Don't skip the vmcall() in l2_guest_code() prior to re-entering L2, doing
so will result in L2 running to completion, popping '0' off the stack for
RET, jumping to address '0', and ultimately dying with a triple fault
shutdown.
It's not at all obvious why the test re-enters L2 and re-executes VMCALL,
but presumably it serves a purpose. The VMX path doesn't skip vmcall(),
and the test can't possibly have passed on SVM, so just do what VMX does.
Fixes: d951b2210c1a ("KVM: selftests: smm_test: Test SMM enter from L2") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220125221725.2101126-1-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fixes: 9bb7b689274b ("drm/ast: Support 1600x900 with 108MHz PCLK") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220120040527.552068-1-airlied@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current implementation of HTB offload doesn't support some
parameters. Instead of ignoring them, actively return the EINVAL error
when they are set to non-defaults.
As this patch goes to stable, the driver API is not changed here. If
future drivers support more offload parameters, the checks can be moved
to the driver side.
Note that the buffer and cbuffer parameters are also not supported, but
the tc userspace tool assigns some default values derived from rate and
ceil, and identifying these defaults in sch_htb would be unreliable, so
they are still ignored.
Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220125100654.424570-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since some interrupt states may be cleared by hardware, the driver
may receive an empty interrupt. Currently, the VF driver directly
disables the vector0 interrupt in this case. As a result, the VF
is unavailable. Therefore, the vector0 interrupt should be enabled
in this case.
Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The cpsw driver didn't properly initialise the struct page_pool_params
before calling page_pool_create(), which leads to crashes after the struct
has been expanded with new parameters.
The second Fixes tag below is where the buggy code was introduced, but
because the code was moved around this patch will only apply on top of the
commit in the first Fixes tag.
Fixes: c5013ac1dd0e ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv") Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Reported-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fixes: 0781168e23a2 ("yam: fix a missing-check bug") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The function performs a check on the "ctx" input parameter, however, it
is used before the check.
Initialize the "base" variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 4259ff7ae509e ("drm/msm/dpu: add support for pcc color block in dpu driver")
Addresses-Coverity-ID: 1493866 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220109192431.135949-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e00012b256d4 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There
are no further registers in the tcan4x5x making 0x87fc the biggest
addressable register.
This patch fixes the max register value of the regmap config from
0x8ffc to 0x87fc.
Fixes: 6e1caaf8ed22 ("can: tcan4x5x: fix max register value") Link: https://lore.kernel.org/all/20220119064011.2943292-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In the WIN10 version of the Synthetic Video protocol with Hyper-V,
Hyper-V reports a list of supported resolutions as part of the protocol
negotiation. The driver calculates the maximum width and height from
the list of resolutions, and uses those maximums to validate any screen
resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of
supported resolutions could contain 1600x1200 and 1920x1080, both of
which fit in an 8 Mbyte frame buffer. But calculating the max width
and height yields 1920 and 1200, and 1920x1200 resolution does not fit
in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted,
causing a kernel fault when the driver accesses memory outside the
frame buffer.
Instead, validate the specified screen resolution by calculating
its size, and comparing against the frame buffer size. Delete the
code for calculating the max width and height from the list of
resolutions, since these max values have no use. Also add the
frame buffer size to the info message to aid in understanding why
a resolution might be rejected.
Fixes: 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/1642360711-2335-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This patch tries to fix it by holding clcsock_release_lock and
checking whether clcsock has already been released before access.
In case that a crash of the same reason happens in smc_getsockopt()
or smc_switch_to_fallback(), this patch also checkes smc->clcsock
in them too. And the caller of smc_switch_to_fallback() will identify
whether fallback succeeds according to the return value.
Fixes: fd57770dd198 ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
ibmvnic_tasklet() continuously spins waiting for responses to all
capability requests. It does this to avoid encountering an error
during initialization of the vnic. However if there is a bug in the
VIOS and we do not receive a response to one or more queries the
tasklet ends up spinning continuously leading to hard lock ups.
If we fail to receive a message from the VIOS it is reasonable to
timeout the login attempt rather than spin indefinitely in the tasklet.
Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should
send out the next protocol message type. i.e when we get back responses
to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs.
Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we
send out the QUERY_IP_OFFLOAD CRQ.
We currently increment ->running_cap_crqs as we send out each CRQ and
have the ibmvnic_tasklet() send out the next message type, when this
running_cap_crqs count drops to 0.
This assumes that all the CRQs of the current type were sent out before
the count drops to 0. However it is possible that we send out say 6 CRQs,
get preempted and receive all the 6 responses before we send out the
remaining CRQs. This can result in ->running_cap_crqs count dropping to
zero before all messages of the current type were sent and we end up
sending the next protocol message too early.
Instead initialize the ->running_cap_crqs upfront so the tasklet will
only send the next protocol message after all responses are received.
Use the cap_reqs local variable to also detect any discrepancy (either
now or in future) in the number of capability requests we actually send.
