]>
Commit | Line | Data |
---|---|---|
6e4c46c4 DC |
1 | [[qm_pci_passthrough]] |
2 | PCI(e) Passthrough | |
3 | ------------------ | |
e582833b DC |
4 | ifdef::wiki[] |
5 | :pve-toplevel: | |
6 | endif::wiki[] | |
6e4c46c4 DC |
7 | |
8 | PCI(e) passthrough is a mechanism to give a virtual machine control over | |
49f20f1b TL |
9 | a PCI device from the host. This can have some advantages over using |
10 | virtualized hardware, for example lower latency, higher performance, or more | |
11 | features (e.g., offloading). | |
6e4c46c4 | 12 | |
49f20f1b | 13 | But, if you pass through a device to a virtual machine, you cannot use that |
6e4c46c4 DC |
14 | device anymore on the host or in any other VM. |
15 | ||
16 | General Requirements | |
17 | ~~~~~~~~~~~~~~~~~~~~ | |
18 | ||
19 | Since passthrough is a feature which also needs hardware support, there are | |
49f20f1b TL |
20 | some requirements to check and preparations to be done to make it work. |
21 | ||
6e4c46c4 DC |
22 | |
23 | Hardware | |
24 | ^^^^^^^^ | |
49f20f1b TL |
25 | Your hardware needs to support `IOMMU` (*I*/*O* **M**emory **M**anagement |
26 | **U**nit) interrupt remapping, this includes the CPU and the mainboard. | |
6e4c46c4 | 27 | |
49f20f1b TL |
28 | Generally, Intel systems with VT-d, and AMD systems with AMD-Vi support this. |
29 | But it is not guaranteed that everything will work out of the box, due | |
30 | to bad hardware implementation and missing or low quality drivers. | |
6e4c46c4 | 31 | |
49f20f1b | 32 | Further, server grade hardware has often better support than consumer grade |
6e4c46c4 DC |
33 | hardware, but even then, many modern system can support this. |
34 | ||
49f20f1b | 35 | Please refer to your hardware vendor to check if they support this feature |
a22d7c24 | 36 | under Linux for your specific setup. |
49f20f1b | 37 | |
6e4c46c4 DC |
38 | |
39 | Configuration | |
40 | ^^^^^^^^^^^^^ | |
41 | ||
49f20f1b TL |
42 | Once you ensured that your hardware supports passthrough, you will need to do |
43 | some configuration to enable PCI(e) passthrough. | |
6e4c46c4 | 44 | |
6e4c46c4 | 45 | |
39d84f28 | 46 | .IOMMU |
6e4c46c4 | 47 | |
1748211a | 48 | The IOMMU has to be activated on the |
69055103 | 49 | xref:sysboot_edit_kernel_cmdline[kernel commandline]. |
1748211a SI |
50 | |
51 | The command line parameters are: | |
6e4c46c4 | 52 | |
49f20f1b TL |
53 | * for Intel CPUs: |
54 | + | |
55 | ---- | |
56 | intel_iommu=on | |
57 | ---- | |
58 | * for AMD CPUs: | |
59 | + | |
60 | ---- | |
6e4c46c4 | 61 | amd_iommu=on |
49f20f1b | 62 | ---- |
6e4c46c4 | 63 | |
6e4c46c4 | 64 | |
39d84f28 | 65 | .Kernel Modules |
6e4c46c4 | 66 | |
49f20f1b TL |
67 | You have to make sure the following modules are loaded. This can be achieved by |
68 | adding them to `'/etc/modules'' | |
6e4c46c4 | 69 | |
49f20f1b | 70 | ---- |
6e4c46c4 DC |
71 | vfio |
72 | vfio_iommu_type1 | |
73 | vfio_pci | |
74 | vfio_virqfd | |
49f20f1b | 75 | ---- |
6e4c46c4 | 76 | |
49f20f1b | 77 | [[qm_pci_passthrough_update_initramfs]] |
6e4c46c4 | 78 | After changing anything modules related, you need to refresh your |
49f20f1b | 79 | `initramfs`. On {pve} this can be done by executing: |
