1 qemu-server (7.0-9) bullseye; urgency=medium
3 * cpu weight: always clamp value to lower maximum for cgroup v2 and fix
4 defaults (v1 -> 1024, v2 -> 100)
6 * api: improve error handling when applying pending config changes
8 -- Proxmox Support Team <support@proxmox.com> Wed, 07 Jul 2021 12:02:13 +0200
10 qemu-server (7.0-7) bullseye; urgency=medium
12 * improve #3329: ensure write-back is used over write-around for EFI disk,
13 as OVMF profits a lot from cached writes due to its frequent
14 read-modify-write operations
16 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Jul 2021 20:49:50 +0200
18 qemu-server (7.0-6) bullseye; urgency=medium
20 * live-restore: preload efidisk before starting VM
22 * For now do not use io_uring for drives backed by Ceph RBD, with KRBD and
23 write-back or write-through cache enabled, as in that case some polling/IO
26 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Jul 2021 09:45:06 +0200
28 qemu-server (7.0-5) bullseye; urgency=medium
30 * don't default to O_DIRECT (cache=none) on btrfs without nocow
32 * fix #2175: api: update VM: check old drive-config for permissions too to
33 ensure a valid transition when limited to CDROM changes.
35 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 18:58:19 +0200
37 qemu-server (7.0-4) bullseye; urgency=medium
39 * enable io-uring support by default when running QEMU 6.0 or newer
41 * VM start: always check if storages of volumes support correct content-type
43 * use KillMode 'process' for systemd scope to cope with depreacation of
46 * cli, api: handle new warnings task status
48 * improve backup of templates with EFI disks and with SATA and IDE
49 disk controllers in use
51 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 12:57:27 +0200
53 qemu-server (7.0-3) bullseye; urgency=medium
55 * vzdump: add master key support
57 * vzdump: drop legacy fallback logging for dirty-bitmap
59 * vm destroy: do not remove unreferenced disks by default
61 * fix #3329: turn on cache=writeback for efidisks on rbd
63 * avoid setting LUN number for drives when the `pvscsi` controller is used,
64 as that cannot handle multiple LUNs, increase the `scsi-id` instead
66 * config: limit description/comment length to 8 KiB
68 * migrate: enforce that image content type is available and configured on
71 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jun 2021 11:17:52 +0200
73 qemu-server (7.0-2) bullseye; urgency=medium
75 * api: clone: sort vm disks to keep numbers consistent
77 * api: VM status: make template property optional in return object
79 * add compatibility for QEMU 6.0
81 * destroy VM: always remove (referenced) VM state volumes
83 * destroy VM: also check if unused volumes are base images
85 * live-restore: log more similar to regular restore, outputting the user the
86 PBS repo/snapshot and target for each drive.
88 -- Proxmox Support Team <support@proxmox.com> Fri, 28 May 2021 12:46:36 +0200
90 qemu-server (7.0-1) pve; urgency=medium
92 * re-build for Proxmox VE 7 / Debian Bullseye
94 -- Proxmox Support Team <support@proxmox.com> Thu, 13 May 2021 19:11:18 +0200
96 qemu-server (6.4-2) pve; urgency=medium
98 * fix #2862: allow sata/ide template backups
100 * migration: improve speed-limits for >1G connections again
102 * fix getting bootdisk size for new bootorder config scheme
104 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Apr 2021 16:16:04 +0200
106 qemu-server (6.4-1) pve; urgency=medium
108 * fix the +pveN versioned machine types when PXE is used
110 * migration: avoid re-scanning all volumes
112 * migration: do not always set default speed limit if none is configured
114 * migration: rework logging to more humand friendly format, avoiding to much
117 * qmrestore: add live-restore option for CLI tool
119 * live-restore: hold 'create' lock during operation
121 * live-restore: don't remove VM on error, to allow an VM user to save any new
122 data before retrying the operation.
124 * fix #3369: auto-start vm after failed stopmode backup
126 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Apr 2021 16:26:54 +0200
128 qemu-server (6.3-11) pve; urgency=medium
130 * enable live-restore tech preview for Proxmox Backup Server hosted backup
133 * drive mirror: rework periodic status reporting to be human friendlier
135 * drive mirror: stop logging progress for a disk once it got ready
137 * image convert: use human-readable units in progress report
139 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Apr 2021 18:32:06 +0200
141 qemu-server (6.3-10) pve; urgency=medium
143 * increase timeout for block (disk) resize QMP command
145 * fix #3314: cloudinit: IPv6 requires type 'static6'
147 * fix #2670: cloudinit: enable SLAAC again now that client support is there
149 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Mar 2021 18:40:58 +0200
151 qemu-server (6.3-9) pve; urgency=medium
153 * restore vma: fix applying storage-specific bandwidth limit
155 * snapshot: set migration caps before savevm-start
157 * vzdump: improve error logging for query-proxmox-support to avoid
160 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 09:47:27 +0100
162 qemu-server (6.3-8) pve; urgency=medium
164 * qm status: sort hash keys on verbose output
166 * improve windows VM version pinning on VM creation
168 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Mar 2021 10:01:09 +0100
170 qemu-server (6.3-7) pve; urgency=medium
172 * vzdump: increase Proxmox Backup Server backup QMP command timeout
174 -- Proxmox Support Team <support@proxmox.com> Tue, 09 Mar 2021 08:21:43 +0100
176 qemu-server (6.3-6) pve; urgency=medium
178 * fix #3324: clone disk: use larger blocksize for EFI disk
180 * fix #3301: status: add currently running machine and QEMU version to full
183 * api: add endpoint to list all available QEMU machine type and version
186 * always pin virtual machines with Windows as ostype to a fixed QEMU machine
187 version by default. For existing VMs with Windows based OS-type use the 5.1
188 machine version (or the next available one, for older QEMU versions) to
189 improve stabillity of the hardware layout from Windows point of view. Linux
190 and other OS types are not as sensitive to those changes, so keep the
191 default to the currently latest available machine versions for non-Windows
194 * update VM: check for CDROM not just drive permissions when removing a
197 -- Proxmox Support Team <support@proxmox.com> Fri, 05 Mar 2021 21:42:59 +0100
199 qemu-server (6.3-5) pve; urgency=medium
201 * cloudinit: add opennebula config format
203 * cloudinit: remove pending delete on online regenerate image
205 * snapshot/save-vm: periodically print progress and show information about
206 drives during snapshot
208 * qmeventd: explicitly close() pidfds
210 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Feb 2021 18:05:18 +0100
212 qemu-server (6.3-4) pve; urgency=medium
214 * audio: add the "none" dummy audio backend
216 * fix drive-mirror completion with cloudinit
218 * vm destroy: allow opt-out of purging unreferenced disks
220 * fix #2788: do not resume vms after backup if they were paused before
222 * anchor CPU flag regex to avoid arbitrary flag suffixes
224 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Jan 2021 17:21:07 +0100
226 qemu-server (6.3-3) pve; urgency=medium
228 * api: adapt VM destroy and purge description
230 * clone disk: fix regression in offline clone of efidisk
232 * cloudinit: fix cloning/restoring of cloudinit disks in raw format
234 -- Proxmox Support Team <support@proxmox.com> Tue, 15 Dec 2020 16:33:01 +0100
236 qemu-server (6.3-2) pve; urgency=medium
238 * PBS: use improved method to assemble repository url, fixing issues when
239 using IPv6 or non-default ports
241 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Dec 2020 18:06:25 +0100
243 qemu-server (6.3-1) pve; urgency=medium
245 * deactivate volumes after storage migrate
247 * print query-proxmox-support result in 'full' status
249 * clone disk: avoid errors after disk was moved by QEMU
251 * replace cgroups_write by cgroup change_cpu_shares && change_cpu_quota
253 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Nov 2020 14:30:50 +0100
255 qemu-server (6.2-20) pve; urgency=medium
257 * don't migrate replicated VM whose replication job is marked for
260 * ensure qmeventd service is stopped after pve-guests and pve-ha-lrm service
263 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Nov 2020 17:08:45 +0100
265 qemu-server (6.2-19) pve; urgency=medium
267 * fix #3113: unbreak drive hotplug
269 * qmeventd: add handling for -no-shutdown QEMU instances, to avoid errors if
270 the guest OS shuts down the VM during a backup job.
272 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Nov 2020 13:37:00 +0100
274 qemu-server (6.2-18) pve; urgency=medium
276 * migrate: tell QEMU to enable dirty-bitmap migration, if supported
278 * partially fix #3056: always try to cancel backups when failed to start job
280 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Oct 2020 18:23:13 +0100
282 qemu-server (6.2-17) pve; urgency=medium
284 * bootorder: don't print empty 'order=' property
286 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2020 16:08:57 +0200
288 qemu-server (6.2-16) pve; urgency=medium
290 * fix #3010: add 'bootorder' parameter for better control of boot devices
292 * fix VM clone from snapshot with cloudinit disk
294 * fix various possible issues by avoiding conditionally declared variables
297 * PCI passthrough: fix setting VGA to 'none' when marking passed-through
298 device as 'Primary GPU'
300 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Oct 2020 15:51:48 +0200
302 qemu-server (6.2-15) pve; urgency=medium
304 * fix #2570: add 'keephugepages' config property
306 * vzdump: log 'finishing' state for Proxmox Backup Server jobs, to avoid
307 suggesting that the backup is stuck at 100%. This can happen when the
308 validation and mark of pre-existing chunks needs a bit longer.
310 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2020 17:44:28 +0200
312 qemu-server (6.2-14) pve; urgency=medium
314 * vzdump: allow bandwidth limit also PBS backup
316 * avoid a warning when checking the VMs bios
318 * fix #2862: properly backup (all) VM templates
320 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Aug 2020 19:33:54 +0200
322 qemu-server (6.2-13) pve; urgency=medium
324 * fix use of bandwidth limits with offline storage migrate
326 * allow one to add CPU features with a dot, like "+sse4.2", correctly
328 * vzdump: improve logging output and report dirty bitmap state for each disk
330 * vzdump: display actually uploaded chunks as 'write' speed to conform more
331 closely with the actual network transmission line-speed.
