explain 'nocheck' in more places

[qemu-server.git] / debian / changelog

qemu-server (7.2-12) bullseye; urgency=medium

  * config: only save unique tags when updating them via the API

  * api: create/update vm: fix clamping CPU units function calls

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Nov 2022 08:36:06 +0100

qemu-server (7.2-11) bullseye; urgency=medium

  * fdb: only manage FDB entries for Linux bridges, ignore OVS for now

 -- Proxmox Support Team <support@proxmox.com>  Sun, 20 Nov 2022 16:30:28 +0100

qemu-server (7.2-10) bullseye; urgency=medium

  * fix #4321: properly check cloud-init drive permissions, require both
    VM.Config.CDROM and VM.Config.Cloudinit, and not VM.Config.Disk, for being
    able to add a cloud init drive in the first place.

  * api: config update: enforce new tag permission system when setting or
    removing tags from a guest


  * parse config: do not validate informative values in cloud init section

  * fix edge-cases on new cloudinit pending/active recording

  * mtunnel: add API endpoints

  * migrate: add foundation for remote (external cluster) migration, add
    respective endpoints and qm `remote-migrate` CLI command

  * memory hotplug: make max-memory dynamically calculated from the physicall
    address bits the VM will use, that is the actual one from the config, if
    set, the one from the host for CPU type host and 40 bits as fallback for
    everything else. Calculate the addressable memory (e.g., 40 bits = 1 TiB)
    and half that for the possible max-memory a VM can use, using the previous
    hard-coded 4 TiB as overall maximum for backward compat.
    Admins with inhomogeneous CPUs and thus possible different bit-widths need
    to take special care themselves to ensure that a VM with memory hot-plug
    configured can run on other nodes, for example for live-migration.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Nov 2022 17:48:03 +0100

qemu-server (7.2-8) bullseye; urgency=medium

  * fix #4296: virtio-net: enable packed queues for qemu 7.1

  * virtio-net: increase defaults rx- and tx-queue-size to 1024

  * fix #4296: virtio-net: enable packed queues for QEMU machines using 7.1 or
    newer

  * net: increase max queues to 64

  * fix #4284: add read-only to non-hotpluggable disk options

  * delay cloudinit generation in hotplug

  * record cloud-init changes in the cloudinit section

  * rework cloudint config pending handling

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Nov 2022 18:23:39 +0100

qemu-server (7.2-7) bullseye; urgency=medium

  * api: create/update vm: automatically clamp cpuunit value depending of
    cgroup version

  * improve cloud init support and add cloudinit hotplug

  * vzdump: skip `special:cloudinit` section

  * fix #3890 - GUI: warn for unlikely iothread config clashes

  * fix #4228: add `start` parameter to snapshot rollback API so that one can
    automatocally start the VM after rollback finished.

  * vm start/stop: cleanup passed-through pci devices in more situations

  * fix #3593: allow one to configure task set affinity for VMs

  * fix #4324: USB: use qemu-xhci for machine versions >= 7.1

  * usb: increase max USB devices from 5 to 14 for modern 7.1 machine
    and OS versions (Linux 2.6+ annd Windows 8+)

  * fix #4201: delete cloud-init disk on rollback

  * net devs: register vNIC MAC-Address manually to FDB on start/resume if
    bridge has learning disabled

 -- Proxmox Support Team <support@proxmox.com>  Sun, 13 Nov 2022 15:46:18 +0100

qemu-server (7.2-6) bullseye; urgency=medium

  * schema: move 'pve-targetstorage' to pve-common

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Nov 2022 16:22:50 +0100

qemu-server (7.2-5) bullseye; urgency=medium

  * qmp client: increase guest fstrim timeout to 10 minutes

  * fix #3577: prevent suspension for VMs with pci passthrough

  * cpu config: map deprecated IceLake-Client CPU type to IceLake-Server

  * snapshot: save VM state: propagate error from QEMU

  * api: create disks: avoid adding secondary cloud-init drives

  * vzdump: TPM state: escape drive string

  * qmp client: increase default fallback timeout to 5s

  * fix regex matching network devices in qm cleanup so that vNICs with double
    digit IDs are covered too

  * qmeventd: rework 'forced_cleanup' handling and set timeout to 60s

  * qmeventd: send QMP 'quit' command instead of SIGTERM

  * vzdump: set max-workers QMP option when specified and supported

  * fix #4099: disable io_uring for virtual disks on CIFS storages for now

  * qm: move VM-disk related commands to own command group, keep old ones
    around for backward compatibility

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Nov 2022 16:15:16 +0100

qemu-server (7.2-4) bullseye; urgency=medium

  * fix #3754: encode JSON as utf8 for CLI

  * cpuconfig: add amd epyc milan model

  * fix #4115: enable option to name QEMU threads after their main purpose

  * fix #4119: give namespace parameter to live-restore

  * automatically add 'uuid' parameter when passing through NVIDIA vGPU

  * vzdump/pbs: die with missing, but configured encryption key

  * vzdump/pbs: die with missing, but configured master key

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Aug 2022 13:59:20 +0200

qemu-server (7.2-3) bullseye; urgency=medium

  * support pbs namespaces

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 May 2022 15:14:39 +0200

qemu-server (7.2-2) bullseye; urgency=medium

  * api: reassign disk: drop moved disk from boot order

  * explicitly check some prerequisites for virtio-gl display

 -- Proxmox Support Team <support@proxmox.com>  Mon, 02 May 2022 17:26:16 +0200

qemu-server (7.2-1) bullseye; urgency=medium

  * migrate: add log for guest fstrim and make a failure noticable

  * migrate: resume initially running VM when failing after convergence

  * parse vm config: remove "\s*" from multi-line comment regex

  * memory: enable balloon free-page-reporting for auto-memory reclaim

  * enable spice also for virtio-gl and virtio-gpu displays and report so in
    status API

  * api: create: allow overriding non-disk options during restore

  * fix #3861: migrate: fix live migration when cloud-init changes storage

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Apr 2022 18:35:22 +0200

qemu-server (7.1-5) bullseye; urgency=medium

  * avoid writing the config if there are no pending changes to apply

  * fix #3792: cloudinit: use of uninitialized value

  * pci: allow override of PCI vendor/device ids

  * drive mirror monitor: warn when suspend/resume/freeze/thaw calls fail

  * update config: allow setting boot-order and dev in one go

  * migrate: move tunnel-helpers to pve-guest-common

  * fix #3683: agent file-write: enable user to encode the content themselves

  * cpu units: lower minimum for accessing full cgroupv2 range

  * fix #3845: also clamp cpu units to cgroup dependent valid range on hotplug

  * clone disk: force raw format for TPM state

  * fix #3886: QEMU restore: verify storage allows images before writing

  * fix #3733: bump the timeout used to wait that a for backup started VM is
    fully stopped (i.e., it's "$vmid.scope vanished) to 20 seconds after the
    backup has finished to

  * qmp client: increase timeout for thaw to better accommodate the QGA running
    in Windows VMs

  * api: vm start: 'force-cpu' is for internal migration use only, mark as
    such

  * device unplug: verify that unplugging SCSI disk completed before
    continuing with remaining unplug work.

  * clone disk: remove ancient check for min QEMU version 2.7

  * clone disk: pass in efi vars size rather than config

  * clone disk: allow cloning from an unused or unreferenced disk

  * parse ovf: untaint path when getting the file's size info

  * image convert: allow block device as source

  * fix #3424: api: snapshot delete: wait for active replication

  * PCI: allow longer pci domains

  * fix #3957: spell 'occurred' correctly

  * clone disk: also clone EFI disk from snapshot

  * api: add endpoint for parsing .ovf files

  * api: support VM disk import

  * migrate: keep VM paused after migration if it was before

  * vga: add virtio-gl display type for VIRGL

  * restore: cleanup oldconf: also clean up snapshots from kept volumes

  * restore: also deactivate/destroy cloud-init disk upon error

 -- Proxmox Support Team <support@proxmox.com>  Mon, 25 Apr 2022 20:15:59 +0200

qemu-server (7.1-4) bullseye; urgency=medium

  * migrate: send updated TPM state volume ID to target node on local-storage
    migration

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Nov 2021 17:07:13 +0100

qemu-server (7.1-3) bullseye; urgency=medium

  * replication: do not setup NBD server on VM migrate for the TPM state,
    QEMU cannot access it directly and we already migrate it via the non-QEMU
    storage migration anyway.

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Nov 2021 14:04:45 +0100

qemu-server (7.1-2) bullseye; urgency=medium

  * cfg2cmd: disable SMM when display=none and SeaBIOS is both used

  * pci: do not reserve pci-ids for mediated devices, already handled by sysfs
    anyway

  * exclude efidisk and tpmstate for boot disk selection heuristic

 -- Proxmox Support Team <support@proxmox.com>  Mon, 15 Nov 2021 16:59:23 +0100

qemu-server (7.0-19) bullseye; urgency=medium

  * rollback: improve interaction with snapshot replication

  * cli: qm: rename 'move_disk' command to 'move-disk' with an alias for
    backward compatibility

  * pi: move-disk: add possibility to reassign a disk to another VM

  * turn SMM off when SeaBIOS and a serial-display are used in combination to
    avoid a possible boot loop

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Nov 2021 12:49:10 +0100

qemu-server (7.0-18) bullseye; urgency=medium

  * use non SMM ovmf code file for i440fx machines

  * fix hot-unplugging (removing) a cpulimit on a running VM

  * vm start: only print tpm-related message if there is an actual instance

  * vzdump: increase timeout for QMP 'cont' command after backup started

  * drives: expose readonly flag for SCSI/VirtIO drives as 'ro' property

  * qemu-agent: allow hotplug of the 'fstrim cloned disk' option

  * fix #2429: allow to specify cloud-init vendor snippet via 'cicustom'

  * config: add new meta property with the VM creation time

  * config: meta: also save the QEMU version installed during creation

  * cfg2cmd: switch off ACPI hotplug on bridges for q35 VMs with linux as
    ostype to avoid changes in network interface naming due to systemd's
    predicatble naming scheme

 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Nov 2021 15:29:55 +0100

qemu-server (7.0-17) bullseye; urgency=medium

  * fix #3258: block vm start when a PCI(e) device is already in use

  * snapshot: fix TPM state with RBD

  * swtpm: wait for PID file to appear before continuing with VM start

  * OS type: add entry for Windows 11/Server 2022

 -- Proxmox Support Team <support@proxmox.com>  Thu, 21 Oct 2021 11:57:09 +0200

qemu-server (7.0-16) bullseye; urgency=medium

  * ovmf: support secure boot enabled code images

  * ovmf: support provisioning an EFI vars template with secureboot by default
    on and distribution + Microsofts secure-boot key pre-enrolled

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Oct 2021 20:22:18 +0200

qemu-server (7.0-15) bullseye; urgency=medium

  * api: return task-worker UPID in create template endpoint

  * api: destroy VM: remove pending volumes as well

  * fix #3075: add TPM v1.2 and v2.0 support via swtpm~

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Oct 2021 07:24:52 +0200

qemu-server (7.0-14) bullseye; urgency=medium

  * fix #3581: pass size via argument for memory-backend-ram QMP call

  * fix #3608: improve removal of the underlying SCSI controller when removing
    last drive on it

  * migrate: do not suggest that we map shared storages to avoid that
    subsequent checks could result in false negatives.

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Sep 2021 09:31:06 +0200

qemu-server (7.0-13) bullseye; urgency=medium

  * fix bootorder regression with implicit default order

 -- Proxmox Support Team <support@proxmox.com>  Thu, 5 Aug 2021 14:03:14 +0200

qemu-server (7.0-12) bullseye; urgency=medium

  * fix #3371: import ovf: allow the use of dots in the VM name

  * bootorder: fix double entry on cdrom edit

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Jul 2021 16:53:44 +0200

qemu-server (7.0-11) bullseye; urgency=medium

  * nic: support the intel e1000e model

  * lvm: avoid the use of io_uring for now

  * live-restore: fail early if target storage doesn't exist

  * api: always add new CD drives to bootorder

  * fix #2563: allow live migration with local cloud-init disk

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Jul 2021 11:08:48 +0200

qemu-server (7.0-10) bullseye; urgency=medium

  * avoid using io_uring for drives backed by LVM and configured for write-back
    or write-through cache

 -- Proxmox Support Team <support@proxmox.com>  Wed, 07 Jul 2021 14:56:34 +0200

qemu-server (7.0-9) bullseye; urgency=medium

  * cpu weight: always clamp value to lower maximum for cgroup v2 and fix
    defaults (v1 -> 1024, v2 -> 100)

  * api: improve error handling when applying pending config changes

 -- Proxmox Support Team <support@proxmox.com>  Wed, 07 Jul 2021 12:02:13 +0200

qemu-server (7.0-7) bullseye; urgency=medium

  * improve #3329: ensure write-back is used over write-around for EFI disk,
    as OVMF profits a lot from cached writes due to its frequent
    read-modify-write operations

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Jul 2021 20:49:50 +0200

qemu-server (7.0-6) bullseye; urgency=medium

  * live-restore: preload efidisk before starting VM

  * For now do not use io_uring for drives backed by Ceph RBD, with KRBD and
    write-back or write-through cache enabled, as in that case some polling/IO
    may hang in QEMU 6.0.

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Jul 2021 09:45:06 +0200

qemu-server (7.0-5) bullseye; urgency=medium

  * don't default to O_DIRECT (cache=none) on btrfs without nocow

  * fix #2175: api: update VM: check old drive-config for permissions too to
    ensure a valid transition when limited to CDROM changes.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 24 Jun 2021 18:58:19 +0200

qemu-server (7.0-4) bullseye; urgency=medium

  * enable io-uring support by default when running QEMU 6.0 or newer

  * VM start: always check if storages of volumes support correct content-type

  * use KillMode 'process' for systemd scope to cope with depreacation of
    KillMode=none

  * cli, api: handle new warnings task status

  * improve backup of templates with EFI disks and with SATA and IDE
    disk controllers in use

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Jun 2021 12:57:27 +0200

qemu-server (7.0-3) bullseye; urgency=medium

  * vzdump: add master key support

  * vzdump: drop legacy fallback logging for dirty-bitmap

  * vm destroy: do not remove unreferenced disks by default

  * fix #3329: turn on cache=writeback for efidisks on rbd

  * avoid setting LUN number for drives when the `pvscsi` controller is used,
    as that cannot handle multiple LUNs, increase the `scsi-id` instead

  * config: limit description/comment length to 8 KiB

  * migrate: enforce that image content type is available and configured on
    target storage

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Jun 2021 11:17:52 +0200

qemu-server (7.0-2) bullseye; urgency=medium

  * api: clone: sort vm disks to keep numbers consistent

  * api: VM status: make template property optional in return object

  * add compatibility for QEMU 6.0

  * destroy VM: always remove (referenced) VM state volumes

  * destroy VM: also check if unused volumes are base images

  * live-restore: log more similar to regular restore, outputting the user the
    PBS repo/snapshot and target for each drive.

