayOut.<BR>\r | |
628 | # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r | |
629 | # @Prompt Always GrayOut TEXT statement.\r | |
11232773 | 630 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r |
fe44bae5 SZ |
631 | \r |
632 | ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r | |
633 | # TRUE - The unselectable menu will be set to GrayOut.<BR>\r | |
634 | # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r | |
635 | # @Prompt GrayOut read only menu.\r | |
0777cea6 ED |
636 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r |
637 | \r | |
fe44bae5 SZ |
638 | ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r |
639 | # TRUE - Supports recovery from IDE disk.<BR>\r | |
640 | # FALSE - Does not support recovery from IDE disk.<BR>\r | |
641 | # @Prompt Enable recovery on IDE disk.\r | |
74ef1d42 | 642 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r |
643 | \r | |
fe44bae5 SZ |
644 | ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r |
645 | # TRUE - Supports recovery from FAT floppy disk.<BR>\r | |
646 | # FALSE - Does not support recovery from FAT floppy disk.<BR>\r | |
647 | # @Prompt Enable recovery on FAT floppy disk.\r | |
74ef1d42 | 648 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r |
649 | \r | |
fe44bae5 SZ |
650 | ## Indicates if recovery from data CD will be supported.<BR><BR>\r |
651 | # TRUE - Supports recovery from data CD.<BR>\r | |
652 | # FALSE - Does not support recovery from data CD.<BR>\r | |
653 | # @Prompt Enable recovery on data CD.\r | |
74ef1d42 | 654 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r |
655 | \r | |
fe44bae5 SZ |
656 | ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r |
657 | # TRUE - Supports recovery from USB disk.<BR>\r | |
658 | # FALSE - Does not support recovery from USB disk.<BR>\r | |
659 | # @Prompt Enable recovery on FAT USB disk.\r | |
74ef1d42 | 660 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r |
661 | \r | |
fe44bae5 SZ |
662 | ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r |
663 | # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r | |
664 | # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r | |
665 | # @Prompt Enable S3 performance data support.\r | |
0284e90c LG |
666 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r |
667 | \r | |
5d2311be | 668 | [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r |
fe44bae5 SZ |
669 | ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r |
670 | # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r | |
671 | # is built in firmware.<BR><BR>\r | |
672 | # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r | |
673 | # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r | |
674 | # @Prompt DxeIpl switch to long mode.\r | |
4e17cc90 | 675 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r |
676 | \r | |
fe44bae5 SZ |
677 | ## Indicates if DxeIpl should rebuild page tables. This flag only\r |
678 | # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r | |
679 | # TRUE - DxeIpl will rebuild page tables.<BR>\r | |
680 | # FALSE - DxeIpl will not rebuild page tables.<BR>\r | |
681 | # @Prompt DxeIpl rebuild page tables.\r | |
e47f0da4 | 682 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r |
683 | \r | |
a86ae184 | 684 | [PcdsFixedAtBuild]\r |
fe44bae5 SZ |
685 | ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r |
686 | # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r | |
687 | # 0: Disable the feature.<BR>\r | |
688 | # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r | |
689 | # @Prompt Enable LMFA feature.\r | |
690 | # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r | |
54ea99a7 | 691 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r |
d13e7bda | 692 | \r |
fe44bae5 SZ |
693 | ## Progress Code for OS Loader LoadImage start.<BR><BR>\r |
694 | # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r | |
695 | # @Prompt Progress Code for OS Loader LoadImage start.\r | |
696 | # @ValidList 0x80000003 | 0x03058000\r | |
eab90a61 | 697 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r |
698 | \r | |
fe44bae5 SZ |
699 | ## Progress Code for OS Loader StartImage start.<BR><BR>\r |
700 | # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r | |
701 | # @Prompt Progress Code for OS Loader StartImage start.\r | |
702 | # @ValidList 0x80000003 | 0x03058001\r | |
eab90a61 | 703 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r |
704 | \r | |
fe44bae5 SZ |
705 | ## Progress Code for S3 Suspend start.<BR><BR>\r |
706 | # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r | |
707 | # @Prompt Progress Code for S3 Suspend start.\r | |
708 | # @ValidList 0x80000003 | 0x03078000\r | |
eab90a61 | 709 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r |
710 | \r | |
fe44bae5 SZ |
711 | ## Progress Code for S3 Suspend end.<BR><BR>\r |
712 | # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r | |
713 | # @Prompt Progress Code for S3 Suspend end.\r | |
714 | # @ValidList 0x80000003 | 0x03078001\r | |
eab90a61 | 715 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r |
716 | \r | |
fe44bae5 SZ |
717 | ## Error Code for SetVariable failure.<BR><BR>\r |
718 | # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r | |
719 | # @Prompt Error Code for SetVariable failure.\r | |
720 | # @ValidList 0x80000006 | 0x03058002\r | |
69fc8f08 RN |
721 | gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r |
722 | \r | |
fe44bae5 SZ |
723 | [PcdsFixedAtBuild, PcdsPatchableInModule]\r |
724 | ## Dynamic type PCD can be registered callback function for Pcd setting action.\r | |
725 | # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r | |
726 | # for a dynamic PCD used in PEI phase.\r | |
727 | # @Prompt Max PEI PCD callback number per PCD entry.\r | |