333 * fix #2749: vga: disable the display EDID information for the combination of
334 Windows SeaBIOS and VGA guests to avoid a reduced list of possible screen
335 resolutions. (Windows may cache the list of possible resolutions,
336 uninstalling 'Microsoft Basic Display Adapter' and rebooting may then help)
338 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2020 11:42:47 +0200
340 qemu-server (6.2-11) pve; urgency=medium
342 * fix #2857: restore: pass keyfile to pbs-restore
344 * fix #2728: die/warn if target is not a replication target when
347 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Jul 2020 08:13:29 +0200
349 qemu-server (6.2-10) pve; urgency=medium
351 * pass-through: fix mdev cmdline generation
353 * docs: add man page cpu-models.conf(5)
355 * start: set resume parameter for VM start anytime there is a 'vmstate' in
356 the config, not just when it has the 'suspend' lock
358 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Jul 2020 13:37:37 +0200
360 qemu-server (6.2-9) pve; urgency=medium
362 * support encrypted pbs backups
364 -- Proxmox Support Team <support@proxmox.com> Fri, 10 Jul 2020 14:23:46 +0200
366 qemu-server (6.2-8) pve; urgency=medium
368 * backup: detect PBS features and use only supported
370 * fix #2671: include CPU format in man page again
372 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jul 2020 15:14:36 +0200
374 qemu-server (6.2-6) pve; urgency=medium
376 * vzdump: fix variable redeclaration warning
378 * make backup log more friendlier to read for humans
380 -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 19:00:09 +0200
382 qemu-server (6.2-4) pve; urgency=medium
384 * fix #2787: properly parse vga for vncproxy
386 * vncproxy: allow to request a generated VNC password
388 * fix #2794: allow legacy IGD passthrough
390 * avoid backup command timeout with PBS
392 * fix #2741: add VM.Config.Cloudinit permission
394 * enable dirty-bitmap incremental backups for PBS
396 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Jun 2020 11:33:35 +0200
398 qemu-server (6.2-3) pve; urgency=medium
400 * fix #2748: make order of cloudinit interfaces consistent
402 * fix #2774: add early check for non-managed volumes
404 * allow to force MTU for a VM net-device
406 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jun 2020 11:17:09 +0200
408 qemu-server (6.2-2) pve; urgency=medium
410 * adapt net-device hotplug to more strict QMP schema of QEMU 5.0
412 -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2020 13:00:18 +0200
414 qemu-server (6.2-1) pve; urgency=medium
416 * qmrestore: fix VMA restore from STDIN
418 -- Proxmox Support Team <support@proxmox.com> Thu, 07 May 2020 21:51:01 +0200
420 qemu-server (6.1-20) pve; urgency=medium
422 * cfg2cmd: fix uninitialized value warning on OVMF w/o efidisk
424 * vzdump: fix backup of templates with stdout as output
426 * cfg2cmd: set audiodev parameter only on qemu >= 4.2
428 * api: allow listing custom and default CPU models
430 -- Proxmox Support Team <support@proxmox.com> Wed, 06 May 2020 17:16:56 +0200
432 qemu-server (6.1-19) pve; urgency=medium
434 * clone: use new config_lock_shared
436 -- Proxmox Support Team <support@proxmox.com> Tue, 5 May 2020 11:22:04 +0200
438 qemu-server (6.1-18) pve; urgency=medium
440 * vzdump: assemble: fix skipping all pending and snapshot config entries
442 * api/destroy: repeat early checks after locking
444 * migrate: skip rescan for efidisk and shared volumes
446 -- Proxmox Support Team <support@proxmox.com> Mon, 04 May 2020 17:36:40 +0200
448 qemu-server (6.1-17) pve; urgency=medium
450 * backup: never try to freeze in stop mode backup
452 * Fix #2124: Add support for zstd
454 -- Proxmox Support Team <support@proxmox.com> Mon, 4 May 2020 14:11:50 +0200
456 qemu-server (6.1-16) pve; urgency=medium
458 * spice audio: improve compatibility with QEMU versions newer than 4.2
460 * migrate: workaround issues with format switch on storage live migration
462 * fix live migration with replicated unused volumes
464 * importovf: improve compatibility with OVF files without default namespaces
466 * backup restore: use correct storage for format check for cloudinit drives
468 * handle stopping the storage migration NBD server better
470 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Apr 2020 16:23:24 +0200
472 qemu-server (6.1-14) pve; urgency=medium
474 * Use foreach_volume instead of foreach_drive
476 * Use new storage_migrate interface
478 * migrate: update config with changed volume IDs
480 * migrate: allow specifying targetstorage for offline migration
482 * migrate: sync_disks: use allow_rename to avoid collisions on the target
485 * migrate: sync_disks: log output of storage_migrate
487 * migrate: also cleanup disks migrated by storage_migrate in case of failure
489 -- Proxmox Support Team <support@proxmox.com> Thu, 9 Apr 2020 08:56:44 +0200
491 qemu-server (6.1-13) pve; urgency=medium
493 * rescan: fix call to foreach_volume
495 * migration: fix downtime limit auto-increase
497 * migrate: allow arbitrary source->target storage maps
499 * migrate: always check storage permissions and content type
501 * Include full KVM/QEMU "-cpu" parameter with live-migration and
502 snapshots/suspend to allow supporting custom CPU models
504 * fix #2318: allow phys-bits CPU setting
506 * allow custom CPU models
508 * config: harmonize bridge pattern to match the same limits of containers
510 * cpu config: add upcoming EPYC-Rome CPU type
512 -- Proxmox Support Team <support@proxmox.com> Wed, 08 Apr 2020 17:08:13 +0200
514 qemu-server (6.1-12) pve; urgency=medium
516 * CPUConfig: fix module load when pmxcfs is unavailable
518 * migrate: fix replication false-positives
520 * migrate: cleanup disk/bitmaps if 'qm start' failed
522 * migration with targetstorage: check if target storage supports images
524 * fix efidisks on storages with minimum sizes bigger than OVMF_VARS.fd
526 * Implement volume-related helpers and use new foreach_volume
528 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Mar 2020 10:00:13 +0200
530 qemu-server (6.1-11) pve; urgency=medium
532 * vzdump: fix regression in backups for specific storage
534 * custom CPU models: add initial parser and verifier
536 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Mar 2020 09:00:24 +0100
538 qemu-server (6.1-10) pve; urgency=medium
540 * version_guard: early out when major/minor version is high enough
542 * drive-mirror: add support for incremental sync
544 * migrate: add replication info to disk overview
546 * migrate: add live-migration of replicated disks
548 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Mar 2020 15:16:21 +0100
550 qemu-server (6.1-8) pve; urgency=medium
552 * cloudinit: make genisoimage quieter, only output errors
554 * Append newline to all QGA commands for compatibility with non standard
555 conforming Apple based guest agent implementation
557 * add experimental support for proxmox backup server
559 * fix #2580: api/delete: drop VM from HA resources if purge is set
561 * improve drive mirror completion over NBD during migration
563 * add secured unix socket support for NBD storage migration
565 * Disable memory hotplug for custom NUMA topologies and die on misaligned
568 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Mar 2020 11:11:31 +0100
570 qemu-server (6.1-7) pve; urgency=medium
572 * vzdump: always exclude efidisks from backups of machines currently not set
575 * Simplify QEMU version check and require at least 3.0+
577 * Align size to 1 KiB bytes before doing 'qmp block_resize'
579 * fix #2611: use correct operation when calculating the migration bandwidth
582 * fix #2612: allow input-data in guest exec and make command optional
584 * cpu models: add icelake-server and icelake-client
586 * already add models from future QEMU 4.2 release
588 * fix #2264: allow one to add a virtio-rng device for improved entropy
591 * update_disksize: also update disk size if there was no old size at all
593 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2020 19:12:16 +0100
595 qemu-server (6.1-6) pve; urgency=medium
597 * allow reading snapshot config for users with VM.Audit on a guest
599 * fix #2566: increase scsi limit to 31
601 * fix #2578: check if $target is provided in clone
603 * update QMP commands to reflect (future) depreacations and changes in QEMU
605 * resize volume: always request new size from storage after resizing
607 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2020 06:40:43 +0100
609 qemu-server (6.1-5) pve; urgency=medium
611 * Add QEMU CPU flag querying helpers
613 * hotplug_pending: remove redundant write/load config calls
615 * api: vm clone: unlink zombie target VM and firewall config at end of error
618 * add timeout parameter to vm start API/CLI endpoint
620 * fix #2070: vm_start: for a migrating VM, use current format of disk if
623 * hotplug_pending: make 'ssd' option non-hotpluggable, it cannot be changed
624 live on a plugged disk.
626 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jan 2020 10:27:33 +0100
628 qemu-server (6.1-4) pve; urgency=medium
630 * check if QEMU version is recent enough for requested machine type
632 * suspend to disk: check and enforce more strict permissions
634 * update disk size before local disk migration
636 * hide very long commandline on vm_start/migrate failure
638 * fix #2493: show QEMU errors in migration log
640 * api/restore: do not trigger autostart-after-restored task from locked
643 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Dec 2019 16:03:25 +0100
645 qemu-server (6.1-3) pve; urgency=medium
647 * create efidisk: poll the real size after volume creation, as some storages
648 need to create bigger volumes as requested, to cope with their internal
649 alignment requirements.
651 * fix #2469: fix qemu-img convert src_format detection, wrongly reverted.
653 * fix #2510: hostpci: always check if specified device exists
655 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Dec 2019 11:44:14 +0100
657 qemu-server (6.1-2) pve; urgency=medium
659 * api: allow one to remove (hibernation) vmstate
661 * vzdump: log QGA FS freeze/thaw tries in task log
663 * skip efidisk0 in hotplug
665 -- Proxmox Support Team <support@proxmox.com> Sat, 30 Nov 2019 18:38:36 +0100
667 qemu-server (6.1-1) pve; urgency=medium
669 * fix #2367: do not allow snapshot with name PENDING
671 * fix #2469: fix qemu-img convert src_format detection
673 * implement PVE Version addition for QEMU machine allowing to introduce new
674 features while keeping migration compatibility more easily
676 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 13:06:21 +0100
678 qemu-server (6.0-17) pve; urgency=medium
680 * PCI(e) pass-through: ensure we fallback to the previous default "0000"
683 -- Proxmox Support Team <support@proxmox.com> Sat, 23 Nov 2019 09:52:09 +0100
685 qemu-server (6.0-16) pve; urgency=medium
687 * fix #2473: use of unitialized value
689 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Nov 2019 14:18:58 +0100
691 qemu-server (6.0-15) pve; urgency=medium
693 * api/migration: fix autocomplete for targetstorage
695 * add 'type' to guest agent format, allowing one to choose between VirtIO
698 * clone: pre-allocate cloud-init disk for destination
700 * SPICE/QXL: tell Linux VMs that they can add up to 4 display when running
701 with qemu 4.1 or newer
703 * add support to tell showcmd helper to assume a specific forced machine
704 version when assembling a command
706 * refactor QemuServer to avoid cyclic module dependencies
708 * fix #2436: pci: do not hardcode pci domain to 0000
710 * add 'tags' config option for adding meta information to a VM
712 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 19:41:01 +0100
714 qemu-server (6.0-14) pve; urgency=medium
716 * use PVE::DataCenterConfig, use PVE::SSHInfo, use PVE::RRD for RRD data
718 * refactor migration IP retrieval
720 * add missing packages to (build-)dependencies
722 * fix #2457: ga: set-user-password: increase maxLength of password
724 * fix restoring old VM backups made with Promxox VE earlier than 2.3
726 * improve test mocking
728 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Nov 2019 12:12:03 +0100
730 qemu-server (6.0-13) pve; urgency=medium
732 * fix #2434: extend machine regex to support stable release machine updates
734 * prepare to fix #2408, #2355, #2380: use scsi-hd backend for iSCSI as well
736 * fix deleting pending changes for not yet existing options
738 * improve hugepage memory size detection
740 * avoid a race for VMID reservation when importing an OVF manifest to a new
743 * cleanup importidsk CLI command, and say to which exact disk we imported
745 * add simple runtime heuristic for IOThread backup support, to ensure the VM
746 to backup was started with a recent QEMU version.
748 * QMPClient: ensure QMP connection is also closed in certain edge cases
750 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Oct 2019 17:43:41 +0100
752 qemu-server (6.0-12) pve; urgency=medium
754 * fix regression from 6.0-10 with vmstate restore on RBD
756 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 16:31:46 +0200
758 qemu-server (6.0-11) pve; urgency=medium
760 * fix #1071: VMs with IOThread enabled disks can now be backed up
762 * fix regression from 6.0-10 with snapshot restore and statefile
764 * fix regression with from 6.0-10 where forced was always assumed to be true
765 for applying pending changes
767 -- Proxmox Support Team <support@proxmox.com> Tue, 22 Oct 2019 12:50:18 +0200
769 qemu-server (6.0-10) pve; urgency=medium
771 * fix #2344: ignore cloudinit in replication check
773 * fix #1291: add option purge for vm_destroy api call
775 * increase code re-use with pve-container for pending changes in
778 * fix #2412: only do the final configuration destroy after all the VMs
779 resources, and references in other configurations like Firewall or resource
780 pools was successfully cleaned up
782 * fix #2171: ensure that non filesystem based statefiles get activated on VM
785 * fix #2395: improve QEMU image converter to cope better with pure file based
786 sources and iSCSI source and destinations
788 * fix #2402: allow 1GB hugepages if 2MB is unavailable
790 * qemu 4.0 : add Cascadelake-Server and KnightsMill Intel CPU models
792 * fix #2217: don't copy cloudinit disk on clone
794 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Oct 2019 22:04:50 +0200
796 qemu-server (6.0-9) pve; urgency=medium
798 * fix issue where a SPICE remote viewer was disconnected during live migration
800 * Add VM reboot API/CLI integration, allowing to reboot a VM and applying any
801 pending changes in-between
803 * CPU flags: allow one to add aes flag
805 * fix #2263: die on live migration with local cloudinit disk
807 * fix #2041, #2272: Add Spice enhancements
809 * Add support for more (up to 16) PCI(e) devices
811 * usb: Allow one to make SPICE USB ports USB3 capabile
813 * allow one to use USB3 for SPICE USB ports with VMs started already with
814 QEMU version 4.0.0, as live-migrations were not possible with this previous
815 unsupported setup anyway. Live-snapshots from VMs with a SPICE USB device
816 which was manually set (wasn't possible over Webinterface) to USB3 with a
817 machine version of 4.0.0, need to remove the "usb3" flag again from the
818 snapshot config when restoring it.
