2 # build a platform or a module
4 # Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>
5 # Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
7 # This program and the accompanying materials
8 # are licensed and made available under the terms and conditions of the BSD License
9 # which accompanies this distribution. The full text of the license may be found at
10 # http://opensource.org/licenses/bsd-license.php
12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
19 import Common
.LongFilePathOs
as os
27 import encodings
.ascii
31 from threading
import *
32 from optparse
import OptionParser
33 from subprocess
import *
34 from Common
import Misc
as Utils
36 from Common
.LongFilePathSupport
import OpenLongFilePath
as open
37 from Common
.LongFilePathSupport
import LongFilePath
38 from Common
.TargetTxtClassObject
import *
39 from Common
.ToolDefClassObject
import *
40 from Common
.DataType
import *
41 from Common
.BuildVersion
import gBUILD_VERSION
42 from AutoGen
.AutoGen
import *
43 from Common
.BuildToolError
import *
44 from Workspace
.WorkspaceDatabase
import *
45 from Common
.MultipleWorkspace
import MultipleWorkspace
as mws
47 from BuildReport
import BuildReport
48 from GenPatchPcdTable
.GenPatchPcdTable
import *
49 from PatchPcdValue
.PatchPcdValue
import *
51 import Common
.EdkLogger
52 import Common
.GlobalData
as GlobalData
54 # Version and Copyright
55 VersionNumber
= "0.60" + ' ' + gBUILD_VERSION
56 __version__
= "%prog Version " + VersionNumber
57 __copyright__
= "Copyright (c) 2007 - 2016, Intel Corporation All rights reserved."
59 ## standard targets of build command
60 gSupportedTarget
= ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
62 ## build configuration file
63 gBuildConfiguration
= "target.txt"
64 gToolsDefinition
= "tools_def.txt"
66 TemporaryTablePattern
= re
.compile(r
'^_\d+_\d+_[a-fA-F0-9]+$')
69 ## Check environment PATH variable to make sure the specified tool is found
71 # If the tool is found in the PATH, then True is returned
72 # Otherwise, False is returned
74 def IsToolInPath(tool
):
75 if os
.environ
.has_key('PATHEXT'):
76 extns
= os
.environ
['PATHEXT'].split(os
.path
.pathsep
)
79 for pathDir
in os
.environ
['PATH'].split(os
.path
.pathsep
):
81 if os
.path
.exists(os
.path
.join(pathDir
, tool
+ ext
)):
85 ## Check environment variables
87 # Check environment variables that must be set for build. Currently they are
89 # WORKSPACE The directory all packages/platforms start from
90 # EDK_TOOLS_PATH The directory contains all tools needed by the build
91 # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
93 # If any of above environment variable is not set or has error, the build
96 def CheckEnvVariable():
98 if "WORKSPACE" not in os
.environ
:
99 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
100 ExtraData
="WORKSPACE")
102 WorkspaceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["WORKSPACE"]))
103 if not os
.path
.exists(WorkspaceDir
):
104 EdkLogger
.error("build", FILE_NOT_FOUND
, "WORKSPACE doesn't exist", ExtraData
="%s" % WorkspaceDir
)
105 elif ' ' in WorkspaceDir
:
106 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in WORKSPACE path",
107 ExtraData
=WorkspaceDir
)
108 os
.environ
["WORKSPACE"] = WorkspaceDir
110 # set multiple workspace
111 PackagesPath
= os
.getenv("PACKAGES_PATH")
112 mws
.setWs(WorkspaceDir
, PackagesPath
)
113 if mws
.PACKAGES_PATH
:
114 for Path
in mws
.PACKAGES_PATH
:
115 if not os
.path
.exists(Path
):
116 EdkLogger
.error("build", FILE_NOT_FOUND
, "One Path in PACKAGES_PATH doesn't exist", ExtraData
="%s" % Path
)
118 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in PACKAGES_PATH", ExtraData
=Path
)
121 # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
123 if "ECP_SOURCE" not in os
.environ
:
124 os
.environ
["ECP_SOURCE"] = mws
.join(WorkspaceDir
, GlobalData
.gEdkCompatibilityPkg
)
125 if "EFI_SOURCE" not in os
.environ
:
126 os
.environ
["EFI_SOURCE"] = os
.environ
["ECP_SOURCE"]
127 if "EDK_SOURCE" not in os
.environ
:
128 os
.environ
["EDK_SOURCE"] = os
.environ
["ECP_SOURCE"]
131 # Unify case of characters on case-insensitive systems
133 EfiSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EFI_SOURCE"]))
134 EdkSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_SOURCE"]))
135 EcpSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["ECP_SOURCE"]))
137 os
.environ
["EFI_SOURCE"] = EfiSourceDir
138 os
.environ
["EDK_SOURCE"] = EdkSourceDir
139 os
.environ
["ECP_SOURCE"] = EcpSourceDir
140 os
.environ
["EDK_TOOLS_PATH"] = os
.path
.normcase(os
.environ
["EDK_TOOLS_PATH"])
142 if not os
.path
.exists(EcpSourceDir
):
143 EdkLogger
.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir
)
144 elif ' ' in EcpSourceDir
:
145 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in ECP_SOURCE path",
146 ExtraData
=EcpSourceDir
)
147 if not os
.path
.exists(EdkSourceDir
):
148 if EdkSourceDir
== EcpSourceDir
:
149 EdkLogger
.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir
)
151 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE does not exist",
152 ExtraData
=EdkSourceDir
)
153 elif ' ' in EdkSourceDir
:
154 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EDK_SOURCE path",
155 ExtraData
=EdkSourceDir
)
156 if not os
.path
.exists(EfiSourceDir
):
157 if EfiSourceDir
== EcpSourceDir
:
158 EdkLogger
.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir
)
160 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE does not exist",
161 ExtraData
=EfiSourceDir
)
162 elif ' ' in EfiSourceDir
:
163 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EFI_SOURCE path",
164 ExtraData
=EfiSourceDir
)
166 # check those variables on single workspace case
168 # change absolute path to relative path to WORKSPACE
169 if EfiSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
170 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE is not under WORKSPACE",
171 ExtraData
="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir
, EfiSourceDir
))
172 if EdkSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
173 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE is not under WORKSPACE",
174 ExtraData
="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir
, EdkSourceDir
))
175 if EcpSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
176 EdkLogger
.error("build", PARAMETER_INVALID
, "ECP_SOURCE is not under WORKSPACE",
177 ExtraData
="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir
, EcpSourceDir
))
179 # check EDK_TOOLS_PATH
180 if "EDK_TOOLS_PATH" not in os
.environ
:
181 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
182 ExtraData
="EDK_TOOLS_PATH")
185 if "PATH" not in os
.environ
:
186 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
189 GlobalData
.gWorkspace
= WorkspaceDir
190 GlobalData
.gEfiSource
= EfiSourceDir
191 GlobalData
.gEdkSource
= EdkSourceDir
192 GlobalData
.gEcpSource
= EcpSourceDir
194 GlobalData
.gGlobalDefines
["WORKSPACE"] = WorkspaceDir
195 GlobalData
.gGlobalDefines
["EFI_SOURCE"] = EfiSourceDir
196 GlobalData
.gGlobalDefines
["EDK_SOURCE"] = EdkSourceDir
197 GlobalData
.gGlobalDefines
["ECP_SOURCE"] = EcpSourceDir
198 GlobalData
.gGlobalDefines
["EDK_TOOLS_PATH"] = os
.environ
["EDK_TOOLS_PATH"]
200 ## Get normalized file path
202 # Convert the path to be local format, and remove the WORKSPACE path at the
203 # beginning if the file path is given in full path.
205 # @param FilePath File path to be normalized
206 # @param Workspace Workspace path which the FilePath will be checked against
208 # @retval string The normalized file path
210 def NormFile(FilePath
, Workspace
):
211 # check if the path is absolute or relative
212 if os
.path
.isabs(FilePath
):
213 FileFullPath
= os
.path
.normpath(FilePath
)
215 FileFullPath
= os
.path
.normpath(mws
.join(Workspace
, FilePath
))
216 Workspace
= mws
.getWs(Workspace
, FilePath
)
218 # check if the file path exists or not
219 if not os
.path
.isfile(FileFullPath
):
220 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath
)
222 # remove workspace directory from the beginning part of the file path
223 if Workspace
[-1] in ["\\", "/"]:
224 return FileFullPath
[len(Workspace
):]
226 return FileFullPath
[(len(Workspace
) + 1):]
228 ## Get the output of an external program
230 # This is the entrance method of thread reading output of an external program and
231 # putting them in STDOUT/STDERR of current program.
233 # @param From The stream message read from
234 # @param To The stream message put on
235 # @param ExitFlag The flag used to indicate stopping reading
237 def ReadMessage(From
, To
, ExitFlag
):
239 # read one line a time
240 Line
= From
.readline()
241 # empty string means "end"
242 if Line
!= None and Line
!= "":
249 ## Launch an external program
251 # This method will call subprocess.Popen to execute an external program with
252 # given options in specified directory. Because of the dead-lock issue during
253 # redirecting output of the external program, threads are used to to do the
256 # @param Command A list or string containing the call of the program
257 # @param WorkingDir The directory in which the program will be running
259 def LaunchCommand(Command
, WorkingDir
):
260 # if working directory doesn't exist, Popen() will raise an exception
261 if not os
.path
.isdir(WorkingDir
):
262 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=WorkingDir
)
264 # Command is used as the first Argument in following Popen().
265 # It could be a string or sequence. We find that if command is a string in following Popen(),
266 # ubuntu may fail with an error message that the command is not found.
267 # So here we may need convert command from string to list instance.
