vdev_mirror: load balancing fixes

[mirror_zfs.git] / module / zfs / vdev_queue.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * Copyright (c) 2012, 2017 by Delphix. All rights reserved.
 */

#include <sys/zfs_context.h>
#include <sys/vdev_impl.h>
#include <sys/spa_impl.h>
#include <sys/zio.h>
#include <sys/avl.h>
#include <sys/dsl_pool.h>
#include <sys/metaslab_impl.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/kstat.h>
#include <sys/abd.h>

/*
 * ZFS I/O Scheduler
 * ---------------
 *
 * ZFS issues I/O operations to leaf vdevs to satisfy and complete zios.  The
 * I/O scheduler determines when and in what order those operations are
 * issued.  The I/O scheduler divides operations into five I/O classes
 * prioritized in the following order: sync read, sync write, async read,
 * async write, and scrub/resilver.  Each queue defines the minimum and
 * maximum number of concurrent operations that may be issued to the device.
 * In addition, the device has an aggregate maximum. Note that the sum of the
 * per-queue minimums must not exceed the aggregate maximum. If the
 * sum of the per-queue maximums exceeds the aggregate maximum, then the
 * number of active i/os may reach zfs_vdev_max_active, in which case no
 * further i/os will be issued regardless of whether all per-queue
 * minimums have been met.
 *
 * For many physical devices, throughput increases with the number of
 * concurrent operations, but latency typically suffers. Further, physical
 * devices typically have a limit at which more concurrent operations have no
 * effect on throughput or can actually cause it to decrease.
 *
 * The scheduler selects the next operation to issue by first looking for an
 * I/O class whose minimum has not been satisfied. Once all are satisfied and
 * the aggregate maximum has not been hit, the scheduler looks for classes
 * whose maximum has not been satisfied. Iteration through the I/O classes is
 * done in the order specified above. No further operations are issued if the
 * aggregate maximum number of concurrent operations has been hit or if there
 * are no operations queued for an I/O class that has not hit its maximum.
 * Every time an i/o is queued or an operation completes, the I/O scheduler
 * looks for new operations to issue.
 *
 * All I/O classes have a fixed maximum number of outstanding operations
 * except for the async write class. Asynchronous writes represent the data
 * that is committed to stable storage during the syncing stage for
 * transaction groups (see txg.c). Transaction groups enter the syncing state
 * periodically so the number of queued async writes will quickly burst up and
 * then bleed down to zero. Rather than servicing them as quickly as possible,
 * the I/O scheduler changes the maximum number of active async write i/os
 * according to the amount of dirty data in the pool (see dsl_pool.c). Since
 * both throughput and latency typically increase with the number of
 * concurrent operations issued to physical devices, reducing the burstiness
 * in the number of concurrent operations also stabilizes the response time of
 * operations from other -- and in particular synchronous -- queues. In broad
 * strokes, the I/O scheduler will issue more concurrent operations from the
 * async write queue as there's more dirty data in the pool.
 *
 * Async Writes
 *
 * The number of concurrent operations issued for the async write I/O class
 * follows a piece-wise linear function defined by a few adjustable points.
 *
 *        |                   o---------| <-- zfs_vdev_async_write_max_active
 *   ^    |                  /^         |
 *   |    |                 / |         |
 * active |                /  |         |
 *  I/O   |               /   |         |
 * count  |              /    |         |
 *        |             /     |         |
 *        |------------o      |         | <-- zfs_vdev_async_write_min_active
 *       0|____________^______|_________|
 *        0%           |      |       100% of zfs_dirty_data_max
 *                     |      |
 *                     |      `-- zfs_vdev_async_write_active_max_dirty_percent
 *                     `--------- zfs_vdev_async_write_active_min_dirty_percent
 *
 * Until the amount of dirty data exceeds a minimum percentage of the dirty
 * data allowed in the pool, the I/O scheduler will limit the number of
 * concurrent operations to the minimum. As that threshold is crossed, the
 * number of concurrent operations issued increases linearly to the maximum at
 * the specified maximum percentage of the dirty data allowed in the pool.
 *
 * Ideally, the amount of dirty data on a busy pool will stay in the sloped
 * part of the function between zfs_vdev_async_write_active_min_dirty_percent
 * and zfs_vdev_async_write_active_max_dirty_percent. If it exceeds the
 * maximum percentage, this indicates that the rate of incoming data is
 * greater than the rate that the backend storage can handle. In this case, we
 * must further throttle incoming writes (see dmu_tx_delay() for details).
 */