820 * rework kvm_user_version cache mechanism
822 * api: deletion: check also pending values for serial/usb
824 * migration api: explicitly clear "online" flag if VM is stopped to avoid
825 issues with storage migrations which are handled different for stopped VMs
827 * abort resize disk if current size could not be determined
829 * fix #2382: delete cloudinit disk before restoring
831 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Sep 2019 12:01:58 +0200
833 qemu-server (6.0-7) pve; urgency=medium
835 * ensure new SPICE audio device works also with 'q35' based VMs
837 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Jul 2019 15:13:35 +0200
839 qemu-server (6.0-6) pve; urgency=medium
841 * Add SPICE audio device support
843 * fix #2275: die on invalid sendkey
845 * Make sometimes problematic 'hv-tlbflush' and 'hv-evmcs' CPU flags optional
847 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2019 18:20:10 +0200
849 qemu-server (6.0-5) pve; urgency=medium
851 * do not pass Proxmox VE internal startdate 'now' to QEMU, it does not
854 * use new pcie port hardware for 4.0 and newer q35 machine types
856 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:44:28 +0200
858 qemu-server (6.0-4) pve; urgency=medium
860 * fix guest shutdown if agent is configured but no timeout was passed
862 * cloudinit: set iso-level in genisoimage call
864 * migrate pre-condition check: add size to volume attributes and handle
865 storage not selected manually in storage config
867 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 20:35:09 +0200
869 qemu-server (6.0-3) pve; urgency=medium
871 * do not add evmcs HyperV enlightment at all for now due to incompatibillity
874 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 14:33:01 +0200
876 qemu-server (6.0-2) pve; urgency=medium
878 * add migration precondition api endpoint
880 * wait for possible left over VM scopes to be gone through dbus based helper
883 * fix #2244: Allow timeout for guest-agent shutdown
885 * fix #2083: Add hv_tlbflush, hv_ipi, hv_evmcs enlightenments
887 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Jun 2019 17:46:51 +0200
889 qemu-server (6.0-1) pve; urgency=medium
891 * SMBIOS: followup: allow now 512 characters for full format string
893 * fix #2190: Base64 encode SMBIOS value strings in order to allow more
896 * allow one to add md-clear cpu flag
898 * add qm command for cloudinit config dump
900 * drop vnc x509 param, deprecated in 2.5 removed in 4.0
902 * Fix #1999: cli: listsnapshot: handle multiple roots and mark orphaned as
905 * drop references to un-maintained sheepdog plugin
907 * vm_resume: correctly honor $nocheck
909 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Jun 2019 20:59:07 +0200
911 qemu-server (6.0-0+1) pve; urgency=medium
913 * rebuild for Debian Buster / PVE 6.0
915 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 19:12:34 +0200
917 qemu-server (5.0-51) unstable; urgency=medium
919 * fix #1811: allow non root user to edit serialX: socket entries
921 * allow non root users to add spice usb port
923 * fix #1829: do not ignore format parameter when creating cloudinit
926 * fix: #1075: Restore VM template to VM and try to convert to template
928 * fix #2173: use qemu-img to check cloudinit disk existence
930 * cloudinit: use detected format in volume name parsing
932 -- Proxmox Support Team <support@proxmox.com> Tue, 30 Apr 2019 14:07:59 +0000
934 qemu-server (5.0-50) unstable; urgency=medium
936 * fix #2100: ignore cloudinit drive on offline migration
938 * honor bandwidth limits (bwlimit) for migrate, drive-mirror, clone
941 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Apr 2019 16:22:10 +0200
943 qemu-server (5.0-49) unstable; urgency=medium
945 * return config lock in vm status
947 * move 'pve-snapshot-name' to common
949 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Mar 2019 12:55:03 +0100
951 qemu-server (5.0-48) unstable; urgency=medium
953 * cloud-init: allow custom network/user data files via snippets
955 * fix #2120: use hosts initiator name with qemu-img
957 * fix #2131: get correct device when deleting iothreads
959 * config: NIC macaddr: enforce unicast MAC addresses
961 * implement suspend to disk for running VMs over API and CLI
963 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Mar 2019 13:25:38 +0100
965 qemu-server (5.0-47) unstable; urgency=medium
967 * fix #2043: always stop existing systemd scopes on VM start
969 * use nr_hugepages from /proc/cmdline
971 * fix #2101: cloudinit: IPv6 ending in : not parsed as a string
973 * fix #1891: Add zsh command completion for qm and qmrestore
975 * fix #2097: allow one to set and pass the WWN parameter for IDE, SATA and
978 * allow one to add IVSHMEM device to a VM configuration
980 * fix #2114: always set correct link status on VM network adapter hotplug
982 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Mar 2019 10:11:00 +0100
984 qemu-server (5.0-46) unstable; urgency=medium
986 * allow explicit hv-vendor-id
988 * allow explicit set vga with gpu passthrough
990 * fix #1924: add snapshot parameter
992 * allow to add pre- start/stop hook scripts
994 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Feb 2019 13:04:19 +0100
996 qemu-server (5.0-45) unstable; urgency=medium
998 * fix #2003: give qm terminal a terminal over ssh
1000 * migrate: fix local disk migration with online VMs
1002 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Jan 2019 10:42:03 +0100
1004 qemu-server (5.0-44) unstable; urgency=medium
1006 * fix #1013 : migrate : sync_disk : --targetstorage with offline disk
1008 * add Windows 7 PCIe quirk for adding 'hostpci' devices
1010 * fix #2032: check that type is set before assembling a VGA device
1012 * add configuration to command regression tests
1014 * allow 'none' as VGA option
1016 * fix #1267: move args to the end of qemu commandline
1018 * clone_disk : cloudinit drive: don't clone snapshot name (snapname)
1020 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Dec 2018 10:17:47 +0100
1022 qemu-server (5.0-43) unstable; urgency=medium
1024 * usb: fix check if machine type is q35
1026 * qm cleanup: exit silently if VM config does not belong to node
1029 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Nov 2018 12:57:49 +0100
1031 qemu-server (5.0-42) unstable; urgency=medium
1033 * add mediated devices support
1035 * use improved lspci
1037 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Nov 2018 11:22:04 +0100
1039 qemu-server (5.0-41) unstable; urgency=medium
1041 * fix #1959: add fallback for auto previously set by SLAAC
1043 * create_vm: don't add vmgenid for ARM machines by default
1045 * use qmeventd to execute qm cleanup
1047 * QemuServer: remove PCI sysfs helpers
1049 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2018 14:38:42 +0100
1051 qemu-server (5.0-40) unstable; urgency=medium
1053 * correctly check display vga type
1055 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Nov 2018 17:27:53 +0100
1057 qemu-server (5.0-39) unstable; urgency=medium
1059 * Add `ssd` property to IDE, SATA, and SCSI drives
1061 * fix #1952: make vga memory configurable
1063 * fix #1969: increase max unused disks
1065 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Nov 2018 16:23:26 +0100
1067 qemu-server (5.0-38) unstable; urgency=medium
1069 * add second qmp socket when running qemu >= 2.12 for pending event/reboot
1072 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Oct 2018 12:28:49 +0200
1074 qemu-server (5.0-37) unstable; urgency=medium
1076 * add virtio to the list of valid gpu types
1078 * lower qemu requirement for hv_synic and hv_stimer to 2.12
1080 * prepare for deprecated functionality in qemu 3.0
1082 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Oct 2018 14:53:04 +0200
1084 qemu-server (5.0-36) unstable; urgency=medium
1086 * fix #1908: add VM Generation ID (vmgenid) device by default on new VMs and
1087 allow to set on existing ones
1089 * fix version check in qemu_machine_feature_enabled
1091 * use qemu's internal blockdev-snapshot functions to avoid some issues with
1092 snapshots on qcow2 files
1094 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2018 11:14:32 +0200
1096 qemu-server (5.0-35) unstable; urgency=medium
1098 * add hv_synic and hv_stimer HyperV Enlightment flags on QEMU 3.0 and later
1100 * improve setting QEMU machine type on snapshot and rollback
1102 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Sep 2018 15:29:18 +0200
1104 qemu-server (5.0-34) unstable; urgency=medium
1106 * fix #1865: CloudInit doesn't add IPv6
1108 * allow to add ibpb, ssbd, virt-ssbd, amd-ssbd, amd-no-ssb and pdpe1gb CPU flags
1110 * clone: improve message for ignoring pending changes
1112 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Sep 2018 11:37:24 +0200
1114 qemu-server (5.0-33) unstable; urgency=medium
1116 * fix #1242: allow one to setup an automatic QEMU guest agent fstrim
1117 command after cloning or moving a disk live
1119 * define return properties for vmstatus API call
1121 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2018 14:40:46 +0200
1123 qemu-server (5.0-32) unstable; urgency=medium
1125 * api/agent: do not dereference parameter hash before passing to
1128 * api/agent: import check_agent_error method
1130 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:55:42 +0200
1132 qemu-server (5.0-31) unstable; urgency=medium
1134 * fix #1717: delete snapshot when vm running and drive not attached
1136 * fix qemu agent commands: add missing import of 'agent_cmd' method
1138 -- Proxmox Support Team <support@proxmox.com> Mon, 30 Jul 2018 10:24:27 +0200
1140 qemu-server (5.0-30) unstable; urgency=medium
1142 * Fix SPICE multi-monitor mode on VMs using q35 machine type
1144 * extend QEMU guest agent API with file read/write, setting VM user password
1145 and executing arbitrary commands in VM
1147 * add guest command group to qm CLI tool
1149 * add 'dryrun' to qm rescan, which only list changes but does not actually
1152 * add a workaround for bug #1650: add content type filter to rescan
1154 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jul 2018 11:39:01 +0200
1156 qemu-server (5.0-29) unstable; urgency=medium
1158 * reserve new VM config with create lock early
1160 * api: allow auto vm start after create finished
1162 * use 'system_wakeup' to resume VMs suspended by their guest OS
1164 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jun 2018 12:11:29 +0200
1166 qemu-server (5.0-28) unstable; urgency=medium
1168 * cloud-init: improve handling of network settings for broken
1169 versions (e.g., the one currently used by CentOS 7)
1171 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jun 2018 12:48:42 +0200
1173 qemu-server (5.0-27) unstable; urgency=medium
1175 * qm agent: check if qga service is running
1177 * fix #1779: vzdump: ensure guest-fsfreeze-thaw is called on error
1179 * fix #1780: change datacenter.conf to datacenter.cfg in description
1181 * fix logic of deleting balloon config property
1183 * activate volume for cloudinit disk
1185 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Jun 2018 15:24:14 +0200
1187 qemu-server (5.0-26) unstable; urgency=medium
1189 * fix #1749: do not copy pending changes when cloning a vm
1191 * make q35 and virtio-scsi-single compatible
1193 * fix an issue where cleanup operations run as part of a VM's systemd scope
1195 * associate cloud-init options with with the VM.Config.Network permission
1197 -- Proxmox Support Team <support@proxmox.com> Mon, 14 May 2018 14:04:26 +0200
1199 qemu-server (5.0-25) unstable; urgency=medium
1201 * fix #1697: only check machine type for pxe
1203 * fix scsi hotplug issue with q35 machines
1205 * fix live migration with local disk issue with nbd
1207 * switch to new method of passing disk serials to qemu
1209 * qemu-img convert: use cache=none for ZFS to not fill up the ARC
1211 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Apr 2018 15:11:58 +0200
1213 qemu-server (5.0-24) unstable; urgency=medium
1215 * use pve-edk2-firmware for supporting OVMF
1217 * restore: implement rate limiting
1219 * stop passing default '-k' (keyboard) QEMU option from datacenter.cfg
1221 * create linked clones of templates by default
1223 * remove legacy vm_monitor_command
1225 * start: always stop an existing $vmid.scope
1227 * implement cloudinit support
1229 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Mar 2018 09:24:08 +0100
1231 qemu-server (5.0-23) unstable; urgency=medium
1233 * fix migrate cache size parameter for qemu 2.11
1235 * typo fixes in migrate task log
1237 * depend on pve-qemu-kvm >= 2.9.1-9
1239 * allow virtio-scsi+iothread controller hot-unplug
1241 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Feb 2018 13:21:08 +0100
1243 qemu-server (5.0-22) unstable; urgency=medium
1245 * fix #1664: nbd mirror: remove socat tunnel now that it is not required
1246 anymore to avoid a 30s inactivity timeout
1248 * fix #1569: add shared flag to disks
1250 * fix #1662: make the 'snapshot' disk parameter work again
1252 * correct 'snapshot' flag description
1254 * CPU types: add EPYC and EPYC-IBPB
1256 * forward returned errors from guest-agent commands
1258 * add new guest-agent commands and add commands as separate api calls
1260 * add agent flag to vm status api call
1262 * clone/restore: make the smbios UUID unique if --unique is used
1264 * add serial:1 to vm-status when config has a serial device configured
1266 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Feb 2018 09:56:08 +0100
1268 qemu-server (5.0-21) unstable; urgency=medium
1270 * fix a case where with the upcoming introduction of sub-commands the spice
1271 ticket could be read from a file rather than received via stdin
1273 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 15:13:23 +0100
1275 qemu-server (5.0-20) unstable; urgency=medium
1277 * added spec-ctrl flag to cpu 'flags' property
1279 * added -IBRS cpu type variants
1281 * added Skylake-Server cpu type
1283 * added --pretty option to 'qm showcmd'
1285 * increase start timeout when hugepages are enabled to compensate for long
1288 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jan 2018 14:26:30 +0100
1290 qemu-server (5.0-19) unstable; urgency=medium
1292 * add 'flags' property to cpu option to allow passing PCID support to VMs
1294 * fix efi disk format detection
1296 * use default values from load_defaults() when none is specified in conf
1298 -- Proxmox Support Team <support@proxmox.com> Tue, 9 Jan 2018 15:49:35 +0100
1300 qemu-server (5.0-18) unstable; urgency=medium
1302 * fix #1570: fix template backup with pigz
1304 * fix #1471: change keyboard default to undef
1306 * fix efi disks in raw mode not being fully writable
1308 * qm terminal: add --escape option to change or disable the escape key
1310 * enable vncproxy with vncterm for serial ports
1312 * add termproxy api call
1314 * stop adding the same disk as unused multiple times when they are reachable
1315 through multiple storage definitions
1317 * check if the guest agent actually runs before a fsfreeze-freeze/thaw
1319 * update ostype documentation
1321 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Dec 2017 14:56:59 +0100
1323 qemu-server (5.0-17) unstable; urgency=medium
1325 * correct cpuunits range
1327 * check if base volumes are unused before deleting a template
1329 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Oct 2017 14:58:00 +0200
1331 qemu-server (5.0-16) unstable; urgency=medium
1333 * add new qm command 'importovf', to create VMs from an OVF manifest
1335 * snapshot: use explicitly configured vmstate storage