268 if platform
.system() != 'Windows':
269 if not isinstance(Command
, list):
270 Command
= Command
.split()
271 Command
= ' '.join(Command
)
274 EndOfProcedure
= None
277 Proc
= Popen(Command
, stdout
=PIPE
, stderr
=PIPE
, env
=os
.environ
, cwd
=WorkingDir
, bufsize
=-1, shell
=True)
279 # launch two threads to read the STDOUT and STDERR
280 EndOfProcedure
= Event()
281 EndOfProcedure
.clear()
283 StdOutThread
= Thread(target
=ReadMessage
, args
=(Proc
.stdout
, EdkLogger
.info
, EndOfProcedure
))
284 StdOutThread
.setName("STDOUT-Redirector")
285 StdOutThread
.setDaemon(False)
289 StdErrThread
= Thread(target
=ReadMessage
, args
=(Proc
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
290 StdErrThread
.setName("STDERR-Redirector")
291 StdErrThread
.setDaemon(False)
294 # waiting for program exit
296 except: # in case of aborting
297 # terminate the threads redirecting the program output
298 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
299 if EndOfProcedure
!= None:
302 if type(Command
) != type(""):
303 Command
= " ".join(Command
)
304 EdkLogger
.error("build", COMMAND_FAILURE
, "Failed to start command", ExtraData
="%s [%s]" % (Command
, WorkingDir
))
311 # check the return code of the program
312 if Proc
.returncode
!= 0:
313 if type(Command
) != type(""):
314 Command
= " ".join(Command
)
315 # print out the Response file and its content when make failure
316 RespFile
= os
.path
.join(WorkingDir
, 'OUTPUT', 'respfilelist.txt')
317 if os
.path
.isfile(RespFile
):
319 RespContent
= f
.read()
321 EdkLogger
.info(RespContent
)
323 EdkLogger
.error("build", COMMAND_FAILURE
, ExtraData
="%s [%s]" % (Command
, WorkingDir
))
325 ## The smallest unit that can be built in multi-thread build mode
327 # This is the base class of build unit. The "Obj" parameter must provide
328 # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
331 # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
336 # @param self The object pointer
337 # @param Obj The object the build is working on
338 # @param Target The build target name, one of gSupportedTarget
339 # @param Dependency The BuildUnit(s) which must be completed in advance
340 # @param WorkingDir The directory build command starts in
342 def __init__(self
, Obj
, BuildCommand
, Target
, Dependency
, WorkingDir
="."):
343 self
.BuildObject
= Obj
344 self
.Dependency
= Dependency
345 self
.WorkingDir
= WorkingDir
347 self
.BuildCommand
= BuildCommand
349 EdkLogger
.error("build", OPTION_MISSING
,
350 "No build command found for this module. "
351 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
352 (Obj
.BuildTarget
, Obj
.ToolChain
, Obj
.Arch
),
358 # It just returns the string representation of self.BuildObject
360 # @param self The object pointer
363 return str(self
.BuildObject
)
365 ## "==" operator method
367 # It just compares self.BuildObject with "Other". So self.BuildObject must
368 # provide its own __eq__() method.
370 # @param self The object pointer
371 # @param Other The other BuildUnit object compared to
373 def __eq__(self
, Other
):
374 return Other
!= None and self
.BuildObject
== Other
.BuildObject \
375 and self
.BuildObject
.Arch
== Other
.BuildObject
.Arch
379 # It just returns the hash value of self.BuildObject which must be hashable.
381 # @param self The object pointer
384 return hash(self
.BuildObject
) + hash(self
.BuildObject
.Arch
)
387 return repr(self
.BuildObject
)
389 ## The smallest module unit that can be built by nmake/make command in multi-thread build mode
391 # This class is for module build by nmake/make build system. The "Obj" parameter
392 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
393 # be make units missing build.
395 # Currently the "Obj" should be only ModuleAutoGen object.
397 class ModuleMakeUnit(BuildUnit
):
400 # @param self The object pointer
401 # @param Obj The ModuleAutoGen object the build is working on
402 # @param Target The build target name, one of gSupportedTarget
404 def __init__(self
, Obj
, Target
):
405 Dependency
= [ModuleMakeUnit(La
, Target
) for La
in Obj
.LibraryAutoGenList
]
406 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
407 if Target
in [None, "", "all"]:
408 self
.Target
= "tbuild"
410 ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
412 # This class is for platform build by nmake/make build system. The "Obj" parameter
413 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
414 # be make units missing build.
416 # Currently the "Obj" should be only PlatformAutoGen object.
418 class PlatformMakeUnit(BuildUnit
):
421 # @param self The object pointer
422 # @param Obj The PlatformAutoGen object the build is working on
423 # @param Target The build target name, one of gSupportedTarget
425 def __init__(self
, Obj
, Target
):
426 Dependency
= [ModuleMakeUnit(Lib
, Target
) for Lib
in self
.BuildObject
.LibraryAutoGenList
]
427 Dependency
.extend([ModuleMakeUnit(Mod
, Target
) for Mod
in self
.BuildObject
.ModuleAutoGenList
])
428 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
430 ## The class representing the task of a module build or platform build
432 # This class manages the build tasks in multi-thread build mode. Its jobs include
433 # scheduling thread running, catching thread error, monitor the thread status, etc.
436 # queue for tasks waiting for schedule
437 _PendingQueue
= sdict()
438 _PendingQueueLock
= threading
.Lock()
440 # queue for tasks ready for running
441 _ReadyQueue
= sdict()
442 _ReadyQueueLock
= threading
.Lock()
444 # queue for run tasks
445 _RunningQueue
= sdict()
446 _RunningQueueLock
= threading
.Lock()
448 # queue containing all build tasks, in case duplicate build
451 # flag indicating error occurs in a running thread
452 _ErrorFlag
= threading
.Event()
456 # BoundedSemaphore object used to control the number of running threads
459 # flag indicating if the scheduler is started or not
460 _SchedulerStopped
= threading
.Event()
461 _SchedulerStopped
.set()
463 ## Start the task scheduler thread
465 # @param MaxThreadNumber The maximum thread number
466 # @param ExitFlag Flag used to end the scheduler
469 def StartScheduler(MaxThreadNumber
, ExitFlag
):
470 SchedulerThread
= Thread(target
=BuildTask
.Scheduler
, args
=(MaxThreadNumber
, ExitFlag
))
471 SchedulerThread
.setName("Build-Task-Scheduler")
472 SchedulerThread
.setDaemon(False)
473 SchedulerThread
.start()
474 # wait for the scheduler to be started, especially useful in Linux
475 while not BuildTask
.IsOnGoing():
480 # @param MaxThreadNumber The maximum thread number
481 # @param ExitFlag Flag used to end the scheduler
484 def Scheduler(MaxThreadNumber
, ExitFlag
):
485 BuildTask
._SchedulerStopped
.clear()
487 # use BoundedSemaphore to control the maximum running threads
488 BuildTask
._Thread
= BoundedSemaphore(MaxThreadNumber
)
490 # scheduling loop, which will exits when no pending/ready task and
491 # indicated to do so, or there's error in running thread
493 while (len(BuildTask
._PendingQueue
) > 0 or len(BuildTask
._ReadyQueue
) > 0 \
494 or not ExitFlag
.isSet()) and not BuildTask
._ErrorFlag
.isSet():
495 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Pending Queue (%d), Ready Queue (%d)"
496 % (len(BuildTask
._PendingQueue
), len(BuildTask
._ReadyQueue
)))
498 # get all pending tasks
499 BuildTask
._PendingQueueLock
.acquire()
500 BuildObjectList
= BuildTask
._PendingQueue
.keys()
502 # check if their dependency is resolved, and if true, move them
505 for BuildObject
in BuildObjectList
:
506 Bt
= BuildTask
._PendingQueue
[BuildObject
]
508 BuildTask
._ReadyQueue
[BuildObject
] = BuildTask
._PendingQueue
.pop(BuildObject
)
509 BuildTask
._PendingQueueLock
.release()
511 # launch build thread until the maximum number of threads is reached
512 while not BuildTask
._ErrorFlag
.isSet():
513 # empty ready queue, do nothing further
514 if len(BuildTask
._ReadyQueue
) == 0:
517 # wait for active thread(s) exit
518 BuildTask
._Thread
.acquire(True)
520 # start a new build thread
521 Bo
= BuildTask
._ReadyQueue
.keys()[0]
522 Bt
= BuildTask
._ReadyQueue
.pop(Bo
)
524 # move into running queue
525 BuildTask
._RunningQueueLock
.acquire()
526 BuildTask
._RunningQueue
[Bo
] = Bt
527 BuildTask
._RunningQueueLock
.release()
536 # wait for all running threads exit
537 if BuildTask
._ErrorFlag
.isSet():
538 EdkLogger
.quiet("\nWaiting for all build threads exit...")
539 # while not BuildTask._ErrorFlag.isSet() and \
540 while len(BuildTask
._RunningQueue
) > 0:
541 EdkLogger
.verbose("Waiting for thread ending...(%d)" % len(BuildTask
._RunningQueue
))
542 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Threads [%s]" % ", ".join([Th
.getName() for Th
in threading
.enumerate()]))
545 except BaseException
, X
:
547 # TRICK: hide the output of threads left runing, so that the user can
548 # catch the error message easily
550 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
551 BuildTask
._ErrorFlag
.set()
552 BuildTask
._ErrorMessage
= "build thread scheduler error\n\t%s" % str(X
)
554 BuildTask
._PendingQueue
.clear()
555 BuildTask
._ReadyQueue
.clear()
556 BuildTask
._RunningQueue
.clear()
557 BuildTask
._TaskQueue
.clear()
558 BuildTask
._SchedulerStopped
.set()
560 ## Wait for all running method exit
563 def WaitForComplete():
564 BuildTask
._SchedulerStopped
.wait()
566 ## Check if the scheduler is running or not
570 return not BuildTask
._SchedulerStopped
.isSet()
575 if BuildTask
.IsOnGoing():
576 BuildTask
._ErrorFlag
.set()
577 BuildTask
.WaitForComplete()
579 ## Check if there's error in running thread
581 # Since the main thread cannot catch exceptions in other thread, we have to
582 # use threading.Event to communicate this formation to main thread.
586 return BuildTask
._ErrorFlag
.isSet()
588 ## Get error message in running thread
590 # Since the main thread cannot catch exceptions in other thread, we have to
591 # use a static variable to communicate this message to main thread.
594 def GetErrorMessage():
595 return BuildTask
._ErrorMessage
597 ## Factory method to create a BuildTask object
599 # This method will check if a module is building or has been built. And if
600 # true, just return the associated BuildTask object in the _TaskQueue. If
601 # not, create and return a new BuildTask object. The new BuildTask object
602 # will be appended to the _PendingQueue for scheduling later.
