etc/init.d: decide which variant to use at build time.

[mirror_zfs.git] / module / zfs / vdev_queue.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or https://opensource.org/licenses/CDDL-1.0.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * Copyright (c) 2012, 2018 by Delphix. All rights reserved.
 */

#include <sys/zfs_context.h>
#include <sys/vdev_impl.h>
#include <sys/spa_impl.h>
#include <sys/zio.h>
#include <sys/avl.h>
#include <sys/dsl_pool.h>
#include <sys/metaslab_impl.h>
#include <sys/spa.h>
#include <sys/abd.h>

/*
 * ZFS I/O Scheduler
 * ---------------
 *
 * ZFS issues I/O operations to leaf vdevs to satisfy and complete zios.  The
 * I/O scheduler determines when and in what order those operations are
 * issued.  The I/O scheduler divides operations into five I/O classes
 * prioritized in the following order: sync read, sync write, async read,
 * async write, and scrub/resilver.  Each queue defines the minimum and
 * maximum number of concurrent operations that may be issued to the device.
 * In addition, the device has an aggregate maximum. Note that the sum of the
 * per-queue minimums must not exceed the aggregate maximum. If the
 * sum of the per-queue maximums exceeds the aggregate maximum, then the
 * number of active i/os may reach zfs_vdev_max_active, in which case no
 * further i/os will be issued regardless of whether all per-queue
 * minimums have been met.
 *
 * For many physical devices, throughput increases with the number of
 * concurrent operations, but latency typically suffers. Further, physical
 * devices typically have a limit at which more concurrent operations have no
 * effect on throughput or can actually cause it to decrease.
 *
 * The scheduler selects the next operation to issue by first looking for an
 * I/O class whose minimum has not been satisfied. Once all are satisfied and
 * the aggregate maximum has not been hit, the scheduler looks for classes
 * whose maximum has not been satisfied. Iteration through the I/O classes is
 * done in the order specified above. No further operations are issued if the
 * aggregate maximum number of concurrent operations has been hit or if there
 * are no operations queued for an I/O class that has not hit its maximum.
 * Every time an i/o is queued or an operation completes, the I/O scheduler
 * looks for new operations to issue.
 *
 * All I/O classes have a fixed maximum number of outstanding operations
 * except for the async write class. Asynchronous writes represent the data
 * that is committed to stable storage during the syncing stage for
 * transaction groups (see txg.c). Transaction groups enter the syncing state
 * periodically so the number of queued async writes will quickly burst up and
 * then bleed down to zero. Rather than servicing them as quickly as possible,
 * the I/O scheduler changes the maximum number of active async write i/os
 * according to the amount of dirty data in the pool (see dsl_pool.c). Since
 * both throughput and latency typically increase with the number of
 * concurrent operations issued to physical devices, reducing the burstiness
 * in the number of concurrent operations also stabilizes the response time of
 * operations from other -- and in particular synchronous -- queues. In broad
 * strokes, the I/O scheduler will issue more concurrent operations from the
 * async write queue as there's more dirty data in the pool.
 *
 * Async Writes
 *
 * The number of concurrent operations issued for the async write I/O class
 * follows a piece-wise linear function defined by a few adjustable points.
 *
 *        |                   o---------| <-- zfs_vdev_async_write_max_active
 *   ^    |                  /^         |
 *   |    |                 / |         |
 * active |                /  |         |
 *  I/O   |               /   |         |
 * count  |              /    |         |
 *        |             /     |         |
 *        |------------o      |         | <-- zfs_vdev_async_write_min_active
 *       0|____________^______|_________|
 *        0%           |      |       100% of zfs_dirty_data_max
 *                     |      |
 *                     |      `-- zfs_vdev_async_write_active_max_dirty_percent
 *                     `--------- zfs_vdev_async_write_active_min_dirty_percent
 *
 * Until the amount of dirty data exceeds a minimum percentage of the dirty
 * data allowed in the pool, the I/O scheduler will limit the number of
 * concurrent operations to the minimum. As that threshold is crossed, the
 * number of concurrent operations issued increases linearly to the maximum at
 * the specified maximum percentage of the dirty data allowed in the pool.
 *
 * Ideally, the amount of dirty data on a busy pool will stay in the sloped
 * part of the function between zfs_vdev_async_write_active_min_dirty_percent
 * and zfs_vdev_async_write_active_max_dirty_percent. If it exceeds the
 * maximum percentage, this indicates that the rate of incoming data is
 * greater than the rate that the backend storage can handle. In this case, we
 * must further throttle incoming writes (see dmu_tx_delay() for details).
 */

/*
 * The maximum number of i/os active to each device.  Ideally, this will be >=
 * the sum of each queue's max_active.
 */
uint_t zfs_vdev_max_active = 1000;