1337 * config: add vmstatestorage option
1339 * VM.Snapshot.Rollback privilege added
1341 * migration : enable mtunnel for insecure migration
1343 * ovmf: deprecate old legay ovmf image and refactor
1345 * improve efidisk creation
1347 * efidisk: do not hard code efivar base image size
1349 * fix #1441: do not unplug controllers when the mirroring is finished
1351 * do not overwrite global signal handlers
1353 * update_vm: sort logged parameters
1355 * remove legacy sparsecp
1357 * remove unused obsolete vmtar
1359 * fix #1125: check for KVM support before starting VM
1361 -- Proxmox Support Team <support@proxmox.com> Thu, 5 Oct 2017 11:17:26 +0200
1363 qemu-server (5.0-15) unstable; urgency=medium
1365 * reduce migration downtime
1367 * fix freezing logic when saving vm states
1369 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Aug 2017 10:46:33 +0200
1371 qemu-server (5.0-14) unstable; urgency=medium
1373 * fix disk throttle parameters
1375 * improve compatibility when live-migrating from pve-4
1377 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Jul 2017 11:17:53 +0200
1379 qemu-server (5.0-13) unstable; urgency=medium
1381 * Fix #1417: make sure the target storage allows disk images before importing
1383 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Jul 2017 06:48:43 +0200
1385 qemu-server (5.0-12) unstable; urgency=medium
1387 * Use default values when memory is not set in vm.conf when migrating
1389 -- Proxmox Support Team <support@proxmox.com> Mon, 03 Jul 2017 14:39:25 +0200
1391 qemu-server (5.0-11) unstable; urgency=medium
1393 * Fix #1417: properly check for 'images' content type when allocating disks
1395 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Jun 2017 09:33:17 +0200
1397 qemu-server (5.0-10) unstable; urgency=medium
1399 * don't use cirrus by default for sane OS'
1401 * replication: remove guest states to ensure no old states are exists
1403 * allow disks on shared storages on replicated VMs
1405 * refuse to add non-replicatable disks to replicating VMs
1407 * config: has_feature() take default for backup into account
1409 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jun 2017 13:26:38 +0200
1411 qemu-server (5.0-9) unstable; urgency=medium
1413 * migrate: use 'mtunnel' from pvecm
1415 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 11:01:15 +0200
1417 qemu-server (5.0-8) unstable; urgency=medium
1419 * migrate: pass the with_snapshots parameter
1421 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 12:58:33 +0200
1423 qemu-server (5.0-7) unstable; urgency=medium
1425 * PVE/QemuMigrate.pm: use new replication job helpers from AbstractMigrate
1427 * Change target in replication-state when replication direction is switched
1429 * PVE/QemuMigrate.pm: use replication job, transfer replication state
1431 * add regression tests for get_replicatable_volumes
1433 * get_replicatable_volumes: fix CDROM and local file/device handling
1435 * get_replicatable_volumes: add unused volumes
1437 * get_replicatable_volumes: skip volumes if we do not 'own' them
1439 * PVE::QemuServer::foreach_volid - pass $attr hash to callback
1441 * get_replicatable_volumes: skip volumes on shared storage
1443 * PVE/API2/Qemu.pm: aquire guest_migration_lock inside worker
1445 * Add a migration lock to avoid a replication on rollback-time
1447 * change from dpkg-deb to dpkg-buildpackage
1449 * fix #1405: sort pci ids by functions
1451 * Add new qm command 'importdisk' to import external disk images
1453 * migration: implement insecure offline migration
1455 * check also pending changes when reverting/deleting
1457 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2017 08:50:45 +0200
1459 qemu-server (5.0-6) unstable; urgency=medium
1461 * fix burst length parameter names and pass them to qemu
1463 * fix #1229: more explicit spice port allocation
1465 * migrate: acquire guest_migration_lock during migration
1467 * do not allow destroy if there are replication jobs
1469 * use new PVE::ReplicationConfig class
1471 * improve error on '{full, linked} clone not available' error
1473 * Fix #1384: add missing decrement to calculation of socket-id
1475 * migrate: pass ssh_info to storage_migrate
1477 * tests: fix broken snapshot create tests
1479 * tests: fix broken snapshot delete tests
1481 * use ReuseAddr for vncproxy
1483 * Fix #1361: create disk: stricter parsing of storage:size
1485 * PVE::QemuServer::create_disks - run code inside eval
1487 * implement get_replicatable_volumes
1489 * add description of read/writes statistics in vzdump output
1491 * start vncproxy worker in the background
1493 -- Proxmox Support Team <support@proxmox.com> Wed, 31 May 2017 09:21:27 +0200
1495 qemu-server (5.0-5) unstable; urgency=medium
1497 * added rerror option to scsi drives
1499 * added storage replication settings
1501 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Apr 2017 14:02:08 +0200
1503 qemu-server (5.0-4) unstable; urgency=medium
1505 * fix target storage availability check for live migration with local
1508 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 12:05:58 +0200
1510 qemu-server (5.0-3) unstable; urgency=medium
1512 * fix vnc connections showing false errors
1514 * fix #1338: handle writer count limit in live migration with local disks
1517 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Apr 2017 11:47:07 +0200
1519 qemu-server (5.0-2) unstable; urgency=medium
1521 * fix drive mirror readyness check
1523 * fix uninitialized warning when deleting unset VM option
1525 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Apr 2017 16:27:59 +0200
1527 qemu-server (5.0-1) unstable; urgency=medium
1529 * bump version for stretch
1531 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:59:35 +0100
1533 qemu-server (4.0-109) unstable; urgency=medium
1535 * drop netcat6 dependency
1537 * fix a case where VMs refuse to start with scsi disk ids >= 7
1539 * add skylake to cpu models
1541 * improve error messages
1543 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 11:56:14 +0100
1545 qemu-server (4.0-109) unstable; urgency=medium
1549 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Feb 2017 11:40:53 +0100
1551 qemu-server (4.0-108) unstable; urgency=medium
1553 * #1260: convert moved template disk to base
1555 * change TLS cipher suite to HIGH for spiceterm
1557 -- Proxmox Support Team <support@proxmox.com> Tue, 31 Jan 2017 13:54:42 +0100
1559 qemu-server (4.0-107) unstable; urgency=medium
1561 * add dependency on libpve-guest-common-perl
1563 * add dependency on libpve-common-perl
1565 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:47:09 +0100
1567 qemu-server (4.0-106) unstable; urgency=medium
1569 * only use scsi-block with explicit opt-in
1571 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jan 2017 09:19:20 +0100
1573 qemu-server (4.0-105) unstable; urgency=medium
1575 * use new PVE::Storage::check_volume_access()
1577 * Set zero $size and continue if volume_resize() returns false
1579 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Jan 2017 09:19:45 +0100
1581 qemu-server (4.0-104) unstable; urgency=medium
1583 * add setup_environment hook to CLIHandler classes
1585 * cleanup: drop superfluous condition in assignment
1587 * add romfile option to hostpci
1589 * add with-local-disks option for live storage migration
1591 * drive-mirror: bump timeout to 5s, add 30s inactivity timeout
1593 * live clone_vm: suspend or freezefs before block-job-cancel
1595 * add socat and unix socket for storage migration
1597 * add live storage migration with vm migration
1599 * clone live vm : add support for multiple jobs
1601 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Jan 2017 14:15:01 +0100
1603 qemu-server (4.0-103) unstable; urgency=medium
1605 * destroy_vm: allow vdisk_free to fail
1607 * Display volume size in log when doing a volume backup
1609 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Dec 2016 12:40:40 +0100
1611 qemu-server (4.0-102) unstable; urgency=medium
1613 * avoid "No balloon device has been activated" warnings in vmstatus
1615 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2016 10:12:55 +0100
1617 qemu-server (4.0-101) unstable; urgency=medium
1619 * allow migration of local qcow2 snapshots
1621 -- Proxmox Support Team <support@proxmox.com> Mon, 5 Dec 2016 12:38:54 +0100
1623 qemu-server (4.0-100) unstable; urgency=medium
1625 * allow insecure migrations from older qemu-servers
1627 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Dec 2016 18:50:54 +0100
1629 qemu-server (4.0-99) unstable; urgency=medium
1631 * qm agent: remove 'guest-' prefix from commands
1633 * qm agent: pass command as second required argument
1635 * qm agent: add output formatter
1637 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Dec 2016 07:58:34 +0100
1639 qemu-server (4.0-98) unstable; urgency=medium
1641 * Add "qm agent" command
1643 * increase timeout for guest-fsfreeze-freeze
1645 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2016 12:31:36 +0100
1647 qemu-server (4.0-97) unstable; urgency=medium
1649 * Add entry for windows 10 and 2016 support
1651 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2016 09:09:23 +0100
1653 qemu-server (4.0-96) unstable; urgency=medium
1655 * restrict monitor API to Sys.Modify for most commands
1657 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 10:02:37 +0100
1659 qemu-server (4.0-95) unstable; urgency=medium
1661 * vm_shutdown: request 'stopped' state for HA enabled VMs
1663 * use ha-manager 'stopped' state instead of 'disabled'
1665 * switch to 'ha-manager set' (instead of 'ha-manager start/stop')
1667 * vmstate snapshot: activate|deactivate volume
1669 * qemu_volume_snapshot_delete : fix krbd snapshot delete
1671 * VZDump/QemuServer: set bless class correctly
1673 * cleanup windows version handling and hyperv enlightments
1675 * remove unnecessary format_description properties
1677 * register new standard option 'pve-qm-image-format'
1679 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2016 08:11:08 +0100
1681 qemu-server (4.0-94) unstable; urgency=medium
1683 * fix docs for iops/bps_max_length throttling options
1685 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 12:53:44 +0100
1687 qemu-server (4.0-93) unstable; urgency=medium
1689 * Close #1195: support iops/bps_max_length throttling options
1691 * fix a perl warning when failing to parse a new drive string
1693 * fix a warning: discard is not a number
1695 * fix #1177: allow dedicated migration network
1697 * change default value for cpuunits to 1024
1699 -- Proxmox Support Team <support@proxmox.com> Thu, 03 Nov 2016 10:26:03 +0100
1701 qemu-server (4.0-92) unstable; urgency=medium
1703 * Close #351: add more info to backup log
1705 * add qm listsnapshot call
1707 * snapshot_list: add bash completion for vmid
1709 * Fix #1174: remove pve-qm-drive
1711 * enable drive-mirror with iothread for qemu 2.7 v2
1713 * add get_running_qemu_version
1715 * cpu hotplug : add new cpu hotplug method for qemu 2.7
1717 * cpu hotplug : add coldplugged cpu to qemu command line
1719 * cpu hotplug : add print_cpu_device
1721 * numaX : use cpus option multiple time if cpulist
1723 -- Proxmox Support Team <support@proxmox.com> Fri, 21 Oct 2016 09:13:39 +0200
1725 qemu-server (4.0-91) unstable; urgency=medium
1727 * fix #1131: activate volume before copying efidisk
1729 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Oct 2016 08:21:19 +0200
1731 qemu-server (4.0-90) unstable; urgency=medium
1733 * fix #1111: qm showcmd wrong escape sequence
1735 * Avoid to parse empty property string
1737 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2016 07:13:33 +0200
1739 qemu-server (4.0-89) unstable; urgency=medium
1741 * fix manual page (use efidisk0 instead of efidisk[N])
1743 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Sep 2016 12:21:07 +0200
1745 qemu-server (4.0-88) unstable; urgency=medium
1747 * restore: better error handling for vdisk deletion
1749 * forbid migration of template with local base image
1751 * forbid restore into existing template
1753 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Sep 2016 07:49:45 +0200
1755 qemu-server (4.0-87) unstable; urgency=medium
1757 * add seabios bootsplash and use it
1759 * add efidisk0 to config, use efidisk0 for efivars
1761 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Sep 2016 12:34:23 +0200
1763 qemu-server (4.0-86) unstable; urgency=medium
1765 * hostpci: bring back multifunction pass-through shortcut
1767 * disable drive-mirror when iothread is enabled
1769 * hugepages: map numa node IDs to host and guest correctly
1771 * hugepages: use hostnodes value as numanode for topology
1773 * qemu-img convert : use default cache=unsafe instead writeback
1775 * Fix #1057: make protection a fast-plug option
1777 * add lock check for move_disk API call
1779 * deactivate new volumes after clone to other node
1781 * pass datacenter.cfg's mac_prefix to random_ether_addr
1783 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Aug 2016 10:11:07 +0200
1785 qemu-server (4.0-85) unstable; urgency=medium
1787 * Fix #1051: typo: vpcus -> vcpus - so non-root users can change vcpus again
1789 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 14:46:43 +0200
1791 qemu-server (4.0-84) unstable; urgency=medium
1793 * fix #1046: add non-snapshotted disks as unused
1795 * fix #1040: warn early about moving a snapshotted disk
1797 * disable usb hotplug for now
1799 * remove old move disk snapshot check
1801 * improve errors when trying to migrate disks with snapshots
1803 -- Proxmox Support Team <support@proxmox.com> Mon, 11 Jul 2016 11:50:01 +0200
1805 qemu-server (4.0-83) unstable; urgency=medium
1807 * Add hugepages option
1809 * Refactor various parts out of QemuServer
1811 * Include USB devices in vm_devices_list
1813 * Add usb hotplugging
1815 * Fix syntax in pve-q35.cfg
1817 * Fix #146: add name to backup log
1819 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Jun 2016 11:29:01 +0200
1821 qemu-server (4.0-82) unstable; urgency=medium
1823 * add dependency on DBus
1825 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jun 2016 11:48:45 +0200
1827 qemu-server (4.0-81) unstable; urgency=medium
1829 * Add LVM and LVMThin to QemuMigration
1831 * add check for snapshots at migration
1833 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Jun 2016 12:10:48 +0200
1835 qemu-server (4.0-80) unstable; urgency=medium
1837 * split old style pipe open call
1839 * fix #1020: remove unnecessary root check for unused disks
1841 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jun 2016 18:13:03 +0200
1843 qemu-server (4.0-79) unstable; urgency=medium
1845 * migrate: collect migration tunnel child process (avoid zombies)
1847 * migrate: use ssh forwarded UNIX socket tunnel
1849 * migrate: add some more log output
1851 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 12:16:31 +0200
1853 qemu-server (4.0-78) unstable; urgency=medium
1855 * use enter_systemd_scope instead of systemd-run
1857 * fix #1010: whitelist options for permissions
1859 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jun 2016 11:42:25 +0200
1861 qemu-server (4.0-77) unstable; urgency=medium
1863 * do not ignore hotplug parse errors
1865 -- Proxmox Support Team <support@proxmox.com> Tue, 31 May 2016 12:15:55 +0200
1867 qemu-server (4.0-76) unstable; urgency=medium
1869 * allow VLAN 1 tag in qemu-kvm vms
1871 -- Proxmox Support Team <support@proxmox.com> Wed, 18 May 2016 11:25:54 +0200
1873 qemu-server (4.0-75) unstable; urgency=medium
1875 * fix #975, use new keyAlias feature.