604 # @param BuildItem A BuildUnit object representing a build object
605 # @param Dependency The dependent build object of BuildItem
608 def New(BuildItem
, Dependency
=None):
609 if BuildItem
in BuildTask
._TaskQueue
:
610 Bt
= BuildTask
._TaskQueue
[BuildItem
]
614 Bt
._Init
(BuildItem
, Dependency
)
615 BuildTask
._TaskQueue
[BuildItem
] = Bt
617 BuildTask
._PendingQueueLock
.acquire()
618 BuildTask
._PendingQueue
[BuildItem
] = Bt
619 BuildTask
._PendingQueueLock
.release()
623 ## The real constructor of BuildTask
625 # @param BuildItem A BuildUnit object representing a build object
626 # @param Dependency The dependent build object of BuildItem
628 def _Init(self
, BuildItem
, Dependency
=None):
629 self
.BuildItem
= BuildItem
631 self
.DependencyList
= []
632 if Dependency
== None:
633 Dependency
= BuildItem
.Dependency
635 Dependency
.extend(BuildItem
.Dependency
)
636 self
.AddDependency(Dependency
)
637 # flag indicating build completes, used to avoid unnecessary re-build
638 self
.CompleteFlag
= False
640 ## Check if all dependent build tasks are completed or not
644 for Dep
in self
.DependencyList
:
645 if Dep
.CompleteFlag
== True:
652 ## Add dependent build task
654 # @param Dependency The list of dependent build objects
656 def AddDependency(self
, Dependency
):
657 for Dep
in Dependency
:
658 if not Dep
.BuildObject
.IsBinaryModule
:
659 self
.DependencyList
.append(BuildTask
.New(Dep
)) # BuildTask list
661 ## The thread wrapper of LaunchCommand function
663 # @param Command A list or string contains the call of the command
664 # @param WorkingDir The directory in which the program will be running
666 def _CommandThread(self
, Command
, WorkingDir
):
668 LaunchCommand(Command
, WorkingDir
)
669 self
.CompleteFlag
= True
672 # TRICK: hide the output of threads left runing, so that the user can
673 # catch the error message easily
675 if not BuildTask
._ErrorFlag
.isSet():
676 GlobalData
.gBuildingModule
= "%s [%s, %s, %s]" % (str(self
.BuildItem
.BuildObject
),
677 self
.BuildItem
.BuildObject
.Arch
,
678 self
.BuildItem
.BuildObject
.ToolChain
,
679 self
.BuildItem
.BuildObject
.BuildTarget
681 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
682 BuildTask
._ErrorFlag
.set()
683 BuildTask
._ErrorMessage
= "%s broken\n %s [%s]" % \
684 (threading
.currentThread().getName(), Command
, WorkingDir
)
685 # indicate there's a thread is available for another build task
686 BuildTask
._RunningQueueLock
.acquire()
687 BuildTask
._RunningQueue
.pop(self
.BuildItem
)
688 BuildTask
._RunningQueueLock
.release()
689 BuildTask
._Thread
.release()
691 ## Start build task thread
694 EdkLogger
.quiet("Building ... %s" % repr(self
.BuildItem
))
695 Command
= self
.BuildItem
.BuildCommand
+ [self
.BuildItem
.Target
]
696 self
.BuildTread
= Thread(target
=self
._CommandThread
, args
=(Command
, self
.BuildItem
.WorkingDir
))
697 self
.BuildTread
.setName("build thread")
698 self
.BuildTread
.setDaemon(False)
699 self
.BuildTread
.start()
701 ## The class contains the information related to EFI image
706 # Constructor will load all required image information.
708 # @param BaseName The full file path of image.
709 # @param Guid The GUID for image.
710 # @param Arch Arch of this image.
711 # @param OutputDir The output directory for image.
712 # @param DebugDir The debug directory for image.
713 # @param ImageClass PeImage Information
715 def __init__(self
, BaseName
, Guid
, Arch
, OutputDir
, DebugDir
, ImageClass
):
716 self
.BaseName
= BaseName
719 self
.OutputDir
= OutputDir
720 self
.DebugDir
= DebugDir
721 self
.Image
= ImageClass
722 self
.Image
.Size
= (self
.Image
.Size
/ 0x1000 + 1) * 0x1000
724 ## The class implementing the EDK2 build process
726 # The build process includes:
727 # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
728 # 2. Parse DSC file of active platform
729 # 3. Parse FDF file if any
730 # 4. Establish build database, including parse all other files (module, package)
731 # 5. Create AutoGen files (C code file, depex file, makefile) if necessary
732 # 6. Call build command
737 # Constructor will load all necessary configurations, parse platform, modules
738 # and packages and the establish a database for AutoGen.
740 # @param Target The build command target, one of gSupportedTarget
741 # @param WorkspaceDir The directory of workspace
742 # @param BuildOptions Build options passed from command line
744 def __init__(self
, Target
, WorkspaceDir
, BuildOptions
):
745 self
.WorkspaceDir
= WorkspaceDir
747 self
.PlatformFile
= BuildOptions
.PlatformFile
748 self
.ModuleFile
= BuildOptions
.ModuleFile
749 self
.ArchList
= BuildOptions
.TargetArch
750 self
.ToolChainList
= BuildOptions
.ToolChain
751 self
.BuildTargetList
= BuildOptions
.BuildTarget
752 self
.Fdf
= BuildOptions
.FdfFile
753 self
.FdList
= BuildOptions
.RomImage
754 self
.FvList
= BuildOptions
.FvImage
755 self
.CapList
= BuildOptions
.CapName
756 self
.SilentMode
= BuildOptions
.SilentMode
757 self
.ThreadNumber
= BuildOptions
.ThreadNumber
758 self
.SkipAutoGen
= BuildOptions
.SkipAutoGen
759 self
.Reparse
= BuildOptions
.Reparse
760 self
.SkuId
= BuildOptions
.SkuId
761 self
.ConfDirectory
= BuildOptions
.ConfDirectory
762 self
.SpawnMode
= True
763 self
.BuildReport
= BuildReport(BuildOptions
.ReportFile
, BuildOptions
.ReportType
)
764 self
.TargetTxt
= TargetTxtClassObject()
765 self
.ToolDef
= ToolDefClassObject()
766 GlobalData
.BuildOptionPcd
= BuildOptions
.OptionPcd
767 #Set global flag for build mode
768 GlobalData
.gIgnoreSource
= BuildOptions
.IgnoreSources
770 if self
.ConfDirectory
:
771 # Get alternate Conf location, if it is absolute, then just use the absolute directory name
772 ConfDirectoryPath
= os
.path
.normpath(self
.ConfDirectory
)
774 if not os
.path
.isabs(ConfDirectoryPath
):
775 # Since alternate directory name is not absolute, the alternate directory is located within the WORKSPACE
776 # This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf
777 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, ConfDirectoryPath
)
779 if "CONF_PATH" in os
.environ
:
780 ConfDirectoryPath
= os
.path
.normcase(os
.path
.normpath(os
.environ
["CONF_PATH"]))
782 # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf
783 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, 'Conf')
784 GlobalData
.gConfDirectory
= ConfDirectoryPath
785 GlobalData
.gDatabasePath
= os
.path
.normpath(os
.path
.join(ConfDirectoryPath
, GlobalData
.gDatabasePath
))
787 if BuildOptions
.DisableCache
:
788 self
.Db
= WorkspaceDatabase(":memory:")
790 self
.Db
= WorkspaceDatabase(GlobalData
.gDatabasePath
, self
.Reparse
)
791 self
.BuildDatabase
= self
.Db
.BuildObject
793 self
.ToolChainFamily
= None
794 self
.LoadFixAddress
= 0
795 self
.UniFlag
= BuildOptions
.Flag
796 self
.BuildModules
= []
798 self
.LaunchPrebuildFlag
= False
799 self
.PrebuildScript
= ''
800 self
.PostbuildScript
= ''
801 self
.PlatformBuildPath
= os
.path
.join(GlobalData
.gConfDirectory
,'.cache', '.PlatformBuild')
802 if BuildOptions
.CommandLength
:
803 GlobalData
.gCommandMaxLength
= BuildOptions
.CommandLength
805 # print dot character during doing some time-consuming work
806 self
.Progress
= Utils
.Progressor()
807 # print current build environment and configuration
808 EdkLogger
.quiet("%-16s = %s" % ("WORKSPACE", os
.environ
["WORKSPACE"]))
809 if "PACKAGES_PATH" in os
.environ
:
810 # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env.
811 EdkLogger
.quiet("%-16s = %s" % ("PACKAGES_PATH", os
.path
.normcase(os
.path
.normpath(os
.environ
["PACKAGES_PATH"]))))
812 EdkLogger
.quiet("%-16s = %s" % ("ECP_SOURCE", os
.environ
["ECP_SOURCE"]))
813 EdkLogger
.quiet("%-16s = %s" % ("EDK_SOURCE", os
.environ
["EDK_SOURCE"]))
814 EdkLogger
.quiet("%-16s = %s" % ("EFI_SOURCE", os
.environ
["EFI_SOURCE"]))
815 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os
.environ
["EDK_TOOLS_PATH"]))
816 if "EDK_TOOLS_BIN" in os
.environ
:
817 # Print the same path style with WORKSPACE env.
818 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_TOOLS_BIN"]))))
819 EdkLogger
.quiet("%-16s = %s" % ("CONF_PATH", GlobalData
.gConfDirectory
))
822 if self
.PrebuildScript
:
823 EdkLogger
.quiet("%-16s = %s" % ("PREBUILD", self
.PrebuildScript
))
824 if self
.PostbuildScript
:
825 EdkLogger
.quiet("%-16s = %s" % ("POSTBUILD", self
.PostbuildScript
))
826 if self
.PrebuildScript
:
827 self
.LaunchPrebuild()
828 self
.TargetTxt
= TargetTxtClassObject()
829 self
.ToolDef
= ToolDefClassObject()
830 if not (self
.LaunchPrebuildFlag
and os
.path
.exists(self
.PlatformBuildPath
)):
834 os
.chdir(self
.WorkspaceDir
)
836 ## Load configuration
838 # This method will parse target.txt and get the build configurations.
840 def LoadConfiguration(self
):
842 # Check target.txt and tools_def.txt and Init them
844 BuildConfigurationFile
= os
.path
.normpath(os
.path
.join(GlobalData
.gConfDirectory
, gBuildConfiguration
))
845 if os
.path
.isfile(BuildConfigurationFile
) == True:
846 StatusCode
= self
.TargetTxt
.LoadTargetTxtFile(BuildConfigurationFile
)
848 ToolDefinitionFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_CONF
]
849 if ToolDefinitionFile
== '':
850 ToolDefinitionFile
= gToolsDefinition
851 ToolDefinitionFile
= os
.path
.normpath(mws
.join(self
.WorkspaceDir
, 'Conf', ToolDefinitionFile
))
852 if os
.path
.isfile(ToolDefinitionFile
) == True:
853 StatusCode
= self
.ToolDef
.LoadToolDefFile(ToolDefinitionFile
)
855 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=ToolDefinitionFile
)
857 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=BuildConfigurationFile
)
859 # if no ARCH given in command line, get it from target.txt
860 if not self
.ArchList
:
861 self
.ArchList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET_ARCH
]
862 self
.ArchList
= tuple(self
.ArchList
)
864 # if no build target given in command line, get it from target.txt
865 if not self
.BuildTargetList
:
866 self
.BuildTargetList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET
]
868 # if no tool chain given in command line, get it from target.txt
869 if not self
.ToolChainList
:
870 self
.ToolChainList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_TAG
]
871 if self
.ToolChainList
== None or len(self
.ToolChainList
) == 0:
872 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
, ExtraData
="No toolchain given. Don't know how to build.\n")
874 # check if the tool chains are defined or not
875 NewToolChainList
= []
876 for ToolChain
in self
.ToolChainList
:
877 if ToolChain
not in self
.ToolDef
.ToolsDefTxtDatabase
[TAB_TOD_DEFINES_TOOL_CHAIN_TAG
]:
878 EdkLogger
.warn("build", "Tool chain [%s] is not defined" % ToolChain
)
880 NewToolChainList
.append(ToolChain
)
881 # if no tool chain available, break the build
882 if len(NewToolChainList
) == 0:
883 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
884 ExtraData
="[%s] not defined. No toolchain available for build!\n" % ", ".join(self
.ToolChainList
))
886 self
.ToolChainList
= NewToolChainList
889 ToolDefinition
= self
.ToolDef
.ToolsDefTxtDatabase
890 for Tool
in self
.ToolChainList
:
891 if TAB_TOD_DEFINES_FAMILY
not in ToolDefinition
or Tool
not in ToolDefinition
[TAB_TOD_DEFINES_FAMILY
] \
892 or not ToolDefinition
[TAB_TOD_DEFINES_FAMILY
][Tool
]:
893 EdkLogger
.warn("No tool chain family found in configuration for %s. Default to MSFT." % Tool
)
894 ToolChainFamily
.append("MSFT")
896 ToolChainFamily
.append(ToolDefinition
[TAB_TOD_DEFINES_FAMILY
][Tool
])
897 self
.ToolChainFamily
= ToolChainFamily
899 if self
.ThreadNumber
== None:
900 self
.ThreadNumber
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER
]
901 if self
.ThreadNumber
== '':
902 self
.ThreadNumber
= 0
904 self
.ThreadNumber
= int(self
.ThreadNumber
, 0)
906 if self
.ThreadNumber
== 0:
907 self
.ThreadNumber
= 1
909 if not self
.PlatformFile
:
910 PlatformFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_ACTIVE_PLATFORM
]
912 # Try to find one in current directory
913 WorkingDirectory
= os
.getcwd()
914 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.dsc')))
915 FileNum
= len(FileList
)
917 EdkLogger
.error("build", OPTION_MISSING
,
918 ExtraData
="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum
, WorkingDirectory
))
920 PlatformFile
= FileList
[0]
922 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
923 ExtraData
="No active platform specified in target.txt or command line! Nothing can be built.\n")
925 self
.PlatformFile
= PathClass(NormFile(PlatformFile
, self
.WorkspaceDir
), self
.WorkspaceDir
)
927 ## Initialize build configuration
929 # This method will parse DSC file and merge the configurations from
930 # command line and target.txt, then get the final build configurations.
