Xen console SerialPortLib instance\r
\r
Copyright (c) 2015, Linaro Ltd. All rights reserved.<BR>\r
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
**/\r
\r
#include <Base.h>\r
-#include <Uefi/UefiBaseType.h>\r
\r
#include <Library/BaseLib.h>\r
#include <Library/SerialPortLib.h>\r
#include <IndustryStandard/Xen/hvm/params.h>\r
#include <IndustryStandard/Xen/event_channel.h>\r
\r
+//\r
+// We can't use DebugLib due to a constructor dependency cycle between DebugLib\r
+// and ourselves.\r
+//\r
+#define ASSERT(Expression) \\r
+ do { \\r
+ if (!(Expression)) { \\r
+ CpuDeadLoop (); \\r
+ } \\r
+ } while (FALSE)\r
+\r
//\r
// The code below expects these global variables to be mutable, even in the case\r
// that we have been incorporated into SEC or PEIM phase modules (which is\r
STATIC evtchn_send_t mXenConsoleEventChain;\r
STATIC struct xencons_interface *mXenConsoleInterface;\r
\r
+/**\r
+ Initialize the serial device hardware.\r
+\r
+ If no initialization is required, then return RETURN_SUCCESS.\r
+ If the serial device was successfully initialized, then return RETURN_SUCCESS.\r
+ If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.\r
+\r
+ @retval RETURN_SUCCESS The serial device was initialized.\r
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.\r
+\r
+**/\r
RETURN_STATUS\r
EFIAPI\r
SerialPortInitialize (\r
)\r
{\r
if (! XenHypercallIsAvailable ()) {\r
- return RETURN_NOT_FOUND;\r
+ return RETURN_DEVICE_ERROR;\r
}\r
\r
if (!mXenConsoleInterface) {\r
}\r
\r
/**\r
- Write data to serial device.\r
+ Write data from buffer to serial device.\r
\r
- @param Buffer Point of data buffer which need to be written.\r
- @param NumberOfBytes Number of output bytes which are cached in Buffer.\r
+ Writes NumberOfBytes data bytes from Buffer to the serial device.\r
+ The number of bytes actually written to the serial device is returned.\r
+ If the return value is less than NumberOfBytes, then the write operation failed.\r
+ If Buffer is NULL, then ASSERT().\r
+ If NumberOfBytes is zero, then return 0.\r
\r
- @retval 0 Write data failed.\r
- @retval !0 Actual number of bytes written to serial device.\r
+ @param Buffer Pointer to the data buffer to be written.\r
+ @param NumberOfBytes Number of bytes to written to the serial device.\r
+\r
+ @retval 0 NumberOfBytes is 0.\r
+ @retval >0 The number of bytes written to the serial device.\r
+ If this value is less than NumberOfBytes, then the write operation failed.\r
\r
**/\r
UINTN\r
XENCONS_RING_IDX Consumer, Producer;\r
UINTN Sent;\r
\r
+ ASSERT (Buffer != NULL);\r
+\r
+ if (NumberOfBytes == 0) {\r
+ return 0;\r
+ }\r
+\r
if (!mXenConsoleInterface) {\r
return 0;\r
}\r
\r
- Consumer = mXenConsoleInterface->out_cons;\r
- Producer = mXenConsoleInterface->out_prod;\r
+ Sent = 0;\r
+ do {\r
+ Consumer = mXenConsoleInterface->out_cons;\r
+ Producer = mXenConsoleInterface->out_prod;\r
\r
- MemoryFence ();\r
+ MemoryFence ();\r
\r
- Sent = 0;\r
- while (Sent < NumberOfBytes && ((Producer - Consumer) < sizeof (mXenConsoleInterface->out)))\r
- mXenConsoleInterface->out[MASK_XENCONS_IDX(Producer++, mXenConsoleInterface->out)] = Buffer[Sent++];\r
+ while (Sent < NumberOfBytes && ((Producer - Consumer) < sizeof (mXenConsoleInterface->out)))\r
+ mXenConsoleInterface->out[MASK_XENCONS_IDX(Producer++, mXenConsoleInterface->out)] = Buffer[Sent++];\r
\r
- MemoryFence ();\r
+ MemoryFence ();\r
\r
- mXenConsoleInterface->out_prod = Producer;\r
+ mXenConsoleInterface->out_prod = Producer;\r
\r
- if (Sent > 0) {\r
XenHypercallEventChannelOp (EVTCHNOP_send, &mXenConsoleEventChain);\r
- }\r
+\r
+ } while (Sent < NumberOfBytes);\r
\r
return Sent;\r
}\r
\r
/**\r
- Read data from serial device and save the data in buffer.\r
+ Read data from serial device and save the datas in buffer.\r
+\r
+ Reads NumberOfBytes data bytes from a serial device into the buffer\r
+ specified by Buffer. The number of bytes actually read is returned.\r
+ If Buffer is NULL, then ASSERT().\r
+ If NumberOfBytes is zero, then return 0.\r
\r
- @param Buffer Point of data buffer which need to be written.\r