1877 * add --description to systemd scope unit
1879 -- Proxmox Support Team <support@proxmox.com> Wed, 11 May 2016 11:15:56 +0200
1881 qemu-server (4.0-74) unstable; urgency=medium
1883 * correctly set cpu vendor
1885 * fix #971: don't activate shared storage in offline migration
1887 * migrate: check if storage is available
1889 -- Proxmox Support Team <support@proxmox.com> Sun, 01 May 2016 09:25:06 +0200
1891 qemu-server (4.0-73) unstable; urgency=medium
1893 * restore: pass format to vma extract
1895 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Apr 2016 09:03:12 +0200
1897 qemu-server (4.0-72) unstable; urgency=medium
1899 * vm_start : force systemctl stop if orphan scope exist
1901 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Apr 2016 11:09:52 +0200
1903 qemu-server (4.0-71) unstable; urgency=medium
1905 * Fix #643: activate volumes before resizing
1907 * fix #947: reenable disk/cdrom passthrough
1909 -- Proxmox Support Team <support@proxmox.com> Thu, 21 Apr 2016 10:34:42 +0200
1911 qemu-server (4.0-70) unstable; urgency=medium
1913 * vm_status: return more verbose HA state
1915 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Apr 2016 09:01:24 +0200
1917 qemu-server (4.0-69) unstable; urgency=medium
1919 * Fix #848: deactivate old volume after clone before deletion
1921 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Apr 2016 08:24:49 +0200
1923 qemu-server (4.0-68) unstable; urgency=medium
1925 * change shutdown behaviour on suspended vm
1927 -- Proxmox Support Team <support@proxmox.com> Tue, 12 Apr 2016 17:19:20 +0200
1929 qemu-server (4.0-67) unstable; urgency=medium
1931 * use pve-doc-generator to generate man pages
1933 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Apr 2016 07:37:16 +0200
1935 qemu-server (4.0-66) unstable; urgency=medium
1937 * use generic property string parser
1939 * drive schema: allow 'none' again
1941 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Apr 2016 09:33:16 +0200
1943 qemu-server (4.0-65) unstable; urgency=medium
1945 * cfg: use the 'urlencoded' format for drive model and serial
1947 * clone: use the zeroinit filter for sparseinit storages
1949 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Mar 2016 09:09:07 +0100
1951 qemu-server (4.0-64) unstable; urgency=medium
1953 * Use AbstractConfig for Qemu
1955 * fix #909: pass rate to tap_plug()
1957 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Mar 2016 11:43:28 +0100
1959 qemu-server (4.0-63) unstable; urgency=medium
1961 * only perform scsi inquiry on device nodes
1963 -- Proxmox Support Team <support@proxmox.com> Sat, 27 Feb 2016 10:20:50 +0100
1965 qemu-server (4.0-62) unstable; urgency=medium
1967 * fix undefined value when starting a q35 machine VM
1969 * kvm_user_version: update code to use our framework
1971 * Refactor has_feature
1973 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Feb 2016 17:02:34 +0100
1975 qemu-server (4.0-61) unstable; urgency=medium
1977 * clone_vm : only deactivate sources volume if source vm if offline
1979 * Refactor snapshot_create to match LXC.pm
1981 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Feb 2016 08:48:59 +0100
1983 qemu-server (4.0-60) unstable; urgency=medium
1985 * change check for write-zeros
1987 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Feb 2016 17:19:12 +0100
1989 qemu-server (4.0-59) unstable; urgency=medium
1991 * qemu_machine_pxe : return $machine if no pxe
1993 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Feb 2016 17:37:11 +0100
1995 qemu-server (4.0-58) unstable; urgency=medium
1997 * deactivate volumes if vm start command fails
1999 -- Proxmox Support Team <support@proxmox.com> Sat, 20 Feb 2016 10:26:28 +0100
2001 qemu-server (4.0-57) unstable; urgency=medium
2003 * delete ram state files when restoring a backup
2005 * Refactor snapshot code
2007 * disable vnc server and add -nographic is no vga card is present
2009 * passthrough : reenable hyperv and add hv_vendor_id for windows
2011 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Feb 2016 12:47:51 +0100
2013 qemu-server (4.0-56) unstable; urgency=medium
2015 * If we freeze the fs with the Qemu-Guest-Agent test if QGA is running.
2017 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2016 12:51:19 +0100
2019 qemu-server (4.0-55) unstable; urgency=medium
2021 * improve usb config parsing
2023 * Refactor update_config_nolock -> write_config
2025 -- Proxmox Support Team <support@proxmox.com> Fri, 12 Feb 2016 12:07:56 +0100
2027 qemu-server (4.0-54) unstable; urgency=medium
2029 * restore: deal with new backup=0 property string
2031 * add usb3 option for usb-devices
2033 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Feb 2016 17:49:19 +0100
2035 qemu-server (4.0-53) unstable; urgency=medium
2037 * pass $skiplock all the way through to destroy_vm
2039 -- Proxmox Support Team <support@proxmox.com> Mon, 08 Feb 2016 11:53:03 +0100
2041 qemu-server (4.0-52) unstable; urgency=medium
2043 * close tunnel after migration is finish.
2045 -- Proxmox Support Team <support@proxmox.com> Tue, 02 Feb 2016 18:16:47 +0100
2047 qemu-server (4.0-51) unstable; urgency=medium
2049 * Fix #878: disk-size format
2051 * Fix #879: exclusion of disk for backup
2053 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Jan 2016 10:04:41 +0100
2055 qemu-server (4.0-50) unstable; urgency=medium
2057 * add hidden option to cpu type
2059 * fix PVE::HA use clause so HA resources get registered
2061 * Create firewall dir on VM restore
2063 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 16:57:43 +0100
2065 qemu-server (4.0-49) unstable; urgency=medium
2067 * increase version to update test environment
2069 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Jan 2016 12:50:07 +0100
2071 qemu-server (4.0-48) unstable; urgency=medium
2073 * use safe_string_ne for trunks
2075 -- Proxmox Support Team <support@proxmox.com> Mon, 18 Jan 2016 16:58:23 +0100
2077 qemu-server (4.0-47) unstable; urgency=medium
2079 * add support for network trunks
2081 -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jan 2016 17:27:32 +0100
2083 qemu-server (4.0-46) unstable; urgency=medium
2085 * Closes #787: add Haswell-noTSX and Broadwell-noTSX cpu types
2087 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 16:42:05 +0100
2089 qemu-server (4.0-45) unstable; urgency=medium
2091 * io throttle: pass pool parameters (*_max)
2093 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Jan 2016 06:17:52 +0100
2095 qemu-server (4.0-44) unstable; urgency=medium
2097 * ovmf : don't pass x-vga to vfio-pci
2099 * check for quorum when starting a VM
2101 -- Proxmox Support Team <support@proxmox.com> Sun, 10 Jan 2016 15:11:43 +0100
2103 qemu-server (4.0-43) unstable; urgency=medium
2105 * disable hyper-v enlightment when xvga is enabled
2107 -- Proxmox Support Team <support@proxmox.com> Mon, 04 Jan 2016 06:26:31 +0100
2109 qemu-server (4.0-42) unstable; urgency=medium
2111 * add detect_zeroes option
2113 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Dec 2015 09:20:18 +0100
2115 qemu-server (4.0-41) unstable; urgency=medium
2117 * add new option to select BIOS (--bios <seabios|ovmf>)
2119 * fix bug #841: replace get_used_paths with is_volume_in_use
2121 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 11:15:23 +0100
2123 qemu-server (4.0-40) unstable; urgency=medium
2125 * qm: Add VMID auto completion to some commands
2127 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Dec 2015 12:22:25 +0100
2129 qemu-server (4.0-39) unstable; urgency=medium
2131 * fix bug #828: activate disks before hotplugging them
2133 * fix bug #783: set KillMode=none, so that systemd don't kill
2136 * reenable steal time
2138 * backup/restore firewall config with vzdump
2140 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Nov 2015 16:50:11 +0100
2142 qemu-server (4.0-38) unstable; urgency=medium
2144 * Don't treat serial devices as a local resource if they
2147 * qemu_img_convert: activate source volume
2149 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Nov 2015 07:02:01 +0100
2151 qemu-server (4.0-37) unstable; urgency=medium
2153 * add pve-bridge-hotplug script
2155 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 16:24:44 +0100
2157 qemu-server (4.0-36) unstable; urgency=medium
2159 * use qom-get to check if old pxe network rom file are used
2161 * migration: improve ipv6 case
2163 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Nov 2015 07:56:14 +0100
2165 qemu-server (4.0-35) unstable; urgency=medium
2167 * clone: use a fullclone hash instead of $drive->{full}
2169 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Oct 2015 07:06:47 +0100
2171 qemu-server (4.0-34) unstable; urgency=medium
2173 * use old netdevice bios files for older machine types (<= 2.4)
2175 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2015 09:08:49 +0100
2177 qemu-server (4.0-31) unstable; urgency=medium
2179 * migrate : add nocheck for resume
2181 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2015 12:41:43 +0200
2183 qemu-server (4.0-30) unstable; urgency=medium
2185 * qmrestore: implement bash completion
2187 * create: add better check for unused IDs
2189 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Oct 2015 13:13:07 +0200
2191 qemu-server (4.0-29) unstable; urgency=medium
2193 * support serial numbers and models for disks
2195 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Sep 2015 10:56:30 +0200
2197 qemu-server (4.0-28) unstable; urgency=medium
2199 * disable kvm_steal_time, because it's currently buggy with live migration
2201 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 07:14:44 +0200
2203 qemu-server (4.0-27) unstable; urgency=medium
2205 * allow to change boot order with VM.Config.Options privileges
2207 -- Proxmox Support Team <support@proxmox.com> Sat, 26 Sep 2015 11:07:11 +0200
2209 qemu-server (4.0-26) unstable; urgency=medium
2211 * migration: disable compress (already default)
2213 * migration: enable xbzrle
2215 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Sep 2015 17:59:30 +0200
2217 qemu-server (4.0-25) unstable; urgency=medium
2219 * fix kvm version parser for CVE stable releases
2221 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Sep 2015 11:48:09 +0200
2223 qemu-server (4.0-24) unstable; urgency=medium
2225 * improve VM protection mode
2227 * pci passthough : make vfio default
2229 * fix error message: allocate to much v-CPUs
2231 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Sep 2015 12:28:19 +0200
2233 qemu-server (4.0-23) unstable; urgency=medium
2235 * destroy: avoid warning about undefined 'protection' value
2237 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Sep 2015 09:38:30 +0200
2239 qemu-server (4.0-22) unstable; urgency=medium
2241 * add possibility to restore backup on rbd in krbd mode
2243 * add krbd support to online snapshot
2245 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Sep 2015 07:55:31 +0200
2247 qemu-server (4.0-21) unstable; urgency=medium
2249 * qm: implement bash completion
2251 * add VM protection mode
2253 * fix move_disk on RBD
2255 * add HA resources check before destroying a VM
2257 -- Proxmox Support Team <support@proxmox.com> Tue, 08 Sep 2015 10:51:05 +0200
2259 qemu-server (4.0-20) unstable; urgency=medium
2261 * fix start kvm with os type 'other'
2263 * spice console: fix 'uninitialized value in concat' due to unnamed VM
2265 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Aug 2015 11:39:52 +0200
2267 qemu-server (4.0-19) unstable; urgency=medium
2269 * clone: also copy vm firewall config file
2271 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Aug 2015 06:50:04 +0200
2273 qemu-server (4.0-18) unstable; urgency=medium
2275 * fix bug #688: if vm is not owner of this disk remove from config
2277 -- Proxmox Support Team <support@proxmox.com> Thu, 20 Aug 2015 12:30:52 +0200
2279 qemu-server (4.0-17) unstable; urgency=medium
2281 * fix bug #603: vmid.fw file not deleted
2283 * fix bug #517: improve error message
2285 * adapt /config and /pending API calls to force-delete
2287 -- Proxmox Support Team <support@proxmox.com> Wed, 19 Aug 2015 15:44:53 +0200
2289 qemu-server (4.0-16) unstable; urgency=medium
2291 * remove vm access permissions after destroy
2293 * pending-delete: remember force-deletes
2295 * correctly handle empty description in pending section
2297 -- Proxmox Support Team <support@proxmox.com> Fri, 14 Aug 2015 08:09:44 +0200
2299 qemu-server (4.0-15) unstable; urgency=medium
2301 * Fixed wrong UUID in Qemu VZDump backup
2303 * add memory_unplug support V2
2305 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jul 2015 11:32:51 +0200
2307 qemu-server (4.0-14) unstable; urgency=medium
2309 * fixed bug 662: wrong subroutine for parsing startup order
2311 * cpuflags : don't enforce with tcg mode
2313 * cpuflags : remove enforce for cpumodel=host
2315 * cpuflags : remove -rdtscp for Opteron cpu models
2317 * vzdump : abord backup if disk have iothread enabled
2319 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Jul 2015 13:24:31 +0200
2321 qemu-server (4.0-13) unstable; urgency=medium
2323 * drive-mirror: now allow interrupts at the scanning bitmap phase
2325 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Jul 2015 06:40:52 +0200
2327 qemu-server (4.0-12) unstable; urgency=medium
2329 * remove outdated host_device format
2331 * parse_drive: do not overwrite configured format
2333 * fix aio O_DIRECT check for cdrom drives
2335 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Jun 2015 10:32:09 +0200
2337 qemu-server (4.0-11) unstable; urgency=medium
2339 * activate-noawait pve-api-updates
2341 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Jun 2015 12:36:15 +0200
2343 qemu-server (4.0-10) unstable; urgency=medium
2345 * implement cgroups through systemd-run
2347 * implement hotplug for cpuunits
2349 * remove old openvz fairscheduler code
2351 -- Proxmox Support Team <support@proxmox.com> Fri, 29 May 2015 08:24:33 +0200
2353 qemu-server (4.0-9) unstable; urgency=medium
2355 * qmp drive-mirror : set big timeout
2357 * qemu-mirror : block job complete : use ready flag
2359 -- Proxmox Support Team <support@proxmox.com> Tue, 12 May 2015 08:19:38 +0200
2361 qemu-server (4.0-8) unstable; urgency=medium
2363 * trigger pve-api-updates event
2365 -- Proxmox Support Team <support@proxmox.com> Tue, 05 May 2015 14:57:55 +0200
2367 qemu-server (4.0-7) unstable; urgency=medium
2369 * cleanup: use new standard option 'pve-startup-order'
2371 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Apr 2015 10:04:04 +0200
2373 qemu-server (4.0-6) unstable; urgency=medium
2375 * fix ha resource names
2377 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Apr 2015 13:11:12 +0200
2379 qemu-server (4.0-5) unstable; urgency=medium
2381 * use new pve-ha-manager
2383 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Mar 2015 12:48:41 +0100
2385 qemu-server (4.0-4) unstable; urgency=medium
2387 * add qemu cpu flags optimisations for kernel 3.10
2389 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Mar 2015 08:58:56 +0100
2391 qemu-server (4.0-3) unstable; urgency=medium
2393 * vmstatus: use vcpus if defined
2395 * balloon: use qom-get for guest balloon statistics
2397 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2015 08:22:47 +0100
2399 qemu-server (4.0-2) unstable; urgency=medium
2401 * drive_add: escape \ character
2403 * bugfix: allow manual balloning if shares = 0
2405 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2015 10:21:52 +0100
2407 qemu-server (4.0-1) unstable; urgency=medium
2409 * updated for debian jessie
2411 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Feb 2015 13:00:56 +0100
2413 qemu-server (3.3-20) unstable; urgency=low
2415 * correctly set an remove lock (fix "qm unlock")
2417 -- Proxmox Support Team <support@proxmox.com> Sun, 15 Feb 2015 09:05:40 +0100
2419 qemu-server (3.3-19) unstable; urgency=low
2421 * commit pending values when changing CDROM
2423 -- Proxmox Support Team <support@proxmox.com> Sat, 14 Feb 2015 09:24:03 +0100
2425 qemu-server (3.3-18) unstable; urgency=low
2427 * bugfix : add missing queues nic option in print_net
2429 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Feb 2015 09:05:21 +0100
2431 qemu-server (3.3-17) unstable; urgency=low
2435 * This fix hotplug for devices behind bridges
2437 * check possibility to rollback a snapshot early
2439 -- Proxmox Support Team <support@proxmox.com> Thu, 12 Feb 2015 08:19:02 +0100
2441 qemu-server (3.3-16) unstable; urgency=low
2443 * QemuServer: fix wrong binding of pci root ports, bridges or switches
2446 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2015 06:32:14 +0100
2448 qemu-server (3.3-15) unstable; urgency=low
2450 * code cleanup: add foreach_dimm sub
2452 * hotplug: memory hotplug option is not hotpluggable
2454 * fix bug 597: hotplug fix
2456 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Feb 2015 07:05:05 +0100
2458 qemu-server (3.3-14) unstable; urgency=low
2460 * include memory hotplug patch
2462 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jan 2015 07:11:10 +0100
2464 qemu-server (3.3-13) unstable; urgency=low
2466 * hotplug config: allow to enable specific features
2468 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Jan 2015 12:39:21 +0100
2470 qemu-server (3.3-12) unstable; urgency=low
2472 * add new vcpus option
2474 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jan 2015 08:04:44 +0100
2476 qemu-server (3.3-11) unstable; urgency=low
2478 * enable hotplug by default
2480 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jan 2015 08:53:10 +0100
2482 qemu-server (3.3-10) unstable; urgency=low
2484 * Support additional e1000 variants for VM machines
2486 * Add link_down flag to network config
2488 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jan 2015 07:15:48 +0100
2490 qemu-server (3.3-9) unstable; urgency=low
2492 * pending api : fix parsing 0 value
2494 * fix test for ballon hotplug
2496 * set boot strict=on to prevent booting from not listed boot devices
2498 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Jan 2015 06:23:10 +0100
2500 qemu-server (3.3-8) unstable; urgency=low
2502 * new 'pending changes' API
2504 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Jan 2015 13:32:46 +0100
2506 qemu-server (3.3-7) unstable; urgency=low
2508 * vzdump: use qga freeze in vzdump in snapshot mode
2510 * add custom numa topology support
2512 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Dec 2014 17:24:24 +0100
2514 qemu-server (3.3-6) unstable; urgency=low
2516 * API change: snapshot_create - remove unused freezefs flag.