933 # parse target.txt, tools_def.txt, and platform file
934 self
.LoadConfiguration()
936 # Allow case-insensitive for those from command line or configuration file
937 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
939 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
941 # create metafile database
943 self
.Db
.InitDatabase()
945 def InitPreBuild(self
):
946 self
.LoadConfiguration()
947 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
949 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
950 if self
.BuildTargetList
:
951 GlobalData
.gGlobalDefines
['TARGET'] = self
.BuildTargetList
[0]
953 GlobalData
.gGlobalDefines
['ARCH'] = self
.ArchList
[0]
954 if self
.ToolChainList
:
955 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = self
.ToolChainList
[0]
956 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = self
.ToolChainList
[0]
957 if self
.ToolChainFamily
:
958 GlobalData
.gGlobalDefines
['FAMILY'] = self
.ToolChainFamily
[0]
959 if 'PREBUILD' in GlobalData
.gCommandLineDefines
.keys():
960 self
.Prebuild
= GlobalData
.gCommandLineDefines
.get('PREBUILD')
962 self
.Db
.InitDatabase()
964 Platform
= self
.Db
._MapPlatform
(str(self
.PlatformFile
))
965 self
.Prebuild
= str(Platform
.Prebuild
)
967 PrebuildList
= self
.Prebuild
.split()
968 if not os
.path
.isabs(PrebuildList
[0]):
969 PrebuildList
[0] = mws
.join(self
.WorkspaceDir
, PrebuildList
[0])
970 if os
.path
.isfile(PrebuildList
[0]):
971 self
.PrebuildScript
= PrebuildList
[0]
972 self
.Prebuild
= ' '.join(PrebuildList
)
973 self
.Prebuild
+= self
.PassCommandOption(self
.BuildTargetList
, self
.ArchList
, self
.ToolChainList
)
974 #self.LaunchPrebuild()
976 EdkLogger
.error("Prebuild", PREBUILD_ERROR
, "the prebuild script %s is not exist.\n If you'd like to disable the Prebuild process, please use the format: -D PREBUILD=\"\" " %(PrebuildList
[0]))
978 def InitPostBuild(self
):
979 if 'POSTBUILD' in GlobalData
.gCommandLineDefines
.keys():
980 self
.Postbuild
= GlobalData
.gCommandLineDefines
.get('POSTBUILD')
982 Platform
= self
.Db
._MapPlatform
(str(self
.PlatformFile
))
983 self
.Postbuild
= str(Platform
.Postbuild
)
985 PostbuildList
= self
.Postbuild
.split()
986 if not os
.path
.isabs(PostbuildList
[0]):
987 PostbuildList
[0] = mws
.join(self
.WorkspaceDir
, PostbuildList
[0])
988 if os
.path
.isfile(PostbuildList
[0]):
989 self
.PostbuildScript
= PostbuildList
[0]
990 self
.Postbuild
= ' '.join(PostbuildList
)
991 self
.Postbuild
+= self
.PassCommandOption(self
.BuildTargetList
, self
.ArchList
, self
.ToolChainList
)
993 EdkLogger
.error("Postbuild", POSTBUILD_ERROR
, "the postbuild script %s is not exist.\n If you'd like to disable the Postbuild process, please use the format: -D POSTBUILD=\"\" " %(PostbuildList
[0]))
995 def PassCommandOption(self
, BuildTarget
, TargetArch
, ToolChain
):
997 if GlobalData
.gCommand
and isinstance(GlobalData
.gCommand
, list):
998 BuildStr
+= ' ' + ' '.join(GlobalData
.gCommand
)
1001 ToolChainFlag
= False
1003 if GlobalData
.gOptions
and not GlobalData
.gOptions
.BuildTarget
:
1005 if GlobalData
.gOptions
and not GlobalData
.gOptions
.TargetArch
:
1007 if GlobalData
.gOptions
and not GlobalData
.gOptions
.ToolChain
:
1008 ToolChainFlag
= True
1010 if TargetFlag
and BuildTarget
:
1011 if isinstance(BuildTarget
, list) or isinstance(BuildTarget
, tuple):
1012 BuildStr
+= ' -b ' + ' -b '.join(BuildTarget
)
1013 elif isinstance(BuildTarget
, str):
1014 BuildStr
+= ' -b ' + BuildTarget
1015 if ArchFlag
and TargetArch
:
1016 if isinstance(TargetArch
, list) or isinstance(TargetArch
, tuple):
1017 BuildStr
+= ' -a ' + ' -a '.join(TargetArch
)
1018 elif isinstance(TargetArch
, str):
1019 BuildStr
+= ' -a ' + TargetArch
1020 if ToolChainFlag
and ToolChain
:
1021 if isinstance(ToolChain
, list) or isinstance(ToolChain
, tuple):
1022 BuildStr
+= ' -t ' + ' -t '.join(ToolChain
)
1023 elif isinstance(ToolChain
, str):
1024 BuildStr
+= ' -t ' + ToolChain
1028 def LaunchPrebuild(self
):
1030 EdkLogger
.info("\n- Prebuild Start -\n")
1031 self
.LaunchPrebuildFlag
= True
1032 PrebuildEnvFile
= os
.path
.join(GlobalData
.gConfDirectory
,'.cache','.PrebuildEnv')
1033 if os
.path
.isfile(PrebuildEnvFile
):
1034 os
.remove(PrebuildEnvFile
)
1035 if os
.path
.isfile(self
.PlatformBuildPath
):
1036 os
.remove(self
.PlatformBuildPath
)
1037 if sys
.platform
== "win32":
1038 args
= ' && '.join((self
.Prebuild
, 'set > ' + PrebuildEnvFile
))
1039 Process
= Popen(args
, stdout
=PIPE
, stderr
=PIPE
)
1041 args
= ' && '.join((self
.Prebuild
, 'env > ' + PrebuildEnvFile
))
1042 Process
= Popen(args
, stdout
=PIPE
, stderr
=PIPE
, shell
=True)
1044 # launch two threads to read the STDOUT and STDERR
1045 EndOfProcedure
= Event()
1046 EndOfProcedure
.clear()
1048 StdOutThread
= Thread(target
=ReadMessage
, args
=(Process
.stdout
, EdkLogger
.info
, EndOfProcedure
))
1049 StdOutThread
.setName("STDOUT-Redirector")
1050 StdOutThread
.setDaemon(False)
1051 StdOutThread
.start()
1054 StdErrThread
= Thread(target
=ReadMessage
, args
=(Process
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
1055 StdErrThread
.setName("STDERR-Redirector")
1056 StdErrThread
.setDaemon(False)
1057 StdErrThread
.start()
1058 # waiting for program exit
1065 if Process
.returncode
!= 0 :
1066 EdkLogger
.error("Prebuild", PREBUILD_ERROR
, 'Prebuild process is not success!')
1068 if os
.path
.exists(PrebuildEnvFile
):
1069 f
= open(PrebuildEnvFile
)
1070 envs
= f
.readlines()
1072 envs
= itertools
.imap(lambda l
: l
.split('=',1), envs
)
1073 envs
= itertools
.ifilter(lambda l
: len(l
) == 2, envs
)
1074 envs
= itertools
.imap(lambda l
: [i
.strip() for i
in l
], envs
)
1075 os
.environ
.update(dict(envs
))
1076 EdkLogger
.info("\n- Prebuild Done -\n")
1078 def LaunchPostbuild(self
):
1080 EdkLogger
.info("\n- Postbuild Start -\n")
1081 if sys
.platform
== "win32":
1082 Process
= Popen(self
.Postbuild
, stdout
=PIPE
, stderr
=PIPE
)
1084 Process
= Popen(self
.Postbuild
, stdout
=PIPE
, stderr
=PIPE
, shell
=True)
1085 # launch two threads to read the STDOUT and STDERR
1086 EndOfProcedure
= Event()
1087 EndOfProcedure
.clear()
1089 StdOutThread
= Thread(target
=ReadMessage
, args
=(Process
.stdout
, EdkLogger
.info
, EndOfProcedure
))
1090 StdOutThread
.setName("STDOUT-Redirector")
1091 StdOutThread
.setDaemon(False)
1092 StdOutThread
.start()
1095 StdErrThread
= Thread(target
=ReadMessage
, args
=(Process
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
1096 StdErrThread
.setName("STDERR-Redirector")
1097 StdErrThread
.setDaemon(False)
1098 StdErrThread
.start()
1099 # waiting for program exit
1106 if Process
.returncode
!= 0 :
1107 EdkLogger
.error("Postbuild", POSTBUILD_ERROR
, 'Postbuild process is not success!')
1108 EdkLogger
.info("\n- Postbuild Done -\n")
1109 ## Build a module or platform
1111 # Create autogen code and makefile for a module or platform, and the launch
1112 # "make" command to build it
1114 # @param Target The target of build command
1115 # @param Platform The platform file
1116 # @param Module The module file
1117 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
1118 # @param ToolChain The name of toolchain to build
1119 # @param Arch The arch of the module/platform
1120 # @param CreateDepModuleCodeFile Flag used to indicate creating code
1121 # for dependent modules/Libraries
1122 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
1123 # for dependent modules/Libraries
1125 def _BuildPa(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
1126 if AutoGenObject
== None:
1129 # skip file generation for cleanxxx targets, run and fds target
1130 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1131 # for target which must generate AutoGen code and makefile
1132 if not self
.SkipAutoGen
or Target
== 'genc':
1133 self
.Progress
.Start("Generating code")
1134 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
1135 self
.Progress
.Stop("done!")