728 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r | |
729 | \r | |
35c77dae | 730 | ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r |
adcd7381 | 731 | # to store PCD value.\r |
fe44bae5 | 732 | # @Prompt VPD base address.\r |
adcd7381 SZ |
733 | gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r |
734 | \r | |
fe781940 SZ |
735 | ## Maximum number of FV is supported by PeiCore's dispatching.\r |
736 | # @Prompt Maximum number of FV supported by PeiCore.\r | |
737 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r | |
738 | \r | |
739 | ## Maximum File count in every FV is supported by PeiCore's dispatching.\r | |
740 | # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r | |
741 | # @Prompt Maximum File count per FV supported by PeiCore.\r | |
742 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r | |
743 | \r | |
fe44bae5 SZ |
744 | ## Maximum stack size for PeiCore.\r |
745 | # @Prompt Maximum stack size for PeiCore.\r | |
746 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r | |
747 | \r | |
fe781940 SZ |
748 | ## Maximum PPI count is supported by PeiCore's PPI database.\r |
749 | # @Prompt Maximum PPI count supported by PeiCore.\r | |
750 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r | |
751 | \r | |
fe44bae5 SZ |
752 | ## The maximum size of a single non-HwErr type variable.\r |
753 | # @Prompt Maximum variable size.\r | |
754 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r | |
755 | \r | |
8457d0e7 SZ |
756 | ## The maximum size of a single authenticated variable.\r |
757 | # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r | |
758 | # @Prompt Maximum authenticated variable size.\r | |
759 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r | |
760 | \r | |
fe44bae5 SZ |
761 | ## The maximum size of single hardware error record variable.<BR><BR>\r |
762 | # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r | |
763 | # In IA64 platforms, this value should be larger than 128KB.<BR>\r | |
764 | # @Prompt Maximum HwErr variable size.\r | |
765 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r | |
766 | \r | |
4edb1866 | 767 | ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r |
fe44bae5 | 768 | # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r |
4edb1866 | 769 | # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r |
fe44bae5 SZ |
770 | # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r |
771 | # @Prompt HwErr variable storage size.\r | |
772 | gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r | |
773 | \r | |
4edb1866 SZ |
774 | ## The size of maximum user NV variable space.<BR><BR>\r |
775 | # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r | |
776 | # If the value is 0, it means user variable share the same NV storage with system variable,\r | |
777 | # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r | |
7cff4456 | 778 | # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r |
4edb1866 SZ |
779 | # otherwise the variable will be regarded as user variable.<BR>\r |
780 | # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r | |
781 | # 2) Variables managed by Variable driver internally.<BR>\r | |
782 | # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r | |
7cff4456 | 783 | # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r |
4edb1866 SZ |
784 | # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r |
785 | # @Prompt Maximum user NV variable space size.\r | |
786 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r | |
787 | \r | |
788 | ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r | |
789 | # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r | |
790 | # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r | |
791 | # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r | |
792 | # Then the common NV variable space size at boottime will be\r | |
793 | # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r | |
794 | # and the common NV variable space size at runtime will be\r | |
795 | # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r | |
796 | # @Prompt Boottime reserved NV variable space size.\r | |
797 | gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r | |
798 | \r | |
0fb5e515 SZ |
799 | ## Reclaim variable space at EndOfDxe.<BR><BR>\r |
800 | # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r | |
801 | # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r | |
802 | # @Prompt Reclaim variable space at EndOfDxe.\r | |
803 | gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r | |
804 | \r | |
fe44bae5 SZ |
805 | ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r |
806 | # @Prompt Variable storage size.\r | |
807 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r | |
808 | \r | |
809 | ## FFS filename to find the ACPI tables.\r | |
810 | # @Prompt FFS name of ACPI tables storage.\r | |
811 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r | |
812 | \r | |
813 | ## FFS filename to find the capsule coalesce image.\r | |
814 | # @Prompt FFS name of capsule coalesce image.\r | |
815 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r | |
816 | \r | |
35c77dae LG |
817 | ## Maximum number of performance log entries during PEI phase.\r |
818 | # @Prompt Maximum number of PEI performance log entries.\r | |
348c8131 | 819 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r |
4e17cc90 | 820 | \r |
fe44bae5 SZ |
821 | ## RTC Update Timeout Value(microsecond).\r |
822 | # @Prompt RTC Update Timeout Value.\r | |
4e17cc90 | 823 | gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r |
73850864 | 824 | \r |
fe44bae5 SZ |
825 | ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r |
826 | # TRUE - 16550 serial port registers are in MMIO space.<BR>\r | |
