smartd.initd.in

   1 #! /bin/sh
   2
   3 # smartmontools init file for smartd
   4 # Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net>
   5 # $Id: smartd.initd.in,v 1.38 2008/03/04 22:09:47 ballen4705 Exp $
   6
   7 # For RedHat and cousins:
   8 # chkconfig: 2345 40 40
   9 # description: Self Monitoring and Reporting Technology (SMART) Daemon
  10 # processname: smartd
  11
  12 # For SuSE and cousins
  13 ### BEGIN INIT INFO
  14 # Provides:                   smartd
  15 # Required-Start:             $syslog
  16 # X-UnitedLinux-Should-Start: $sendmail
  17 # Should-Start:               $sendmail
  18 # Required-Stop:              $syslog
  19 # X-UnitedLinux-Should-Stop:
  20 # Default-Start:              2 3 5
  21 # Default-Stop:
  22 # Short-Description:          Monitors disk and tape health via S.M.A.R.T.
  23 # Description:                Start S.M.A.R.T. disk and tape monitor.
  24 ### END INIT INFO
  25
  26 # This program is free software; you can redistribute it and/or modify it
  27 # under the terms of the GNU General Public License as published by the Free
  28 # Software Foundation; either version 2, or (at your option) any later
  29 # version.
  30 # You should have received a copy of the GNU General Public License (for
  31 # example COPYING); if not, write to the Free Software Foundation, Inc., 675
  32 # Mass Ave, Cambridge, MA 02139, USA.
  33 # This code was originally developed as a Senior Thesis by Michael Cornwell
  34 # at the Concurrent Systems Laboratory (now part of the Storage Systems
  35 # Research Center), Jack Baskin School of Engineering, University of
  36 # California, Santa Cruz. http://ssrc.soe.ucsc.edu/.
  37
  38 # Uncomment the line below to pass options to smartd on startup.
  39 # Note that distribution specific configuration files like
  40 # /etc/{default,sysconfig}/smartmontools might override these
  41 #smartd_opts="--interval=1800"
  42
  43 SMARTD_BIN=/usr/local/sbin/smartd
  44
  45 report_unsupported () {
  46     echo "Currently the smartmontools package has no init script for"
  47     echo "the $1 OS/distribution. If you can provide one or this"
  48     echo "one works after removing some ifdefs, please contact"
  49     echo "smartmontools-support@lists.sourceforge.net."
  50     exit 1
  51 }
  52
  53 # Red Hat or Yellow Dog or Mandrake
  54 if [ -f /etc/redhat-release -o -f /etc/yellowdog-release -o -f /etc/mandrake-release -o -f /etc/whitebox-release -o -f /etc/trustix-release -o -f /etc/tinysofa-release ] ; then
  55
  56 # Source function library
  57     . /etc/rc.d/init.d/functions
  58
  59 # Source configuration file.  This should define the shell variable smartd_opts
  60     [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools
  61
  62     RETVAL=0
  63
  64     prog=smartd
  65
  66     case "$1" in
  67         start)
  68             echo -n $"Starting $prog: "
  69             daemon $SMARTD_BIN $smartd_opts
  70             touch /var/lock/subsys/smartd
  71             echo
  72             ;;
  73         stop)
  74             echo -n $"Shutting down $prog: "
  75             killproc $SMARTD_BIN
  76             rm -f /var/lock/subsys/smartd
  77             echo
  78             ;;
  79         reload)
  80             echo -n $"Reloading $prog daemon configuration: "
  81             killproc $SMARTD_BIN -HUP
  82             RETVAL=$?
  83             echo
  84             ;;
  85         report)
  86             echo -n $"Checking SMART devices now: "
  87             killproc $SMARTD_BIN -USR1
  88             RETVAL=$?
  89             echo
  90             ;;
  91         restart)
  92             $0 stop
  93             $0 start
  94             ;;
  95         status)
  96             status $prog
  97             ;;
  98         *)
  99             echo $"Usage: $0 {start|stop|reload|report|restart|status}"
 100             RETVAL=1
 101     esac
 102
 103     exit $RETVAL
 104
 105 # Slackware
 106 elif [ -f /etc/slackware-version ] ; then
 107
 108 # Source configuration file.  This should define the shell variable smartd_opts.
 109 # Email smartmontools-support@lists.sourceforge.net if there is a better choice
 110 # of path for Slackware.
