1 qemu-server (7.0-12) bullseye; urgency=medium
3 * fix #3371: import ovf: allow the use of dots in the VM name
5 * bootorder: fix double entry on cdrom edit
7 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Jul 2021 16:53:44 +0200
9 qemu-server (7.0-11) bullseye; urgency=medium
11 * nic: support the intel e1000e model
13 * lvm: avoid the use of io_uring for now
15 * live-restore: fail early if target storage doesn't exist
17 * api: always add new CD drives to bootorder
19 * fix #2563: allow live migration with local cloud-init disk
21 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jul 2021 11:08:48 +0200
23 qemu-server (7.0-10) bullseye; urgency=medium
25 * avoid using io_uring for drives backed by LVM and configured for write-back
26 or write-through cache
28 -- Proxmox Support Team <support@proxmox.com> Wed, 07 Jul 2021 14:56:34 +0200
30 qemu-server (7.0-9) bullseye; urgency=medium
32 * cpu weight: always clamp value to lower maximum for cgroup v2 and fix
33 defaults (v1 -> 1024, v2 -> 100)
35 * api: improve error handling when applying pending config changes
37 -- Proxmox Support Team <support@proxmox.com> Wed, 07 Jul 2021 12:02:13 +0200
39 qemu-server (7.0-7) bullseye; urgency=medium
41 * improve #3329: ensure write-back is used over write-around for EFI disk,
42 as OVMF profits a lot from cached writes due to its frequent
43 read-modify-write operations
45 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Jul 2021 20:49:50 +0200
47 qemu-server (7.0-6) bullseye; urgency=medium
49 * live-restore: preload efidisk before starting VM
51 * For now do not use io_uring for drives backed by Ceph RBD, with KRBD and
52 write-back or write-through cache enabled, as in that case some polling/IO
55 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Jul 2021 09:45:06 +0200
57 qemu-server (7.0-5) bullseye; urgency=medium
59 * don't default to O_DIRECT (cache=none) on btrfs without nocow
61 * fix #2175: api: update VM: check old drive-config for permissions too to
62 ensure a valid transition when limited to CDROM changes.
64 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 18:58:19 +0200
66 qemu-server (7.0-4) bullseye; urgency=medium
68 * enable io-uring support by default when running QEMU 6.0 or newer
70 * VM start: always check if storages of volumes support correct content-type
72 * use KillMode 'process' for systemd scope to cope with depreacation of
75 * cli, api: handle new warnings task status
77 * improve backup of templates with EFI disks and with SATA and IDE
78 disk controllers in use
80 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 12:57:27 +0200
82 qemu-server (7.0-3) bullseye; urgency=medium
84 * vzdump: add master key support
86 * vzdump: drop legacy fallback logging for dirty-bitmap
88 * vm destroy: do not remove unreferenced disks by default
90 * fix #3329: turn on cache=writeback for efidisks on rbd
92 * avoid setting LUN number for drives when the `pvscsi` controller is used,
93 as that cannot handle multiple LUNs, increase the `scsi-id` instead
95 * config: limit description/comment length to 8 KiB
97 * migrate: enforce that image content type is available and configured on
100 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jun 2021 11:17:52 +0200
102 qemu-server (7.0-2) bullseye; urgency=medium
104 * api: clone: sort vm disks to keep numbers consistent
106 * api: VM status: make template property optional in return object
108 * add compatibility for QEMU 6.0
110 * destroy VM: always remove (referenced) VM state volumes
112 * destroy VM: also check if unused volumes are base images
114 * live-restore: log more similar to regular restore, outputting the user the
115 PBS repo/snapshot and target for each drive.
117 -- Proxmox Support Team <support@proxmox.com> Fri, 28 May 2021 12:46:36 +0200
119 qemu-server (7.0-1) pve; urgency=medium
121 * re-build for Proxmox VE 7 / Debian Bullseye
123 -- Proxmox Support Team <support@proxmox.com> Thu, 13 May 2021 19:11:18 +0200
125 qemu-server (6.4-2) pve; urgency=medium
127 * fix #2862: allow sata/ide template backups
129 * migration: improve speed-limits for >1G connections again
131 * fix getting bootdisk size for new bootorder config scheme
133 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Apr 2021 16:16:04 +0200
135 qemu-server (6.4-1) pve; urgency=medium
137 * fix the +pveN versioned machine types when PXE is used
139 * migration: avoid re-scanning all volumes
141 * migration: do not always set default speed limit if none is configured
143 * migration: rework logging to more humand friendly format, avoiding to much
146 * qmrestore: add live-restore option for CLI tool
148 * live-restore: hold 'create' lock during operation
150 * live-restore: don't remove VM on error, to allow an VM user to save any new
151 data before retrying the operation.
153 * fix #3369: auto-start vm after failed stopmode backup
155 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Apr 2021 16:26:54 +0200
157 qemu-server (6.3-11) pve; urgency=medium
159 * enable live-restore tech preview for Proxmox Backup Server hosted backup
162 * drive mirror: rework periodic status reporting to be human friendlier
164 * drive mirror: stop logging progress for a disk once it got ready
166 * image convert: use human-readable units in progress report
168 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Apr 2021 18:32:06 +0200
170 qemu-server (6.3-10) pve; urgency=medium
172 * increase timeout for block (disk) resize QMP command
174 * fix #3314: cloudinit: IPv6 requires type 'static6'
176 * fix #2670: cloudinit: enable SLAAC again now that client support is there
178 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Mar 2021 18:40:58 +0200
180 qemu-server (6.3-9) pve; urgency=medium
182 * restore vma: fix applying storage-specific bandwidth limit
184 * snapshot: set migration caps before savevm-start
186 * vzdump: improve error logging for query-proxmox-support to avoid
189 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 09:47:27 +0100
191 qemu-server (6.3-8) pve; urgency=medium
193 * qm status: sort hash keys on verbose output
195 * improve windows VM version pinning on VM creation
197 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Mar 2021 10:01:09 +0100
199 qemu-server (6.3-7) pve; urgency=medium
201 * vzdump: increase Proxmox Backup Server backup QMP command timeout
203 -- Proxmox Support Team <support@proxmox.com> Tue, 09 Mar 2021 08:21:43 +0100
205 qemu-server (6.3-6) pve; urgency=medium
207 * fix #3324: clone disk: use larger blocksize for EFI disk
209 * fix #3301: status: add currently running machine and QEMU version to full
212 * api: add endpoint to list all available QEMU machine type and version
215 * always pin virtual machines with Windows as ostype to a fixed QEMU machine
216 version by default. For existing VMs with Windows based OS-type use the 5.1
217 machine version (or the next available one, for older QEMU versions) to
218 improve stabillity of the hardware layout from Windows point of view. Linux
219 and other OS types are not as sensitive to those changes, so keep the
220 default to the currently latest available machine versions for non-Windows
223 * update VM: check for CDROM not just drive permissions when removing a
226 -- Proxmox Support Team <support@proxmox.com> Fri, 05 Mar 2021 21:42:59 +0100
228 qemu-server (6.3-5) pve; urgency=medium
230 * cloudinit: add opennebula config format
232 * cloudinit: remove pending delete on online regenerate image
234 * snapshot/save-vm: periodically print progress and show information about
235 drives during snapshot
237 * qmeventd: explicitly close() pidfds
239 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Feb 2021 18:05:18 +0100
241 qemu-server (6.3-4) pve; urgency=medium
243 * audio: add the "none" dummy audio backend
245 * fix drive-mirror completion with cloudinit
247 * vm destroy: allow opt-out of purging unreferenced disks
249 * fix #2788: do not resume vms after backup if they were paused before
251 * anchor CPU flag regex to avoid arbitrary flag suffixes
253 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Jan 2021 17:21:07 +0100
255 qemu-server (6.3-3) pve; urgency=medium
257 * api: adapt VM destroy and purge description
259 * clone disk: fix regression in offline clone of efidisk
261 * cloudinit: fix cloning/restoring of cloudinit disks in raw format
263 -- Proxmox Support Team <support@proxmox.com> Tue, 15 Dec 2020 16:33:01 +0100
265 qemu-server (6.3-2) pve; urgency=medium
267 * PBS: use improved method to assemble repository url, fixing issues when
268 using IPv6 or non-default ports
270 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Dec 2020 18:06:25 +0100
272 qemu-server (6.3-1) pve; urgency=medium
274 * deactivate volumes after storage migrate
276 * print query-proxmox-support result in 'full' status
278 * clone disk: avoid errors after disk was moved by QEMU
280 * replace cgroups_write by cgroup change_cpu_shares && change_cpu_quota
282 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Nov 2020 14:30:50 +0100
284 qemu-server (6.2-20) pve; urgency=medium
286 * don't migrate replicated VM whose replication job is marked for
289 * ensure qmeventd service is stopped after pve-guests and pve-ha-lrm service
292 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Nov 2020 17:08:45 +0100
294 qemu-server (6.2-19) pve; urgency=medium
296 * fix #3113: unbreak drive hotplug
298 * qmeventd: add handling for -no-shutdown QEMU instances, to avoid errors if
299 the guest OS shuts down the VM during a backup job.
301 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Nov 2020 13:37:00 +0100
303 qemu-server (6.2-18) pve; urgency=medium
305 * migrate: tell QEMU to enable dirty-bitmap migration, if supported
307 * partially fix #3056: always try to cancel backups when failed to start job
309 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Oct 2020 18:23:13 +0100
311 qemu-server (6.2-17) pve; urgency=medium
313 * bootorder: don't print empty 'order=' property
315 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2020 16:08:57 +0200
317 qemu-server (6.2-16) pve; urgency=medium
319 * fix #3010: add 'bootorder' parameter for better control of boot devices
321 * fix VM clone from snapshot with cloudinit disk
323 * fix various possible issues by avoiding conditionally declared variables
326 * PCI passthrough: fix setting VGA to 'none' when marking passed-through
327 device as 'Primary GPU'
329 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Oct 2020 15:51:48 +0200
331 qemu-server (6.2-15) pve; urgency=medium
333 * fix #2570: add 'keephugepages' config property
335 * vzdump: log 'finishing' state for Proxmox Backup Server jobs, to avoid
336 suggesting that the backup is stuck at 100%. This can happen when the
337 validation and mark of pre-existing chunks needs a bit longer.
339 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2020 17:44:28 +0200
341 qemu-server (6.2-14) pve; urgency=medium
343 * vzdump: allow bandwidth limit also PBS backup
345 * avoid a warning when checking the VMs bios
347 * fix #2862: properly backup (all) VM templates
349 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Aug 2020 19:33:54 +0200
351 qemu-server (6.2-13) pve; urgency=medium
353 * fix use of bandwidth limits with offline storage migrate
355 * allow one to add CPU features with a dot, like "+sse4.2", correctly
357 * vzdump: improve logging output and report dirty bitmap state for each disk
359 * vzdump: display actually uploaded chunks as 'write' speed to conform more
360 closely with the actual network transmission line-speed.
