[mirror_qemu.git] / hw / arm / aspeed.c

/*
 * OpenPOWER Palmetto BMC
 *
 * Andrew Jeffery <andrew@aj.id.au>
 *
 * Copyright 2016 IBM Corp.
 *
 * This code is licensed under the GPL version 2 or later.  See
 * the COPYING file in the top-level directory.
 */

#include "qemu/osdep.h"
#include "qapi/error.h"
#include "cpu.h"
#include "exec/address-spaces.h"
#include "hw/arm/boot.h"
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/boards.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/misc/pca9552.h"
#include "hw/misc/tmp105.h"
#include "qemu/log.h"
#include "sysemu/block-backend.h"
#include "sysemu/sysemu.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
#include "qemu/units.h"

static struct arm_boot_info aspeed_board_binfo = {
    .board_id = -1, /* device-tree-only board */
};

struct AspeedBoardState {
    AspeedSoCState soc;
    MemoryRegion ram;
    MemoryRegion max_ram;
};

/* Palmetto hardware value: 0x120CE416 */
#define PALMETTO_BMC_HW_STRAP1 (                                        \
        SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) |               \
        SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \
        SCU_AST2400_HW_STRAP_ACPI_DIS |                                 \
        SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) |       \
        SCU_HW_STRAP_VGA_CLASS_CODE |                                   \
        SCU_HW_STRAP_LPC_RESET_PIN |                                    \
        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) |                \
        SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
        SCU_HW_STRAP_SPI_WIDTH |                                        \
        SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
        SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))

/* AST2500 evb hardware value: 0xF100C2E6 */
#define AST2500_EVB_HW_STRAP1 ((                                        \
        AST2500_HW_STRAP1_DEFAULTS |                                    \
        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
        SCU_HW_STRAP_MAC1_RGMII |                                       \
        SCU_HW_STRAP_MAC0_RGMII) &                                      \
        ~SCU_HW_STRAP_2ND_BOOT_WDT)

/* Romulus hardware value: 0xF10AD206 */
#define ROMULUS_BMC_HW_STRAP1 (                                         \
        AST2500_HW_STRAP1_DEFAULTS |                                    \
        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
        SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))

/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1

/*
 * The max ram region is for firmwares that scan the address space
 * with load/store to guess how much RAM the SoC has.
 */
static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
{
    return 0;
}

static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
                           unsigned size)
{
    /* Discard writes */
}

static const MemoryRegionOps max_ram_ops = {
    .read = max_ram_read,
    .write = max_ram_write,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

#define FIRMWARE_ADDR 0x0

static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
                           Error **errp)
{
    BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
    uint8_t *storage;
    int64_t size;

    /* The block backend size should have already been 'validated' by
     * the creation of the m25p80 object.
     */
    size = blk_getlength(blk);
    if (size <= 0) {
        error_setg(errp, "failed to get flash size");
        return;
    }

    if (rom_size > size) {
        rom_size = size;
    }

    storage = g_new0(uint8_t, rom_size);
    if (blk_pread(blk, 0, storage, rom_size) < 0) {
        error_setg(errp, "failed to read the initial flash content");
        return;
    }

    rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
    g_free(storage);
}

static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
                                      Error **errp)
{
    int i ;

    for (i = 0; i < s->num_cs; ++i) {
        AspeedSMCFlash *fl = &s->flashes[i];
        DriveInfo *dinfo = drive_get_next(IF_MTD);
        qemu_irq cs_line;

        fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
        if (dinfo) {
            qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
                                errp);
        }
        qdev_init_nofail(fl->flash);

        cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
        sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
    }
}

static void aspeed_board_init(MachineState *machine,
                              const AspeedBoardConfig *cfg)
{
    AspeedBoardState *bmc;
    AspeedSoCClass *sc;
    DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
    ram_addr_t max_ram_size;

    bmc = g_new0(AspeedBoardState, 1);
    object_initialize_child(OBJECT(machine), "soc", &bmc->soc,
                            (sizeof(bmc->soc)), cfg->soc_name, &error_abort,
                            NULL);