1136 if Target
== "genc":
1139 if not self
.SkipAutoGen
or Target
== 'genmake':
1140 self
.Progress
.Start("Generating makefile")
1141 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
1142 self
.Progress
.Stop("done!")
1143 if Target
== "genmake":
1146 # always recreate top/platform makefile when clean, just in case of inconsistency
1147 AutoGenObject
.CreateCodeFile(False)
1148 AutoGenObject
.CreateMakeFile(False)
1150 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
1151 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
1153 BuildCommand
= AutoGenObject
.BuildCommand
1154 if BuildCommand
== None or len(BuildCommand
) == 0:
1155 EdkLogger
.error("build", OPTION_MISSING
,
1156 "No build command found for this module. "
1157 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
1158 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
1159 ExtraData
=str(AutoGenObject
))
1161 makefile
= GenMake
.BuildFile(AutoGenObject
)._FILE
_NAME
_[GenMake
.gMakeType
]
1165 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
1166 Command
= '.\SecMain'
1168 LaunchCommand(Command
, RunDir
)
1173 BuildCommand
= BuildCommand
+ [Target
]
1174 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
1175 self
.CreateAsBuiltInf()
1179 if Target
== 'libraries':
1180 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1181 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
1182 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1186 if Target
== 'modules':
1187 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1188 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
1189 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1190 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
1191 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Mod
, makefile
)), 'pbuild']
1192 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1193 self
.CreateAsBuiltInf()
1197 if Target
== 'cleanlib':
1198 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1199 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
1200 if os
.path
.exists(LibMakefile
):
1201 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
1202 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1206 if Target
== 'clean':
1207 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
1208 ModMakefile
= os
.path
.normpath(os
.path
.join(Mod
, makefile
))
1209 if os
.path
.exists(ModMakefile
):
1210 NewBuildCommand
= BuildCommand
+ ['-f', ModMakefile
, 'cleanall']
1211 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1212 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1213 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
1214 if os
.path
.exists(LibMakefile
):
1215 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
1216 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1220 if Target
== 'cleanall':
1222 #os.rmdir(AutoGenObject.BuildDir)
1223 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1224 except WindowsError, X
:
1225 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1228 ## Build a module or platform
1230 # Create autogen code and makefile for a module or platform, and the launch
1231 # "make" command to build it
1233 # @param Target The target of build command
1234 # @param Platform The platform file
1235 # @param Module The module file
1236 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
1237 # @param ToolChain The name of toolchain to build
1238 # @param Arch The arch of the module/platform
1239 # @param CreateDepModuleCodeFile Flag used to indicate creating code
1240 # for dependent modules/Libraries
1241 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
1242 # for dependent modules/Libraries
1244 def _Build(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
1245 if AutoGenObject
== None:
1248 # skip file generation for cleanxxx targets, run and fds target
1249 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1250 # for target which must generate AutoGen code and makefile
1251 if not self
.SkipAutoGen
or Target
== 'genc':
1252 self
.Progress
.Start("Generating code")
1253 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
1254 self
.Progress
.Stop("done!")
1255 if Target
== "genc":
1258 if not self
.SkipAutoGen
or Target
== 'genmake':
1259 self
.Progress
.Start("Generating makefile")
1260 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
1261 #AutoGenObject.CreateAsBuiltInf()
1262 self
.Progress
.Stop("done!")
1263 if Target
== "genmake":
1266 # always recreate top/platform makefile when clean, just in case of inconsistency
1267 AutoGenObject
.CreateCodeFile(False)
1268 AutoGenObject
.CreateMakeFile(False)
1270 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
1271 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
1273 BuildCommand
= AutoGenObject
.BuildCommand
1274 if BuildCommand
== None or len(BuildCommand
) == 0:
1275 EdkLogger
.error("build", OPTION_MISSING
,
1276 "No build command found for this module. "
1277 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
1278 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
1279 ExtraData
=str(AutoGenObject
))
1284 BuildCommand
= BuildCommand
+ [Target
]
1285 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
1286 self
.CreateAsBuiltInf()
1291 LaunchCommand(AutoGenObject
.GenFdsCommand
, AutoGenObject
.MakeFileDir
)
1296 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
1297 Command
= '.\SecMain'
1299 LaunchCommand(Command
, RunDir
)
1303 if Target
== 'libraries':
1310 if Target
== 'cleanall':
1312 #os.rmdir(AutoGenObject.BuildDir)
1313 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1314 except WindowsError, X
:
1315 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1318 ## Rebase module image and Get function address for the input module list.
1320 def _RebaseModule (self
, MapBuffer
, BaseAddress
, ModuleList
, AddrIsOffset
= True, ModeIsSmm
= False):
1322 AddrIsOffset
= False
1323 InfFileNameList
= ModuleList
.keys()
1324 #InfFileNameList.sort()
1325 for InfFile
in InfFileNameList
:
1326 sys
.stdout
.write (".")
1328 ModuleInfo
= ModuleList
[InfFile
]
1329 ModuleName
= ModuleInfo
.BaseName
1330 ModuleOutputImage
= ModuleInfo
.Image
.FileName
1331 ModuleDebugImage
= os
.path
.join(ModuleInfo
.DebugDir
, ModuleInfo
.BaseName
+ '.efi')
1332 ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1334 BaseAddress
= BaseAddress
- ModuleInfo
.Image
.Size
1336 # Update Image to new BaseAddress by GenFw tool
1338 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1339 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1342 # Set new address to the section header only for SMM driver.
1344 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1345 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1347 # Collect funtion address from Map file
1349 ImageMapTable
= ModuleOutputImage
.replace('.efi', '.map')
1351 if os
.path
.exists(ImageMapTable
):
1352 OrigImageBaseAddress
= 0
1353 ImageMap
= open(ImageMapTable
, 'r')
1354 for LinStr
in ImageMap
:
1355 if len (LinStr
.strip()) == 0:
1358 # Get the preferred address set on link time.
1360 if LinStr
.find ('Preferred load address is') != -1:
1361 StrList
= LinStr
.split()
1362 OrigImageBaseAddress
= int (StrList
[len(StrList
) - 1], 16)
1364 StrList
= LinStr
.split()
1365 if len (StrList
) > 4:
1366 if StrList
[3] == 'f' or StrList
[3] == 'F':
1368 RelativeAddress
= int (StrList
[2], 16) - OrigImageBaseAddress
1369 FunctionList
.append ((Name
, RelativeAddress
))
1370 if ModuleInfo
.Arch
== 'IPF' and Name
.endswith('_ModuleEntryPoint'):
1372 # Get the real entry point address for IPF image.
1374 ModuleInfo
.Image
.EntryPoint
= RelativeAddress
1377 # Add general information.
1380 MapBuffer
.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1382 MapBuffer
.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName
, 0 - BaseAddress
, 0 - (BaseAddress
+ ModuleInfo
.Image
.EntryPoint
)))
1384 MapBuffer
.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1386 # Add guid and general seciton section.
1388 TextSectionAddress
= 0
1389 DataSectionAddress
= 0
1390 for SectionHeader
in ModuleInfo
.Image
.SectionHeaderList
:
1391 if SectionHeader
[0] == '.text':
1392 TextSectionAddress
= SectionHeader
[1]
1393 elif SectionHeader
[0] in ['.data', '.sdata']:
1394 DataSectionAddress
= SectionHeader
[1]
1396 MapBuffer
.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo
.Guid
, 0 - (BaseAddress
+ TextSectionAddress
), 0 - (BaseAddress
+ DataSectionAddress
)))
1398 MapBuffer
.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo
.Guid
, BaseAddress
+ TextSectionAddress
, BaseAddress
+ DataSectionAddress
))
1400 # Add debug image full path.
1402 MapBuffer
.write('(IMAGE=%s)\n\n' % (ModuleDebugImage
))
1404 # Add funtion address
1406 for Function
in FunctionList
:
1408 MapBuffer
.write(' -0x%010X %s\n' % (0 - (BaseAddress
+ Function
[1]), Function
[0]))
1410 MapBuffer
.write(' 0x%010X %s\n' % (BaseAddress
+ Function
[1], Function
[0]))
1414 # for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1417 BaseAddress
= BaseAddress
+ ModuleInfo
.Image
.Size
1419 ## Collect MAP information of all FVs
1421 def _CollectFvMapBuffer (self
, MapBuffer
, Wa
, ModuleList
):
1423 # First get the XIP base address for FV map file.
1424 GuidPattern
= re
.compile("[-a-fA-F0-9]+")
1425 GuidName
= re
.compile("\(GUID=[-a-fA-F0-9]+")
1426 for FvName
in Wa
.FdfProfile
.FvDict
.keys():
1427 FvMapBuffer
= os
.path
.join(Wa
.FvDir
, FvName
+ '.Fv.map')
1428 if not os
.path
.exists(FvMapBuffer
):
1430 FvMap
= open(FvMapBuffer
, 'r')
1431 #skip FV size information
1437 MatchGuid
= GuidPattern
.match(Line
)
1438 if MatchGuid
!= None:
1440 # Replace GUID with module name
1442 GuidString
= MatchGuid
.group()
1443 if GuidString
.upper() in ModuleList
:
1444 Line
= Line
.replace(GuidString
, ModuleList
[GuidString
.upper()].Name
)
1445 MapBuffer
.write('%s' % (Line
))
1447 # Add the debug image full path.
1449 MatchGuid
= GuidName
.match(Line
)
1450 if MatchGuid
!= None:
1451 GuidString
= MatchGuid
.group().split("=")[1]
1452 if GuidString
.upper() in ModuleList
:
1453 MapBuffer
.write('(IMAGE=%s)\n' % (os
.path
.join(ModuleList
[GuidString
.upper()].DebugDir
, ModuleList
[GuidString
.upper()].Name
+ '.efi')))
1457 ## Collect MAP information of all modules
1459 def _CollectModuleMapBuffer (self
, MapBuffer
, ModuleList
):
1460 sys
.stdout
.write ("Generate Load Module At Fix Address Map")
1462 PatchEfiImageList
= []
1470 # reserve 4K size in SMRAM to make SMM module address not from 0.