2518 * snapshot_create: call fsfreeze if agent flag is set
2520 * qmpclient: use guest-sync-delimited
2522 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Dec 2014 12:34:50 +0100
2524 qemu-server (3.3-5) unstable; urgency=low
2526 * drive-mirror: cleanups, avoid division by zero bug
2528 * shutdown by Qemu Guest Agent if the agent flag is set
2530 * savevm-end : wait that savevm is finished
2532 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Dec 2014 09:31:17 +0100
2534 qemu-server (3.3-4) unstable; urgency=low
2536 * serial: allow to pass arbitrary device names
2538 * Add check if host has enough real CPUs for starting VM
2540 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Nov 2014 07:42:10 +0100
2542 qemu-server (3.3-3) unstable; urgency=low
2544 * drive-mirror: further improvments
2546 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Nov 2014 06:32:04 +0100
2548 qemu-server (3.3-2) unstable; urgency=low
2550 * drive-mirror: wait that busy eq false before block-job-complete
2552 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Nov 2014 15:35:55 +0100
2554 qemu-server (3.3-1) unstable; urgency=low
2556 * enable write zeroes optimisations
2558 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Oct 2014 10:35:49 +0200
2560 qemu-server (3.1-35) unstable; urgency=low
2562 * fix bug #542: return VMID as integer
2564 -- Proxmox Support Team <support@proxmox.com> Wed, 17 Sep 2014 15:52:34 +0200
2566 qemu-server (3.1-34) unstable; urgency=low
2568 * hotplug: allow scsi and virtio-scsi disk hotplug|unplug
2570 -- Proxmox Support Team <support@proxmox.com> Mon, 01 Sep 2014 11:35:49 +0200
2572 qemu-server (3.1-33) unstable; urgency=low
2574 * clone_vm: auto generate new uuid
2576 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Aug 2014 09:23:58 +0200
2578 qemu-server (3.1-32) unstable; urgency=low
2580 * add Broadwell cpu model
2582 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2014 12:21:08 +0200
2584 qemu-server (3.1-31) unstable; urgency=low
2586 * fix bug 529: fix virtio-serial when using q35 machines
2588 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Aug 2014 06:17:08 +0200
2590 qemu-server (3.1-30) unstable; urgency=low
2592 * bump max hostpci to 4
2594 * set vga=none if x-vga passthrough is enabled
2596 -- Proxmox Support Team <support@proxmox.com> Wed, 06 Aug 2014 09:41:36 +0200
2598 qemu-server (3.1-29) unstable; urgency=low
2600 * vm_stop: do not use ha commands if $migratedfrom is set
2602 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jul 2014 06:53:05 +0200
2604 qemu-server (3.1-28) unstable; urgency=low
2606 * disable kvm cpu signature if x-vga is enabled
2608 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jul 2014 06:52:25 +0200
2610 qemu-server (3.1-27) unstable; urgency=low
2612 * pci passthrough: Reset device only if has_fl_reset is defined
2614 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jul 2014 06:11:49 +0200
2616 qemu-server (3.1-26) unstable; urgency=low
2618 * enable linked clones from snapshots (ceph)
2620 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jul 2014 09:28:47 +0200
2622 qemu-server (3.1-25) unstable; urgency=low
2624 * allow resize of virtio windows boot disk (virtio-win-0.1-74 have
2625 fixed the resize bug)
2627 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jul 2014 12:48:03 +0200
2629 qemu-server (3.1-24) unstable; urgency=low
2631 * new option smbios1: specify SMBIOS type 1 fields (uuid, ...)
2633 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Jun 2014 11:13:27 +0200
2635 qemu-server (3.1-23) unstable; urgency=low
2637 * vncproxy: remove check if VM is running
2639 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:56:02 +0200
2641 qemu-server (3.1-22) unstable; urgency=low
2643 * hostpci: add pci multifunction support
2645 * hostpci: add pcie and x-vga passthrough
2647 -- Proxmox Support Team <support@proxmox.com> Wed, 25 Jun 2014 09:31:30 +0200
2649 qemu-server (3.1-21) unstable; urgency=low
2651 * protect websocket API with vncticket
2653 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Jun 2014 17:43:25 +0200
2655 qemu-server (3.1-20) unstable; urgency=low
2657 * vncwebsocket: do not proxy connection (not required)
2659 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 12:45:39 +0200
2661 qemu-server (3.1-19) unstable; urgency=low
2663 * do not depend on novnc-pve package (use new HTTPServer feature instead)
2665 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jun 2014 11:04:48 +0200
2667 qemu-server (3.1-18) unstable; urgency=low
2669 * depend on novnc-pve package
2671 * support webockets for VNC console
2673 * migration : add setup state
2675 * add virtio-net multiqueue support
2677 * add firewall option to qemu network interface
2679 * add initiator-name to iscsi drives if configured
2681 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jun 2014 09:00:03 +0200
2683 qemu-server (3.1-17) unstable; urgency=low
2685 * depend on pve-firewall package
2687 -- Proxmox Support Team <support@proxmox.com> Tue, 06 May 2014 11:28:26 +0200
2689 qemu-server (3.1-16) unstable; urgency=low
2691 * fix bug #502: allow creation of empty vma archives
2693 * fix bug #510: move_disk - don't delete disk if used in a previous snasphot
2695 * qmrestore: removed short timeout
2697 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Apr 2014 09:29:26 +0200
2699 qemu-server (3.1-15) unstable; urgency=low
2701 * correctly disable unwanted migrate features (xbzrle).
2703 * QemuMigrate: print migration xbzrle if enabled
2705 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Feb 2014 08:06:29 +0100
2707 qemu-server (3.1-14) unstable; urgency=low
2709 * Add title of VM to Spice Client
2711 * deactivate volume after move_disk
2713 * add cpu_hotplug (and maxcpus config)
2715 * migration : enable auto-converge capability
2717 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Jan 2014 06:49:16 +0100
2719 qemu-server (3.1-13) unstable; urgency=low
2721 * pci passthrough: new option to disable device ROM (rombar=off)
2723 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Dec 2013 11:45:46 +0100
2725 qemu-server (3.1-12) unstable; urgency=low
2727 * spiceproxy: use POST instead of GET
2729 -- Proxmox Support Team <support@proxmox.com> Tue, 10 Dec 2013 10:49:30 +0100
2731 qemu-server (3.1-11) unstable; urgency=low
2733 * depend on pve-qemu-kvm >= 1.7-1
2735 * fix 'qm unlink' command syntax
2737 * add 'pvscsi' to the list of scsi controllers (emulate the VMware
2740 * add 'lsi53c810' to the list of scsi controllers (supported on some
2741 very old Windows NT versions)
2743 * add 'vmxnet3' to the list of available network card models (emulate
2744 VMware paravirtualized network card)
2746 * add drive option 'discard'
2748 * add support for new qemu throttling burst max parameters.
2750 -- Proxmox Support Team <support@proxmox.com> Tue, 03 Dec 2013 10:48:33 +0100
2752 qemu-server (3.1-10) unstable; urgency=low
2754 * add +lahf_lm flag to kvm64 cpudef
2756 -- Proxmox Support Team <support@proxmox.com> Fri, 29 Nov 2013 09:18:39 +0100
2758 qemu-server (3.1-9) unstable; urgency=low
2760 * clone: deactivate volumes after clone to other node
2762 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Nov 2013 08:17:35 +0100
2764 qemu-server (3.1-8) unstable; urgency=low
2766 * clone: correctly check drive options (avoid feature is not available bug)
2768 -- Proxmox Support Team <support@proxmox.com> Mon, 14 Oct 2013 07:36:26 +0200
2770 qemu-server (3.1-7) unstable; urgency=low
2772 * spice: add multi-monitors support
2774 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Oct 2013 09:13:23 +0200
2776 qemu-server (3.1-6) unstable; urgency=low
2778 * use new PVE::Storage::abs_filesystem_path()
2780 * use warnings instead of global -w flag
2782 -- Proxmox Support Team <support@proxmox.com> Tue, 01 Oct 2013 12:42:42 +0200
2784 qemu-server (3.1-5) unstable; urgency=low
2786 * introduce new ostype 'solaris' (run without x2apic).
2788 -- Proxmox Support Team <support@proxmox.com> Tue, 24 Sep 2013 06:55:33 +0200
2790 qemu-server (3.1-4) unstable; urgency=low
2792 * qemu migrate : only wait for spice server online + eval
2794 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Sep 2013 06:29:39 +0200
2796 qemu-server (3.1-3) unstable; urgency=low
2798 * speedup restore on glusterfs (do not write zero bytes)
2800 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Sep 2013 09:13:34 +0200
2802 qemu-server (3.1-2) unstable; urgency=low
2804 * Allow VMAdmin/DatastoreUser to delete disk
2806 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Sep 2013 07:48:07 +0200
2808 qemu-server (3.1-1) unstable; urgency=low
2810 * allow pass through of usb parallel devices (--parallel0 /dev/usb/lp0)
2812 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Aug 2013 12:20:23 +0200
2814 qemu-server (3.0-30) unstable; urgency=low
2816 * fix bugs in migration code (wrong qw() usage)
2818 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Aug 2013 09:49:20 +0200
2820 qemu-server (3.0-29) unstable; urgency=low
2822 * vncproxy: load config from correct node
2824 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Aug 2013 08:15:59 +0200
2826 qemu-server (3.0-28) unstable; urgency=low
2828 * allow to use a socket for serial devices
2830 * implement 'qm terminal' to open terminal via serial device
2832 * add ability to run without graphic card ('vga: serial[n]')
2834 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Aug 2013 10:05:35 +0200
2836 qemu-server (3.0-27) unstable; urgency=low
2838 * add support for unsecure/fast migration (setting in datacenter.cfg)
2840 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Jul 2013 11:24:36 +0200
2842 qemu-server (3.0-26) unstable; urgency=low
2844 * remove spice cert paths (depend on pve-qemu-kvm >= 1.4-16)
2846 * implement spice seamless migration
2848 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Jul 2013 10:08:33 +0200
2850 qemu-server (3.0-25) unstable; urgency=low
2852 * support usb redirection devices for spice (usb[n]: spice)
2854 * disable tablet device by default for spice
2856 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jul 2013 09:38:25 +0200
2858 qemu-server (3.0-24) unstable; urgency=low
2860 * spiceproxy API: allow client to choose proxy address
2862 * spiceproxy API: read cert subject name directly using Net::SSLeay
2864 * spice: use TLS (encrypt whole traffic)
2866 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Jul 2013 08:14:46 +0200
2868 qemu-server (3.0-23) unstable; urgency=low
2870 * allow to pass SCSI generic devices to guests, for example "scsi0: /dev/sg5"
2872 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jul 2013 06:49:45 +0200
2874 qemu-server (3.0-22) unstable; urgency=low
2876 * cpu flags optimization
2878 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Jul 2013 09:14:49 +0200
2880 qemu-server (3.0-21) unstable; urgency=low
2882 * add support for SPICE
2884 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Jun 2013 13:15:48 +0200
2886 qemu-server (3.0-20) unstable; urgency=low
2888 * new API to update VM config: this one is fully asynchronous.