 111
 112     [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools
 113
 114     case "$1" in
 115         start)
 116             echo -n "Starting smartd: "
 117             $SMARTD_BIN $smartd_opts
 118             echo
 119             ;;
 120         stop)
 121             echo -n "Shutting down smartd: "
 122             killall $SMARTD_BIN
 123             echo
 124             ;;
 125         restart)
 126             $0 stop
 127             sleep 1
 128             $0 start
 129             ;;
 130         *)
 131             echo "Usage: smartd {start|stop|restart}"
 132             exit 1
 133     esac
 134
 135     exit 0
 136
 137 # SuSE
 138 elif [ -f /etc/SuSE-release ] ; then
 139     test -x $SMARTD_BIN || exit 5
 140
 141     # Existence of config file is optional
 142     SMARTD_CONFIG=/etc/smartd.conf
 143
 144 # source configuration file. This should set the shell variable smartd_opts
 145     [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools
 146
 147    # Shell functions sourced from /etc/rc.status:
 148    #      rc_check         check and set local and overall rc status
 149    #      rc_status        check and set local and overall rc status
 150    #      rc_status -v     ditto but be verbose in local rc status
 151    #      rc_status -v -r  ditto and clear the local rc status
 152    #      rc_failed        set local and overall rc status to failed
 153    #      rc_reset         clear local rc status (overall remains)
 154    #      rc_exit          exit appropriate to overall rc status
 155     . /etc/rc.status
 156
 157    # First reset status of this service
 158     rc_reset
 159
 160    # Return values acc. to LSB for all commands but status:
 161    # 0 - success
 162    # 1 - misc error
 163    # 2 - invalid or excess args
 164    # 3 - unimplemented feature (e.g. reload)
 165    # 4 - insufficient privilege
 166    # 5 - program not installed
 167    # 6 - program not configured
 168    #
 169    # Note that starting an already running service, stopping
 170    # or restarting a not-running service as well as the restart
 171    # with force-reload (in case signalling is not supported) are
 172    # considered a success.
 173     case "$1" in
 174         start)
 175             echo -n "Starting smartd "
 176             ## Start daemon with startproc(8). If this fails
 177             ## the echo return value is set appropriate.
 178
 179             # startproc should return 0, even if service is
 180             # already running to match LSB spec.
 181             startproc $SMARTD_BIN $smartd_opts
 182
 183             # Remember status and be verbose
 184             rc_status -v
 185             ;;
 186         stop)
 187             echo -n "Shutting down smartd "
 188             killproc -TERM $SMARTD_BIN
 189
 190             # Remember status and be verbose
 191             rc_status -v
 192             ;;
 193     try-restart|condrestart)
 194             ## Do a restart only if the service was active before.
 195             ## Note: try-restart is now part of LSB (as of 1.9).
 196             ## RH has a similar command named condrestart.
 197             if test "$1" = "condrestart"; then
 198                     echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
 199             fi
 200             $0 status
 201             if test $? = 0; then
 202                     $0 restart
 203             else
 204                     rc_reset    # Not running is not a failure.
 205             fi
 206             # Remember status and be quiet
 207             rc_status
 208             ;;
 209     restart | force-reload)
 210             $0 stop
 211             $0 start
 212             ;;
 213     reload)
 214         ## Like force-reload, but if daemon does not support
 215         ## signaling, do nothing (!)
 216             rc_failed 3
 217             rc_status -v
 218             ;;
 219     status)
 220             echo -n "Checking for service smartd "
 221             ## Check status with checkproc(8), if process is running
 222             ## checkproc will return with exit status 0.
 223
 224             # Status has a slightly different for the status command:
 225             # 0 - service running
 226             # 1 - service dead, but /var/run/  pid  file exists
 227             # 2 - service dead, but /var/lock/ lock file exists
 228             # 3 - service not running
 229
 230             # NOTE: checkproc returns LSB compliant status values.
 231             checkproc $SMARTD_BIN
 232             rc_status -v
 233             ;;
 234         probe)
 235             ## Optional: Probe for the necessity of a reload, print out the
 236             ## argument to this init script which is required for a reload.