6e4c46c4 DC |
80 | |
81 | ---- | |
49f20f1b | 82 | # update-initramfs -u -k all |
6e4c46c4 DC |
83 | ---- |
84 | ||
39d84f28 | 85 | .Finish Configuration |
49f20f1b TL |
86 | |
87 | Finally reboot to bring the changes into effect and check that it is indeed | |
88 | enabled. | |
6e4c46c4 DC |
89 | |
90 | ---- | |
5e235b99 | 91 | # dmesg | grep -e DMAR -e IOMMU -e AMD-Vi |
6e4c46c4 DC |
92 | ---- |
93 | ||
49f20f1b TL |
94 | should display that `IOMMU`, `Directed I/O` or `Interrupt Remapping` is |
95 | enabled, depending on hardware and kernel the exact message can vary. | |
6e4c46c4 DC |
96 | |
97 | It is also important that the device(s) you want to pass through | |
49f20f1b | 98 | are in a *separate* `IOMMU` group. This can be checked with: |
6e4c46c4 DC |
99 | |
100 | ---- | |
49f20f1b | 101 | # find /sys/kernel/iommu_groups/ -type l |
6e4c46c4 DC |
102 | ---- |
103 | ||
49f20f1b | 104 | It is okay if the device is in an `IOMMU` group together with its functions |
6e4c46c4 DC |
105 | (e.g. a GPU with the HDMI Audio device) or with its root port or PCI(e) bridge. |
106 | ||
107 | .PCI(e) slots | |
108 | [NOTE] | |
109 | ==== | |
49f20f1b TL |
110 | Some platforms handle their physical PCI(e) slots differently. So, sometimes |
111 | it can help to put the card in a another PCI(e) slot, if you do not get the | |
112 | desired `IOMMU` group separation. | |
6e4c46c4 DC |
113 | ==== |
114 | ||
115 | .Unsafe interrupts | |
116 | [NOTE] | |
117 | ==== | |
118 | For some platforms, it may be necessary to allow unsafe interrupts. | |
49f20f1b TL |
119 | For this add the following line in a file ending with `.conf' file in |
120 | */etc/modprobe.d/*: | |
6e4c46c4 | 121 | |
49f20f1b | 122 | ---- |
6e4c46c4 | 123 | options vfio_iommu_type1 allow_unsafe_interrupts=1 |
49f20f1b | 124 | ---- |
6e4c46c4 DC |
125 | |
126 | Please be aware that this option can make your system unstable. | |
127 | ==== | |
128 | ||
082b32fb TL |
129 | GPU Passthrough Notes |
130 | ^^^^^^^^^^^^^^^^^^^^^ | |
13cae0c1 | 131 | |
082b32fb TL |
132 | It is not possible to display the frame buffer of the GPU via NoVNC or SPICE on |
133 | the {pve} web interface. | |
13cae0c1 | 134 | |
082b32fb TL |
135 | When passing through a whole GPU or a vGPU and graphic output is wanted, one |
136 | has to either physically connect a monitor to the card, or configure a remote | |
137 | desktop software (for example, VNC or RDP) inside the guest. | |
13cae0c1 | 138 | |
082b32fb TL |
139 | If you want to use the GPU as a hardware accelerator, for example, for |
140 | programs using OpenCL or CUDA, this is not required. | |
13cae0c1 | 141 | |
49f20f1b | 142 | Host Device Passthrough |
6e4c46c4 DC |
143 | ~~~~~~~~~~~~~~~~~~~~~~~ |
144 | ||
145 | The most used variant of PCI(e) passthrough is to pass through a whole | |
49f20f1b TL |
146 | PCI(e) card, for example a GPU or a network card. |
147 | ||
6e4c46c4 DC |
148 | |
149 | Host Configuration | |
150 | ^^^^^^^^^^^^^^^^^^ | |
151 | ||
49f20f1b TL |
152 | In this case, the host cannot use the card. There are two methods to achieve |
153 | this: | |
6e4c46c4 | 154 | |
49f20f1b TL |
155 | * pass the device IDs to the options of the 'vfio-pci' modules by adding |