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 May 2021 12:46:36 +0200

qemu-server (7.0-1) pve; urgency=medium

  * re-build for Proxmox VE 7 / Debian Bullseye

 -- Proxmox Support Team <support@proxmox.com>  Thu, 13 May 2021 19:11:18 +0200

qemu-server (6.4-2) pve; urgency=medium

  * fix #2862: allow sata/ide template backups

  * migration: improve speed-limits for >1G connections again

  * fix getting bootdisk size for new bootorder config scheme

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Apr 2021 16:16:04 +0200

qemu-server (6.4-1) pve; urgency=medium

  * fix the +pveN versioned machine types when PXE is used

  * migration: avoid re-scanning all volumes

  * migration: do not always set default speed limit if none is configured

  * migration: rework logging to more humand friendly format, avoiding to much
    output noise

  * qmrestore: add live-restore option for CLI tool

  * live-restore: hold 'create' lock during operation

  * live-restore: don't remove VM on error, to allow an VM user to save any new
    data before retrying the operation.

  * fix #3369: auto-start vm after failed stopmode backup

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Apr 2021 16:26:54 +0200

qemu-server (6.3-11) pve; urgency=medium

  * enable live-restore tech preview for Proxmox Backup Server hosted backup
    snapshots.

  * drive mirror: rework periodic status reporting to be human friendlier

  * drive mirror: stop logging progress for a disk once it got ready

  * image convert: use human-readable units in progress report

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Apr 2021 18:32:06 +0200

qemu-server (6.3-10) pve; urgency=medium

  * increase timeout for block (disk) resize QMP command

  * fix #3314: cloudinit: IPv6 requires type 'static6'

  * fix #2670: cloudinit: enable SLAAC again now that client support is there

 -- Proxmox Support Team <support@proxmox.com>  Tue, 30 Mar 2021 18:40:58 +0200

qemu-server (6.3-9) pve; urgency=medium

  * restore vma: fix applying storage-specific bandwidth limit

  * snapshot: set migration caps before savevm-start

  * vzdump: improve error logging for query-proxmox-support to avoid
    false-positives

 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Mar 2021 09:47:27 +0100

qemu-server (6.3-8) pve; urgency=medium

  * qm status: sort hash keys on verbose output

  * improve windows VM version pinning on VM creation

 -- Proxmox Support Team <support@proxmox.com>  Fri, 12 Mar 2021 10:01:09 +0100

qemu-server (6.3-7) pve; urgency=medium

  * vzdump: increase Proxmox Backup Server backup QMP command timeout

 -- Proxmox Support Team <support@proxmox.com>  Tue, 09 Mar 2021 08:21:43 +0100

qemu-server (6.3-6) pve; urgency=medium

  * fix #3324: clone disk: use larger blocksize for EFI disk

  * fix #3301: status: add currently running machine and QEMU version to full
    status

  * api: add endpoint to list all available QEMU machine type and version
    tuples

  * always pin virtual machines with Windows as ostype to a fixed QEMU machine
    version by default. For existing VMs with Windows based OS-type use the 5.1
    machine version (or the next available one, for older QEMU versions) to
    improve stabillity of the hardware layout from Windows point of view. Linux
    and other OS types are not as sensitive to those changes, so keep the
    default to the currently latest available machine versions for non-Windows
    VMs.

  * update VM: check for CDROM not just drive permissions when removing a
    device

 -- Proxmox Support Team <support@proxmox.com>  Fri, 05 Mar 2021 21:42:59 +0100

qemu-server (6.3-5) pve; urgency=medium

  * cloudinit: add opennebula config format

  * cloudinit: remove pending delete on online regenerate image

  * snapshot/save-vm: periodically print progress and show information about
    drives during snapshot

  * qmeventd: explicitly close() pidfds

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Feb 2021 18:05:18 +0100

qemu-server (6.3-4) pve; urgency=medium

  * audio: add the "none" dummy audio backend

  * fix drive-mirror completion with cloudinit

  * vm destroy: allow opt-out of purging unreferenced disks

  * fix #2788: do not resume vms after backup if they were paused before

  * anchor CPU flag regex to avoid arbitrary flag suffixes

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Jan 2021 17:21:07 +0100

qemu-server (6.3-3) pve; urgency=medium

  * api: adapt VM destroy and purge description

  * clone disk: fix regression in offline clone of efidisk

  * cloudinit: fix cloning/restoring of cloudinit disks in raw format

 -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Dec 2020 16:33:01 +0100

qemu-server (6.3-2) pve; urgency=medium

  * PBS: use improved method to assemble repository url, fixing issues when
    using IPv6 or non-default ports

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Dec 2020 18:06:25 +0100

qemu-server (6.3-1) pve; urgency=medium

  * deactivate volumes after storage migrate

  * print query-proxmox-support result in 'full' status

  * clone disk: avoid errors after disk was moved by QEMU

  * replace cgroups_write by cgroup change_cpu_shares && change_cpu_quota

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Nov 2020 14:30:50 +0100

qemu-server (6.2-20) pve; urgency=medium

  * don't migrate replicated VM whose replication job is marked for
    removal

  * ensure qmeventd service is stopped after pve-guests and pve-ha-lrm service
    on shutdown

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Nov 2020 17:08:45 +0100

qemu-server (6.2-19) pve; urgency=medium

  * fix #3113: unbreak drive hotplug

  * qmeventd: add handling for -no-shutdown QEMU instances, to avoid errors if
    the guest OS shuts down the VM during a backup job.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 05 Nov 2020 13:37:00 +0100

qemu-server (6.2-18) pve; urgency=medium

  * migrate: tell QEMU to enable dirty-bitmap migration, if supported

  * partially fix #3056: always try to cancel backups when failed to start job

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Oct 2020 18:23:13 +0100

qemu-server (6.2-17) pve; urgency=medium

  * bootorder: don't print empty 'order=' property

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Oct 2020 16:08:57 +0200

qemu-server (6.2-16) pve; urgency=medium

  * fix #3010: add 'bootorder' parameter for better control of boot devices

  * fix VM clone from snapshot with cloudinit disk

  * fix various possible issues by avoiding conditionally declared variables
    altogether

  * PCI passthrough: fix setting VGA to 'none' when marking passed-through
    device as 'Primary GPU'

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Oct 2020 15:51:48 +0200

qemu-server (6.2-15) pve; urgency=medium

  * fix #2570: add 'keephugepages' config property

  * vzdump: log 'finishing' state for Proxmox Backup Server jobs, to avoid
    suggesting that the backup is stuck at 100%. This can happen when the
    validation and mark of pre-existing chunks needs a bit longer.

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Sep 2020 17:44:28 +0200

qemu-server (6.2-14) pve; urgency=medium

  * vzdump: allow bandwidth limit also PBS backup

  * avoid a warning when checking the VMs bios

  * fix #2862: properly backup (all) VM templates

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Aug 2020 19:33:54 +0200

qemu-server (6.2-13) pve; urgency=medium

  * fix use of bandwidth limits with offline storage migrate

  * allow one to add CPU features with a dot, like "+sse4.2", correctly

  * vzdump: improve logging output and report dirty bitmap state for each disk

  * vzdump: display actually uploaded chunks as 'write' speed to conform more
    closely with the actual network transmission line-speed.

  * fix #2749: vga: disable the display EDID information for the combination of
    Windows SeaBIOS and VGA guests to avoid a reduced list of possible screen
    resolutions. (Windows may cache the list of possible resolutions,
    uninstalling 'Microsoft Basic Display Adapter' and rebooting may then help)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Aug 2020 11:42:47 +0200

qemu-server (6.2-11) pve; urgency=medium

  * fix #2857: restore: pass keyfile to pbs-restore

  * fix #2728: die/warn if target is not a replication target when
    live-migrating

 -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Jul 2020 08:13:29 +0200

qemu-server (6.2-10) pve; urgency=medium

  * pass-through: fix mdev cmdline generation

  * docs: add man page cpu-models.conf(5)

  * start: set resume parameter for VM start anytime there is a 'vmstate' in
    the config, not just when it has the 'suspend' lock

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Jul 2020 13:37:37 +0200

qemu-server (6.2-9) pve; urgency=medium

  * support encrypted pbs backups

 -- Proxmox Support Team <support@proxmox.com>  Fri, 10 Jul 2020 14:23:46 +0200

qemu-server (6.2-8) pve; urgency=medium

  * backup: detect PBS features and use only supported

  * fix #2671: include CPU format in man page again

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jul 2020 15:14:36 +0200

qemu-server (6.2-6) pve; urgency=medium

  * vzdump: fix variable redeclaration warning

  * make backup log more friendlier to read for humans

 -- Proxmox Support Team <support@proxmox.com>  Tue, 07 Jul 2020 19:00:09 +0200

qemu-server (6.2-4) pve; urgency=medium

  * fix #2787: properly parse vga for vncproxy

  * vncproxy: allow to request a generated VNC password

  * fix #2794: allow legacy IGD passthrough

  * avoid backup command timeout with PBS

  * fix #2741: add VM.Config.Cloudinit permission

  * enable dirty-bitmap incremental backups for PBS

 -- Proxmox Support Team <support@proxmox.com>  Tue, 30 Jun 2020 11:33:35 +0200

qemu-server (6.2-3) pve; urgency=medium

  * fix #2748: make order of cloudinit interfaces consistent

  * fix #2774: add early check for non-managed volumes

  * allow to force MTU for a VM net-device

 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Jun 2020 11:17:09 +0200

qemu-server (6.2-2) pve; urgency=medium

  * adapt net-device hotplug to more strict QMP schema of QEMU 5.0

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 May 2020 13:00:18 +0200

qemu-server (6.2-1) pve; urgency=medium

  * qmrestore: fix VMA restore from STDIN

 -- Proxmox Support Team <support@proxmox.com>  Thu, 07 May 2020 21:51:01 +0200

qemu-server (6.1-20) pve; urgency=medium

  * cfg2cmd: fix uninitialized value warning on OVMF w/o efidisk

  * vzdump: fix backup of templates with stdout as output

  * cfg2cmd: set audiodev parameter only on qemu >= 4.2

  * api: allow listing custom and default CPU models

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 May 2020 17:16:56 +0200

qemu-server (6.1-19) pve; urgency=medium

  * clone: use new config_lock_shared

 -- Proxmox Support Team <support@proxmox.com>  Tue, 5 May 2020 11:22:04 +0200

qemu-server (6.1-18) pve; urgency=medium

  * vzdump: assemble: fix skipping all pending and snapshot config entries

  * api/destroy: repeat early checks after locking

  * migrate: skip rescan for efidisk and shared volumes

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 May 2020 17:36:40 +0200

qemu-server (6.1-17) pve; urgency=medium

  * backup: never try to freeze in stop mode backup

  * Fix #2124: Add support for zstd

 -- Proxmox Support Team <support@proxmox.com>  Mon, 4 May 2020 14:11:50 +0200

qemu-server (6.1-16) pve; urgency=medium

  * spice audio: improve compatibility with QEMU versions newer than 4.2

  * migrate: workaround issues with format switch on storage live migration

  * fix live migration with replicated unused volumes

  * importovf: improve compatibility with OVF files without default namespaces

  * backup restore: use correct storage for format check for cloudinit drives

  * handle stopping the storage migration NBD server better

 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 Apr 2020 16:23:24 +0200

qemu-server (6.1-14) pve; urgency=medium

  * Use foreach_volume instead of foreach_drive

  * Use new storage_migrate interface

  * migrate: update config with changed volume IDs

  * migrate: allow specifying targetstorage for offline migration

  * migrate: sync_disks: use allow_rename to avoid collisions on the target
    storage

  * migrate: sync_disks: log output of storage_migrate

  * migrate: also cleanup disks migrated by storage_migrate in case of failure

 -- Proxmox Support Team <support@proxmox.com>  Thu, 9 Apr 2020 08:56:44 +0200

qemu-server (6.1-13) pve; urgency=medium

  * rescan: fix call to foreach_volume

  * migration: fix downtime limit auto-increase

  * migrate: allow arbitrary source->target storage maps

  * migrate: always check storage permissions and content type

  * Include full KVM/QEMU "-cpu" parameter with live-migration and
    snapshots/suspend to allow supporting custom CPU models

  * fix #2318: allow phys-bits CPU setting

  * allow custom CPU models

  * config: harmonize bridge pattern to match the same limits of containers

  * cpu config: add upcoming EPYC-Rome CPU type

 -- Proxmox Support Team <support@proxmox.com>  Wed, 08 Apr 2020 17:08:13 +0200

qemu-server (6.1-12) pve; urgency=medium

  * CPUConfig: fix module load when pmxcfs is unavailable

  * migrate: fix replication false-positives

  * migrate: cleanup disk/bitmaps if 'qm start' failed

  * migration with targetstorage: check if target storage supports images

  * fix efidisks on storages with minimum sizes bigger than OVMF_VARS.fd

  * Implement volume-related helpers and use new foreach_volume

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Mar 2020 10:00:13 +0200

qemu-server (6.1-11) pve; urgency=medium

  * vzdump: fix regression in backups for specific storage

  * custom CPU models: add initial parser and verifier

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Mar 2020 09:00:24 +0100

qemu-server (6.1-10) pve; urgency=medium

  * version_guard: early out when major/minor version is high enough

  * drive-mirror: add support for incremental sync

  * migrate: add replication info to disk overview

  * migrate: add live-migration of replicated disks

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Mar 2020 15:16:21 +0100

qemu-server (6.1-8) pve; urgency=medium

  * cloudinit: make genisoimage quieter, only output errors

  * Append newline to all QGA commands for compatibility with non standard
    conforming Apple based guest agent implementation

  * add experimental support for proxmox backup server

  * fix #2580: api/delete: drop VM from HA resources if purge is set

  * improve drive mirror completion over NBD during migration

  * add secured unix socket support for NBD storage migration

  * Disable memory hotplug for custom NUMA topologies and die on misaligned
    memory for hotplug

