1 qemu-server (7.0-11) bullseye; urgency=medium
3 * nic: support the intel e1000e model
5 * lvm: avoid the use of io_uring for now
7 * live-restore: fail early if target storage doesn't exist
9 * api: always add new CD drives to bootorder
11 * fix #2563: allow live migration with local cloud-init disk
13 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jul 2021 11:08:48 +0200
15 qemu-server (7.0-10) bullseye; urgency=medium
17 * avoid using io_uring for drives backed by LVM and configured for write-back
18 or write-through cache
20 -- Proxmox Support Team <support@proxmox.com> Wed, 07 Jul 2021 14:56:34 +0200
22 qemu-server (7.0-9) bullseye; urgency=medium
24 * cpu weight: always clamp value to lower maximum for cgroup v2 and fix
25 defaults (v1 -> 1024, v2 -> 100)
27 * api: improve error handling when applying pending config changes
29 -- Proxmox Support Team <support@proxmox.com> Wed, 07 Jul 2021 12:02:13 +0200
31 qemu-server (7.0-7) bullseye; urgency=medium
33 * improve #3329: ensure write-back is used over write-around for EFI disk,
34 as OVMF profits a lot from cached writes due to its frequent
35 read-modify-write operations
37 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Jul 2021 20:49:50 +0200
39 qemu-server (7.0-6) bullseye; urgency=medium
41 * live-restore: preload efidisk before starting VM
43 * For now do not use io_uring for drives backed by Ceph RBD, with KRBD and
44 write-back or write-through cache enabled, as in that case some polling/IO
47 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Jul 2021 09:45:06 +0200
49 qemu-server (7.0-5) bullseye; urgency=medium
51 * don't default to O_DIRECT (cache=none) on btrfs without nocow
53 * fix #2175: api: update VM: check old drive-config for permissions too to
54 ensure a valid transition when limited to CDROM changes.
56 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 18:58:19 +0200
58 qemu-server (7.0-4) bullseye; urgency=medium
60 * enable io-uring support by default when running QEMU 6.0 or newer
62 * VM start: always check if storages of volumes support correct content-type
64 * use KillMode 'process' for systemd scope to cope with depreacation of
67 * cli, api: handle new warnings task status
69 * improve backup of templates with EFI disks and with SATA and IDE
70 disk controllers in use
72 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 12:57:27 +0200
74 qemu-server (7.0-3) bullseye; urgency=medium
76 * vzdump: add master key support
78 * vzdump: drop legacy fallback logging for dirty-bitmap
80 * vm destroy: do not remove unreferenced disks by default
82 * fix #3329: turn on cache=writeback for efidisks on rbd
84 * avoid setting LUN number for drives when the `pvscsi` controller is used,
85 as that cannot handle multiple LUNs, increase the `scsi-id` instead
87 * config: limit description/comment length to 8 KiB
89 * migrate: enforce that image content type is available and configured on
92 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jun 2021 11:17:52 +0200
94 qemu-server (7.0-2) bullseye; urgency=medium
96 * api: clone: sort vm disks to keep numbers consistent
98 * api: VM status: make template property optional in return object
100 * add compatibility for QEMU 6.0
102 * destroy VM: always remove (referenced) VM state volumes
104 * destroy VM: also check if unused volumes are base images
106 * live-restore: log more similar to regular restore, outputting the user the
107 PBS repo/snapshot and target for each drive.
109 -- Proxmox Support Team <support@proxmox.com> Fri, 28 May 2021 12:46:36 +0200
111 qemu-server (7.0-1) pve; urgency=medium
113 * re-build for Proxmox VE 7 / Debian Bullseye
115 -- Proxmox Support Team <support@proxmox.com> Thu, 13 May 2021 19:11:18 +0200
117 qemu-server (6.4-2) pve; urgency=medium
119 * fix #2862: allow sata/ide template backups
121 * migration: improve speed-limits for >1G connections again
123 * fix getting bootdisk size for new bootorder config scheme
125 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Apr 2021 16:16:04 +0200
127 qemu-server (6.4-1) pve; urgency=medium
129 * fix the +pveN versioned machine types when PXE is used
131 * migration: avoid re-scanning all volumes
133 * migration: do not always set default speed limit if none is configured
135 * migration: rework logging to more humand friendly format, avoiding to much
138 * qmrestore: add live-restore option for CLI tool
140 * live-restore: hold 'create' lock during operation
142 * live-restore: don't remove VM on error, to allow an VM user to save any new
143 data before retrying the operation.
145 * fix #3369: auto-start vm after failed stopmode backup
147 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Apr 2021 16:26:54 +0200
149 qemu-server (6.3-11) pve; urgency=medium
151 * enable live-restore tech preview for Proxmox Backup Server hosted backup
154 * drive mirror: rework periodic status reporting to be human friendlier
156 * drive mirror: stop logging progress for a disk once it got ready
158 * image convert: use human-readable units in progress report
160 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Apr 2021 18:32:06 +0200
162 qemu-server (6.3-10) pve; urgency=medium
164 * increase timeout for block (disk) resize QMP command
166 * fix #3314: cloudinit: IPv6 requires type 'static6'
168 * fix #2670: cloudinit: enable SLAAC again now that client support is there
170 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Mar 2021 18:40:58 +0200
172 qemu-server (6.3-9) pve; urgency=medium
174 * restore vma: fix applying storage-specific bandwidth limit
176 * snapshot: set migration caps before savevm-start
178 * vzdump: improve error logging for query-proxmox-support to avoid
181 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 09:47:27 +0100
183 qemu-server (6.3-8) pve; urgency=medium
185 * qm status: sort hash keys on verbose output
187 * improve windows VM version pinning on VM creation
189 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Mar 2021 10:01:09 +0100
191 qemu-server (6.3-7) pve; urgency=medium
193 * vzdump: increase Proxmox Backup Server backup QMP command timeout
195 -- Proxmox Support Team <support@proxmox.com> Tue, 09 Mar 2021 08:21:43 +0100
197 qemu-server (6.3-6) pve; urgency=medium
199 * fix #3324: clone disk: use larger blocksize for EFI disk
201 * fix #3301: status: add currently running machine and QEMU version to full
204 * api: add endpoint to list all available QEMU machine type and version
207 * always pin virtual machines with Windows as ostype to a fixed QEMU machine
208 version by default. For existing VMs with Windows based OS-type use the 5.1
209 machine version (or the next available one, for older QEMU versions) to
210 improve stabillity of the hardware layout from Windows point of view. Linux
211 and other OS types are not as sensitive to those changes, so keep the
212 default to the currently latest available machine versions for non-Windows
215 * update VM: check for CDROM not just drive permissions when removing a
218 -- Proxmox Support Team <support@proxmox.com> Fri, 05 Mar 2021 21:42:59 +0100
220 qemu-server (6.3-5) pve; urgency=medium
222 * cloudinit: add opennebula config format
224 * cloudinit: remove pending delete on online regenerate image
226 * snapshot/save-vm: periodically print progress and show information about
227 drives during snapshot
229 * qmeventd: explicitly close() pidfds
231 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Feb 2021 18:05:18 +0100
233 qemu-server (6.3-4) pve; urgency=medium
235 * audio: add the "none" dummy audio backend
237 * fix drive-mirror completion with cloudinit
239 * vm destroy: allow opt-out of purging unreferenced disks
241 * fix #2788: do not resume vms after backup if they were paused before
243 * anchor CPU flag regex to avoid arbitrary flag suffixes
245 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Jan 2021 17:21:07 +0100
247 qemu-server (6.3-3) pve; urgency=medium
249 * api: adapt VM destroy and purge description
251 * clone disk: fix regression in offline clone of efidisk
253 * cloudinit: fix cloning/restoring of cloudinit disks in raw format
255 -- Proxmox Support Team <support@proxmox.com> Tue, 15 Dec 2020 16:33:01 +0100
257 qemu-server (6.3-2) pve; urgency=medium
259 * PBS: use improved method to assemble repository url, fixing issues when
260 using IPv6 or non-default ports
262 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Dec 2020 18:06:25 +0100
264 qemu-server (6.3-1) pve; urgency=medium
266 * deactivate volumes after storage migrate
268 * print query-proxmox-support result in 'full' status
270 * clone disk: avoid errors after disk was moved by QEMU
272 * replace cgroups_write by cgroup change_cpu_shares && change_cpu_quota
274 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Nov 2020 14:30:50 +0100
276 qemu-server (6.2-20) pve; urgency=medium
278 * don't migrate replicated VM whose replication job is marked for
281 * ensure qmeventd service is stopped after pve-guests and pve-ha-lrm service
284 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Nov 2020 17:08:45 +0100
286 qemu-server (6.2-19) pve; urgency=medium
288 * fix #3113: unbreak drive hotplug
290 * qmeventd: add handling for -no-shutdown QEMU instances, to avoid errors if
291 the guest OS shuts down the VM during a backup job.
293 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Nov 2020 13:37:00 +0100
295 qemu-server (6.2-18) pve; urgency=medium
297 * migrate: tell QEMU to enable dirty-bitmap migration, if supported
299 * partially fix #3056: always try to cancel backups when failed to start job
301 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Oct 2020 18:23:13 +0100
303 qemu-server (6.2-17) pve; urgency=medium
305 * bootorder: don't print empty 'order=' property
307 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2020 16:08:57 +0200
309 qemu-server (6.2-16) pve; urgency=medium
311 * fix #3010: add 'bootorder' parameter for better control of boot devices
313 * fix VM clone from snapshot with cloudinit disk
315 * fix various possible issues by avoiding conditionally declared variables
318 * PCI passthrough: fix setting VGA to 'none' when marking passed-through
319 device as 'Primary GPU'
321 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Oct 2020 15:51:48 +0200
323 qemu-server (6.2-15) pve; urgency=medium
325 * fix #2570: add 'keephugepages' config property
327 * vzdump: log 'finishing' state for Proxmox Backup Server jobs, to avoid
328 suggesting that the backup is stuck at 100%. This can happen when the
329 validation and mark of pre-existing chunks needs a bit longer.
331 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2020 17:44:28 +0200
333 qemu-server (6.2-14) pve; urgency=medium
335 * vzdump: allow bandwidth limit also PBS backup
337 * avoid a warning when checking the VMs bios
339 * fix #2862: properly backup (all) VM templates
341 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Aug 2020 19:33:54 +0200
343 qemu-server (6.2-13) pve; urgency=medium
345 * fix use of bandwidth limits with offline storage migrate
347 * allow one to add CPU features with a dot, like "+sse4.2", correctly
349 * vzdump: improve logging output and report dirty bitmap state for each disk
351 * vzdump: display actually uploaded chunks as 'write' speed to conform more
352 closely with the actual network transmission line-speed.