1472 IsIpfPlatform
= False
1473 if 'IPF' in self
.ArchList
:
1474 IsIpfPlatform
= True
1475 for ModuleGuid
in ModuleList
:
1476 Module
= ModuleList
[ModuleGuid
]
1477 GlobalData
.gProcessingFile
= "%s [%s, %s, %s]" % (Module
.MetaFile
, Module
.Arch
, Module
.ToolChain
, Module
.BuildTarget
)
1479 OutputImageFile
= ''
1480 for ResultFile
in Module
.CodaTargetList
:
1481 if str(ResultFile
.Target
).endswith('.efi'):
1483 # module list for PEI, DXE, RUNTIME and SMM
1485 OutputImageFile
= os
.path
.join(Module
.OutputDir
, Module
.Name
+ '.efi')
1486 ImageClass
= PeImageClass (OutputImageFile
)
1487 if not ImageClass
.IsValid
:
1488 EdkLogger
.error("build", FILE_PARSE_FAILURE
, ExtraData
=ImageClass
.ErrorInfo
)
1489 ImageInfo
= PeImageInfo(Module
.Name
, Module
.Guid
, Module
.Arch
, Module
.OutputDir
, Module
.DebugDir
, ImageClass
)
1490 if Module
.ModuleType
in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER', 'PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
1491 PeiModuleList
[Module
.MetaFile
] = ImageInfo
1492 PeiSize
+= ImageInfo
.Image
.Size
1493 elif Module
.ModuleType
in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
1494 BtModuleList
[Module
.MetaFile
] = ImageInfo
1495 BtSize
+= ImageInfo
.Image
.Size
1496 elif Module
.ModuleType
in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
1497 RtModuleList
[Module
.MetaFile
] = ImageInfo
1498 #IPF runtime driver needs to be at 2 page alignment.
1499 if IsIpfPlatform
and ImageInfo
.Image
.Size
% 0x2000 != 0:
1500 ImageInfo
.Image
.Size
= (ImageInfo
.Image
.Size
/ 0x2000 + 1) * 0x2000
1501 RtSize
+= ImageInfo
.Image
.Size
1502 elif Module
.ModuleType
in ['SMM_CORE', 'DXE_SMM_DRIVER']:
1503 SmmModuleList
[Module
.MetaFile
] = ImageInfo
1504 SmmSize
+= ImageInfo
.Image
.Size
1505 if Module
.ModuleType
== 'DXE_SMM_DRIVER':
1506 PiSpecVersion
= '0x00000000'
1507 if 'PI_SPECIFICATION_VERSION' in Module
.Module
.Specification
:
1508 PiSpecVersion
= Module
.Module
.Specification
['PI_SPECIFICATION_VERSION']
1509 # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
1510 if int(PiSpecVersion
, 16) < 0x0001000A:
1511 BtModuleList
[Module
.MetaFile
] = ImageInfo
1512 BtSize
+= ImageInfo
.Image
.Size
1515 # EFI image is final target.
1516 # Check EFI image contains patchable FixAddress related PCDs.
1518 if OutputImageFile
!= '':
1519 ModuleIsPatch
= False
1520 for Pcd
in Module
.ModulePcdList
:
1521 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1522 ModuleIsPatch
= True
1524 if not ModuleIsPatch
:
1525 for Pcd
in Module
.LibraryPcdList
:
1526 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1527 ModuleIsPatch
= True
1530 if not ModuleIsPatch
:
1533 # Module includes the patchable load fix address PCDs.
1534 # It will be fixed up later.
1536 PatchEfiImageList
.append (OutputImageFile
)
1539 # Get Top Memory address
1541 ReservedRuntimeMemorySize
= 0
1542 TopMemoryAddress
= 0
1543 if self
.LoadFixAddress
== 0xFFFFFFFFFFFFFFFF:
1544 TopMemoryAddress
= 0
1546 TopMemoryAddress
= self
.LoadFixAddress
1547 if TopMemoryAddress
< RtSize
+ BtSize
+ PeiSize
:
1548 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
1549 # Make IPF runtime driver at 2 page alignment.
1551 ReservedRuntimeMemorySize
= TopMemoryAddress
% 0x2000
1552 RtSize
= RtSize
+ ReservedRuntimeMemorySize
1555 # Patch FixAddress related PCDs into EFI image
1557 for EfiImage
in PatchEfiImageList
:
1558 EfiImageMap
= EfiImage
.replace('.efi', '.map')
1559 if not os
.path
.exists(EfiImageMap
):
1562 # Get PCD offset in EFI image by GenPatchPcdTable function
1564 PcdTable
= parsePcdInfoFromMapFile(EfiImageMap
, EfiImage
)
1566 # Patch real PCD value by PatchPcdValue tool
1568 for PcdInfo
in PcdTable
:
1570 if PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE
:
1571 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE
, str (PeiSize
/ 0x1000))
1572 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE
:
1573 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE
, str (BtSize
/ 0x1000))
1574 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE
:
1575 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE
, str (RtSize
/ 0x1000))
1576 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE
and len (SmmModuleList
) > 0:
1577 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE
, str (SmmSize
/ 0x1000))
1578 if ReturnValue
!= 0:
1579 EdkLogger
.error("build", PARAMETER_INVALID
, "Patch PCD value failed", ExtraData
=ErrorInfo
)
1581 MapBuffer
.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize
/ 0x1000))
1582 MapBuffer
.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize
/ 0x1000))
1583 MapBuffer
.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize
/ 0x1000))
1584 if len (SmmModuleList
) > 0:
1585 MapBuffer
.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize
/ 0x1000))
1587 PeiBaseAddr
= TopMemoryAddress
- RtSize
- BtSize
1588 BtBaseAddr
= TopMemoryAddress
- RtSize
1589 RtBaseAddr
= TopMemoryAddress
- ReservedRuntimeMemorySize
1591 self
._RebaseModule
(MapBuffer
, PeiBaseAddr
, PeiModuleList
, TopMemoryAddress
== 0)
1592 self
._RebaseModule
(MapBuffer
, BtBaseAddr
, BtModuleList
, TopMemoryAddress
== 0)
1593 self
._RebaseModule
(MapBuffer
, RtBaseAddr
, RtModuleList
, TopMemoryAddress
== 0)
1594 self
._RebaseModule
(MapBuffer
, 0x1000, SmmModuleList
, AddrIsOffset
=False, ModeIsSmm
=True)
1595 MapBuffer
.write('\n\n')
1596 sys
.stdout
.write ("\n")
1599 ## Save platform Map file
1601 def _SaveMapFile (self
, MapBuffer
, Wa
):
1603 # Map file path is got.
1605 MapFilePath
= os
.path
.join(Wa
.BuildDir
, Wa
.Name
+ '.map')
1607 # Save address map into MAP file.
1609 SaveFileOnChange(MapFilePath
, MapBuffer
.getvalue(), False)
1611 if self
.LoadFixAddress
!= 0:
1612 sys
.stdout
.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath
))
1615 ## Build active platform for different build targets and different tool chains
1617 def _BuildPlatform(self
):
1618 SaveFileOnChange(self
.PlatformBuildPath
, '# DO NOT EDIT \n# FILE auto-generated\n', False)
1619 for BuildTarget
in self
.BuildTargetList
:
1620 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1622 for ToolChain
in self
.ToolChainList
:
1623 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1624 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1625 GlobalData
.gGlobalDefines
['FAMILY'] = self
.ToolChainFamily
[index
]
1627 Wa
= WorkspaceAutoGen(
1644 self
.Fdf
= Wa
.FdfFile
1645 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1646 self
.BuildReport
.AddPlatformReport(Wa
)
1647 self
.Progress
.Stop("done!")
1648 for Arch
in Wa
.ArchList
:
1649 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1650 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1651 for Module
in Pa
.Platform
.Modules
:
1652 # Get ModuleAutoGen object to generate C code file and makefile
1653 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1656 self
.BuildModules
.append(Ma
)
1657 self
._BuildPa
(self
.Target
, Pa
)
1659 # Create MAP file when Load Fix Address is enabled.
1660 if self
.Target
in ["", "all", "fds"]:
1661 for Arch
in Wa
.ArchList
:
1662 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1664 # Check whether the set fix address is above 4G for 32bit image.
1666 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1667 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
1672 for Pa
in Wa
.AutoGenObjectList
:
1673 for Ma
in Pa
.ModuleAutoGenList
:
1676 if not Ma
.IsLibrary
:
1677 ModuleList
[Ma
.Guid
.upper()] = Ma
1679 MapBuffer
= StringIO('')
1680 if self
.LoadFixAddress
!= 0:
1682 # Rebase module to the preferred memory address before GenFds
1684 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1687 # create FDS again for the updated EFI image
1689 self
._Build
("fds", Wa
)
1691 # Create MAP file for all platform FVs after GenFds.
1693 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1695 # Save MAP buffer into MAP file.
1697 self
._SaveMapFile
(MapBuffer
, Wa
)
1699 ## Build active module for different build targets, different tool chains and different archs
1701 def _BuildModule(self
):
1702 for BuildTarget
in self
.BuildTargetList
:
1703 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1705 for ToolChain
in self
.ToolChainList
:
1706 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1707 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1708 GlobalData
.gGlobalDefines
['FAMILY'] = self
.ToolChainFamily
[index
]
1711 # module build needs platform build information, so get platform
1714 Wa
= WorkspaceAutoGen(
1732 self
.Fdf
= Wa
.FdfFile
1733 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1734 Wa
.CreateMakeFile(False)
1735 self
.Progress
.Stop("done!")
1737 for Arch
in Wa
.ArchList
:
1738 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1739 Ma
= ModuleAutoGen(Wa
, self
.ModuleFile
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1740 if Ma
== None: continue
1742 self
.BuildModules
.append(Ma
)
1743 if not Ma
.IsBinaryModule
:
1744 self
._Build
(self
.Target
, Ma
, BuildModule
=True)
1746 self
.BuildReport
.AddPlatformReport(Wa
, MaList
)
1751 "Module for [%s] is not a component of active platform."\
1752 " Please make sure that the ARCH and inf file path are"\
1753 " given in the same as in [%s]" % \
1754 (', '.join(Wa
.ArchList
), self
.PlatformFile
),
1755 ExtraData
=self
.ModuleFile
1757 # Create MAP file when Load Fix Address is enabled.
1758 if self
.Target
== "fds" and self
.Fdf
:
1759 for Arch
in Wa
.ArchList
:
1761 # Check whether the set fix address is above 4G for 32bit image.
1763 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1764 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1769 for Pa
in Wa
.AutoGenObjectList
:
1770 for Ma
in Pa
.ModuleAutoGenList
:
1773 if not Ma
.IsLibrary
:
1774 ModuleList
[Ma
.Guid
.upper()] = Ma
1776 MapBuffer
= StringIO('')
1777 if self
.LoadFixAddress
!= 0:
1779 # Rebase module to the preferred memory address before GenFds
1781 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1783 # create FDS again for the updated EFI image
1785 self
._Build
("fds", Wa
)
1787 # Create MAP file for all platform FVs after GenFds.
1789 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1791 # Save MAP buffer into MAP file.