827 | # FALSE - 16550 serial port registers are in I/O space.<BR>\r | |
828 | # @Prompt Serial port registers use MMIO.\r | |
467d15ae | 829 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r |
fe44bae5 SZ |
830 | \r |
831 | ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r | |
832 | # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r | |
833 | # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r | |
834 | # @Prompt Enable serial port hardware flow control.\r | |
467d15ae | 835 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r |
836 | \r | |
fe44bae5 SZ |
837 | ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r |
838 | # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r | |
839 | # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r | |
840 | # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r | |
841 | # @Prompt Enable serial port cable detetion.\r | |
784ce127 | 842 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r |
843 | \r | |
fe44bae5 SZ |
844 | ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r |
845 | # @Prompt Base address of serial port registers.\r | |
467d15ae | 846 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r |
847 | \r | |
848 | ## Baud rate for the 16550 serial port. Default is 115200 baud.\r | |
fe44bae5 SZ |
849 | # @Prompt Baud rate for serial port.\r |
850 | # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r | |
467d15ae | 851 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r |
852 | \r | |
fe44bae5 SZ |
853 | ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r |
854 | # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r | |
855 | # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r | |
856 | # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r | |
857 | # BIT7..BIT6 - Reserved. Must be 0.<BR>\r | |
467d15ae | 858 | #\r |
fe44bae5 SZ |
859 | # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r |
860 | # @Prompt Serial port Line Control settings.\r | |
861 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r | |
467d15ae | 862 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r |
863 | \r | |
fe44bae5 SZ |
864 | ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r |
865 | # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r | |
866 | # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r | |
867 | # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r | |
868 | # BIT4..BIT3 - Reserved. Must be 0.<BR>\r | |
869 | # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r | |
870 | # BIT7..BIT6 - Reserved. Must be 0.<BR>\r | |
467d15ae | 871 | #\r |
fe44bae5 SZ |
872 | # Default is to enable and clear all FIFOs.<BR>\r |
873 | # @Prompt Serial port FIFO Control settings.\r | |
874 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r | |
467d15ae | 875 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r |
876 | \r | |
3ddcceea | 877 | ## This setting can override the default TFTP block size. A value of 0 computes\r |
878 | # the default from MTU information. A non-zero value will be used as block size\r | |
879 | # in bytes.\r | |
fe44bae5 SZ |
880 | # @Prompt TFTP block size.\r |
881 | gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r | |
882 | \r | |
6eea8eae | 883 | ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r |
fe44bae5 | 884 | # structure. The default value for this PCD is 0, which means that the DXE Core\r |
6eea8eae LG |
885 | # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r |
886 | # boundary as close to the top of memory as feasible. If this PCD is set to a \r | |
fe44bae5 | 887 | # value other than 0, then the DXE Core will first attempt to allocate the\r |
6eea8eae LG |
888 | # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r |
889 | # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r | |
890 | # boundary as close to the top of memory as feasible.\r | |
fe44bae5 | 891 | # @Prompt Maximum Efi System Table Pointer address.\r |
6eea8eae | 892 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r |
838a9c58 | 893 | \r |
fe44bae5 SZ |
894 | ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r |
895 | # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r | |
896 | # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r | |
897 | # @Prompt Shadow Peim On S3 Boot. \r | |
5d7f3126 LG |
898 | gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r |
899 | \r | |
3d44658c LG |
900 | ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r |
901 | # This PCD is used on other boot path except for S3 boot. \r | |
902 | # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r | |
903 | # FALSE - Not shadow PEIM after memory is ready.<BR>\r | |
904 | # @Prompt Shadow Peim and PeiCore on boot\r | |
905 | gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r | |
906 | \r | |
84edd20b SZ |
907 | ## The mask is used to control memory profile behavior.<BR><BR>\r |
908 | # BIT0 - Enable UEFI memory profile.<BR>\r | |
909 | # BIT1 - Enable SMRAM profile.<BR>\r | |
910 | # @Prompt Memory Profile Property.\r | |
911 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r | |
912 | gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r | |
913 | \r | |
914 | ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r | |
915 | # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r | |
916 | #\r | |
917 | # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r | |
918 | # EfiReservedMemoryType 0x0001<BR>\r | |
919 | # EfiLoaderCode 0x0002<BR>\r | |
920 | # EfiLoaderData 0x0004<BR>\r | |
921 | # EfiBootServicesCode 0x0008<BR>\r | |
922 | # EfiBootServicesData 0x0010<BR>\r | |
923 | # EfiRuntimeServicesCode 0x0020<BR>\r | |
924 | # EfiRuntimeServicesData 0x0040<BR>\r | |