354 * fix #2749: vga: disable the display EDID information for the combination of
355 Windows SeaBIOS and VGA guests to avoid a reduced list of possible screen
356 resolutions. (Windows may cache the list of possible resolutions,
357 uninstalling 'Microsoft Basic Display Adapter' and rebooting may then help)
359 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2020 11:42:47 +0200
361 qemu-server (6.2-11) pve; urgency=medium
363 * fix #2857: restore: pass keyfile to pbs-restore
365 * fix #2728: die/warn if target is not a replication target when
368 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Jul 2020 08:13:29 +0200
370 qemu-server (6.2-10) pve; urgency=medium
372 * pass-through: fix mdev cmdline generation
374 * docs: add man page cpu-models.conf(5)
376 * start: set resume parameter for VM start anytime there is a 'vmstate' in
377 the config, not just when it has the 'suspend' lock
379 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Jul 2020 13:37:37 +0200
381 qemu-server (6.2-9) pve; urgency=medium
383 * support encrypted pbs backups
385 -- Proxmox Support Team <support@proxmox.com> Fri, 10 Jul 2020 14:23:46 +0200
387 qemu-server (6.2-8) pve; urgency=medium
389 * backup: detect PBS features and use only supported
391 * fix #2671: include CPU format in man page again
393 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jul 2020 15:14:36 +0200
395 qemu-server (6.2-6) pve; urgency=medium
397 * vzdump: fix variable redeclaration warning
399 * make backup log more friendlier to read for humans
401 -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 19:00:09 +0200
403 qemu-server (6.2-4) pve; urgency=medium
405 * fix #2787: properly parse vga for vncproxy
407 * vncproxy: allow to request a generated VNC password
409 * fix #2794: allow legacy IGD passthrough
411 * avoid backup command timeout with PBS
413 * fix #2741: add VM.Config.Cloudinit permission
415 * enable dirty-bitmap incremental backups for PBS
417 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Jun 2020 11:33:35 +0200
419 qemu-server (6.2-3) pve; urgency=medium
421 * fix #2748: make order of cloudinit interfaces consistent
423 * fix #2774: add early check for non-managed volumes
425 * allow to force MTU for a VM net-device
427 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jun 2020 11:17:09 +0200
429 qemu-server (6.2-2) pve; urgency=medium
431 * adapt net-device hotplug to more strict QMP schema of QEMU 5.0
433 -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2020 13:00:18 +0200
435 qemu-server (6.2-1) pve; urgency=medium
437 * qmrestore: fix VMA restore from STDIN
439 -- Proxmox Support Team <support@proxmox.com> Thu, 07 May 2020 21:51:01 +0200
441 qemu-server (6.1-20) pve; urgency=medium
443 * cfg2cmd: fix uninitialized value warning on OVMF w/o efidisk
445 * vzdump: fix backup of templates with stdout as output
447 * cfg2cmd: set audiodev parameter only on qemu >= 4.2
449 * api: allow listing custom and default CPU models
451 -- Proxmox Support Team <support@proxmox.com> Wed, 06 May 2020 17:16:56 +0200
453 qemu-server (6.1-19) pve; urgency=medium
455 * clone: use new config_lock_shared
457 -- Proxmox Support Team <support@proxmox.com> Tue, 5 May 2020 11:22:04 +0200
459 qemu-server (6.1-18) pve; urgency=medium
461 * vzdump: assemble: fix skipping all pending and snapshot config entries
463 * api/destroy: repeat early checks after locking
465 * migrate: skip rescan for efidisk and shared volumes
467 -- Proxmox Support Team <support@proxmox.com> Mon, 04 May 2020 17:36:40 +0200
469 qemu-server (6.1-17) pve; urgency=medium
471 * backup: never try to freeze in stop mode backup
473 * Fix #2124: Add support for zstd
475 -- Proxmox Support Team <support@proxmox.com> Mon, 4 May 2020 14:11:50 +0200
477 qemu-server (6.1-16) pve; urgency=medium
479 * spice audio: improve compatibility with QEMU versions newer than 4.2
481 * migrate: workaround issues with format switch on storage live migration
483 * fix live migration with replicated unused volumes
485 * importovf: improve compatibility with OVF files without default namespaces
487 * backup restore: use correct storage for format check for cloudinit drives
489 * handle stopping the storage migration NBD server better
491 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Apr 2020 16:23:24 +0200
493 qemu-server (6.1-14) pve; urgency=medium
495 * Use foreach_volume instead of foreach_drive
497 * Use new storage_migrate interface
499 * migrate: update config with changed volume IDs
501 * migrate: allow specifying targetstorage for offline migration
503 * migrate: sync_disks: use allow_rename to avoid collisions on the target
506 * migrate: sync_disks: log output of storage_migrate
508 * migrate: also cleanup disks migrated by storage_migrate in case of failure
510 -- Proxmox Support Team <support@proxmox.com> Thu, 9 Apr 2020 08:56:44 +0200
512 qemu-server (6.1-13) pve; urgency=medium
514 * rescan: fix call to foreach_volume
516 * migration: fix downtime limit auto-increase
518 * migrate: allow arbitrary source->target storage maps
520 * migrate: always check storage permissions and content type
522 * Include full KVM/QEMU "-cpu" parameter with live-migration and
523 snapshots/suspend to allow supporting custom CPU models
525 * fix #2318: allow phys-bits CPU setting
527 * allow custom CPU models
529 * config: harmonize bridge pattern to match the same limits of containers
531 * cpu config: add upcoming EPYC-Rome CPU type
533 -- Proxmox Support Team <support@proxmox.com> Wed, 08 Apr 2020 17:08:13 +0200
535 qemu-server (6.1-12) pve; urgency=medium
537 * CPUConfig: fix module load when pmxcfs is unavailable
539 * migrate: fix replication false-positives
541 * migrate: cleanup disk/bitmaps if 'qm start' failed
543 * migration with targetstorage: check if target storage supports images
545 * fix efidisks on storages with minimum sizes bigger than OVMF_VARS.fd
547 * Implement volume-related helpers and use new foreach_volume
549 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Mar 2020 10:00:13 +0200
551 qemu-server (6.1-11) pve; urgency=medium
553 * vzdump: fix regression in backups for specific storage
555 * custom CPU models: add initial parser and verifier
557 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Mar 2020 09:00:24 +0100
559 qemu-server (6.1-10) pve; urgency=medium
561 * version_guard: early out when major/minor version is high enough
563 * drive-mirror: add support for incremental sync
565 * migrate: add replication info to disk overview
567 * migrate: add live-migration of replicated disks
569 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Mar 2020 15:16:21 +0100
571 qemu-server (6.1-8) pve; urgency=medium
573 * cloudinit: make genisoimage quieter, only output errors
575 * Append newline to all QGA commands for compatibility with non standard
576 conforming Apple based guest agent implementation
578 * add experimental support for proxmox backup server
580 * fix #2580: api/delete: drop VM from HA resources if purge is set
582 * improve drive mirror completion over NBD during migration
584 * add secured unix socket support for NBD storage migration
586 * Disable memory hotplug for custom NUMA topologies and die on misaligned
589 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Mar 2020 11:11:31 +0100
591 qemu-server (6.1-7) pve; urgency=medium
593 * vzdump: always exclude efidisks from backups of machines currently not set
596 * Simplify QEMU version check and require at least 3.0+
598 * Align size to 1 KiB bytes before doing 'qmp block_resize'
600 * fix #2611: use correct operation when calculating the migration bandwidth
603 * fix #2612: allow input-data in guest exec and make command optional
605 * cpu models: add icelake-server and icelake-client
607 * already add models from future QEMU 4.2 release
609 * fix #2264: allow one to add a virtio-rng device for improved entropy
612 * update_disksize: also update disk size if there was no old size at all
614 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2020 19:12:16 +0100
616 qemu-server (6.1-6) pve; urgency=medium
618 * allow reading snapshot config for users with VM.Audit on a guest
620 * fix #2566: increase scsi limit to 31
622 * fix #2578: check if $target is provided in clone
624 * update QMP commands to reflect (future) depreacations and changes in QEMU
626 * resize volume: always request new size from storage after resizing
628 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2020 06:40:43 +0100
630 qemu-server (6.1-5) pve; urgency=medium
632 * Add QEMU CPU flag querying helpers
634 * hotplug_pending: remove redundant write/load config calls
636 * api: vm clone: unlink zombie target VM and firewall config at end of error
639 * add timeout parameter to vm start API/CLI endpoint
641 * fix #2070: vm_start: for a migrating VM, use current format of disk if
644 * hotplug_pending: make 'ssd' option non-hotpluggable, it cannot be changed
645 live on a plugged disk.
647 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jan 2020 10:27:33 +0100
649 qemu-server (6.1-4) pve; urgency=medium
651 * check if QEMU version is recent enough for requested machine type
653 * suspend to disk: check and enforce more strict permissions
655 * update disk size before local disk migration
657 * hide very long commandline on vm_start/migrate failure
659 * fix #2493: show QEMU errors in migration log
661 * api/restore: do not trigger autostart-after-restored task from locked
664 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Dec 2019 16:03:25 +0100
666 qemu-server (6.1-3) pve; urgency=medium
668 * create efidisk: poll the real size after volume creation, as some storages
669 need to create bigger volumes as requested, to cope with their internal
670 alignment requirements.
672 * fix #2469: fix qemu-img convert src_format detection, wrongly reverted.
674 * fix #2510: hostpci: always check if specified device exists
676 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Dec 2019 11:44:14 +0100
678 qemu-server (6.1-2) pve; urgency=medium
680 * api: allow one to remove (hibernation) vmstate
682 * vzdump: log QGA FS freeze/thaw tries in task log
684 * skip efidisk0 in hotplug
686 -- Proxmox Support Team <support@proxmox.com> Sat, 30 Nov 2019 18:38:36 +0100
688 qemu-server (6.1-1) pve; urgency=medium
690 * fix #2367: do not allow snapshot with name PENDING
692 * fix #2469: fix qemu-img convert src_format detection
694 * implement PVE Version addition for QEMU machine allowing to introduce new
695 features while keeping migration compatibility more easily
697 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 13:06:21 +0100
699 qemu-server (6.0-17) pve; urgency=medium
701 * PCI(e) pass-through: ensure we fallback to the previous default "0000"
704 -- Proxmox Support Team <support@proxmox.com> Sat, 23 Nov 2019 09:52:09 +0100
706 qemu-server (6.0-16) pve; urgency=medium
708 * fix #2473: use of unitialized value
710 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Nov 2019 14:18:58 +0100
712 qemu-server (6.0-15) pve; urgency=medium
714 * api/migration: fix autocomplete for targetstorage
716 * add 'type' to guest agent format, allowing one to choose between VirtIO
719 * clone: pre-allocate cloud-init disk for destination
721 * SPICE/QXL: tell Linux VMs that they can add up to 4 display when running
722 with qemu 4.1 or newer
724 * add support to tell showcmd helper to assume a specific forced machine
725 version when assembling a command
727 * refactor QemuServer to avoid cyclic module dependencies
729 * fix #2436: pci: do not hardcode pci domain to 0000
731 * add 'tags' config option for adding meta information to a VM
733 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 19:41:01 +0100
735 qemu-server (6.0-14) pve; urgency=medium
737 * use PVE::DataCenterConfig, use PVE::SSHInfo, use PVE::RRD for RRD data
739 * refactor migration IP retrieval
741 * add missing packages to (build-)dependencies
743 * fix #2457: ga: set-user-password: increase maxLength of password
745 * fix restoring old VM backups made with Promxox VE earlier than 2.3
747 * improve test mocking
749 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Nov 2019 12:12:03 +0100
751 qemu-server (6.0-13) pve; urgency=medium
753 * fix #2434: extend machine regex to support stable release machine updates
755 * prepare to fix #2408, #2355, #2380: use scsi-hd backend for iSCSI as well
757 * fix deleting pending changes for not yet existing options
759 * improve hugepage memory size detection
761 * avoid a race for VMID reservation when importing an OVF manifest to a new
764 * cleanup importidsk CLI command, and say to which exact disk we imported
766 * add simple runtime heuristic for IOThread backup support, to ensure the VM
767 to backup was started with a recent QEMU version.
769 * QMPClient: ensure QMP connection is also closed in certain edge cases
771 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Oct 2019 17:43:41 +0100
773 qemu-server (6.0-12) pve; urgency=medium
775 * fix regression from 6.0-10 with vmstate restore on RBD
777 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 16:31:46 +0200
779 qemu-server (6.0-11) pve; urgency=medium
781 * fix #1071: VMs with IOThread enabled disks can now be backed up
783 * fix regression from 6.0-10 with snapshot restore and statefile
785 * fix regression with from 6.0-10 where forced was always assumed to be true
786 for applying pending changes
788 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 12:50:18 +0200
790 qemu-server (6.0-10) pve; urgency=medium
792 * fix #2344: ignore cloudinit in replication check
794 * fix #1291: add option purge for vm_destroy api call
796 * increase code re-use with pve-container for pending changes in
799 * fix #2412: only do the final configuration destroy after all the VMs
800 resources, and references in other configurations like Firewall or resource
801 pools was successfully cleaned up
803 * fix #2171: ensure that non filesystem based statefiles get activated on VM
806 * fix #2395: improve QEMU image converter to cope better with pure file based
807 sources and iSCSI source and destinations
809 * fix #2402: allow 1GB hugepages if 2MB is unavailable
811 * qemu 4.0 : add Cascadelake-Server and KnightsMill Intel CPU models
813 * fix #2217: don't copy cloudinit disk on clone
815 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Oct 2019 22:04:50 +0200
817 qemu-server (6.0-9) pve; urgency=medium
819 * fix issue where a SPICE remote viewer was disconnected during live migration
821 * Add VM reboot API/CLI integration, allowing to reboot a VM and applying any
822 pending changes in-between
824 * CPU flags: allow one to add aes flag
826 * fix #2263: die on live migration with local cloudinit disk
828 * fix #2041, #2272: Add Spice enhancements
830 * Add support for more (up to 16) PCI(e) devices
832 * usb: Allow one to make SPICE USB ports USB3 capabile
834 * allow one to use USB3 for SPICE USB ports with VMs started already with
835 QEMU version 4.0.0, as live-migrations were not possible with this previous
836 unsupported setup anyway. Live-snapshots from VMs with a SPICE USB device
837 which was manually set (wasn't possible over Webinterface) to USB3 with a
838 machine version of 4.0.0, need to remove the "usb3" flag again from the
839 snapshot config when restoring it.