Currently only send_query_cap() is affected by this behavior (of sending
next message early) since it is called from the worker thread (during
reset) and from application thread (during ->ndo_open()) and they can be
preempted. send_request_cap() is only called from the tasklet which
processes CRQ responses sequentially, is not be affected. But to
maintain the existing symmtery with send_query_capability() we update
send_request_capability() also.
Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If auto-priority-failover (APF) is enabled and there are at least two
backing devices of different priorities, some resets like fail-over,
change-param etc can cause at least two back to back failovers. (Failover
from high priority backing device to lower priority one and then back
to the higher priority one if that is still functional).
Depending on the timimg of the two failovers it is possible to trigger
a "hard" reset and for the hard reset to fail due to failovers. When this
occurs, the driver assumes that the network is unstable and disables the
VNIC for a 60-second "settling time". This in turn can cause the ethtool
command to fail with "No such device" while the vnic automatically recovers
a little while later.
Given that it's possible to have two back to back failures, allow for extra
failures before disabling the vnic for the settling time.
Fixes: f15fde9d47b8 ("ibmvnic: delay next reset if hard reset fails") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
During IP fragmentation we sanitize IP options. This means overwriting
options which should not be copied with NOPs. Only the first fragment
has the original, full options.
ip_fraglist_prepare() copies the IP header and options from previous
fragment to the next one. Commit 19c3401a917b ("net: ipv4: place control
buffer handling away from fragmentation iterators") moved sanitizing
options before ip_fraglist_prepare() which means options are sanitized
and then overwritten again with the old values.
Fixing this is not enough, however, nor did the sanitization work
prior to aforementioned commit.
ip_options_fragment() (which does the sanitization) uses ipcb->opt.optlen
for the length of the options. ipcb->opt of fragments is not populated
(it's 0), only the head skb has the state properly built. So even when
called at the right time ip_options_fragment() does nothing. This seems
to date back all the way to v2.5.44 when the fast path for pre-fragmented
skbs had been introduced. Prior to that ip_options_build() would have been
called for every fragment (in fact ever since v2.5.44 the fragmentation
handing in ip_options_build() has been dead code, I'll clean it up in
-next).
In the original patch (see Link) caixf mentions fixing the handling
for fragments other than the second one, but I'm not sure how _any_
fragment could have had their options sanitized with the code
as it stood.
Tested with python (MTU on lo lowered to 1000 to force fragmentation):
IP (tos 0x0, ttl 64, id 1053, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256))
localhost.36500 > localhost.search-agent: UDP, length 2000
IP (tos 0x0, ttl 64, id 1053, offset 968, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256))
localhost > localhost: udp
IP (tos 0x0, ttl 64, id 1053, offset 1936, flags [none], proto UDP (17), length 100, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256))
localhost > localhost: udp
After:
IP (tos 0x0, ttl 96, id 42549, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256))
localhost.51607 > localhost.search-agent: UDP, bad length 2000 > 960
IP (tos 0x0, ttl 96, id 42549, offset 968, flags [+], proto UDP (17), length 996, options (NOP,NOP,NOP,NOP,RA value 256))
localhost > localhost: udp
IP (tos 0x0, ttl 96, id 42549, offset 1936, flags [none], proto UDP (17), length 100, options (NOP,NOP,NOP,NOP,RA value 256))
localhost > localhost: udp
RA (20 | 0x80) is now copied as expected, RR (7) is "NOPed out".
Link: https://lore.kernel.org/netdev/20220107080559.122713-1-ooppublic@163.com/ Fixes: 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: caixf <ooppublic@163.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The warning indicates that MSR_EE being set(interrupt enabled) when
there was an overflown PMC detected. This could happen in
power_pmu_disable since it runs under interrupt soft disable
condition ( local_irq_save ) and not with interrupts hard disabled.
commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") intended to clear
PMI pending bit in Paca when disabling the PMU. It could happen
that PMC gets overflown while code is in power_pmu_disable
callback function. Hence add a check to see if PMI pending bit
is set in Paca before clearing it via clear_pmi_pending.
Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122033429.25395-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The "val" variable is controlled by the user and comes from
hwmon_attr_store(). The FAN_RPM_TO_PERIOD() macro divides by "val"
so a zero will crash the system. Check for that and return -EINVAL.
Negatives are also invalid so return -EINVAL for those too.
Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If alert handling is broken, interrupts are disabled after an alert and
re-enabled after the alert clears. However, if there is an interrupt
handler, this does not apply if alerts were originally disabled and enabled
when the driver was loaded. In that case, interrupts will stay disabled
after an alert was handled though the alert handler even after the alert
condition clears. Address the situation by always re-enabling interrupts
after the alert condition clears if there is an interrupt handler.
Commit adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V
out of the ring buffer") introduced a notion of maximum packet size in
vmbus channel and used that size to initialize a buffer holding all
incoming packet along with their vmbus packet header. hv_balloon uses
the default maximum packet size VMBUS_DEFAULT_MAX_PKT_SIZE which matches
its maximum message size, however vmbus_open expects this size to also
include vmbus packet header. This leads to 4096 bytes
dm_unballoon_request messages being truncated to 4080 bytes. When the
driver tries to read next packet it starts from a wrong read_index,
receives garbage and prints a lot of "Unhandled message: type:
<garbage>" in dmesg.
