]>
git.proxmox.com Git - mirror_smartmontools-debian.git/blob - os_os2/hdreg.h
5 * This file contains some defines for the AT-hd-controller.
9 #define HD_IRQ 14 /* the standard disk interrupt */
11 /* ide.c has its own port definitions in "ide.h" */
13 /* Hd controller regs. Ref: IBM AT Bios-listing */
14 #define HD_DATA 0x1f0 /* _CTL when writing */
15 #define HD_ERROR 0x1f1 /* see err-bits */
16 #define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */
17 #define HD_SECTOR 0x1f3 /* starting sector */
18 #define HD_LCYL 0x1f4 /* starting cylinder */
19 #define HD_HCYL 0x1f5 /* high byte of starting cyl */
20 #define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */
21 #define HD_STATUS 0x1f7 /* see status-bits */
22 #define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
23 #define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
24 #define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
26 #define HD_CMD 0x3f6 /* used for resets */
27 #define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
29 /* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
31 /* Bits of HD_STATUS */
33 #define INDEX_STAT 0x02
34 #define ECC_STAT 0x04 /* Corrected error */
36 #define SEEK_STAT 0x10
37 #define WRERR_STAT 0x20
38 #define READY_STAT 0x40
39 #define BUSY_STAT 0x80
41 /* Values for HD_COMMAND */
42 #define WIN_RESTORE 0x10
44 #define WIN_WRITE 0x30
45 #define WIN_WRITE_VERIFY 0x3C
46 #define WIN_VERIFY 0x40
47 #define WIN_FORMAT 0x50
50 #define WIN_DIAGNOSE 0x90
51 #define WIN_SPECIFY 0x91 /* set drive geometry translation */
52 #define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
53 #define WIN_SETIDLE1 0xE3
54 #define WIN_SETIDLE2 0x97
56 #define WIN_STANDBYNOW1 0xE0
57 #define WIN_STANDBYNOW2 0x94
58 #define WIN_SLEEPNOW1 0xE6
59 #define WIN_SLEEPNOW2 0x99
60 #define WIN_CHECKPOWERMODE1 0xE5
61 #define WIN_CHECKPOWERMODE2 0x98
63 #define WIN_DOORLOCK 0xDE /* lock door on removable drives */
64 #define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
66 #define WIN_MULTREAD 0xC4 /* read sectors using multiple mode */
67 #define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
68 #define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
69 #define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
70 #define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
71 #define WIN_SETFEATURES 0xEF /* set special drive features */
72 #define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
73 #define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
75 #define WIN_QUEUED_SERVICE 0xA2 /* */
76 #define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
77 #define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
79 #define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
80 #define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
82 #define WIN_SMART 0xB0 /* self-monitoring and reporting */
84 /* Additional drive command codes used by ATAPI devices. */
85 #define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
86 #define WIN_SRST 0x08 /* ATAPI soft reset command */
87 #define WIN_PACKETCMD 0xA0 /* Send a packet command. */
89 #define DISABLE_SEAGATE 0xFB
90 #define EXABYTE_ENABLE_NEST 0xF0
92 /* WIN_SMART sub-commands */
94 #define SMART_READ_VALUES 0xd0
95 #define SMART_READ_THRESHOLDS 0xd1
96 #define SMART_AUTOSAVE 0xd2
97 #define SMART_SAVE 0xd3
98 #define SMART_IMMEDIATE_OFFLINE 0xd4
99 #define SMART_READ_LOG_SECTOR 0xd5
100 #define SMART_WRITE_LOG_SECTOR 0xd6
101 #define SMART_ENABLE 0xd8
102 #define SMART_DISABLE 0xd9
103 #define SMART_STATUS 0xda
104 #define SMART_AUTO_OFFLINE 0xdb
106 /* WIN_SETFEATURES sub-commands */
108 #define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */
109 #define SETFEATURES_XFER 0x03 /* Set transfer mode */
110 # define XFER_UDMA_7 0x47 /* 0100|0111 */
111 # define XFER_UDMA_6 0x46 /* 0100|0110 */
112 # define XFER_UDMA_5 0x45 /* 0100|0101 */
113 # define XFER_UDMA_4 0x44 /* 0100|0100 */
114 # define XFER_UDMA_3 0x43 /* 0100|0011 */
115 # define XFER_UDMA_2 0x42 /* 0100|0010 */
116 # define XFER_UDMA_1 0x41 /* 0100|0001 */
117 # define XFER_UDMA_0 0x40 /* 0100|0000 */
118 # define XFER_MW_DMA_2 0x22 /* 0010|0010 */
119 # define XFER_MW_DMA_1 0x21 /* 0010|0001 */
120 # define XFER_MW_DMA_0 0x20 /* 0010|0000 */
121 # define XFER_SW_DMA_2 0x12 /* 0001|0010 */
122 # define XFER_SW_DMA_1 0x11 /* 0001|0001 */
123 # define XFER_SW_DMA_0 0x10 /* 0001|0000 */
124 # define XFER_PIO_4 0x0C /* 0000|1100 */
125 # define XFER_PIO_3 0x0B /* 0000|1011 */
126 # define XFER_PIO_2 0x0A /* 0000|1010 */