841 * rework kvm_user_version cache mechanism
843 * api: deletion: check also pending values for serial/usb
845 * migration api: explicitly clear "online" flag if VM is stopped to avoid
846 issues with storage migrations which are handled different for stopped VMs
848 * abort resize disk if current size could not be determined
850 * fix #2382: delete cloudinit disk before restoring
852 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Sep 2019 12:01:58 +0200
854 qemu-server (6.0-7) pve; urgency=medium
856 * ensure new SPICE audio device works also with 'q35' based VMs
858 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Jul 2019 15:13:35 +0200
860 qemu-server (6.0-6) pve; urgency=medium
862 * Add SPICE audio device support
864 * fix #2275: die on invalid sendkey
866 * Make sometimes problematic 'hv-tlbflush' and 'hv-evmcs' CPU flags optional
868 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2019 18:20:10 +0200
870 qemu-server (6.0-5) pve; urgency=medium
872 * do not pass Proxmox VE internal startdate 'now' to QEMU, it does not
875 * use new pcie port hardware for 4.0 and newer q35 machine types
877 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:44:28 +0200
879 qemu-server (6.0-4) pve; urgency=medium
881 * fix guest shutdown if agent is configured but no timeout was passed
883 * cloudinit: set iso-level in genisoimage call
885 * migrate pre-condition check: add size to volume attributes and handle
886 storage not selected manually in storage config
888 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 20:35:09 +0200
890 qemu-server (6.0-3) pve; urgency=medium
892 * do not add evmcs HyperV enlightment at all for now due to incompatibillity
895 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 14:33:01 +0200
897 qemu-server (6.0-2) pve; urgency=medium
899 * add migration precondition api endpoint
901 * wait for possible left over VM scopes to be gone through dbus based helper
904 * fix #2244: Allow timeout for guest-agent shutdown
906 * fix #2083: Add hv_tlbflush, hv_ipi, hv_evmcs enlightenments
908 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Jun 2019 17:46:51 +0200
910 qemu-server (6.0-1) pve; urgency=medium
912 * SMBIOS: followup: allow now 512 characters for full format string
914 * fix #2190: Base64 encode SMBIOS value strings in order to allow more
917 * allow one to add md-clear cpu flag
919 * add qm command for cloudinit config dump
921 * drop vnc x509 param, deprecated in 2.5 removed in 4.0
923 * Fix #1999: cli: listsnapshot: handle multiple roots and mark orphaned as
926 * drop references to un-maintained sheepdog plugin
928 * vm_resume: correctly honor $nocheck
930 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Jun 2019 20:59:07 +0200
932 qemu-server (6.0-0+1) pve; urgency=medium
934 * rebuild for Debian Buster / PVE 6.0
936 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 19:12:34 +0200
938 qemu-server (5.0-51) unstable; urgency=medium
940 * fix #1811: allow non root user to edit serialX: socket entries
942 * allow non root users to add spice usb port
944 * fix #1829: do not ignore format parameter when creating cloudinit
947 * fix: #1075: Restore VM template to VM and try to convert to template
949 * fix #2173: use qemu-img to check cloudinit disk existence
951 * cloudinit: use detected format in volume name parsing
953 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Apr 2019 14:07:59 +0000
955 qemu-server (5.0-50) unstable; urgency=medium
957 * fix #2100: ignore cloudinit drive on offline migration
959 * honor bandwidth limits (bwlimit) for migrate, drive-mirror, clone
962 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Apr 2019 16:22:10 +0200
964 qemu-server (5.0-49) unstable; urgency=medium
966 * return config lock in vm status
968 * move 'pve-snapshot-name' to common
970 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Mar 2019 12:55:03 +0100
972 qemu-server (5.0-48) unstable; urgency=medium
974 * cloud-init: allow custom network/user data files via snippets
976 * fix #2120: use hosts initiator name with qemu-img
978 * fix #2131: get correct device when deleting iothreads
980 * config: NIC macaddr: enforce unicast MAC addresses
982 * implement suspend to disk for running VMs over API and CLI
984 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Mar 2019 13:25:38 +0100
986 qemu-server (5.0-47) unstable; urgency=medium
988 * fix #2043: always stop existing systemd scopes on VM start
990 * use nr_hugepages from /proc/cmdline
992 * fix #2101: cloudinit: IPv6 ending in : not parsed as a string
994 * fix #1891: Add zsh command completion for qm and qmrestore
996 * fix #2097: allow one to set and pass the WWN parameter for IDE, SATA and
999 * allow one to add IVSHMEM device to a VM configuration
1001 * fix #2114: always set correct link status on VM network adapter hotplug
1003 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Mar 2019 10:11:00 +0100
1005 qemu-server (5.0-46) unstable; urgency=medium
1007 * allow explicit hv-vendor-id
1009 * allow explicit set vga with gpu passthrough
1011 * fix #1924: add snapshot parameter
1013 * allow to add pre- start/stop hook scripts
1015 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Feb 2019 13:04:19 +0100
1017 qemu-server (5.0-45) unstable; urgency=medium
1019 * fix #2003: give qm terminal a terminal over ssh
1021 * migrate: fix local disk migration with online VMs
1023 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jan 2019 10:42:03 +0100
1025 qemu-server (5.0-44) unstable; urgency=medium
1027 * fix #1013 : migrate : sync_disk : --targetstorage with offline disk
1029 * add Windows 7 PCIe quirk for adding 'hostpci' devices
1031 * fix #2032: check that type is set before assembling a VGA device
1033 * add configuration to command regression tests
1035 * allow 'none' as VGA option
1037 * fix #1267: move args to the end of qemu commandline
1039 * clone_disk : cloudinit drive: don't clone snapshot name (snapname)
1041 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Dec 2018 10:17:47 +0100
1043 qemu-server (5.0-43) unstable; urgency=medium
1045 * usb: fix check if machine type is q35
1047 * qm cleanup: exit silently if VM config does not belong to node
1050 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Nov 2018 12:57:49 +0100
1052 qemu-server (5.0-42) unstable; urgency=medium
1054 * add mediated devices support
1056 * use improved lspci
1058 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Nov 2018 11:22:04 +0100
1060 qemu-server (5.0-41) unstable; urgency=medium
1062 * fix #1959: add fallback for auto previously set by SLAAC
1064 * create_vm: don't add vmgenid for ARM machines by default
1066 * use qmeventd to execute qm cleanup
1068 * QemuServer: remove PCI sysfs helpers
1070 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2018 14:38:42 +0100
1072 qemu-server (5.0-40) unstable; urgency=medium
1074 * correctly check display vga type
1076 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Nov 2018 17:27:53 +0100
1078 qemu-server (5.0-39) unstable; urgency=medium
1080 * Add `ssd` property to IDE, SATA, and SCSI drives
1082 * fix #1952: make vga memory configurable
1084 * fix #1969: increase max unused disks
1086 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Nov 2018 16:23:26 +0100
1088 qemu-server (5.0-38) unstable; urgency=medium
1090 * add second qmp socket when running qemu >= 2.12 for pending event/reboot
1093 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Oct 2018 12:28:49 +0200
1095 qemu-server (5.0-37) unstable; urgency=medium
1097 * add virtio to the list of valid gpu types
1099 * lower qemu requirement for hv_synic and hv_stimer to 2.12
1101 * prepare for deprecated functionality in qemu 3.0
1103 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Oct 2018 14:53:04 +0200
1105 qemu-server (5.0-36) unstable; urgency=medium
1107 * fix #1908: add VM Generation ID (vmgenid) device by default on new VMs and
1108 allow to set on existing ones
1110 * fix version check in qemu_machine_feature_enabled
1112 * use qemu's internal blockdev-snapshot functions to avoid some issues with
1113 snapshots on qcow2 files
1115 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2018 11:14:32 +0200
1117 qemu-server (5.0-35) unstable; urgency=medium
1119 * add hv_synic and hv_stimer HyperV Enlightment flags on QEMU 3.0 and later
1121 * improve setting QEMU machine type on snapshot and rollback
1123 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Sep 2018 15:29:18 +0200
1125 qemu-server (5.0-34) unstable; urgency=medium
1127 * fix #1865: CloudInit doesn't add IPv6
1129 * allow to add ibpb, ssbd, virt-ssbd, amd-ssbd, amd-no-ssb and pdpe1gb CPU flags
1131 * clone: improve message for ignoring pending changes
1133 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Sep 2018 11:37:24 +0200
1135 qemu-server (5.0-33) unstable; urgency=medium
1137 * fix #1242: allow one to setup an automatic QEMU guest agent fstrim
1138 command after cloning or moving a disk live
1140 * define return properties for vmstatus API call
1142 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2018 14:40:46 +0200
1144 qemu-server (5.0-32) unstable; urgency=medium
1146 * api/agent: do not dereference parameter hash before passing to
1149 * api/agent: import check_agent_error method
1151 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:55:42 +0200
1153 qemu-server (5.0-31) unstable; urgency=medium
1155 * fix #1717: delete snapshot when vm running and drive not attached
1157 * fix qemu agent commands: add missing import of 'agent_cmd' method
1159 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:24:27 +0200
1161 qemu-server (5.0-30) unstable; urgency=medium
1163 * Fix SPICE multi-monitor mode on VMs using q35 machine type
1165 * extend QEMU guest agent API with file read/write, setting VM user password
1166 and executing arbitrary commands in VM
1168 * add guest command group to qm CLI tool
1170 * add 'dryrun' to qm rescan, which only list changes but does not actually
1173 * add a workaround for bug #1650: add content type filter to rescan
1175 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jul 2018 11:39:01 +0200
1177 qemu-server (5.0-29) unstable; urgency=medium
1179 * reserve new VM config with create lock early
1181 * api: allow auto vm start after create finished
1183 * use 'system_wakeup' to resume VMs suspended by their guest OS
1185 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jun 2018 12:11:29 +0200
1187 qemu-server (5.0-28) unstable; urgency=medium
1189 * cloud-init: improve handling of network settings for broken
1190 versions (e.g., the one currently used by CentOS 7)
1192 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jun 2018 12:48:42 +0200
1194 qemu-server (5.0-27) unstable; urgency=medium
1196 * qm agent: check if qga service is running
1198 * fix #1779: vzdump: ensure guest-fsfreeze-thaw is called on error
1200 * fix #1780: change datacenter.conf to datacenter.cfg in description
1202 * fix logic of deleting balloon config property
1204 * activate volume for cloudinit disk
1206 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Jun 2018 15:24:14 +0200
1208 qemu-server (5.0-26) unstable; urgency=medium
1210 * fix #1749: do not copy pending changes when cloning a vm
1212 * make q35 and virtio-scsi-single compatible
1214 * fix an issue where cleanup operations run as part of a VM's systemd scope
1216 * associate cloud-init options with with the VM.Config.Network permission
1218 -- Proxmox Support Team <support@proxmox.com> Mon, 14 May 2018 14:04:26 +0200
1220 qemu-server (5.0-25) unstable; urgency=medium
1222 * fix #1697: only check machine type for pxe
1224 * fix scsi hotplug issue with q35 machines
1226 * fix live migration with local disk issue with nbd
1228 * switch to new method of passing disk serials to qemu
1230 * qemu-img convert: use cache=none for ZFS to not fill up the ARC
1232 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Apr 2018 15:11:58 +0200
1234 qemu-server (5.0-24) unstable; urgency=medium
1236 * use pve-edk2-firmware for supporting OVMF
1238 * restore: implement rate limiting
1240 * stop passing default '-k' (keyboard) QEMU option from datacenter.cfg
1242 * create linked clones of templates by default
1244 * remove legacy vm_monitor_command
1246 * start: always stop an existing $vmid.scope
1248 * implement cloudinit support
1250 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Mar 2018 09:24:08 +0100
1252 qemu-server (5.0-23) unstable; urgency=medium
1254 * fix migrate cache size parameter for qemu 2.11
1256 * typo fixes in migrate task log
1258 * depend on pve-qemu-kvm >= 2.9.1-9
1260 * allow virtio-scsi+iothread controller hot-unplug
1262 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Feb 2018 13:21:08 +0100
1264 qemu-server (5.0-22) unstable; urgency=medium
1266 * fix #1664: nbd mirror: remove socat tunnel now that it is not required
1267 anymore to avoid a 30s inactivity timeout
1269 * fix #1569: add shared flag to disks
1271 * fix #1662: make the 'snapshot' disk parameter work again
1273 * correct 'snapshot' flag description
1275 * CPU types: add EPYC and EPYC-IBPB
1277 * forward returned errors from guest-agent commands
1279 * add new guest-agent commands and add commands as separate api calls
1281 * add agent flag to vm status api call
1283 * clone/restore: make the smbios UUID unique if --unique is used
1285 * add serial:1 to vm-status when config has a serial device configured
1287 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Feb 2018 09:56:08 +0100
1289 qemu-server (5.0-21) unstable; urgency=medium
1291 * fix a case where with the upcoming introduction of sub-commands the spice
1292 ticket could be read from a file rather than received via stdin
1294 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 15:13:23 +0100
1296 qemu-server (5.0-20) unstable; urgency=medium
1298 * added spec-ctrl flag to cpu 'flags' property
1300 * added -IBRS cpu type variants
1302 * added Skylake-Server cpu type
1304 * added --pretty option to 'qm showcmd'
1306 * increase start timeout when hugepages are enabled to compensate for long
1309 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jan 2018 14:26:30 +0100
1311 qemu-server (5.0-19) unstable; urgency=medium
1313 * add 'flags' property to cpu option to allow passing PCID support to VMs
1315 * fix efi disk format detection
1317 * use default values from load_defaults() when none is specified in conf
1319 -- Proxmox Support Team <support@proxmox.com> Tue, 9 Jan 2018 15:49:35 +0100
1321 qemu-server (5.0-18) unstable; urgency=medium
1323 * fix #1570: fix template backup with pigz
1325 * fix #1471: change keyboard default to undef
1327 * fix efi disks in raw mode not being fully writable
1329 * qm terminal: add --escape option to change or disable the escape key
1331 * enable vncproxy with vncterm for serial ports
1333 * add termproxy api call
1335 * stop adding the same disk as unused multiple times when they are reachable
1336 through multiple storage definitions
1338 * check if the guest agent actually runs before a fsfreeze-freeze/thaw
1340 * update ostype documentation
1342 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Dec 2017 14:56:59 +0100
1344 qemu-server (5.0-17) unstable; urgency=medium
1346 * correct cpuunits range
1348 * check if base volumes are unused before deleting a template
1350 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Oct 2017 14:58:00 +0200
1352 qemu-server (5.0-16) unstable; urgency=medium
1354 * add new qm command 'importovf', to create VMs from an OVF manifest