    sc = ASPEED_SOC_GET_CLASS(&bmc->soc);

    object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size",
                             &error_abort);
    object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
                            &error_abort);
    object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
                            &error_abort);
    object_property_set_int(OBJECT(&bmc->soc), smp_cpus, "num-cpus",
                            &error_abort);
    if (machine->kernel_filename) {
        /*
         * When booting with a -kernel command line there is no u-boot
         * that runs to unlock the SCU. In this case set the default to
         * be unlocked as the kernel expects
         */
        object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
                                "hw-prot-key", &error_abort);
    }
    object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
                             &error_abort);

    /*
     * Allocate RAM after the memory controller has checked the size
     * was valid. If not, a default value is used.
     */
    ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size",
                                        &error_abort);

    memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
    memory_region_add_subregion(get_system_memory(),
                                sc->info->memmap[ASPEED_SDRAM], &bmc->ram);
    object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
                                   &error_abort);

    max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
                                            &error_abort);
    memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
                          "max_ram", max_ram_size  - ram_size);
    memory_region_add_subregion(get_system_memory(),
                                sc->info->memmap[ASPEED_SDRAM] + ram_size,
                                &bmc->max_ram);

    aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
    aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);

    /* Install first FMC flash content as a boot rom. */
    if (drive0) {
        AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
        MemoryRegion *boot_rom = g_new(MemoryRegion, 1);

        /*
         * create a ROM region using the default mapping window size of
         * the flash module. The window size is 64MB for the AST2400
         * SoC and 128MB for the AST2500 SoC, which is twice as big as
         * needed by the flash modules of the Aspeed machines.
         */
        memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
                               fl->size, &error_abort);
        memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
                                    boot_rom);
        write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
    }

    aspeed_board_binfo.kernel_filename = machine->kernel_filename;
    aspeed_board_binfo.initrd_filename = machine->initrd_filename;
    aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
    aspeed_board_binfo.ram_size = ram_size;
    aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
    aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;

    if (cfg->i2c_init) {
        cfg->i2c_init(bmc);
    }

    arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
}

static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
{
    AspeedSoCState *soc = &bmc->soc;
    DeviceState *dev;
    uint8_t *eeprom_buf = g_malloc0(32 * 1024);

    /* The palmetto platform expects a ds3231 RTC but a ds1338 is
     * enough to provide basic RTC features. Alarms will be missing */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);

    smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
                          eeprom_buf);

    /* add a TMP423 temperature sensor */
    dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
                           "tmp423", 0x4c);
    object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
    object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
    object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
    object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort);
}

static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
{
    AspeedSoCState *soc = &bmc->soc;
    uint8_t *eeprom_buf = g_malloc0(8 * 1024);

    smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
                          eeprom_buf);

    /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
                     TYPE_TMP105, 0x4d);

    /* The AST2500 EVB does not have an RTC. Let's pretend that one is
     * plugged on the I2C bus header */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
}

static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
{
    AspeedSoCState *soc = &bmc->soc;

    /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
     * good enough */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
}

static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
{
    AspeedSoCState *soc = &bmc->soc;
    uint8_t *eeprom_buf = g_malloc0(8 * 1024);

    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552,
                     0x60);

    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);

    /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
                     0x4a);

    /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
     * good enough */
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);

    smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
                          eeprom_buf);
    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552,
                     0x60);
}

static void aspeed_machine_init(MachineState *machine)
{
    AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);

    aspeed_board_init(machine, amc->board);
}

static void aspeed_machine_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
    const AspeedBoardConfig *board = data;

    mc->desc = board->desc;
    mc->init = aspeed_machine_init;
    mc->max_cpus = ASPEED_CPUS_NUM;
    mc->no_sdcard = 1;
    mc->no_floppy = 1;
    mc->no_cdrom = 1;
    mc->no_parallel = 1;
    if (board->ram) {
        mc->default_ram_size = board->ram;
    }
    amc->board = board;
}