Allocate the buffer with HV_HYP_PAGE_SIZE more bytes to make room for
the header.
Fixes: adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer") Suggested-by: Michael Kelley (LINUX) <mikelley@microsoft.com> Suggested-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Yanming Liu <yanminglr@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20220119202052.3006981-1-yanminglr@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In some cases io_rsrc_ref_quiesce will call io_rsrc_node_switch_start,
and then immediately flush the delayed work queue &ctx->rsrc_put_work.
However the percpu_ref_put does not immediately destroy the node, it
will be called asynchronously via RCU. That ends up with
io_rsrc_node_ref_zero only being called after rsrc_put_work has been
flushed, and so the process ends up sleeping for 1 second unnecessarily.
This patch executes the put code immediately if we are busy
quiescing.
Fixes: 4a38aed2a0a7 ("io_uring: batch reap of dead file registrations") Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220121123856.3557884-1-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
EFI_KIMG_ALIGN is defined as: (SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN :
THREAD_ALIGN)
So it depends on THREAD_ALIGN. On newer builds this message started to appear
even though the loader is taking into account the PE header (which is stating
SEGMENT_ALIGN).
Fixes: c32ac11da3f8 ("efi/libstub: arm64: Double check image alignment at entry") Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Improve retransmission backoff by only backing off when we retransmit data
packets rather than when we set the lost ack timer.
To this end:
(1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the
retransmission timer and only tell it that we are retransmitting if we
actually have things to retransmit.
Note that it's possible for the retransmission algorithm to race with
the processing of a received ACK, so we may see no packets needing
retransmission.
(2) In rxrpc_send_data_packet(), don't bump the backoff when setting the
ack_lost_at timer, as it may then get bumped twice.
With this, when looking at one particular packet, the retransmission
intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms,
136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s.
Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/164138117069.2023386.17446904856843997127.stgit@warthog.procyon.org.uk/ Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
PF forwards its VF messages to AF and corresponding
replies from AF to VF. AF sets proper error code in the
replies after processing message requests. Currently PF
checks the error codes in replies and sends invalid
message to VF. This way VF lacks the information of
error code set by AF for its messages. This patch
changes that such that PF simply forwards AF replies
so that VF can handle error codes.
Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It's been observed that sometimes link credit restore takes
a lot of time than the current timeout. This patch increases
the default timeout value and return the proper error value
on failure.
Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
As per HW errata AQ modification to CQ could be discarded on heavy
traffic. This patch implements workaround for the same after each
CQ write by AQ check whether the requested fields (except those
which HW can update eg: avg_level) are properly updated or not.
If CQ context is not updated then perform AQ write again.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
While freeing SQB pointers to aura, driver first memcpy to
target address and then triggers lmtst operation to free pointer
to the aura. We need to ensure(by adding dmb barrier)that memcpy
is finished before pointers are freed to the aura. This patch also
adds the missing sq context structure entry in debugfs.
Fixes: ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Few RVU blocks like SSO require more time for reset on some
silicons. Hence retrying the block reset until success.
Fixes: c0fa2cff8822c ("octeontx2-af: Handle return value in block reset") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In rvu_nix_get_bpid() lbk_bpid_cnt is being read from
wrong register. Due to this backpressure enable is failing
for LBK VF32 onwards. This patch fixes that.
Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
AF modifies all the rules destined for VF to use
the action same as default RSS action. This fixup
was needed because AF only installs default rules with
RSS action. But the action in rules installed by a PF
for its VFs should not be changed by this fixup.
This is because action can be drop or direct to
queue as specified by user(ntuple filters).
This patch fixes that problem.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which
is a 1 Gbps copper module operating in SGMII mode with an internal
BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the
module would work properly on the initial insertion or boot of the
device, but after the device was rebooted, the link would either only
come up at 100 Mbps speeds or go up and down erratically.
I found no meaningful changes in the PHY configuration registers between
the working and non-working boots, but the status registers seemed to
have a lot of error indications set on the SERDES side of the device on
the non-working boot. I suspect the problem is that whatever happens on
the SGMII link when the device is rebooted and the FPGA logic gets
reloaded ends up putting the module's onboard PHY into a bad state.
Since commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
the genphy_soft_reset call is not made automatically by the PHY core
unless the callback is explicitly specified in the driver structure. For
most of these Broadcom devices, there is probably a hardware reset that
gets asserted to reset the PHY during boot, however for SFP modules
(where the BCM54616S is commonly found) no such reset line exists, so if
the board keeps the SFP cage powered up across a reboot, it will end up
with no reset occurring during reboots.
Hook up the genphy_soft_reset callback for BCM54616S to ensure that a
PHY reset is performed before the device is initialized. This appears to
fix the issue with erratic operation after a reboot with this SFP
module.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Rick reported performance regressions in bugzilla because of cpu frequency
being lower than before:
https://bugzilla.kernel.org/show_bug.cgi?id=215045
He bisected the problem to:
commit 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent")
This commit forces util_sum to be synced with the new util_avg after
removing the contribution of a task and before the next periodic sync. By
doing so util_sum is rounded to its lower bound and might lost up to
LOAD_AVG_MAX-1 of accumulated contribution which has not yet been
reflected in util_avg.