1356 * snapshot: use explicitly configured vmstate storage
1358 * config: add vmstatestorage option
1360 * VM.Snapshot.Rollback privilege added
1362 * migration : enable mtunnel for insecure migration
1364 * ovmf: deprecate old legay ovmf image and refactor
1366 * improve efidisk creation
1368 * efidisk: do not hard code efivar base image size
1370 * fix #1441: do not unplug controllers when the mirroring is finished
1372 * do not overwrite global signal handlers
1374 * update_vm: sort logged parameters
1376 * remove legacy sparsecp
1378 * remove unused obsolete vmtar
1380 * fix #1125: check for KVM support before starting VM
1382 -- Proxmox Support Team <support@proxmox.com> Thu, 5 Oct 2017 11:17:26 +0200
1384 qemu-server (5.0-15) unstable; urgency=medium
1386 * reduce migration downtime
1388 * fix freezing logic when saving vm states
1390 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Aug 2017 10:46:33 +0200
1392 qemu-server (5.0-14) unstable; urgency=medium
1394 * fix disk throttle parameters
1396 * improve compatibility when live-migrating from pve-4
1398 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Jul 2017 11:17:53 +0200
1400 qemu-server (5.0-13) unstable; urgency=medium
1402 * Fix #1417: make sure the target storage allows disk images before importing
1404 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Jul 2017 06:48:43 +0200
1406 qemu-server (5.0-12) unstable; urgency=medium
1408 * Use default values when memory is not set in vm.conf when migrating
1410 -- Proxmox Support Team <support@proxmox.com> Mon, 03 Jul 2017 14:39:25 +0200
1412 qemu-server (5.0-11) unstable; urgency=medium
1414 * Fix #1417: properly check for 'images' content type when allocating disks
1416 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Jun 2017 09:33:17 +0200
1418 qemu-server (5.0-10) unstable; urgency=medium
1420 * don't use cirrus by default for sane OS'
1422 * replication: remove guest states to ensure no old states are exists
1424 * allow disks on shared storages on replicated VMs
1426 * refuse to add non-replicatable disks to replicating VMs
1428 * config: has_feature() take default for backup into account
1430 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jun 2017 13:26:38 +0200
1432 qemu-server (5.0-9) unstable; urgency=medium
1434 * migrate: use 'mtunnel' from pvecm
1436 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 11:01:15 +0200
1438 qemu-server (5.0-8) unstable; urgency=medium
1440 * migrate: pass the with_snapshots parameter
1442 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 12:58:33 +0200
1444 qemu-server (5.0-7) unstable; urgency=medium
1446 * PVE/QemuMigrate.pm: use new replication job helpers from AbstractMigrate
1448 * Change target in replication-state when replication direction is switched
1450 * PVE/QemuMigrate.pm: use replication job, transfer replication state
1452 * add regression tests for get_replicatable_volumes
1454 * get_replicatable_volumes: fix CDROM and local file/device handling
1456 * get_replicatable_volumes: add unused volumes
1458 * get_replicatable_volumes: skip volumes if we do not 'own' them
1460 * PVE::QemuServer::foreach_volid - pass $attr hash to callback
1462 * get_replicatable_volumes: skip volumes on shared storage
1464 * PVE/API2/Qemu.pm: aquire guest_migration_lock inside worker
1466 * Add a migration lock to avoid a replication on rollback-time
1468 * change from dpkg-deb to dpkg-buildpackage
1470 * fix #1405: sort pci ids by functions
1472 * Add new qm command 'importdisk' to import external disk images
1474 * migration: implement insecure offline migration
1476 * check also pending changes when reverting/deleting
1478 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 08:50:45 +0200
1480 qemu-server (5.0-6) unstable; urgency=medium
1482 * fix burst length parameter names and pass them to qemu
1484 * fix #1229: more explicit spice port allocation
1486 * migrate: acquire guest_migration_lock during migration
1488 * do not allow destroy if there are replication jobs
1490 * use new PVE::ReplicationConfig class
1492 * improve error on '{full, linked} clone not available' error
1494 * Fix #1384: add missing decrement to calculation of socket-id
1496 * migrate: pass ssh_info to storage_migrate
1498 * tests: fix broken snapshot create tests
1500 * tests: fix broken snapshot delete tests
1502 * use ReuseAddr for vncproxy
1504 * Fix #1361: create disk: stricter parsing of storage:size
1506 * PVE::QemuServer::create_disks - run code inside eval
1508 * implement get_replicatable_volumes
1510 * add description of read/writes statistics in vzdump output
1512 * start vncproxy worker in the background
1514 -- Proxmox Support Team <support@proxmox.com> Wed, 31 May 2017 09:21:27 +0200
1516 qemu-server (5.0-5) unstable; urgency=medium
1518 * added rerror option to scsi drives
1520 * added storage replication settings
1522 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Apr 2017 14:02:08 +0200
1524 qemu-server (5.0-4) unstable; urgency=medium
1526 * fix target storage availability check for live migration with local
1529 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 12:05:58 +0200
1531 qemu-server (5.0-3) unstable; urgency=medium
1533 * fix vnc connections showing false errors
1535 * fix #1338: handle writer count limit in live migration with local disks
1538 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 11:47:07 +0200
1540 qemu-server (5.0-2) unstable; urgency=medium
1542 * fix drive mirror readyness check
1544 * fix uninitialized warning when deleting unset VM option
1546 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Apr 2017 16:27:59 +0200
1548 qemu-server (5.0-1) unstable; urgency=medium
1550 * bump version for stretch
1552 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:59:35 +0100
1554 qemu-server (4.0-109) unstable; urgency=medium
1556 * drop netcat6 dependency
1558 * fix a case where VMs refuse to start with scsi disk ids >= 7
1560 * add skylake to cpu models
1562 * improve error messages
1564 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:56:14 +0100
1566 qemu-server (4.0-109) unstable; urgency=medium
1570 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Feb 2017 11:40:53 +0100
1572 qemu-server (4.0-108) unstable; urgency=medium
1574 * #1260: convert moved template disk to base
1576 * change TLS cipher suite to HIGH for spiceterm
1578 -- Proxmox Support Team <support@proxmox.com> Tue, 31 Jan 2017 13:54:42 +0100
1580 qemu-server (4.0-107) unstable; urgency=medium
1582 * add dependency on libpve-guest-common-perl
1584 * add dependency on libpve-common-perl
1586 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:47:09 +0100
1588 qemu-server (4.0-106) unstable; urgency=medium
1590 * only use scsi-block with explicit opt-in
1592 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:19:20 +0100
1594 qemu-server (4.0-105) unstable; urgency=medium
1596 * use new PVE::Storage::check_volume_access()
1598 * Set zero $size and continue if volume_resize() returns false
1600 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Jan 2017 09:19:45 +0100
1602 qemu-server (4.0-104) unstable; urgency=medium
1604 * add setup_environment hook to CLIHandler classes
1606 * cleanup: drop superfluous condition in assignment
1608 * add romfile option to hostpci
1610 * add with-local-disks option for live storage migration
1612 * drive-mirror: bump timeout to 5s, add 30s inactivity timeout
1614 * live clone_vm: suspend or freezefs before block-job-cancel
1616 * add socat and unix socket for storage migration
1618 * add live storage migration with vm migration
1620 * clone live vm : add support for multiple jobs
1622 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Jan 2017 14:15:01 +0100
1624 qemu-server (4.0-103) unstable; urgency=medium
1626 * destroy_vm: allow vdisk_free to fail
1628 * Display volume size in log when doing a volume backup
1630 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Dec 2016 12:40:40 +0100
1632 qemu-server (4.0-102) unstable; urgency=medium
1634 * avoid "No balloon device has been activated" warnings in vmstatus
1636 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2016 10:12:55 +0100
1638 qemu-server (4.0-101) unstable; urgency=medium
1640 * allow migration of local qcow2 snapshots
1642 -- Proxmox Support Team <support@proxmox.com> Mon, 5 Dec 2016 12:38:54 +0100
1644 qemu-server (4.0-100) unstable; urgency=medium
1646 * allow insecure migrations from older qemu-servers
1648 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Dec 2016 18:50:54 +0100
1650 qemu-server (4.0-99) unstable; urgency=medium
1652 * qm agent: remove 'guest-' prefix from commands
1654 * qm agent: pass command as second required argument
1656 * qm agent: add output formatter
1658 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Dec 2016 07:58:34 +0100
1660 qemu-server (4.0-98) unstable; urgency=medium
1662 * Add "qm agent" command
1664 * increase timeout for guest-fsfreeze-freeze
1666 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2016 12:31:36 +0100
1668 qemu-server (4.0-97) unstable; urgency=medium
1670 * Add entry for windows 10 and 2016 support
1672 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2016 09:09:23 +0100
1674 qemu-server (4.0-96) unstable; urgency=medium
1676 * restrict monitor API to Sys.Modify for most commands
1678 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 10:02:37 +0100
1680 qemu-server (4.0-95) unstable; urgency=medium
1682 * vm_shutdown: request 'stopped' state for HA enabled VMs
1684 * use ha-manager 'stopped' state instead of 'disabled'
1686 * switch to 'ha-manager set' (instead of 'ha-manager start/stop')
1688 * vmstate snapshot: activate|deactivate volume
1690 * qemu_volume_snapshot_delete : fix krbd snapshot delete
1692 * VZDump/QemuServer: set bless class correctly
1694 * cleanup windows version handling and hyperv enlightments
1696 * remove unnecessary format_description properties
1698 * register new standard option 'pve-qm-image-format'
1700 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 08:11:08 +0100
1702 qemu-server (4.0-94) unstable; urgency=medium
1704 * fix docs for iops/bps_max_length throttling options
1706 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 12:53:44 +0100
1708 qemu-server (4.0-93) unstable; urgency=medium
1710 * Close #1195: support iops/bps_max_length throttling options
1712 * fix a perl warning when failing to parse a new drive string
1714 * fix a warning: discard is not a number
1716 * fix #1177: allow dedicated migration network
1718 * change default value for cpuunits to 1024
1720 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 10:26:03 +0100
1722 qemu-server (4.0-92) unstable; urgency=medium
1724 * Close #351: add more info to backup log
1726 * add qm listsnapshot call
1728 * snapshot_list: add bash completion for vmid
1730 * Fix #1174: remove pve-qm-drive
1732 * enable drive-mirror with iothread for qemu 2.7 v2
1734 * add get_running_qemu_version
1736 * cpu hotplug : add new cpu hotplug method for qemu 2.7
1738 * cpu hotplug : add coldplugged cpu to qemu command line
1740 * cpu hotplug : add print_cpu_device
1742 * numaX : use cpus option multiple time if cpulist
1744 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Oct 2016 09:13:39 +0200
1746 qemu-server (4.0-91) unstable; urgency=medium
1748 * fix #1131: activate volume before copying efidisk
1750 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Oct 2016 08:21:19 +0200
1752 qemu-server (4.0-90) unstable; urgency=medium
1754 * fix #1111: qm showcmd wrong escape sequence
1756 * Avoid to parse empty property string
1758 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2016 07:13:33 +0200
1760 qemu-server (4.0-89) unstable; urgency=medium
1762 * fix manual page (use efidisk0 instead of efidisk[N])
1764 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Sep 2016 12:21:07 +0200
1766 qemu-server (4.0-88) unstable; urgency=medium
1768 * restore: better error handling for vdisk deletion
1770 * forbid migration of template with local base image
1772 * forbid restore into existing template
1774 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Sep 2016 07:49:45 +0200
1776 qemu-server (4.0-87) unstable; urgency=medium
1778 * add seabios bootsplash and use it
1780 * add efidisk0 to config, use efidisk0 for efivars
1782 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Sep 2016 12:34:23 +0200
1784 qemu-server (4.0-86) unstable; urgency=medium
1786 * hostpci: bring back multifunction pass-through shortcut
1788 * disable drive-mirror when iothread is enabled
1790 * hugepages: map numa node IDs to host and guest correctly
1792 * hugepages: use hostnodes value as numanode for topology
1794 * qemu-img convert : use default cache=unsafe instead writeback
1796 * Fix #1057: make protection a fast-plug option
1798 * add lock check for move_disk API call
1800 * deactivate new volumes after clone to other node
1802 * pass datacenter.cfg's mac_prefix to random_ether_addr
1804 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Aug 2016 10:11:07 +0200
1806 qemu-server (4.0-85) unstable; urgency=medium
1808 * Fix #1051: typo: vpcus -> vcpus - so non-root users can change vcpus again
1810 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 14:46:43 +0200
1812 qemu-server (4.0-84) unstable; urgency=medium
1814 * fix #1046: add non-snapshotted disks as unused
1816 * fix #1040: warn early about moving a snapshotted disk
1818 * disable usb hotplug for now
1820 * remove old move disk snapshot check
1822 * improve errors when trying to migrate disks with snapshots
1824 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 11:50:01 +0200
1826 qemu-server (4.0-83) unstable; urgency=medium
1828 * Add hugepages option
1830 * Refactor various parts out of QemuServer
1832 * Include USB devices in vm_devices_list
1834 * Add usb hotplugging
1836 * Fix syntax in pve-q35.cfg
1838 * Fix #146: add name to backup log
1840 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Jun 2016 11:29:01 +0200
1842 qemu-server (4.0-82) unstable; urgency=medium
1844 * add dependency on DBus
1846 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jun 2016 11:48:45 +0200
1848 qemu-server (4.0-81) unstable; urgency=medium
1850 * Add LVM and LVMThin to QemuMigration
1852 * add check for snapshots at migration
1854 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Jun 2016 12:10:48 +0200
1856 qemu-server (4.0-80) unstable; urgency=medium
1858 * split old style pipe open call
1860 * fix #1020: remove unnecessary root check for unused disks
1862 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jun 2016 18:13:03 +0200
1864 qemu-server (4.0-79) unstable; urgency=medium
1866 * migrate: collect migration tunnel child process (avoid zombies)
1868 * migrate: use ssh forwarded UNIX socket tunnel
1870 * migrate: add some more log output
1872 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 12:16:31 +0200
1874 qemu-server (4.0-78) unstable; urgency=medium
1876 * use enter_systemd_scope instead of systemd-run
1878 * fix #1010: whitelist options for permissions
1880 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 11:42:25 +0200
1882 qemu-server (4.0-77) unstable; urgency=medium
1884 * do not ignore hotplug parse errors
1886 -- Proxmox Support Team <support@proxmox.com> Tue, 31 May 2016 12:15:55 +0200
1888 qemu-server (4.0-76) unstable; urgency=medium
1890 * allow VLAN 1 tag in qemu-kvm vms
1892 -- Proxmox Support Team <support@proxmox.com> Wed, 18 May 2016 11:25:54 +0200
1894 qemu-server (4.0-75) unstable; urgency=medium
1896 * fix #975, use new keyAlias feature.