925 | # EfiConventionalMemory 0x0080<BR>\r | |
926 | # EfiUnusableMemory 0x0100<BR>\r | |
927 | # EfiACPIReclaimMemory 0x0200<BR>\r | |
928 | # EfiACPIMemoryNVS 0x0400<BR>\r | |
929 | # EfiMemoryMappedIO 0x0800<BR>\r | |
930 | # EfiMemoryMappedIOPortSpace 0x1000<BR>\r | |
931 | # EfiPalCode 0x2000<BR>\r | |
8f2f2f19 | 932 | # EfiPersistentMemory 0x4000<BR>\r |
db9b00f1 | 933 | # OEM Reserved 0x4000000000000000<BR>\r |
84edd20b SZ |
934 | # OS Reserved 0x8000000000000000<BR>\r |
935 | #\r | |
936 | # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r | |
937 | #\r | |
938 | # @Prompt Memory profile memory type.\r | |
939 | gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r | |
940 | \r | |
31122d8c LG |
941 | ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r |
942 | # information that describes the path that contains zero or more PCI to PCI briges \r | |
943 | # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r | |
944 | # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r | |
945 | # and the last two bytes are the offset to the PCI power management capabilities \r | |
946 | # register used to manage the D0-D3 states. If a PCI power management capabilities \r | |
947 | # register is not present, then the last two bytes in the offset is set to 0. The \r | |
948 | # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r | |
949 | # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r | |
950 | # @Prompt Pci Serial Device Info\r | |
951 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r | |
952 | \r | |
953 | ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r | |
35c77dae | 954 | # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r |
31122d8c | 955 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r |
8d51e87d | 956 | \r |
1d112229 RN |
957 | ## This PCD points to the file name GUID of the BootManagerMenuApp\r |
958 | # Platform can customize the PCD to point to different application for Boot Manager Menu\r | |
a9890ea5 | 959 | # @Prompt Boot Manager Menu File\r |
1d112229 RN |
960 | gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r |
961 | \r | |
962 | ## This PCD points to the formset GUID of the driver health management form\r | |
963 | # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r | |
964 | # Platform can customize the PCD to point to different formset.\r | |
a9890ea5 | 965 | # @Prompt Driver Health Management Form\r |
1d112229 RN |
966 | gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r |
967 | \r | |
cd68e4a8 MK |
968 | ## The number of bytes between registers in serial device. The default is 1 byte.\r |
969 | # @Prompt Serial Port Register Stride in Bytes\r | |
1eb904a6 | 970 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r |
5630cdfe | 971 | \r |
1241af95 SZ |
972 | ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r |
973 | # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r | |
974 | # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r | |
975 | # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r | |
976 | gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r | |
977 | \r | |
be046357 | 978 | [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r |
fe44bae5 SZ |
979 | ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r |
980 | # This PCD could be set to 0 then console output would be at max column and max row.\r | |
981 | # @Prompt Console output row.\r | |
4bfa7dc4 | 982 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r |
73850864 | 983 | \r |
60d73737 | 984 | ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r |
fe44bae5 SZ |
985 | # This PCD could be set to 0 then console output would be at max column and max row.\r |
986 | # @Prompt Console output column.\r | |
4e17cc90 | 987 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r |
73850864 | 988 | \r |
b9b5e307 | 989 | ## This PCD defines the video horizontal resolution.\r |
fe44bae5 SZ |
990 | # If this PCD is set to 0 then video resolution would be at highest resolution.\r |
991 | # @Prompt Video horizontal resolution.\r | |
b9b5e307 | 992 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r |
993 | \r | |
994 | ## This PCD defines the video vertical resolution.\r | |
fe44bae5 SZ |
995 | # If this PCD is set to 0 then video resolution would be at highest resolution.\r |
996 | # @Prompt Video vertical resolution.\r | |
b9b5e307 | 997 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r |
998 | \r | |
4e5c0d12 RN |
999 | # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r |
1000 | # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r | |
1001 | # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r | |
1002 | # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r | |
1003 | # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r | |
1004 | # for text setup.\r | |
1005 | \r | |
1006 | ## Specify the video horizontal resolution of text setup.\r | |
1007 | # @Prompt Video Horizontal Resolution of Text Setup\r | |
1008 | gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r | |
1009 | \r | |
1010 | ## Specify the video vertical resolution of text setup.\r | |
1011 | # @Prompt Video Vertical Resolution of Text Setup\r | |
1012 | gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r | |
1013 | \r | |
1014 | ## Specify the console output column of text setup.\r | |
1015 | # @Prompt Console Output Column of Text Setup\r | |
1016 | gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r | |
1017 | \r | |
1018 | ## Specify the console output row of text setup.\r | |
1019 | # @Prompt Console Output Row of Text Setup\r | |
1020 | gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r | |
1021 | \r | |
fe44bae5 | 1022 | [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r |
b2a41b1e RN |