/*
 * Per-queue limits on the number of i/os active to each device.  If the
 * number of active i/os is < zfs_vdev_max_active, then the min_active comes
 * into play.  We will send min_active from each queue round-robin, and then
 * send from queues in the order defined by zio_priority_t up to max_active.
 * Some queues have additional mechanisms to limit number of active I/Os in
 * addition to min_active and max_active, see below.
 *
 * In general, smaller max_active's will lead to lower latency of synchronous
 * operations.  Larger max_active's may lead to higher overall throughput,
 * depending on underlying storage.
 *
 * The ratio of the queues' max_actives determines the balance of performance
 * between reads, writes, and scrubs.  E.g., increasing
 * zfs_vdev_scrub_max_active will cause the scrub or resilver to complete
 * more quickly, but reads and writes to have higher latency and lower
 * throughput.
 */
static uint_t zfs_vdev_sync_read_min_active = 10;
static uint_t zfs_vdev_sync_read_max_active = 10;
static uint_t zfs_vdev_sync_write_min_active = 10;
static uint_t zfs_vdev_sync_write_max_active = 10;
static uint_t zfs_vdev_async_read_min_active = 1;
/*  */ uint_t zfs_vdev_async_read_max_active = 3;
static uint_t zfs_vdev_async_write_min_active = 2;
/*  */ uint_t zfs_vdev_async_write_max_active = 10;
static uint_t zfs_vdev_scrub_min_active = 1;
static uint_t zfs_vdev_scrub_max_active = 3;
static uint_t zfs_vdev_removal_min_active = 1;
static uint_t zfs_vdev_removal_max_active = 2;
static uint_t zfs_vdev_initializing_min_active = 1;
static uint_t zfs_vdev_initializing_max_active = 1;
static uint_t zfs_vdev_trim_min_active = 1;
static uint_t zfs_vdev_trim_max_active = 2;
static uint_t zfs_vdev_rebuild_min_active = 1;
static uint_t zfs_vdev_rebuild_max_active = 3;

/*
 * When the pool has less than zfs_vdev_async_write_active_min_dirty_percent
 * dirty data, use zfs_vdev_async_write_min_active.  When it has more than
 * zfs_vdev_async_write_active_max_dirty_percent, use
 * zfs_vdev_async_write_max_active. The value is linearly interpolated
 * between min and max.
 */
uint_t zfs_vdev_async_write_active_min_dirty_percent = 30;
uint_t zfs_vdev_async_write_active_max_dirty_percent = 60;

/*
 * For non-interactive I/O (scrub, resilver, removal, initialize and rebuild),
 * the number of concurrently-active I/O's is limited to *_min_active, unless
 * the vdev is "idle".  When there are no interactive I/Os active (sync or
 * async), and zfs_vdev_nia_delay I/Os have completed since the last
 * interactive I/O, then the vdev is considered to be "idle", and the number
 * of concurrently-active non-interactive I/O's is increased to *_max_active.
 */
static uint_t zfs_vdev_nia_delay = 5;

/*
 * Some HDDs tend to prioritize sequential I/O so high that concurrent
 * random I/O latency reaches several seconds.  On some HDDs it happens
 * even if sequential I/Os are submitted one at a time, and so setting
 * *_max_active to 1 does not help.  To prevent non-interactive I/Os, like
 * scrub, from monopolizing the device no more than zfs_vdev_nia_credit
 * I/Os can be sent while there are outstanding incomplete interactive
 * I/Os.  This enforced wait ensures the HDD services the interactive I/O
 * within a reasonable amount of time.
 */
static uint_t zfs_vdev_nia_credit = 5;

/*
 * To reduce IOPs, we aggregate small adjacent I/Os into one large I/O.
 * For read I/Os, we also aggregate across small adjacency gaps; for writes
 * we include spans of optional I/Os to aid aggregation at the disk even when
 * they aren't able to help us aggregate at this level.
 */
static uint_t zfs_vdev_aggregation_limit = 1 << 20;
static uint_t zfs_vdev_aggregation_limit_non_rotating = SPA_OLD_MAXBLOCKSIZE;
static uint_t zfs_vdev_read_gap_limit = 32 << 10;
static uint_t zfs_vdev_write_gap_limit = 4 << 10;

/*
 * Define the queue depth percentage for each top-level. This percentage is
 * used in conjunction with zfs_vdev_async_max_active to determine how many
 * allocations a specific top-level vdev should handle. Once the queue depth
 * reaches zfs_vdev_queue_depth_pct * zfs_vdev_async_write_max_active / 100
 * then allocator will stop allocating blocks on that top-level device.
 * The default kernel setting is 1000% which will yield 100 allocations per
 * device. For userland testing, the default setting is 300% which equates
 * to 30 allocations per device.
 */
#ifdef _KERNEL
uint_t zfs_vdev_queue_depth_pct = 1000;
#else
uint_t zfs_vdev_queue_depth_pct = 300;
#endif

/*
 * When performing allocations for a given metaslab, we want to make sure that
 * there are enough IOs to aggregate together to improve throughput. We want to
 * ensure that there are at least 128k worth of IOs that can be aggregated, and
 * we assume that the average allocation size is 4k, so we need the queue depth
 * to be 32 per allocator to get good aggregation of sequential writes.
 */
uint_t zfs_vdev_def_queue_depth = 32;

static int
vdev_queue_offset_compare(const void *x1, const void *x2)
{
        const zio_t *z1 = (const zio_t *)x1;
        const zio_t *z2 = (const zio_t *)x2;

        int cmp = TREE_CMP(z1->io_offset, z2->io_offset);

        if (likely(cmp))
                return (cmp);

        return (TREE_PCMP(z1, z2));
}

#define VDQ_T_SHIFT 29

static int
vdev_queue_to_compare(const void *x1, const void *x2)
{
        const zio_t *z1 = (const zio_t *)x1;
        const zio_t *z2 = (const zio_t *)x2;

        int tcmp = TREE_CMP(z1->io_timestamp >> VDQ_T_SHIFT,
            z2->io_timestamp >> VDQ_T_SHIFT);
        int ocmp = TREE_CMP(z1->io_offset, z2->io_offset);
        int cmp = tcmp ? tcmp : ocmp;

        if (likely(cmp | (z1->io_queue_state == ZIO_QS_NONE)))
                return (cmp);

        return (TREE_PCMP(z1, z2));
}

static inline boolean_t
vdev_queue_class_fifo(zio_priority_t p)
{
        return (p == ZIO_PRIORITY_SYNC_READ || p == ZIO_PRIORITY_SYNC_WRITE ||
            p == ZIO_PRIORITY_TRIM);
}