1898 * add --description to systemd scope unit
1900 -- Proxmox Support Team <support@proxmox.com> Wed, 11 May 2016 11:15:56 +0200
1902 qemu-server (4.0-74) unstable; urgency=medium
1904 * correctly set cpu vendor
1906 * fix #971: don't activate shared storage in offline migration
1908 * migrate: check if storage is available
1910 -- Proxmox Support Team <support@proxmox.com> Sun, 01 May 2016 09:25:06 +0200
1912 qemu-server (4.0-73) unstable; urgency=medium
1914 * restore: pass format to vma extract
1916 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Apr 2016 09:03:12 +0200
1918 qemu-server (4.0-72) unstable; urgency=medium
1920 * vm_start : force systemctl stop if orphan scope exist
1922 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Apr 2016 11:09:52 +0200
1924 qemu-server (4.0-71) unstable; urgency=medium
1926 * Fix #643: activate volumes before resizing
1928 * fix #947: reenable disk/cdrom passthrough
1930 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Apr 2016 10:34:42 +0200
1932 qemu-server (4.0-70) unstable; urgency=medium
1934 * vm_status: return more verbose HA state
1936 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Apr 2016 09:01:24 +0200
1938 qemu-server (4.0-69) unstable; urgency=medium
1940 * Fix #848: deactivate old volume after clone before deletion
1942 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Apr 2016 08:24:49 +0200
1944 qemu-server (4.0-68) unstable; urgency=medium
1946 * change shutdown behaviour on suspended vm
1948 -- Proxmox Support Team <support@proxmox.com> Tue, 12 Apr 2016 17:19:20 +0200
1950 qemu-server (4.0-67) unstable; urgency=medium
1952 * use pve-doc-generator to generate man pages
1954 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Apr 2016 07:37:16 +0200
1956 qemu-server (4.0-66) unstable; urgency=medium
1958 * use generic property string parser
1960 * drive schema: allow 'none' again
1962 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Apr 2016 09:33:16 +0200
1964 qemu-server (4.0-65) unstable; urgency=medium
1966 * cfg: use the 'urlencoded' format for drive model and serial
1968 * clone: use the zeroinit filter for sparseinit storages
1970 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Mar 2016 09:09:07 +0100
1972 qemu-server (4.0-64) unstable; urgency=medium
1974 * Use AbstractConfig for Qemu
1976 * fix #909: pass rate to tap_plug()
1978 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Mar 2016 11:43:28 +0100
1980 qemu-server (4.0-63) unstable; urgency=medium
1982 * only perform scsi inquiry on device nodes
1984 -- Proxmox Support Team <support@proxmox.com> Sat, 27 Feb 2016 10:20:50 +0100
1986 qemu-server (4.0-62) unstable; urgency=medium
1988 * fix undefined value when starting a q35 machine VM
1990 * kvm_user_version: update code to use our framework
1992 * Refactor has_feature
1994 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Feb 2016 17:02:34 +0100
1996 qemu-server (4.0-61) unstable; urgency=medium
1998 * clone_vm : only deactivate sources volume if source vm if offline
2000 * Refactor snapshot_create to match LXC.pm
2002 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Feb 2016 08:48:59 +0100
2004 qemu-server (4.0-60) unstable; urgency=medium
2006 * change check for write-zeros
2008 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Feb 2016 17:19:12 +0100
2010 qemu-server (4.0-59) unstable; urgency=medium
2012 * qemu_machine_pxe : return $machine if no pxe
2014 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Feb 2016 17:37:11 +0100
2016 qemu-server (4.0-58) unstable; urgency=medium
2018 * deactivate volumes if vm start command fails
2020 -- Proxmox Support Team <support@proxmox.com> Sat, 20 Feb 2016 10:26:28 +0100
2022 qemu-server (4.0-57) unstable; urgency=medium
2024 * delete ram state files when restoring a backup
2026 * Refactor snapshot code
2028 * disable vnc server and add -nographic is no vga card is present
2030 * passthrough : reenable hyperv and add hv_vendor_id for windows
2032 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Feb 2016 12:47:51 +0100
2034 qemu-server (4.0-56) unstable; urgency=medium
2036 * If we freeze the fs with the Qemu-Guest-Agent test if QGA is running.
2038 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2016 12:51:19 +0100
2040 qemu-server (4.0-55) unstable; urgency=medium
2042 * improve usb config parsing
2044 * Refactor update_config_nolock -> write_config
2046 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Feb 2016 12:07:56 +0100
2048 qemu-server (4.0-54) unstable; urgency=medium
2050 * restore: deal with new backup=0 property string
2052 * add usb3 option for usb-devices
2054 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Feb 2016 17:49:19 +0100
2056 qemu-server (4.0-53) unstable; urgency=medium
2058 * pass $skiplock all the way through to destroy_vm
2060 -- Proxmox Support Team <support@proxmox.com> Mon, 08 Feb 2016 11:53:03 +0100
2062 qemu-server (4.0-52) unstable; urgency=medium
2064 * close tunnel after migration is finish.
2066 -- Proxmox Support Team <support@proxmox.com> Tue, 02 Feb 2016 18:16:47 +0100
2068 qemu-server (4.0-51) unstable; urgency=medium
2070 * Fix #878: disk-size format
2072 * Fix #879: exclusion of disk for backup
2074 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Jan 2016 10:04:41 +0100
2076 qemu-server (4.0-50) unstable; urgency=medium
2078 * add hidden option to cpu type
2080 * fix PVE::HA use clause so HA resources get registered
2082 * Create firewall dir on VM restore
2084 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 16:57:43 +0100
2086 qemu-server (4.0-49) unstable; urgency=medium
2088 * increase version to update test environment
2090 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 12:50:07 +0100
2092 qemu-server (4.0-48) unstable; urgency=medium
2094 * use safe_string_ne for trunks
2096 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Jan 2016 16:58:23 +0100
2098 qemu-server (4.0-47) unstable; urgency=medium
2100 * add support for network trunks
2102 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jan 2016 17:27:32 +0100
2104 qemu-server (4.0-46) unstable; urgency=medium
2106 * Closes #787: add Haswell-noTSX and Broadwell-noTSX cpu types
2108 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 16:42:05 +0100
2110 qemu-server (4.0-45) unstable; urgency=medium
2112 * io throttle: pass pool parameters (*_max)
2114 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 06:17:52 +0100
2116 qemu-server (4.0-44) unstable; urgency=medium
2118 * ovmf : don't pass x-vga to vfio-pci
2120 * check for quorum when starting a VM
2122 -- Proxmox Support Team <support@proxmox.com> Sun, 10 Jan 2016 15:11:43 +0100
2124 qemu-server (4.0-43) unstable; urgency=medium
2126 * disable hyper-v enlightment when xvga is enabled
2128 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Jan 2016 06:26:31 +0100
2130 qemu-server (4.0-42) unstable; urgency=medium
2132 * add detect_zeroes option
2134 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Dec 2015 09:20:18 +0100
2136 qemu-server (4.0-41) unstable; urgency=medium
2138 * add new option to select BIOS (--bios <seabios|ovmf>)
2140 * fix bug #841: replace get_used_paths with is_volume_in_use
2142 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 11:15:23 +0100
2144 qemu-server (4.0-40) unstable; urgency=medium
2146 * qm: Add VMID auto completion to some commands
2148 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Dec 2015 12:22:25 +0100
2150 qemu-server (4.0-39) unstable; urgency=medium
2152 * fix bug #828: activate disks before hotplugging them
2154 * fix bug #783: set KillMode=none, so that systemd don't kill
2157 * reenable steal time
2159 * backup/restore firewall config with vzdump
2161 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Nov 2015 16:50:11 +0100
2163 qemu-server (4.0-38) unstable; urgency=medium
2165 * Don't treat serial devices as a local resource if they
2168 * qemu_img_convert: activate source volume
2170 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Nov 2015 07:02:01 +0100
2172 qemu-server (4.0-37) unstable; urgency=medium
2174 * add pve-bridge-hotplug script
2176 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 16:24:44 +0100
2178 qemu-server (4.0-36) unstable; urgency=medium
2180 * use qom-get to check if old pxe network rom file are used
2182 * migration: improve ipv6 case
2184 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 07:56:14 +0100
2186 qemu-server (4.0-35) unstable; urgency=medium
2188 * clone: use a fullclone hash instead of $drive->{full}
2190 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Oct 2015 07:06:47 +0100
2192 qemu-server (4.0-34) unstable; urgency=medium
2194 * use old netdevice bios files for older machine types (<= 2.4)
2196 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2015 09:08:49 +0100
2198 qemu-server (4.0-31) unstable; urgency=medium
2200 * migrate : add nocheck for resume
2202 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2015 12:41:43 +0200
2204 qemu-server (4.0-30) unstable; urgency=medium
2206 * qmrestore: implement bash completion
2208 * create: add better check for unused IDs
2210 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Oct 2015 13:13:07 +0200
2212 qemu-server (4.0-29) unstable; urgency=medium
2214 * support serial numbers and models for disks
2216 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Sep 2015 10:56:30 +0200
2218 qemu-server (4.0-28) unstable; urgency=medium
2220 * disable kvm_steal_time, because it's currently buggy with live migration
2222 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 07:14:44 +0200
2224 qemu-server (4.0-27) unstable; urgency=medium
2226 * allow to change boot order with VM.Config.Options privileges
2228 -- Proxmox Support Team <support@proxmox.com> Sat, 26 Sep 2015 11:07:11 +0200
2230 qemu-server (4.0-26) unstable; urgency=medium
2232 * migration: disable compress (already default)
2234 * migration: enable xbzrle
2236 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Sep 2015 17:59:30 +0200
2238 qemu-server (4.0-25) unstable; urgency=medium
2240 * fix kvm version parser for CVE stable releases
2242 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Sep 2015 11:48:09 +0200
2244 qemu-server (4.0-24) unstable; urgency=medium
2246 * improve VM protection mode
2248 * pci passthough : make vfio default
2250 * fix error message: allocate to much v-CPUs
2252 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Sep 2015 12:28:19 +0200
2254 qemu-server (4.0-23) unstable; urgency=medium
2256 * destroy: avoid warning about undefined 'protection' value
2258 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Sep 2015 09:38:30 +0200
2260 qemu-server (4.0-22) unstable; urgency=medium
2262 * add possibility to restore backup on rbd in krbd mode
2264 * add krbd support to online snapshot
2266 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Sep 2015 07:55:31 +0200
2268 qemu-server (4.0-21) unstable; urgency=medium
2270 * qm: implement bash completion
2272 * add VM protection mode
2274 * fix move_disk on RBD
2276 * add HA resources check before destroying a VM
2278 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Sep 2015 10:51:05 +0200
2280 qemu-server (4.0-20) unstable; urgency=medium
2282 * fix start kvm with os type 'other'
2284 * spice console: fix 'uninitialized value in concat' due to unnamed VM
2286 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Aug 2015 11:39:52 +0200
2288 qemu-server (4.0-19) unstable; urgency=medium
2290 * clone: also copy vm firewall config file
2292 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Aug 2015 06:50:04 +0200
2294 qemu-server (4.0-18) unstable; urgency=medium
2296 * fix bug #688: if vm is not owner of this disk remove from config
2298 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2015 12:30:52 +0200
2300 qemu-server (4.0-17) unstable; urgency=medium
2302 * fix bug #603: vmid.fw file not deleted
2304 * fix bug #517: improve error message
2306 * adapt /config and /pending API calls to force-delete
2308 -- Proxmox Support Team <support@proxmox.com> Wed, 19 Aug 2015 15:44:53 +0200
2310 qemu-server (4.0-16) unstable; urgency=medium
2312 * remove vm access permissions after destroy
2314 * pending-delete: remember force-deletes
2316 * correctly handle empty description in pending section
2318 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Aug 2015 08:09:44 +0200
2320 qemu-server (4.0-15) unstable; urgency=medium
2322 * Fixed wrong UUID in Qemu VZDump backup
2324 * add memory_unplug support V2
2326 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jul 2015 11:32:51 +0200
2328 qemu-server (4.0-14) unstable; urgency=medium
2330 * fixed bug 662: wrong subroutine for parsing startup order
2332 * cpuflags : don't enforce with tcg mode
2334 * cpuflags : remove enforce for cpumodel=host
2336 * cpuflags : remove -rdtscp for Opteron cpu models
2338 * vzdump : abord backup if disk have iothread enabled
2340 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Jul 2015 13:24:31 +0200
2342 qemu-server (4.0-13) unstable; urgency=medium
2344 * drive-mirror: now allow interrupts at the scanning bitmap phase
2346 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Jul 2015 06:40:52 +0200
2348 qemu-server (4.0-12) unstable; urgency=medium
2350 * remove outdated host_device format
2352 * parse_drive: do not overwrite configured format
2354 * fix aio O_DIRECT check for cdrom drives
2356 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Jun 2015 10:32:09 +0200
2358 qemu-server (4.0-11) unstable; urgency=medium
2360 * activate-noawait pve-api-updates
2362 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Jun 2015 12:36:15 +0200
2364 qemu-server (4.0-10) unstable; urgency=medium
2366 * implement cgroups through systemd-run
2368 * implement hotplug for cpuunits
2370 * remove old openvz fairscheduler code
2372 -- Proxmox Support Team <support@proxmox.com> Fri, 29 May 2015 08:24:33 +0200
2374 qemu-server (4.0-9) unstable; urgency=medium
2376 * qmp drive-mirror : set big timeout
2378 * qemu-mirror : block job complete : use ready flag
2380 -- Proxmox Support Team <support@proxmox.com> Tue, 12 May 2015 08:19:38 +0200
2382 qemu-server (4.0-8) unstable; urgency=medium
2384 * trigger pve-api-updates event
2386 -- Proxmox Support Team <support@proxmox.com> Tue, 05 May 2015 14:57:55 +0200
2388 qemu-server (4.0-7) unstable; urgency=medium
2390 * cleanup: use new standard option 'pve-startup-order'
2392 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Apr 2015 10:04:04 +0200
2394 qemu-server (4.0-6) unstable; urgency=medium
2396 * fix ha resource names
2398 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Apr 2015 13:11:12 +0200
2400 qemu-server (4.0-5) unstable; urgency=medium
2402 * use new pve-ha-manager
2404 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Mar 2015 12:48:41 +0100
2406 qemu-server (4.0-4) unstable; urgency=medium
2408 * add qemu cpu flags optimisations for kernel 3.10
2410 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Mar 2015 08:58:56 +0100
2412 qemu-server (4.0-3) unstable; urgency=medium
2414 * vmstatus: use vcpus if defined
2416 * balloon: use qom-get for guest balloon statistics
2418 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2015 08:22:47 +0100
2420 qemu-server (4.0-2) unstable; urgency=medium
2422 * drive_add: escape \ character
2424 * bugfix: allow manual balloning if shares = 0
2426 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2015 10:21:52 +0100
2428 qemu-server (4.0-1) unstable; urgency=medium
2430 * updated for debian jessie
2432 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Feb 2015 13:00:56 +0100
2434 qemu-server (3.3-20) unstable; urgency=low
2436 * correctly set an remove lock (fix "qm unlock")
2438 -- Proxmox Support Team <support@proxmox.com> Sun, 15 Feb 2015 09:05:40 +0100
2440 qemu-server (3.3-19) unstable; urgency=low
2442 * commit pending values when changing CDROM
2444 -- Proxmox Support Team <support@proxmox.com> Sat, 14 Feb 2015 09:24:03 +0100
2446 qemu-server (3.3-18) unstable; urgency=low
2448 * bugfix : add missing queues nic option in print_net
2450 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Feb 2015 09:05:21 +0100
2452 qemu-server (3.3-17) unstable; urgency=low
2456 * This fix hotplug for devices behind bridges
2458 * check possibility to rollback a snapshot early
2460 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Feb 2015 08:19:02 +0100
2462 qemu-server (3.3-16) unstable; urgency=low
2464 * QemuServer: fix wrong binding of pci root ports, bridges or switches
2467 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2015 06:32:14 +0100
2469 qemu-server (3.3-15) unstable; urgency=low
2471 * code cleanup: add foreach_dimm sub
2473 * hotplug: memory hotplug option is not hotpluggable
2475 * fix bug 597: hotplug fix
2477 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Feb 2015 07:05:05 +0100
2479 qemu-server (3.3-14) unstable; urgency=low
2481 * include memory hotplug patch
2483 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jan 2015 07:11:10 +0100
2485 qemu-server (3.3-13) unstable; urgency=low
2487 * hotplug config: allow to enable specific features
2489 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Jan 2015 12:39:21 +0100
2491 qemu-server (3.3-12) unstable; urgency=low
2493 * add new vcpus option
2495 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jan 2015 08:04:44 +0100
2497 qemu-server (3.3-11) unstable; urgency=low
2499 * enable hotplug by default
2501 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jan 2015 08:53:10 +0100
2503 qemu-server (3.3-10) unstable; urgency=low
2505 * Support additional e1000 variants for VM machines
2507 * Add link_down flag to network config
2509 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jan 2015 07:15:48 +0100
2511 qemu-server (3.3-9) unstable; urgency=low
2513 * pending api : fix parsing 0 value
2515 * fix test for ballon hotplug
2517 * set boot strict=on to prevent booting from not listed boot devices
2519 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Jan 2015 06:23:10 +0100
2521 qemu-server (3.3-8) unstable; urgency=low
2523 * new 'pending changes' API
2525 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Jan 2015 13:32:46 +0100
2527 qemu-server (3.3-7) unstable; urgency=low
2529 * vzdump: use qga freeze in vzdump in snapshot mode
2531 * add custom numa topology support
2533 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Dec 2014 17:24:24 +0100
2535 qemu-server (3.3-6) unstable; urgency=low
2537 * API change: snapshot_create - remove unused freezefs flag.