static const TypeInfo aspeed_machine_type = {
    .name = TYPE_ASPEED_MACHINE,
    .parent = TYPE_MACHINE,
    .instance_size = sizeof(AspeedMachine),
    .class_size = sizeof(AspeedMachineClass),
    .abstract = true,
};

static const AspeedBoardConfig aspeed_boards[] = {
    {
        .name      = MACHINE_TYPE_NAME("palmetto-bmc"),
        .desc      = "OpenPOWER Palmetto BMC (ARM926EJ-S)",
        .soc_name  = "ast2400-a1",
        .hw_strap1 = PALMETTO_BMC_HW_STRAP1,
        .fmc_model = "n25q256a",
        .spi_model = "mx25l25635e",
        .num_cs    = 1,
        .i2c_init  = palmetto_bmc_i2c_init,
        .ram       = 256 * MiB,
    }, {
        .name      = MACHINE_TYPE_NAME("ast2500-evb"),
        .desc      = "Aspeed AST2500 EVB (ARM1176)",
        .soc_name  = "ast2500-a1",
        .hw_strap1 = AST2500_EVB_HW_STRAP1,
        .fmc_model = "w25q256",
        .spi_model = "mx25l25635e",
        .num_cs    = 1,
        .i2c_init  = ast2500_evb_i2c_init,
        .ram       = 512 * MiB,
    }, {
        .name      = MACHINE_TYPE_NAME("romulus-bmc"),
        .desc      = "OpenPOWER Romulus BMC (ARM1176)",
        .soc_name  = "ast2500-a1",
        .hw_strap1 = ROMULUS_BMC_HW_STRAP1,
        .fmc_model = "n25q256a",
        .spi_model = "mx66l1g45g",
        .num_cs    = 2,
        .i2c_init  = romulus_bmc_i2c_init,
        .ram       = 512 * MiB,
    }, {
        .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
        .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
        .soc_name  = "ast2500-a1",
        .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
        .fmc_model = "mx25l25635e",
        .spi_model = "mx66l1g45g",
        .num_cs    = 2,
        .i2c_init  = witherspoon_bmc_i2c_init,
        .ram       = 512 * MiB,
    },
};

static void aspeed_machine_types(void)
{
    int i;

    type_register_static(&aspeed_machine_type);
    for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) {
        TypeInfo ti = {
            .name       = aspeed_boards[i].name,
            .parent     = TYPE_ASPEED_MACHINE,
            .class_init = aspeed_machine_class_init,
            .class_data = (void *)&aspeed_boards[i],
        };
        type_register(&ti);
    }
}