1023 | ## UART clock frequency is for the baud rate configuration.\r |
1024 | # @Prompt Serial Port Clock Rate.\r | |
1025 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r | |
1026 | \r | |
5e30b69e DB |
1027 | ## This PCD points to the front page formset GUID\r |
1028 | # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r | |
a9890ea5 | 1029 | # @Prompt Front Page Formset.\r |
5e30b69e DB |
1030 | gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r |
1031 | \r | |
fe44bae5 SZ |
1032 | ## Base address of the NV variable range in flash device.\r |
1033 | # @Prompt Base address of flash NV variable range.\r | |
a86ae184 | 1034 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r |
73850864 | 1035 | \r |
fe44bae5 SZ |
1036 | ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r |
1037 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r | |
1038 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
1039 | # be reflushed through the manner of fault tolerant write.\r | |
1040 | # @Prompt Size of flash NV variable range.\r | |
1041 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r | |
1042 | \r | |
2c4b18e0 | 1043 | ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r |
fe44bae5 | 1044 | # @Prompt Base address of flash FTW spare block range.\r |
73850864 | 1045 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r |
1046 | \r | |
fe44bae5 SZ |
1047 | ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r |
1048 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r | |
1049 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
1050 | # be reflushed through the manner of fault tolerant write.\r | |
1051 | # @Prompt Size of flash FTW spare block range.\r | |
1052 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r | |
1053 | \r | |
a86ae184 | 1054 | ## Base address of the FTW working block range in flash device.\r |
0d3edd9d | 1055 | # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r |
fe44bae5 | 1056 | # @Prompt Base address of flash FTW working block range.\r |
73850864 | 1057 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r |
1058 | \r | |
fe44bae5 | 1059 | ## Size of the FTW working block range.\r |
0d3edd9d SZ |
1060 | # If the value is less than one block size, the work space range should not span blocks.\r |
1061 | # If the value is larger than one block size, it should be block size aligned.\r | |
fe44bae5 SZ |
1062 | # @Prompt Size of flash FTW working block range.\r |
1063 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r | |
1064 | \r | |
1065 | ## 64-bit Base address of the NV variable range in flash device.\r | |
1066 | # @Prompt 64-bit Base address of flash NV variable range.\r | |
92a4f6f3 | 1067 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r |
1068 | \r | |
2c4b18e0 | 1069 | ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r |
fe44bae5 | 1070 | # @Prompt 64-bit Base address of flash FTW spare block range.\r |
92a4f6f3 | 1071 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r |
1072 | \r | |
1073 | ## 64-bit Base address of the FTW working block range in flash device.\r | |
0d3edd9d | 1074 | # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r |
fe44bae5 | 1075 | # @Prompt 64-bit Base address of flash FTW working block range.\r |
92a4f6f3 | 1076 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r |
1077 | \r | |
fe44bae5 SZ |
1078 | ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r |
1079 | # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r | |
1080 | # @Prompt Reserved memory range for EMU variable NV storage.\r | |
02328a57 | 1081 | gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r |
1082 | \r | |
a90ccab8 | 1083 | ## This PCD defines the times to print hello world string.\r |
fe44bae5 SZ |
1084 | # This PCD is a sample to explain UINT32 PCD usage.\r |
1085 | # @Prompt HellowWorld print times.\r | |
4e17cc90 | 1086 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r |
b7d286b6 | 1087 | \r |
fe44bae5 SZ |
1088 | ## This PCD defines the HelloWorld print string.\r |
1089 | # This PCD is a sample to explain String typed PCD usage.\r | |
1090 | # @Prompt HelloWorld print string.\r | |
1091 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r | |
1092 | \r | |
1093 | ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r | |
73850864 | 1094 | # The default max size is 100MB (0x6400000) for more than one large capsule images.\r |
fe44bae5 | 1095 | # @Prompt Max size of populated capsule.\r |
4e17cc90 | 1096 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r |
73850864 | 1097 | \r |
fe44bae5 | 1098 | ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r |
0ef42f88 | 1099 | # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r |
fe44bae5 | 1100 | # @Prompt Max size of non-populated capsule.\r |
4e17cc90 | 1101 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r |
6144e7af | 1102 | \r |
fe44bae5 SZ |
1103 | ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r |
1104 | # @Prompt Firmware vendor.\r | |
e026f005 | 1105 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r |
73850864 | 1106 | \r |
fe44bae5 SZ |
1107 | ## Firmware revision that is the default revision filled into the EFI System Table.\r |
1108 | # @Prompt Firmware revision.\r | |
6144e7af | 1109 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r |
1110 | \r | |
fe44bae5 SZ |
1111 | ## Null-terminated Unicode string that describes the firmware version.\r |
1112 | # @Prompt Firmware version string.\r | |
73850864 | 1113 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r |
1114 | \r | |
fe44bae5 SZ |
1115 | ## Null-terminated Unicode string that contains the date the firmware was released\r |
1116 | # @Prompt Firmware release data string.\r | |