362 * fix #2749: vga: disable the display EDID information for the combination of
363 Windows SeaBIOS and VGA guests to avoid a reduced list of possible screen
364 resolutions. (Windows may cache the list of possible resolutions,
365 uninstalling 'Microsoft Basic Display Adapter' and rebooting may then help)
367 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2020 11:42:47 +0200
369 qemu-server (6.2-11) pve; urgency=medium
371 * fix #2857: restore: pass keyfile to pbs-restore
373 * fix #2728: die/warn if target is not a replication target when
376 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Jul 2020 08:13:29 +0200
378 qemu-server (6.2-10) pve; urgency=medium
380 * pass-through: fix mdev cmdline generation
382 * docs: add man page cpu-models.conf(5)
384 * start: set resume parameter for VM start anytime there is a 'vmstate' in
385 the config, not just when it has the 'suspend' lock
387 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Jul 2020 13:37:37 +0200
389 qemu-server (6.2-9) pve; urgency=medium
391 * support encrypted pbs backups
393 -- Proxmox Support Team <support@proxmox.com> Fri, 10 Jul 2020 14:23:46 +0200
395 qemu-server (6.2-8) pve; urgency=medium
397 * backup: detect PBS features and use only supported
399 * fix #2671: include CPU format in man page again
401 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jul 2020 15:14:36 +0200
403 qemu-server (6.2-6) pve; urgency=medium
405 * vzdump: fix variable redeclaration warning
407 * make backup log more friendlier to read for humans
409 -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 19:00:09 +0200
411 qemu-server (6.2-4) pve; urgency=medium
413 * fix #2787: properly parse vga for vncproxy
415 * vncproxy: allow to request a generated VNC password
417 * fix #2794: allow legacy IGD passthrough
419 * avoid backup command timeout with PBS
421 * fix #2741: add VM.Config.Cloudinit permission
423 * enable dirty-bitmap incremental backups for PBS
425 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Jun 2020 11:33:35 +0200
427 qemu-server (6.2-3) pve; urgency=medium
429 * fix #2748: make order of cloudinit interfaces consistent
431 * fix #2774: add early check for non-managed volumes
433 * allow to force MTU for a VM net-device
435 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jun 2020 11:17:09 +0200
437 qemu-server (6.2-2) pve; urgency=medium
439 * adapt net-device hotplug to more strict QMP schema of QEMU 5.0
441 -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2020 13:00:18 +0200
443 qemu-server (6.2-1) pve; urgency=medium
445 * qmrestore: fix VMA restore from STDIN
447 -- Proxmox Support Team <support@proxmox.com> Thu, 07 May 2020 21:51:01 +0200
449 qemu-server (6.1-20) pve; urgency=medium
451 * cfg2cmd: fix uninitialized value warning on OVMF w/o efidisk
453 * vzdump: fix backup of templates with stdout as output
455 * cfg2cmd: set audiodev parameter only on qemu >= 4.2
457 * api: allow listing custom and default CPU models
459 -- Proxmox Support Team <support@proxmox.com> Wed, 06 May 2020 17:16:56 +0200
461 qemu-server (6.1-19) pve; urgency=medium
463 * clone: use new config_lock_shared
465 -- Proxmox Support Team <support@proxmox.com> Tue, 5 May 2020 11:22:04 +0200
467 qemu-server (6.1-18) pve; urgency=medium
469 * vzdump: assemble: fix skipping all pending and snapshot config entries
471 * api/destroy: repeat early checks after locking
473 * migrate: skip rescan for efidisk and shared volumes
475 -- Proxmox Support Team <support@proxmox.com> Mon, 04 May 2020 17:36:40 +0200
477 qemu-server (6.1-17) pve; urgency=medium
479 * backup: never try to freeze in stop mode backup
481 * Fix #2124: Add support for zstd
483 -- Proxmox Support Team <support@proxmox.com> Mon, 4 May 2020 14:11:50 +0200
485 qemu-server (6.1-16) pve; urgency=medium
487 * spice audio: improve compatibility with QEMU versions newer than 4.2
489 * migrate: workaround issues with format switch on storage live migration
491 * fix live migration with replicated unused volumes
493 * importovf: improve compatibility with OVF files without default namespaces
495 * backup restore: use correct storage for format check for cloudinit drives
497 * handle stopping the storage migration NBD server better
499 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Apr 2020 16:23:24 +0200
501 qemu-server (6.1-14) pve; urgency=medium
503 * Use foreach_volume instead of foreach_drive
505 * Use new storage_migrate interface
507 * migrate: update config with changed volume IDs
509 * migrate: allow specifying targetstorage for offline migration
511 * migrate: sync_disks: use allow_rename to avoid collisions on the target
514 * migrate: sync_disks: log output of storage_migrate
516 * migrate: also cleanup disks migrated by storage_migrate in case of failure
518 -- Proxmox Support Team <support@proxmox.com> Thu, 9 Apr 2020 08:56:44 +0200
520 qemu-server (6.1-13) pve; urgency=medium
522 * rescan: fix call to foreach_volume
524 * migration: fix downtime limit auto-increase
526 * migrate: allow arbitrary source->target storage maps
528 * migrate: always check storage permissions and content type
530 * Include full KVM/QEMU "-cpu" parameter with live-migration and
531 snapshots/suspend to allow supporting custom CPU models
533 * fix #2318: allow phys-bits CPU setting
535 * allow custom CPU models
537 * config: harmonize bridge pattern to match the same limits of containers
539 * cpu config: add upcoming EPYC-Rome CPU type
541 -- Proxmox Support Team <support@proxmox.com> Wed, 08 Apr 2020 17:08:13 +0200
543 qemu-server (6.1-12) pve; urgency=medium
545 * CPUConfig: fix module load when pmxcfs is unavailable
547 * migrate: fix replication false-positives
549 * migrate: cleanup disk/bitmaps if 'qm start' failed
551 * migration with targetstorage: check if target storage supports images
553 * fix efidisks on storages with minimum sizes bigger than OVMF_VARS.fd
555 * Implement volume-related helpers and use new foreach_volume
557 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Mar 2020 10:00:13 +0200
559 qemu-server (6.1-11) pve; urgency=medium
561 * vzdump: fix regression in backups for specific storage
563 * custom CPU models: add initial parser and verifier
565 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Mar 2020 09:00:24 +0100
567 qemu-server (6.1-10) pve; urgency=medium
569 * version_guard: early out when major/minor version is high enough
571 * drive-mirror: add support for incremental sync
573 * migrate: add replication info to disk overview
575 * migrate: add live-migration of replicated disks
577 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Mar 2020 15:16:21 +0100
579 qemu-server (6.1-8) pve; urgency=medium
581 * cloudinit: make genisoimage quieter, only output errors
583 * Append newline to all QGA commands for compatibility with non standard
584 conforming Apple based guest agent implementation
586 * add experimental support for proxmox backup server
588 * fix #2580: api/delete: drop VM from HA resources if purge is set
590 * improve drive mirror completion over NBD during migration
592 * add secured unix socket support for NBD storage migration
594 * Disable memory hotplug for custom NUMA topologies and die on misaligned
597 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Mar 2020 11:11:31 +0100
599 qemu-server (6.1-7) pve; urgency=medium
601 * vzdump: always exclude efidisks from backups of machines currently not set
604 * Simplify QEMU version check and require at least 3.0+
606 * Align size to 1 KiB bytes before doing 'qmp block_resize'
608 * fix #2611: use correct operation when calculating the migration bandwidth
611 * fix #2612: allow input-data in guest exec and make command optional
613 * cpu models: add icelake-server and icelake-client
615 * already add models from future QEMU 4.2 release
617 * fix #2264: allow one to add a virtio-rng device for improved entropy
620 * update_disksize: also update disk size if there was no old size at all
622 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2020 19:12:16 +0100
624 qemu-server (6.1-6) pve; urgency=medium
626 * allow reading snapshot config for users with VM.Audit on a guest
628 * fix #2566: increase scsi limit to 31
630 * fix #2578: check if $target is provided in clone
632 * update QMP commands to reflect (future) depreacations and changes in QEMU
634 * resize volume: always request new size from storage after resizing
636 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2020 06:40:43 +0100
638 qemu-server (6.1-5) pve; urgency=medium
640 * Add QEMU CPU flag querying helpers
642 * hotplug_pending: remove redundant write/load config calls
644 * api: vm clone: unlink zombie target VM and firewall config at end of error
647 * add timeout parameter to vm start API/CLI endpoint
649 * fix #2070: vm_start: for a migrating VM, use current format of disk if
652 * hotplug_pending: make 'ssd' option non-hotpluggable, it cannot be changed
653 live on a plugged disk.
655 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jan 2020 10:27:33 +0100
657 qemu-server (6.1-4) pve; urgency=medium
659 * check if QEMU version is recent enough for requested machine type
661 * suspend to disk: check and enforce more strict permissions
663 * update disk size before local disk migration
665 * hide very long commandline on vm_start/migrate failure
667 * fix #2493: show QEMU errors in migration log
669 * api/restore: do not trigger autostart-after-restored task from locked
672 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Dec 2019 16:03:25 +0100
674 qemu-server (6.1-3) pve; urgency=medium
676 * create efidisk: poll the real size after volume creation, as some storages
677 need to create bigger volumes as requested, to cope with their internal
678 alignment requirements.
680 * fix #2469: fix qemu-img convert src_format detection, wrongly reverted.
682 * fix #2510: hostpci: always check if specified device exists
684 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Dec 2019 11:44:14 +0100
686 qemu-server (6.1-2) pve; urgency=medium
688 * api: allow one to remove (hibernation) vmstate
690 * vzdump: log QGA FS freeze/thaw tries in task log
692 * skip efidisk0 in hotplug
694 -- Proxmox Support Team <support@proxmox.com> Sat, 30 Nov 2019 18:38:36 +0100
696 qemu-server (6.1-1) pve; urgency=medium
698 * fix #2367: do not allow snapshot with name PENDING
700 * fix #2469: fix qemu-img convert src_format detection
702 * implement PVE Version addition for QEMU machine allowing to introduce new
703 features while keeping migration compatibility more easily
705 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 13:06:21 +0100
707 qemu-server (6.0-17) pve; urgency=medium
709 * PCI(e) pass-through: ensure we fallback to the previous default "0000"
712 -- Proxmox Support Team <support@proxmox.com> Sat, 23 Nov 2019 09:52:09 +0100
714 qemu-server (6.0-16) pve; urgency=medium
716 * fix #2473: use of unitialized value
718 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Nov 2019 14:18:58 +0100
720 qemu-server (6.0-15) pve; urgency=medium
722 * api/migration: fix autocomplete for targetstorage
724 * add 'type' to guest agent format, allowing one to choose between VirtIO
727 * clone: pre-allocate cloud-init disk for destination
729 * SPICE/QXL: tell Linux VMs that they can add up to 4 display when running
730 with qemu 4.1 or newer
732 * add support to tell showcmd helper to assume a specific forced machine
733 version when assembling a command
735 * refactor QemuServer to avoid cyclic module dependencies
737 * fix #2436: pci: do not hardcode pci domain to 0000
739 * add 'tags' config option for adding meta information to a VM
741 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 19:41:01 +0100
743 qemu-server (6.0-14) pve; urgency=medium
745 * use PVE::DataCenterConfig, use PVE::SSHInfo, use PVE::RRD for RRD data
747 * refactor migration IP retrieval
749 * add missing packages to (build-)dependencies
751 * fix #2457: ga: set-user-password: increase maxLength of password
753 * fix restoring old VM backups made with Promxox VE earlier than 2.3
755 * improve test mocking
757 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Nov 2019 12:12:03 +0100
759 qemu-server (6.0-13) pve; urgency=medium
761 * fix #2434: extend machine regex to support stable release machine updates
763 * prepare to fix #2408, #2355, #2380: use scsi-hd backend for iSCSI as well
765 * fix deleting pending changes for not yet existing options
767 * improve hugepage memory size detection
769 * avoid a race for VMID reservation when importing an OVF manifest to a new
772 * cleanup importidsk CLI command, and say to which exact disk we imported
774 * add simple runtime heuristic for IOThread backup support, to ensure the VM
775 to backup was started with a recent QEMU version.
777 * QMPClient: ensure QMP connection is also closed in certain edge cases
779 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Oct 2019 17:43:41 +0100
781 qemu-server (6.0-12) pve; urgency=medium
783 * fix regression from 6.0-10 with vmstate restore on RBD
785 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 16:31:46 +0200
787 qemu-server (6.0-11) pve; urgency=medium
789 * fix #1071: VMs with IOThread enabled disks can now be backed up
791 * fix regression from 6.0-10 with snapshot restore and statefile
793 * fix regression with from 6.0-10 where forced was always assumed to be true
794 for applying pending changes
796 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 12:50:18 +0200
798 qemu-server (6.0-10) pve; urgency=medium
800 * fix #2344: ignore cloudinit in replication check
802 * fix #1291: add option purge for vm_destroy api call
804 * increase code re-use with pve-container for pending changes in
807 * fix #2412: only do the final configuration destroy after all the VMs
808 resources, and references in other configurations like Firewall or resource
809 pools was successfully cleaned up
811 * fix #2171: ensure that non filesystem based statefiles get activated on VM
814 * fix #2395: improve QEMU image converter to cope better with pure file based
815 sources and iSCSI source and destinations
817 * fix #2402: allow 1GB hugepages if 2MB is unavailable
819 * qemu 4.0 : add Cascadelake-Server and KnightsMill Intel CPU models
821 * fix #2217: don't copy cloudinit disk on clone
823 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Oct 2019 22:04:50 +0200
825 qemu-server (6.0-9) pve; urgency=medium
827 * fix issue where a SPICE remote viewer was disconnected during live migration
829 * Add VM reboot API/CLI integration, allowing to reboot a VM and applying any
830 pending changes in-between
832 * CPU flags: allow one to add aes flag
834 * fix #2263: die on live migration with local cloudinit disk
836 * fix #2041, #2272: Add Spice enhancements
838 * Add support for more (up to 16) PCI(e) devices
840 * usb: Allow one to make SPICE USB ports USB3 capabile
842 * allow one to use USB3 for SPICE USB ports with VMs started already with
843 QEMU version 4.0.0, as live-migrations were not possible with this previous
844 unsupported setup anyway. Live-snapshots from VMs with a SPICE USB device
845 which was manually set (wasn't possible over Webinterface) to USB3 with a
846 machine version of 4.0.0, need to remove the "usb3" flag again from the
847 snapshot config when restoring it.