1793 self
._SaveMapFile
(MapBuffer
, Wa
)
1795 ## Build a platform in multi-thread mode
1797 def _MultiThreadBuildPlatform(self
):
1798 SaveFileOnChange(self
.PlatformBuildPath
, '# DO NOT EDIT \n# FILE auto-generated\n', False)
1799 for BuildTarget
in self
.BuildTargetList
:
1800 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1802 for ToolChain
in self
.ToolChainList
:
1803 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1804 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1805 GlobalData
.gGlobalDefines
['FAMILY'] = self
.ToolChainFamily
[index
]
1807 Wa
= WorkspaceAutoGen(
1824 self
.Fdf
= Wa
.FdfFile
1825 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1826 self
.BuildReport
.AddPlatformReport(Wa
)
1827 Wa
.CreateMakeFile(False)
1829 # multi-thread exit flag
1830 ExitFlag
= threading
.Event()
1832 for Arch
in Wa
.ArchList
:
1833 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1834 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1838 for Inf
in Pa
.Platform
.Modules
:
1839 ModuleList
.append(Inf
)
1840 # Add the INF only list in FDF
1841 if GlobalData
.gFdfParser
!= None:
1842 for InfName
in GlobalData
.gFdfParser
.Profile
.InfList
:
1843 Inf
= PathClass(NormPath(InfName
), self
.WorkspaceDir
, Arch
)
1844 if Inf
in Pa
.Platform
.Modules
:
1846 ModuleList
.append(Inf
)
1847 for Module
in ModuleList
:
1848 # Get ModuleAutoGen object to generate C code file and makefile
1849 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1853 # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
1854 if self
.Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1855 # for target which must generate AutoGen code and makefile
1856 if not self
.SkipAutoGen
or self
.Target
== 'genc':
1857 Ma
.CreateCodeFile(True)
1858 if self
.Target
== "genc":
1861 if not self
.SkipAutoGen
or self
.Target
== 'genmake':
1862 Ma
.CreateMakeFile(True)
1863 if self
.Target
== "genmake":
1865 self
.BuildModules
.append(Ma
)
1866 self
.Progress
.Stop("done!")
1868 for Ma
in self
.BuildModules
:
1869 # Generate build task for the module
1870 if not Ma
.IsBinaryModule
:
1871 Bt
= BuildTask
.New(ModuleMakeUnit(Ma
, self
.Target
))
1872 # Break build if any build thread has error
1873 if BuildTask
.HasError():
1874 # we need a full version of makefile for platform
1876 BuildTask
.WaitForComplete()
1877 Pa
.CreateMakeFile(False)
1878 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1879 # Start task scheduler
1880 if not BuildTask
.IsOnGoing():
1881 BuildTask
.StartScheduler(self
.ThreadNumber
, ExitFlag
)
1883 # in case there's an interruption. we need a full version of makefile for platform
1884 Pa
.CreateMakeFile(False)
1885 if BuildTask
.HasError():
1886 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1889 # Save temp tables to a TmpTableDict.
1891 for Key
in Wa
.BuildDatabase
._CACHE
_:
1892 if Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
:
1893 if TemporaryTablePattern
.match(Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
):
1894 TmpTableDict
[Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
] = Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Cur
1897 # All modules have been put in build tasks queue. Tell task scheduler
1898 # to exit if all tasks are completed
1901 BuildTask
.WaitForComplete()
1902 self
.CreateAsBuiltInf()
1905 # Check for build error, and raise exception if one
1906 # has been signaled.
1908 if BuildTask
.HasError():
1909 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1911 # Create MAP file when Load Fix Address is enabled.
1912 if self
.Target
in ["", "all", "fds"]:
1913 for Arch
in Wa
.ArchList
:
1915 # Check whether the set fix address is above 4G for 32bit image.
1917 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1918 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1923 for Pa
in Wa
.AutoGenObjectList
:
1924 for Ma
in Pa
.ModuleAutoGenList
:
1927 if not Ma
.IsLibrary
:
1928 ModuleList
[Ma
.Guid
.upper()] = Ma
1930 # Rebase module to the preferred memory address before GenFds
1932 MapBuffer
= StringIO('')
1933 if self
.LoadFixAddress
!= 0:
1934 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1938 # Generate FD image if there's a FDF file found
1940 LaunchCommand(Wa
.GenFdsCommand
, os
.getcwd())
1943 # Create MAP file for all platform FVs after GenFds.
1945 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1947 # Save MAP buffer into MAP file.
1949 self
._SaveMapFile
(MapBuffer
, Wa
)
1951 ## Generate GuidedSectionTools.txt in the FV directories.
1953 def CreateGuidedSectionToolsFile(self
):
1954 for BuildTarget
in self
.BuildTargetList
:
1955 for ToolChain
in self
.ToolChainList
:
1956 Wa
= WorkspaceAutoGen(
1973 if not os
.path
.exists(FvDir
):
1976 for Arch
in self
.ArchList
:
1977 # Build up the list of supported architectures for this build
1978 prefix
= '%s_%s_%s_' % (BuildTarget
, ToolChain
, Arch
)
1980 # Look through the tool definitions for GUIDed tools
1982 for (attrib
, value
) in self
.ToolDef
.ToolsDefTxtDictionary
.iteritems():
1983 if attrib
.upper().endswith('_GUID'):
1984 split
= attrib
.split('_')
1985 thisPrefix
= '_'.join(split
[0:3]) + '_'
1986 if thisPrefix
== prefix
:
1987 guid
= self
.ToolDef
.ToolsDefTxtDictionary
[attrib
]
1990 path
= '_'.join(split
[0:4]) + '_PATH'
1991 path
= self
.ToolDef
.ToolsDefTxtDictionary
[path
]
1992 path
= self
.GetFullPathOfTool(path
)
1993 guidAttribs
.append((guid
, toolName
, path
))
1995 # Write out GuidedSecTools.txt
1996 toolsFile
= os
.path
.join(FvDir
, 'GuidedSectionTools.txt')
1997 toolsFile
= open(toolsFile
, 'wt')
1998 for guidedSectionTool
in guidAttribs
:
1999 print >> toolsFile
, ' '.join(guidedSectionTool
)
2002 ## Returns the full path of the tool.
2004 def GetFullPathOfTool (self
, tool
):
2005 if os
.path
.exists(tool
):
2006 return os
.path
.realpath(tool
)
2008 # We need to search for the tool using the
2009 # PATH environment variable.
2010 for dirInPath
in os
.environ
['PATH'].split(os
.pathsep
):
2011 foundPath
= os
.path
.join(dirInPath
, tool
)
2012 if os
.path
.exists(foundPath
):
2013 return os
.path
.realpath(foundPath
)
2015 # If the tool was not found in the path then we just return
2019 ## Launch the module or platform build
2022 if not self
.ModuleFile
:
2023 if not self
.SpawnMode
or self
.Target
not in ["", "all"]:
2024 self
.SpawnMode
= False
2025 self
._BuildPlatform
()
2027 self
._MultiThreadBuildPlatform
()
2028 self
.CreateGuidedSectionToolsFile()
2030 self
.SpawnMode
= False
2033 if self
.Target
== 'cleanall':
2035 RemoveDirectory(os
.path
.dirname(GlobalData
.gDatabasePath
), True)
2037 def CreateAsBuiltInf(self
):
2038 for Module
in self
.BuildModules
:
2039 Module
.CreateAsBuiltInf()
2040 self
.BuildModules
= []
2041 ## Do some clean-up works when error occurred
2042 def Relinquish(self
):
2043 OldLogLevel
= EdkLogger
.GetLevel()
2044 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
2045 #self.DumpBuildData()
2046 Utils
.Progressor
.Abort()
2047 if self
.SpawnMode
== True:
2049 EdkLogger
.SetLevel(OldLogLevel
)
2051 def DumpBuildData(self
):
2052 CacheDirectory
= os
.path
.dirname(GlobalData
.gDatabasePath
)
2053 Utils
.CreateDirectory(CacheDirectory
)
2054 Utils
.DataDump(Utils
.gFileTimeStampCache
, os
.path
.join(CacheDirectory
, "gFileTimeStampCache"))
2055 Utils
.DataDump(Utils
.gDependencyDatabase
, os
.path
.join(CacheDirectory
, "gDependencyDatabase"))
2057 def RestoreBuildData(self
):
2058 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gFileTimeStampCache")
2059 if Utils
.gFileTimeStampCache
== {} and os
.path
.isfile(FilePath
):
2060 Utils
.gFileTimeStampCache
= Utils
.DataRestore(FilePath
)
2061 if Utils
.gFileTimeStampCache
== None:
2062 Utils
.gFileTimeStampCache
= {}
2064 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gDependencyDatabase")
2065 if Utils
.gDependencyDatabase
== {} and os
.path
.isfile(FilePath
):
2066 Utils
.gDependencyDatabase
= Utils
.DataRestore(FilePath
)
2067 if Utils
.gDependencyDatabase
== None:
2068 Utils
.gDependencyDatabase
= {}
2070 def ParseDefines(DefineList
=[]):
2072 if DefineList
!= None:
2073 for Define
in DefineList
:
2074 DefineTokenList
= Define
.split("=", 1)
2075 if not GlobalData
.gMacroNamePattern
.match(DefineTokenList
[0]):
2076 EdkLogger
.error('build', FORMAT_INVALID
,
2077 "The macro name must be in the pattern [A-Z][A-Z0-9_]*",
2078 ExtraData
=DefineTokenList
[0])
2080 if len(DefineTokenList
) == 1:
2081 DefineDict
[DefineTokenList
[0]] = "TRUE"
2083 DefineDict
[DefineTokenList
[0]] = DefineTokenList
[1].strip()
2087 def SingleCheckCallback(option
, opt_str
, value
, parser
):
2088 if option
not in gParamCheck
:
2089 setattr(parser
.values
, option
.dest
, value
)
2090 gParamCheck
.append(option
)
2092 parser
.error("Option %s only allows one instance in command line!" % option
)
2094 ## Parse command line options
2096 # Using standard Python module optparse to parse command line option of this tool.
2098 # @retval Opt A optparse.Values object containing the parsed options
2099 # @retval Args Target of build command
2101 def MyOptionParser():
2102 Parser
= OptionParser(description
=__copyright__
, version
=__version__
, prog
="build.exe", usage
="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
2103 Parser
.add_option("-a", "--arch", action
="append", type="choice", choices
=['IA32', 'X64', 'IPF', 'EBC', 'ARM', 'AARCH64'], dest
="TargetArch",
2104 help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
2105 Parser
.add_option("-p", "--platform", action
="callback", type="string", dest
="PlatformFile", callback
=SingleCheckCallback
,
2106 help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
2107 Parser
.add_option("-m", "--module", action
="callback", type="string", dest
="ModuleFile", callback
=SingleCheckCallback
,
2108 help="Build the module specified by the INF file name argument.")
2109 Parser
.add_option("-b", "--buildtarget", type="string", dest
="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
2111 Parser
.add_option("-t", "--tagname", action
="append", type="string", dest
="ToolChain",
2112 help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
2113 Parser
.add_option("-x", "--sku-id", action
="callback", type="string", dest
="SkuId", callback
=SingleCheckCallback
,
2114 help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
2116 Parser
.add_option("-n", action
="callback", type="int", dest
="ThreadNumber", callback
=SingleCheckCallback
,
2117 help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
2119 Parser
.add_option("-f", "--fdf", action
="callback", type="string", dest
="FdfFile", callback
=SingleCheckCallback
,
2120 help="The name of the FDF file to use, which overrides the setting in the DSC file.")