2890 * snapshot rollback: use pc-i440fx-1.4 as default
2892 -- Proxmox Support Team <support@proxmox.com> Fri, 07 Jun 2013 11:44:16 +0200
2894 qemu-server (3.0-19) unstable; urgency=low
2896 * config: implement new 'machine' configuration
2898 * migrate: pass --machine parameter to remote 'qm start' command
2900 * snapshot: store/use 'machine' confifiguration
2902 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Jun 2013 10:27:47 +0200
2904 qemu-server (3.0-18) unstable; urgency=low
2906 * imlement delete flag for move_disk
2908 * API: rename move to move_disk
2910 -- Proxmox Support Team <support@proxmox.com> Fri, 31 May 2013 10:57:50 +0200
2912 qemu-server (3.0-17) unstable; urgency=low
2914 * implement storage migration ("qm move")
2916 -- Proxmox Support Team <support@proxmox.com> Wed, 29 May 2013 13:01:16 +0200
2918 qemu-server (3.0-16) unstable; urgency=low
2920 * fix bug 395: correctly handle unused disk with storage alias
2922 * fix unused disk handling (do not hide unused disks when used with snapshot).
2924 -- Proxmox Support Team <support@proxmox.com> Tue, 28 May 2013 12:23:12 +0200
2926 qemu-server (3.0-15) unstable; urgency=low
2928 * qemu_img_format : use raw for as default for other storage
2930 -- Proxmox Support Team <support@proxmox.com> Thu, 23 May 2013 11:33:47 +0200
2932 qemu-server (3.0-14) unstable; urgency=low
2934 * fix bug #389: avoid error if balloon is undefined
2936 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2013 07:17:38 +0200
2938 qemu-server (3.0-13) unstable; urgency=low
2940 * fix bug #391 - restore: test if requested format is supported
2942 -- Proxmox Support Team <support@proxmox.com> Tue, 21 May 2013 12:03:56 +0200
2944 qemu-server (3.0-12) unstable; urgency=low
2946 * use add_vm_to_pool/remove_vm_from_pool from PVE::AccessControl
2948 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 12:02:41 +0200
2950 qemu-server (3.0-11) unstable; urgency=low
2952 * clone disk : keep source volume params
2954 -- Proxmox Support Team <support@proxmox.com> Tue, 14 May 2013 10:18:21 +0200
2956 qemu-server (3.0-10) unstable; urgency=low
2958 * fix bug #381: use PVE::Tools::next_migrate_port()
2960 * clone: check is we can clone to target storage
2962 -- Proxmox Support Team <support@proxmox.com> Mon, 13 May 2013 07:31:47 +0200
2964 qemu-server (3.0-9) unstable; urgency=low
2966 * restore: do not restore template flag
2968 -- Proxmox Support Team <support@proxmox.com> Wed, 08 May 2013 10:23:49 +0200
2970 qemu-server (3.0-8) unstable; urgency=low
2972 * qemu_img_format: use 'raw' for lvm
2974 * drive-mirror : die if stats are empty
2976 * set long timeout for query-block-jobs
2978 -- Proxmox Support Team <support@proxmox.com> Tue, 07 May 2013 10:19:19 +0200
2980 qemu-server (3.0-7) unstable; urgency=low
2982 * has_feature: return list of allowed nodes
2984 -- Proxmox Support Team <support@proxmox.com> Mon, 06 May 2013 08:58:35 +0200
2986 qemu-server (3.0-6) unstable; urgency=low
2988 * fix bug #379 - restore: allow to overwrite existing VMs if user has
2989 VM.Backup permissions
2991 -- Proxmox Support Team <support@proxmox.com> Fri, 03 May 2013 07:53:40 +0200
2993 qemu-server (3.0-5) unstable; urgency=low
2995 * implement shared file locks
2997 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Apr 2013 11:35:01 +0200
2999 qemu-server (3.0-4) unstable; urgency=low
3001 * fix bug 377: make qm rescan work properly
3003 * avoid endless loop in QMPClient
3005 * use vm create permissions for templates
3007 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Apr 2013 07:59:28 +0200
3009 qemu-server (3.0-3) unstable; urgency=low
3011 * allow sparse restore for sheepdog and rbd
3013 -- Proxmox Support Team <support@proxmox.com> Thu, 18 Apr 2013 06:21:40 +0200
3015 qemu-server (3.0-2) unstable; urgency=low
3017 * fix warnings in syslog
3019 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Mar 2013 06:25:12 +0100
3021 qemu-server (3.0-1) unstable; urgency=low
3023 * start 3.0 development
3025 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Mar 2013 11:39:08 +0100
3027 qemu-server (2.3-17) unstable; urgency=low
3029 * fix backup-cancel timeout
3031 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:58:58 +0100
3033 qemu-server (2.3-16) unstable; urgency=low
3035 * vncproxy (another try): wait max 10s for the socket if it does not
3038 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 06:42:36 +0100
3040 qemu-server (2.3-15) unstable; urgency=low
3042 * revert vncproxy change because it breaks console on remote hosts.
3044 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 12:53:59 +0100
3046 qemu-server (2.3-14) unstable; urgency=low
3048 * bugfix #340 : don't set cache=none to cdrom
3050 * Migrate: fix check if a backing file exist
3052 * vncproxy: wait max 10s for the socket if it does not exist
3054 * vzdump: improve error reporting
3056 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Feb 2013 06:21:30 +0100
3058 qemu-server (2.3-13) unstable; urgency=low
3060 * set cache=none by default
3062 -- Proxmox Support Team <support@proxmox.com> Mon, 25 Feb 2013 06:12:14 +0100
3064 qemu-server (2.3-12) unstable; urgency=low
3066 * disable hotplug by default (revert previous change)
3068 * disable usb2 controller by default (revert previous change)
3070 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Feb 2013 09:52:13 +0100
3072 qemu-server (2.3-11) unstable; urgency=low
3074 * fix backup parameters for pve-qemu-kvm 1.4-4
3076 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Feb 2013 10:47:55 +0100
3078 qemu-server (2.3-10) unstable; urgency=low
3080 * enable hotplug by default
3082 * enable usb2 controller by default
3084 -- Proxmox Support Team <support@proxmox.com> Tue, 19 Feb 2013 10:45:28 +0100
3086 qemu-server (2.3-9) unstable; urgency=low
3088 * depend on pve-qemu-kvm >= 1.4-1
3090 * qemu 1.4 fix : rename stats-polling-interval to
3091 guest-stats-polling-interval
3093 * remove expected_downtime from migration status (not set in qemu 1.4,
3096 * do not set cache=none for .raw files - use qemu default instead
3099 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Feb 2013 10:38:13 +0100
3101 qemu-server (2.3-8) unstable; urgency=low
3103 * fix tar restore: correctly check if VM config already exists
3105 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Jan 2013 09:53:12 +0100
3107 qemu-server (2.3-7) unstable; urgency=low
3109 * allow to suspend/resume VM during backup
3111 -- Proxmox Support Team <support@proxmox.com> Thu, 17 Jan 2013 10:25:17 +0100
3113 qemu-server (2.3-6) unstable; urgency=low
3115 * fix bug #315: cancel backup before stopping the VM
3117 -- Proxmox Support Team <support@proxmox.com> Wed, 16 Jan 2013 13:22:58 +0100
3119 qemu-server (2.3-5) unstable; urgency=low
3121 * fix bug #307: correctly restore disk settings
3123 -- Proxmox Support Team <support@proxmox.com> Mon, 07 Jan 2013 06:48:48 +0100
3125 qemu-server (2.3-4) unstable; urgency=low
3127 * qmrestore vma files: when restoring to same VMID, only remove volumes
3128 contained in backup - other volumes will be still available as
3129 'unused' disks. Note: tar restore still removes all volumes.
3131 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Jan 2013 07:02:00 +0100
3133 qemu-server (2.3-3) unstable; urgency=low
3135 * fix Bug #293: CDROM size not reset when set to use no media
3137 * set migrate_downtime default value to 0.1 (and use float instead of int)
3139 * implement dynamic migration_downtime
3141 * allow manual ballooning if shares is set to zero
3143 * new api2 call: vm_feature (test support for snapshots/clone feature)
3145 -- Proxmox Support Team <support@proxmox.com> Wed, 02 Jan 2013 06:31:38 +0100
3147 qemu-server (2.3-2) unstable; urgency=low
3149 * use memory info from ballon driver (if enabled)
3151 -- Proxmox Support Team <support@proxmox.com> Tue, 18 Dec 2012 12:51:57 +0100
3153 qemu-server (2.3-1) unstable; urgency=low
3155 * include new qemu backup feature
3157 -- Proxmox Support Team <support@proxmox.com> Wed, 12 Dec 2012 15:14:59 +0100
3159 qemu-server (2.0-71) unstable; urgency=low
3161 * show better error message if bridge does not exist
3163 * QMPClient: support fdsets
3165 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Dec 2012 11:17:47 +0100
3167 qemu-server (2.0-70) unstable; urgency=low
3169 * fix version parser for qemu 1.3
3171 * add new cpu types: SandyBridge Haswell Opteron_G4 Opteron_G5
3173 * remove rhel specific cpu types: cpu64-rhel6 cpu64-rhel5
3175 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2012 07:45:19 +0100
3177 qemu-server (2.0-69) unstable; urgency=low
3179 * fix ballon monitor command (use bytes instead of MBs)
3181 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Nov 2012 06:13:46 +0100
3183 qemu-server (2.0-68) unstable; urgency=low
3185 * vzdump: store drive in correct order (sort) to avoid confusion
3187 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Nov 2012 06:25:33 +0100
3189 qemu-server (2.0-67) unstable; urgency=low
3191 * fix allocation size in qmrestore
3193 -- Proxmox Support Team <support@proxmox.com> Sat, 03 Nov 2012 07:54:06 +0100
3195 qemu-server (2.0-66) unstable; urgency=low
3197 * vzdump: restore sata drives correctly
3199 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Nov 2012 07:43:16 +0100
3201 qemu-server (2.0-65) unstable; urgency=low
3203 * remove hardcoded blowfish cipher
3205 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Oct 2012 13:58:27 +0100
3207 qemu-server (2.0-64) unstable; urgency=low
3209 * fix memory leak in QMP Client (many thanks to Stefan!)
3211 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Oct 2012 12:14:51 +0100
3213 qemu-server (2.0-63) unstable; urgency=low
3217 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Oct 2012 10:00:50 +0200
3219 qemu-server (2.0-62) unstable; urgency=low
3221 * vncproxy: wait until vnc port is ready
3223 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Oct 2012 08:58:52 +0200
3225 qemu-server (2.0-61) unstable; urgency=low
3227 * add 'win8' ostype (same defaults as win7 for now)
3229 -- Proxmox Support Team <support@proxmox.com> Tue, 23 Oct 2012 09:35:27 +0200
3231 qemu-server (2.0-60) unstable; urgency=low
3233 * fix bug 258: use bridge mtu for tap interfaces
3235 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Oct 2012 12:26:42 +0200
3237 qemu-server (2.0-59) unstable; urgency=low
3239 * disable vzdump for VM containing snapshots
3241 -- Proxmox Support Team <support@proxmox.com> Thu, 27 Sep 2012 09:41:19 +0200
3243 qemu-server (2.0-58) unstable; urgency=low
3245 * fix bug 251: use new command line syntax
3247 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Sep 2012 12:43:17 +0200
3249 qemu-server (2.0-57) unstable; urgency=low
3251 * fix migrating VMs with snapshots
3253 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Sep 2012 08:12:37 +0200
3255 qemu-server (2.0-56) unstable; urgency=low
3257 * include shanpshot support
3259 -- Proxmox Support Team <support@proxmox.com> Mon, 24 Sep 2012 15:59:40 +0200
3261 qemu-server (2.0-55) unstable; urgency=low
3263 * migrate: disable xbzrle (not stable)
3265 -- Proxmox Support Team <support@proxmox.com> Fri, 31 Aug 2012 11:04:35 +0200
3267 qemu-server (2.0-54) unstable; urgency=low
3269 * use mbps instead of bps
3271 * try to make migrate more stable
3273 -- Proxmox Support Team <support@proxmox.com> Thu, 30 Aug 2012 12:16:39 +0200
3275 qemu-server (2.0-53) unstable; urgency=low
3277 * livemigrate : activate xbzrle cache
3279 * scsihw: add megasas controller
3281 * partly fix bug 247: retry qmp open
3283 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Aug 2012 13:45:18 +0200
3285 qemu-server (2.0-52) unstable; urgency=low
3287 * fix bug 217: stop VM after failed migrate
3289 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Aug 2012 10:33:57 +0200
3291 qemu-server (2.0-51) unstable; urgency=low
3293 * support up to 32 network devices
3295 * support up to 16 virtio devices
3297 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Aug 2012 10:06:39 +0200
3299 qemu-server (2.0-50) unstable; urgency=low
3301 * implement 'qm rescan' to update disk sizes and unused disk info
3303 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Aug 2012 09:22:29 +0200
3305 qemu-server (2.0-49) unstable; urgency=low
3307 * fix bug 242: re-add old monitor code
3309 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Aug 2012 10:33:37 +0200
3311 qemu-server (2.0-48) unstable; urgency=low
3313 * add size hint to drive options
3315 * new 'qm resize' command
3317 -- Proxmox Support Team <support@proxmox.com> Tue, 14 Aug 2012 06:55:39 +0200
3319 qemu-server (2.0-47) unstable; urgency=low
3321 * implement virtio-scsi-pci controller
3323 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Aug 2012 08:57:52 +0200
3325 qemu-server (2.0-46) unstable; urgency=low
3327 * bug fix: allow to set devices directly (-ide1 /dev/XYZ)
3329 -- Proxmox Support Team <support@proxmox.com> Fri, 27 Jul 2012 11:59:14 +0200
3331 qemu-server (2.0-45) unstable; urgency=low
3333 * migrate: only scan available storages
3335 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 10:18:22 +0200
3337 qemu-server (2.0-44) unstable; urgency=low
3339 * migrate: only scan necessary storage for unused volumes
3341 -- Proxmox Support Team <support@proxmox.com> Mon, 16 Jul 2012 06:59:23 +0200
3343 qemu-server (2.0-43) unstable; urgency=low
3345 * use new QMPClient code
3347 -- Proxmox Support Team <support@proxmox.com> Fri, 13 Jul 2012 07:05:28 +0200
3349 qemu-server (2.0-42) unstable; urgency=low
3351 * fix pool permission checks on create
3353 -- Proxmox Support Team <support@proxmox.com> Wed, 30 May 2012 10:13:11 +0200
3355 qemu-server (2.0-41) unstable; urgency=low
3357 * more fixes for newer pve-storage versions
3359 -- Proxmox Support Team <support@proxmox.com> Thu, 24 May 2012 07:24:00 +0200
3361 qemu-server (2.0-40) unstable; urgency=low
3363 * minor fixes for newer pve-storage versions
3365 -- Proxmox Support Team <support@proxmox.com> Wed, 23 May 2012 07:23:31 +0200
3367 qemu-server (2.0-39) unstable; urgency=low
3369 * new startup option to define startup order.