type_init(aspeed_machine_types)
Commit	Line	Data
327d8e4e AJ	1	/*
	2	* OpenPOWER Palmetto BMC
	3	*
	4	* Andrew Jeffery <andrew@aj.id.au>
	5	*
	6	* Copyright 2016 IBM Corp.
	7	*
	8	* This code is licensed under the GPL version 2 or later. See
	9	* the COPYING file in the top-level directory.
	10	*/
	11
	12	#include "qemu/osdep.h"
da34e65c	13	#include "qapi/error.h"
4771d756	14	#include "cpu.h"
327d8e4e	15	#include "exec/address-spaces.h"
12ec8bd5	16	#include "hw/arm/boot.h"
fca9ca1b	17	#include "hw/arm/aspeed.h"
00442402	18	#include "hw/arm/aspeed_soc.h"
327d8e4e	19	#include "hw/boards.h"
93198b6c	20	#include "hw/i2c/smbus_eeprom.h"
044475f3 PMD	21	#include "hw/misc/pca9552.h"
044475f3 PMD	22	#include "hw/misc/tmp105.h"
03dd024f	23	#include "qemu/log.h"
e1ad9bc4	24	#include "sysemu/block-backend.h"
ece09bee	25	#include "sysemu/sysemu.h"
d769a1da CLG	26	#include "hw/loader.h"
d769a1da CLG	27	#include "qemu/error-report.h"
a9df9622	28	#include "qemu/units.h"
327d8e4e	29
74fb1f38	30	static struct arm_boot_info aspeed_board_binfo = {
b033271f	31	.board_id = -1, /* device-tree-only board */
327d8e4e AJ	32	};
327d8e4e AJ	33
ea066d39	34	struct AspeedBoardState {
ff90606f	35	AspeedSoCState soc;
327d8e4e	36	MemoryRegion ram;
ebe31c0a	37	MemoryRegion max_ram;
ea066d39	38	};
327d8e4e	39
ef17f836	40	/* Palmetto hardware value: 0x120CE416 */
8da33ef7 CLG	41	#define PALMETTO_BMC_HW_STRAP1 ( \
	42	SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) \| \
	43	SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) \| \
	44	SCU_AST2400_HW_STRAP_ACPI_DIS \| \
	45	SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) \| \
	46	SCU_HW_STRAP_VGA_CLASS_CODE \| \
	47	SCU_HW_STRAP_LPC_RESET_PIN \| \
	48	SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) \| \
	49	SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) \| \
	50	SCU_HW_STRAP_SPI_WIDTH \| \
	51	SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) \| \
	52	SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
	53
ef17f836	54	/* AST2500 evb hardware value: 0xF100C2E6 */
9a7c1750 CLG	55	#define AST2500_EVB_HW_STRAP1 (( \
	56	AST2500_HW_STRAP1_DEFAULTS \| \
	57	SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE \| \
	58	SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE \| \
	59	SCU_AST2500_HW_STRAP_UART_DEBUG \| \
	60	SCU_AST2500_HW_STRAP_DDR4_ENABLE \| \
	61	SCU_HW_STRAP_MAC1_RGMII \| \
	62	SCU_HW_STRAP_MAC0_RGMII) & \
	63	~SCU_HW_STRAP_2ND_BOOT_WDT)
	64
ef17f836 CLG	65	/* Romulus hardware value: 0xF10AD206 */
	66	#define ROMULUS_BMC_HW_STRAP1 ( \
	67	AST2500_HW_STRAP1_DEFAULTS \| \
	68	SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE \| \
	69	SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE \| \
	70	SCU_AST2500_HW_STRAP_UART_DEBUG \| \
	71	SCU_AST2500_HW_STRAP_DDR4_ENABLE \| \
	72	SCU_AST2500_HW_STRAP_ACPI_ENABLE \| \
	73	SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
	74
62c2c2eb CLG	75	/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
	76	#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
	77
ebe31c0a CLG	78	/*
	79	* The max ram region is for firmwares that scan the address space
	80	* with load/store to guess how much RAM the SoC has.
	81	*/
	82	static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
	83	{
	84	return 0;
	85	}
	86
	87	static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
	88	unsigned size)
	89	{
	90	/* Discard writes */
	91	}
	92
	93	static const MemoryRegionOps max_ram_ops = {
	94	.read = max_ram_read,
	95	.write = max_ram_write,
	96	.endianness = DEVICE_NATIVE_ENDIAN,
	97	};
	98
d769a1da CLG	99	#define FIRMWARE_ADDR 0x0
	100
	101	static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
	102	Error **errp)
	103	{
	104	BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
	105	uint8_t *storage;