 -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Mar 2020 11:11:31 +0100

qemu-server (6.1-7) pve; urgency=medium

  * vzdump: always exclude efidisks from backups of machines currently not set
    to use OVMF (UEFI)

  * Simplify QEMU version check and require at least 3.0+

  * Align size to 1 KiB bytes before doing 'qmp block_resize'

  * fix #2611: use correct operation when calculating the migration bandwidth
    limit

  * fix #2612: allow input-data in guest exec and make command optional

  * cpu models: add icelake-server and icelake-client

  * already add models from future QEMU 4.2 release

  * fix #2264: allow one to add a virtio-rng device for improved entropy
    bandwidth in a VM

  * update_disksize: also update disk size if there was no old size at all

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Mar 2020 19:12:16 +0100

qemu-server (6.1-6) pve; urgency=medium

  * allow reading snapshot config for users with VM.Audit on a guest

  * fix #2566: increase scsi limit to 31

  * fix #2578: check if $target is provided in clone

  * update QMP commands to reflect (future) depreacations and changes in QEMU

  * resize volume: always request new size from storage after resizing

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Feb 2020 06:40:43 +0100

qemu-server (6.1-5) pve; urgency=medium

  * Add QEMU CPU flag querying helpers

  * hotplug_pending: remove redundant write/load config calls

  * api: vm clone: unlink zombie target VM and firewall config at end of error
    cleanup

  * add timeout parameter to vm start API/CLI endpoint

  * fix #2070: vm_start: for a migrating VM, use current format of disk if
    possible

  * hotplug_pending: make 'ssd' option non-hotpluggable, it cannot be changed
    live on a plugged disk.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Jan 2020 10:27:33 +0100

qemu-server (6.1-4) pve; urgency=medium

  * check if QEMU version is recent enough for requested machine type

  * suspend to disk: check and enforce more strict permissions

  * update disk size before local disk migration

  * hide very long commandline on vm_start/migrate failure

  * fix #2493: show QEMU errors in migration log

  * api/restore: do not trigger autostart-after-restored task from locked
    context

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Dec 2019 16:03:25 +0100

qemu-server (6.1-3) pve; urgency=medium

  * create efidisk: poll the real size after volume creation, as some storages
    need to create bigger volumes as requested, to cope with their internal
    alignment requirements.

  * fix #2469: fix qemu-img convert src_format detection, wrongly reverted.

  * fix #2510: hostpci: always check if specified device exists

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Dec 2019 11:44:14 +0100

qemu-server (6.1-2) pve; urgency=medium

  * api: allow one to remove (hibernation) vmstate

  * vzdump: log QGA FS freeze/thaw tries in task log

  * skip efidisk0 in hotplug

 -- Proxmox Support Team <support@proxmox.com>  Sat, 30 Nov 2019 18:38:36 +0100

qemu-server (6.1-1) pve; urgency=medium

  * fix #2367: do not allow snapshot with name PENDING

  * fix #2469: fix qemu-img convert src_format detection

  * implement PVE Version addition for QEMU machine allowing to introduce new
    features while keeping migration compatibility more easily

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Nov 2019 13:06:21 +0100

qemu-server (6.0-17) pve; urgency=medium

  * PCI(e) pass-through: ensure we fallback to the previous default "0000"
    domain again.

 -- Proxmox Support Team <support@proxmox.com>  Sat, 23 Nov 2019 09:52:09 +0100

qemu-server (6.0-16) pve; urgency=medium

  * fix #2473: use of unitialized value

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Nov 2019 14:18:58 +0100

qemu-server (6.0-15) pve; urgency=medium

  * api/migration: fix autocomplete for targetstorage

  * add 'type' to guest agent format, allowing one to choose between VirtIO
    (default) and ISA

  * clone: pre-allocate cloud-init disk for destination

  * SPICE/QXL: tell Linux VMs that they can add up to 4 display when running
    with qemu 4.1 or newer

  * add support to tell showcmd helper to assume a specific forced machine
    version when assembling a command

  * refactor QemuServer to avoid cyclic module dependencies

  * fix #2436: pci: do not hardcode pci domain to 0000

  * add 'tags' config option for adding meta information to a VM

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Nov 2019 19:41:01 +0100

qemu-server (6.0-14) pve; urgency=medium

  * use PVE::DataCenterConfig, use PVE::SSHInfo, use PVE::RRD for RRD data

  * refactor migration IP retrieval

  * add missing packages to (build-)dependencies

  * fix #2457: ga: set-user-password: increase maxLength of password

  * fix restoring old VM backups made with Promxox VE earlier than 2.3

  * improve test mocking

 -- Proxmox Support Team <support@proxmox.com>  Mon, 18 Nov 2019 12:12:03 +0100

qemu-server (6.0-13) pve; urgency=medium

  * fix #2434: extend machine regex to support stable release machine updates

  * prepare to fix #2408, #2355, #2380: use scsi-hd backend for iSCSI as well

  * fix deleting pending changes for not yet existing options

  * improve hugepage memory size detection

  * avoid a race for VMID reservation when importing an OVF manifest to a new
    VM

  * cleanup importidsk CLI command, and say to which exact disk we imported

  * add simple runtime heuristic for IOThread backup support, to ensure the VM
    to backup was started with a recent QEMU version.

  * QMPClient: ensure QMP connection is also closed in certain edge cases

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Oct 2019 17:43:41 +0100

qemu-server (6.0-12) pve; urgency=medium

  * fix regression from 6.0-10 with vmstate restore on RBD

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Oct 2019 16:31:46 +0200

qemu-server (6.0-11) pve; urgency=medium

  * fix #1071: VMs with IOThread enabled disks can now be backed up

  * fix regression from 6.0-10 with snapshot restore and statefile

  * fix regression with from 6.0-10 where forced was always assumed to be true
    for applying pending changes

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Oct 2019 12:50:18 +0200

qemu-server (6.0-10) pve; urgency=medium

  * fix #2344: ignore cloudinit in replication check

  * fix #1291: add option purge for vm_destroy api call

  * increase code re-use with pve-container for pending changes in
    configuration

  * fix #2412: only do the final configuration destroy after all the VMs
    resources, and references in other configurations like Firewall or resource
    pools was successfully cleaned up

  * fix #2171: ensure that non filesystem based statefiles get activated on VM
    start

  * fix #2395: improve QEMU image converter to cope better with pure file based
    sources and iSCSI source and destinations

  * fix #2402: allow 1GB hugepages if 2MB is unavailable

  * qemu 4.0 : add Cascadelake-Server and KnightsMill Intel CPU models

  * fix #2217: don't copy cloudinit disk on clone

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Oct 2019 22:04:50 +0200

qemu-server (6.0-9) pve; urgency=medium

  * fix issue where a SPICE remote viewer was disconnected during live migration

  * Add VM reboot API/CLI integration, allowing to reboot a VM and applying any
    pending changes in-between

  * CPU flags: allow one to add aes flag

  * fix #2263: die on live migration with local cloudinit disk

  * fix #2041, #2272: Add Spice enhancements

  * Add support for more (up to 16) PCI(e) devices

  * usb: Allow one to make SPICE USB ports USB3 capabile

  * allow one to use USB3 for SPICE USB ports with VMs started already with
    QEMU version 4.0.0, as live-migrations were not possible with this previous
    unsupported setup anyway. Live-snapshots from VMs with a SPICE USB device
    which was manually set (wasn't possible over Webinterface) to USB3 with a
    machine version of 4.0.0, need to remove the "usb3" flag again from the
    snapshot config when restoring it.

  * rework kvm_user_version cache mechanism

  * api: deletion: check also pending values for serial/usb

  * migration api: explicitly clear "online" flag if VM is stopped to avoid
    issues with storage migrations which are handled different for stopped VMs

  * abort resize disk if current size could not be determined

  * fix #2382: delete cloudinit disk before restoring

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Sep 2019 12:01:58 +0200

qemu-server (6.0-7) pve; urgency=medium

  * ensure new SPICE audio device works also with 'q35' based VMs

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Jul 2019 15:13:35 +0200

qemu-server (6.0-6) pve; urgency=medium

  * Add SPICE audio device support

  * fix #2275: die on invalid sendkey

  * Make sometimes problematic 'hv-tlbflush' and 'hv-evmcs' CPU flags optional

 -- Proxmox Support Team <support@proxmox.com>  Tue, 23 Jul 2019 18:20:10 +0200

qemu-server (6.0-5) pve; urgency=medium

  * do not pass Proxmox VE internal startdate 'now' to QEMU, it does not
    understands it

  * use new pcie port hardware for 4.0 and newer q35 machine types

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Jul 2019 19:44:28 +0200

qemu-server (6.0-4) pve; urgency=medium

  * fix guest shutdown if agent is configured but no timeout was passed

  * cloudinit: set iso-level in genisoimage call

  * migrate pre-condition check: add size to volume attributes and handle
    storage not selected manually in storage config

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Jun 2019 20:35:09 +0200

qemu-server (6.0-3) pve; urgency=medium

  * do not add evmcs HyperV enlightment at all for now due to incompatibillity
    with AMD based hosts

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Jun 2019 14:33:01 +0200

qemu-server (6.0-2) pve; urgency=medium

  * add migration precondition api endpoint

  * wait for possible left over VM scopes to be gone through dbus based helper
    on VM start

  * fix #2244: Allow timeout for guest-agent shutdown

  * fix #2083: Add hv_tlbflush, hv_ipi, hv_evmcs enlightenments

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Jun 2019 17:46:51 +0200

qemu-server (6.0-1) pve; urgency=medium

  * SMBIOS: followup: allow now 512 characters for full format string

  * fix #2190: Base64 encode SMBIOS value strings in order to allow more
    characters

  * allow one to add md-clear cpu flag

  * add qm command for cloudinit config dump

  * drop vnc x509 param, deprecated in 2.5 removed in 4.0

  * Fix #1999: cli: listsnapshot: handle multiple roots and mark orphaned as
    root

  * drop references to un-maintained sheepdog plugin

  * vm_resume: correctly honor $nocheck

 -- Proxmox Support Team <support@proxmox.com>  Fri, 14 Jun 2019 20:59:07 +0200

qemu-server (6.0-0+1) pve; urgency=medium

  * rebuild for Debian Buster / PVE 6.0

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 May 2019 19:12:34 +0200

qemu-server (5.0-51) unstable; urgency=medium

  * fix #1811: allow non root user to edit serialX: socket entries

  * allow non root users to add spice usb port

  * fix #1829: do not ignore format parameter when creating cloudinit
    disk volume

  * fix: #1075: Restore VM template to VM and try to convert to template

  * fix #2173: use qemu-img to check cloudinit disk existence

  * cloudinit: use detected format in volume name parsing

 -- Proxmox Support Team <support@proxmox.com>  Tue, 30 Apr 2019 14:07:59 +0000

qemu-server (5.0-50) unstable; urgency=medium

  * fix #2100: ignore cloudinit drive on offline migration

  * honor bandwidth limits (bwlimit) for migrate, drive-mirror, clone
    and add to API calls

 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Apr 2019 16:22:10 +0200

qemu-server (5.0-49) unstable; urgency=medium

  * return config lock in vm status

  * move 'pve-snapshot-name' to common

 -- Proxmox Support Team <support@proxmox.com>  Thu, 21 Mar 2019 12:55:03 +0100

qemu-server (5.0-48) unstable; urgency=medium

  * cloud-init: allow custom network/user data files via snippets

  * fix #2120: use hosts initiator name with qemu-img

  * fix #2131: get correct device when deleting iothreads

  * config: NIC macaddr: enforce unicast MAC addresses

  * implement suspend to disk for running VMs over API and CLI

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Mar 2019 13:25:38 +0100

qemu-server (5.0-47) unstable; urgency=medium

  * fix #2043: always stop existing systemd scopes on VM start

  * use nr_hugepages from /proc/cmdline

  * fix #2101: cloudinit: IPv6 ending in : not parsed as a string

  * fix #1891: Add zsh command completion for qm and qmrestore

  * fix #2097: allow one to set and pass the WWN parameter for IDE, SATA and
    SCSI disks

  * allow one to add IVSHMEM device to a VM configuration

  * fix #2114: always set correct link status on VM network adapter hotplug

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 Mar 2019 10:11:00 +0100

qemu-server (5.0-46) unstable; urgency=medium

  * allow explicit hv-vendor-id

  * allow explicit set vga with gpu passthrough

  * fix #1924: add snapshot parameter

  * allow to add pre- start/stop hook scripts

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Feb 2019 13:04:19 +0100

qemu-server (5.0-45) unstable; urgency=medium

  * fix #2003: give qm terminal a terminal over ssh

  * migrate: fix local disk migration with online VMs

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Jan 2019 10:42:03 +0100

qemu-server (5.0-44) unstable; urgency=medium

  * fix #1013 : migrate : sync_disk : --targetstorage with offline disk

  * add Windows 7 PCIe quirk for adding 'hostpci' devices

  * fix #2032: check that type is set before assembling a VGA device

  * add configuration to command regression tests

  * allow 'none' as VGA option

  * fix #1267: move args to the end of qemu commandline

  * clone_disk : cloudinit drive: don't clone snapshot name (snapname)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Dec 2018 10:17:47 +0100

qemu-server (5.0-43) unstable; urgency=medium

  * usb: fix check if machine type is q35

  * qm cleanup: exit silently if VM config does not belong to node
    anymore

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Nov 2018 12:57:49 +0100

qemu-server (5.0-42) unstable; urgency=medium

  * add mediated devices support

  * use improved lspci

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Nov 2018 11:22:04 +0100

qemu-server (5.0-41) unstable; urgency=medium

  * fix #1959: add fallback for auto previously set by SLAAC

  * create_vm: don't add vmgenid for ARM machines by default

  * use qmeventd to execute qm cleanup

  * QemuServer: remove PCI sysfs helpers

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Nov 2018 14:38:42 +0100

qemu-server (5.0-40) unstable; urgency=medium

  * correctly check display vga type

 -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Nov 2018 17:27:53 +0100

qemu-server (5.0-39) unstable; urgency=medium

  * Add `ssd` property to IDE, SATA, and SCSI drives

  * fix #1952: make vga memory configurable

  * fix #1969: increase max unused disks

 -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Nov 2018 16:23:26 +0100

qemu-server (5.0-38) unstable; urgency=medium

  * add second qmp socket when running qemu >= 2.12 for pending event/reboot
    changes