156 | + | |
157 | ---- | |
6e4c46c4 | 158 | options vfio-pci ids=1234:5678,4321:8765 |
6e4c46c4 | 159 | ---- |
49f20f1b TL |
160 | + |
161 | to a .conf file in */etc/modprobe.d/* where `1234:5678` and `4321:8765` are | |
162 | the vendor and device IDs obtained by: | |
163 | + | |
164 | ---- | |
165 | # lcpci -nn | |
6e4c46c4 DC |
166 | ---- |
167 | ||
49f20f1b TL |
168 | * blacklist the driver completely on the host, ensuring that it is free to bind |
169 | for passthrough, with | |
170 | + | |
171 | ---- | |
6e4c46c4 | 172 | blacklist DRIVERNAME |
49f20f1b TL |
173 | ---- |
174 | + | |
175 | in a .conf file in */etc/modprobe.d/*. | |
6e4c46c4 | 176 | |
49f20f1b TL |
177 | For both methods you need to |
178 | xref:qm_pci_passthrough_update_initramfs[update the `initramfs`] again and | |
179 | reboot after that. | |
6e4c46c4 | 180 | |
49f20f1b | 181 | [[qm_pci_passthrough_vm_config]] |
6e4c46c4 DC |
182 | VM Configuration |
183 | ^^^^^^^^^^^^^^^^ | |
49f20f1b TL |
184 | To pass through the device you need to set the *hostpciX* option in the VM |
185 | configuration, for example by executing: | |
6e4c46c4 DC |
186 | |
187 | ---- | |
49f20f1b | 188 | # qm set VMID -hostpci0 00:02.0 |
6e4c46c4 DC |
189 | ---- |
190 | ||
5ee3d3cd | 191 | If your device has multiple functions (e.g., ``00:02.0`' and ``00:02.1`' ), |
1c1241f2 | 192 | you can pass them through all together with the shortened syntax ``00:02`' |
6e4c46c4 DC |
193 | |
194 | There are some options to which may be necessary, depending on the device | |
49f20f1b TL |
195 | and guest OS: |
196 | ||
197 | * *x-vga=on|off* marks the PCI(e) device as the primary GPU of the VM. | |
198 | With this enabled the *vga* configuration option will be ignored. | |
6e4c46c4 | 199 | |
6e4c46c4 | 200 | * *pcie=on|off* tells {pve} to use a PCIe or PCI port. Some guests/device |
49f20f1b TL |
201 | combination require PCIe rather than PCI. PCIe is only available for 'q35' |
202 | machine types. | |
203 | ||
6e4c46c4 DC |
204 | * *rombar=on|off* makes the firmware ROM visible for the guest. Default is on. |
205 | Some PCI(e) devices need this disabled. | |
49f20f1b | 206 | |
6e4c46c4 | 207 | * *romfile=<path>*, is an optional path to a ROM file for the device to use. |
49f20f1b TL |
208 | This is a relative path under */usr/share/kvm/*. |
209 | ||
39d84f28 | 210 | .Example |
6e4c46c4 DC |
211 | |
212 | An example of PCIe passthrough with a GPU set to primary: | |
213 | ||
214 | ---- | |
49f20f1b | 215 | # qm set VMID -hostpci0 02:00,pcie=on,x-vga=on |
6e4c46c4 DC |
216 | ---- |
217 | ||
49f20f1b | 218 | |
6e4c46c4 DC |
219 | Other considerations |
220 | ^^^^^^^^^^^^^^^^^^^^ | |
221 | ||
222 | When passing through a GPU, the best compatibility is reached when using | |
49f20f1b TL |
223 | 'q35' as machine type, 'OVMF' ('EFI' for VMs) instead of SeaBIOS and PCIe |
224 | instead of PCI. Note that if you want to use 'OVMF' for GPU passthrough, the | |
225 | GPU needs to have an EFI capable ROM, otherwise use SeaBIOS instead. | |
6e4c46c4 DC |
226 | |
227 | SR-IOV | |
228 | ~~~~~~ | |
229 | ||
49f20f1b TL |
230 | Another variant for passing through PCI(e) devices, is to use the hardware |