0c7209be CLG	106	int64_t size;
	107
	108	/* The block backend size should have already been 'validated' by
	109	* the creation of the m25p80 object.
	110	*/
	111	size = blk_getlength(blk);
	112	if (size <= 0) {
	113	error_setg(errp, "failed to get flash size");
	114	return;
	115	}
d769a1da	116
0c7209be CLG	117	if (rom_size > size) {
0c7209be CLG	118	rom_size = size;
d769a1da CLG	119	}
	120
	121	storage = g_new0(uint8_t, rom_size);
	122	if (blk_pread(blk, 0, storage, rom_size) < 0) {
	123	error_setg(errp, "failed to read the initial flash content");
	124	return;
	125	}
	126
	127	rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
	128	g_free(storage);
	129	}
	130
74fb1f38	131	static void aspeed_board_init_flashes(AspeedSMCState s, const char flashtype,
e1ad9bc4 CLG	132	Error **errp)
	133	{
	134	int i ;
	135
	136	for (i = 0; i < s->num_cs; ++i) {
	137	AspeedSMCFlash *fl = &s->flashes[i];
	138	DriveInfo *dinfo = drive_get_next(IF_MTD);
	139	qemu_irq cs_line;
	140
e1ad9bc4 CLG	141	fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
	142	if (dinfo) {
	143	qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
	144	errp);
	145	}
	146	qdev_init_nofail(fl->flash);
	147
	148	cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
	149	sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
	150	}
	151	}
	152
c3ba99f7 CLG	153	static void aspeed_board_init(MachineState *machine,
c3ba99f7 CLG	154	const AspeedBoardConfig *cfg)
327d8e4e	155	{
74fb1f38	156	AspeedBoardState *bmc;
b033271f	157	AspeedSoCClass *sc;
d769a1da	158	DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
ebe31c0a	159	ram_addr_t max_ram_size;
327d8e4e	160
74fb1f38	161	bmc = g_new0(AspeedBoardState, 1);
1b0ad567 PMD	162	object_initialize_child(OBJECT(machine), "soc", &bmc->soc,
	163	(sizeof(bmc->soc)), cfg->soc_name, &error_abort,
	164	NULL);
327d8e4e	165
b033271f CLG	166	sc = ASPEED_SOC_GET_CLASS(&bmc->soc);
b033271f CLG	167
19e9cdf0 MAL	168	object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size",
19e9cdf0 MAL	169	&error_abort);
c3ba99f7	170	object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
87e79af0	171	&error_abort);
26d5df95 CLG	172	object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
26d5df95 CLG	173	&error_abort);
ece09bee CLG	174	object_property_set_int(OBJECT(&bmc->soc), smp_cpus, "num-cpus",
ece09bee CLG	175	&error_abort);
b6e70d1d JS	176	if (machine->kernel_filename) {
	177	/*
	178	* When booting with a -kernel command line there is no u-boot
	179	* that runs to unlock the SCU. In this case set the default to
	180	* be unlocked as the kernel expects
	181	*/
	182	object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
	183	"hw-prot-key", &error_abort);
	184	}
327d8e4e AJ	185	object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
	186	&error_abort);
	187
de46f5f4 CLG	188	/*
	189	* Allocate RAM after the memory controller has checked the size
	190	* was valid. If not, a default value is used.
	191	*/
19e9cdf0 MAL	192	ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size",
19e9cdf0 MAL	193	&error_abort);
de46f5f4 CLG	194
de46f5f4 CLG	195	memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
d783d1fe CLG	196	memory_region_add_subregion(get_system_memory(),
d783d1fe CLG	197	sc->info->memmap[ASPEED_SDRAM], &bmc->ram);
de46f5f4 CLG	198	object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
	199	&error_abort);
	200
ebe31c0a CLG	201	max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
	202	&error_abort);
	203	memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
	204	"max_ram", max_ram_size - ram_size);
	205	memory_region_add_subregion(get_system_memory(),
d783d1fe	206	sc->info->memmap[ASPEED_SDRAM] + ram_size,
ebe31c0a CLG	207	&bmc->max_ram);
ebe31c0a CLG	208
6a0e947b CLG	209	aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