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Oct 2018 12:28:49 +0200

qemu-server (5.0-37) unstable; urgency=medium

  * add virtio to the list of valid gpu types

  * lower qemu requirement for hv_synic and hv_stimer to 2.12

  * prepare for deprecated functionality in qemu 3.0

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Oct 2018 14:53:04 +0200

qemu-server (5.0-36) unstable; urgency=medium

  * fix #1908: add VM Generation ID (vmgenid) device by default on new VMs and
    allow to set on existing ones

  * fix version check in qemu_machine_feature_enabled

  * use qemu's internal blockdev-snapshot functions to avoid some issues with
    snapshots on qcow2 files

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Sep 2018 11:14:32 +0200

qemu-server (5.0-35) unstable; urgency=medium

  * add hv_synic and hv_stimer HyperV Enlightment flags on QEMU 3.0 and later

  * improve setting QEMU machine type on snapshot and rollback

 -- Proxmox Support Team <support@proxmox.com>  Mon, 17 Sep 2018 15:29:18 +0200

qemu-server (5.0-34) unstable; urgency=medium

  * fix #1865: CloudInit doesn't add IPv6

  * allow to add ibpb, ssbd, virt-ssbd, amd-ssbd, amd-no-ssb and pdpe1gb CPU flags

  * clone: improve message for ignoring pending changes

 -- Proxmox Support Team <support@proxmox.com>  Thu, 13 Sep 2018 11:37:24 +0200

qemu-server (5.0-33) unstable; urgency=medium

  * fix #1242: allow one to setup an automatic QEMU guest agent fstrim
    command after cloning or moving a disk live

  * define return properties for vmstatus API call

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Aug 2018 14:40:46 +0200

qemu-server (5.0-32) unstable; urgency=medium

  * api/agent: do not dereference parameter hash before passing to
    agent_cmd method

  * api/agent: import check_agent_error method

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Jul 2018 10:55:42 +0200

qemu-server (5.0-31) unstable; urgency=medium

  * fix #1717: delete snapshot when vm running and drive not attached

  * fix qemu agent commands: add missing import of 'agent_cmd' method

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Jul 2018 10:24:27 +0200

qemu-server (5.0-30) unstable; urgency=medium

  * Fix SPICE multi-monitor mode on VMs using q35 machine type

  * extend QEMU guest agent API with file read/write, setting VM user password
    and executing arbitrary commands in VM

  * add guest command group to qm CLI tool

  * add 'dryrun' to qm rescan, which only list changes but does not actually
    saves them

  * add a workaround for bug #1650: add content type filter to rescan

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Jul 2018 11:39:01 +0200

qemu-server (5.0-29) unstable; urgency=medium

  * reserve new VM config with create lock early

  * api: allow auto vm start after create finished

  * use 'system_wakeup' to resume VMs suspended by their guest OS

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jun 2018 12:11:29 +0200

qemu-server (5.0-28) unstable; urgency=medium

  * cloud-init: improve handling of network settings for broken
    versions (e.g., the one currently used by CentOS 7)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jun 2018 12:48:42 +0200

qemu-server (5.0-27) unstable; urgency=medium

  * qm agent: check if qga service is running

  * fix #1779: vzdump: ensure guest-fsfreeze-thaw is called on error

  * fix #1780: change datacenter.conf to datacenter.cfg in description

  * fix logic of deleting balloon config property

  * activate volume for cloudinit disk

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Jun 2018 15:24:14 +0200

qemu-server (5.0-26) unstable; urgency=medium

  * fix #1749: do not copy pending changes when cloning a vm

  * make q35 and virtio-scsi-single compatible

  * fix an issue where cleanup operations run as part of a VM's systemd scope

  * associate cloud-init options with with the VM.Config.Network permission

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 May 2018 14:04:26 +0200

qemu-server (5.0-25) unstable; urgency=medium

  * fix #1697: only check machine type for pxe

  * fix scsi hotplug issue with q35 machines

  * fix live migration with local disk issue with nbd

  * switch to new method of passing disk serials to qemu

  * qemu-img convert: use cache=none for ZFS to not fill up the ARC

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Apr 2018 15:11:58 +0200

qemu-server (5.0-24) unstable; urgency=medium

  * use pve-edk2-firmware for supporting OVMF

  * restore: implement rate limiting

  * stop passing default '-k' (keyboard) QEMU option from datacenter.cfg

  * create linked clones of templates by default

  * remove legacy vm_monitor_command

  * start: always stop an existing $vmid.scope

  * implement cloudinit support

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Mar 2018 09:24:08 +0100

qemu-server (5.0-23) unstable; urgency=medium

  * fix migrate cache size parameter for qemu 2.11

  * typo fixes in migrate task log

  * depend on pve-qemu-kvm >= 2.9.1-9

  * allow virtio-scsi+iothread controller hot-unplug

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Feb 2018 13:21:08 +0100

qemu-server (5.0-22) unstable; urgency=medium

  * fix #1664: nbd mirror: remove socat tunnel now that it is not required
    anymore to avoid a 30s inactivity timeout

  * fix #1569: add shared flag to disks

  * fix #1662: make the 'snapshot' disk parameter work again

  * correct 'snapshot' flag description

  * CPU types: add EPYC and EPYC-IBPB

  * forward returned errors from guest-agent commands

  * add new guest-agent commands and add commands as separate api calls

  * add agent flag to vm status api call

  * clone/restore: make the smbios UUID unique if --unique is used

  * add serial:1 to vm-status when config has a serial device configured

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Feb 2018 09:56:08 +0100

qemu-server (5.0-21) unstable; urgency=medium

  * fix a case where with the upcoming introduction of sub-commands the spice
    ticket could be read from a file rather than received via stdin

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Jan 2018 15:13:23 +0100

qemu-server (5.0-20) unstable; urgency=medium

  * added spec-ctrl flag to cpu 'flags' property

  * added -IBRS cpu type variants

  * added Skylake-Server cpu type

  * added --pretty option to 'qm showcmd'

  * increase start timeout when hugepages are enabled to compensate for long
    allocation times

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Jan 2018 14:26:30 +0100

qemu-server (5.0-19) unstable; urgency=medium

  * add 'flags' property to cpu option to allow passing PCID support to VMs

  * fix efi disk format detection

  * use default values from load_defaults() when none is specified in conf

 -- Proxmox Support Team <support@proxmox.com>  Tue, 9 Jan 2018 15:49:35 +0100

qemu-server (5.0-18) unstable; urgency=medium

  * fix #1570: fix template backup with pigz

  * fix #1471: change keyboard default to undef

  * fix efi disks in raw mode not being fully writable

  * qm terminal: add --escape option to change or disable the escape key

  * enable vncproxy with vncterm for serial ports

  * add termproxy api call

  * stop adding the same disk as unused multiple times when they are reachable
    through multiple storage definitions

  * check if the guest agent actually runs before a fsfreeze-freeze/thaw

  * update ostype documentation

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Dec 2017 14:56:59 +0100

qemu-server (5.0-17) unstable; urgency=medium

  * correct cpuunits range

  * check if base volumes are unused before deleting a template

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Oct 2017 14:58:00 +0200

qemu-server (5.0-16) unstable; urgency=medium

  * add new qm command 'importovf', to create VMs from an OVF manifest

  * snapshot: use explicitly configured vmstate storage

  * config: add vmstatestorage option

  * VM.Snapshot.Rollback privilege added

  * migration : enable mtunnel for insecure migration

  * ovmf: deprecate old legay ovmf image and refactor

  * improve efidisk creation

  * efidisk: do not hard code efivar base image size

  * fix #1441: do not unplug controllers when the mirroring is finished

  * do not overwrite global signal handlers

  * update_vm: sort logged parameters

  * remove legacy sparsecp

  * remove unused obsolete vmtar

  * fix #1125: check for KVM support before starting VM

 -- Proxmox Support Team <support@proxmox.com>  Thu, 5 Oct 2017 11:17:26 +0200

qemu-server (5.0-15) unstable; urgency=medium

  * reduce migration downtime

  * fix freezing logic when saving vm states

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Aug 2017 10:46:33 +0200

qemu-server (5.0-14) unstable; urgency=medium

  * fix disk throttle parameters

  * improve compatibility when live-migrating from pve-4

 -- Proxmox Support Team <support@proxmox.com>  Mon, 17 Jul 2017 11:17:53 +0200

qemu-server (5.0-13) unstable; urgency=medium

  * Fix #1417: make sure the target storage allows disk images before importing

 -- Proxmox Support Team <support@proxmox.com>  Thu, 13 Jul 2017 06:48:43 +0200

qemu-server (5.0-12) unstable; urgency=medium

  * Use default values when memory is not set in vm.conf when migrating

 -- Proxmox Support Team <support@proxmox.com>  Mon, 03 Jul 2017 14:39:25 +0200

qemu-server (5.0-11) unstable; urgency=medium

  * Fix #1417: properly check for 'images' content type when allocating disks

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Jun 2017 09:33:17 +0200

qemu-server (5.0-10) unstable; urgency=medium

  * don't use cirrus by default for sane OS'

  * replication: remove guest states to ensure no old states are exists

  * allow disks on shared storages on replicated VMs

  * refuse to add non-replicatable disks to replicating VMs

  * config: has_feature() take default for backup into account

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Jun 2017 13:26:38 +0200

qemu-server (5.0-9) unstable; urgency=medium

  * migrate: use 'mtunnel' from pvecm

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Jun 2017 11:01:15 +0200

qemu-server (5.0-8) unstable; urgency=medium

  * migrate: pass the with_snapshots parameter

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 12:58:33 +0200

qemu-server (5.0-7) unstable; urgency=medium

  * PVE/QemuMigrate.pm: use new replication job helpers from AbstractMigrate

  * Change target in replication-state when replication direction is switched

  * PVE/QemuMigrate.pm: use replication job, transfer replication state

  * add regression tests for get_replicatable_volumes

  * get_replicatable_volumes: fix CDROM and local file/device handling

  * get_replicatable_volumes: add unused volumes

  * get_replicatable_volumes: skip volumes if we do not 'own' them

  * PVE::QemuServer::foreach_volid - pass $attr hash to callback

  * get_replicatable_volumes: skip volumes on shared storage

  * PVE/API2/Qemu.pm: aquire guest_migration_lock inside worker

  * Add a migration lock to avoid a replication on rollback-time

  * change from dpkg-deb to dpkg-buildpackage

  * fix #1405: sort pci ids by functions

  * Add new qm command 'importdisk' to import external disk images

  * migration: implement insecure offline migration

  * check also pending changes when reverting/deleting

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 08:50:45 +0200

qemu-server (5.0-6) unstable; urgency=medium

  * fix burst length parameter names and pass them to qemu

  * fix #1229: more explicit spice port allocation

  * migrate: acquire guest_migration_lock during migration

  * do not allow destroy if there are replication jobs

  * use new PVE::ReplicationConfig class

  * improve error on '{full, linked} clone not available' error

  * Fix #1384: add missing decrement to calculation of socket-id

  * migrate: pass ssh_info to storage_migrate

  * tests: fix broken snapshot create tests

  * tests: fix broken snapshot delete tests

  * use ReuseAddr for vncproxy

  * Fix #1361: create disk: stricter parsing of storage:size

  * PVE::QemuServer::create_disks - run code inside eval

  * implement get_replicatable_volumes

  * add description of read/writes statistics in vzdump output

  *  start vncproxy worker in the background

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 May 2017 09:21:27 +0200

qemu-server (5.0-5) unstable; urgency=medium

  * added rerror option to scsi drives

  * added storage replication settings

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Apr 2017 14:02:08 +0200

qemu-server (5.0-4) unstable; urgency=medium

  * fix target storage availability check for live migration with local
    storage

 -- Proxmox Support Team <support@proxmox.com>  Fri, 21 Apr 2017 12:05:58 +0200

qemu-server (5.0-3) unstable; urgency=medium

  * fix vnc connections showing false errors

  * fix #1338: handle writer count limit in live migration with local disks
    with qemu 2.9

 -- Proxmox Support Team <support@proxmox.com>  Fri, 21 Apr 2017 11:47:07 +0200

qemu-server (5.0-2) unstable; urgency=medium

  * fix drive mirror readyness check

  * fix uninitialized warning when deleting unset VM option

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Apr 2017 16:27:59 +0200

qemu-server (5.0-1) unstable; urgency=medium

  * bump version for stretch

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2017 11:59:35 +0100

qemu-server (4.0-109) unstable; urgency=medium

  * drop netcat6 dependency

  * fix a case where VMs refuse to start with scsi disk ids >= 7

  * add skylake to cpu models

  * improve error messages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2017 11:56:14 +0100

qemu-server (4.0-109) unstable; urgency=medium

  * schema updates

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Feb 2017 11:40:53 +0100

qemu-server (4.0-108) unstable; urgency=medium

  * #1260: convert moved template disk to base

  * change TLS cipher suite to HIGH for spiceterm

 -- Proxmox Support Team <support@proxmox.com>  Tue, 31 Jan 2017 13:54:42 +0100

qemu-server (4.0-107) unstable; urgency=medium

  * add dependency on libpve-guest-common-perl

  * add dependency on libpve-common-perl

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jan 2017 09:47:09 +0100

qemu-server (4.0-106) unstable; urgency=medium

  * only use scsi-block with explicit opt-in

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jan 2017 09:19:20 +0100

qemu-server (4.0-105) unstable; urgency=medium

  * use new PVE::Storage::check_volume_access()

  * Set zero $size and continue if volume_resize() returns false

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Jan 2017 09:19:45 +0100

qemu-server (4.0-104) unstable; urgency=medium

  * add setup_environment hook to CLIHandler classes

  * cleanup: drop superfluous condition in assignment

  * add romfile option to hostpci

  * add with-local-disks option for live storage migration

  * drive-mirror: bump timeout to 5s, add 30s inactivity timeout

  * live clone_vm: suspend or freezefs before block-job-cancel

  * add socat and unix socket for storage migration

  * add live storage migration with vm migration

  * clone live vm : add support for multiple jobs

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Jan 2017 14:15:01 +0100

qemu-server (4.0-103) unstable; urgency=medium

  * destroy_vm: allow vdisk_free to fail

  * Display volume size in log when doing a volume backup

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Dec 2016 12:40:40 +0100

qemu-server (4.0-102) unstable; urgency=medium

  * avoid "No balloon device has been activated" warnings in vmstatus

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Dec 2016 10:12:55 +0100

qemu-server (4.0-101) unstable; urgency=medium

  * allow migration of local qcow2 snapshots

 -- Proxmox Support Team <support@proxmox.com>  Mon, 5 Dec 2016 12:38:54 +0100

qemu-server (4.0-100) unstable; urgency=medium

  * allow insecure migrations from older qemu-servers

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Dec 2016 18:50:54 +0100

qemu-server (4.0-99) unstable; urgency=medium

  * qm agent: remove 'guest-' prefix from commands

  * qm agent: pass command as second required argument

  * qm agent: add output formatter

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Dec 2016 07:58:34 +0100

qemu-server (4.0-98) unstable; urgency=medium

  * Add "qm agent" command

  * increase timeout for guest-fsfreeze-freeze

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Nov 2016 12:31:36 +0100

qemu-server (4.0-97) unstable; urgency=medium

  * Add entry for windows 10 and 2016 support

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2016 09:09:23 +0100

qemu-server (4.0-96) unstable; urgency=medium

  * restrict monitor API to Sys.Modify for most commands

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2016 10:02:37 +0100

qemu-server (4.0-95) unstable; urgency=medium

  * vm_shutdown: request 'stopped' state for HA enabled VMs

  * use ha-manager 'stopped' state instead of 'disabled'