127 # define XFER_PIO_1 0x09 /* 0000|1001 */
128 # define XFER_PIO_0 0x08 /* 0000|1000 */
129 # define XFER_PIO_SLOW 0x00 /* 0000|0000 */
130 #define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */
131 #define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */
132 #define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */
133 #define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */
134 #define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */
135 #define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */
136 #define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */
137 #define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */
138 #define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */
139 #define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */
140 #define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */
141 #define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
142 #define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
143 #define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
144 #define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt */
145 #define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt */
147 /* WIN_SECURITY sub-commands */
149 #define SECURITY_SET_PASSWORD 0xBA /* 0xF1 */
150 #define SECURITY_UNLOCK 0xBB /* 0xF2 */
151 #define SECURITY_ERASE_PREPARE 0xBC /* 0xF3 */
152 #define SECURITY_ERASE_UNIT 0xBD /* 0xF4 */
153 #define SECURITY_FREEZE_LOCK 0xBE /* 0xF5 */
154 #define SECURITY_DISABLE_PASSWORD 0xBF /* 0xF6 */
156 /* Bits for HD_ERROR */
157 #define MARK_ERR 0x01 /* Bad address mark */
158 #define TRK0_ERR 0x02 /* couldn't find track 0 */
159 #define ABRT_ERR 0x04 /* Command aborted */
160 #define MCR_ERR 0x08 /* media change request */
161 #define ID_ERR 0x10 /* ID field not found */
162 #define ECC_ERR 0x40 /* Uncorrectable ECC error */
163 #define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
164 #define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
168 unsigned char sectors
;
169 unsigned short cylinders
;
173 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
174 #define HDIO_GETGEO 0x0301 /* get device geometry */
175 #define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
176 #define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
177 #define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */
178 #define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
179 #define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
180 #define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
181 #define HDIO_GET_DMA 0x030b /* get use-dma flag */
182 #define HDIO_GET_NICE 0x030c /* get nice flags */
183 #define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
185 #define HDIO_DRIVE_RESET 0x031c /* execute a device reset */
186 #define HDIO_TRISTATE_HWIF 0x031d /* execute a channel tristate */
188 #define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */
190 #define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
192 #define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
194 /* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
195 #define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
196 #define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
197 #define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
198 #define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
199 #define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
200 #define HDIO_SET_DMA 0x0326 /* change use-dma flag */
201 #define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
202 #define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
203 #define HDIO_SET_NICE 0x0329 /* set nice flags */
204 #define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
207 struct hd_big_geometry
{
209 unsigned char sectors
;
210 unsigned int cylinders
;
214 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
215 #define HDIO_GETGEO_BIG 0x0330 /* */
216 #define HDIO_GETGEO_BIG_RAW 0x0331 /* */
218 #define __NEW_HD_DRIVE_ID
219 /* structure returned by HDIO_GET_IDENTITY, as per ANSI ATA2 rev.2f spec */
221 unsigned short config
; /* lots of obsolete bit flags */
222 unsigned short cyls
; /* "physical" cyls */
223 unsigned short reserved2
; /* reserved (word 2) */
224 unsigned short heads
; /* "physical" heads */
225 unsigned short track_bytes
; /* unformatted bytes per track */
226 unsigned short sector_bytes
; /* unformatted bytes per sector */
227 unsigned short sectors
; /* "physical" sectors per track */
228 unsigned short vendor0
; /* vendor unique */
229 unsigned short vendor1