849 * rework kvm_user_version cache mechanism
851 * api: deletion: check also pending values for serial/usb
853 * migration api: explicitly clear "online" flag if VM is stopped to avoid
854 issues with storage migrations which are handled different for stopped VMs
856 * abort resize disk if current size could not be determined
858 * fix #2382: delete cloudinit disk before restoring
860 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Sep 2019 12:01:58 +0200
862 qemu-server (6.0-7) pve; urgency=medium
864 * ensure new SPICE audio device works also with 'q35' based VMs
866 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Jul 2019 15:13:35 +0200
868 qemu-server (6.0-6) pve; urgency=medium
870 * Add SPICE audio device support
872 * fix #2275: die on invalid sendkey
874 * Make sometimes problematic 'hv-tlbflush' and 'hv-evmcs' CPU flags optional
876 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2019 18:20:10 +0200
878 qemu-server (6.0-5) pve; urgency=medium
880 * do not pass Proxmox VE internal startdate 'now' to QEMU, it does not
883 * use new pcie port hardware for 4.0 and newer q35 machine types
885 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:44:28 +0200
887 qemu-server (6.0-4) pve; urgency=medium
889 * fix guest shutdown if agent is configured but no timeout was passed
891 * cloudinit: set iso-level in genisoimage call
893 * migrate pre-condition check: add size to volume attributes and handle
894 storage not selected manually in storage config
896 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 20:35:09 +0200
898 qemu-server (6.0-3) pve; urgency=medium
900 * do not add evmcs HyperV enlightment at all for now due to incompatibillity
903 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 14:33:01 +0200
905 qemu-server (6.0-2) pve; urgency=medium
907 * add migration precondition api endpoint
909 * wait for possible left over VM scopes to be gone through dbus based helper
912 * fix #2244: Allow timeout for guest-agent shutdown
914 * fix #2083: Add hv_tlbflush, hv_ipi, hv_evmcs enlightenments
916 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Jun 2019 17:46:51 +0200
918 qemu-server (6.0-1) pve; urgency=medium
920 * SMBIOS: followup: allow now 512 characters for full format string
922 * fix #2190: Base64 encode SMBIOS value strings in order to allow more
925 * allow one to add md-clear cpu flag
927 * add qm command for cloudinit config dump
929 * drop vnc x509 param, deprecated in 2.5 removed in 4.0
931 * Fix #1999: cli: listsnapshot: handle multiple roots and mark orphaned as
934 * drop references to un-maintained sheepdog plugin
936 * vm_resume: correctly honor $nocheck
938 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Jun 2019 20:59:07 +0200
940 qemu-server (6.0-0+1) pve; urgency=medium
942 * rebuild for Debian Buster / PVE 6.0
944 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 19:12:34 +0200
946 qemu-server (5.0-51) unstable; urgency=medium
948 * fix #1811: allow non root user to edit serialX: socket entries
950 * allow non root users to add spice usb port
952 * fix #1829: do not ignore format parameter when creating cloudinit
955 * fix: #1075: Restore VM template to VM and try to convert to template
957 * fix #2173: use qemu-img to check cloudinit disk existence
959 * cloudinit: use detected format in volume name parsing
961 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Apr 2019 14:07:59 +0000
963 qemu-server (5.0-50) unstable; urgency=medium
965 * fix #2100: ignore cloudinit drive on offline migration
967 * honor bandwidth limits (bwlimit) for migrate, drive-mirror, clone
970 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Apr 2019 16:22:10 +0200
972 qemu-server (5.0-49) unstable; urgency=medium
974 * return config lock in vm status
976 * move 'pve-snapshot-name' to common
978 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Mar 2019 12:55:03 +0100
980 qemu-server (5.0-48) unstable; urgency=medium
982 * cloud-init: allow custom network/user data files via snippets
984 * fix #2120: use hosts initiator name with qemu-img
986 * fix #2131: get correct device when deleting iothreads
988 * config: NIC macaddr: enforce unicast MAC addresses
990 * implement suspend to disk for running VMs over API and CLI
992 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Mar 2019 13:25:38 +0100
994 qemu-server (5.0-47) unstable; urgency=medium
996 * fix #2043: always stop existing systemd scopes on VM start
998 * use nr_hugepages from /proc/cmdline
1000 * fix #2101: cloudinit: IPv6 ending in : not parsed as a string
1002 * fix #1891: Add zsh command completion for qm and qmrestore
1004 * fix #2097: allow one to set and pass the WWN parameter for IDE, SATA and
1007 * allow one to add IVSHMEM device to a VM configuration
1009 * fix #2114: always set correct link status on VM network adapter hotplug
1011 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Mar 2019 10:11:00 +0100
1013 qemu-server (5.0-46) unstable; urgency=medium
1015 * allow explicit hv-vendor-id
1017 * allow explicit set vga with gpu passthrough
1019 * fix #1924: add snapshot parameter
1021 * allow to add pre- start/stop hook scripts
1023 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Feb 2019 13:04:19 +0100
1025 qemu-server (5.0-45) unstable; urgency=medium
1027 * fix #2003: give qm terminal a terminal over ssh
1029 * migrate: fix local disk migration with online VMs
1031 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jan 2019 10:42:03 +0100
1033 qemu-server (5.0-44) unstable; urgency=medium
1035 * fix #1013 : migrate : sync_disk : --targetstorage with offline disk
1037 * add Windows 7 PCIe quirk for adding 'hostpci' devices
1039 * fix #2032: check that type is set before assembling a VGA device
1041 * add configuration to command regression tests
1043 * allow 'none' as VGA option
1045 * fix #1267: move args to the end of qemu commandline
1047 * clone_disk : cloudinit drive: don't clone snapshot name (snapname)
1049 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Dec 2018 10:17:47 +0100
1051 qemu-server (5.0-43) unstable; urgency=medium
1053 * usb: fix check if machine type is q35
1055 * qm cleanup: exit silently if VM config does not belong to node
1058 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Nov 2018 12:57:49 +0100
1060 qemu-server (5.0-42) unstable; urgency=medium
1062 * add mediated devices support
1064 * use improved lspci
1066 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Nov 2018 11:22:04 +0100
1068 qemu-server (5.0-41) unstable; urgency=medium
1070 * fix #1959: add fallback for auto previously set by SLAAC
1072 * create_vm: don't add vmgenid for ARM machines by default
1074 * use qmeventd to execute qm cleanup
1076 * QemuServer: remove PCI sysfs helpers
1078 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2018 14:38:42 +0100
1080 qemu-server (5.0-40) unstable; urgency=medium
1082 * correctly check display vga type
1084 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Nov 2018 17:27:53 +0100
1086 qemu-server (5.0-39) unstable; urgency=medium
1088 * Add `ssd` property to IDE, SATA, and SCSI drives
1090 * fix #1952: make vga memory configurable
1092 * fix #1969: increase max unused disks
1094 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Nov 2018 16:23:26 +0100
1096 qemu-server (5.0-38) unstable; urgency=medium
1098 * add second qmp socket when running qemu >= 2.12 for pending event/reboot
1101 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Oct 2018 12:28:49 +0200
1103 qemu-server (5.0-37) unstable; urgency=medium
1105 * add virtio to the list of valid gpu types
1107 * lower qemu requirement for hv_synic and hv_stimer to 2.12
1109 * prepare for deprecated functionality in qemu 3.0
1111 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Oct 2018 14:53:04 +0200
1113 qemu-server (5.0-36) unstable; urgency=medium
1115 * fix #1908: add VM Generation ID (vmgenid) device by default on new VMs and
1116 allow to set on existing ones
1118 * fix version check in qemu_machine_feature_enabled
1120 * use qemu's internal blockdev-snapshot functions to avoid some issues with
1121 snapshots on qcow2 files
1123 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2018 11:14:32 +0200
1125 qemu-server (5.0-35) unstable; urgency=medium
1127 * add hv_synic and hv_stimer HyperV Enlightment flags on QEMU 3.0 and later
1129 * improve setting QEMU machine type on snapshot and rollback
1131 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Sep 2018 15:29:18 +0200
1133 qemu-server (5.0-34) unstable; urgency=medium
1135 * fix #1865: CloudInit doesn't add IPv6
1137 * allow to add ibpb, ssbd, virt-ssbd, amd-ssbd, amd-no-ssb and pdpe1gb CPU flags
1139 * clone: improve message for ignoring pending changes
1141 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Sep 2018 11:37:24 +0200
1143 qemu-server (5.0-33) unstable; urgency=medium
1145 * fix #1242: allow one to setup an automatic QEMU guest agent fstrim
1146 command after cloning or moving a disk live
1148 * define return properties for vmstatus API call
1150 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2018 14:40:46 +0200
1152 qemu-server (5.0-32) unstable; urgency=medium
1154 * api/agent: do not dereference parameter hash before passing to
1157 * api/agent: import check_agent_error method
1159 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:55:42 +0200
1161 qemu-server (5.0-31) unstable; urgency=medium
1163 * fix #1717: delete snapshot when vm running and drive not attached
1165 * fix qemu agent commands: add missing import of 'agent_cmd' method
1167 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:24:27 +0200
1169 qemu-server (5.0-30) unstable; urgency=medium
1171 * Fix SPICE multi-monitor mode on VMs using q35 machine type
1173 * extend QEMU guest agent API with file read/write, setting VM user password
1174 and executing arbitrary commands in VM
1176 * add guest command group to qm CLI tool
1178 * add 'dryrun' to qm rescan, which only list changes but does not actually
1181 * add a workaround for bug #1650: add content type filter to rescan
1183 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jul 2018 11:39:01 +0200
1185 qemu-server (5.0-29) unstable; urgency=medium
1187 * reserve new VM config with create lock early
1189 * api: allow auto vm start after create finished
1191 * use 'system_wakeup' to resume VMs suspended by their guest OS
1193 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jun 2018 12:11:29 +0200
1195 qemu-server (5.0-28) unstable; urgency=medium
1197 * cloud-init: improve handling of network settings for broken
1198 versions (e.g., the one currently used by CentOS 7)
1200 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jun 2018 12:48:42 +0200
1202 qemu-server (5.0-27) unstable; urgency=medium
1204 * qm agent: check if qga service is running
1206 * fix #1779: vzdump: ensure guest-fsfreeze-thaw is called on error
1208 * fix #1780: change datacenter.conf to datacenter.cfg in description
1210 * fix logic of deleting balloon config property
1212 * activate volume for cloudinit disk
1214 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Jun 2018 15:24:14 +0200
1216 qemu-server (5.0-26) unstable; urgency=medium
1218 * fix #1749: do not copy pending changes when cloning a vm
1220 * make q35 and virtio-scsi-single compatible
1222 * fix an issue where cleanup operations run as part of a VM's systemd scope
1224 * associate cloud-init options with with the VM.Config.Network permission
1226 -- Proxmox Support Team <support@proxmox.com> Mon, 14 May 2018 14:04:26 +0200
1228 qemu-server (5.0-25) unstable; urgency=medium
1230 * fix #1697: only check machine type for pxe
1232 * fix scsi hotplug issue with q35 machines
1234 * fix live migration with local disk issue with nbd
1236 * switch to new method of passing disk serials to qemu
1238 * qemu-img convert: use cache=none for ZFS to not fill up the ARC
1240 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Apr 2018 15:11:58 +0200
1242 qemu-server (5.0-24) unstable; urgency=medium
1244 * use pve-edk2-firmware for supporting OVMF
1246 * restore: implement rate limiting
1248 * stop passing default '-k' (keyboard) QEMU option from datacenter.cfg
1250 * create linked clones of templates by default
1252 * remove legacy vm_monitor_command
1254 * start: always stop an existing $vmid.scope
1256 * implement cloudinit support
1258 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Mar 2018 09:24:08 +0100
1260 qemu-server (5.0-23) unstable; urgency=medium
1262 * fix migrate cache size parameter for qemu 2.11
1264 * typo fixes in migrate task log
1266 * depend on pve-qemu-kvm >= 2.9.1-9
1268 * allow virtio-scsi+iothread controller hot-unplug
1270 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Feb 2018 13:21:08 +0100
1272 qemu-server (5.0-22) unstable; urgency=medium
1274 * fix #1664: nbd mirror: remove socat tunnel now that it is not required
1275 anymore to avoid a 30s inactivity timeout
1277 * fix #1569: add shared flag to disks
1279 * fix #1662: make the 'snapshot' disk parameter work again
1281 * correct 'snapshot' flag description
1283 * CPU types: add EPYC and EPYC-IBPB
1285 * forward returned errors from guest-agent commands
1287 * add new guest-agent commands and add commands as separate api calls
1289 * add agent flag to vm status api call
1291 * clone/restore: make the smbios UUID unique if --unique is used
1293 * add serial:1 to vm-status when config has a serial device configured
1295 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Feb 2018 09:56:08 +0100
1297 qemu-server (5.0-21) unstable; urgency=medium
1299 * fix a case where with the upcoming introduction of sub-commands the spice
1300 ticket could be read from a file rather than received via stdin
1302 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 15:13:23 +0100
1304 qemu-server (5.0-20) unstable; urgency=medium
1306 * added spec-ctrl flag to cpu 'flags' property
1308 * added -IBRS cpu type variants
1310 * added Skylake-Server cpu type
1312 * added --pretty option to 'qm showcmd'
1314 * increase start timeout when hugepages are enabled to compensate for long
1317 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jan 2018 14:26:30 +0100
1319 qemu-server (5.0-19) unstable; urgency=medium
1321 * add 'flags' property to cpu option to allow passing PCID support to VMs
1323 * fix efi disk format detection
1325 * use default values from load_defaults() when none is specified in conf
1327 -- Proxmox Support Team <support@proxmox.com> Tue, 9 Jan 2018 15:49:35 +0100
1329 qemu-server (5.0-18) unstable; urgency=medium
1331 * fix #1570: fix template backup with pigz
1333 * fix #1471: change keyboard default to undef
1335 * fix efi disks in raw mode not being fully writable
1337 * qm terminal: add --escape option to change or disable the escape key
1339 * enable vncproxy with vncterm for serial ports
1341 * add termproxy api call
1343 * stop adding the same disk as unused multiple times when they are reachable
1344 through multiple storage definitions
1346 * check if the guest agent actually runs before a fsfreeze-freeze/thaw
1348 * update ostype documentation
1350 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Dec 2017 14:56:59 +0100
1352 qemu-server (5.0-17) unstable; urgency=medium
1354 * correct cpuunits range
1356 * check if base volumes are unused before deleting a template
1358 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Oct 2017 14:58:00 +0200
1360 qemu-server (5.0-16) unstable; urgency=medium
1362 * add new qm command 'importovf', to create VMs from an OVF manifest