static void
vdev_queue_class_add(vdev_queue_t *vq, zio_t *zio)
{
        zio_priority_t p = zio->io_priority;
        vq->vq_cqueued |= 1U << p;
        if (vdev_queue_class_fifo(p)) {
                list_insert_tail(&vq->vq_class[p].vqc_list, zio);
                vq->vq_class[p].vqc_list_numnodes++;
        }
        else
                avl_add(&vq->vq_class[p].vqc_tree, zio);
}

static void
vdev_queue_class_remove(vdev_queue_t *vq, zio_t *zio)
{
        zio_priority_t p = zio->io_priority;
        uint32_t empty;
        if (vdev_queue_class_fifo(p)) {
                list_t *list = &vq->vq_class[p].vqc_list;
                list_remove(list, zio);
                empty = list_is_empty(list);
                vq->vq_class[p].vqc_list_numnodes--;
        } else {
                avl_tree_t *tree = &vq->vq_class[p].vqc_tree;
                avl_remove(tree, zio);
                empty = avl_is_empty(tree);
        }
        vq->vq_cqueued &= ~(empty << p);
}

static uint_t
vdev_queue_class_min_active(vdev_queue_t *vq, zio_priority_t p)
{
        switch (p) {
        case ZIO_PRIORITY_SYNC_READ:
                return (zfs_vdev_sync_read_min_active);
        case ZIO_PRIORITY_SYNC_WRITE:
                return (zfs_vdev_sync_write_min_active);
        case ZIO_PRIORITY_ASYNC_READ:
                return (zfs_vdev_async_read_min_active);
        case ZIO_PRIORITY_ASYNC_WRITE:
                return (zfs_vdev_async_write_min_active);
        case ZIO_PRIORITY_SCRUB:
                return (vq->vq_ia_active == 0 ? zfs_vdev_scrub_min_active :
                    MIN(vq->vq_nia_credit, zfs_vdev_scrub_min_active));
        case ZIO_PRIORITY_REMOVAL:
                return (vq->vq_ia_active == 0 ? zfs_vdev_removal_min_active :
                    MIN(vq->vq_nia_credit, zfs_vdev_removal_min_active));
        case ZIO_PRIORITY_INITIALIZING:
                return (vq->vq_ia_active == 0 ?zfs_vdev_initializing_min_active:
                    MIN(vq->vq_nia_credit, zfs_vdev_initializing_min_active));
        case ZIO_PRIORITY_TRIM:
                return (zfs_vdev_trim_min_active);
        case ZIO_PRIORITY_REBUILD:
                return (vq->vq_ia_active == 0 ? zfs_vdev_rebuild_min_active :
                    MIN(vq->vq_nia_credit, zfs_vdev_rebuild_min_active));
        default:
                panic("invalid priority %u", p);
                return (0);
        }
}

static uint_t
vdev_queue_max_async_writes(spa_t *spa)
{
        uint_t writes;
        uint64_t dirty = 0;
        dsl_pool_t *dp = spa_get_dsl(spa);
        uint64_t min_bytes = zfs_dirty_data_max *
            zfs_vdev_async_write_active_min_dirty_percent / 100;
        uint64_t max_bytes = zfs_dirty_data_max *
            zfs_vdev_async_write_active_max_dirty_percent / 100;

        /*
         * Async writes may occur before the assignment of the spa's
         * dsl_pool_t if a self-healing zio is issued prior to the
         * completion of dmu_objset_open_impl().
         */
        if (dp == NULL)
                return (zfs_vdev_async_write_max_active);

        /*
         * Sync tasks correspond to interactive user actions. To reduce the
         * execution time of those actions we push data out as fast as possible.
         */
        dirty = dp->dp_dirty_total;
        if (dirty > max_bytes || spa_has_pending_synctask(spa))
                return (zfs_vdev_async_write_max_active);

        if (dirty < min_bytes)
                return (zfs_vdev_async_write_min_active);

        /*
         * linear interpolation:
         * slope = (max_writes - min_writes) / (max_bytes - min_bytes)
         * move right by min_bytes
         * move up by min_writes
         */
        writes = (dirty - min_bytes) *
            (zfs_vdev_async_write_max_active -
            zfs_vdev_async_write_min_active) /
            (max_bytes - min_bytes) +
            zfs_vdev_async_write_min_active;
        ASSERT3U(writes, >=, zfs_vdev_async_write_min_active);
        ASSERT3U(writes, <=, zfs_vdev_async_write_max_active);
        return (writes);
}