2539 * snapshot_create: call fsfreeze if agent flag is set
2541 * qmpclient: use guest-sync-delimited
2543 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Dec 2014 12:34:50 +0100
2545 qemu-server (3.3-5) unstable; urgency=low
2547 * drive-mirror: cleanups, avoid division by zero bug
2549 * shutdown by Qemu Guest Agent if the agent flag is set
2551 * savevm-end : wait that savevm is finished
2553 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Dec 2014 09:31:17 +0100
2555 qemu-server (3.3-4) unstable; urgency=low
2557 * serial: allow to pass arbitrary device names
2559 * Add check if host has enough real CPUs for starting VM
2561 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Nov 2014 07:42:10 +0100
2563 qemu-server (3.3-3) unstable; urgency=low
2565 * drive-mirror: further improvments
2567 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Nov 2014 06:32:04 +0100
2569 qemu-server (3.3-2) unstable; urgency=low
2571 * drive-mirror: wait that busy eq false before block-job-complete
2573 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Nov 2014 15:35:55 +0100
2575 qemu-server (3.3-1) unstable; urgency=low
2577 * enable write zeroes optimisations
2579 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Oct 2014 10:35:49 +0200
2581 qemu-server (3.1-35) unstable; urgency=low
2583 * fix bug #542: return VMID as integer
2585 -- Proxmox Support Team <support@proxmox.com> Wed, 17 Sep 2014 15:52:34 +0200
2587 qemu-server (3.1-34) unstable; urgency=low
2589 * hotplug: allow scsi and virtio-scsi disk hotplug|unplug
2591 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Sep 2014 11:35:49 +0200
2593 qemu-server (3.1-33) unstable; urgency=low
2595 * clone_vm: auto generate new uuid
2597 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Aug 2014 09:23:58 +0200
2599 qemu-server (3.1-32) unstable; urgency=low
2601 * add Broadwell cpu model
2603 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2014 12:21:08 +0200
2605 qemu-server (3.1-31) unstable; urgency=low
2607 * fix bug 529: fix virtio-serial when using q35 machines
2609 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Aug 2014 06:17:08 +0200
2611 qemu-server (3.1-30) unstable; urgency=low
2613 * bump max hostpci to 4
2615 * set vga=none if x-vga passthrough is enabled
2617 -- Proxmox Support Team <support@proxmox.com> Wed, 06 Aug 2014 09:41:36 +0200
2619 qemu-server (3.1-29) unstable; urgency=low
2621 * vm_stop: do not use ha commands if $migratedfrom is set
2623 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jul 2014 06:53:05 +0200
2625 qemu-server (3.1-28) unstable; urgency=low
2627 * disable kvm cpu signature if x-vga is enabled
2629 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jul 2014 06:52:25 +0200
2631 qemu-server (3.1-27) unstable; urgency=low
2633 * pci passthrough: Reset device only if has_fl_reset is defined
2635 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jul 2014 06:11:49 +0200
2637 qemu-server (3.1-26) unstable; urgency=low
2639 * enable linked clones from snapshots (ceph)
2641 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jul 2014 09:28:47 +0200
2643 qemu-server (3.1-25) unstable; urgency=low
2645 * allow resize of virtio windows boot disk (virtio-win-0.1-74 have
2646 fixed the resize bug)
2648 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jul 2014 12:48:03 +0200
2650 qemu-server (3.1-24) unstable; urgency=low
2652 * new option smbios1: specify SMBIOS type 1 fields (uuid, ...)
2654 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Jun 2014 11:13:27 +0200
2656 qemu-server (3.1-23) unstable; urgency=low
2658 * vncproxy: remove check if VM is running
2660 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:56:02 +0200
2662 qemu-server (3.1-22) unstable; urgency=low
2664 * hostpci: add pci multifunction support
2666 * hostpci: add pcie and x-vga passthrough
2668 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:31:30 +0200
2670 qemu-server (3.1-21) unstable; urgency=low
2672 * protect websocket API with vncticket
2674 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Jun 2014 17:43:25 +0200
2676 qemu-server (3.1-20) unstable; urgency=low
2678 * vncwebsocket: do not proxy connection (not required)
2680 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 12:45:39 +0200
2682 qemu-server (3.1-19) unstable; urgency=low
2684 * do not depend on novnc-pve package (use new HTTPServer feature instead)
2686 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 11:04:48 +0200
2688 qemu-server (3.1-18) unstable; urgency=low
2690 * depend on novnc-pve package
2692 * support webockets for VNC console
2694 * migration : add setup state
2696 * add virtio-net multiqueue support
2698 * add firewall option to qemu network interface
2700 * add initiator-name to iscsi drives if configured
2702 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jun 2014 09:00:03 +0200
2704 qemu-server (3.1-17) unstable; urgency=low
2706 * depend on pve-firewall package
2708 -- Proxmox Support Team <support@proxmox.com> Tue, 06 May 2014 11:28:26 +0200
2710 qemu-server (3.1-16) unstable; urgency=low
2712 * fix bug #502: allow creation of empty vma archives
2714 * fix bug #510: move_disk - don't delete disk if used in a previous snasphot
2716 * qmrestore: removed short timeout
2718 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Apr 2014 09:29:26 +0200
2720 qemu-server (3.1-15) unstable; urgency=low
2722 * correctly disable unwanted migrate features (xbzrle).
2724 * QemuMigrate: print migration xbzrle if enabled
2726 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2014 08:06:29 +0100
2728 qemu-server (3.1-14) unstable; urgency=low
2730 * Add title of VM to Spice Client
2732 * deactivate volume after move_disk
2734 * add cpu_hotplug (and maxcpus config)
2736 * migration : enable auto-converge capability
2738 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Jan 2014 06:49:16 +0100
2740 qemu-server (3.1-13) unstable; urgency=low
2742 * pci passthrough: new option to disable device ROM (rombar=off)
2744 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Dec 2013 11:45:46 +0100
2746 qemu-server (3.1-12) unstable; urgency=low
2748 * spiceproxy: use POST instead of GET
2750 -- Proxmox Support Team <support@proxmox.com> Tue, 10 Dec 2013 10:49:30 +0100
2752 qemu-server (3.1-11) unstable; urgency=low
2754 * depend on pve-qemu-kvm >= 1.7-1
2756 * fix 'qm unlink' command syntax
2758 * add 'pvscsi' to the list of scsi controllers (emulate the VMware
2761 * add 'lsi53c810' to the list of scsi controllers (supported on some
2762 very old Windows NT versions)
2764 * add 'vmxnet3' to the list of available network card models (emulate
2765 VMware paravirtualized network card)
2767 * add drive option 'discard'
2769 * add support for new qemu throttling burst max parameters.
2771 -- Proxmox Support Team <support@proxmox.com> Tue, 03 Dec 2013 10:48:33 +0100
2773 qemu-server (3.1-10) unstable; urgency=low
2775 * add +lahf_lm flag to kvm64 cpudef
2777 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Nov 2013 09:18:39 +0100
2779 qemu-server (3.1-9) unstable; urgency=low
2781 * clone: deactivate volumes after clone to other node
2783 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Nov 2013 08:17:35 +0100
2785 qemu-server (3.1-8) unstable; urgency=low
2787 * clone: correctly check drive options (avoid feature is not available bug)
2789 -- Proxmox Support Team <support@proxmox.com> Mon, 14 Oct 2013 07:36:26 +0200
2791 qemu-server (3.1-7) unstable; urgency=low
2793 * spice: add multi-monitors support
2795 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Oct 2013 09:13:23 +0200
2797 qemu-server (3.1-6) unstable; urgency=low
2799 * use new PVE::Storage::abs_filesystem_path()
2801 * use warnings instead of global -w flag
2803 -- Proxmox Support Team <support@proxmox.com> Tue, 01 Oct 2013 12:42:42 +0200
2805 qemu-server (3.1-5) unstable; urgency=low
2807 * introduce new ostype 'solaris' (run without x2apic).
2809 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Sep 2013 06:55:33 +0200
2811 qemu-server (3.1-4) unstable; urgency=low
2813 * qemu migrate : only wait for spice server online + eval
2815 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Sep 2013 06:29:39 +0200
2817 qemu-server (3.1-3) unstable; urgency=low
2819 * speedup restore on glusterfs (do not write zero bytes)
2821 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Sep 2013 09:13:34 +0200
2823 qemu-server (3.1-2) unstable; urgency=low
2825 * Allow VMAdmin/DatastoreUser to delete disk
2827 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Sep 2013 07:48:07 +0200
2829 qemu-server (3.1-1) unstable; urgency=low
2831 * allow pass through of usb parallel devices (--parallel0 /dev/usb/lp0)
2833 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Aug 2013 12:20:23 +0200
2835 qemu-server (3.0-30) unstable; urgency=low
2837 * fix bugs in migration code (wrong qw() usage)
2839 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Aug 2013 09:49:20 +0200
2841 qemu-server (3.0-29) unstable; urgency=low
2843 * vncproxy: load config from correct node
2845 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Aug 2013 08:15:59 +0200
2847 qemu-server (3.0-28) unstable; urgency=low
2849 * allow to use a socket for serial devices
2851 * implement 'qm terminal' to open terminal via serial device
2853 * add ability to run without graphic card ('vga: serial[n]')
2855 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Aug 2013 10:05:35 +0200
2857 qemu-server (3.0-27) unstable; urgency=low
2859 * add support for unsecure/fast migration (setting in datacenter.cfg)
2861 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Jul 2013 11:24:36 +0200
2863 qemu-server (3.0-26) unstable; urgency=low
2865 * remove spice cert paths (depend on pve-qemu-kvm >= 1.4-16)
2867 * implement spice seamless migration
2869 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2013 10:08:33 +0200
2871 qemu-server (3.0-25) unstable; urgency=low
2873 * support usb redirection devices for spice (usb[n]: spice)
2875 * disable tablet device by default for spice
2877 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jul 2013 09:38:25 +0200
2879 qemu-server (3.0-24) unstable; urgency=low
2881 * spiceproxy API: allow client to choose proxy address
2883 * spiceproxy API: read cert subject name directly using Net::SSLeay
2885 * spice: use TLS (encrypt whole traffic)
2887 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Jul 2013 08:14:46 +0200
2889 qemu-server (3.0-23) unstable; urgency=low
2891 * allow to pass SCSI generic devices to guests, for example "scsi0: /dev/sg5"
2893 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jul 2013 06:49:45 +0200
2895 qemu-server (3.0-22) unstable; urgency=low
2897 * cpu flags optimization
2899 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Jul 2013 09:14:49 +0200
2901 qemu-server (3.0-21) unstable; urgency=low
2903 * add support for SPICE
2905 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Jun 2013 13:15:48 +0200
2907 qemu-server (3.0-20) unstable; urgency=low
2909 * new API to update VM config: this one is fully asynchronous.