- @param NumberOfBytes Size of Buffer[].\r
+ @param Buffer Pointer to the data buffer to store the data read from the serial device.\r
+ @param NumberOfBytes Number of bytes which will be read.\r
\r
- @retval 0 Read data failed.\r
- @retval !0 Actual number of bytes read from serial device.\r
+ @retval 0 Read data failed, no data is to be read.\r
+ @retval >0 Actual number of bytes read from serial device.\r
\r
**/\r
UINTN\r
XENCONS_RING_IDX Consumer, Producer;\r
UINTN Received;\r
\r
+ ASSERT (Buffer != NULL);\r
+\r
+ if (NumberOfBytes == 0) {\r
+ return 0;\r
+ }\r
+\r
if (!mXenConsoleInterface) {\r
return 0;\r
}\r
}\r
\r
/**\r
- Check to see if any data is available to be read from the debug device.\r
+ Polls a serial device to see if there is any data waiting to be read.\r
\r
- @retval TRUE At least one byte of data is available to be read\r
- @retval FALSE No data is available to be read\r
+ @retval TRUE Data is waiting to be read from the serial device.\r
+ @retval FALSE There is no data waiting to be read from the serial device.\r
\r
**/\r
BOOLEAN\r
return mXenConsoleInterface &&\r
mXenConsoleInterface->in_cons != mXenConsoleInterface->in_prod;\r
}\r
+\r
+/**\r
+ Sets the control bits on a serial device.\r
+\r
+ @param Control Sets the bits of Control that are settable.\r
+\r
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.\r
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.\r
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortSetControl (\r
+ IN UINT32 Control\r
+ )\r
+{\r
+ return RETURN_UNSUPPORTED;\r
+}\r
+\r
+/**\r
+ Retrieve the status of the control bits on a serial device.\r
+\r
+ @param Control A pointer to return the current control signals from the serial device.\r
+\r
+ @retval RETURN_SUCCESS The control bits were read from the serial device.\r
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.\r
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortGetControl (\r
+ OUT UINT32 *Control\r
+ )\r
+{\r
+ if (!mXenConsoleInterface) {\r
+ return RETURN_UNSUPPORTED;\r
+ }\r
+\r
+ *Control = 0;\r
+ if (!SerialPortPoll ()) {\r
+ *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY;\r
+ }\r
+ return RETURN_SUCCESS;\r
+}\r
+\r
+/**\r
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,\r
+ data bits, and stop bits on a serial device.\r
+\r
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the\r
+ device's default interface speed.\r
+ On output, the value actually set.\r
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the\r
+ serial interface. A ReceiveFifoDepth value of 0 will use\r
+ the device's default FIFO depth.\r
+ On output, the value actually set.\r
+ @param Timeout The requested time out for a single character in microseconds.\r
+ This timeout applies to both the transmit and receive side of the\r
+ interface. A Timeout value of 0 will use the device's default time\r
+ out value.\r
+ On output, the value actually set.\r
+ @param Parity The type of parity to use on this serial device. A Parity value of\r
+ DefaultParity will use the device's default parity value.\r
+ On output, the value actually set.\r
+ @param DataBits The number of data bits to use on the serial device. A DataBits\r
+ vaule of 0 will use the device's default data bit setting.\r
+ On output, the value actually set.\r
+ @param StopBits The number of stop bits to use on this serial device. A StopBits\r
+ value of DefaultStopBits will use the device's default number of\r
+ stop bits.\r
+ On output, the value actually set.\r
+\r
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.\r
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.\r
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.\r
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortSetAttributes (\r
+ IN OUT UINT64 *BaudRate,\r
+ IN OUT UINT32 *ReceiveFifoDepth,\r
+ IN OUT UINT32 *Timeout,\r
+ IN OUT EFI_PARITY_TYPE *Parity,\r
+ IN OUT UINT8 *DataBits,\r
+ IN OUT EFI_STOP_BITS_TYPE *StopBits\r
+ )\r
+{\r
+ return RETURN_UNSUPPORTED;\r
+}\r
+\r
projects / mirror_edk2.git / blobdiff