 237             ## Note: probe is not (yet) part of LSB (as of 1.2)
 238
 239             test $SMARTD_CONFIG -nt /var/run/smartd.pid && echo reload
 240             ;;
 241         *)
 242             echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
 243             exit 1
 244             ;;
 245     esac
 246
 247     rc_exit
 248
 249 # Debian case
 250 elif [ -f /etc/debian_version ] ; then
 251         PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
 252         SMARTDPID=/var/run/smartd.pid
 253         [ -x $SMARTD_BIN ] || exit 0
 254         RET=0
 255
 256 # source configuration file
 257         [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools
 258
 259         smartd_opts="--pidfile $SMARTDPID $smartd_opts"
 260
 261         case "$1" in
 262         start)
 263                 echo -n "Starting S.M.A.R.T. daemon: smartd"
 264                 if start-stop-daemon --start --quiet --pidfile $SMARTDPID \
 265                 --exec $SMARTD_BIN -- $smartd_opts; then
 266                         echo "."
 267                 else
 268                         echo " (failed)"
 269                         RET=1
 270                 fi
 271         ;;
 272         stop)
 273                 echo -n "Stopping S.M.A.R.T. daemon: smartd"
 274                 start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID
 275                 echo "."
 276         ;;
 277         restart|force-reload)
 278                 $0 stop
 279                 $0 start
 280                 ;;
 281         *)
 282                 echo "Usage: /etc/init.d/smartmontools {start|stop|restart|force-reload}"
 283                 exit 1
 284         esac
 285         exit $RET
 286
 287 elif [ -f /etc/gentoo-release ] ; then
 288     report_unsupported "Gentoo"
 289
 290 elif [ -f /etc/turbolinux-release ] ; then
 291     report_unsupported "Turbolinux"
 292
 293 elif [ -f /etc/environment.corel ] ; then
 294     report_unsupported "Corel"
 295
 296 # PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif
 297
 298 elif uname -a | grep FreeBSD > /dev/null 2>&1 ; then
 299 # following is replaced by port install
 300     PREFIX=@@PREFIX@@
 301
 302 # Updated to try both the RCNG version of things from 5.x, or fallback to
 303 # oldfashioned rc.conf
 304
 305     if [ -r /etc/rc.subr ]; then
 306 # This is RC-NG, pick up our values
 307         . /etc/rc.subr
 308         name="smartd"
 309         rcvar="smartd_enable"
 310         command="$SMARTD_BIN"
 311         load_rc_config $name
 312     elif [ -r /etc/defaults/rc.conf ]; then
 313 # Not a 5.x system, try the default location for variables
 314         . /etc/defaults/rc.conf
 315         source_rc_confs
 316     elif [ -r /etc/rc.conf ]; then
 317 # Worst case, fallback to system config file
 318         . /etc/rc.conf
 319     fi
 320
 321     if [ -r /etc/rc.subr ]; then
 322 # Use new functionality from RC-NG
 323         run_rc_command "$1"
 324     else
 325         PID_FILE=/var/run/smartd.pid
 326         case "$1" in
 327             start)
 328                 $SMARTD_BIN -p $PID_FILE $smartd_flags
 329                 echo -n " smartd"
 330                 ;;
 331             stop)
 332                 kill `cat $PID_FILE`
 333                 echo -n " smartd"
 334                 ;;
 335             restart)
 336                 $0 stop
 337                 sleep 1
 338                 $0 start
 339                 ;;
 340             *)
 341                 echo "Usage: smartd {start|stop|restart}"
 342                 exit 1
 343         esac
 344
 345         exit 0
 346     fi
 347 elif uname -a | grep SunOS > /dev/null 2>&1 ; then
 348
 349 # Source configuration file.  This should define the shell variable smartd_opts.
 350 # Email smartmontools-support@lists.sourceforge.net if there is a better choice
 351 # of path for Solaris
 352
 353     [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools
 354
 355     PID_FILE=/var/run/smartd.pid
 356
 357     case "$1" in
 358         start)
 359             $SMARTD_BIN -p $PID_FILE $smartd_opts
 360             echo -n "smartd "
 361             ;;
 362         stop)
 363             [ -f $PID_FILE ] && kill `cat $PID_FILE`
 364             echo -n "smartd "
 365             ;;
 366         restart)
 367             $0 stop
 368             sleep 1
 369             $0 start
 370             ;;
 371         *)
 372             echo "Usage: smartd {start|stop|restart}"
 373             exit 1
 374     esac
 375
 376     exit 0
 377
 378 # Cygwin
 379 elif uname | grep -i CYGWIN > /dev/null 2>&1 ; then
 380
 381 # The following settings may be changed by the configuration file below
 382     # Service Name (must be unique)
 383     smartd_svcname=smartd
 384     # Service display name
 385     smartd_svcdisp="CYGWIN smartd"
 386     # Service description
 387     smartd_svcdesc="\
 388 Controls and monitors storage devices using the Self-Monitoring \
 389 Analysis and Reporting Technology System (S.M.A.R.T.) \
 390 built into ATA and SCSI Hard Drives. \
 391 http://smartmontools.sourceforge.net/"
 392
 393 # Source configuration file.  This should define the shell variable smartd_opts.