2911 * snapshot rollback: use pc-i440fx-1.4 as default
2913 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Jun 2013 11:44:16 +0200
2915 qemu-server (3.0-19) unstable; urgency=low
2917 * config: implement new 'machine' configuration
2919 * migrate: pass --machine parameter to remote 'qm start' command
2921 * snapshot: store/use 'machine' confifiguration
2923 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Jun 2013 10:27:47 +0200
2925 qemu-server (3.0-18) unstable; urgency=low
2927 * imlement delete flag for move_disk
2929 * API: rename move to move_disk
2931 -- Proxmox Support Team <support@proxmox.com> Fri, 31 May 2013 10:57:50 +0200
2933 qemu-server (3.0-17) unstable; urgency=low
2935 * implement storage migration ("qm move")
2937 -- Proxmox Support Team <support@proxmox.com> Wed, 29 May 2013 13:01:16 +0200
2939 qemu-server (3.0-16) unstable; urgency=low
2941 * fix bug 395: correctly handle unused disk with storage alias
2943 * fix unused disk handling (do not hide unused disks when used with snapshot).
2945 -- Proxmox Support Team <support@proxmox.com> Tue, 28 May 2013 12:23:12 +0200
2947 qemu-server (3.0-15) unstable; urgency=low
2949 * qemu_img_format : use raw for as default for other storage
2951 -- Proxmox Support Team <support@proxmox.com> Thu, 23 May 2013 11:33:47 +0200
2953 qemu-server (3.0-14) unstable; urgency=low
2955 * fix bug #389: avoid error if balloon is undefined
2957 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2013 07:17:38 +0200
2959 qemu-server (3.0-13) unstable; urgency=low
2961 * fix bug #391 - restore: test if requested format is supported
2963 -- Proxmox Support Team <support@proxmox.com> Tue, 21 May 2013 12:03:56 +0200
2965 qemu-server (3.0-12) unstable; urgency=low
2967 * use add_vm_to_pool/remove_vm_from_pool from PVE::AccessControl
2969 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 12:02:41 +0200
2971 qemu-server (3.0-11) unstable; urgency=low
2973 * clone disk : keep source volume params
2975 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 10:18:21 +0200
2977 qemu-server (3.0-10) unstable; urgency=low
2979 * fix bug #381: use PVE::Tools::next_migrate_port()
2981 * clone: check is we can clone to target storage
2983 -- Proxmox Support Team <support@proxmox.com> Mon, 13 May 2013 07:31:47 +0200
2985 qemu-server (3.0-9) unstable; urgency=low
2987 * restore: do not restore template flag
2989 -- Proxmox Support Team <support@proxmox.com> Wed, 08 May 2013 10:23:49 +0200
2991 qemu-server (3.0-8) unstable; urgency=low
2993 * qemu_img_format: use 'raw' for lvm
2995 * drive-mirror : die if stats are empty
2997 * set long timeout for query-block-jobs
2999 -- Proxmox Support Team <support@proxmox.com> Tue, 07 May 2013 10:19:19 +0200
3001 qemu-server (3.0-7) unstable; urgency=low
3003 * has_feature: return list of allowed nodes
3005 -- Proxmox Support Team <support@proxmox.com> Mon, 06 May 2013 08:58:35 +0200
3007 qemu-server (3.0-6) unstable; urgency=low
3009 * fix bug #379 - restore: allow to overwrite existing VMs if user has
3010 VM.Backup permissions
3012 -- Proxmox Support Team <support@proxmox.com> Fri, 03 May 2013 07:53:40 +0200
3014 qemu-server (3.0-5) unstable; urgency=low
3016 * implement shared file locks
3018 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Apr 2013 11:35:01 +0200
3020 qemu-server (3.0-4) unstable; urgency=low
3022 * fix bug 377: make qm rescan work properly
3024 * avoid endless loop in QMPClient
3026 * use vm create permissions for templates
3028 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Apr 2013 07:59:28 +0200
3030 qemu-server (3.0-3) unstable; urgency=low
3032 * allow sparse restore for sheepdog and rbd
3034 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Apr 2013 06:21:40 +0200
3036 qemu-server (3.0-2) unstable; urgency=low
3038 * fix warnings in syslog
3040 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Mar 2013 06:25:12 +0100
3042 qemu-server (3.0-1) unstable; urgency=low
3044 * start 3.0 development
3046 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Mar 2013 11:39:08 +0100
3048 qemu-server (2.3-17) unstable; urgency=low
3050 * fix backup-cancel timeout
3052 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:58:58 +0100
3054 qemu-server (2.3-16) unstable; urgency=low
3056 * vncproxy (another try): wait max 10s for the socket if it does not
3059 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 06:42:36 +0100
3061 qemu-server (2.3-15) unstable; urgency=low
3063 * revert vncproxy change because it breaks console on remote hosts.
3065 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 12:53:59 +0100
3067 qemu-server (2.3-14) unstable; urgency=low
3069 * bugfix #340 : don't set cache=none to cdrom
3071 * Migrate: fix check if a backing file exist
3073 * vncproxy: wait max 10s for the socket if it does not exist
3075 * vzdump: improve error reporting
3077 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 06:21:30 +0100
3079 qemu-server (2.3-13) unstable; urgency=low
3081 * set cache=none by default
3083 -- Proxmox Support Team <support@proxmox.com> Mon, 25 Feb 2013 06:12:14 +0100
3085 qemu-server (2.3-12) unstable; urgency=low
3087 * disable hotplug by default (revert previous change)
3089 * disable usb2 controller by default (revert previous change)
3091 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Feb 2013 09:52:13 +0100
3093 qemu-server (2.3-11) unstable; urgency=low
3095 * fix backup parameters for pve-qemu-kvm 1.4-4
3097 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Feb 2013 10:47:55 +0100
3099 qemu-server (2.3-10) unstable; urgency=low
3101 * enable hotplug by default
3103 * enable usb2 controller by default
3105 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Feb 2013 10:45:28 +0100
3107 qemu-server (2.3-9) unstable; urgency=low
3109 * depend on pve-qemu-kvm >= 1.4-1
3111 * qemu 1.4 fix : rename stats-polling-interval to
3112 guest-stats-polling-interval
3114 * remove expected_downtime from migration status (not set in qemu 1.4,
3117 * do not set cache=none for .raw files - use qemu default instead
3120 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Feb 2013 10:38:13 +0100
3122 qemu-server (2.3-8) unstable; urgency=low
3124 * fix tar restore: correctly check if VM config already exists
3126 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Jan 2013 09:53:12 +0100
3128 qemu-server (2.3-7) unstable; urgency=low
3130 * allow to suspend/resume VM during backup
3132 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jan 2013 10:25:17 +0100
3134 qemu-server (2.3-6) unstable; urgency=low
3136 * fix bug #315: cancel backup before stopping the VM
3138 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jan 2013 13:22:58 +0100
3140 qemu-server (2.3-5) unstable; urgency=low
3142 * fix bug #307: correctly restore disk settings
3144 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Jan 2013 06:48:48 +0100
3146 qemu-server (2.3-4) unstable; urgency=low
3148 * qmrestore vma files: when restoring to same VMID, only remove volumes
3149 contained in backup - other volumes will be still available as
3150 'unused' disks. Note: tar restore still removes all volumes.
3152 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Jan 2013 07:02:00 +0100
3154 qemu-server (2.3-3) unstable; urgency=low
3156 * fix Bug #293: CDROM size not reset when set to use no media
3158 * set migrate_downtime default value to 0.1 (and use float instead of int)
3160 * implement dynamic migration_downtime
3162 * allow manual ballooning if shares is set to zero
3164 * new api2 call: vm_feature (test support for snapshots/clone feature)
3166 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Jan 2013 06:31:38 +0100
3168 qemu-server (2.3-2) unstable; urgency=low
3170 * use memory info from ballon driver (if enabled)
3172 -- Proxmox Support Team <support@proxmox.com> Tue, 18 Dec 2012 12:51:57 +0100
3174 qemu-server (2.3-1) unstable; urgency=low
3176 * include new qemu backup feature
3178 -- Proxmox Support Team <support@proxmox.com> Wed, 12 Dec 2012 15:14:59 +0100
3180 qemu-server (2.0-71) unstable; urgency=low
3182 * show better error message if bridge does not exist
3184 * QMPClient: support fdsets
3186 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Dec 2012 11:17:47 +0100
3188 qemu-server (2.0-70) unstable; urgency=low
3190 * fix version parser for qemu 1.3
3192 * add new cpu types: SandyBridge Haswell Opteron_G4 Opteron_G5
3194 * remove rhel specific cpu types: cpu64-rhel6 cpu64-rhel5
3196 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2012 07:45:19 +0100
3198 qemu-server (2.0-69) unstable; urgency=low
3200 * fix ballon monitor command (use bytes instead of MBs)
3202 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Nov 2012 06:13:46 +0100
3204 qemu-server (2.0-68) unstable; urgency=low
3206 * vzdump: store drive in correct order (sort) to avoid confusion
3208 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Nov 2012 06:25:33 +0100
3210 qemu-server (2.0-67) unstable; urgency=low
3212 * fix allocation size in qmrestore
3214 -- Proxmox Support Team <support@proxmox.com> Sat, 03 Nov 2012 07:54:06 +0100
3216 qemu-server (2.0-66) unstable; urgency=low
3218 * vzdump: restore sata drives correctly
3220 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Nov 2012 07:43:16 +0100
3222 qemu-server (2.0-65) unstable; urgency=low
3224 * remove hardcoded blowfish cipher
3226 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Oct 2012 13:58:27 +0100
3228 qemu-server (2.0-64) unstable; urgency=low
3230 * fix memory leak in QMP Client (many thanks to Stefan!)
3232 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Oct 2012 12:14:51 +0100
3234 qemu-server (2.0-63) unstable; urgency=low
3238 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Oct 2012 10:00:50 +0200
3240 qemu-server (2.0-62) unstable; urgency=low
3242 * vncproxy: wait until vnc port is ready
3244 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Oct 2012 08:58:52 +0200
3246 qemu-server (2.0-61) unstable; urgency=low
3248 * add 'win8' ostype (same defaults as win7 for now)
3250 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Oct 2012 09:35:27 +0200
3252 qemu-server (2.0-60) unstable; urgency=low
3254 * fix bug 258: use bridge mtu for tap interfaces
3256 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Oct 2012 12:26:42 +0200
3258 qemu-server (2.0-59) unstable; urgency=low
3260 * disable vzdump for VM containing snapshots
3262 -- Proxmox Support Team <support@proxmox.com> Thu, 27 Sep 2012 09:41:19 +0200
3264 qemu-server (2.0-58) unstable; urgency=low
3266 * fix bug 251: use new command line syntax
3268 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Sep 2012 12:43:17 +0200
3270 qemu-server (2.0-57) unstable; urgency=low
3272 * fix migrating VMs with snapshots
3274 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Sep 2012 08:12:37 +0200
3276 qemu-server (2.0-56) unstable; urgency=low
3278 * include shanpshot support
3280 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2012 15:59:40 +0200
3282 qemu-server (2.0-55) unstable; urgency=low
3284 * migrate: disable xbzrle (not stable)
3286 -- Proxmox Support Team <support@proxmox.com> Fri, 31 Aug 2012 11:04:35 +0200
3288 qemu-server (2.0-54) unstable; urgency=low
3290 * use mbps instead of bps
3292 * try to make migrate more stable
3294 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Aug 2012 12:16:39 +0200
3296 qemu-server (2.0-53) unstable; urgency=low
3298 * livemigrate : activate xbzrle cache
3300 * scsihw: add megasas controller
3302 * partly fix bug 247: retry qmp open
3304 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Aug 2012 13:45:18 +0200
3306 qemu-server (2.0-52) unstable; urgency=low
3308 * fix bug 217: stop VM after failed migrate
3310 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Aug 2012 10:33:57 +0200
3312 qemu-server (2.0-51) unstable; urgency=low
3314 * support up to 32 network devices
3316 * support up to 16 virtio devices
3318 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Aug 2012 10:06:39 +0200
3320 qemu-server (2.0-50) unstable; urgency=low
3322 * implement 'qm rescan' to update disk sizes and unused disk info
3324 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2012 09:22:29 +0200
3326 qemu-server (2.0-49) unstable; urgency=low
3328 * fix bug 242: re-add old monitor code
3330 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Aug 2012 10:33:37 +0200
3332 qemu-server (2.0-48) unstable; urgency=low
3334 * add size hint to drive options
3336 * new 'qm resize' command
3338 -- Proxmox Support Team <support@proxmox.com> Tue, 14 Aug 2012 06:55:39 +0200
3340 qemu-server (2.0-47) unstable; urgency=low
3342 * implement virtio-scsi-pci controller
3344 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Aug 2012 08:57:52 +0200
3346 qemu-server (2.0-46) unstable; urgency=low
3348 * bug fix: allow to set devices directly (-ide1 /dev/XYZ)
3350 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Jul 2012 11:59:14 +0200
3352 qemu-server (2.0-45) unstable; urgency=low
3354 * migrate: only scan available storages
3356 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 10:18:22 +0200
3358 qemu-server (2.0-44) unstable; urgency=low
3360 * migrate: only scan necessary storage for unused volumes
3362 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 06:59:23 +0200
3364 qemu-server (2.0-43) unstable; urgency=low
3366 * use new QMPClient code
3368 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Jul 2012 07:05:28 +0200
3370 qemu-server (2.0-42) unstable; urgency=low
3372 * fix pool permission checks on create
3374 -- Proxmox Support Team <support@proxmox.com> Wed, 30 May 2012 10:13:11 +0200
3376 qemu-server (2.0-41) unstable; urgency=low
3378 * more fixes for newer pve-storage versions
3380 -- Proxmox Support Team <support@proxmox.com> Thu, 24 May 2012 07:24:00 +0200
3382 qemu-server (2.0-40) unstable; urgency=low
3384 * minor fixes for newer pve-storage versions
3386 -- Proxmox Support Team <support@proxmox.com> Wed, 23 May 2012 07:23:31 +0200
3388 qemu-server (2.0-39) unstable; urgency=low
3390 * new startup option to define startup order.