  * switch to 'ha-manager set' (instead of 'ha-manager start/stop')

  * vmstate snapshot: activate|deactivate volume

  * qemu_volume_snapshot_delete : fix krbd snapshot delete

  * VZDump/QemuServer: set bless class correctly

  * cleanup windows version handling and hyperv enlightments

  * remove unnecessary format_description properties

  * register new standard option 'pve-qm-image-format'

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2016 08:11:08 +0100

qemu-server (4.0-94) unstable; urgency=medium

  * fix docs for iops/bps_max_length throttling options

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Nov 2016 12:53:44 +0100

qemu-server (4.0-93) unstable; urgency=medium

  * Close #1195: support iops/bps_max_length throttling options

  * fix a perl warning when failing to parse a new drive string

  * fix a warning: discard is not a number

  * fix #1177: allow dedicated migration network

  * change default value for cpuunits to 1024

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Nov 2016 10:26:03 +0100

qemu-server (4.0-92) unstable; urgency=medium

  * Close #351: add more info to backup log

  * add qm listsnapshot call

  * snapshot_list: add bash completion for vmid

  * Fix #1174: remove pve-qm-drive

  * enable drive-mirror with iothread for qemu 2.7 v2

  * add get_running_qemu_version

  * cpu hotplug : add new cpu hotplug method for qemu 2.7

  * cpu hotplug : add coldplugged cpu to qemu command line

  * cpu hotplug : add print_cpu_device

  * numaX : use cpus option multiple time if cpulist

 -- Proxmox Support Team <support@proxmox.com>  Fri, 21 Oct 2016 09:13:39 +0200

qemu-server (4.0-91) unstable; urgency=medium

  * fix #1131: activate volume before copying efidisk

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Oct 2016 08:21:19 +0200

qemu-server (4.0-90) unstable; urgency=medium

  * fix #1111: qm showcmd wrong escape sequence

  * Avoid to parse empty property string

 -- Proxmox Support Team <support@proxmox.com>  Wed, 05 Oct 2016 07:13:33 +0200

qemu-server (4.0-89) unstable; urgency=medium

  * fix manual page (use efidisk0 instead of efidisk[N])

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Sep 2016 12:21:07 +0200

qemu-server (4.0-88) unstable; urgency=medium

  * restore: better error handling for vdisk deletion

  * forbid migration of template with local base image

  * forbid restore into existing template

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Sep 2016 07:49:45 +0200

qemu-server (4.0-87) unstable; urgency=medium

  * add seabios bootsplash and use it

  * add efidisk0 to config, use efidisk0 for efivars

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Sep 2016 12:34:23 +0200

qemu-server (4.0-86) unstable; urgency=medium

  * hostpci: bring back multifunction pass-through shortcut

  * disable drive-mirror when iothread is enabled

  * hugepages: map numa node IDs to host and guest correctly

  * hugepages: use hostnodes value as numanode for topology

  * qemu-img convert : use default cache=unsafe instead writeback

  * Fix #1057: make protection a fast-plug option

  * add lock check for move_disk API call

  * deactivate new volumes after clone to other node

  * pass datacenter.cfg's mac_prefix to random_ether_addr

 -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Aug 2016 10:11:07 +0200

qemu-server (4.0-85) unstable; urgency=medium

  * Fix #1051: typo: vpcus -> vcpus - so non-root users can change vcpus again

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jul 2016 14:46:43 +0200

qemu-server (4.0-84) unstable; urgency=medium

  * fix #1046: add non-snapshotted disks as unused

  * fix #1040: warn early about moving a snapshotted disk

  * disable usb hotplug for now

  * remove old move disk snapshot check

  * improve errors when trying to migrate disks with snapshots

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jul 2016 11:50:01 +0200

qemu-server (4.0-83) unstable; urgency=medium

  * Add hugepages option

  * Refactor various parts out of QemuServer

  * Include USB devices in vm_devices_list

  * Add usb hotplugging

  * Fix syntax in pve-q35.cfg

  * Fix #146: add name to backup log

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Jun 2016 11:29:01 +0200

qemu-server (4.0-82) unstable; urgency=medium

  * add dependency on DBus

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Jun 2016 11:48:45 +0200

qemu-server (4.0-81) unstable; urgency=medium

  * Add LVM and LVMThin to QemuMigration

  * add check for snapshots at migration

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Jun 2016 12:10:48 +0200

qemu-server (4.0-80) unstable; urgency=medium

  * split old style pipe open call

  * fix #1020: remove unnecessary root check for unused disks

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jun 2016 18:13:03 +0200

qemu-server (4.0-79) unstable; urgency=medium

  * migrate: collect migration tunnel child process (avoid zombies)

  * migrate: use ssh forwarded UNIX socket tunnel

  * migrate: add some more log output

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jun 2016 12:16:31 +0200

qemu-server (4.0-78) unstable; urgency=medium

  * use enter_systemd_scope instead of systemd-run

  * fix #1010: whitelist options for permissions

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jun 2016 11:42:25 +0200

qemu-server (4.0-77) unstable; urgency=medium

  * do not ignore hotplug parse errors

 -- Proxmox Support Team <support@proxmox.com>  Tue, 31 May 2016 12:15:55 +0200

qemu-server (4.0-76) unstable; urgency=medium

  * allow VLAN 1 tag in qemu-kvm vms

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 May 2016 11:25:54 +0200

qemu-server (4.0-75) unstable; urgency=medium

  * fix #975, use new keyAlias feature.

  * add --description to systemd scope unit

 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 May 2016 11:15:56 +0200

qemu-server (4.0-74) unstable; urgency=medium

  * correctly set cpu vendor

  * fix #971: don't activate shared storage in offline migration

  * migrate: check if storage is available

 -- Proxmox Support Team <support@proxmox.com>  Sun, 01 May 2016 09:25:06 +0200

qemu-server (4.0-73) unstable; urgency=medium

  * restore: pass format to vma extract

 -- Proxmox Support Team <support@proxmox.com>  Fri, 29 Apr 2016 09:03:12 +0200

qemu-server (4.0-72) unstable; urgency=medium

  * vm_start : force systemctl stop if orphan scope exist

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Apr 2016 11:09:52 +0200

qemu-server (4.0-71) unstable; urgency=medium

  * Fix #643: activate volumes before resizing

  * fix #947: reenable disk/cdrom passthrough

 -- Proxmox Support Team <support@proxmox.com>  Thu, 21 Apr 2016 10:34:42 +0200

qemu-server (4.0-70) unstable; urgency=medium

  * vm_status: return more verbose HA state

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Apr 2016 09:01:24 +0200

qemu-server (4.0-69) unstable; urgency=medium

  * Fix #848: deactivate old volume after clone before deletion

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Apr 2016 08:24:49 +0200

qemu-server (4.0-68) unstable; urgency=medium

  * change shutdown behaviour on suspended vm

 -- Proxmox Support Team <support@proxmox.com>  Tue, 12 Apr 2016 17:19:20 +0200

qemu-server (4.0-67) unstable; urgency=medium

  * use pve-doc-generator to generate man pages

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 Apr 2016 07:37:16 +0200

qemu-server (4.0-66) unstable; urgency=medium

  * use generic property string parser

  * drive schema: allow 'none' again

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Apr 2016 09:33:16 +0200

qemu-server (4.0-65) unstable; urgency=medium

  * cfg: use the 'urlencoded' format for drive model and serial

  * clone: use the zeroinit filter for sparseinit storages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Mar 2016 09:09:07 +0100

qemu-server (4.0-64) unstable; urgency=medium

  * Use AbstractConfig for Qemu

  * fix #909: pass rate to tap_plug()

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Mar 2016 11:43:28 +0100

qemu-server (4.0-63) unstable; urgency=medium

  * only perform scsi inquiry on device nodes

 -- Proxmox Support Team <support@proxmox.com>  Sat, 27 Feb 2016 10:20:50 +0100

qemu-server (4.0-62) unstable; urgency=medium

  * fix undefined value when starting a q35 machine VM

  * kvm_user_version: update code to use our framework

  * Refactor has_feature
  
 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Feb 2016 17:02:34 +0100

qemu-server (4.0-61) unstable; urgency=medium

  * clone_vm : only deactivate sources volume if source vm if offline

  * Refactor snapshot_create to match LXC.pm

 -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Feb 2016 08:48:59 +0100

qemu-server (4.0-60) unstable; urgency=medium

  * change check for write-zeros

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Feb 2016 17:19:12 +0100

qemu-server (4.0-59) unstable; urgency=medium

  * qemu_machine_pxe : return $machine if no pxe

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Feb 2016 17:37:11 +0100

qemu-server (4.0-58) unstable; urgency=medium

  * deactivate volumes if vm start command fails

 -- Proxmox Support Team <support@proxmox.com>  Sat, 20 Feb 2016 10:26:28 +0100

qemu-server (4.0-57) unstable; urgency=medium

  * delete ram state files when restoring a backup

  * Refactor snapshot code

  * disable vnc server and add -nographic is no vga card is present

  * passthrough : reenable hyperv and add hv_vendor_id for windows

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Feb 2016 12:47:51 +0100

qemu-server (4.0-56) unstable; urgency=medium

  * If we freeze the fs with the Qemu-Guest-Agent test if QGA is running.

 -- Proxmox Support Team <support@proxmox.com>  Mon, 15 Feb 2016 12:51:19 +0100

qemu-server (4.0-55) unstable; urgency=medium

  * improve usb config parsing

  * Refactor update_config_nolock -> write_config

 -- Proxmox Support Team <support@proxmox.com>  Fri, 12 Feb 2016 12:07:56 +0100

qemu-server (4.0-54) unstable; urgency=medium

  * restore: deal with new backup=0 property string

  * add usb3 option for usb-devices

 -- Proxmox Support Team <support@proxmox.com>  Wed, 10 Feb 2016 17:49:19 +0100

qemu-server (4.0-53) unstable; urgency=medium

  * pass $skiplock all the way through to destroy_vm

 -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Feb 2016 11:53:03 +0100

qemu-server (4.0-52) unstable; urgency=medium

  * close tunnel after migration is finish.

 -- Proxmox Support Team <support@proxmox.com>  Tue, 02 Feb 2016 18:16:47 +0100

qemu-server (4.0-51) unstable; urgency=medium

  * Fix #878: disk-size format

  *  Fix #879: exclusion of disk for backup

 -- Proxmox Support Team <support@proxmox.com>  Fri, 29 Jan 2016 10:04:41 +0100

qemu-server (4.0-50) unstable; urgency=medium

  * add hidden option to cpu type

  * fix PVE::HA use clause so HA resources get registered

  * Create firewall dir on VM restore

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Jan 2016 16:57:43 +0100

qemu-server (4.0-49) unstable; urgency=medium

  * increase version to update test environment

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Jan 2016 12:50:07 +0100

qemu-server (4.0-48) unstable; urgency=medium

  * use safe_string_ne for trunks

 -- Proxmox Support Team <support@proxmox.com>  Mon, 18 Jan 2016 16:58:23 +0100

qemu-server (4.0-47) unstable; urgency=medium

  * add support for network trunks

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jan 2016 17:27:32 +0100

qemu-server (4.0-46) unstable; urgency=medium

  * Closes #787: add Haswell-noTSX and Broadwell-noTSX cpu types

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Jan 2016 16:42:05 +0100

qemu-server (4.0-45) unstable; urgency=medium

  * io throttle: pass pool parameters (*_max)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Jan 2016 06:17:52 +0100

qemu-server (4.0-44) unstable; urgency=medium

  * ovmf : don't pass x-vga to vfio-pci

  * check for quorum when starting a VM

 -- Proxmox Support Team <support@proxmox.com>  Sun, 10 Jan 2016 15:11:43 +0100

qemu-server (4.0-43) unstable; urgency=medium

  * disable hyper-v enlightment when xvga is enabled

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 Jan 2016 06:26:31 +0100

qemu-server (4.0-42) unstable; urgency=medium

  * add detect_zeroes option

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Dec 2015 09:20:18 +0100

qemu-server (4.0-41) unstable; urgency=medium

  * add new option to select BIOS (--bios <seabios|ovmf>)

  * fix bug #841: replace get_used_paths with is_volume_in_use

 -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Dec 2015 11:15:23 +0100

qemu-server (4.0-40) unstable; urgency=medium

  * qm: Add VMID auto completion to some commands

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Dec 2015 12:22:25 +0100

qemu-server (4.0-39) unstable; urgency=medium

  * fix bug #828: activate disks before hotplugging them

  * fix bug #783: set KillMode=none, so that systemd don't kill
    them at shutdown

  * reenable steal time

  * backup/restore firewall config with vzdump

 -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Nov 2015 16:50:11 +0100

qemu-server (4.0-38) unstable; urgency=medium

  * Don't treat serial devices as a local resource if they
    point to a socket.