 394 # Email smartmontools-support@lists.sourceforge.net if there is a better choice
 395 # of path for Cygwin
 396
 397     [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools
 398
 399     PID_FILE=/var/run/smartd.pid
 400     RETVAL=0
 401
 402     # Note: "[ -r $PID_FILE ]" is not used here. On Cygwin, this command may
 403     # return success even if the file is present but cannot be read by current user.
 404     # If smartd is running as service, smartd.pid is owned by local system account
 405     # which is different from any user ever executing this script.
 406
 407     case "$1" in
 408         start)
 409             if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then
 410                 echo -n "Starting service $smartd_svcname: "
 411                 cygrunsrv -S "$smartd_svcname"
 412             else
 413                 echo -n "Starting smartd as daemon: "
 414                 $SMARTD_BIN -p $PID_FILE $smartd_opts
 415             fi
 416             RETVAL=$?
 417             ;;
 418         stop)
 419             echo -n "Shutting down smartd: "
 420             pid="`cat $PID_FILE 2>/dev/null`" && kill "$pid"
 421             RETVAL=$?
 422             ;;
 423         reload)
 424             echo -n "Reloading smartd configuration: "
 425             pid="`cat $PID_FILE 2>/dev/null`" && kill -HUP "$pid"
 426             RETVAL=$?
 427             ;;
 428         report)
 429             echo -n "Checking SMART devices now: "
 430             pid="`cat $PID_FILE 2>/dev/null`" && kill -USR1 "$pid"
 431             RETVAL=$?
 432             ;;
 433         restart)
 434             $0 stop
 435             sleep 1
 436             $0 start
 437             exit $?
 438             ;;
 439         install)
 440             shift
 441             [ $# -eq 0 ] || smartd_opts="$*"
 442             dep=
 443             if cygrunsrv -L 2>/dev/null | grep "^syslogd$" >/dev/null 2>&1; then
 444                 dep="-y syslogd"
 445             else
 446                 echo "Warning: syslogd service not installed, smartd will write to windows event log.";
 447             fi
 448             echo "Installing service ${smartd_svcname}${smartd_opts+ with options '$smartd_opts'}:"
 449             cygrunsrv -I "$smartd_svcname" -d "$smartd_svcdisp"  -f "$smartd_svcdesc" $dep \
 450               -e CYGWIN="$CYGWIN" -p $SMARTD_BIN -a "-n -p ${PID_FILE}${smartd_opts+ }$smartd_opts"
 451             RETVAL=$?
 452             ;;
 453         remove)
 454             echo "Removing service $smartd_svcname:"
 455             cygrunsrv -R "$smartd_svcname"
 456             RETVAL=$?
 457             ;;
 458         status)
 459             echo -n "Checking smartd status: "
 460             if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then
 461                 if cygrunsrv -Q "$smartd_svcname" 2>/dev/null | grep "State *: Running" >/dev/null 2>&1; then
 462                     echo "running as service '$smartd_svcname'."
 463                 elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then
 464                     echo "installed as service '$smartd_svcname' but running as daemon."
 465                 else
 466                     echo "installed as service '$smartd_svcname' but not running."
 467                     RETVAL=1
 468                 fi
 469             elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then
 470                 echo "running as daemon."
 471             else
 472                 echo "not running."
 473                 RETVAL=1
 474             fi
 475             exit $RETVAL
 476             ;;
 477         *)
 478             echo "Usage: $0 {start|stop|restart|reload|report|status}"
 479             echo "       $0 {install [options]|remove}"
 480             exit 1
 481     esac
 482
 483     if [ "$RETVAL" -eq 0 ]; then echo "done"; else echo "ERROR"; fi
 484     exit $RETVAL
 485
 486 # Add other OSes HERE, using elif...
 487 else
 488     report_unsupported "Unknown"
 489 fi
 490
 491 # One should NEVER arrive here, except for a badly written case above,
 492 # that fails to exit.
 493 echo "SOMETHING IS WRONG WITH THE SMARTD STARTUP SCRIPT"
 494 echo "PLEASE CONTACT smartmontools-support@lists.sourceforge.net"
 495 exit 1