3392 * do not start VMs with /etc/init.d/qemu-server. This is now
3393 done with /etc/init.d/pve-manager
3395 * qm: removed startall/stopall commands
3397 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Apr 2012 14:26:04 +0200
3399 qemu-server (2.0-38) unstable; urgency=low
3401 * add directsync cache mode
3403 * fix bug #147: allow to set migrate_downtime to 0
3405 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Apr 2012 08:51:56 +0200
3407 qemu-server (2.0-37) unstable; urgency=low
3409 * fix bug in storage availability check (migrate)
3411 -- Proxmox Support Team <support@proxmox.com> Sat, 07 Apr 2012 08:25:59 +0200
3413 qemu-server (2.0-36) unstable; urgency=low
3415 * use '-no-kvm-pit-reinjection -no-hpet' for win7 and w2k8 guests.
3417 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Apr 2012 12:34:00 +0200
3419 qemu-server (2.0-35) unstable; urgency=low
3421 * fix bug #134: allow to pass file names to qmrestore and 'qm set'
3423 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Apr 2012 10:51:41 +0200
3425 qemu-server (2.0-34) unstable; urgency=low
3427 * fix bug #12: check storage availability early (migrate)
3429 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Mar 2012 09:12:46 +0200
3431 qemu-server (2.0-33) unstable; urgency=low
3433 * fix bug #121: activate volumes correctly
3435 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 11:09:36 +0200
3437 qemu-server (2.0-32) unstable; urgency=low
3439 * fix usb host syntax (correctly pass hexadecimal numbers with prefix
3442 * document rerror/werror options
3444 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 07:11:51 +0200
3446 qemu-server (2.0-31) unstable; urgency=low
3448 * use new network setup code from PVE::Network (libpve-common-perl)
3450 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Mar 2012 10:39:12 +0200
3452 qemu-server (2.0-30) unstable; urgency=low
3456 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 12:20:33 +0200
3458 qemu-server (2.0-29) unstable; urgency=low
3460 * fix bug #97: execute 'clusvcadm' commands for HA managed VMs
3462 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 10:36:23 +0200
3464 qemu-server (2.0-28) unstable; urgency=low
3466 * use Digest::SHA instead of Digest::SHA1
3468 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 12:24:01 +0100
3470 qemu-server (2.0-27) unstable; urgency=low
3472 * make startall wait up to 10 seconds for quorum
3474 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 09:32:53 +0100
3476 qemu-server (2.0-26) unstable; urgency=low
3478 * fix bug 109: use scsi inquiry to test if we can use the scsi-block
3481 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Mar 2012 10:39:30 +0100
3483 qemu-server (2.0-25) unstable; urgency=low
3485 * fix bug 102: remove stale status file on stop
3487 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 12:53:32 +0100
3489 qemu-server (2.0-24) unstable; urgency=low
3491 * save description as comment.
3493 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 08:12:29 +0100
3495 qemu-server (2.0-23) unstable; urgency=low
3497 * fix lvremove call: avoid 'Not a CODE reference' warning
3499 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 06:36:33 +0100
3501 qemu-server (2.0-22) unstable; urgency=low
3503 * revert tablet mice fix - does not work reliable
3505 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 09:45:30 +0100
3507 qemu-server (2.0-21) unstable; urgency=low
3509 * fix tablet mice as default when live migrate
3511 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 06:51:09 +0100
3513 qemu-server (2.0-20) unstable; urgency=low
3515 * fix bug 96: fix vzdump on stopped vm
3517 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Feb 2012 07:38:45 +0100
3519 qemu-server (2.0-19) unstable; urgency=low
3521 * support more CPU models
3523 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Feb 2012 07:18:53 +0100
3525 qemu-server (2.0-18) unstable; urgency=low
3527 * fix cdrom (/dev/cdrom) permission check
3529 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Feb 2012 07:16:36 +0100
3531 qemu-server (2.0-17) unstable; urgency=low
3533 * fix cdrom removal bug
3535 -- Proxmox Support Team <support@proxmox.com> Wed, 15 Feb 2012 10:48:30 +0100
3537 qemu-server (2.0-16) unstable; urgency=low
3539 * ignore -tdf (avoid kvm warning) - this is no longer needed
3541 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Feb 2012 11:18:01 +0100
3543 qemu-server (2.0-15) unstable; urgency=low
3545 * online migration fix: close tunnel later, wait for connection close
3547 * fix bug #81: do no deactivate volumes in vzdump stop mode
3549 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jan 2012 11:24:56 +0100
3551 qemu-server (2.0-14) unstable; urgency=low
3553 * use 'da' instead of 'dk' for Danish keyboard (qemu use that name)
3555 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Jan 2012 11:24:40 +0100
3557 qemu-server (2.0-13) unstable; urgency=low
3559 * load vhost_net module
3561 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2011 12:25:22 +0100
3563 qemu-server (2.0-12) unstable; urgency=low
3565 * implement forceStop option for shutdown
3567 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2011 12:58:00 +0100
3569 qemu-server (2.0-11) unstable; urgency=low
3571 * do not use ehci by default
3573 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Dec 2011 10:26:36 +0100
3575 qemu-server (2.0-10) unstable; urgency=low
3577 * set qm exit codes currectly
3579 * fix 'qm shutdown <vmid>'
3581 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2011 09:35:43 +0100
3583 qemu-server (2.0-9) unstable; urgency=low
3587 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 11:14:01 +0100
3589 qemu-server (2.0-8) unstable; urgency=low
3591 * be more careful when removing snapshots
3593 * do not call check_lock() for sendkey
3595 * try to detect errors before starting the background task
3597 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 08:08:44 +0100
3599 qemu-server (2.0-7) unstable; urgency=low
3601 * activate/deactivate LVs more carefully
3603 * avoid syslog whenever possible
3607 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Nov 2011 08:08:04 +0100
3609 qemu-server (2.0-6) unstable; urgency=low
3611 * set correct migrate speed
3613 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2011 09:12:12 +0100
3615 qemu-server (2.0-5) unstable; urgency=low
3617 * fix vzdump stop mode
3619 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Nov 2011 06:38:03 +0100
3621 qemu-server (2.0-4) unstable; urgency=low
3625 -- Proxmox Support Team <support@proxmox.com> Sat, 19 Nov 2011 09:54:19 +0100
3627 qemu-server (2.0-3) unstable; urgency=low
3629 * implement monitor API
3631 * implement qmrestore
3633 * fix vzdump plugin for 2.0
3635 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Nov 2011 11:35:58 +0100
3637 qemu-server (2.0-2) unstable; urgency=low
3641 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2011 10:15:37 +0200
3643 qemu-server (2.0-1) unstable; urgency=low
3645 * see Changelog for details
3647 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Aug 2010 13:48:12 +0200
3649 qemu-server (1.1-18) unstable; urgency=low
3651 * small bug fix im qmigrate
3653 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Aug 2010 08:05:21 +0200
3655 qemu-server (1.1-17) unstable; urgency=low
3657 * carefully catch write errors
3659 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Jul 2010 09:00:48 +0200
3661 qemu-server (1.1-16) unstable; urgency=low
3663 * add rerror/werror options (patch from l.mierzwa)
3665 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jun 2010 08:49:00 +0200
3667 qemu-server (1.1-15) unstable; urgency=low
3669 * fix vmtar bug (endless growing archive)
3671 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Jun 2010 12:22:17 +0200
3673 qemu-server (1.1-14) unstable; urgency=low
3675 * correct order of config option (prevent virtio reordering)
3677 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Apr 2010 09:05:15 +0200
3679 qemu-server (1.1-13) unstable; urgency=low
3681 * allow vlan1-to vlan4094 (Since 802.1q allows VLAN identifiers up to 4094).
3683 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Apr 2010 10:19:37 +0200
3685 qemu-server (1.1-12) unstable; urgency=low
3687 * minor fixes for new qemu-kvm 0.12.3
3689 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Apr 2010 12:01:17 +0200
3691 qemu-server (1.1-11) unstable; urgency=low
3693 * experimental support for pci pass-through (option 'hostpci')
3695 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Jan 2010 13:03:44 +0100
3697 qemu-server (1.1-10) unstable; urgency=low
3699 * add compatibility code for older kvm versions (0.9)
3701 * only use fairsched when the kernel has openvz support
3703 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 15:17:18 +0100
3705 qemu-server (1.1-9) unstable; urgency=low
3707 * always display boot menu (Press F12...)
3709 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2009 10:28:23 +0100
3711 qemu-server (1.1-8) unstable; urgency=low
3713 * fix 'stopall' timeout
3715 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Oct 2009 12:55:23 +0200
3717 qemu-server (1.1-7) unstable; urgency=low
3719 * do not set fairsched --id when using virtio
3721 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2009 11:57:57 +0200
3723 qemu-server (1.1-6) unstable; urgency=low
3725 * disable fairsched when option 'cpuunits' is set to 0 (zero)
3727 * disable fairsched when the VM uses virtio devices.
3729 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2009 15:06:48 +0200
3731 qemu-server (1.1-5) unstable; urgency=low
3733 * suppress syslog when setting migrate downtime/speed
3735 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2009 10:10:55 +0200
3737 qemu-server (1.1-4) unstable; urgency=low
3739 * depend on stable pve-qemu-kvm
3741 * new migrate_speed and migrate_downtime settings
3743 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Sep 2009 11:18:08 +0200
3745 qemu-server (1.1-3) unstable; urgency=low
3747 * support up to 1000 vlans
3749 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:35 +0200
3751 qemu-server (1.1-2) unstable; urgency=low
3753 * introduce new 'sockets' and 'cores' settings
3755 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:18 +0200
3757 qemu-server (1.1-1) unstable; urgency=low
3759 * use new pve-storage framework
3761 * delete unused disk on destroy
3763 * fix cache= option (none|writethrough|writeback)
3765 * use rtc-td-hack for windows when acpi is enabled
3767 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jun 2009 08:49:53 +0200
3769 qemu-server (1.0-14) unstable; urgency=low
3771 * add new tablet option (to disable --usbdevice tablet, which generate
3772 many interrupts, which is bad when you run many VMs) (Patch was
3773 provided by Tomasz Chmielewski)
3775 -- Proxmox Support Team <support@proxmox.com> Wed, 27 May 2009 12:50:45 +0200
3777 qemu-server (1.0-13) unstable; urgency=low
3779 * Conflict with netcat-openbsd
3781 -- Proxmox Support Team <support@proxmox.com> Wed, 13 May 2009 10:20:54 +0200
3783 qemu-server (1.0-12) unstable; urgency=low
3785 * fixes for debian lenny
3787 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Apr 2009 14:28:42 +0200
3789 qemu-server (1.0-11) unstable; urgency=low
3791 * allow white spaces inside args - use normal shell quoting
3793 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Feb 2009 11:31:36 +0100
3795 qemu-server (1.0-10) unstable; urgency=low
3799 * bug fix for 'lost description'
3801 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2009 08:18:29 +0100
3803 qemu-server (1.0-9) unstable; urgency=low
3805 * add 'parallel' option
3807 * add 'startdate' option
3811 -- Proxmox Support Team <support@proxmox.com> Mon, 2 Feb 2009 08:53:26 +0100
3813 qemu-server (1.0-8) unstable; urgency=low
3815 * add 'serial' option
3817 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jan 2009 08:52:24 +0100
3819 qemu-server (1.0-7) unstable; urgency=low
3821 * use new systax for kvm vga option (needed for kvm newer than kvm77)
3823 -- Proxmox Support Team <support@proxmox.com> Wed, 7 Jan 2009 14:46:09 +0100
3825 qemu-server (1.0-6) unstable; urgency=low
3827 * use predefined names for tap devices
3829 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Dec 2008 13:00:44 +0100
3831 qemu-server (1.0-5) unstable; urgency=low
3833 * added host usb device support
3835 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Nov 2008 11:26:04 +0100
3837 qemu-server (1.0-4) unstable; urgency=low
3839 * fix status problem
3841 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Nov 2008 13:13:43 +0100
3843 qemu-server (1.0-3) unstable; urgency=low
3847 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Nov 2008 08:29:23 +0100
3849 qemu-server (1.0-1) unstable; urgency=low
3851 * update for kvm-75, support vm migration
3853 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Oct 2008 11:04:03 +0200
3855 qemu-server (0.9) unstable; urgency=low
3859 -- Proxmox Support Team <support@proxmox.com> Mon, 4 Feb 2008 09:10:13 +0100