Instead of always setting util_sum to the low bound of util_avg, which can
significantly lower the utilization of root cfs_rq after propagating the
change down into the hierarchy, we revert the change of util_sum and
propagate the difference.
In addition, we also check that cfs's util_sum always stays above the
lower bound for a given util_avg as it has been observed that
sched_entity's util_sum is sometimes above cfs one.
Fixes: 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent") Reported-by: Rick Yiu <rickyiu@google.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lkml.kernel.org/r/20220111134659.24961-2-vincent.guittot@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Time readers that cannot take locks (due to NMI etc..) currently make
use of perf_event::shadow_ctx_time, which, for that event gives:
time' = now + (time - timestamp)
or, alternatively arranged:
time' = time + (now - timestamp)
IOW, the progression of time since the last time the shadow_ctx_time
was updated.
There's problems with this:
A) the shadow_ctx_time is per-event, even though the ctx_time it
reflects is obviously per context. The direct concequence of this
is that the context needs to iterate all events all the time to
keep the shadow_ctx_time in sync.
B) even with the prior point, the context itself might not be active
meaning its time should not advance to begin with.
C) shadow_ctx_time isn't consistently updated when ctx_time is
There are 3 users of this stuff, that suffer differently from this:
- calc_timer_values()
- perf_output_read()
- perf_event_update_userpage() /* A */
- perf_event_read_local() /* A,B */
In particular, perf_output_read() doesn't suffer at all, because it's
sample driven and hence only relevant when the event is actually
running.
This same was supposed to be true for perf_event_update_userpage(),
after all self-monitoring implies the context is active *HOWEVER*, as
per commit f79256532682 ("perf/core: fix userpage->time_enabled of
inactive events") this goes wrong when combined with counter
overcommit, in that case those events that do not get scheduled when
the context becomes active (task events typically) miss out on the
EVENT_TIME update and ENABLED time is inflated (for a little while)
with the time the context was inactive. Once the event gets rotated
in, this gets corrected, leading to a non-monotonic timeflow.
perf_event_read_local() made things even worse, it can request time at
any point, suffering all the problems perf_event_update_userpage()
does and more. Because while perf_event_update_userpage() is limited
by the context being active, perf_event_read_local() users have no
such constraint.
Therefore, completely overhaul things and do away with
perf_event::shadow_ctx_time. Instead have regular context time updates
keep track of this offset directly and provide perf_event_time_now()
to complement perf_event_time().
perf_event_time_now() will, in adition to being context wide, also
take into account if the context is active. For inactive context, it
will not advance time.
This latter property means the cgroup perf_cgroup_info context needs
to grow addition state to track this.
Additionally, since all this is strictly per-cpu, we can use barrier()
to order context activity vs context time.
Fixes: 7d9285e82db5 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Song Liu <song@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against
SRR0") masked off the low 2 bits of the NIP value in the interrupt
stack frame in case they are non-zero and mis-compare against a SRR0
register value of a CPU which always reads back 0 from the 2 low bits
which are reserved.
This now causes the opposite problem that an implementation which does
implement those bits in SRR0 will mis-compare against the masked NIP
value in which they have been cleared. QEMU is one such implementation,
and this is allowed by the architecture.
This can be triggered by sigfuz by setting low bits of PT_NIP in the
signal context.
Fix this for now by masking the SRR0 bits as well. Cleaner is probably
to sanitise these values before putting them in registers or stack, but
this is the quick and backportable fix.
Fixes: 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against SRR0") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220117134403.2995059-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The illegal instruction turned out to be 'ldbrx' emitted for
BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of
the same and implement an alternative approach for older processors.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fixes: e26d9972720e ("SUNRPC: Clean up scheduling of autoclose") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Renaming a file is required by POSIX to update the file ctime, so
ensure that the file data is synced to disk so that we don't clobber the
updated ctime by writing back after creating the hard link.
Fixes: f2c2c552f119 ("NFS: Move delegation recall into the NFSv4 callback for rename_setup()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Creating a hard link is required by POSIX to update the file ctime, so
ensure that the file data is synced to disk so that we don't clobber the
updated ctime by writing back after creating the hard link.
Fixes: 9f7682728728 ("NFS: Move the delegation return down into nfs4_proc_link()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
The Fixes tag I chose is probably arbitrary, I do not think
we need to backport this patch to older kernels.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220120174112.1126644-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
After commit:7866a621043f ("dev: add per net_device packet type chains"),
we can not get packet types that are bound to a specified net device by
/proc/net/ptype, this patch fix the regression.
Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch:
Before:
[root@localhost ~]# cat /proc/net/ptype
Type Device Function
0800 ip_rcv
0806 arp_rcv
86dd ipv6_rcv
After:
[root@localhost ~]# cat /proc/net/ptype
Type Device Function
ALL ens192 tpacket_rcv
0800 ip_rcv
0806 arp_rcv
86dd ipv6_rcv
v1 -> v2:
- fix the regression rather than adding new /proc API as
suggested by Stephen Hemminger.