1364 * snapshot: use explicitly configured vmstate storage
1366 * config: add vmstatestorage option
1368 * VM.Snapshot.Rollback privilege added
1370 * migration : enable mtunnel for insecure migration
1372 * ovmf: deprecate old legay ovmf image and refactor
1374 * improve efidisk creation
1376 * efidisk: do not hard code efivar base image size
1378 * fix #1441: do not unplug controllers when the mirroring is finished
1380 * do not overwrite global signal handlers
1382 * update_vm: sort logged parameters
1384 * remove legacy sparsecp
1386 * remove unused obsolete vmtar
1388 * fix #1125: check for KVM support before starting VM
1390 -- Proxmox Support Team <support@proxmox.com> Thu, 5 Oct 2017 11:17:26 +0200
1392 qemu-server (5.0-15) unstable; urgency=medium
1394 * reduce migration downtime
1396 * fix freezing logic when saving vm states
1398 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Aug 2017 10:46:33 +0200
1400 qemu-server (5.0-14) unstable; urgency=medium
1402 * fix disk throttle parameters
1404 * improve compatibility when live-migrating from pve-4
1406 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Jul 2017 11:17:53 +0200
1408 qemu-server (5.0-13) unstable; urgency=medium
1410 * Fix #1417: make sure the target storage allows disk images before importing
1412 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Jul 2017 06:48:43 +0200
1414 qemu-server (5.0-12) unstable; urgency=medium
1416 * Use default values when memory is not set in vm.conf when migrating
1418 -- Proxmox Support Team <support@proxmox.com> Mon, 03 Jul 2017 14:39:25 +0200
1420 qemu-server (5.0-11) unstable; urgency=medium
1422 * Fix #1417: properly check for 'images' content type when allocating disks
1424 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Jun 2017 09:33:17 +0200
1426 qemu-server (5.0-10) unstable; urgency=medium
1428 * don't use cirrus by default for sane OS'
1430 * replication: remove guest states to ensure no old states are exists
1432 * allow disks on shared storages on replicated VMs
1434 * refuse to add non-replicatable disks to replicating VMs
1436 * config: has_feature() take default for backup into account
1438 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jun 2017 13:26:38 +0200
1440 qemu-server (5.0-9) unstable; urgency=medium
1442 * migrate: use 'mtunnel' from pvecm
1444 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 11:01:15 +0200
1446 qemu-server (5.0-8) unstable; urgency=medium
1448 * migrate: pass the with_snapshots parameter
1450 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 12:58:33 +0200
1452 qemu-server (5.0-7) unstable; urgency=medium
1454 * PVE/QemuMigrate.pm: use new replication job helpers from AbstractMigrate
1456 * Change target in replication-state when replication direction is switched
1458 * PVE/QemuMigrate.pm: use replication job, transfer replication state
1460 * add regression tests for get_replicatable_volumes
1462 * get_replicatable_volumes: fix CDROM and local file/device handling
1464 * get_replicatable_volumes: add unused volumes
1466 * get_replicatable_volumes: skip volumes if we do not 'own' them
1468 * PVE::QemuServer::foreach_volid - pass $attr hash to callback
1470 * get_replicatable_volumes: skip volumes on shared storage
1472 * PVE/API2/Qemu.pm: aquire guest_migration_lock inside worker
1474 * Add a migration lock to avoid a replication on rollback-time
1476 * change from dpkg-deb to dpkg-buildpackage
1478 * fix #1405: sort pci ids by functions
1480 * Add new qm command 'importdisk' to import external disk images
1482 * migration: implement insecure offline migration
1484 * check also pending changes when reverting/deleting
1486 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 08:50:45 +0200
1488 qemu-server (5.0-6) unstable; urgency=medium
1490 * fix burst length parameter names and pass them to qemu
1492 * fix #1229: more explicit spice port allocation
1494 * migrate: acquire guest_migration_lock during migration
1496 * do not allow destroy if there are replication jobs
1498 * use new PVE::ReplicationConfig class
1500 * improve error on '{full, linked} clone not available' error
1502 * Fix #1384: add missing decrement to calculation of socket-id
1504 * migrate: pass ssh_info to storage_migrate
1506 * tests: fix broken snapshot create tests
1508 * tests: fix broken snapshot delete tests
1510 * use ReuseAddr for vncproxy
1512 * Fix #1361: create disk: stricter parsing of storage:size
1514 * PVE::QemuServer::create_disks - run code inside eval
1516 * implement get_replicatable_volumes
1518 * add description of read/writes statistics in vzdump output
1520 * start vncproxy worker in the background
1522 -- Proxmox Support Team <support@proxmox.com> Wed, 31 May 2017 09:21:27 +0200
1524 qemu-server (5.0-5) unstable; urgency=medium
1526 * added rerror option to scsi drives
1528 * added storage replication settings
1530 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Apr 2017 14:02:08 +0200
1532 qemu-server (5.0-4) unstable; urgency=medium
1534 * fix target storage availability check for live migration with local
1537 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 12:05:58 +0200
1539 qemu-server (5.0-3) unstable; urgency=medium
1541 * fix vnc connections showing false errors
1543 * fix #1338: handle writer count limit in live migration with local disks
1546 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 11:47:07 +0200
1548 qemu-server (5.0-2) unstable; urgency=medium
1550 * fix drive mirror readyness check
1552 * fix uninitialized warning when deleting unset VM option
1554 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Apr 2017 16:27:59 +0200
1556 qemu-server (5.0-1) unstable; urgency=medium
1558 * bump version for stretch
1560 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:59:35 +0100
1562 qemu-server (4.0-109) unstable; urgency=medium
1564 * drop netcat6 dependency
1566 * fix a case where VMs refuse to start with scsi disk ids >= 7
1568 * add skylake to cpu models
1570 * improve error messages
1572 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:56:14 +0100
1574 qemu-server (4.0-109) unstable; urgency=medium
1578 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Feb 2017 11:40:53 +0100
1580 qemu-server (4.0-108) unstable; urgency=medium
1582 * #1260: convert moved template disk to base
1584 * change TLS cipher suite to HIGH for spiceterm
1586 -- Proxmox Support Team <support@proxmox.com> Tue, 31 Jan 2017 13:54:42 +0100
1588 qemu-server (4.0-107) unstable; urgency=medium
1590 * add dependency on libpve-guest-common-perl
1592 * add dependency on libpve-common-perl
1594 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:47:09 +0100
1596 qemu-server (4.0-106) unstable; urgency=medium
1598 * only use scsi-block with explicit opt-in
1600 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:19:20 +0100
1602 qemu-server (4.0-105) unstable; urgency=medium
1604 * use new PVE::Storage::check_volume_access()
1606 * Set zero $size and continue if volume_resize() returns false
1608 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Jan 2017 09:19:45 +0100
1610 qemu-server (4.0-104) unstable; urgency=medium
1612 * add setup_environment hook to CLIHandler classes
1614 * cleanup: drop superfluous condition in assignment
1616 * add romfile option to hostpci
1618 * add with-local-disks option for live storage migration
1620 * drive-mirror: bump timeout to 5s, add 30s inactivity timeout
1622 * live clone_vm: suspend or freezefs before block-job-cancel
1624 * add socat and unix socket for storage migration
1626 * add live storage migration with vm migration
1628 * clone live vm : add support for multiple jobs
1630 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Jan 2017 14:15:01 +0100
1632 qemu-server (4.0-103) unstable; urgency=medium
1634 * destroy_vm: allow vdisk_free to fail
1636 * Display volume size in log when doing a volume backup
1638 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Dec 2016 12:40:40 +0100
1640 qemu-server (4.0-102) unstable; urgency=medium
1642 * avoid "No balloon device has been activated" warnings in vmstatus
1644 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2016 10:12:55 +0100
1646 qemu-server (4.0-101) unstable; urgency=medium
1648 * allow migration of local qcow2 snapshots
1650 -- Proxmox Support Team <support@proxmox.com> Mon, 5 Dec 2016 12:38:54 +0100
1652 qemu-server (4.0-100) unstable; urgency=medium
1654 * allow insecure migrations from older qemu-servers
1656 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Dec 2016 18:50:54 +0100
1658 qemu-server (4.0-99) unstable; urgency=medium
1660 * qm agent: remove 'guest-' prefix from commands
1662 * qm agent: pass command as second required argument
1664 * qm agent: add output formatter
1666 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Dec 2016 07:58:34 +0100
1668 qemu-server (4.0-98) unstable; urgency=medium
1670 * Add "qm agent" command
1672 * increase timeout for guest-fsfreeze-freeze
1674 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2016 12:31:36 +0100
1676 qemu-server (4.0-97) unstable; urgency=medium
1678 * Add entry for windows 10 and 2016 support
1680 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2016 09:09:23 +0100
1682 qemu-server (4.0-96) unstable; urgency=medium
1684 * restrict monitor API to Sys.Modify for most commands
1686 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 10:02:37 +0100
1688 qemu-server (4.0-95) unstable; urgency=medium
1690 * vm_shutdown: request 'stopped' state for HA enabled VMs
1692 * use ha-manager 'stopped' state instead of 'disabled'
1694 * switch to 'ha-manager set' (instead of 'ha-manager start/stop')
1696 * vmstate snapshot: activate|deactivate volume
1698 * qemu_volume_snapshot_delete : fix krbd snapshot delete
1700 * VZDump/QemuServer: set bless class correctly
1702 * cleanup windows version handling and hyperv enlightments
1704 * remove unnecessary format_description properties
1706 * register new standard option 'pve-qm-image-format'
1708 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 08:11:08 +0100
1710 qemu-server (4.0-94) unstable; urgency=medium
1712 * fix docs for iops/bps_max_length throttling options
1714 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 12:53:44 +0100
1716 qemu-server (4.0-93) unstable; urgency=medium
1718 * Close #1195: support iops/bps_max_length throttling options
1720 * fix a perl warning when failing to parse a new drive string
1722 * fix a warning: discard is not a number
1724 * fix #1177: allow dedicated migration network
1726 * change default value for cpuunits to 1024
1728 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 10:26:03 +0100
1730 qemu-server (4.0-92) unstable; urgency=medium
1732 * Close #351: add more info to backup log
1734 * add qm listsnapshot call
1736 * snapshot_list: add bash completion for vmid
1738 * Fix #1174: remove pve-qm-drive
1740 * enable drive-mirror with iothread for qemu 2.7 v2
1742 * add get_running_qemu_version
1744 * cpu hotplug : add new cpu hotplug method for qemu 2.7
1746 * cpu hotplug : add coldplugged cpu to qemu command line
1748 * cpu hotplug : add print_cpu_device
1750 * numaX : use cpus option multiple time if cpulist
1752 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Oct 2016 09:13:39 +0200
1754 qemu-server (4.0-91) unstable; urgency=medium
1756 * fix #1131: activate volume before copying efidisk
1758 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Oct 2016 08:21:19 +0200
1760 qemu-server (4.0-90) unstable; urgency=medium
1762 * fix #1111: qm showcmd wrong escape sequence
1764 * Avoid to parse empty property string
1766 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2016 07:13:33 +0200
1768 qemu-server (4.0-89) unstable; urgency=medium
1770 * fix manual page (use efidisk0 instead of efidisk[N])
1772 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Sep 2016 12:21:07 +0200
1774 qemu-server (4.0-88) unstable; urgency=medium
1776 * restore: better error handling for vdisk deletion
1778 * forbid migration of template with local base image
1780 * forbid restore into existing template
1782 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Sep 2016 07:49:45 +0200
1784 qemu-server (4.0-87) unstable; urgency=medium
1786 * add seabios bootsplash and use it
1788 * add efidisk0 to config, use efidisk0 for efivars
1790 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Sep 2016 12:34:23 +0200
1792 qemu-server (4.0-86) unstable; urgency=medium
1794 * hostpci: bring back multifunction pass-through shortcut
1796 * disable drive-mirror when iothread is enabled
1798 * hugepages: map numa node IDs to host and guest correctly
1800 * hugepages: use hostnodes value as numanode for topology
1802 * qemu-img convert : use default cache=unsafe instead writeback
1804 * Fix #1057: make protection a fast-plug option
1806 * add lock check for move_disk API call
1808 * deactivate new volumes after clone to other node
1810 * pass datacenter.cfg's mac_prefix to random_ether_addr
1812 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Aug 2016 10:11:07 +0200
1814 qemu-server (4.0-85) unstable; urgency=medium
1816 * Fix #1051: typo: vpcus -> vcpus - so non-root users can change vcpus again
1818 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 14:46:43 +0200
1820 qemu-server (4.0-84) unstable; urgency=medium
1822 * fix #1046: add non-snapshotted disks as unused
1824 * fix #1040: warn early about moving a snapshotted disk
1826 * disable usb hotplug for now
1828 * remove old move disk snapshot check
1830 * improve errors when trying to migrate disks with snapshots
1832 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 11:50:01 +0200
1834 qemu-server (4.0-83) unstable; urgency=medium
1836 * Add hugepages option
1838 * Refactor various parts out of QemuServer
1840 * Include USB devices in vm_devices_list
1842 * Add usb hotplugging
1844 * Fix syntax in pve-q35.cfg
1846 * Fix #146: add name to backup log
1848 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Jun 2016 11:29:01 +0200
1850 qemu-server (4.0-82) unstable; urgency=medium
1852 * add dependency on DBus
1854 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jun 2016 11:48:45 +0200
1856 qemu-server (4.0-81) unstable; urgency=medium
1858 * Add LVM and LVMThin to QemuMigration
1860 * add check for snapshots at migration
1862 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Jun 2016 12:10:48 +0200
1864 qemu-server (4.0-80) unstable; urgency=medium
1866 * split old style pipe open call
1868 * fix #1020: remove unnecessary root check for unused disks
1870 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jun 2016 18:13:03 +0200
1872 qemu-server (4.0-79) unstable; urgency=medium
1874 * migrate: collect migration tunnel child process (avoid zombies)
1876 * migrate: use ssh forwarded UNIX socket tunnel
1878 * migrate: add some more log output
1880 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 12:16:31 +0200
1882 qemu-server (4.0-78) unstable; urgency=medium
1884 * use enter_systemd_scope instead of systemd-run
1886 * fix #1010: whitelist options for permissions
1888 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 11:42:25 +0200
1890 qemu-server (4.0-77) unstable; urgency=medium
1892 * do not ignore hotplug parse errors
1894 -- Proxmox Support Team <support@proxmox.com> Tue, 31 May 2016 12:15:55 +0200
1896 qemu-server (4.0-76) unstable; urgency=medium
1898 * allow VLAN 1 tag in qemu-kvm vms
1900 -- Proxmox Support Team <support@proxmox.com> Wed, 18 May 2016 11:25:54 +0200
1902 qemu-server (4.0-75) unstable; urgency=medium
1904 * fix #975, use new keyAlias feature.