6a0e947b CLG	210	aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);
74fb1f38	211
d769a1da CLG	212	/* Install first FMC flash content as a boot rom. */
	213	if (drive0) {
	214	AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
	215	MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
	216
	217	/*
	218	* create a ROM region using the default mapping window size of
93bf276d CLG	219	* the flash module. The window size is 64MB for the AST2400
	220	* SoC and 128MB for the AST2500 SoC, which is twice as big as
	221	* needed by the flash modules of the Aspeed machines.
d769a1da	222	*/
44cf837d	223	memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
d769a1da CLG	224	fl->size, &error_abort);
	225	memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
	226	boot_rom);
	227	write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
	228	}
	229
74fb1f38 CLG	230	aspeed_board_binfo.kernel_filename = machine->kernel_filename;
	231	aspeed_board_binfo.initrd_filename = machine->initrd_filename;
	232	aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
	233	aspeed_board_binfo.ram_size = ram_size;
d783d1fe	234	aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
ece09bee	235	aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;
e1ad9bc4	236
2cf6cb50 CLG	237	if (cfg->i2c_init) {
	238	cfg->i2c_init(bmc);
	239	}
	240
74fb1f38 CLG	241	arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
74fb1f38 CLG	242	}
b033271f	243
2cf6cb50 CLG	244	static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
	245	{
	246	AspeedSoCState *soc = &bmc->soc;
a87e81b9	247	DeviceState *dev;
3d165f12	248	uint8_t eeprom_buf = g_malloc0(32 1024);
2cf6cb50 CLG	249
	250	/* The palmetto platform expects a ds3231 RTC but a ds1338 is
	251	* enough to provide basic RTC features. Alarms will be missing */
	252	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);
a87e81b9	253
3d165f12 CLG	254	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
	255	eeprom_buf);
	256
a87e81b9 CLG	257	/* add a TMP423 temperature sensor */
	258	dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
	259	"tmp423", 0x4c);
	260	object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
	261	object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
	262	object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
	263	object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort);
2cf6cb50 CLG	264	}
2cf6cb50 CLG	265
2cf6cb50 CLG	266	static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
	267	{
	268	AspeedSoCState *soc = &bmc->soc;
3d165f12 CLG	269	uint8_t eeprom_buf = g_malloc0(8 1024);
	270
	271	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
	272	eeprom_buf);
2cf6cb50 CLG	273
2cf6cb50 CLG	274	/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
044475f3 PMD	275	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
044475f3 PMD	276	TYPE_TMP105, 0x4d);
6c4567c7 CLG	277
	278	/* The AST2500 EVB does not have an RTC. Let's pretend that one is
	279	* plugged on the I2C bus header */
	280	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
2cf6cb50 CLG	281	}
2cf6cb50 CLG	282
6c4567c7 CLG	283	static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
	284	{
	285	AspeedSoCState *soc = &bmc->soc;
	286
	287	/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
	288	* good enough */
	289	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
	290	}
	291
62c2c2eb CLG	292	static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
	293	{
	294	AspeedSoCState *soc = &bmc->soc;
3d165f12	295	uint8_t eeprom_buf = g_malloc0(8 1024);
62c2c2eb	296
044475f3 PMD	297	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552,
044475f3 PMD	298	0x60);
8c9a61d7	299
62c2c2eb CLG	300	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
	301	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