6144e7af | 1117 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r |
1118 | \r | |
fe44bae5 SZ |
1119 | ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r |
1120 | # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r | |
1121 | # The default value in PeiPhase is 1 KBytes.<BR>\r | |
1122 | # The default value in DxePhase is 128 KBytes.<BR>\r | |
1123 | # @Prompt StatusCode memory size.\r | |
10c5d87e | 1124 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r |
1125 | \r | |
fe44bae5 SZ |
1126 | ## Indicates if to reset system when memory type information changes.<BR><BR>\r |
1127 | # TRUE - Resets system when memory type information changes.<BR>\r | |
1128 | # FALSE - Does not reset system when memory type information changes.<BR>\r | |
1129 | # @Prompt Reset on memory type information change.\r | |
dad63934 RN |
1130 | gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r |
1131 | \r | |
f0a1bf11 | 1132 | ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r |
fe44bae5 SZ |
1133 | # Only following values defined in UEFI specification are valid:<BR><BR>\r |
1134 | # 0x00 (EFI_BLACK)<BR>\r | |
1135 | # 0x01 (EFI_BLUE)<BR>\r | |
1136 | # 0x02 (EFI_GREEN)<BR>\r | |
1137 | # 0x03 (EFI_CYAN)<BR>\r | |
1138 | # 0x04 (EFI_RED)<BR>\r | |
1139 | # 0x05 (EFI_MAGENTA)<BR>\r | |
1140 | # 0x06 (EFI_BROWN)<BR>\r | |
1141 | # 0x07 (EFI_LIGHTGRAY)<BR>\r | |
1142 | # 0x08 (EFI_DARKGRAY)<BR>\r | |
1143 | # 0x09 (EFI_LIGHTBLUE)<BR>\r | |
1144 | # 0x0A (EFI_LIGHTGREEN)<BR>\r | |
1145 | # 0x0B (EFI_LIGHTCYAN)<BR>\r | |
1146 | # 0x0C (EFI_LIGHTRED)<BR>\r | |
1147 | # 0x0D (EFI_LIGHTMAGENTA)<BR>\r | |
1148 | # 0x0E (EFI_YELLOW)<BR>\r | |
1149 | # 0x0F (EFI_WHITE)<BR>\r | |
1150 | # @Prompt Foreground color for browser subtile.\r | |
1151 | # @ValidRange 0x80000004 | 0x00 - 0x0F\r | |
f0a1bf11 LG |
1152 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r |
1153 | \r | |
1154 | ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r | |
fe44bae5 SZ |
1155 | # Only following values defined in UEFI specification are valid:<BR><BR>\r |
1156 | # 0x00 (EFI_BLACK)<BR>\r | |
1157 | # 0x01 (EFI_BLUE)<BR>\r | |
1158 | # 0x02 (EFI_GREEN)<BR>\r | |
1159 | # 0x03 (EFI_CYAN)<BR>\r | |
1160 | # 0x04 (EFI_RED)<BR>\r | |
1161 | # 0x05 (EFI_MAGENTA)<BR>\r | |
1162 | # 0x06 (EFI_BROWN)<BR>\r | |
1163 | # 0x07 (EFI_LIGHTGRAY)<BR>\r | |
1164 | # 0x08 (EFI_DARKGRAY)<BR>\r | |
1165 | # 0x09 (EFI_LIGHTBLUE)<BR>\r | |
1166 | # 0x0A (EFI_LIGHTGREEN)<BR>\r | |
1167 | # 0x0B (EFI_LIGHTCYAN)<BR>\r | |
1168 | # 0x0C (EFI_LIGHTRED)<BR>\r | |
1169 | # 0x0D (EFI_LIGHTMAGENTA)<BR>\r | |
1170 | # 0x0E (EFI_YELLOW)<BR>\r | |
1171 | # 0x0F (EFI_WHITE)<BR>\r | |
1172 | # @Prompt Foreground color for browser field.\r | |
1173 | # @ValidRange 0x80000004 | 0x00 - 0x0F\r | |
f0a1bf11 LG |
1174 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r |
1175 | \r | |
1176 | ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r | |
fe44bae5 SZ |
1177 | # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r |
1178 | # 0x00 (EFI_BLACK)<BR>\r | |
1179 | # 0x01 (EFI_BLUE)<BR>\r | |
1180 | # 0x02 (EFI_GREEN)<BR>\r | |
1181 | # 0x03 (EFI_CYAN)<BR>\r | |
1182 | # 0x04 (EFI_RED)<BR>\r | |
1183 | # 0x05 (EFI_MAGENTA)<BR>\r | |
1184 | # 0x06 (EFI_BROWN)<BR>\r | |
1185 | # 0x07 (EFI_LIGHTGRAY)<BR>\r | |
1186 | # 0x08 (EFI_DARKGRAY)<BR>\r | |
1187 | # 0x09 (EFI_LIGHTBLUE)<BR>\r | |
1188 | # 0x0A (EFI_LIGHTGREEN)<BR>\r | |
1189 | # 0x0B (EFI_LIGHTCYAN)<BR>\r | |
1190 | # 0x0C (EFI_LIGHTRED)<BR>\r | |
1191 | # 0x0D (EFI_LIGHTMAGENTA)<BR>\r | |
1192 | # 0x0E (EFI_YELLOW)<BR>\r | |
1193 | # 0x0F (EFI_WHITE)<BR>\r | |
1194 | # @Prompt Foreground color for highlighted browser field.\r | |
1195 | # @ValidRange 0x80000004 | 0x00 - 0x0F\r | |
f0a1bf11 LG |
1196 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r |
1197 | \r | |
1198 | ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r | |
fe44bae5 SZ |
1199 | # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r |
1200 | # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r | |
1201 | # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r | |
1202 | # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r | |
1203 | # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r | |
1204 | # 0x40 (EFI_BACKGROUND_RED)<BR>\r | |
1205 | # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r | |
1206 | # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r | |
1207 | # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r | |
1208 | # @Prompt Background color for highlighted browser field.\r | |
1209 | # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r | |
f0a1bf11 LG |
1210 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r |
1211 | \r | |
ea060cfa | 1212 | ## Time in second to delay for SATA devices to spin-up for recovery.\r |
fe44bae5 | 1213 | # @Prompt SATA spin-up delay time in second for recovery path.\r |
ea060cfa | 1214 | gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r |
1215 | \r | |
960f2d53 SZ |
1216 | ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r |
1217 | # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r | |
1218 | # When changing the value of this PCD, the platform developer should make sure the memory size is\r | |
1219 | # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r | |
fe44bae5 | 1220 | # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r |
88d20adc | 1221 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r |
1222 | \r | |
ab7017fe | 1223 | ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r |
fe44bae5 SZ |
1224 | # The default size is 32K. When changing the value of this PCD, the platform developer should\r |
1225 | # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r | |