1906 * add --description to systemd scope unit
1908 -- Proxmox Support Team <support@proxmox.com> Wed, 11 May 2016 11:15:56 +0200
1910 qemu-server (4.0-74) unstable; urgency=medium
1912 * correctly set cpu vendor
1914 * fix #971: don't activate shared storage in offline migration
1916 * migrate: check if storage is available
1918 -- Proxmox Support Team <support@proxmox.com> Sun, 01 May 2016 09:25:06 +0200
1920 qemu-server (4.0-73) unstable; urgency=medium
1922 * restore: pass format to vma extract
1924 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Apr 2016 09:03:12 +0200
1926 qemu-server (4.0-72) unstable; urgency=medium
1928 * vm_start : force systemctl stop if orphan scope exist
1930 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Apr 2016 11:09:52 +0200
1932 qemu-server (4.0-71) unstable; urgency=medium
1934 * Fix #643: activate volumes before resizing
1936 * fix #947: reenable disk/cdrom passthrough
1938 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Apr 2016 10:34:42 +0200
1940 qemu-server (4.0-70) unstable; urgency=medium
1942 * vm_status: return more verbose HA state
1944 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Apr 2016 09:01:24 +0200
1946 qemu-server (4.0-69) unstable; urgency=medium
1948 * Fix #848: deactivate old volume after clone before deletion
1950 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Apr 2016 08:24:49 +0200
1952 qemu-server (4.0-68) unstable; urgency=medium
1954 * change shutdown behaviour on suspended vm
1956 -- Proxmox Support Team <support@proxmox.com> Tue, 12 Apr 2016 17:19:20 +0200
1958 qemu-server (4.0-67) unstable; urgency=medium
1960 * use pve-doc-generator to generate man pages
1962 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Apr 2016 07:37:16 +0200
1964 qemu-server (4.0-66) unstable; urgency=medium
1966 * use generic property string parser
1968 * drive schema: allow 'none' again
1970 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Apr 2016 09:33:16 +0200
1972 qemu-server (4.0-65) unstable; urgency=medium
1974 * cfg: use the 'urlencoded' format for drive model and serial
1976 * clone: use the zeroinit filter for sparseinit storages
1978 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Mar 2016 09:09:07 +0100
1980 qemu-server (4.0-64) unstable; urgency=medium
1982 * Use AbstractConfig for Qemu
1984 * fix #909: pass rate to tap_plug()
1986 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Mar 2016 11:43:28 +0100
1988 qemu-server (4.0-63) unstable; urgency=medium
1990 * only perform scsi inquiry on device nodes
1992 -- Proxmox Support Team <support@proxmox.com> Sat, 27 Feb 2016 10:20:50 +0100
1994 qemu-server (4.0-62) unstable; urgency=medium
1996 * fix undefined value when starting a q35 machine VM
1998 * kvm_user_version: update code to use our framework
2000 * Refactor has_feature
2002 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Feb 2016 17:02:34 +0100
2004 qemu-server (4.0-61) unstable; urgency=medium
2006 * clone_vm : only deactivate sources volume if source vm if offline
2008 * Refactor snapshot_create to match LXC.pm
2010 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Feb 2016 08:48:59 +0100
2012 qemu-server (4.0-60) unstable; urgency=medium
2014 * change check for write-zeros
2016 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Feb 2016 17:19:12 +0100
2018 qemu-server (4.0-59) unstable; urgency=medium
2020 * qemu_machine_pxe : return $machine if no pxe
2022 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Feb 2016 17:37:11 +0100
2024 qemu-server (4.0-58) unstable; urgency=medium
2026 * deactivate volumes if vm start command fails
2028 -- Proxmox Support Team <support@proxmox.com> Sat, 20 Feb 2016 10:26:28 +0100
2030 qemu-server (4.0-57) unstable; urgency=medium
2032 * delete ram state files when restoring a backup
2034 * Refactor snapshot code
2036 * disable vnc server and add -nographic is no vga card is present
2038 * passthrough : reenable hyperv and add hv_vendor_id for windows
2040 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Feb 2016 12:47:51 +0100
2042 qemu-server (4.0-56) unstable; urgency=medium
2044 * If we freeze the fs with the Qemu-Guest-Agent test if QGA is running.
2046 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2016 12:51:19 +0100
2048 qemu-server (4.0-55) unstable; urgency=medium
2050 * improve usb config parsing
2052 * Refactor update_config_nolock -> write_config
2054 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Feb 2016 12:07:56 +0100
2056 qemu-server (4.0-54) unstable; urgency=medium
2058 * restore: deal with new backup=0 property string
2060 * add usb3 option for usb-devices
2062 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Feb 2016 17:49:19 +0100
2064 qemu-server (4.0-53) unstable; urgency=medium
2066 * pass $skiplock all the way through to destroy_vm
2068 -- Proxmox Support Team <support@proxmox.com> Mon, 08 Feb 2016 11:53:03 +0100
2070 qemu-server (4.0-52) unstable; urgency=medium
2072 * close tunnel after migration is finish.
2074 -- Proxmox Support Team <support@proxmox.com> Tue, 02 Feb 2016 18:16:47 +0100
2076 qemu-server (4.0-51) unstable; urgency=medium
2078 * Fix #878: disk-size format
2080 * Fix #879: exclusion of disk for backup
2082 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Jan 2016 10:04:41 +0100
2084 qemu-server (4.0-50) unstable; urgency=medium
2086 * add hidden option to cpu type
2088 * fix PVE::HA use clause so HA resources get registered
2090 * Create firewall dir on VM restore
2092 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 16:57:43 +0100
2094 qemu-server (4.0-49) unstable; urgency=medium
2096 * increase version to update test environment
2098 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 12:50:07 +0100
2100 qemu-server (4.0-48) unstable; urgency=medium
2102 * use safe_string_ne for trunks
2104 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Jan 2016 16:58:23 +0100
2106 qemu-server (4.0-47) unstable; urgency=medium
2108 * add support for network trunks
2110 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jan 2016 17:27:32 +0100
2112 qemu-server (4.0-46) unstable; urgency=medium
2114 * Closes #787: add Haswell-noTSX and Broadwell-noTSX cpu types
2116 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 16:42:05 +0100
2118 qemu-server (4.0-45) unstable; urgency=medium
2120 * io throttle: pass pool parameters (*_max)
2122 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 06:17:52 +0100
2124 qemu-server (4.0-44) unstable; urgency=medium
2126 * ovmf : don't pass x-vga to vfio-pci
2128 * check for quorum when starting a VM
2130 -- Proxmox Support Team <support@proxmox.com> Sun, 10 Jan 2016 15:11:43 +0100
2132 qemu-server (4.0-43) unstable; urgency=medium
2134 * disable hyper-v enlightment when xvga is enabled
2136 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Jan 2016 06:26:31 +0100
2138 qemu-server (4.0-42) unstable; urgency=medium
2140 * add detect_zeroes option
2142 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Dec 2015 09:20:18 +0100
2144 qemu-server (4.0-41) unstable; urgency=medium
2146 * add new option to select BIOS (--bios <seabios|ovmf>)
2148 * fix bug #841: replace get_used_paths with is_volume_in_use
2150 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 11:15:23 +0100
2152 qemu-server (4.0-40) unstable; urgency=medium
2154 * qm: Add VMID auto completion to some commands
2156 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Dec 2015 12:22:25 +0100
2158 qemu-server (4.0-39) unstable; urgency=medium
2160 * fix bug #828: activate disks before hotplugging them
2162 * fix bug #783: set KillMode=none, so that systemd don't kill
2165 * reenable steal time
2167 * backup/restore firewall config with vzdump
2169 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Nov 2015 16:50:11 +0100
2171 qemu-server (4.0-38) unstable; urgency=medium
2173 * Don't treat serial devices as a local resource if they
2176 * qemu_img_convert: activate source volume
2178 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Nov 2015 07:02:01 +0100
2180 qemu-server (4.0-37) unstable; urgency=medium
2182 * add pve-bridge-hotplug script
2184 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 16:24:44 +0100
2186 qemu-server (4.0-36) unstable; urgency=medium
2188 * use qom-get to check if old pxe network rom file are used
2190 * migration: improve ipv6 case
2192 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 07:56:14 +0100
2194 qemu-server (4.0-35) unstable; urgency=medium
2196 * clone: use a fullclone hash instead of $drive->{full}
2198 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Oct 2015 07:06:47 +0100
2200 qemu-server (4.0-34) unstable; urgency=medium
2202 * use old netdevice bios files for older machine types (<= 2.4)
2204 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2015 09:08:49 +0100
2206 qemu-server (4.0-31) unstable; urgency=medium
2208 * migrate : add nocheck for resume
2210 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2015 12:41:43 +0200
2212 qemu-server (4.0-30) unstable; urgency=medium
2214 * qmrestore: implement bash completion
2216 * create: add better check for unused IDs
2218 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Oct 2015 13:13:07 +0200
2220 qemu-server (4.0-29) unstable; urgency=medium
2222 * support serial numbers and models for disks
2224 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Sep 2015 10:56:30 +0200
2226 qemu-server (4.0-28) unstable; urgency=medium
2228 * disable kvm_steal_time, because it's currently buggy with live migration
2230 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 07:14:44 +0200
2232 qemu-server (4.0-27) unstable; urgency=medium
2234 * allow to change boot order with VM.Config.Options privileges
2236 -- Proxmox Support Team <support@proxmox.com> Sat, 26 Sep 2015 11:07:11 +0200
2238 qemu-server (4.0-26) unstable; urgency=medium
2240 * migration: disable compress (already default)
2242 * migration: enable xbzrle
2244 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Sep 2015 17:59:30 +0200
2246 qemu-server (4.0-25) unstable; urgency=medium
2248 * fix kvm version parser for CVE stable releases
2250 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Sep 2015 11:48:09 +0200
2252 qemu-server (4.0-24) unstable; urgency=medium
2254 * improve VM protection mode
2256 * pci passthough : make vfio default
2258 * fix error message: allocate to much v-CPUs
2260 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Sep 2015 12:28:19 +0200
2262 qemu-server (4.0-23) unstable; urgency=medium
2264 * destroy: avoid warning about undefined 'protection' value
2266 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Sep 2015 09:38:30 +0200
2268 qemu-server (4.0-22) unstable; urgency=medium
2270 * add possibility to restore backup on rbd in krbd mode
2272 * add krbd support to online snapshot
2274 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Sep 2015 07:55:31 +0200
2276 qemu-server (4.0-21) unstable; urgency=medium
2278 * qm: implement bash completion
2280 * add VM protection mode
2282 * fix move_disk on RBD
2284 * add HA resources check before destroying a VM
2286 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Sep 2015 10:51:05 +0200
2288 qemu-server (4.0-20) unstable; urgency=medium
2290 * fix start kvm with os type 'other'
2292 * spice console: fix 'uninitialized value in concat' due to unnamed VM
2294 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Aug 2015 11:39:52 +0200
2296 qemu-server (4.0-19) unstable; urgency=medium
2298 * clone: also copy vm firewall config file
2300 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Aug 2015 06:50:04 +0200
2302 qemu-server (4.0-18) unstable; urgency=medium
2304 * fix bug #688: if vm is not owner of this disk remove from config
2306 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2015 12:30:52 +0200
2308 qemu-server (4.0-17) unstable; urgency=medium
2310 * fix bug #603: vmid.fw file not deleted
2312 * fix bug #517: improve error message
2314 * adapt /config and /pending API calls to force-delete
2316 -- Proxmox Support Team <support@proxmox.com> Wed, 19 Aug 2015 15:44:53 +0200
2318 qemu-server (4.0-16) unstable; urgency=medium
2320 * remove vm access permissions after destroy
2322 * pending-delete: remember force-deletes
2324 * correctly handle empty description in pending section
2326 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Aug 2015 08:09:44 +0200
2328 qemu-server (4.0-15) unstable; urgency=medium
2330 * Fixed wrong UUID in Qemu VZDump backup
2332 * add memory_unplug support V2
2334 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jul 2015 11:32:51 +0200
2336 qemu-server (4.0-14) unstable; urgency=medium
2338 * fixed bug 662: wrong subroutine for parsing startup order
2340 * cpuflags : don't enforce with tcg mode
2342 * cpuflags : remove enforce for cpumodel=host
2344 * cpuflags : remove -rdtscp for Opteron cpu models
2346 * vzdump : abord backup if disk have iothread enabled
2348 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Jul 2015 13:24:31 +0200
2350 qemu-server (4.0-13) unstable; urgency=medium
2352 * drive-mirror: now allow interrupts at the scanning bitmap phase
2354 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Jul 2015 06:40:52 +0200
2356 qemu-server (4.0-12) unstable; urgency=medium
2358 * remove outdated host_device format
2360 * parse_drive: do not overwrite configured format
2362 * fix aio O_DIRECT check for cdrom drives
2364 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Jun 2015 10:32:09 +0200
2366 qemu-server (4.0-11) unstable; urgency=medium
2368 * activate-noawait pve-api-updates
2370 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Jun 2015 12:36:15 +0200
2372 qemu-server (4.0-10) unstable; urgency=medium
2374 * implement cgroups through systemd-run
2376 * implement hotplug for cpuunits
2378 * remove old openvz fairscheduler code
2380 -- Proxmox Support Team <support@proxmox.com> Fri, 29 May 2015 08:24:33 +0200
2382 qemu-server (4.0-9) unstable; urgency=medium
2384 * qmp drive-mirror : set big timeout
2386 * qemu-mirror : block job complete : use ready flag
2388 -- Proxmox Support Team <support@proxmox.com> Tue, 12 May 2015 08:19:38 +0200
2390 qemu-server (4.0-8) unstable; urgency=medium
2392 * trigger pve-api-updates event
2394 -- Proxmox Support Team <support@proxmox.com> Tue, 05 May 2015 14:57:55 +0200
2396 qemu-server (4.0-7) unstable; urgency=medium
2398 * cleanup: use new standard option 'pve-startup-order'
2400 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Apr 2015 10:04:04 +0200
2402 qemu-server (4.0-6) unstable; urgency=medium
2404 * fix ha resource names
2406 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Apr 2015 13:11:12 +0200
2408 qemu-server (4.0-5) unstable; urgency=medium
2410 * use new pve-ha-manager
2412 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Mar 2015 12:48:41 +0100
2414 qemu-server (4.0-4) unstable; urgency=medium
2416 * add qemu cpu flags optimisations for kernel 3.10
2418 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Mar 2015 08:58:56 +0100
2420 qemu-server (4.0-3) unstable; urgency=medium
2422 * vmstatus: use vcpus if defined
2424 * balloon: use qom-get for guest balloon statistics
2426 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2015 08:22:47 +0100
2428 qemu-server (4.0-2) unstable; urgency=medium
2430 * drive_add: escape \ character
2432 * bugfix: allow manual balloning if shares = 0
2434 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2015 10:21:52 +0100
2436 qemu-server (4.0-1) unstable; urgency=medium
2438 * updated for debian jessie
2440 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Feb 2015 13:00:56 +0100
2442 qemu-server (3.3-20) unstable; urgency=low
2444 * correctly set an remove lock (fix "qm unlock")
2446 -- Proxmox Support Team <support@proxmox.com> Sun, 15 Feb 2015 09:05:40 +0100
2448 qemu-server (3.3-19) unstable; urgency=low
2450 * commit pending values when changing CDROM
2452 -- Proxmox Support Team <support@proxmox.com> Sat, 14 Feb 2015 09:24:03 +0100
2454 qemu-server (3.3-18) unstable; urgency=low
2456 * bugfix : add missing queues nic option in print_net
2458 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Feb 2015 09:05:21 +0100
2460 qemu-server (3.3-17) unstable; urgency=low
2464 * This fix hotplug for devices behind bridges
2466 * check possibility to rollback a snapshot early
2468 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Feb 2015 08:19:02 +0100
2470 qemu-server (3.3-16) unstable; urgency=low
2472 * QemuServer: fix wrong binding of pci root ports, bridges or switches
2475 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2015 06:32:14 +0100
2477 qemu-server (3.3-15) unstable; urgency=low
2479 * code cleanup: add foreach_dimm sub
2481 * hotplug: memory hotplug option is not hotpluggable
2483 * fix bug 597: hotplug fix
2485 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Feb 2015 07:05:05 +0100
2487 qemu-server (3.3-14) unstable; urgency=low
2489 * include memory hotplug patch
2491 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jan 2015 07:11:10 +0100
2493 qemu-server (3.3-13) unstable; urgency=low
2495 * hotplug config: allow to enable specific features
2497 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Jan 2015 12:39:21 +0100
2499 qemu-server (3.3-12) unstable; urgency=low
2501 * add new vcpus option
2503 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jan 2015 08:04:44 +0100
2505 qemu-server (3.3-11) unstable; urgency=low
2507 * enable hotplug by default
2509 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jan 2015 08:53:10 +0100
2511 qemu-server (3.3-10) unstable; urgency=low
2513 * Support additional e1000 variants for VM machines
2515 * Add link_down flag to network config
2517 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jan 2015 07:15:48 +0100
2519 qemu-server (3.3-9) unstable; urgency=low
2521 * pending api : fix parsing 0 value
2523 * fix test for ballon hotplug
2525 * set boot strict=on to prevent booting from not listed boot devices
2527 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Jan 2015 06:23:10 +0100
2529 qemu-server (3.3-8) unstable; urgency=low
2531 * new 'pending changes' API
2533 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Jan 2015 13:32:46 +0100
2535 qemu-server (3.3-7) unstable; urgency=low
2537 * vzdump: use qga freeze in vzdump in snapshot mode
2539 * add custom numa topology support
2541 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Dec 2014 17:24:24 +0100
2543 qemu-server (3.3-6) unstable; urgency=low
2545 * API change: snapshot_create - remove unused freezefs flag.