2121 Parser
.add_option("-r", "--rom-image", action
="append", type="string", dest
="RomImage", default
=[],
2122 help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
2123 Parser
.add_option("-i", "--fv-image", action
="append", type="string", dest
="FvImage", default
=[],
2124 help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
2125 Parser
.add_option("-C", "--capsule-image", action
="append", type="string", dest
="CapName", default
=[],
2126 help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
2127 Parser
.add_option("-u", "--skip-autogen", action
="store_true", dest
="SkipAutoGen", help="Skip AutoGen step.")
2128 Parser
.add_option("-e", "--re-parse", action
="store_true", dest
="Reparse", help="Re-parse all meta-data files.")
2130 Parser
.add_option("-c", "--case-insensitive", action
="store_true", dest
="CaseInsensitive", default
=False, help="Don't check case of file name.")
2132 Parser
.add_option("-w", "--warning-as-error", action
="store_true", dest
="WarningAsError", help="Treat warning in tools as error.")
2133 Parser
.add_option("-j", "--log", action
="store", dest
="LogFile", help="Put log in specified file as well as on console.")
2135 Parser
.add_option("-s", "--silent", action
="store_true", type=None, dest
="SilentMode",
2136 help="Make use of silent mode of (n)make.")
2137 Parser
.add_option("-q", "--quiet", action
="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
2138 Parser
.add_option("-v", "--verbose", action
="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
2139 "including library instances selected, final dependency expression, "\
2140 "and warning messages, etc.")
2141 Parser
.add_option("-d", "--debug", action
="store", type="int", help="Enable debug messages at specified level.")
2142 Parser
.add_option("-D", "--define", action
="append", type="string", dest
="Macros", help="Macro: \"Name [= Value]\".")
2144 Parser
.add_option("-y", "--report-file", action
="store", dest
="ReportFile", help="Create/overwrite the report to the specified filename.")
2145 Parser
.add_option("-Y", "--report-type", action
="append", type="choice", choices
=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS','HASH','EXECUTION_ORDER'], dest
="ReportType", default
=[],
2146 help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, HASH, EXECUTION_ORDER]. "\
2147 "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
2148 Parser
.add_option("-F", "--flag", action
="store", type="string", dest
="Flag",
2149 help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
2150 "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
2151 "will override the setting in [BuildOptions] section of platform DSC.")
2152 Parser
.add_option("-N", "--no-cache", action
="store_true", dest
="DisableCache", default
=False, help="Disable build cache mechanism")
2153 Parser
.add_option("--conf", action
="store", type="string", dest
="ConfDirectory", help="Specify the customized Conf directory.")
2154 Parser
.add_option("--check-usage", action
="store_true", dest
="CheckUsage", default
=False, help="Check usage content of entries listed in INF file.")
2155 Parser
.add_option("--ignore-sources", action
="store_true", dest
="IgnoreSources", default
=False, help="Focus to a binary build and ignore all source files")
2156 Parser
.add_option("--pcd", action
="append", dest
="OptionPcd", help="Set PCD value by command line. Format: \"PcdName=Value\" ")
2157 Parser
.add_option("-l", "--cmd-len", action
="store", type="int", dest
="CommandLength", help="Specify the maximum line length of build command. Default is 4096.")
2159 (Opt
, Args
) = Parser
.parse_args()
2162 ## Tool entrance method
2164 # This method mainly dispatch specific methods per the command line options.
2165 # If no error found, return zero value so the caller of this tool can know
2166 # if it's executed successfully or not.
2168 # @retval 0 Tool was successful
2169 # @retval 1 Tool failed
2172 StartTime
= time
.time()
2174 # Initialize log system
2175 EdkLogger
.Initialize()
2176 GlobalData
.gCommand
= sys
.argv
[1:]
2178 # Parse the options and args
2180 (Option
, Target
) = MyOptionParser()
2181 GlobalData
.gOptions
= Option
2182 GlobalData
.gCaseInsensitive
= Option
.CaseInsensitive
2185 if Option
.verbose
!= None:
2186 EdkLogger
.SetLevel(EdkLogger
.VERBOSE
)
2187 elif Option
.quiet
!= None:
2188 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
2189 elif Option
.debug
!= None:
2190 EdkLogger
.SetLevel(Option
.debug
+ 1)
2192 EdkLogger
.SetLevel(EdkLogger
.INFO
)
2194 if Option
.LogFile
!= None:
2195 EdkLogger
.SetLogFile(Option
.LogFile
)
2197 if Option
.WarningAsError
== True:
2198 EdkLogger
.SetWarningAsError()
2200 if platform
.platform().find("Windows") >= 0:
2201 GlobalData
.gIsWindows
= True
2203 GlobalData
.gIsWindows
= False
2205 EdkLogger
.quiet("Build environment: %s" % platform
.platform())
2206 EdkLogger
.quiet(time
.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time
.localtime()));
2211 if len(Target
) == 0:
2213 elif len(Target
) >= 2:
2214 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "More than one targets are not supported.",
2215 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
2217 Target
= Target
[0].lower()
2219 if Target
not in gSupportedTarget
:
2220 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "Not supported target [%s]." % Target
,
2221 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
2224 # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
2227 GlobalData
.gCommandLineDefines
.update(ParseDefines(Option
.Macros
))
2229 Workspace
= os
.getenv("WORKSPACE")
2231 # Get files real name in workspace dir
2233 GlobalData
.gAllFiles
= Utils
.DirCache(Workspace
)
2235 WorkingDirectory
= os
.getcwd()
2236 if not Option
.ModuleFile
:
2237 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.inf')))
2238 FileNum
= len(FileList
)
2240 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "There are %d INF files in %s." % (FileNum
, WorkingDirectory
),
2241 ExtraData
="Please use '-m <INF_FILE_PATH>' switch to choose one.")
2243 Option
.ModuleFile
= NormFile(FileList
[0], Workspace
)
2245 if Option
.ModuleFile
:
2246 if os
.path
.isabs (Option
.ModuleFile
):
2247 if os
.path
.normcase (os
.path
.normpath(Option
.ModuleFile
)).find (Workspace
) == 0:
2248 Option
.ModuleFile
= NormFile(os
.path
.normpath(Option
.ModuleFile
), Workspace
)
2249 Option
.ModuleFile
= PathClass(Option
.ModuleFile
, Workspace
)
2250 ErrorCode
, ErrorInfo
= Option
.ModuleFile
.Validate(".inf", False)
2252 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2254 if Option
.PlatformFile
!= None:
2255 if os
.path
.isabs (Option
.PlatformFile
):
2256 if os
.path
.normcase (os
.path
.normpath(Option
.PlatformFile
)).find (Workspace
) == 0:
2257 Option
.PlatformFile
= NormFile(os
.path
.normpath(Option
.PlatformFile
), Workspace
)
2258 Option
.PlatformFile
= PathClass(Option
.PlatformFile
, Workspace
)
2260 if Option
.FdfFile
!= None:
2261 if os
.path
.isabs (Option
.FdfFile
):
2262 if os
.path
.normcase (os
.path
.normpath(Option
.FdfFile
)).find (Workspace
) == 0:
2263 Option
.FdfFile
= NormFile(os
.path
.normpath(Option
.FdfFile
), Workspace
)
2264 Option
.FdfFile
= PathClass(Option
.FdfFile
, Workspace
)
2265 ErrorCode
, ErrorInfo
= Option
.FdfFile
.Validate(".fdf", False)
2267 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2269 if Option
.Flag
!= None and Option
.Flag
not in ['-c', '-s']:
2270 EdkLogger
.error("build", OPTION_VALUE_INVALID
, "UNI flag must be one of -c or -s")
2272 MyBuild
= Build(Target
, Workspace
, Option
)
2273 GlobalData
.gCommandLineDefines
['ARCH'] = ' '.join(MyBuild
.ArchList
)
2274 if not (MyBuild
.LaunchPrebuildFlag
and os
.path
.exists(MyBuild
.PlatformBuildPath
)):
2276 # Drop temp tables to avoid database locked.
2277 for TmpTableName
in TmpTableDict
:
2278 SqlCommand
= """drop table IF EXISTS %s""" % TmpTableName
2279 TmpTableDict
[TmpTableName
].execute(SqlCommand
)
2280 #MyBuild.DumpBuildData()
2282 # All job done, no error found and no exception raised
2285 except FatalError
, X
:
2287 # for multi-thread build exits safely
2288 MyBuild
.Relinquish()
2289 if Option
!= None and Option
.debug
!= None:
2290 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2291 ReturnCode
= X
.args
[0]
2293 # error from Fdf parser
2295 # for multi-thread build exits safely
2296 MyBuild
.Relinquish()
2297 if Option
!= None and Option
.debug
!= None:
2298 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2300 EdkLogger
.error(X
.ToolName
, FORMAT_INVALID
, File
=X
.FileName
, Line
=X
.LineNumber
, ExtraData
=X
.Message
, RaiseError
=False)
2301 ReturnCode
= FORMAT_INVALID
2302 except KeyboardInterrupt:
2303 ReturnCode
= ABORT_ERROR
2304 if Option
!= None and Option
.debug
!= None:
2305 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2308 # for multi-thread build exits safely
2309 MyBuild
.Relinquish()
2311 # try to get the meta-file from the object causing exception
2312 Tb
= sys
.exc_info()[-1]
2313 MetaFile
= GlobalData
.gProcessingFile
2315 if 'self' in Tb
.tb_frame
.f_locals
and hasattr(Tb
.tb_frame
.f_locals
['self'], 'MetaFile'):
2316 MetaFile
= Tb
.tb_frame
.f_locals
['self'].MetaFile
2321 "Unknown fatal error when processing [%s]" % MetaFile
,
2322 ExtraData
="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",
2325 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2326 ReturnCode
= CODE_ERROR
2328 Utils
.Progressor
.Abort()
2329 Utils
.ClearDuplicatedInf()
2333 MyBuild
.LaunchPostbuild()
2336 Conclusion
= "Failed"
2337 elif ReturnCode
== ABORT_ERROR
:
2338 Conclusion
= "Aborted"
2340 Conclusion
= "Failed"
2341 FinishTime
= time
.time()
2342 BuildDuration
= time
.gmtime(int(round(FinishTime
- StartTime
)))
2343 BuildDurationStr
= ""
2344 if BuildDuration
.tm_yday
> 1:
2345 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
) + ", %d day(s)" % (BuildDuration
.tm_yday
- 1)
2347 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
)
2350 MyBuild
.BuildReport
.GenerateReport(BuildDurationStr
)
2352 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
2353 EdkLogger
.quiet("\n- %s -" % Conclusion
)
2354 EdkLogger
.quiet(time
.strftime("Build end time: %H:%M:%S, %b.%d %Y", time
.localtime()))
2355 EdkLogger
.quiet("Build total time: %s\n" % BuildDurationStr
)
2358 if __name__
== '__main__':
2360 ## 0-127 is a safe return range, and 1 is a standard default error
2361 if r
< 0 or r
> 127: r
= 1