1226 | # @Prompt Stack size for CapsulePei transfer to long mode.\r | |
6bea3336 | 1227 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r |
ab7017fe | 1228 | \r |
fe44bae5 SZ |
1229 | ## Indicates if 1G page table will be enabled.<BR><BR>\r |
1230 | # TRUE - 1G page table will be enabled.<BR>\r | |
1231 | # FALSE - 1G page table will not be enabled.<BR>\r | |
1232 | # @Prompt Enable 1G page table support.\r | |
3ecd0155 JY |
1233 | gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r |
1234 | \r | |
fe44bae5 SZ |
1235 | ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r |
1236 | # TRUE - Single Root I/O virtualization is supported.<BR>\r | |
1237 | # FALSE - Single Root I/O virtualization is not supported.<BR>\r | |
1238 | # @Prompt Enable SRIOV support.\r | |
1239 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r | |
1240 | \r | |
1241 | ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r | |
1242 | # TRUE - Alternative Routing-ID is supported.<BR>\r | |
1243 | # FALSE - Alternative Routing-ID is not supported.<BR>\r | |
1244 | # @Prompt Enable ARI support.\r | |
1245 | gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r | |
1246 | \r | |
1247 | ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r | |
1248 | # TRUE - Multi Root I/O virtualization is supported.<BR>\r | |
1249 | # FALSE - Multi Root I/O virtualization is not supported.<BR>\r | |
1250 | # @Prompt Enable MRIOV support.\r | |
1251 | gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r | |
1252 | \r | |
1253 | ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r | |
1254 | # BITN set indicates 2 of n+12 power<BR>\r | |
1255 | # BIT0 set indicates 4KB alignment<BR>\r | |
1256 | # BIT1 set indicates 8KB alignment<BR>\r | |
1257 | # @Prompt SRIOV system page size.\r | |
1258 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r | |
1259 | \r | |
35c77dae LG |
1260 | ## SMBIOS version.\r |
1261 | # @Prompt SMBIOS version.\r | |
54753b60 | 1262 | gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055\r |
fe781940 | 1263 | \r |
e63f3308 EL |
1264 | ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r |
1265 | # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r | |
1266 | gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A\r | |
1267 | \r | |
1268 | ## SMBIOS produce method.\r | |
1269 | # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r | |
1270 | # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r | |
1271 | # @Prompt The policy to produce SMBIOS entry point and table.\r | |
1272 | gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r | |
1273 | \r | |
fe44bae5 SZ |
1274 | ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r |
1275 | # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r | |
1276 | # @Prompt Pad size for extension FPDT boot records.\r | |
1c0cc375 LG |
1277 | gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r |
1278 | \r | |
fe44bae5 SZ |
1279 | ## Indicates if ConIn device are connected on demand.<BR><BR>\r |
1280 | # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r | |
1281 | # by Consplitter should be called before any real key read operation.<BR>\r | |
1282 | # FALSE - ConIn device may be connected normally during BDS.<BR>\r | |
1283 | # @Prompt ConIn connect on demand.\r | |
838a9c58 | 1284 | gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r |
1285 | \r | |
fe44bae5 SZ |
1286 | ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r |
1287 | # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r | |
1288 | # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r | |
1289 | # @Prompt Enable ATA S.M.A.R.T feature.\r | |
0e185864 | 1290 | gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r |
1291 | \r | |
fe44bae5 SZ |
1292 | ## Indicates if full PCI enumeration is disabled.<BR><BR>\r |
1293 | # TRUE - Full PCI enumeration is disabled.<BR>\r | |
1294 | # FALSE - Full PCI enumeration is not disabled.<BR>\r | |
1295 | # @Prompt Disable full PCI enumeration.\r | |
5624a27d WL |
1296 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r |
1297 | \r | |
fe44bae5 | 1298 | ## Disk I/O - Number of Data Buffer block.\r |
e645bd85 | 1299 | # Define the size in block of the pre-allocated buffer. It provide better\r |
fe44bae5 SZ |
1300 | # performance for large Disk I/O requests.\r |
1301 | # @Prompt Disk I/O - Number of Data Buffer block.\r | |
e645bd85 OM |
1302 | gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r |
1303 | \r | |
0591696e FT |
1304 | ## This PCD specifies the PCI-based UFS host controller mmio base address.\r |
1305 | # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r | |
1306 | # host controllers, their mmio base addresses are calculated one by one from this base address.\r | |
1307 | # @Prompt Mmio base address of pci-based UFS host controller.\r | |
1308 | gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r | |
1309 | \r | |
8d51e87d CZ |
1310 | ## Specify Max ESRT cache entry number supported for FMP instances\r |
1311 | #\r | |
1312 | # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r | |
1313 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r | |
1314 | \r | |
1315 | ## Specify Max ESRT cache entry number supported for Non FMP instances\r | |
1316 | #\r | |
1317 | # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r | |
1318 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r | |
1319 | \r | |
1320 | ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r | |
1321 | #\r | |
1322 | # @Prompt Flag to request system reboot after processing capsule.\r | |
1323 | gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r | |
1324 | \r | |
03d486b2 JY |
1325 | ## Publish PropertiesTable or not.\r |
1326 | #\r | |
1327 | # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r | |