  * qemu_img_convert: activate source volume

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Nov 2015 07:02:01 +0100

qemu-server (4.0-37) unstable; urgency=medium

  * add pve-bridge-hotplug script

 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Nov 2015 16:24:44 +0100

qemu-server (4.0-36) unstable; urgency=medium

  * use qom-get to check if old pxe network rom file are used

  * migration: improve ipv6 case

 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Nov 2015 07:56:14 +0100

qemu-server (4.0-35) unstable; urgency=medium

  * clone: use a fullclone hash instead of $drive->{full}

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Oct 2015 07:06:47 +0100

qemu-server (4.0-34) unstable; urgency=medium

  * use old netdevice bios files for older machine types (<= 2.4)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Oct 2015 09:08:49 +0100

qemu-server (4.0-31) unstable; urgency=medium

  * migrate : add nocheck for resume

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Oct 2015 12:41:43 +0200

qemu-server (4.0-30) unstable; urgency=medium

  * qmrestore: implement bash completion

  * create: add better check for unused IDs

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Oct 2015 13:13:07 +0200

qemu-server (4.0-29) unstable; urgency=medium

  * support serial numbers and models for disks

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Sep 2015 10:56:30 +0200

qemu-server (4.0-28) unstable; urgency=medium

  *  disable kvm_steal_time, because it's currently buggy with live migration

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Sep 2015 07:14:44 +0200

qemu-server (4.0-27) unstable; urgency=medium

  * allow to change boot order with VM.Config.Options privileges

 -- Proxmox Support Team <support@proxmox.com>  Sat, 26 Sep 2015 11:07:11 +0200

qemu-server (4.0-26) unstable; urgency=medium

  * migration: disable compress (already default)

  * migration: enable xbzrle

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Sep 2015 17:59:30 +0200

qemu-server (4.0-25) unstable; urgency=medium

  * fix kvm version parser for CVE stable releases

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Sep 2015 11:48:09 +0200

qemu-server (4.0-24) unstable; urgency=medium

  * improve VM protection mode

  * pci passthough : make vfio default

  * fix error message: allocate to much v-CPUs

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Sep 2015 12:28:19 +0200

qemu-server (4.0-23) unstable; urgency=medium

  * destroy: avoid warning about undefined 'protection' value

 -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Sep 2015 09:38:30 +0200

qemu-server (4.0-22) unstable; urgency=medium

  * add possibility to restore backup on rbd in krbd mode

  *  add krbd support to online snapshot

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Sep 2015 07:55:31 +0200

qemu-server (4.0-21) unstable; urgency=medium

  * qm: implement bash completion

  * add VM protection mode

  * fix move_disk on RBD

  * add HA resources check before destroying a VM

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Sep 2015 10:51:05 +0200

qemu-server (4.0-20) unstable; urgency=medium

  * fix start kvm with os type 'other'

  * spice console: fix 'uninitialized value in concat' due to unnamed VM

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Aug 2015 11:39:52 +0200

qemu-server (4.0-19) unstable; urgency=medium

  * clone: also copy vm firewall config file

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Aug 2015 06:50:04 +0200

qemu-server (4.0-18) unstable; urgency=medium

  * fix bug #688: if vm is not owner of this disk remove from config

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Aug 2015 12:30:52 +0200

qemu-server (4.0-17) unstable; urgency=medium

  * fix bug #603: vmid.fw file not deleted

  * fix bug #517: improve error message

  * adapt /config and /pending API calls to force-delete

 -- Proxmox Support Team <support@proxmox.com>  Wed, 19 Aug 2015 15:44:53 +0200

qemu-server (4.0-16) unstable; urgency=medium

  * remove vm access permissions after destroy

  * pending-delete: remember force-deletes

  * correctly handle empty description in pending section

 -- Proxmox Support Team <support@proxmox.com>  Fri, 14 Aug 2015 08:09:44 +0200

qemu-server (4.0-15) unstable; urgency=medium

  * Fixed wrong UUID in Qemu VZDump backup

  * add memory_unplug support V2

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Jul 2015 11:32:51 +0200

qemu-server (4.0-14) unstable; urgency=medium

  * fixed bug 662: wrong subroutine for parsing startup order

  * cpuflags : don't enforce with tcg mode

  * cpuflags : remove enforce for cpumodel=host

  * cpuflags : remove -rdtscp for Opteron cpu models

  * vzdump : abord backup if disk have iothread enabled

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Jul 2015 13:24:31 +0200

qemu-server (4.0-13) unstable; urgency=medium

  * drive-mirror: now allow interrupts at the scanning bitmap phase

 -- Proxmox Support Team <support@proxmox.com>  Wed, 01 Jul 2015 06:40:52 +0200

qemu-server (4.0-12) unstable; urgency=medium

  * remove outdated host_device format

  * parse_drive: do not overwrite configured format

  * fix aio O_DIRECT check for cdrom drives

 -- Proxmox Support Team <support@proxmox.com>  Wed, 10 Jun 2015 10:32:09 +0200

qemu-server (4.0-11) unstable; urgency=medium

  * activate-noawait pve-api-updates

 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Jun 2015 12:36:15 +0200

qemu-server (4.0-10) unstable; urgency=medium

  * implement cgroups through systemd-run

  * implement hotplug for cpuunits

  * remove old openvz fairscheduler code

 -- Proxmox Support Team <support@proxmox.com>  Fri, 29 May 2015 08:24:33 +0200

qemu-server (4.0-9) unstable; urgency=medium

  * qmp drive-mirror : set big timeout

  * qemu-mirror : block job complete : use ready flag

 -- Proxmox Support Team <support@proxmox.com>  Tue, 12 May 2015 08:19:38 +0200

qemu-server (4.0-8) unstable; urgency=medium

  * trigger pve-api-updates event

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 May 2015 14:57:55 +0200

qemu-server (4.0-7) unstable; urgency=medium

  * cleanup: use new standard option 'pve-startup-order'

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Apr 2015 10:04:04 +0200

qemu-server (4.0-6) unstable; urgency=medium

  * fix ha resource names

 -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Apr 2015 13:11:12 +0200

qemu-server (4.0-5) unstable; urgency=medium

  * use new pve-ha-manager

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Mar 2015 12:48:41 +0100

qemu-server (4.0-4) unstable; urgency=medium

  * add qemu cpu flags optimisations for kernel 3.10

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Mar 2015 08:58:56 +0100

qemu-server (4.0-3) unstable; urgency=medium

  * vmstatus: use vcpus if defined

  * balloon: use qom-get for guest balloon statistics

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Mar 2015 08:22:47 +0100

qemu-server (4.0-2) unstable; urgency=medium

  * drive_add: escape \ character

  * bugfix: allow manual balloning if shares = 0
  
 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Mar 2015 10:21:52 +0100

qemu-server (4.0-1) unstable; urgency=medium

  * updated for debian jessie

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Feb 2015 13:00:56 +0100

qemu-server (3.3-20) unstable; urgency=low

  * correctly set an remove lock (fix "qm unlock")

 -- Proxmox Support Team <support@proxmox.com>  Sun, 15 Feb 2015 09:05:40 +0100

qemu-server (3.3-19) unstable; urgency=low

  * commit pending values when changing CDROM

 -- Proxmox Support Team <support@proxmox.com>  Sat, 14 Feb 2015 09:24:03 +0100

qemu-server (3.3-18) unstable; urgency=low

  * bugfix : add missing queues nic option in print_net

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Feb 2015 09:05:21 +0100

qemu-server (3.3-17) unstable; urgency=low

  * fix CDROM hotplug
  
  * This fix hotplug for devices behind bridges
  
  * check possibility to rollback a snapshot early

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Feb 2015 08:19:02 +0100

qemu-server (3.3-16) unstable; urgency=low

  * QemuServer: fix wrong binding of pci root ports, bridges or switches
    to vfio

 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Feb 2015 06:32:14 +0100

qemu-server (3.3-15) unstable; urgency=low

  * code cleanup: add foreach_dimm sub
  
  * hotplug: memory hotplug option is not hotpluggable
  
  * fix bug 597: hotplug fix

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Feb 2015 07:05:05 +0100

qemu-server (3.3-14) unstable; urgency=low

  * include memory hotplug patch

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Jan 2015 07:11:10 +0100

qemu-server (3.3-13) unstable; urgency=low

  * hotplug config: allow to enable specific features

 -- Proxmox Support Team <support@proxmox.com>  Tue, 27 Jan 2015 12:39:21 +0100

qemu-server (3.3-12) unstable; urgency=low

  * add new vcpus option

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Jan 2015 08:04:44 +0100

qemu-server (3.3-11) unstable; urgency=low

  * enable hotplug by default

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Jan 2015 08:53:10 +0100

qemu-server (3.3-10) unstable; urgency=low

  * Support additional e1000 variants for VM machines
  
  * Add link_down flag to network config

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Jan 2015 07:15:48 +0100

qemu-server (3.3-9) unstable; urgency=low

  * pending api : fix parsing 0 value

  * fix test for ballon hotplug

  * set boot strict=on to prevent booting from not listed boot devices
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Jan 2015 06:23:10 +0100

qemu-server (3.3-8) unstable; urgency=low

  * new 'pending changes' API

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Jan 2015 13:32:46 +0100

qemu-server (3.3-7) unstable; urgency=low

  * vzdump: use qga freeze in vzdump in snapshot mode
  
  * add custom numa topology support

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Dec 2014 17:24:24 +0100

qemu-server (3.3-6) unstable; urgency=low

  * API change: snapshot_create - remove unused freezefs flag.
  
  * snapshot_create: call fsfreeze if agent flag is set

  * qmpclient: use guest-sync-delimited
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Dec 2014 12:34:50 +0100

qemu-server (3.3-5) unstable; urgency=low

  * drive-mirror: cleanups, avoid division by zero bug

  * shutdown by Qemu Guest Agent if the agent flag is set

  * savevm-end : wait that savevm is finished
   
 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Dec 2014 09:31:17 +0100

qemu-server (3.3-4) unstable; urgency=low

  * serial: allow to pass arbitrary device names
  
  * Add check if host has enough real CPUs for starting VM

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Nov 2014 07:42:10 +0100

qemu-server (3.3-3) unstable; urgency=low

  * drive-mirror: further improvments

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Nov 2014 06:32:04 +0100

qemu-server (3.3-2) unstable; urgency=low

  * drive-mirror: wait that busy eq false before block-job-complete

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Nov 2014 15:35:55 +0100

qemu-server (3.3-1) unstable; urgency=low

  * enable write zeroes optimisations

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Oct 2014 10:35:49 +0200

qemu-server (3.1-35) unstable; urgency=low

  * fix bug #542: return VMID as integer

 -- Proxmox Support Team <support@proxmox.com>  Wed, 17 Sep 2014 15:52:34 +0200

qemu-server (3.1-34) unstable; urgency=low

  * hotplug: allow scsi and virtio-scsi disk hotplug|unplug

 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Sep 2014 11:35:49 +0200

qemu-server (3.1-33) unstable; urgency=low

  * clone_vm: auto generate new uuid

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Aug 2014 09:23:58 +0200

qemu-server (3.1-32) unstable; urgency=low

  *  add Broadwell cpu model

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Aug 2014 12:21:08 +0200

qemu-server (3.1-31) unstable; urgency=low

  * fix bug 529: fix virtio-serial when using q35 machines

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Aug 2014 06:17:08 +0200

qemu-server (3.1-30) unstable; urgency=low

  * bump max hostpci to 4
  
  * set vga=none if x-vga passthrough is enabled

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Aug 2014 09:41:36 +0200

qemu-server (3.1-29) unstable; urgency=low

  * vm_stop: do not use ha commands if $migratedfrom is set
  
 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Jul 2014 06:53:05 +0200

qemu-server (3.1-28) unstable; urgency=low

  * disable kvm cpu signature if x-vga is enabled
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 24 Jul 2014 06:52:25 +0200

qemu-server (3.1-27) unstable; urgency=low

  * pci passthrough: Reset device only if has_fl_reset is defined

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Jul 2014 06:11:49 +0200

qemu-server (3.1-26) unstable; urgency=low

  * enable linked clones from snapshots (ceph)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Jul 2014 09:28:47 +0200

qemu-server (3.1-25) unstable; urgency=low

  * allow resize of virtio windows boot disk (virtio-win-0.1-74 have 
    fixed the resize bug)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Jul 2014 12:48:03 +0200

qemu-server (3.1-24) unstable; urgency=low

  * new option smbios1: specify SMBIOS type 1 fields (uuid, ...)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Jun 2014 11:13:27 +0200

qemu-server (3.1-23) unstable; urgency=low

  * vncproxy: remove check if VM is running

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jun 2014 09:56:02 +0200

qemu-server (3.1-22) unstable; urgency=low

  * hostpci: add pci multifunction support
  
  * hostpci: add pcie and x-vga passthrough

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jun 2014 09:31:30 +0200

qemu-server (3.1-21) unstable; urgency=low

  * protect websocket API with vncticket

 -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Jun 2014 17:43:25 +0200

qemu-server (3.1-20) unstable; urgency=low

  * vncwebsocket: do not proxy connection (not required)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Jun 2014 12:45:39 +0200

qemu-server (3.1-19) unstable; urgency=low

  * do not depend on novnc-pve package (use new HTTPServer feature instead)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Jun 2014 11:04:48 +0200

qemu-server (3.1-18) unstable; urgency=low

  * depend on novnc-pve package
  
  * support webockets for VNC console
  
  * migration : add setup state

  * add virtio-net multiqueue support
  
  * add firewall option to qemu network interface
  
  * add initiator-name to iscsi drives if configured

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Jun 2014 09:00:03 +0200

qemu-server (3.1-17) unstable; urgency=low

  * depend on pve-firewall package

 -- Proxmox Support Team <support@proxmox.com>  Tue, 06 May 2014 11:28:26 +0200

qemu-server (3.1-16) unstable; urgency=low

  * fix bug #502: allow creation of empty vma archives
  
  * fix bug #510: move_disk - don't delete disk if used in a previous snasphot

  * qmrestore: removed short timeout
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Apr 2014 09:29:26 +0200

qemu-server (3.1-15) unstable; urgency=low

  * correctly disable unwanted migrate features (xbzrle).
  
  * QemuMigrate: print migration xbzrle if enabled

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Feb 2014 08:06:29 +0100

qemu-server (3.1-14) unstable; urgency=low
  
  * Add title of VM to Spice Client

  * deactivate volume after move_disk
  
  * add cpu_hotplug (and maxcpus config)
  
  * migration : enable auto-converge capability

 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 Jan 2014 06:49:16 +0100

qemu-server (3.1-13) unstable; urgency=low

  * pci passthrough: new option to disable device ROM (rombar=off)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Dec 2013 11:45:46 +0100

qemu-server (3.1-12) unstable; urgency=low

  * spiceproxy: use POST instead of GET
  
 -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Dec 2013 10:49:30 +0100

qemu-server (3.1-11) unstable; urgency=low

  * depend on pve-qemu-kvm >= 1.7-1
  
  * fix 'qm unlink' command syntax
  
  * add 'pvscsi' to the list of scsi controllers (emulate the VMware
    PVSCSI device)

  * add 'lsi53c810' to the list of scsi controllers (supported on some 
    very old Windows NT versions)

  * add 'vmxnet3' to the list of available network card models (emulate
    VMware paravirtualized network card)
  
  * add drive option 'discard'
  
  * add support for new qemu throttling burst max parameters.