static uint_t
vdev_queue_class_max_active(vdev_queue_t *vq, zio_priority_t p)
{
        switch (p) {
        case ZIO_PRIORITY_SYNC_READ:
                return (zfs_vdev_sync_read_max_active);
        case ZIO_PRIORITY_SYNC_WRITE:
                return (zfs_vdev_sync_write_max_active);
        case ZIO_PRIORITY_ASYNC_READ:
                return (zfs_vdev_async_read_max_active);
        case ZIO_PRIORITY_ASYNC_WRITE:
                return (vdev_queue_max_async_writes(vq->vq_vdev->vdev_spa));
        case ZIO_PRIORITY_SCRUB:
                if (vq->vq_ia_active > 0) {
                        return (MIN(vq->vq_nia_credit,
                            zfs_vdev_scrub_min_active));
                } else if (vq->vq_nia_credit < zfs_vdev_nia_delay)
                        return (MAX(1, zfs_vdev_scrub_min_active));
                return (zfs_vdev_scrub_max_active);
        case ZIO_PRIORITY_REMOVAL:
                if (vq->vq_ia_active > 0) {
                        return (MIN(vq->vq_nia_credit,
                            zfs_vdev_removal_min_active));
                } else if (vq->vq_nia_credit < zfs_vdev_nia_delay)
                        return (MAX(1, zfs_vdev_removal_min_active));
                return (zfs_vdev_removal_max_active);
        case ZIO_PRIORITY_INITIALIZING:
                if (vq->vq_ia_active > 0) {
                        return (MIN(vq->vq_nia_credit,
                            zfs_vdev_initializing_min_active));
                } else if (vq->vq_nia_credit < zfs_vdev_nia_delay)
                        return (MAX(1, zfs_vdev_initializing_min_active));
                return (zfs_vdev_initializing_max_active);
        case ZIO_PRIORITY_TRIM:
                return (zfs_vdev_trim_max_active);
        case ZIO_PRIORITY_REBUILD:
                if (vq->vq_ia_active > 0) {
                        return (MIN(vq->vq_nia_credit,
                            zfs_vdev_rebuild_min_active));
                } else if (vq->vq_nia_credit < zfs_vdev_nia_delay)
                        return (MAX(1, zfs_vdev_rebuild_min_active));
                return (zfs_vdev_rebuild_max_active);
        default:
                panic("invalid priority %u", p);
                return (0);
        }
}

/*
 * Return the i/o class to issue from, or ZIO_PRIORITY_NUM_QUEUEABLE if
 * there is no eligible class.
 */
static zio_priority_t
vdev_queue_class_to_issue(vdev_queue_t *vq)
{
        uint32_t cq = vq->vq_cqueued;
        zio_priority_t p, p1;

        if (cq == 0 || vq->vq_active >= zfs_vdev_max_active)
                return (ZIO_PRIORITY_NUM_QUEUEABLE);

        /*
         * Find a queue that has not reached its minimum # outstanding i/os.
         * Do round-robin to reduce starvation due to zfs_vdev_max_active
         * and vq_nia_credit limits.
         */
        p1 = vq->vq_last_prio + 1;
        if (p1 >= ZIO_PRIORITY_NUM_QUEUEABLE)
                p1 = 0;
        for (p = p1; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if ((cq & (1U << p)) != 0 && vq->vq_cactive[p] <
                    vdev_queue_class_min_active(vq, p))
                        goto found;
        }
        for (p = 0; p < p1; p++) {
                if ((cq & (1U << p)) != 0 && vq->vq_cactive[p] <
                    vdev_queue_class_min_active(vq, p))
                        goto found;
        }

        /*
         * If we haven't found a queue, look for one that hasn't reached its
         * maximum # outstanding i/os.
         */
        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if ((cq & (1U << p)) != 0 && vq->vq_cactive[p] <
                    vdev_queue_class_max_active(vq, p))
                        break;
        }

found:
        vq->vq_last_prio = p;
        return (p);
}

void
vdev_queue_init(vdev_t *vd)
{
        vdev_queue_t *vq = &vd->vdev_queue;
        zio_priority_t p;

        vq->vq_vdev = vd;

        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if (vdev_queue_class_fifo(p)) {
                        list_create(&vq->vq_class[p].vqc_list,
                            sizeof (zio_t),
                            offsetof(struct zio, io_queue_node.l));
                } else {
                        avl_create(&vq->vq_class[p].vqc_tree,
                            vdev_queue_to_compare, sizeof (zio_t),
                            offsetof(struct zio, io_queue_node.a));
                }
        }
        avl_create(&vq->vq_read_offset_tree,
            vdev_queue_offset_compare, sizeof (zio_t),
            offsetof(struct zio, io_offset_node));
        avl_create(&vq->vq_write_offset_tree,
            vdev_queue_offset_compare, sizeof (zio_t),
            offsetof(struct zio, io_offset_node));

        vq->vq_last_offset = 0;
        list_create(&vq->vq_active_list, sizeof (struct zio),
            offsetof(struct zio, io_queue_node.l));
        mutex_init(&vq->vq_lock, NULL, MUTEX_DEFAULT, NULL);
}

void
vdev_queue_fini(vdev_t *vd)
{
        vdev_queue_t *vq = &vd->vdev_queue;

        for (zio_priority_t p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if (vdev_queue_class_fifo(p))
                        list_destroy(&vq->vq_class[p].vqc_list);
                else
                        avl_destroy(&vq->vq_class[p].vqc_tree);
        }
        avl_destroy(&vq->vq_read_offset_tree);
        avl_destroy(&vq->vq_write_offset_tree);

        list_destroy(&vq->vq_active_list);
        mutex_destroy(&vq->vq_lock);
}

static void
vdev_queue_io_add(vdev_queue_t *vq, zio_t *zio)
{
        zio->io_queue_state = ZIO_QS_QUEUED;
        vdev_queue_class_add(vq, zio);
        if (zio->io_type == ZIO_TYPE_READ)
                avl_add(&vq->vq_read_offset_tree, zio);
        else if (zio->io_type == ZIO_TYPE_WRITE)
                avl_add(&vq->vq_write_offset_tree, zio);
}

static void
vdev_queue_io_remove(vdev_queue_t *vq, zio_t *zio)
{
        vdev_queue_class_remove(vq, zio);
        if (zio->io_type == ZIO_TYPE_READ)
                avl_remove(&vq->vq_read_offset_tree, zio);
        else if (zio->io_type == ZIO_TYPE_WRITE)
                avl_remove(&vq->vq_write_offset_tree, zio);
        zio->io_queue_state = ZIO_QS_NONE;
}