Fixes: 7866a621043f ("dev: add per net_device packet type chains") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If the application sets the O_DIRECTORY flag, and tries to open a
regular file, nfs_atomic_open() will punt to doing a regular lookup.
If the server then returns a regular file, we will happily return a
file descriptor with uninitialised open state.
The fix is to return the expected ENOTDIR error in these cases.
Reported-by: Lyu Tao <tao.lyu@epfl.ch> Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.
Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
ip_select_ident_segs() has been very conservative about using
the connected socket private generator only for packets with IP_DF
set, claiming it was needed for some VJ compression implementations.
As mentioned in this referenced document, this can be abused.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)
Before switching to pure random IPID generation and possibly hurt
some workloads, lets use the private inet socket generator.
Not only this will remove one vulnerability, this will also
improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT
Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reported-by: Ray Che <xijiache@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When 'ping' changes to use PING socket instead of RAW socket by:
# sysctl -w net.ipv4.ping_group_range="0 100"
the selftests 'router_broadcast.sh' will fail, as such command
# ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b
can't receive the response skb by the PING socket. It's caused by mismatch
of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket,
as dif is vrf-h1 if dif's master was set to vrf-h1.
This patch is to fix this regression by also checking the sk_bound_dev_if
against sdif so that the packets can stil be received even if the socket
is not bound to the vrf device but to the real iif.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Experiments with MAX6680 and MAX6681 show that the alert function of those
chips is broken, similar to other chips supported by the lm90 driver.
Mark it accordingly.
Experiments with MAX6646 and MAX6648 show that the alert function of those
chips is broken, similar to other chips supported by the lm90 driver.
Mark it accordingly.
Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.
Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL.
Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by: Congyu Liu <liu3101@purdue.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be simulated by constructing
assembly functions. therefore, before executing instruction
simulation, it is necessary to construct assembly function
execution environment in C language through binding registers.
after kasan is enabled, the register binding relationship will
be destroyed, resulting in instruction simulation errors and
causing kernel panic.
the kprobe emulate instruction function is distributed in three
files: actions-common.c actions-arm.c actions-thumb.c, so disable
KASAN when compiling these files.
when running in emulate_ldr to simulate the ldr instruction, panic
occurred, and the log is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 00000090
pgd = ecb46400
[00000090] *pgd=2e0fa003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP ARM
PC is at cap_capable+0x14/0xb0
LR is at emulate_ldr+0x50/0xc0
psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c
r10: 00000000 r9 : c30897f4 r8 : ecd63cd4
r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98
r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 32c5387d Table: 2d546400 DAC: 55555555
Process bash (pid: 1643, stack limit = 0xecd60190)
(cap_capable) from (kprobe_handler+0x218/0x340)
(kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
(kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
(do_undefinstr) from (__und_svc_finish+0x0/0x30)
(__und_svc_finish) from (cap_capable+0x18/0xb0)
(cap_capable) from (cap_vm_enough_memory+0x38/0x48)
(cap_vm_enough_memory) from
(security_vm_enough_memory_mm+0x48/0x6c)
(security_vm_enough_memory_mm) from
(copy_process.constprop.5+0x16b4/0x25c8)
(copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
(_do_fork) from (SyS_clone+0x1c/0x24)
(SyS_clone) from (__sys_trace_return+0x0/0x10)
Code: 0050a0e16c0080e20140a0e10260a0e1 (f801f0e7)
Fixes: 35aa1df43283 ("ARM kprobes: instruction single-stepping support") Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The bnx2fc_destroy() functions are removing the interface before calling
destroy_work. This results multiple WARNings from sysfs_remove_group() as
the controller rport device attributes are removed too early.
Replace the fcoe_port's destroy_work queue. It's not needed.
The problem is easily reproducible with the following steps.
GFP_KERNEL/GFP_DMA can't be used under a spin lock. According the comment,
els_ios_lock is used to protect els ios list so we can move down the spin
lock to avoid using this flag under the lock.
Link: https://lore.kernel.org/r/20220111012441.3232527-1-yangyingliang@huawei.com Fixes: 8f406ef72859 ("scsi: elx: libefc: Extended link Service I/O handling") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
struct rpmsg_eptdev contains a struct cdev. The current code frees
the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is
a managed object, therefore its release is not predictable and the
rpmsg_eptdev could be freed before the cdev is entirely released.
The cdev_device_add/del() API was created to address this issue
(see commit '233ed09d7fda ("chardev: add helper function to register
char devs with a struct device")'), use it instead of cdev add/del().
Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
struct rpmsg_ctrldev contains a struct cdev. The current code frees
the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the
cdev is a managed object, therefore its release is not predictable
and the rpmsg_ctrldev could be freed before the cdev is entirely
released, as in the backtrace below.
The cdev_device_add/del() API was created to address this issue (see
commit '233ed09d7fda ("chardev: add helper function to register char
devs with a struct device")'), use it instead of cdev add/del().
Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match
the width of the stats counters in struct i40e_rx_queue_stats.
Update debugfs code to use the correct format specifier for u64.
Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato@fastly.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix for failed to init adminq: -53 while VF is resetting via MAC
address changing procedure.
Added sync module to avoid reading deadbeef value in reinit adminq
during software reset.
Without this patch it is possible to trigger VF reset procedure
during reinit adminq. This resulted in an incorrect reading of
value from the AQP registers and generated the -53 error.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This was caused by PF queue pile fragmentation due to
flow director VSI queue being placed right after main VSI.
Because of this main VSI was not able to resize its
queue allocation for XDP resulting in no queues allocated
for main VSI when XDP was turned on.
Fix this by always allocating last queue in PF queue pile
for a flow director VSI.
Fixes: 41c445ff0f48 ("i40e: main driver core") Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Before this patch VF interface vanished when
maximum queue number was exceeded. Driver tried
to add next queues even if there was not enough
space. PF sent incorrect number of queues to
the VF when there were not enough of them.
Add an additional condition introduced to check
available space in 'qp_pile' before proceeding.
This condition makes it impossible to add queues
if they number is greater than the number resulting
from available space.
Also add the search for free space in PF queue
pair piles.
Without this patch VF interfaces are not seen
when available space for queues has been
exceeded and following logs appears permanently
in dmesg:
"Unable to get VF config (-32)".
"VF 62 failed opcode 3, retval: -5"
"Unable to get VF config due to PF error condition, not retrying"
Fixes: 7daa6bf3294e ("i40e: driver core headers") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Recently simplified i40e_rebuild causes that FW sometimes
is not ready after NVM update, the ping does not return.
Increase the delay in case of EMP reset.
Old delay of 300 ms was introduced for specific cards for 710 series.
Now it works for all the cards and delay was increased.
Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It has been reported some configuration where the kernel doesn't
boot with KASAN enabled.
This is due to wrong BAT allocation for the KASAN area:
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m
3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m
4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m
A BAT must have both virtual and physical addresses alignment matching
the size of the BAT. This is not the case for BAT 4 above.
Fix kasan_init_region() by using block_size() function that is in
book3s32/mmu.c. To be able to reuse it here, make it non static and
change its name to bat_block_size() in order to avoid name conflict
with block_size() defined in <linux/blkdev.h>
Also reuse find_free_bat() to avoid an error message from setbat()
when no BAT is available.
And allocate memory outside of linear memory mapping to avoid
wasting that precious space.
With this change we get correct alignment for BATs and KASAN shadow
memory is allocated outside the linear memory space.
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m
6: -
7: -
The two 128K should be a single 256K instead.
When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.
Instead, align the top to 128Kbytes so that the function directly
allocates a 256Kbytes last block:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m
5: -
6: -
7: -
Missed adding the Icelake-D CPU to the list. It uses the same MSRs
to control and read the inventory number as all the other models.
Fixes: dc6b025de95b ("x86/mce: Add Xeon Icelake to list of CPUs that support PPIN") Reported-by: Ailin Xu <ailin.xu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220121174743.1875294-2-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Changes to the AMD Thresholding sysfs code prevents sysfs writes from
updating the underlying registers once CPU init is completed, i.e.
"threshold_banks" is set.
Allow the registers to be updated if the thresholding interface is
already initialized or if in the init path. Use the "set_lvt_off" value
to indicate if running in the init path, since this value is only set
during init.
Fixes: a037f3ca0ea0 ("x86/mce/amd: Make threshold bank setting hotplug robust") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220117161328.19148-1-yazen.ghannam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Ville reported that the sysfs "rom" file for VGA devices disappeared after 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute").
Prior to 527139d738d7, FINAL fixups, including pci_fixup_video() where we
find shadow ROMs, were run before pci_create_sysfs_dev_files() created the
sysfs "rom" file.
After 527139d738d7, "rom" is a static attribute and is created before FINAL
fixups are run, so we didn't create "rom" files for shadow ROMs:
acpi_pci_root_add
...
pci_scan_single_device
pci_device_add
pci_fixup_video # <-- new HEADER fixup
device_add
...
if (grp->is_visible())
pci_dev_rom_attr_is_visible # after 527139d738d7
pci_bus_add_devices
pci_bus_add_device
pci_fixup_device(pci_fixup_final)
pci_fixup_video # <-- previous FINAL fixup
pci_create_sysfs_dev_files
if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
sysfs_create_bin_file("rom") # before 527139d738d7
Change pci_fixup_video() to be a HEADER fixup so it runs before sysfs
static attributes are initialized.
Rename the Loongson pci_fixup_radeon() to pci_fixup_video() and make its
dmesg logging identical to the others since it is doing the same job.