	302
	303	/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
044475f3 PMD	304	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
044475f3 PMD	305	0x4a);
6c4567c7 CLG	306
	307	/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
	308	* good enough */
	309	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
3d165f12 CLG	310
	311	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
	312	eeprom_buf);
044475f3	313	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552,
8c9a61d7	314	0x60);
62c2c2eb CLG	315	}
62c2c2eb CLG	316
fca9ca1b	317	static void aspeed_machine_init(MachineState *machine)
62c2c2eb	318	{
fca9ca1b CLG	319	AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
	320
	321	aspeed_board_init(machine, amc->board);
62c2c2eb CLG	322	}
62c2c2eb CLG	323
fca9ca1b	324	static void aspeed_machine_class_init(ObjectClass oc, void data)
62c2c2eb CLG	325	{
62c2c2eb CLG	326	MachineClass *mc = MACHINE_CLASS(oc);
fca9ca1b CLG	327	AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
fca9ca1b CLG	328	const AspeedBoardConfig *board = data;
62c2c2eb	329
fca9ca1b CLG	330	mc->desc = board->desc;
fca9ca1b CLG	331	mc->init = aspeed_machine_init;
ece09bee	332	mc->max_cpus = ASPEED_CPUS_NUM;
62c2c2eb CLG	333	mc->no_sdcard = 1;
	334	mc->no_floppy = 1;
	335	mc->no_cdrom = 1;
	336	mc->no_parallel = 1;
a9df9622 JS	337	if (board->ram) {
	338	mc->default_ram_size = board->ram;
	339	}
fca9ca1b	340	amc->board = board;
62c2c2eb CLG	341	}
62c2c2eb CLG	342
fca9ca1b CLG	343	static const TypeInfo aspeed_machine_type = {
fca9ca1b CLG	344	.name = TYPE_ASPEED_MACHINE,
62c2c2eb	345	.parent = TYPE_MACHINE,
fca9ca1b CLG	346	.instance_size = sizeof(AspeedMachine),
	347	.class_size = sizeof(AspeedMachineClass),
	348	.abstract = true,
	349	};
	350
	351	static const AspeedBoardConfig aspeed_boards[] = {
	352	{
	353	.name = MACHINE_TYPE_NAME("palmetto-bmc"),
	354	.desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)",
	355	.soc_name = "ast2400-a1",
	356	.hw_strap1 = PALMETTO_BMC_HW_STRAP1,
	357	.fmc_model = "n25q256a",
	358	.spi_model = "mx25l25635e",
	359	.num_cs = 1,
	360	.i2c_init = palmetto_bmc_i2c_init,
a9df9622	361	.ram = 256 * MiB,
fca9ca1b CLG	362	}, {
	363	.name = MACHINE_TYPE_NAME("ast2500-evb"),
	364	.desc = "Aspeed AST2500 EVB (ARM1176)",
	365	.soc_name = "ast2500-a1",
	366	.hw_strap1 = AST2500_EVB_HW_STRAP1,
	367	.fmc_model = "w25q256",
	368	.spi_model = "mx25l25635e",
	369	.num_cs = 1,
	370	.i2c_init = ast2500_evb_i2c_init,
a9df9622	371	.ram = 512 * MiB,
fca9ca1b CLG	372	}, {
	373	.name = MACHINE_TYPE_NAME("romulus-bmc"),
	374	.desc = "OpenPOWER Romulus BMC (ARM1176)",
	375	.soc_name = "ast2500-a1",
	376	.hw_strap1 = ROMULUS_BMC_HW_STRAP1,
	377	.fmc_model = "n25q256a",
	378	.spi_model = "mx66l1g45g",
	379	.num_cs = 2,
	380	.i2c_init = romulus_bmc_i2c_init,
a9df9622	381	.ram = 512 * MiB,
fca9ca1b CLG	382	}, {
	383	.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
	384	.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
	385	.soc_name = "ast2500-a1",
	386	.hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
	387	.fmc_model = "mx25l25635e",
	388	.spi_model = "mx66l1g45g",
	389	.num_cs = 2,
	390	.i2c_init = witherspoon_bmc_i2c_init,
a9df9622	391	.ram = 512 * MiB,
fca9ca1b	392	},
62c2c2eb CLG	393	};
62c2c2eb CLG	394
fca9ca1b	395	static void aspeed_machine_types(void)
74fb1f38	396	{
fca9ca1b CLG	397	int i;
	398
	399	type_register_static(&aspeed_machine_type);
	400	for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) {
	401	TypeInfo ti = {
	402	.name = aspeed_boards[i].name,
	403	.parent = TYPE_ASPEED_MACHINE,
	404	.class_init = aspeed_machine_class_init,
	405	.class_data = (void *)&aspeed_boards[i],
	406	};
	407	type_register(&ti);
	408	}
74fb1f38 CLG	409	}
74fb1f38 CLG	410
fca9ca1b	411	type_init(aspeed_machine_types)