2547 * snapshot_create: call fsfreeze if agent flag is set
2549 * qmpclient: use guest-sync-delimited
2551 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Dec 2014 12:34:50 +0100
2553 qemu-server (3.3-5) unstable; urgency=low
2555 * drive-mirror: cleanups, avoid division by zero bug
2557 * shutdown by Qemu Guest Agent if the agent flag is set
2559 * savevm-end : wait that savevm is finished
2561 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Dec 2014 09:31:17 +0100
2563 qemu-server (3.3-4) unstable; urgency=low
2565 * serial: allow to pass arbitrary device names
2567 * Add check if host has enough real CPUs for starting VM
2569 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Nov 2014 07:42:10 +0100
2571 qemu-server (3.3-3) unstable; urgency=low
2573 * drive-mirror: further improvments
2575 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Nov 2014 06:32:04 +0100
2577 qemu-server (3.3-2) unstable; urgency=low
2579 * drive-mirror: wait that busy eq false before block-job-complete
2581 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Nov 2014 15:35:55 +0100
2583 qemu-server (3.3-1) unstable; urgency=low
2585 * enable write zeroes optimisations
2587 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Oct 2014 10:35:49 +0200
2589 qemu-server (3.1-35) unstable; urgency=low
2591 * fix bug #542: return VMID as integer
2593 -- Proxmox Support Team <support@proxmox.com> Wed, 17 Sep 2014 15:52:34 +0200
2595 qemu-server (3.1-34) unstable; urgency=low
2597 * hotplug: allow scsi and virtio-scsi disk hotplug|unplug
2599 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Sep 2014 11:35:49 +0200
2601 qemu-server (3.1-33) unstable; urgency=low
2603 * clone_vm: auto generate new uuid
2605 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Aug 2014 09:23:58 +0200
2607 qemu-server (3.1-32) unstable; urgency=low
2609 * add Broadwell cpu model
2611 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2014 12:21:08 +0200
2613 qemu-server (3.1-31) unstable; urgency=low
2615 * fix bug 529: fix virtio-serial when using q35 machines
2617 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Aug 2014 06:17:08 +0200
2619 qemu-server (3.1-30) unstable; urgency=low
2621 * bump max hostpci to 4
2623 * set vga=none if x-vga passthrough is enabled
2625 -- Proxmox Support Team <support@proxmox.com> Wed, 06 Aug 2014 09:41:36 +0200
2627 qemu-server (3.1-29) unstable; urgency=low
2629 * vm_stop: do not use ha commands if $migratedfrom is set
2631 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jul 2014 06:53:05 +0200
2633 qemu-server (3.1-28) unstable; urgency=low
2635 * disable kvm cpu signature if x-vga is enabled
2637 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jul 2014 06:52:25 +0200
2639 qemu-server (3.1-27) unstable; urgency=low
2641 * pci passthrough: Reset device only if has_fl_reset is defined
2643 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jul 2014 06:11:49 +0200
2645 qemu-server (3.1-26) unstable; urgency=low
2647 * enable linked clones from snapshots (ceph)
2649 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jul 2014 09:28:47 +0200
2651 qemu-server (3.1-25) unstable; urgency=low
2653 * allow resize of virtio windows boot disk (virtio-win-0.1-74 have
2654 fixed the resize bug)
2656 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jul 2014 12:48:03 +0200
2658 qemu-server (3.1-24) unstable; urgency=low
2660 * new option smbios1: specify SMBIOS type 1 fields (uuid, ...)
2662 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Jun 2014 11:13:27 +0200
2664 qemu-server (3.1-23) unstable; urgency=low
2666 * vncproxy: remove check if VM is running
2668 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:56:02 +0200
2670 qemu-server (3.1-22) unstable; urgency=low
2672 * hostpci: add pci multifunction support
2674 * hostpci: add pcie and x-vga passthrough
2676 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:31:30 +0200
2678 qemu-server (3.1-21) unstable; urgency=low
2680 * protect websocket API with vncticket
2682 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Jun 2014 17:43:25 +0200
2684 qemu-server (3.1-20) unstable; urgency=low
2686 * vncwebsocket: do not proxy connection (not required)
2688 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 12:45:39 +0200
2690 qemu-server (3.1-19) unstable; urgency=low
2692 * do not depend on novnc-pve package (use new HTTPServer feature instead)
2694 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 11:04:48 +0200
2696 qemu-server (3.1-18) unstable; urgency=low
2698 * depend on novnc-pve package
2700 * support webockets for VNC console
2702 * migration : add setup state
2704 * add virtio-net multiqueue support
2706 * add firewall option to qemu network interface
2708 * add initiator-name to iscsi drives if configured
2710 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jun 2014 09:00:03 +0200
2712 qemu-server (3.1-17) unstable; urgency=low
2714 * depend on pve-firewall package
2716 -- Proxmox Support Team <support@proxmox.com> Tue, 06 May 2014 11:28:26 +0200
2718 qemu-server (3.1-16) unstable; urgency=low
2720 * fix bug #502: allow creation of empty vma archives
2722 * fix bug #510: move_disk - don't delete disk if used in a previous snasphot
2724 * qmrestore: removed short timeout
2726 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Apr 2014 09:29:26 +0200
2728 qemu-server (3.1-15) unstable; urgency=low
2730 * correctly disable unwanted migrate features (xbzrle).
2732 * QemuMigrate: print migration xbzrle if enabled
2734 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2014 08:06:29 +0100
2736 qemu-server (3.1-14) unstable; urgency=low
2738 * Add title of VM to Spice Client
2740 * deactivate volume after move_disk
2742 * add cpu_hotplug (and maxcpus config)
2744 * migration : enable auto-converge capability
2746 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Jan 2014 06:49:16 +0100
2748 qemu-server (3.1-13) unstable; urgency=low
2750 * pci passthrough: new option to disable device ROM (rombar=off)
2752 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Dec 2013 11:45:46 +0100
2754 qemu-server (3.1-12) unstable; urgency=low
2756 * spiceproxy: use POST instead of GET
2758 -- Proxmox Support Team <support@proxmox.com> Tue, 10 Dec 2013 10:49:30 +0100
2760 qemu-server (3.1-11) unstable; urgency=low
2762 * depend on pve-qemu-kvm >= 1.7-1
2764 * fix 'qm unlink' command syntax
2766 * add 'pvscsi' to the list of scsi controllers (emulate the VMware
2769 * add 'lsi53c810' to the list of scsi controllers (supported on some
2770 very old Windows NT versions)
2772 * add 'vmxnet3' to the list of available network card models (emulate
2773 VMware paravirtualized network card)
2775 * add drive option 'discard'
2777 * add support for new qemu throttling burst max parameters.
2779 -- Proxmox Support Team <support@proxmox.com> Tue, 03 Dec 2013 10:48:33 +0100
2781 qemu-server (3.1-10) unstable; urgency=low
2783 * add +lahf_lm flag to kvm64 cpudef
2785 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Nov 2013 09:18:39 +0100
2787 qemu-server (3.1-9) unstable; urgency=low
2789 * clone: deactivate volumes after clone to other node
2791 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Nov 2013 08:17:35 +0100
2793 qemu-server (3.1-8) unstable; urgency=low
2795 * clone: correctly check drive options (avoid feature is not available bug)
2797 -- Proxmox Support Team <support@proxmox.com> Mon, 14 Oct 2013 07:36:26 +0200
2799 qemu-server (3.1-7) unstable; urgency=low
2801 * spice: add multi-monitors support
2803 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Oct 2013 09:13:23 +0200
2805 qemu-server (3.1-6) unstable; urgency=low
2807 * use new PVE::Storage::abs_filesystem_path()
2809 * use warnings instead of global -w flag
2811 -- Proxmox Support Team <support@proxmox.com> Tue, 01 Oct 2013 12:42:42 +0200
2813 qemu-server (3.1-5) unstable; urgency=low
2815 * introduce new ostype 'solaris' (run without x2apic).
2817 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Sep 2013 06:55:33 +0200
2819 qemu-server (3.1-4) unstable; urgency=low
2821 * qemu migrate : only wait for spice server online + eval
2823 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Sep 2013 06:29:39 +0200
2825 qemu-server (3.1-3) unstable; urgency=low
2827 * speedup restore on glusterfs (do not write zero bytes)
2829 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Sep 2013 09:13:34 +0200
2831 qemu-server (3.1-2) unstable; urgency=low
2833 * Allow VMAdmin/DatastoreUser to delete disk
2835 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Sep 2013 07:48:07 +0200
2837 qemu-server (3.1-1) unstable; urgency=low
2839 * allow pass through of usb parallel devices (--parallel0 /dev/usb/lp0)
2841 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Aug 2013 12:20:23 +0200
2843 qemu-server (3.0-30) unstable; urgency=low
2845 * fix bugs in migration code (wrong qw() usage)
2847 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Aug 2013 09:49:20 +0200
2849 qemu-server (3.0-29) unstable; urgency=low
2851 * vncproxy: load config from correct node
2853 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Aug 2013 08:15:59 +0200
2855 qemu-server (3.0-28) unstable; urgency=low
2857 * allow to use a socket for serial devices
2859 * implement 'qm terminal' to open terminal via serial device
2861 * add ability to run without graphic card ('vga: serial[n]')
2863 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Aug 2013 10:05:35 +0200
2865 qemu-server (3.0-27) unstable; urgency=low
2867 * add support for unsecure/fast migration (setting in datacenter.cfg)
2869 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Jul 2013 11:24:36 +0200
2871 qemu-server (3.0-26) unstable; urgency=low
2873 * remove spice cert paths (depend on pve-qemu-kvm >= 1.4-16)
2875 * implement spice seamless migration
2877 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2013 10:08:33 +0200
2879 qemu-server (3.0-25) unstable; urgency=low
2881 * support usb redirection devices for spice (usb[n]: spice)
2883 * disable tablet device by default for spice
2885 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jul 2013 09:38:25 +0200
2887 qemu-server (3.0-24) unstable; urgency=low
2889 * spiceproxy API: allow client to choose proxy address
2891 * spiceproxy API: read cert subject name directly using Net::SSLeay
2893 * spice: use TLS (encrypt whole traffic)
2895 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Jul 2013 08:14:46 +0200
2897 qemu-server (3.0-23) unstable; urgency=low
2899 * allow to pass SCSI generic devices to guests, for example "scsi0: /dev/sg5"
2901 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jul 2013 06:49:45 +0200
2903 qemu-server (3.0-22) unstable; urgency=low
2905 * cpu flags optimization
2907 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Jul 2013 09:14:49 +0200
2909 qemu-server (3.0-21) unstable; urgency=low
2911 * add support for SPICE
2913 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Jun 2013 13:15:48 +0200
2915 qemu-server (3.0-20) unstable; urgency=low
2917 * new API to update VM config: this one is fully asynchronous.