static boolean_t
vdev_queue_is_interactive(zio_priority_t p)
{
        switch (p) {
        case ZIO_PRIORITY_SCRUB:
        case ZIO_PRIORITY_REMOVAL:
        case ZIO_PRIORITY_INITIALIZING:
        case ZIO_PRIORITY_REBUILD:
                return (B_FALSE);
        default:
                return (B_TRUE);
        }
}

static void
vdev_queue_pending_add(vdev_queue_t *vq, zio_t *zio)
{
        ASSERT(MUTEX_HELD(&vq->vq_lock));
        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        vq->vq_cactive[zio->io_priority]++;
        vq->vq_active++;
        if (vdev_queue_is_interactive(zio->io_priority)) {
                if (++vq->vq_ia_active == 1)
                        vq->vq_nia_credit = 1;
        } else if (vq->vq_ia_active > 0) {
                vq->vq_nia_credit--;
        }
        zio->io_queue_state = ZIO_QS_ACTIVE;
        list_insert_tail(&vq->vq_active_list, zio);
}

static void
vdev_queue_pending_remove(vdev_queue_t *vq, zio_t *zio)
{
        ASSERT(MUTEX_HELD(&vq->vq_lock));
        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        vq->vq_cactive[zio->io_priority]--;
        vq->vq_active--;
        if (vdev_queue_is_interactive(zio->io_priority)) {
                if (--vq->vq_ia_active == 0)
                        vq->vq_nia_credit = 0;
                else
                        vq->vq_nia_credit = zfs_vdev_nia_credit;
        } else if (vq->vq_ia_active == 0)
                vq->vq_nia_credit++;
        list_remove(&vq->vq_active_list, zio);
        zio->io_queue_state = ZIO_QS_NONE;
}

static void
vdev_queue_agg_io_done(zio_t *aio)
{
        abd_free(aio->io_abd);
}

/*
 * Compute the range spanned by two i/os, which is the endpoint of the last
 * (lio->io_offset + lio->io_size) minus start of the first (fio->io_offset).
 * Conveniently, the gap between fio and lio is given by -IO_SPAN(lio, fio);
 * thus fio and lio are adjacent if and only if IO_SPAN(lio, fio) == 0.
 */
#define IO_SPAN(fio, lio) ((lio)->io_offset + (lio)->io_size - (fio)->io_offset)
#define IO_GAP(fio, lio) (-IO_SPAN(lio, fio))

/*
 * Sufficiently adjacent io_offset's in ZIOs will be aggregated. We do this
 * by creating a gang ABD from the adjacent ZIOs io_abd's. By using
 * a gang ABD we avoid doing memory copies to and from the parent,
 * child ZIOs. The gang ABD also accounts for gaps between adjacent
 * io_offsets by simply getting the zero ABD for writes or allocating
 * a new ABD for reads and placing them in the gang ABD as well.
 */
static zio_t *
vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio)
{
        zio_t *first, *last, *aio, *dio, *mandatory, *nio;
        uint64_t maxgap = 0;
        uint64_t size;
        uint64_t limit;
        boolean_t stretch = B_FALSE;
        uint64_t next_offset;
        abd_t *abd;
        avl_tree_t *t;

        /*
         * TRIM aggregation should not be needed since code in zfs_trim.c can
         * submit TRIM I/O for extents up to zfs_trim_extent_bytes_max (128M).
         */
        if (zio->io_type == ZIO_TYPE_TRIM)
                return (NULL);

        if (zio->io_flags & ZIO_FLAG_DONT_AGGREGATE)
                return (NULL);

        if (vq->vq_vdev->vdev_nonrot)
                limit = zfs_vdev_aggregation_limit_non_rotating;
        else
                limit = zfs_vdev_aggregation_limit;
        if (limit == 0)
                return (NULL);
        limit = MIN(limit, SPA_MAXBLOCKSIZE);

        /*
         * I/Os to distributed spares are directly dispatched to the dRAID
         * leaf vdevs for aggregation.  See the comment at the end of the
         * zio_vdev_io_start() function.
         */
        ASSERT(vq->vq_vdev->vdev_ops != &vdev_draid_spare_ops);

        first = last = zio;

        if (zio->io_type == ZIO_TYPE_READ) {
                maxgap = zfs_vdev_read_gap_limit;
                t = &vq->vq_read_offset_tree;
        } else {
                ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
                t = &vq->vq_write_offset_tree;
        }

        /*
         * We can aggregate I/Os that are sufficiently adjacent and of
         * the same flavor, as expressed by the AGG_INHERIT flags.
         * The latter requirement is necessary so that certain
         * attributes of the I/O, such as whether it's a normal I/O
         * or a scrub/resilver, can be preserved in the aggregate.
         * We can include optional I/Os, but don't allow them
         * to begin a range as they add no benefit in that situation.
         */

        /*
         * We keep track of the last non-optional I/O.
         */
        mandatory = (first->io_flags & ZIO_FLAG_OPTIONAL) ? NULL : first;

        /*
         * Walk backwards through sufficiently contiguous I/Os
         * recording the last non-optional I/O.
         */
        zio_flag_t flags = zio->io_flags & ZIO_FLAG_AGG_INHERIT;
        while ((dio = AVL_PREV(t, first)) != NULL &&
            (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
            IO_SPAN(dio, last) <= limit &&
            IO_GAP(dio, first) <= maxgap &&
            dio->io_type == zio->io_type) {
                first = dio;
                if (mandatory == NULL && !(first->io_flags & ZIO_FLAG_OPTIONAL))
                        mandatory = first;
        }