Link: https://lore.kernel.org/r/YbxqIyrkv3GhZVxx@intel.com Fixes: 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute") Link: https://lore.kernel.org/r/20220126154001.16895-1-helgaas@kernel.org Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.13+ Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The membarrier command MEMBARRIER_CMD_QUERY allows querying the
available membarrier commands. When the membarrier-rseq fence commands
were added, a new MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK was
introduced with the intent to expose them with the MEMBARRIER_CMD_QUERY
command, the but it was never added to MEMBARRIER_CMD_BITMASK.
The membarrier-rseq fence commands are therefore not wired up with the
query command.
Rename MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK to
MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK (the bitmask is not a command
per-se), and change the erroneous
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ_BITMASK (which does not
actually exist) to MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ.
Wire up MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK in
MEMBARRIER_CMD_BITMASK. Fixing this allows discovering availability of
the membarrier-rseq fence feature.
Fixes: 2a36ab717e8f ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 5.10+ Link: https://lkml.kernel.org/r/20220117203010.30129-1-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols
jbd2_journal_[grab|put]_journal_head as preparation and later use them
in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the
deadlock.
This patch (of 2):
This exports symbols jbd2_journal_[grab|put]_journal_head, which will be
used outside modules, e.g. ocfs2.
Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.
Fix the problem by using a compare-exchange loop to update the tag.
Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101 Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
CCGx clears Bit 0:Device Interrupt in the INTR_REG
if CCGx is reset successfully. However, there might
be a chance that other bits in INTR_REG are not
cleared due to internal data queued in PPM. This case
misleads the driver that CCGx reset failed.
The commit checks bit 0 in INTR_REG and ignores other
bits. The ucsi driver would reset PPM later.
Fixes: 247c554a14aa ("usb: typec: ucsi: add support for Cypress CCGx") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
With some chargers, vbus might momentarily raise above VSAFE5V and fall
back to 0V causing VSAFE0V to be triggered. This will
will report a VBUS off event causing TCPM to transition to
SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT
or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events
while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state.
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
With some chargers, vbus might momentarily raise above VSAFE5V and fall
back to 0V before tcpm gets to read port->tcpc->get_vbus. This will
will report a VBUS off event causing TCPM to transition to
SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT
or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events
while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state.
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
With the AMS and Collision Avoidance, tcpm often needs to change the CC's
termination. When one CC line is sourcing Vconn, if we still change its
termination, the voltage of the another CC line is likely to be fluctuant
and unstable.
Therefore, we should verify whether a CC line is sourcing Vconn before
changing its termination and only change the termination that is not
a Vconn line. This can be done by reading the Vconn Present bit of
POWER_ STATUS register. To determine the polarity, we can read the
Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be
sourced if Plug Orientation is set.
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The syzbot fuzzer has identified a bug in which processes hang waiting
for usb_kill_urb() to return. It turns out the issue is not unlinking
the URB; that works just fine. Rather, the problem arises when the
wakeup notification that the URB has completed is not received.
The reason is memory-access ordering on SMP systems. In outline form,
usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on
different CPUs perform the following actions:
CPU 0 CPU 1
---------------------------- ---------------------------------
usb_kill_urb(): __usb_hcd_giveback_urb():
... ...
atomic_inc(&urb->reject); atomic_dec(&urb->use_count);
... ...
wait_event(usb_kill_urb_queue,
atomic_read(&urb->use_count) == 0);
if (atomic_read(&urb->reject))
wake_up(&usb_kill_urb_queue);
Confining your attention to urb->reject and urb->use_count, you can
see that the overall pattern of accesses on CPU 0 is:
write urb->reject, then read urb->use_count;
whereas the overall pattern of accesses on CPU 1 is:
write urb->use_count, then read urb->reject.
This pattern is referred to in memory-model circles as SB (for "Store
Buffering"), and it is well known that without suitable enforcement of
the desired order of accesses -- in the form of memory barriers -- it
is entirely possible for one or both CPUs to execute their reads ahead
of their writes. The end result will be that sometimes CPU 0 sees the
old un-decremented value of urb->use_count while CPU 1 sees the old
un-incremented value of urb->reject. Consequently CPU 0 ends up on
the wait queue and never gets woken up, leading to the observed hang
in usb_kill_urb().
The same pattern of accesses occurs in usb_poison_urb() and the
failure pathway of usb_hcd_submit_urb().
The problem is fixed by adding suitable memory barriers. To provide
proper memory-access ordering in the SB pattern, a full barrier is
required on both CPUs. The atomic_inc() and atomic_dec() accesses
themselves don't provide any memory ordering, but since they are
present, we can use the optimized smp_mb__after_atomic() memory
barrier in the various routines to obtain the desired effect.
This patch adds the necessary memory barriers.
CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The code that looked up the USB3 PHY was ignoring all errors other than
EPROBE_DEFER in an attempt to handle the PHY not being present. Fix and
simplify the code by using devm_phy_optional_get and dev_err_probe so
that a missing PHY is not treated as an error and unexpected errors
are handled properly.
Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable <stable@vger.kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220126000253.1586760-3-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It appears that the PIPE clock should not be selected when only USB 2.0
is being used in the design and no USB 3.0 reference clock is used.
Also, the core resets are not required if a USB3 PHY is not in use, and
will break things if USB3 is actually used but the PHY entry is not
listed in the device tree.