2919 * snapshot rollback: use pc-i440fx-1.4 as default
2921 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Jun 2013 11:44:16 +0200
2923 qemu-server (3.0-19) unstable; urgency=low
2925 * config: implement new 'machine' configuration
2927 * migrate: pass --machine parameter to remote 'qm start' command
2929 * snapshot: store/use 'machine' confifiguration
2931 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Jun 2013 10:27:47 +0200
2933 qemu-server (3.0-18) unstable; urgency=low
2935 * imlement delete flag for move_disk
2937 * API: rename move to move_disk
2939 -- Proxmox Support Team <support@proxmox.com> Fri, 31 May 2013 10:57:50 +0200
2941 qemu-server (3.0-17) unstable; urgency=low
2943 * implement storage migration ("qm move")
2945 -- Proxmox Support Team <support@proxmox.com> Wed, 29 May 2013 13:01:16 +0200
2947 qemu-server (3.0-16) unstable; urgency=low
2949 * fix bug 395: correctly handle unused disk with storage alias
2951 * fix unused disk handling (do not hide unused disks when used with snapshot).
2953 -- Proxmox Support Team <support@proxmox.com> Tue, 28 May 2013 12:23:12 +0200
2955 qemu-server (3.0-15) unstable; urgency=low
2957 * qemu_img_format : use raw for as default for other storage
2959 -- Proxmox Support Team <support@proxmox.com> Thu, 23 May 2013 11:33:47 +0200
2961 qemu-server (3.0-14) unstable; urgency=low
2963 * fix bug #389: avoid error if balloon is undefined
2965 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2013 07:17:38 +0200
2967 qemu-server (3.0-13) unstable; urgency=low
2969 * fix bug #391 - restore: test if requested format is supported
2971 -- Proxmox Support Team <support@proxmox.com> Tue, 21 May 2013 12:03:56 +0200
2973 qemu-server (3.0-12) unstable; urgency=low
2975 * use add_vm_to_pool/remove_vm_from_pool from PVE::AccessControl
2977 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 12:02:41 +0200
2979 qemu-server (3.0-11) unstable; urgency=low
2981 * clone disk : keep source volume params
2983 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 10:18:21 +0200
2985 qemu-server (3.0-10) unstable; urgency=low
2987 * fix bug #381: use PVE::Tools::next_migrate_port()
2989 * clone: check is we can clone to target storage
2991 -- Proxmox Support Team <support@proxmox.com> Mon, 13 May 2013 07:31:47 +0200
2993 qemu-server (3.0-9) unstable; urgency=low
2995 * restore: do not restore template flag
2997 -- Proxmox Support Team <support@proxmox.com> Wed, 08 May 2013 10:23:49 +0200
2999 qemu-server (3.0-8) unstable; urgency=low
3001 * qemu_img_format: use 'raw' for lvm
3003 * drive-mirror : die if stats are empty
3005 * set long timeout for query-block-jobs
3007 -- Proxmox Support Team <support@proxmox.com> Tue, 07 May 2013 10:19:19 +0200
3009 qemu-server (3.0-7) unstable; urgency=low
3011 * has_feature: return list of allowed nodes
3013 -- Proxmox Support Team <support@proxmox.com> Mon, 06 May 2013 08:58:35 +0200
3015 qemu-server (3.0-6) unstable; urgency=low
3017 * fix bug #379 - restore: allow to overwrite existing VMs if user has
3018 VM.Backup permissions
3020 -- Proxmox Support Team <support@proxmox.com> Fri, 03 May 2013 07:53:40 +0200
3022 qemu-server (3.0-5) unstable; urgency=low
3024 * implement shared file locks
3026 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Apr 2013 11:35:01 +0200
3028 qemu-server (3.0-4) unstable; urgency=low
3030 * fix bug 377: make qm rescan work properly
3032 * avoid endless loop in QMPClient
3034 * use vm create permissions for templates
3036 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Apr 2013 07:59:28 +0200
3038 qemu-server (3.0-3) unstable; urgency=low
3040 * allow sparse restore for sheepdog and rbd
3042 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Apr 2013 06:21:40 +0200
3044 qemu-server (3.0-2) unstable; urgency=low
3046 * fix warnings in syslog
3048 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Mar 2013 06:25:12 +0100
3050 qemu-server (3.0-1) unstable; urgency=low
3052 * start 3.0 development
3054 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Mar 2013 11:39:08 +0100
3056 qemu-server (2.3-17) unstable; urgency=low
3058 * fix backup-cancel timeout
3060 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:58:58 +0100
3062 qemu-server (2.3-16) unstable; urgency=low
3064 * vncproxy (another try): wait max 10s for the socket if it does not
3067 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 06:42:36 +0100
3069 qemu-server (2.3-15) unstable; urgency=low
3071 * revert vncproxy change because it breaks console on remote hosts.
3073 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 12:53:59 +0100
3075 qemu-server (2.3-14) unstable; urgency=low
3077 * bugfix #340 : don't set cache=none to cdrom
3079 * Migrate: fix check if a backing file exist
3081 * vncproxy: wait max 10s for the socket if it does not exist
3083 * vzdump: improve error reporting
3085 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 06:21:30 +0100
3087 qemu-server (2.3-13) unstable; urgency=low
3089 * set cache=none by default
3091 -- Proxmox Support Team <support@proxmox.com> Mon, 25 Feb 2013 06:12:14 +0100
3093 qemu-server (2.3-12) unstable; urgency=low
3095 * disable hotplug by default (revert previous change)
3097 * disable usb2 controller by default (revert previous change)
3099 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Feb 2013 09:52:13 +0100
3101 qemu-server (2.3-11) unstable; urgency=low
3103 * fix backup parameters for pve-qemu-kvm 1.4-4
3105 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Feb 2013 10:47:55 +0100
3107 qemu-server (2.3-10) unstable; urgency=low
3109 * enable hotplug by default
3111 * enable usb2 controller by default
3113 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Feb 2013 10:45:28 +0100
3115 qemu-server (2.3-9) unstable; urgency=low
3117 * depend on pve-qemu-kvm >= 1.4-1
3119 * qemu 1.4 fix : rename stats-polling-interval to
3120 guest-stats-polling-interval
3122 * remove expected_downtime from migration status (not set in qemu 1.4,
3125 * do not set cache=none for .raw files - use qemu default instead
3128 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Feb 2013 10:38:13 +0100
3130 qemu-server (2.3-8) unstable; urgency=low
3132 * fix tar restore: correctly check if VM config already exists
3134 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Jan 2013 09:53:12 +0100
3136 qemu-server (2.3-7) unstable; urgency=low
3138 * allow to suspend/resume VM during backup
3140 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jan 2013 10:25:17 +0100
3142 qemu-server (2.3-6) unstable; urgency=low
3144 * fix bug #315: cancel backup before stopping the VM
3146 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jan 2013 13:22:58 +0100
3148 qemu-server (2.3-5) unstable; urgency=low
3150 * fix bug #307: correctly restore disk settings
3152 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Jan 2013 06:48:48 +0100
3154 qemu-server (2.3-4) unstable; urgency=low
3156 * qmrestore vma files: when restoring to same VMID, only remove volumes
3157 contained in backup - other volumes will be still available as
3158 'unused' disks. Note: tar restore still removes all volumes.
3160 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Jan 2013 07:02:00 +0100
3162 qemu-server (2.3-3) unstable; urgency=low
3164 * fix Bug #293: CDROM size not reset when set to use no media
3166 * set migrate_downtime default value to 0.1 (and use float instead of int)
3168 * implement dynamic migration_downtime
3170 * allow manual ballooning if shares is set to zero
3172 * new api2 call: vm_feature (test support for snapshots/clone feature)
3174 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Jan 2013 06:31:38 +0100
3176 qemu-server (2.3-2) unstable; urgency=low
3178 * use memory info from ballon driver (if enabled)
3180 -- Proxmox Support Team <support@proxmox.com> Tue, 18 Dec 2012 12:51:57 +0100
3182 qemu-server (2.3-1) unstable; urgency=low
3184 * include new qemu backup feature
3186 -- Proxmox Support Team <support@proxmox.com> Wed, 12 Dec 2012 15:14:59 +0100
3188 qemu-server (2.0-71) unstable; urgency=low
3190 * show better error message if bridge does not exist
3192 * QMPClient: support fdsets
3194 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Dec 2012 11:17:47 +0100
3196 qemu-server (2.0-70) unstable; urgency=low
3198 * fix version parser for qemu 1.3
3200 * add new cpu types: SandyBridge Haswell Opteron_G4 Opteron_G5
3202 * remove rhel specific cpu types: cpu64-rhel6 cpu64-rhel5
3204 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2012 07:45:19 +0100
3206 qemu-server (2.0-69) unstable; urgency=low
3208 * fix ballon monitor command (use bytes instead of MBs)
3210 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Nov 2012 06:13:46 +0100
3212 qemu-server (2.0-68) unstable; urgency=low
3214 * vzdump: store drive in correct order (sort) to avoid confusion
3216 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Nov 2012 06:25:33 +0100
3218 qemu-server (2.0-67) unstable; urgency=low
3220 * fix allocation size in qmrestore
3222 -- Proxmox Support Team <support@proxmox.com> Sat, 03 Nov 2012 07:54:06 +0100
3224 qemu-server (2.0-66) unstable; urgency=low
3226 * vzdump: restore sata drives correctly
3228 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Nov 2012 07:43:16 +0100
3230 qemu-server (2.0-65) unstable; urgency=low
3232 * remove hardcoded blowfish cipher
3234 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Oct 2012 13:58:27 +0100
3236 qemu-server (2.0-64) unstable; urgency=low
3238 * fix memory leak in QMP Client (many thanks to Stefan!)
3240 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Oct 2012 12:14:51 +0100
3242 qemu-server (2.0-63) unstable; urgency=low
3246 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Oct 2012 10:00:50 +0200
3248 qemu-server (2.0-62) unstable; urgency=low
3250 * vncproxy: wait until vnc port is ready
3252 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Oct 2012 08:58:52 +0200
3254 qemu-server (2.0-61) unstable; urgency=low
3256 * add 'win8' ostype (same defaults as win7 for now)
3258 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Oct 2012 09:35:27 +0200
3260 qemu-server (2.0-60) unstable; urgency=low
3262 * fix bug 258: use bridge mtu for tap interfaces
3264 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Oct 2012 12:26:42 +0200
3266 qemu-server (2.0-59) unstable; urgency=low
3268 * disable vzdump for VM containing snapshots
3270 -- Proxmox Support Team <support@proxmox.com> Thu, 27 Sep 2012 09:41:19 +0200
3272 qemu-server (2.0-58) unstable; urgency=low
3274 * fix bug 251: use new command line syntax
3276 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Sep 2012 12:43:17 +0200
3278 qemu-server (2.0-57) unstable; urgency=low
3280 * fix migrating VMs with snapshots
3282 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Sep 2012 08:12:37 +0200
3284 qemu-server (2.0-56) unstable; urgency=low
3286 * include shanpshot support
3288 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2012 15:59:40 +0200
3290 qemu-server (2.0-55) unstable; urgency=low
3292 * migrate: disable xbzrle (not stable)
3294 -- Proxmox Support Team <support@proxmox.com> Fri, 31 Aug 2012 11:04:35 +0200
3296 qemu-server (2.0-54) unstable; urgency=low
3298 * use mbps instead of bps
3300 * try to make migrate more stable
3302 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Aug 2012 12:16:39 +0200
3304 qemu-server (2.0-53) unstable; urgency=low
3306 * livemigrate : activate xbzrle cache
3308 * scsihw: add megasas controller
3310 * partly fix bug 247: retry qmp open
3312 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Aug 2012 13:45:18 +0200
3314 qemu-server (2.0-52) unstable; urgency=low
3316 * fix bug 217: stop VM after failed migrate
3318 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Aug 2012 10:33:57 +0200
3320 qemu-server (2.0-51) unstable; urgency=low
3322 * support up to 32 network devices
3324 * support up to 16 virtio devices
3326 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Aug 2012 10:06:39 +0200
3328 qemu-server (2.0-50) unstable; urgency=low
3330 * implement 'qm rescan' to update disk sizes and unused disk info
3332 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2012 09:22:29 +0200
3334 qemu-server (2.0-49) unstable; urgency=low
3336 * fix bug 242: re-add old monitor code
3338 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Aug 2012 10:33:37 +0200
3340 qemu-server (2.0-48) unstable; urgency=low
3342 * add size hint to drive options
3344 * new 'qm resize' command
3346 -- Proxmox Support Team <support@proxmox.com> Tue, 14 Aug 2012 06:55:39 +0200
3348 qemu-server (2.0-47) unstable; urgency=low
3350 * implement virtio-scsi-pci controller
3352 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Aug 2012 08:57:52 +0200
3354 qemu-server (2.0-46) unstable; urgency=low
3356 * bug fix: allow to set devices directly (-ide1 /dev/XYZ)
3358 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Jul 2012 11:59:14 +0200
3360 qemu-server (2.0-45) unstable; urgency=low
3362 * migrate: only scan available storages
3364 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 10:18:22 +0200
3366 qemu-server (2.0-44) unstable; urgency=low
3368 * migrate: only scan necessary storage for unused volumes
3370 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 06:59:23 +0200
3372 qemu-server (2.0-43) unstable; urgency=low
3374 * use new QMPClient code
3376 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Jul 2012 07:05:28 +0200
3378 qemu-server (2.0-42) unstable; urgency=low
3380 * fix pool permission checks on create
3382 -- Proxmox Support Team <support@proxmox.com> Wed, 30 May 2012 10:13:11 +0200
3384 qemu-server (2.0-41) unstable; urgency=low
3386 * more fixes for newer pve-storage versions
3388 -- Proxmox Support Team <support@proxmox.com> Thu, 24 May 2012 07:24:00 +0200
3390 qemu-server (2.0-40) unstable; urgency=low
3392 * minor fixes for newer pve-storage versions
3394 -- Proxmox Support Team <support@proxmox.com> Wed, 23 May 2012 07:23:31 +0200
3396 qemu-server (2.0-39) unstable; urgency=low
3398 * new startup option to define startup order.