        /*
         * Skip any initial optional I/Os.
         */
        while ((first->io_flags & ZIO_FLAG_OPTIONAL) && first != last) {
                first = AVL_NEXT(t, first);
                ASSERT(first != NULL);
        }


        /*
         * Walk forward through sufficiently contiguous I/Os.
         * The aggregation limit does not apply to optional i/os, so that
         * we can issue contiguous writes even if they are larger than the
         * aggregation limit.
         */
        while ((dio = AVL_NEXT(t, last)) != NULL &&
            (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
            (IO_SPAN(first, dio) <= limit ||
            (dio->io_flags & ZIO_FLAG_OPTIONAL)) &&
            IO_SPAN(first, dio) <= SPA_MAXBLOCKSIZE &&
            IO_GAP(last, dio) <= maxgap &&
            dio->io_type == zio->io_type) {
                last = dio;
                if (!(last->io_flags & ZIO_FLAG_OPTIONAL))
                        mandatory = last;
        }

        /*
         * Now that we've established the range of the I/O aggregation
         * we must decide what to do with trailing optional I/Os.
         * For reads, there's nothing to do. While we are unable to
         * aggregate further, it's possible that a trailing optional
         * I/O would allow the underlying device to aggregate with
         * subsequent I/Os. We must therefore determine if the next
         * non-optional I/O is close enough to make aggregation
         * worthwhile.
         */
        if (zio->io_type == ZIO_TYPE_WRITE && mandatory != NULL) {
                zio_t *nio = last;
                while ((dio = AVL_NEXT(t, nio)) != NULL &&
                    IO_GAP(nio, dio) == 0 &&
                    IO_GAP(mandatory, dio) <= zfs_vdev_write_gap_limit) {
                        nio = dio;
                        if (!(nio->io_flags & ZIO_FLAG_OPTIONAL)) {
                                stretch = B_TRUE;
                                break;
                        }
                }
        }

        if (stretch) {
                /*
                 * We are going to include an optional io in our aggregated
                 * span, thus closing the write gap.  Only mandatory i/os can
                 * start aggregated spans, so make sure that the next i/o
                 * after our span is mandatory.
                 */
                dio = AVL_NEXT(t, last);
                ASSERT3P(dio, !=, NULL);
                dio->io_flags &= ~ZIO_FLAG_OPTIONAL;
        } else {
                /* do not include the optional i/o */
                while (last != mandatory && last != first) {
                        ASSERT(last->io_flags & ZIO_FLAG_OPTIONAL);
                        last = AVL_PREV(t, last);
                        ASSERT(last != NULL);
                }
        }

        if (first == last)
                return (NULL);

        size = IO_SPAN(first, last);
        ASSERT3U(size, <=, SPA_MAXBLOCKSIZE);

        abd = abd_alloc_gang();
        if (abd == NULL)
                return (NULL);

        aio = zio_vdev_delegated_io(first->io_vd, first->io_offset,
            abd, size, first->io_type, zio->io_priority,
            flags | ZIO_FLAG_DONT_QUEUE, vdev_queue_agg_io_done, NULL);
        aio->io_timestamp = first->io_timestamp;

        nio = first;
        next_offset = first->io_offset;
        do {
                dio = nio;
                nio = AVL_NEXT(t, dio);
                ASSERT3P(dio, !=, NULL);
                zio_add_child(dio, aio);
                vdev_queue_io_remove(vq, dio);

                if (dio->io_offset != next_offset) {
                        /* allocate a buffer for a read gap */
                        ASSERT3U(dio->io_type, ==, ZIO_TYPE_READ);
                        ASSERT3U(dio->io_offset, >, next_offset);
                        abd = abd_alloc_for_io(
                            dio->io_offset - next_offset, B_TRUE);
                        abd_gang_add(aio->io_abd, abd, B_TRUE);
                }
                if (dio->io_abd &&
                    (dio->io_size != abd_get_size(dio->io_abd))) {
                        /* abd size not the same as IO size */
                        ASSERT3U(abd_get_size(dio->io_abd), >, dio->io_size);
                        abd = abd_get_offset_size(dio->io_abd, 0, dio->io_size);
                        abd_gang_add(aio->io_abd, abd, B_TRUE);
                } else {
                        if (dio->io_flags & ZIO_FLAG_NODATA) {
                                /* allocate a buffer for a write gap */
                                ASSERT3U(dio->io_type, ==, ZIO_TYPE_WRITE);
                                ASSERT3P(dio->io_abd, ==, NULL);
                                abd_gang_add(aio->io_abd,
                                    abd_get_zeros(dio->io_size), B_TRUE);
                        } else {
                                /*
                                 * We pass B_FALSE to abd_gang_add()
                                 * because we did not allocate a new
                                 * ABD, so it is assumed the caller
                                 * will free this ABD.
                                 */
                                abd_gang_add(aio->io_abd, dio->io_abd,
                                    B_FALSE);
                        }
                }
                next_offset = dio->io_offset + dio->io_size;
        } while (dio != last);
        ASSERT3U(abd_get_size(aio->io_abd), ==, aio->io_size);