231 | virtualization features of your devices, if available. | |
232 | ||
233 | 'SR-IOV' (**S**ingle-**R**oot **I**nput/**O**utput **V**irtualization) enables | |
234 | a single device to provide multiple 'VF' (**V**irtual **F**unctions) to the | |
235 | system. Each of those 'VF' can be used in a different VM, with full hardware | |
236 | features and also better performance and lower latency than software | |
237 | virtualized devices. | |
6e4c46c4 | 238 | |
49f20f1b TL |
239 | Currently, the most common use case for this are NICs (**N**etwork |
240 | **I**nterface **C**ard) with SR-IOV support, which can provide multiple VFs per | |
241 | physical port. This allows using features such as checksum offloading, etc. to | |
242 | be used inside a VM, reducing the (host) CPU overhead. | |
6e4c46c4 | 243 | |
6e4c46c4 DC |
244 | |
245 | Host Configuration | |
246 | ^^^^^^^^^^^^^^^^^^ | |
247 | ||
49f20f1b | 248 | Generally, there are two methods for enabling virtual functions on a device. |
6e4c46c4 | 249 | |
49f20f1b | 250 | * sometimes there is an option for the driver module e.g. for some |
6e4c46c4 | 251 | Intel drivers |
49f20f1b TL |
252 | + |
253 | ---- | |
6e4c46c4 | 254 | max_vfs=4 |
49f20f1b TL |
255 | ---- |
256 | + | |
257 | which could be put file with '.conf' ending under */etc/modprobe.d/*. | |
6e4c46c4 | 258 | (Do not forget to update your initramfs after that) |
49f20f1b | 259 | + |
6e4c46c4 DC |
260 | Please refer to your driver module documentation for the exact |
261 | parameters and options. | |
262 | ||
49f20f1b TL |
263 | * The second, more generic, approach is using the `sysfs`. |
264 | If a device and driver supports this you can change the number of VFs on | |
265 | the fly. For example, to setup 4 VFs on device 0000:01:00.0 execute: | |
266 | + | |
6e4c46c4 | 267 | ---- |
49f20f1b | 268 | # echo 4 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs |
6e4c46c4 | 269 | ---- |
49f20f1b TL |
270 | + |
271 | To make this change persistent you can use the `sysfsutils` Debian package. | |
39d84f28 | 272 | After installation configure it via */etc/sysfs.conf* or a `FILE.conf' in |
49f20f1b | 273 | */etc/sysfs.d/*. |
6e4c46c4 DC |
274 | |
275 | VM Configuration | |
276 | ^^^^^^^^^^^^^^^^ | |
277 | ||
49f20f1b TL |
278 | After creating VFs, you should see them as separate PCI(e) devices when |
279 | outputting them with `lspci`. Get their ID and pass them through like a | |
280 | xref:qm_pci_passthrough_vm_config[normal PCI(e) device]. | |
6e4c46c4 DC |
281 | |
282 | Other considerations | |
283 | ^^^^^^^^^^^^^^^^^^^^ | |
284 | ||
285 | For this feature, platform support is especially important. It may be necessary | |
49f20f1b TL |
286 | to enable this feature in the BIOS/EFI first, or to use a specific PCI(e) port |
287 | for it to work. In doubt, consult the manual of the platform or contact its | |
288 | vendor. | |
050192c5 | 289 | |
d25f097c TL |
290 | Mediated Devices (vGPU, GVT-g) |
291 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
050192c5 | 292 | |
a22d7c24 | 293 | Mediated devices are another method to reuse features and performance from |
d25f097c TL |