1328 | # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r | |
1329 | # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r | |
1330 | # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r | |
1331 | # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r | |
1332 | #\r | |
1333 | # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r | |
1334 | # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r | |
1335 | # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r | |
1336 | # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r | |
1337 | # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r | |
1338 | # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r | |
1339 | #\r | |
1340 | # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r | |
1341 | # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r | |
1342 | # section. If PE code/data sections are merged, the result is unpredictable.\r | |
1343 | #\r | |
1344 | # @Prompt Publish UEFI PropertiesTable.\r | |
bc31c0c6 | 1345 | gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r |
03d486b2 | 1346 | \r |
f096950d SZ |
1347 | ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r |
1348 | # @Prompt Default OEM ID for ACPI table creation.\r | |
1349 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r | |
1350 | \r | |
1351 | ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r | |
1352 | # @Prompt Default OEM Table ID for ACPI table creation.\r | |
1353 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r | |
1354 | \r | |
1355 | ## Default OEM Revision for ACPI table creation.\r | |
1356 | # @Prompt Default OEM Revision for ACPI table creation.\r | |
1357 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r | |
1358 | \r | |
1359 | ## Default Creator ID for ACPI table creation.\r | |
1360 | # @Prompt Default Creator ID for ACPI table creation.\r | |
1361 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r | |
1362 | \r | |
1363 | ## Default Creator Revision for ACPI table creation.\r | |
1364 | # @Prompt Default Creator Revision for ACPI table creation.\r | |
1365 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r | |
1366 | \r | |
901c58c5 LE |
1367 | ## Indicates if to set NX for stack.<BR><BR>\r |
1368 | # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r | |
1369 | # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r | |
1370 | # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r | |
1371 | # TRUE - to set NX for stack.<BR>\r | |
1372 | # FALSE - Not to set NX for stack.<BR>\r | |
1373 | # @Prompt Set NX for stack.\r | |
1374 | gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r | |
1375 | \r | |
097e8d68 | 1376 | [PcdsPatchableInModule]\r |
fe44bae5 SZ |
1377 | ## Specify memory size with page number for PEI code when\r |
1378 | # Loading Module at Fixed Address feature is enabled.\r | |
1379 | # The value will be set by the build tool.\r | |
1380 | # @Prompt LMFA PEI code page number.\r | |
1381 | # @ValidList 0x80000001 | 0\r | |
54ea99a7 | 1382 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r |
1383 | \r | |
fe44bae5 SZ |
1384 | ## Specify memory size with page number for DXE boot time code when\r |
1385 | # Loading Module at Fixed Address feature is enabled.\r | |
1386 | # The value will be set by the build tool.\r | |
1387 | # @Prompt LMFA DXE boot code page number.\r | |
1388 | # @ValidList 0x80000001 | 0\r | |
54ea99a7 | 1389 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r |
1390 | \r | |
fe44bae5 SZ |
1391 | ## Specify memory size with page number for DXE runtime code when\r |
1392 | # Loading Module at Fixed Address feature is enabled.\r | |
1393 | # The value will be set by the build tool.\r | |
1394 | # @Prompt LMFA DXE runtime code page number.\r | |
1395 | # @ValidList 0x80000001 | 0\r | |
54ea99a7 | 1396 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r |
1397 | \r | |
fe44bae5 SZ |
1398 | ## Specify memory size with page number for SMM code when\r |
1399 | # Loading Module at Fixed Address feature is enabled.\r | |
1400 | # The value will be set by the build tool.\r | |
1401 | # @Prompt LMFA SMM code page number.\r | |
1402 | # @ValidList 0x80000001 | 0\r | |
54ea99a7 | 1403 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r |
1404 | \r | |
88d20adc | 1405 | [PcdsDynamic, PcdsDynamicEx]\r |
1406 | ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r | |
1407 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r | |
1408 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r | |
1409 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r | |
fe44bae5 SZ |
1410 | # @Prompt S3 Boot Script Table Private Data pointer.\r |
1411 | # @ValidList 0x80000001 | 0x0\r | |
88d20adc | 1412 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r |
1413 | \r | |
3aa764ed SZ |
1414 | ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r |
1415 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r | |
1416 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r | |
1417 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r | |
fe44bae5 SZ |
1418 | # @Prompt S3 Boot Script Table Private Smm Data pointer.\r |
1419 | # @ValidList 0x80000001 | 0x0\r | |
3aa764ed SZ |
1420 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r |
1421 | \r | |
b5040e4c EL |
1422 | ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 \r |
1423 | # Virtual to Physical mapping according to the processor physical address bits.\r | |
fe44bae5 SZ |
1424 | # @Prompt Identify Mapping Page Table pointer.\r |
1425 | # @ValidList 0x80000001 | 0x0\r | |
b5040e4c | 1426 | gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r |
fe44bae5 SZ |
1427 | \r |
1428 | [UserExtensions.TianoCore."ExtraFiles"]\r | |
1429 | MdeModulePkgExtra.uni\r |