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 Dec 2013 10:48:33 +0100

qemu-server (3.1-10) unstable; urgency=low

  * add +lahf_lm flag to kvm64 cpudef

 -- Proxmox Support Team <support@proxmox.com>  Fri, 29 Nov 2013 09:18:39 +0100

qemu-server (3.1-9) unstable; urgency=low
  
  * clone: deactivate volumes after clone to other node

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Nov 2013 08:17:35 +0100

qemu-server (3.1-8) unstable; urgency=low

  * clone: correctly check drive options (avoid feature is not available bug)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Oct 2013 07:36:26 +0200

qemu-server (3.1-7) unstable; urgency=low

  * spice: add multi-monitors support

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Oct 2013 09:13:23 +0200

qemu-server (3.1-6) unstable; urgency=low

  * use new PVE::Storage::abs_filesystem_path()
  
  * use warnings instead of global -w flag

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Oct 2013 12:42:42 +0200

qemu-server (3.1-5) unstable; urgency=low

  * introduce new ostype 'solaris' (run without x2apic).

 -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Sep 2013 06:55:33 +0200

qemu-server (3.1-4) unstable; urgency=low

  * qemu migrate : only wait for spice server online + eval
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Sep 2013 06:29:39 +0200

qemu-server (3.1-3) unstable; urgency=low

  * speedup restore on glusterfs (do not write zero bytes)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Sep 2013 09:13:34 +0200

qemu-server (3.1-2) unstable; urgency=low

  * Allow VMAdmin/DatastoreUser to delete disk 

 -- Proxmox Support Team <support@proxmox.com>  Thu, 05 Sep 2013 07:48:07 +0200

qemu-server (3.1-1) unstable; urgency=low

  * allow pass through of usb parallel devices (--parallel0 /dev/usb/lp0)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 14 Aug 2013 12:20:23 +0200

qemu-server (3.0-30) unstable; urgency=low

  * fix bugs in migration code (wrong qw() usage)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Aug 2013 09:49:20 +0200

qemu-server (3.0-29) unstable; urgency=low

  * vncproxy: load config from correct node

 -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Aug 2013 08:15:59 +0200

qemu-server (3.0-28) unstable; urgency=low

  * allow to use a socket for serial devices
  
  * implement 'qm terminal' to open terminal via serial device
  
  * add ability to run without graphic card ('vga: serial[n]')

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Aug 2013 10:05:35 +0200

qemu-server (3.0-27) unstable; urgency=low

  * add support for unsecure/fast migration (setting in datacenter.cfg)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Jul 2013 11:24:36 +0200

qemu-server (3.0-26) unstable; urgency=low

  * remove spice cert paths (depend on pve-qemu-kvm >= 1.4-16)
  
  * implement spice seamless migration

 -- Proxmox Support Team <support@proxmox.com>  Tue, 23 Jul 2013 10:08:33 +0200

qemu-server (3.0-25) unstable; urgency=low

  * support usb redirection devices for spice (usb[n]: spice)
  
  * disable tablet device by default for spice

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Jul 2013 09:38:25 +0200

qemu-server (3.0-24) unstable; urgency=low
  
  * spiceproxy API: allow client to choose proxy address
  
  * spiceproxy API: read cert subject name directly using Net::SSLeay
  
  * spice: use TLS (encrypt whole traffic)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Jul 2013 08:14:46 +0200

qemu-server (3.0-23) unstable; urgency=low

  * allow to pass SCSI generic devices to guests, for example "scsi0: /dev/sg5"

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Jul 2013 06:49:45 +0200

qemu-server (3.0-22) unstable; urgency=low

  * cpu flags optimization

 -- Proxmox Support Team <support@proxmox.com>  Mon, 15 Jul 2013 09:14:49 +0200

qemu-server (3.0-21) unstable; urgency=low

  * add support for SPICE

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Jun 2013 13:15:48 +0200

qemu-server (3.0-20) unstable; urgency=low

  * new API to update VM config: this one is fully asynchronous.
  
  * snapshot rollback: use pc-i440fx-1.4 as default

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Jun 2013 11:44:16 +0200

qemu-server (3.0-19) unstable; urgency=low

  * config: implement new 'machine' configuration
  
  * migrate:  pass --machine parameter to remote 'qm start' command

  * snapshot: store/use 'machine' confifiguration
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 05 Jun 2013 10:27:47 +0200

qemu-server (3.0-18) unstable; urgency=low

  * imlement delete flag for move_disk
  
  * API: rename move to move_disk

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 May 2013 10:57:50 +0200

qemu-server (3.0-17) unstable; urgency=low

  * implement storage migration ("qm move")

 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 May 2013 13:01:16 +0200

qemu-server (3.0-16) unstable; urgency=low

  * fix bug 395: correctly handle unused disk with storage alias

  * fix unused disk handling (do not hide unused disks when used with snapshot).

 -- Proxmox Support Team <support@proxmox.com>  Tue, 28 May 2013 12:23:12 +0200

qemu-server (3.0-15) unstable; urgency=low

  * qemu_img_format : use raw for as default for other storage

 -- Proxmox Support Team <support@proxmox.com>  Thu, 23 May 2013 11:33:47 +0200

qemu-server (3.0-14) unstable; urgency=low

  * fix bug #389: avoid error if balloon is undefined

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 May 2013 07:17:38 +0200

qemu-server (3.0-13) unstable; urgency=low

  * fix bug #391 - restore: test if requested format is supported

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 May 2013 12:03:56 +0200

qemu-server (3.0-12) unstable; urgency=low

  * use add_vm_to_pool/remove_vm_from_pool from PVE::AccessControl

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 May 2013 12:02:41 +0200

qemu-server (3.0-11) unstable; urgency=low

  * clone disk : keep source volume params

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 May 2013 10:18:21 +0200

qemu-server (3.0-10) unstable; urgency=low

  * fix bug #381: use PVE::Tools::next_migrate_port()
  
  * clone: check is we can clone to target storage

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 May 2013 07:31:47 +0200

qemu-server (3.0-9) unstable; urgency=low

  * restore: do not restore template flag

 -- Proxmox Support Team <support@proxmox.com>  Wed, 08 May 2013 10:23:49 +0200

qemu-server (3.0-8) unstable; urgency=low

  * qemu_img_format: use 'raw' for lvm

  * drive-mirror : die if stats are empty

  * set long timeout for query-block-jobs
  
 -- Proxmox Support Team <support@proxmox.com>  Tue, 07 May 2013 10:19:19 +0200

qemu-server (3.0-7) unstable; urgency=low

  * has_feature: return list of allowed nodes

 -- Proxmox Support Team <support@proxmox.com>  Mon, 06 May 2013 08:58:35 +0200

qemu-server (3.0-6) unstable; urgency=low

  * fix bug #379 - restore: allow to overwrite existing VMs if user has 
    VM.Backup permissions

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 May 2013 07:53:40 +0200

qemu-server (3.0-5) unstable; urgency=low

  * implement shared file locks

 -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Apr 2013 11:35:01 +0200

qemu-server (3.0-4) unstable; urgency=low

  * fix bug 377: make qm rescan work properly
  
  * avoid endless loop in QMPClient
  
  * use vm create permissions for templates

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Apr 2013 07:59:28 +0200

qemu-server (3.0-3) unstable; urgency=low

  * allow sparse restore for sheepdog and rbd

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Apr 2013 06:21:40 +0200

qemu-server (3.0-2) unstable; urgency=low

  * fix warnings in syslog

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Mar 2013 06:25:12 +0100

qemu-server (3.0-1) unstable; urgency=low

  * start 3.0 development

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Mar 2013 11:39:08 +0100

qemu-server (2.3-17) unstable; urgency=low

  * fix backup-cancel timeout

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Mar 2013 10:58:58 +0100

qemu-server (2.3-16) unstable; urgency=low

  * vncproxy (another try): wait max 10s for the socket if it does not
    exist

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Mar 2013 06:42:36 +0100

qemu-server (2.3-15) unstable; urgency=low

  * revert vncproxy change because it breaks console on remote hosts.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Feb 2013 12:53:59 +0100

qemu-server (2.3-14) unstable; urgency=low

  * bugfix #340 : don't set cache=none to cdrom
  
  * Migrate: fix check if a backing file exist  
  
  * vncproxy: wait max 10s for the socket if it does not exist
  
  * vzdump: improve error reporting

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Feb 2013 06:21:30 +0100

qemu-server (2.3-13) unstable; urgency=low

  * set cache=none by default

 -- Proxmox Support Team <support@proxmox.com>  Mon, 25 Feb 2013 06:12:14 +0100

qemu-server (2.3-12) unstable; urgency=low

  * disable hotplug by default (revert previous change)
  
  * disable usb2 controller by default (revert previous change)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Feb 2013 09:52:13 +0100

qemu-server (2.3-11) unstable; urgency=low

  * fix backup parameters for pve-qemu-kvm 1.4-4

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Feb 2013 10:47:55 +0100

qemu-server (2.3-10) unstable; urgency=low

  * enable hotplug by default
  
  * enable usb2 controller by default

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Feb 2013 10:45:28 +0100

qemu-server (2.3-9) unstable; urgency=low

  * depend on pve-qemu-kvm >= 1.4-1

  * qemu 1.4 fix : rename stats-polling-interval to
    guest-stats-polling-interval
  
  * remove expected_downtime from migration status (not set in qemu 1.4,
    always 0)

  * do not set cache=none for .raw files - use qemu default instead
    (writeback)
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Feb 2013 10:38:13 +0100

qemu-server (2.3-8) unstable; urgency=low

  * fix tar restore: correctly check if VM config already exists

 -- Proxmox Support Team <support@proxmox.com>  Mon, 28 Jan 2013 09:53:12 +0100

qemu-server (2.3-7) unstable; urgency=low

  * allow to suspend/resume VM during backup

 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Jan 2013 10:25:17 +0100

qemu-server (2.3-6) unstable; urgency=low

  * fix bug #315: cancel backup before stopping the VM

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Jan 2013 13:22:58 +0100

qemu-server (2.3-5) unstable; urgency=low

  * fix bug #307: correctly restore disk settings

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Jan 2013 06:48:48 +0100

qemu-server (2.3-4) unstable; urgency=low

  * qmrestore vma files: when restoring to same VMID, only remove volumes
    contained in backup - other volumes will be still available as
    'unused' disks. Note: tar restore still removes all volumes.

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Jan 2013 07:02:00 +0100

qemu-server (2.3-3) unstable; urgency=low

  * fix Bug #293: CDROM size not reset when set to use no media
  
  * set migrate_downtime default value to 0.1 (and use float instead of int)

  * implement dynamic migration_downtime
  
  * allow manual ballooning if shares is set to zero
  
  * new api2 call: vm_feature (test support for snapshots/clone feature)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Jan 2013 06:31:38 +0100

qemu-server (2.3-2) unstable; urgency=low

  * use memory info from ballon driver (if enabled)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 18 Dec 2012 12:51:57 +0100

qemu-server (2.3-1) unstable; urgency=low

  * include new qemu backup feature

 -- Proxmox Support Team <support@proxmox.com>  Wed, 12 Dec 2012 15:14:59 +0100

qemu-server (2.0-71) unstable; urgency=low

  * show better error message if bridge does not exist
  
  * QMPClient: support fdsets

 -- Proxmox Support Team <support@proxmox.com>  Tue, 11 Dec 2012 11:17:47 +0100

qemu-server (2.0-70) unstable; urgency=low

  * fix version parser for qemu 1.3

  * add new cpu types: SandyBridge Haswell Opteron_G4 Opteron_G5

  * remove rhel specific cpu types: cpu64-rhel6 cpu64-rhel5

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Nov 2012 07:45:19 +0100

qemu-server (2.0-69) unstable; urgency=low

  * fix ballon monitor command (use bytes instead of MBs)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Nov 2012 06:13:46 +0100

qemu-server (2.0-68) unstable; urgency=low

  * vzdump: store drive in correct order (sort) to avoid confusion

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Nov 2012 06:25:33 +0100

qemu-server (2.0-67) unstable; urgency=low

  * fix allocation size in qmrestore

 -- Proxmox Support Team <support@proxmox.com>  Sat, 03 Nov 2012 07:54:06 +0100

qemu-server (2.0-66) unstable; urgency=low

  * vzdump: restore sata drives correctly

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Nov 2012 07:43:16 +0100

qemu-server (2.0-65) unstable; urgency=low

  * remove hardcoded blowfish cipher

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 13:58:27 +0100

qemu-server (2.0-64) unstable; urgency=low

  * fix memory leak in QMP Client (many thanks to Stefan!)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Oct 2012 12:14:51 +0100

qemu-server (2.0-63) unstable; urgency=low

  * fix bug in vmtar 

 -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Oct 2012 10:00:50 +0200

qemu-server (2.0-62) unstable; urgency=low

  * vncproxy: wait until vnc port is ready

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Oct 2012 08:58:52 +0200

qemu-server (2.0-61) unstable; urgency=low

  * add 'win8' ostype (same defaults as win7 for now)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 23 Oct 2012 09:35:27 +0200

qemu-server (2.0-60) unstable; urgency=low

  * fix bug 258:  use bridge mtu for tap interfaces

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Oct 2012 12:26:42 +0200

qemu-server (2.0-59) unstable; urgency=low

  * disable vzdump for VM containing snapshots

 -- Proxmox Support Team <support@proxmox.com>  Thu, 27 Sep 2012 09:41:19 +0200

qemu-server (2.0-58) unstable; urgency=low

  * fix bug 251: use new command line syntax

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Sep 2012 12:43:17 +0200

qemu-server (2.0-57) unstable; urgency=low

  * fix migrating VMs with snapshots

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Sep 2012 08:12:37 +0200

qemu-server (2.0-56) unstable; urgency=low

  * include shanpshot support

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Sep 2012 15:59:40 +0200

qemu-server (2.0-55) unstable; urgency=low

  * migrate: disable xbzrle (not stable)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 Aug 2012 11:04:35 +0200