        /*
         * Callers must call zio_vdev_io_bypass() and zio_execute() for
         * aggregated (parent) I/Os so that we could avoid dropping the
         * queue's lock here to avoid a deadlock that we could encounter
         * due to lock order reversal between vq_lock and io_lock in
         * zio_change_priority().
         */
        return (aio);
}

static zio_t *
vdev_queue_io_to_issue(vdev_queue_t *vq)
{
        zio_t *zio, *aio;
        zio_priority_t p;
        avl_index_t idx;
        avl_tree_t *tree;

again:
        ASSERT(MUTEX_HELD(&vq->vq_lock));

        p = vdev_queue_class_to_issue(vq);

        if (p == ZIO_PRIORITY_NUM_QUEUEABLE) {
                /* No eligible queued i/os */
                return (NULL);
        }

        if (vdev_queue_class_fifo(p)) {
                zio = list_head(&vq->vq_class[p].vqc_list);
        } else {
                /*
                 * For LBA-ordered queues (async / scrub / initializing),
                 * issue the I/O which follows the most recently issued I/O
                 * in LBA (offset) order, but to avoid starvation only within
                 * the same 0.5 second interval as the first I/O.
                 */
                tree = &vq->vq_class[p].vqc_tree;
                zio = aio = avl_first(tree);
                if (zio->io_offset < vq->vq_last_offset) {
                        vq->vq_io_search.io_timestamp = zio->io_timestamp;
                        vq->vq_io_search.io_offset = vq->vq_last_offset;
                        zio = avl_find(tree, &vq->vq_io_search, &idx);
                        if (zio == NULL) {
                                zio = avl_nearest(tree, idx, AVL_AFTER);
                                if (zio == NULL ||
                                    (zio->io_timestamp >> VDQ_T_SHIFT) !=
                                    (aio->io_timestamp >> VDQ_T_SHIFT))
                                        zio = aio;
                        }
                }
        }
        ASSERT3U(zio->io_priority, ==, p);

        aio = vdev_queue_aggregate(vq, zio);
        if (aio != NULL) {
                zio = aio;
        } else {
                vdev_queue_io_remove(vq, zio);

                /*
                 * If the I/O is or was optional and therefore has no data, we
                 * need to simply discard it. We need to drop the vdev queue's
                 * lock to avoid a deadlock that we could encounter since this
                 * I/O will complete immediately.
                 */
                if (zio->io_flags & ZIO_FLAG_NODATA) {
                        mutex_exit(&vq->vq_lock);
                        zio_vdev_io_bypass(zio);
                        zio_execute(zio);
                        mutex_enter(&vq->vq_lock);
                        goto again;
                }
        }

        vdev_queue_pending_add(vq, zio);
        vq->vq_last_offset = zio->io_offset + zio->io_size;

        return (zio);
}

zio_t *
vdev_queue_io(zio_t *zio)
{
        vdev_queue_t *vq = &zio->io_vd->vdev_queue;
        zio_t *dio, *nio;
        zio_link_t *zl = NULL;

        if (zio->io_flags & ZIO_FLAG_DONT_QUEUE)
                return (zio);

        /*
         * Children i/os inherent their parent's priority, which might
         * not match the child's i/o type.  Fix it up here.
         */
        if (zio->io_type == ZIO_TYPE_READ) {
                ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);

                if (zio->io_priority != ZIO_PRIORITY_SYNC_READ &&
                    zio->io_priority != ZIO_PRIORITY_ASYNC_READ &&
                    zio->io_priority != ZIO_PRIORITY_SCRUB &&
                    zio->io_priority != ZIO_PRIORITY_REMOVAL &&
                    zio->io_priority != ZIO_PRIORITY_INITIALIZING &&
                    zio->io_priority != ZIO_PRIORITY_REBUILD) {
                        zio->io_priority = ZIO_PRIORITY_ASYNC_READ;
                }
        } else if (zio->io_type == ZIO_TYPE_WRITE) {
                ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);

                if (zio->io_priority != ZIO_PRIORITY_SYNC_WRITE &&
                    zio->io_priority != ZIO_PRIORITY_ASYNC_WRITE &&
                    zio->io_priority != ZIO_PRIORITY_REMOVAL &&
                    zio->io_priority != ZIO_PRIORITY_INITIALIZING &&
                    zio->io_priority != ZIO_PRIORITY_REBUILD) {
                        zio->io_priority = ZIO_PRIORITY_ASYNC_WRITE;
                }
        } else {
                ASSERT(zio->io_type == ZIO_TYPE_TRIM);
                ASSERT(zio->io_priority == ZIO_PRIORITY_TRIM);
        }

        zio->io_flags |= ZIO_FLAG_DONT_QUEUE;
        zio->io_timestamp = gethrtime();

        mutex_enter(&vq->vq_lock);
        vdev_queue_io_add(vq, zio);
        nio = vdev_queue_io_to_issue(vq);
        mutex_exit(&vq->vq_lock);

        if (nio == NULL)
                return (NULL);

        if (nio->io_done == vdev_queue_agg_io_done) {
                while ((dio = zio_walk_parents(nio, &zl)) != NULL) {
                        ASSERT3U(dio->io_type, ==, nio->io_type);
                        zio_vdev_io_bypass(dio);
                        zio_execute(dio);
                }
                zio_nowait(nio);
                return (NULL);
        }

        return (nio);
}

void
vdev_queue_io_done(zio_t *zio)
{
        vdev_queue_t *vq = &zio->io_vd->vdev_queue;
        zio_t *dio, *nio;
        zio_link_t *zl = NULL;

        hrtime_t now = gethrtime();
        vq->vq_io_complete_ts = now;
        vq->vq_io_delta_ts = zio->io_delta = now - zio->io_timestamp;

        mutex_enter(&vq->vq_lock);
        vdev_queue_pending_remove(vq, zio);

        while ((nio = vdev_queue_io_to_issue(vq)) != NULL) {
                mutex_exit(&vq->vq_lock);
                if (nio->io_done == vdev_queue_agg_io_done) {
                        while ((dio = zio_walk_parents(nio, &zl)) != NULL) {
                                ASSERT3U(dio->io_type, ==, nio->io_type);
                                zio_vdev_io_bypass(dio);
                                zio_execute(dio);
                        }
                        zio_nowait(nio);
                } else {
                        zio_vdev_io_reissue(nio);
                        zio_execute(nio);
                }
                mutex_enter(&vq->vq_lock);
        }

        mutex_exit(&vq->vq_lock);
}

void
vdev_queue_change_io_priority(zio_t *zio, zio_priority_t priority)
{
        vdev_queue_t *vq = &zio->io_vd->vdev_queue;