; /* vendor unique */
230 unsigned short vendor2
; /* vendor unique */
231 unsigned char serial_no
[20]; /* 0 = not_specified */
232 unsigned short buf_type
;
233 unsigned short buf_size
; /* 512 byte increments; 0 = not_specified */
234 unsigned short ecc_bytes
; /* for r/w long cmds; 0 = not_specified */
235 unsigned char fw_rev
[8]; /* 0 = not_specified */
236 unsigned char model
[40]; /* 0 = not_specified */
237 unsigned char max_multsect
; /* 0=not_implemented */
238 unsigned char vendor3
; /* vendor unique */
239 unsigned short dword_io
; /* 0=not_implemented; 1=implemented */
240 unsigned char vendor4
; /* vendor unique */
241 unsigned char capability
; /* bits 0:DMA 1:LBA 2:IORDYsw 3:IORDYsup*/
242 unsigned short reserved50
; /* reserved (word 50) */
243 unsigned char vendor5
; /* vendor unique */
244 unsigned char tPIO
; /* 0=slow, 1=medium, 2=fast */
245 unsigned char vendor6
; /* vendor unique */
246 unsigned char tDMA
; /* 0=slow, 1=medium, 2=fast */
247 unsigned short field_valid
; /* bits 0:cur_ok 1:eide_ok */
248 unsigned short cur_cyls
; /* logical cylinders */
249 unsigned short cur_heads
; /* logical heads */
250 unsigned short cur_sectors
; /* logical sectors per track */
251 unsigned short cur_capacity0
; /* logical total sectors on drive */
252 unsigned short cur_capacity1
; /* (2 words, misaligned int) */
253 unsigned char multsect
; /* current multiple sector count */
254 unsigned char multsect_valid
; /* when (bit0==1) multsect is ok */
255 unsigned int lba_capacity
; /* total number of sectors */
256 unsigned short dma_1word
; /* single-word dma info */
257 unsigned short dma_mword
; /* multiple-word dma info */
258 unsigned short eide_pio_modes
; /* bits 0:mode3 1:mode4 */
259 unsigned short eide_dma_min
; /* min mword dma cycle time (ns) */
260 unsigned short eide_dma_time
; /* recommended mword dma cycle time (ns) */
261 unsigned short eide_pio
; /* min cycle time (ns), no IORDY */
262 unsigned short eide_pio_iordy
; /* min cycle time (ns), with IORDY */
263 unsigned short words69_70
[2]; /* reserved words 69-70 */
264 /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
265 unsigned short words71_74
[4]; /* reserved words 71-74 */
266 unsigned short queue_depth
; /* */
267 unsigned short words76_79
[4]; /* reserved words 76-79 */
268 unsigned short major_rev_num
; /* */
269 unsigned short minor_rev_num
; /* */
270 unsigned short command_set_1
; /* bits 0:Smart 1:Security 2:Removable 3:PM */
271 unsigned short command_set_2
; /* bits 14:Smart Enabled 13:0 zero */
272 unsigned short cfsse
; /* command set-feature supported extensions */
273 unsigned short cfs_enable_1
; /* command set-feature enabled */
274 unsigned short cfs_enable_2
; /* command set-feature enabled */
275 unsigned short csf_default
; /* command set-feature default */
276 unsigned short dma_ultra
; /* */
277 unsigned short word89
; /* reserved (word 89) */
278 unsigned short word90
; /* reserved (word 90) */
279 unsigned short CurAPMvalues
; /* current APM values */
280 unsigned short word92
; /* reserved (word 92) */
281 unsigned short hw_config
; /* hardware config */
282 unsigned short words94_125
[32];/* reserved words 94-125 */
283 unsigned short last_lun
; /* reserved (word 126) */
284 unsigned short word127
; /* reserved (word 127) */
285 unsigned short dlf
; /* device lock function
287 * 8 security level 1:max 0:high
296 unsigned short csfo
; /* current set features options
303 unsigned short words130_155
[26];/* reserved vendor words 130-155 */
304 unsigned short word156
;
305 unsigned short words157_159
[3];/* reserved vendor words 157-159 */
306 unsigned short words160_255
[95];/* reserved words 160-255 */
310 * IDE "nice" flags. These are used on a per drive basis to determine
311 * when to be nice and give more bandwidth to the other devices which
312 * share the same IDE bus.
314 #define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
315 #define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
316 #define IDE_NICE_0 (2) /* when sure that it won't affect us */
317 #define IDE_NICE_1 (3) /* when probably won't affect us much */
318 #define IDE_NICE_2 (4) /* when we know it's on our expense */
322 * These routines are used for kernel command line parameters from main.c:
324 #include <linux/config.h>
326 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
327 int ide_register(int io_port
, int ctl_port
, int irq
);
328 void ide_unregister(unsigned int);
329 #endif /* CONFIG_BLK_DEV_IDE || CONFIG_BLK_DEV_IDE_MODULE */
331 #endif /* __KERNEL__ */
333 #endif /* _LINUX_HDREG_H */