qemu-server (2.0-54) unstable; urgency=low

  * use mbps instead of bps
  
  * try to make migrate more stable

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Aug 2012 12:16:39 +0200

qemu-server (2.0-53) unstable; urgency=low

  * livemigrate : activate xbzrle cache

  * scsihw: add megasas controller
  
  * partly fix bug 247: retry qmp open 

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Aug 2012 13:45:18 +0200

qemu-server (2.0-52) unstable; urgency=low

  * fix bug 217: stop VM after failed migrate

 -- Proxmox Support Team <support@proxmox.com>  Thu, 23 Aug 2012 10:33:57 +0200

qemu-server (2.0-51) unstable; urgency=low

  * support up to 32 network devices
  
  * support up to 16 virtio devices

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Aug 2012 10:06:39 +0200

qemu-server (2.0-50) unstable; urgency=low

  * implement 'qm rescan' to update disk sizes and unused disk info

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Aug 2012 09:22:29 +0200

qemu-server (2.0-49) unstable; urgency=low

  * fix bug 242: re-add old monitor code

 -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Aug 2012 10:33:37 +0200

qemu-server (2.0-48) unstable; urgency=low

  * add size hint to drive options
  
  * new 'qm resize' command

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 Aug 2012 06:55:39 +0200

qemu-server (2.0-47) unstable; urgency=low

  * implement virtio-scsi-pci controller

 -- Proxmox Support Team <support@proxmox.com>  Wed, 01 Aug 2012 08:57:52 +0200

qemu-server (2.0-46) unstable; urgency=low

  * bug fix: allow to set devices directly (-ide1 /dev/XYZ)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Jul 2012 11:59:14 +0200

qemu-server (2.0-45) unstable; urgency=low

  * migrate: only scan available storages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Jul 2012 10:18:22 +0200

qemu-server (2.0-44) unstable; urgency=low

  * migrate: only scan necessary storage for unused volumes

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Jul 2012 06:59:23 +0200

qemu-server (2.0-43) unstable; urgency=low

  * use new QMPClient code

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Jul 2012 07:05:28 +0200

qemu-server (2.0-42) unstable; urgency=low

  * fix pool permission checks on create

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 May 2012 10:13:11 +0200

qemu-server (2.0-41) unstable; urgency=low

  * more fixes for newer pve-storage versions

 -- Proxmox Support Team <support@proxmox.com>  Thu, 24 May 2012 07:24:00 +0200

qemu-server (2.0-40) unstable; urgency=low

  * minor fixes for newer pve-storage versions

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 May 2012 07:23:31 +0200

qemu-server (2.0-39) unstable; urgency=low

  * new startup option to define startup order.
  
  * do not start VMs with /etc/init.d/qemu-server. This is now
  done with /etc/init.d/pve-manager
  
  * qm: removed startall/stopall commands

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Apr 2012 14:26:04 +0200

qemu-server (2.0-38) unstable; urgency=low

  * add directsync cache mode
  
  * fix bug #147: allow to set migrate_downtime to 0

 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Apr 2012 08:51:56 +0200

qemu-server (2.0-37) unstable; urgency=low

  * fix bug in storage availability check (migrate)

 -- Proxmox Support Team <support@proxmox.com>  Sat, 07 Apr 2012 08:25:59 +0200

qemu-server (2.0-36) unstable; urgency=low

  * use '-no-kvm-pit-reinjection -no-hpet' for win7 and w2k8 guests.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 05 Apr 2012 12:34:00 +0200

qemu-server (2.0-35) unstable; urgency=low

  * fix bug #134: allow to pass file names to qmrestore and 'qm set'

 -- Proxmox Support Team <support@proxmox.com>  Mon, 02 Apr 2012 10:51:41 +0200

qemu-server (2.0-34) unstable; urgency=low

  * fix bug #12: check storage availability early (migrate)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Mar 2012 09:12:46 +0200

qemu-server (2.0-33) unstable; urgency=low

  * fix bug #121: activate volumes correctly

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Mar 2012 11:09:36 +0200

qemu-server (2.0-32) unstable; urgency=low

  * fix usb host syntax (correctly pass hexadecimal numbers with prefix
    '0x' to kvm)
  
  * document rerror/werror options

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Mar 2012 07:11:51 +0200

qemu-server (2.0-31) unstable; urgency=low

  * use new network setup code from PVE::Network (libpve-common-perl)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Mar 2012 10:39:12 +0200

qemu-server (2.0-30) unstable; urgency=low

  * fix ha migration

 -- Proxmox Support Team <support@proxmox.com>  Tue, 27 Mar 2012 12:20:33 +0200

qemu-server (2.0-29) unstable; urgency=low

  * fix bug #97: execute 'clusvcadm' commands for HA managed VMs

 -- Proxmox Support Team <support@proxmox.com>  Tue, 27 Mar 2012 10:36:23 +0200

qemu-server (2.0-28) unstable; urgency=low

  * use Digest::SHA instead of Digest::SHA1

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Mar 2012 12:24:01 +0100

qemu-server (2.0-27) unstable; urgency=low

  * make startall wait up to 10 seconds for quorum

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Mar 2012 09:32:53 +0100

qemu-server (2.0-26) unstable; urgency=low

  * fix bug 109: use scsi inquiry to test if we can use the scsi-block
    driver.

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Mar 2012 10:39:30 +0100

qemu-server (2.0-25) unstable; urgency=low

  * fix bug 102: remove stale status file on stop

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Mar 2012 12:53:32 +0100

qemu-server (2.0-24) unstable; urgency=low

  * save description as comment.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Mar 2012 08:12:29 +0100

qemu-server (2.0-23) unstable; urgency=low

  * fix lvremove call: avoid 'Not a CODE reference' warning

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Mar 2012 06:36:33 +0100

qemu-server (2.0-22) unstable; urgency=low

  * revert tablet mice fix - does not work reliable

 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 Feb 2012 09:45:30 +0100

qemu-server (2.0-21) unstable; urgency=low

  * fix tablet mice as default when live migrate
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 Feb 2012 06:51:09 +0100

qemu-server (2.0-20) unstable; urgency=low

  * fix bug 96: fix vzdump on stopped vm

 -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Feb 2012 07:38:45 +0100

qemu-server (2.0-19) unstable; urgency=low

  * support more CPU models

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Feb 2012 07:18:53 +0100

qemu-server (2.0-18) unstable; urgency=low

  * fix cdrom (/dev/cdrom) permission check

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Feb 2012 07:16:36 +0100

qemu-server (2.0-17) unstable; urgency=low

  * fix cdrom removal bug

 -- Proxmox Support Team <support@proxmox.com>  Wed, 15 Feb 2012 10:48:30 +0100

qemu-server (2.0-16) unstable; urgency=low

  * ignore -tdf (avoid kvm warning) - this is no longer needed 

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Feb 2012 11:18:01 +0100

qemu-server (2.0-15) unstable; urgency=low

  * online migration fix: close tunnel later, wait for connection close
  
  * fix bug #81: do no deactivate volumes in vzdump stop mode

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Jan 2012 11:24:56 +0100

qemu-server (2.0-14) unstable; urgency=low

  * use 'da' instead of 'dk' for Danish keyboard (qemu use that name)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Jan 2012 11:24:40 +0100

qemu-server (2.0-13) unstable; urgency=low

  * load vhost_net module

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Dec 2011 12:25:22 +0100

qemu-server (2.0-12) unstable; urgency=low

  * implement forceStop option for shutdown

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Dec 2011 12:58:00 +0100

qemu-server (2.0-11) unstable; urgency=low

  * do not use ehci by default

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Dec 2011 10:26:36 +0100

qemu-server (2.0-10) unstable; urgency=low

  * set qm exit codes currectly
  
  * fix 'qm shutdown <vmid>'

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Nov 2011 09:35:43 +0100

qemu-server (2.0-9) unstable; urgency=low

  * fix 'qm stopall'

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2011 11:14:01 +0100

qemu-server (2.0-8) unstable; urgency=low

  * be more careful when removing snapshots
  
  * do not call check_lock() for sendkey
  
  * try to detect errors before starting the background task

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2011 08:08:44 +0100

qemu-server (2.0-7) unstable; urgency=low

  * activate/deactivate LVs more carefully
  
  * avoid syslog whenever possible
  
  * code cleanups

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Nov 2011 08:08:04 +0100

qemu-server (2.0-6) unstable; urgency=low

  * set correct migrate speed

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2011 09:12:12 +0100

qemu-server (2.0-5) unstable; urgency=low

  * fix vzdump stop mode

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Nov 2011 06:38:03 +0100

qemu-server (2.0-4) unstable; urgency=low

  * bump version

 -- Proxmox Support Team <support@proxmox.com>  Sat, 19 Nov 2011 09:54:19 +0100

qemu-server (2.0-3) unstable; urgency=low

  * implement monitor API
  
  * implement qmrestore

  * fix vzdump plugin for 2.0

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Nov 2011 11:35:58 +0100

qemu-server (2.0-2) unstable; urgency=low

  * cleanups

 -- Proxmox Support Team <support@proxmox.com>  Wed, 05 Oct 2011 10:15:37 +0200

qemu-server (2.0-1) unstable; urgency=low

  * see Changelog for details

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Aug 2010 13:48:12 +0200

qemu-server (1.1-18) unstable; urgency=low

  * small bug fix im qmigrate

 -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Aug 2010 08:05:21 +0200

qemu-server (1.1-17) unstable; urgency=low

  * carefully catch write errors

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Jul 2010 09:00:48 +0200

qemu-server (1.1-16) unstable; urgency=low

  * add rerror/werror options (patch from l.mierzwa)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Jun 2010 08:49:00 +0200

qemu-server (1.1-15) unstable; urgency=low

  * fix vmtar bug (endless growing archive)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Jun 2010 12:22:17 +0200

qemu-server (1.1-14) unstable; urgency=low

  *  correct order of config option (prevent virtio reordering)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Apr 2010 09:05:15 +0200

qemu-server (1.1-13) unstable; urgency=low

  * allow vlan1-to vlan4094 (Since 802.1q allows VLAN identifiers up to 4094).

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Apr 2010 10:19:37 +0200

qemu-server (1.1-12) unstable; urgency=low

  * minor fixes for new qemu-kvm 0.12.3

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Apr 2010 12:01:17 +0200

qemu-server (1.1-11) unstable; urgency=low

  * experimental support for pci pass-through (option 'hostpci')

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 Jan 2010 13:03:44 +0100

qemu-server (1.1-10) unstable; urgency=low

  * add compatibility code for older kvm versions (0.9)
  
  * only use fairsched when the kernel has openvz support

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Dec 2009 15:17:18 +0100

qemu-server (1.1-9) unstable; urgency=low

  * always display boot menu (Press F12...)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Oct 2009 10:28:23 +0100

qemu-server (1.1-8) unstable; urgency=low

  * fix 'stopall' timeout

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Oct 2009 12:55:23 +0200

qemu-server (1.1-7) unstable; urgency=low

  * do not set fairsched --id when using virtio

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Oct 2009 11:57:57 +0200

qemu-server (1.1-6) unstable; urgency=low

  * disable fairsched when option 'cpuunits' is set to 0 (zero)

  * disable fairsched when the VM uses virtio devices.
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Oct 2009 15:06:48 +0200

qemu-server (1.1-5) unstable; urgency=low

  * suppress syslog when setting migrate downtime/speed

 -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Oct 2009 10:10:55 +0200

qemu-server (1.1-4) unstable; urgency=low

  * depend on stable pve-qemu-kvm

  * new migrate_speed and migrate_downtime settings
  
 -- Proxmox Support Team <support@proxmox.com>  Mon, 28 Sep 2009 11:18:08 +0200

qemu-server (1.1-3) unstable; urgency=low

  * support up to 1000 vlans

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Sep 2009 09:54:35 +0200

qemu-server (1.1-2) unstable; urgency=low

  * introduce new 'sockets' and 'cores' settings

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Sep 2009 09:54:18 +0200

qemu-server (1.1-1) unstable; urgency=low

  * use new pve-storage framework
  
  * delete unused disk on destroy

  * fix cache= option (none|writethrough|writeback)

  * use rtc-td-hack for windows when acpi is enabled
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Jun 2009 08:49:53 +0200

qemu-server (1.0-14) unstable; urgency=low

  * add new tablet option (to disable --usbdevice tablet, which generate
    many interrupts, which is bad when you run many VMs) (Patch was
    provided by Tomasz Chmielewski)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 May 2009 12:50:45 +0200

qemu-server (1.0-13) unstable; urgency=low

  * Conflict with netcat-openbsd

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 May 2009 10:20:54 +0200

qemu-server (1.0-12) unstable; urgency=low

  * fixes for debian lenny

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Apr 2009 14:28:42 +0200

qemu-server (1.0-11) unstable; urgency=low

  *  allow white spaces inside args - use normal shell quoting
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Feb 2009 11:31:36 +0100

qemu-server (1.0-10) unstable; urgency=low

  * add 'args' option

  * bug fix for 'lost description'
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Feb 2009 08:18:29 +0100

qemu-server (1.0-9) unstable; urgency=low

  * add 'parallel' option
  
  * add 'startdate' option
  
  * fix manual page

 -- Proxmox Support Team <support@proxmox.com>  Mon,  2 Feb 2009 08:53:26 +0100

qemu-server (1.0-8) unstable; urgency=low

  * add 'serial' option

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Jan 2009 08:52:24 +0100

qemu-server (1.0-7) unstable; urgency=low

  * use new systax for kvm vga option (needed for kvm newer than kvm77)

 -- Proxmox Support Team <support@proxmox.com>  Wed,  7 Jan 2009 14:46:09 +0100

qemu-server (1.0-6) unstable; urgency=low

  * use predefined names for tap devices

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Dec 2008 13:00:44 +0100

qemu-server (1.0-5) unstable; urgency=low

  * added host usb device support

 -- Proxmox Support Team <support@proxmox.com>  Mon, 17 Nov 2008 11:26:04 +0100

qemu-server (1.0-4) unstable; urgency=low

  * fix status problem

 -- Proxmox Support Team <support@proxmox.com>  Thu, 13 Nov 2008 13:13:43 +0100

qemu-server (1.0-3) unstable; urgency=low

  * small bug fixes

 -- Proxmox Support Team <support@proxmox.com>  Tue, 11 Nov 2008 08:29:23 +0100

qemu-server (1.0-1) unstable; urgency=low

  * update for kvm-75, support vm migration

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Oct 2008 11:04:03 +0200

qemu-server (0.9) unstable; urgency=low

  * initial release

 -- Proxmox Support Team <support@proxmox.com>  Mon,  4 Feb 2008 09:10:13 +0100