        /*
         * ZIO_PRIORITY_NOW is used by the vdev cache code and the aggregate zio
         * code to issue IOs without adding them to the vdev queue. In this
         * case, the zio is already going to be issued as quickly as possible
         * and so it doesn't need any reprioritization to help.
         */
        if (zio->io_priority == ZIO_PRIORITY_NOW)
                return;

        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        ASSERT3U(priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);

        if (zio->io_type == ZIO_TYPE_READ) {
                if (priority != ZIO_PRIORITY_SYNC_READ &&
                    priority != ZIO_PRIORITY_ASYNC_READ &&
                    priority != ZIO_PRIORITY_SCRUB)
                        priority = ZIO_PRIORITY_ASYNC_READ;
        } else {
                ASSERT(zio->io_type == ZIO_TYPE_WRITE);
                if (priority != ZIO_PRIORITY_SYNC_WRITE &&
                    priority != ZIO_PRIORITY_ASYNC_WRITE)
                        priority = ZIO_PRIORITY_ASYNC_WRITE;
        }

        mutex_enter(&vq->vq_lock);

        /*
         * If the zio is in none of the queues we can simply change
         * the priority. If the zio is waiting to be submitted we must
         * remove it from the queue and re-insert it with the new priority.
         * Otherwise, the zio is currently active and we cannot change its
         * priority.
         */
        if (zio->io_queue_state == ZIO_QS_QUEUED) {
                vdev_queue_class_remove(vq, zio);
                zio->io_priority = priority;
                vdev_queue_class_add(vq, zio);
        } else if (zio->io_queue_state == ZIO_QS_NONE) {
                zio->io_priority = priority;
        }

        mutex_exit(&vq->vq_lock);
}

/*
 * As these two methods are only used for load calculations we're not
 * concerned if we get an incorrect value on 32bit platforms due to lack of
 * vq_lock mutex use here, instead we prefer to keep it lock free for
 * performance.
 */
uint32_t
vdev_queue_length(vdev_t *vd)
{
        return (vd->vdev_queue.vq_active);
}

uint64_t
vdev_queue_last_offset(vdev_t *vd)
{
        return (vd->vdev_queue.vq_last_offset);
}

uint64_t
vdev_queue_class_length(vdev_t *vd, zio_priority_t p)
{
        vdev_queue_t *vq = &vd->vdev_queue;
        if (vdev_queue_class_fifo(p))
                return (vq->vq_class[p].vqc_list_numnodes);
        else
                return (avl_numnodes(&vq->vq_class[p].vqc_tree));
}

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, aggregation_limit, UINT, ZMOD_RW,
        "Max vdev I/O aggregation size");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, aggregation_limit_non_rotating, UINT,
        ZMOD_RW, "Max vdev I/O aggregation size for non-rotating media");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, read_gap_limit, UINT, ZMOD_RW,
        "Aggregate read I/O over gap");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, write_gap_limit, UINT, ZMOD_RW,
        "Aggregate write I/O over gap");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, max_active, UINT, ZMOD_RW,
        "Maximum number of active I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_write_active_max_dirty_percent,
        UINT, ZMOD_RW, "Async write concurrency max threshold");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_write_active_min_dirty_percent,
        UINT, ZMOD_RW, "Async write concurrency min threshold");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_read_max_active, UINT, ZMOD_RW,
        "Max active async read I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_read_min_active, UINT, ZMOD_RW,
        "Min active async read I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_write_max_active, UINT, ZMOD_RW,
        "Max active async write I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, async_write_min_active, UINT, ZMOD_RW,
        "Min active async write I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, initializing_max_active, UINT, ZMOD_RW,
        "Max active initializing I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, initializing_min_active, UINT, ZMOD_RW,
        "Min active initializing I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, removal_max_active, UINT, ZMOD_RW,
        "Max active removal I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, removal_min_active, UINT, ZMOD_RW,
        "Min active removal I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, scrub_max_active, UINT, ZMOD_RW,
        "Max active scrub I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, scrub_min_active, UINT, ZMOD_RW,
        "Min active scrub I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, sync_read_max_active, UINT, ZMOD_RW,
        "Max active sync read I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, sync_read_min_active, UINT, ZMOD_RW,
        "Min active sync read I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, sync_write_max_active, UINT, ZMOD_RW,
        "Max active sync write I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, sync_write_min_active, UINT, ZMOD_RW,
        "Min active sync write I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, trim_max_active, UINT, ZMOD_RW,
        "Max active trim/discard I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, trim_min_active, UINT, ZMOD_RW,
        "Min active trim/discard I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, rebuild_max_active, UINT, ZMOD_RW,
        "Max active rebuild I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, rebuild_min_active, UINT, ZMOD_RW,
        "Min active rebuild I/Os per vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, nia_credit, UINT, ZMOD_RW,
        "Number of non-interactive I/Os to allow in sequence");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, nia_delay, UINT, ZMOD_RW,
        "Number of non-interactive I/Os before _max_active");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, queue_depth_pct, UINT, ZMOD_RW,
        "Queue depth percentage for each top-level vdev");

ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, def_queue_depth, UINT, ZMOD_RW,
        "Default queue depth for each allocator");