3400 * do not start VMs with /etc/init.d/qemu-server. This is now
3401 done with /etc/init.d/pve-manager
3403 * qm: removed startall/stopall commands
3405 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Apr 2012 14:26:04 +0200
3407 qemu-server (2.0-38) unstable; urgency=low
3409 * add directsync cache mode
3411 * fix bug #147: allow to set migrate_downtime to 0
3413 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Apr 2012 08:51:56 +0200
3415 qemu-server (2.0-37) unstable; urgency=low
3417 * fix bug in storage availability check (migrate)
3419 -- Proxmox Support Team <support@proxmox.com> Sat, 07 Apr 2012 08:25:59 +0200
3421 qemu-server (2.0-36) unstable; urgency=low
3423 * use '-no-kvm-pit-reinjection -no-hpet' for win7 and w2k8 guests.
3425 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Apr 2012 12:34:00 +0200
3427 qemu-server (2.0-35) unstable; urgency=low
3429 * fix bug #134: allow to pass file names to qmrestore and 'qm set'
3431 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Apr 2012 10:51:41 +0200
3433 qemu-server (2.0-34) unstable; urgency=low
3435 * fix bug #12: check storage availability early (migrate)
3437 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Mar 2012 09:12:46 +0200
3439 qemu-server (2.0-33) unstable; urgency=low
3441 * fix bug #121: activate volumes correctly
3443 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 11:09:36 +0200
3445 qemu-server (2.0-32) unstable; urgency=low
3447 * fix usb host syntax (correctly pass hexadecimal numbers with prefix
3450 * document rerror/werror options
3452 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 07:11:51 +0200
3454 qemu-server (2.0-31) unstable; urgency=low
3456 * use new network setup code from PVE::Network (libpve-common-perl)
3458 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Mar 2012 10:39:12 +0200
3460 qemu-server (2.0-30) unstable; urgency=low
3464 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 12:20:33 +0200
3466 qemu-server (2.0-29) unstable; urgency=low
3468 * fix bug #97: execute 'clusvcadm' commands for HA managed VMs
3470 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 10:36:23 +0200
3472 qemu-server (2.0-28) unstable; urgency=low
3474 * use Digest::SHA instead of Digest::SHA1
3476 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 12:24:01 +0100
3478 qemu-server (2.0-27) unstable; urgency=low
3480 * make startall wait up to 10 seconds for quorum
3482 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 09:32:53 +0100
3484 qemu-server (2.0-26) unstable; urgency=low
3486 * fix bug 109: use scsi inquiry to test if we can use the scsi-block
3489 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Mar 2012 10:39:30 +0100
3491 qemu-server (2.0-25) unstable; urgency=low
3493 * fix bug 102: remove stale status file on stop
3495 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 12:53:32 +0100
3497 qemu-server (2.0-24) unstable; urgency=low
3499 * save description as comment.
3501 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 08:12:29 +0100
3503 qemu-server (2.0-23) unstable; urgency=low
3505 * fix lvremove call: avoid 'Not a CODE reference' warning
3507 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 06:36:33 +0100
3509 qemu-server (2.0-22) unstable; urgency=low
3511 * revert tablet mice fix - does not work reliable
3513 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 09:45:30 +0100
3515 qemu-server (2.0-21) unstable; urgency=low
3517 * fix tablet mice as default when live migrate
3519 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 06:51:09 +0100
3521 qemu-server (2.0-20) unstable; urgency=low
3523 * fix bug 96: fix vzdump on stopped vm
3525 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Feb 2012 07:38:45 +0100
3527 qemu-server (2.0-19) unstable; urgency=low
3529 * support more CPU models
3531 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Feb 2012 07:18:53 +0100
3533 qemu-server (2.0-18) unstable; urgency=low
3535 * fix cdrom (/dev/cdrom) permission check
3537 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Feb 2012 07:16:36 +0100
3539 qemu-server (2.0-17) unstable; urgency=low
3541 * fix cdrom removal bug
3543 -- Proxmox Support Team <support@proxmox.com> Wed, 15 Feb 2012 10:48:30 +0100
3545 qemu-server (2.0-16) unstable; urgency=low
3547 * ignore -tdf (avoid kvm warning) - this is no longer needed
3549 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Feb 2012 11:18:01 +0100
3551 qemu-server (2.0-15) unstable; urgency=low
3553 * online migration fix: close tunnel later, wait for connection close
3555 * fix bug #81: do no deactivate volumes in vzdump stop mode
3557 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jan 2012 11:24:56 +0100
3559 qemu-server (2.0-14) unstable; urgency=low
3561 * use 'da' instead of 'dk' for Danish keyboard (qemu use that name)
3563 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Jan 2012 11:24:40 +0100
3565 qemu-server (2.0-13) unstable; urgency=low
3567 * load vhost_net module
3569 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2011 12:25:22 +0100
3571 qemu-server (2.0-12) unstable; urgency=low
3573 * implement forceStop option for shutdown
3575 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2011 12:58:00 +0100
3577 qemu-server (2.0-11) unstable; urgency=low
3579 * do not use ehci by default
3581 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Dec 2011 10:26:36 +0100
3583 qemu-server (2.0-10) unstable; urgency=low
3585 * set qm exit codes currectly
3587 * fix 'qm shutdown <vmid>'
3589 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2011 09:35:43 +0100
3591 qemu-server (2.0-9) unstable; urgency=low
3595 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 11:14:01 +0100
3597 qemu-server (2.0-8) unstable; urgency=low
3599 * be more careful when removing snapshots
3601 * do not call check_lock() for sendkey
3603 * try to detect errors before starting the background task
3605 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 08:08:44 +0100
3607 qemu-server (2.0-7) unstable; urgency=low
3609 * activate/deactivate LVs more carefully
3611 * avoid syslog whenever possible
3615 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Nov 2011 08:08:04 +0100
3617 qemu-server (2.0-6) unstable; urgency=low
3619 * set correct migrate speed
3621 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2011 09:12:12 +0100
3623 qemu-server (2.0-5) unstable; urgency=low
3625 * fix vzdump stop mode
3627 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Nov 2011 06:38:03 +0100
3629 qemu-server (2.0-4) unstable; urgency=low
3633 -- Proxmox Support Team <support@proxmox.com> Sat, 19 Nov 2011 09:54:19 +0100
3635 qemu-server (2.0-3) unstable; urgency=low
3637 * implement monitor API
3639 * implement qmrestore
3641 * fix vzdump plugin for 2.0
3643 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Nov 2011 11:35:58 +0100
3645 qemu-server (2.0-2) unstable; urgency=low
3649 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2011 10:15:37 +0200
3651 qemu-server (2.0-1) unstable; urgency=low
3653 * see Changelog for details
3655 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Aug 2010 13:48:12 +0200
3657 qemu-server (1.1-18) unstable; urgency=low
3659 * small bug fix im qmigrate
3661 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Aug 2010 08:05:21 +0200
3663 qemu-server (1.1-17) unstable; urgency=low
3665 * carefully catch write errors
3667 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Jul 2010 09:00:48 +0200
3669 qemu-server (1.1-16) unstable; urgency=low
3671 * add rerror/werror options (patch from l.mierzwa)
3673 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jun 2010 08:49:00 +0200
3675 qemu-server (1.1-15) unstable; urgency=low
3677 * fix vmtar bug (endless growing archive)
3679 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Jun 2010 12:22:17 +0200
3681 qemu-server (1.1-14) unstable; urgency=low
3683 * correct order of config option (prevent virtio reordering)
3685 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Apr 2010 09:05:15 +0200
3687 qemu-server (1.1-13) unstable; urgency=low
3689 * allow vlan1-to vlan4094 (Since 802.1q allows VLAN identifiers up to 4094).
3691 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Apr 2010 10:19:37 +0200
3693 qemu-server (1.1-12) unstable; urgency=low
3695 * minor fixes for new qemu-kvm 0.12.3
3697 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Apr 2010 12:01:17 +0200
3699 qemu-server (1.1-11) unstable; urgency=low
3701 * experimental support for pci pass-through (option 'hostpci')
3703 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Jan 2010 13:03:44 +0100
3705 qemu-server (1.1-10) unstable; urgency=low
3707 * add compatibility code for older kvm versions (0.9)
3709 * only use fairsched when the kernel has openvz support
3711 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 15:17:18 +0100
3713 qemu-server (1.1-9) unstable; urgency=low
3715 * always display boot menu (Press F12...)
3717 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2009 10:28:23 +0100
3719 qemu-server (1.1-8) unstable; urgency=low
3721 * fix 'stopall' timeout
3723 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Oct 2009 12:55:23 +0200
3725 qemu-server (1.1-7) unstable; urgency=low
3727 * do not set fairsched --id when using virtio
3729 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2009 11:57:57 +0200
3731 qemu-server (1.1-6) unstable; urgency=low
3733 * disable fairsched when option 'cpuunits' is set to 0 (zero)
3735 * disable fairsched when the VM uses virtio devices.
3737 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2009 15:06:48 +0200
3739 qemu-server (1.1-5) unstable; urgency=low
3741 * suppress syslog when setting migrate downtime/speed
3743 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2009 10:10:55 +0200
3745 qemu-server (1.1-4) unstable; urgency=low
3747 * depend on stable pve-qemu-kvm
3749 * new migrate_speed and migrate_downtime settings
3751 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Sep 2009 11:18:08 +0200
3753 qemu-server (1.1-3) unstable; urgency=low
3755 * support up to 1000 vlans
3757 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:35 +0200
3759 qemu-server (1.1-2) unstable; urgency=low
3761 * introduce new 'sockets' and 'cores' settings
3763 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:18 +0200
3765 qemu-server (1.1-1) unstable; urgency=low
3767 * use new pve-storage framework
3769 * delete unused disk on destroy
3771 * fix cache= option (none|writethrough|writeback)
3773 * use rtc-td-hack for windows when acpi is enabled
3775 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jun 2009 08:49:53 +0200
3777 qemu-server (1.0-14) unstable; urgency=low
3779 * add new tablet option (to disable --usbdevice tablet, which generate
3780 many interrupts, which is bad when you run many VMs) (Patch was
3781 provided by Tomasz Chmielewski)
3783 -- Proxmox Support Team <support@proxmox.com> Wed, 27 May 2009 12:50:45 +0200
3785 qemu-server (1.0-13) unstable; urgency=low
3787 * Conflict with netcat-openbsd
3789 -- Proxmox Support Team <support@proxmox.com> Wed, 13 May 2009 10:20:54 +0200
3791 qemu-server (1.0-12) unstable; urgency=low
3793 * fixes for debian lenny
3795 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Apr 2009 14:28:42 +0200
3797 qemu-server (1.0-11) unstable; urgency=low
3799 * allow white spaces inside args - use normal shell quoting
3801 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Feb 2009 11:31:36 +0100
3803 qemu-server (1.0-10) unstable; urgency=low
3807 * bug fix for 'lost description'
3809 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2009 08:18:29 +0100
3811 qemu-server (1.0-9) unstable; urgency=low
3813 * add 'parallel' option
3815 * add 'startdate' option
3819 -- Proxmox Support Team <support@proxmox.com> Mon, 2 Feb 2009 08:53:26 +0100
3821 qemu-server (1.0-8) unstable; urgency=low
3823 * add 'serial' option
3825 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jan 2009 08:52:24 +0100
3827 qemu-server (1.0-7) unstable; urgency=low
3829 * use new systax for kvm vga option (needed for kvm newer than kvm77)
3831 -- Proxmox Support Team <support@proxmox.com> Wed, 7 Jan 2009 14:46:09 +0100
3833 qemu-server (1.0-6) unstable; urgency=low
3835 * use predefined names for tap devices
3837 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Dec 2008 13:00:44 +0100
3839 qemu-server (1.0-5) unstable; urgency=low
3841 * added host usb device support
3843 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Nov 2008 11:26:04 +0100
3845 qemu-server (1.0-4) unstable; urgency=low
3847 * fix status problem
3849 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Nov 2008 13:13:43 +0100
3851 qemu-server (1.0-3) unstable; urgency=low
3855 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Nov 2008 08:29:23 +0100
3857 qemu-server (1.0-1) unstable; urgency=low
3859 * update for kvm-75, support vm migration
3861 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Oct 2008 11:04:03 +0200
3863 qemu-server (0.9) unstable; urgency=low
3867 -- Proxmox Support Team <support@proxmox.com> Mon, 4 Feb 2008 09:10:13 +0100