294 | physical hardware for virtualized hardware. These are found most common in |
295 | virtualized GPU setups such as Intels GVT-g and Nvidias vGPUs used in their | |
296 | GRID technology. | |
297 | ||
298 | With this, a physical Card is able to create virtual cards, similar to SR-IOV. | |
299 | The difference is that mediated devices do not appear as PCI(e) devices in the | |
300 | host, and are such only suited for using in virtual machines. | |
050192c5 | 301 | |
050192c5 DC |
302 | |
303 | Host Configuration | |
304 | ^^^^^^^^^^^^^^^^^^ | |
305 | ||
d25f097c | 306 | In general your card's driver must support that feature, otherwise it will |
a22d7c24 | 307 | not work. So please refer to your vendor for compatible drivers and how to |
050192c5 DC |
308 | configure them. |
309 | ||
a22d7c24 SR |
310 | Intels drivers for GVT-g are integrated in the Kernel and should work |
311 | with 5th, 6th and 7th generation Intel Core Processors, as well as E3 v4, E3 | |
312 | v5 and E3 v6 Xeon Processors. | |
050192c5 | 313 | |
1748211a SI |
314 | To enable it for Intel Graphics, you have to make sure to load the module |
315 | 'kvmgt' (for example via `/etc/modules`) and to enable it on the | |
69055103 | 316 | xref:sysboot_edit_kernel_cmdline[Kernel commandline] and add the following parameter: |
050192c5 DC |
317 | |
318 | ---- | |
319 | i915.enable_gvt=1 | |
320 | ---- | |
321 | ||
322 | After that remember to | |
323 | xref:qm_pci_passthrough_update_initramfs[update the `initramfs`], | |
1748211a | 324 | and reboot your host. |
050192c5 DC |
325 | |
326 | VM Configuration | |
327 | ^^^^^^^^^^^^^^^^ | |
328 | ||
d25f097c TL |
329 | To use a mediated device, simply specify the `mdev` property on a `hostpciX` |
330 | VM configuration option. | |
050192c5 | 331 | |
d25f097c TL |
332 | You can get the supported devices via the 'sysfs'. For example, to list the |
333 | supported types for the device '0000:00:02.0' you would simply execute: | |
050192c5 DC |
334 | |
335 | ---- | |
336 | # ls /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types | |
337 | ---- | |
338 | ||
339 | Each entry is a directory which contains the following important files: | |
340 | ||
d25f097c TL |
341 | * 'available_instances' contains the amount of still available instances of |
342 | this type, each 'mdev' use in a VM reduces this. | |
050192c5 | 343 | * 'description' contains a short description about the capabilities of the type |
d25f097c TL |
344 | * 'create' is the endpoint to create such a device, {pve} does this |
345 | automatically for you, if a 'hostpciX' option with `mdev` is configured. | |
050192c5 | 346 | |
d25f097c | 347 | Example configuration with an `Intel GVT-g vGPU` (`Intel Skylake 6700k`): |
050192c5 DC |
348 | |
349 | ---- | |
350 | # qm set VMID -hostpci0 00:02.0,mdev=i915-GVTg_V5_4 | |
351 | ---- | |
352 | ||
353 | With this set, {pve} automatically creates such a device on VM start, and | |
354 | cleans it up again when the VM stops. | |
e582833b DC |
355 | |
356 | ifdef::wiki[] | |
357 | ||
358 | See Also | |
359 | ~~~~~~~~ | |
360 | ||
361 | * link:/wiki/Pci_passthrough[PCI Passthrough Examples] | |
362 | ||
363 | endif::wiki[] |