Skip core resets and register settings that are only required for
USB3 mode when no USB3 PHY is specified in the device tree.
Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable <stable@vger.kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220126000253.1586760-2-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
CDNSP driver read not initialized cdns->otg_v0_regs
which lead to segmentation fault. Patch fixes this issue.
Fixes: 2cf2581cd229 ("usb: cdns3: add power lost support for system resume")
cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220111090737.10345-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently when gadget enumerates in super speed plus, the isoc
endpoint request buffer size is not calculated correctly. Fix
this by checking the gadget speed against USB_SPEED_SUPER_PLUS
and update the request buffer size.
Fixes: 90c4d05780d4 ("usb: fix various gadgets null ptr deref on 10gbps cabling.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 7495af930835 ("ARM: multi_v7_defconfig: Enable drivers for
DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM
multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash
on the Tegra20 Ventana platform in the ulpi_match() function.
The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS,
registers a ulpi_driver but this driver does not provide an 'id_table',
so when ulpi_match() is called on the Tegra20 Ventana platform, it
crashes when attempting to deference the id_table pointer which is not
valid. The Qualcomm USB HS PHY driver uses device-tree for matching the
ULPI driver with the device and so fix this crash by using device-tree
for matching if the id_table is not valid.
Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The basic flow:
1. run time suspend call xhci_suspend, xhci parent devices gate the clock.
2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend
3. xhci_suspend call xhci_disable_hub_port_wake, which access register,
but clock already gated by run time suspend.
This problem was hidden by power domain driver, which call run time resume before it.
But the below commit remove it and make this issue happen.
commit c1df456d0f06e ("PM: domains: Don't runtime resume devices at genpd_prepare()")
This patch call run time resume before suspend to make sure clock is on
before access register.
Reviewed-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Testeb-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver. Typical log messages are:
[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success
Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.
In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default. Users will be able to override this entry by means
of a module parameter, if they want.
CC: <stable@vger.kernel.org> Reported-by: DocMAX <mail@vacharakis.de> Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The file now rightfully throws up a big warning that it should never be
included, so remove it from the header_check test.
Fixes: f23653fe6447 ("tty: Partially revert the removal of the Cyclades public API") Cc: stable <stable@vger.kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: "Maciej W. Rozycki" <macro@embecosm.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220127073304.42399-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This commit adds support for the some of the Brainboxes PCI range of
cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279,
UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368
and UC-420/431.
Fix a user API regression introduced with commit f76edd8f7ce0 ("tty:
cyclades, remove this orphan"), which removed a part of the API and
caused compilation errors for user programs using said part, such as
GCC 9 in its libsanitizer component[1]:
.../libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:160:10: fatal error: linux/cyclades.h: No such file or directory
160 | #include <linux/cyclades.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:664: sanitizer_platform_limits_posix.lo] Error 1
As the absolute minimum required bring `struct cyclades_monitor' and
ioctl numbers back then so as to make the library build again. Add a
preprocessor warning as to the obsolescence of the features provided.
References:
[1] GCC PR sanitizer/100379, "cyclades.h is removed from linux kernel
header files", <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100379>
Fixes: f76edd8f7ce0 ("tty: cyclades, remove this orphan") Cc: stable@vger.kernel.org # v5.13+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maciej W. Rozycki <macro@embecosm.com> Link: https://lore.kernel.org/r/alpine.DEB.2.20.2201260733430.11348@tpp.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF)
are the control characters defined in ISO/IEC 646. These shall be quoted if
seen in the data stream to avoid interpretation as flow control characters.
ISO/IEC 646 refers to the set of ISO standards described as the ISO
7-bit coded character set for information interchange. Its final version
is also known as ITU T.50.
See https://www.itu.int/rec/T-REC-T.50-199209-I/en
To abide the standard it is needed to quote DC1 and DC3 correctly if these
are seen as data bytes and not as control characters. The current
implementation already tries to enforce this but fails to catch all
defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most
significant bit shall be ignored for DC1 and DC3 handling. The current
implementation handles only the case with the most significant bit set 0.
Cases in which DC1 and DC3 have the most significant bit set 1 are left
unhandled.
This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only
the 7 least significant bits set 1) before comparing them with XON
(a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need
quotation via byte stuffing.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
8250_of supports a reg-offset property which is intended to handle
cases where the device registers start at an offset inside the region
of memory allocated to the device. The Xilinx 16550 UART, for which this
support was initially added, requires this. However, the code did not
adjust the overall size of the mapped region accordingly, causing the
driver to request an area of memory past the end of the device's
allocation. For example, if the UART was allocated an address of
0xb0130000, size of 0x10000 and reg-offset of 0x1000 in the device
tree, the region of memory reserved was b0131000-b0140fff, which caused
the driver for the region starting at b0140000 to fail to probe.
Fix this by subtracting reg-offset from the mapped region size.
Fixes: b912b5e2cfb3 ([POWERPC] Xilinx: of_serial support for Xilinx uart 16550.) Cc: stable <stable@vger.kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220112194214.881844-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>