3371 * do not start VMs with /etc/init.d/qemu-server. This is now
3372 done with /etc/init.d/pve-manager
3374 * qm: removed startall/stopall commands
3376 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Apr 2012 14:26:04 +0200
3378 qemu-server (2.0-38) unstable; urgency=low
3380 * add directsync cache mode
3382 * fix bug #147: allow to set migrate_downtime to 0
3384 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Apr 2012 08:51:56 +0200
3386 qemu-server (2.0-37) unstable; urgency=low
3388 * fix bug in storage availability check (migrate)
3390 -- Proxmox Support Team <support@proxmox.com> Sat, 07 Apr 2012 08:25:59 +0200
3392 qemu-server (2.0-36) unstable; urgency=low
3394 * use '-no-kvm-pit-reinjection -no-hpet' for win7 and w2k8 guests.
3396 -- Proxmox Support Team <support@proxmox.com> Thu, 05 Apr 2012 12:34:00 +0200
3398 qemu-server (2.0-35) unstable; urgency=low
3400 * fix bug #134: allow to pass file names to qmrestore and 'qm set'
3402 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Apr 2012 10:51:41 +0200
3404 qemu-server (2.0-34) unstable; urgency=low
3406 * fix bug #12: check storage availability early (migrate)
3408 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Mar 2012 09:12:46 +0200
3410 qemu-server (2.0-33) unstable; urgency=low
3412 * fix bug #121: activate volumes correctly
3414 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 11:09:36 +0200
3416 qemu-server (2.0-32) unstable; urgency=low
3418 * fix usb host syntax (correctly pass hexadecimal numbers with prefix
3421 * document rerror/werror options
3423 -- Proxmox Support Team <support@proxmox.com> Thu, 29 Mar 2012 07:11:51 +0200
3425 qemu-server (2.0-31) unstable; urgency=low
3427 * use new network setup code from PVE::Network (libpve-common-perl)
3429 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Mar 2012 10:39:12 +0200
3431 qemu-server (2.0-30) unstable; urgency=low
3435 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 12:20:33 +0200
3437 qemu-server (2.0-29) unstable; urgency=low
3439 * fix bug #97: execute 'clusvcadm' commands for HA managed VMs
3441 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Mar 2012 10:36:23 +0200
3443 qemu-server (2.0-28) unstable; urgency=low
3445 * use Digest::SHA instead of Digest::SHA1
3447 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 12:24:01 +0100
3449 qemu-server (2.0-27) unstable; urgency=low
3451 * make startall wait up to 10 seconds for quorum
3453 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 09:32:53 +0100
3455 qemu-server (2.0-26) unstable; urgency=low
3457 * fix bug 109: use scsi inquiry to test if we can use the scsi-block
3460 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Mar 2012 10:39:30 +0100
3462 qemu-server (2.0-25) unstable; urgency=low
3464 * fix bug 102: remove stale status file on stop
3466 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 12:53:32 +0100
3468 qemu-server (2.0-24) unstable; urgency=low
3470 * save description as comment.
3472 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 08:12:29 +0100
3474 qemu-server (2.0-23) unstable; urgency=low
3476 * fix lvremove call: avoid 'Not a CODE reference' warning
3478 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 06:36:33 +0100
3480 qemu-server (2.0-22) unstable; urgency=low
3482 * revert tablet mice fix - does not work reliable
3484 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 09:45:30 +0100
3486 qemu-server (2.0-21) unstable; urgency=low
3488 * fix tablet mice as default when live migrate
3490 -- Proxmox Support Team <support@proxmox.com> Wed, 29 Feb 2012 06:51:09 +0100
3492 qemu-server (2.0-20) unstable; urgency=low
3494 * fix bug 96: fix vzdump on stopped vm
3496 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Feb 2012 07:38:45 +0100
3498 qemu-server (2.0-19) unstable; urgency=low
3500 * support more CPU models
3502 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Feb 2012 07:18:53 +0100
3504 qemu-server (2.0-18) unstable; urgency=low
3506 * fix cdrom (/dev/cdrom) permission check
3508 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Feb 2012 07:16:36 +0100
3510 qemu-server (2.0-17) unstable; urgency=low
3512 * fix cdrom removal bug
3514 -- Proxmox Support Team <support@proxmox.com> Wed, 15 Feb 2012 10:48:30 +0100
3516 qemu-server (2.0-16) unstable; urgency=low
3518 * ignore -tdf (avoid kvm warning) - this is no longer needed
3520 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Feb 2012 11:18:01 +0100
3522 qemu-server (2.0-15) unstable; urgency=low
3524 * online migration fix: close tunnel later, wait for connection close
3526 * fix bug #81: do no deactivate volumes in vzdump stop mode
3528 -- Proxmox Support Team <support@proxmox.com> Tue, 17 Jan 2012 11:24:56 +0100
3530 qemu-server (2.0-14) unstable; urgency=low
3532 * use 'da' instead of 'dk' for Danish keyboard (qemu use that name)
3534 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Jan 2012 11:24:40 +0100
3536 qemu-server (2.0-13) unstable; urgency=low
3538 * load vhost_net module
3540 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Dec 2011 12:25:22 +0100
3542 qemu-server (2.0-12) unstable; urgency=low
3544 * implement forceStop option for shutdown
3546 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2011 12:58:00 +0100
3548 qemu-server (2.0-11) unstable; urgency=low
3550 * do not use ehci by default
3552 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Dec 2011 10:26:36 +0100
3554 qemu-server (2.0-10) unstable; urgency=low
3556 * set qm exit codes currectly
3558 * fix 'qm shutdown <vmid>'
3560 -- Proxmox Support Team <support@proxmox.com> Wed, 30 Nov 2011 09:35:43 +0100
3562 qemu-server (2.0-9) unstable; urgency=low
3566 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 11:14:01 +0100
3568 qemu-server (2.0-8) unstable; urgency=low
3570 * be more careful when removing snapshots
3572 * do not call check_lock() for sendkey
3574 * try to detect errors before starting the background task
3576 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2011 08:08:44 +0100
3578 qemu-server (2.0-7) unstable; urgency=low
3580 * activate/deactivate LVs more carefully
3582 * avoid syslog whenever possible
3586 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Nov 2011 08:08:04 +0100
3588 qemu-server (2.0-6) unstable; urgency=low
3590 * set correct migrate speed
3592 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2011 09:12:12 +0100
3594 qemu-server (2.0-5) unstable; urgency=low
3596 * fix vzdump stop mode
3598 -- Proxmox Support Team <support@proxmox.com> Mon, 21 Nov 2011 06:38:03 +0100
3600 qemu-server (2.0-4) unstable; urgency=low
3604 -- Proxmox Support Team <support@proxmox.com> Sat, 19 Nov 2011 09:54:19 +0100
3606 qemu-server (2.0-3) unstable; urgency=low
3608 * implement monitor API
3610 * implement qmrestore
3612 * fix vzdump plugin for 2.0
3614 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Nov 2011 11:35:58 +0100
3616 qemu-server (2.0-2) unstable; urgency=low
3620 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2011 10:15:37 +0200
3622 qemu-server (2.0-1) unstable; urgency=low
3624 * see Changelog for details
3626 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Aug 2010 13:48:12 +0200
3628 qemu-server (1.1-18) unstable; urgency=low
3630 * small bug fix im qmigrate
3632 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Aug 2010 08:05:21 +0200
3634 qemu-server (1.1-17) unstable; urgency=low
3636 * carefully catch write errors
3638 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Jul 2010 09:00:48 +0200
3640 qemu-server (1.1-16) unstable; urgency=low
3642 * add rerror/werror options (patch from l.mierzwa)
3644 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Jun 2010 08:49:00 +0200
3646 qemu-server (1.1-15) unstable; urgency=low
3648 * fix vmtar bug (endless growing archive)
3650 -- Proxmox Support Team <support@proxmox.com> Fri, 25 Jun 2010 12:22:17 +0200
3652 qemu-server (1.1-14) unstable; urgency=low
3654 * correct order of config option (prevent virtio reordering)
3656 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Apr 2010 09:05:15 +0200
3658 qemu-server (1.1-13) unstable; urgency=low
3660 * allow vlan1-to vlan4094 (Since 802.1q allows VLAN identifiers up to 4094).
3662 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Apr 2010 10:19:37 +0200
3664 qemu-server (1.1-12) unstable; urgency=low
3666 * minor fixes for new qemu-kvm 0.12.3
3668 -- Proxmox Support Team <support@proxmox.com> Fri, 16 Apr 2010 12:01:17 +0200
3670 qemu-server (1.1-11) unstable; urgency=low
3672 * experimental support for pci pass-through (option 'hostpci')
3674 -- Proxmox Support Team <support@proxmox.com> Fri, 08 Jan 2010 13:03:44 +0100
3676 qemu-server (1.1-10) unstable; urgency=low
3678 * add compatibility code for older kvm versions (0.9)
3680 * only use fairsched when the kernel has openvz support
3682 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 15:17:18 +0100
3684 qemu-server (1.1-9) unstable; urgency=low
3686 * always display boot menu (Press F12...)
3688 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Oct 2009 10:28:23 +0100
3690 qemu-server (1.1-8) unstable; urgency=low
3692 * fix 'stopall' timeout
3694 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Oct 2009 12:55:23 +0200
3696 qemu-server (1.1-7) unstable; urgency=low
3698 * do not set fairsched --id when using virtio
3700 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Oct 2009 11:57:57 +0200
3702 qemu-server (1.1-6) unstable; urgency=low
3704 * disable fairsched when option 'cpuunits' is set to 0 (zero)
3706 * disable fairsched when the VM uses virtio devices.
3708 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Oct 2009 15:06:48 +0200
3710 qemu-server (1.1-5) unstable; urgency=low
3712 * suppress syslog when setting migrate downtime/speed
3714 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2009 10:10:55 +0200
3716 qemu-server (1.1-4) unstable; urgency=low
3718 * depend on stable pve-qemu-kvm
3720 * new migrate_speed and migrate_downtime settings
3722 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Sep 2009 11:18:08 +0200
3724 qemu-server (1.1-3) unstable; urgency=low
3726 * support up to 1000 vlans
3728 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:35 +0200
3730 qemu-server (1.1-2) unstable; urgency=low
3732 * introduce new 'sockets' and 'cores' settings
3734 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Sep 2009 09:54:18 +0200
3736 qemu-server (1.1-1) unstable; urgency=low
3738 * use new pve-storage framework
3740 * delete unused disk on destroy
3742 * fix cache= option (none|writethrough|writeback)
3744 * use rtc-td-hack for windows when acpi is enabled
3746 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jun 2009 08:49:53 +0200
3748 qemu-server (1.0-14) unstable; urgency=low
3750 * add new tablet option (to disable --usbdevice tablet, which generate
3751 many interrupts, which is bad when you run many VMs) (Patch was
3752 provided by Tomasz Chmielewski)
3754 -- Proxmox Support Team <support@proxmox.com> Wed, 27 May 2009 12:50:45 +0200
3756 qemu-server (1.0-13) unstable; urgency=low
3758 * Conflict with netcat-openbsd
3760 -- Proxmox Support Team <support@proxmox.com> Wed, 13 May 2009 10:20:54 +0200
3762 qemu-server (1.0-12) unstable; urgency=low
3764 * fixes for debian lenny
3766 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Apr 2009 14:28:42 +0200
3768 qemu-server (1.0-11) unstable; urgency=low
3770 * allow white spaces inside args - use normal shell quoting
3772 -- Proxmox Support Team <support@proxmox.com> Thu, 26 Feb 2009 11:31:36 +0100
3774 qemu-server (1.0-10) unstable; urgency=low
3778 * bug fix for 'lost description'
3780 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Feb 2009 08:18:29 +0100
3782 qemu-server (1.0-9) unstable; urgency=low
3784 * add 'parallel' option
3786 * add 'startdate' option
3790 -- Proxmox Support Team <support@proxmox.com> Mon, 2 Feb 2009 08:53:26 +0100
3792 qemu-server (1.0-8) unstable; urgency=low
3794 * add 'serial' option
3796 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Jan 2009 08:52:24 +0100
3798 qemu-server (1.0-7) unstable; urgency=low
3800 * use new systax for kvm vga option (needed for kvm newer than kvm77)
3802 -- Proxmox Support Team <support@proxmox.com> Wed, 7 Jan 2009 14:46:09 +0100
3804 qemu-server (1.0-6) unstable; urgency=low
3806 * use predefined names for tap devices
3808 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Dec 2008 13:00:44 +0100
3810 qemu-server (1.0-5) unstable; urgency=low
3812 * added host usb device support
3814 -- Proxmox Support Team <support@proxmox.com> Mon, 17 Nov 2008 11:26:04 +0100
3816 qemu-server (1.0-4) unstable; urgency=low
3818 * fix status problem
3820 -- Proxmox Support Team <support@proxmox.com> Thu, 13 Nov 2008 13:13:43 +0100
3822 qemu-server (1.0-3) unstable; urgency=low
3826 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Nov 2008 08:29:23 +0100
3828 qemu-server (1.0-1) unstable; urgency=low
3830 * update for kvm-75, support vm migration
3832 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Oct 2008 11:04:03 +0200
3834 qemu-server (0.9) unstable; urgency=low
3838 -- Proxmox Support Team <support@proxmox.com> Mon, 4 Feb 2008 09:10:13 +0100