/*
 * The maximum number of i/os active to each device.  Ideally, this will be >=
 * the sum of each queue's max_active.  It must be at least the sum of each
 * queue's min_active.
 */
uint32_t zfs_vdev_max_active = 1000;

/*
 * Per-queue limits on the number of i/os active to each device.  If the
 * number of active i/os is < zfs_vdev_max_active, then the min_active comes
 * into play. We will send min_active from each queue, and then select from
 * queues in the order defined by zio_priority_t.
 *
 * In general, smaller max_active's will lead to lower latency of synchronous
 * operations.  Larger max_active's may lead to higher overall throughput,
 * depending on underlying storage.
 *
 * The ratio of the queues' max_actives determines the balance of performance
 * between reads, writes, and scrubs.  E.g., increasing
 * zfs_vdev_scrub_max_active will cause the scrub or resilver to complete
 * more quickly, but reads and writes to have higher latency and lower
 * throughput.
 */
uint32_t zfs_vdev_sync_read_min_active = 10;
uint32_t zfs_vdev_sync_read_max_active = 10;
uint32_t zfs_vdev_sync_write_min_active = 10;
uint32_t zfs_vdev_sync_write_max_active = 10;
uint32_t zfs_vdev_async_read_min_active = 1;
uint32_t zfs_vdev_async_read_max_active = 3;
uint32_t zfs_vdev_async_write_min_active = 2;
uint32_t zfs_vdev_async_write_max_active = 10;
uint32_t zfs_vdev_scrub_min_active = 1;
uint32_t zfs_vdev_scrub_max_active = 2;

/*
 * When the pool has less than zfs_vdev_async_write_active_min_dirty_percent
 * dirty data, use zfs_vdev_async_write_min_active.  When it has more than
 * zfs_vdev_async_write_active_max_dirty_percent, use
 * zfs_vdev_async_write_max_active. The value is linearly interpolated
 * between min and max.
 */
int zfs_vdev_async_write_active_min_dirty_percent = 30;
int zfs_vdev_async_write_active_max_dirty_percent = 60;

/*
 * To reduce IOPs, we aggregate small adjacent I/Os into one large I/O.
 * For read I/Os, we also aggregate across small adjacency gaps; for writes
 * we include spans of optional I/Os to aid aggregation at the disk even when
 * they aren't able to help us aggregate at this level.
 */
int zfs_vdev_aggregation_limit = SPA_OLD_MAXBLOCKSIZE;
int zfs_vdev_read_gap_limit = 32 << 10;
int zfs_vdev_write_gap_limit = 4 << 10;

/*
 * Define the queue depth percentage for each top-level. This percentage is
 * used in conjunction with zfs_vdev_async_max_active to determine how many
 * allocations a specific top-level vdev should handle. Once the queue depth
 * reaches zfs_vdev_queue_depth_pct * zfs_vdev_async_write_max_active / 100
 * then allocator will stop allocating blocks on that top-level device.
 * The default kernel setting is 1000% which will yield 100 allocations per
 * device. For userland testing, the default setting is 300% which equates
 * to 30 allocations per device.
 */
#ifdef _KERNEL
int zfs_vdev_queue_depth_pct = 1000;
#else
int zfs_vdev_queue_depth_pct = 300;
#endif


int
vdev_queue_offset_compare(const void *x1, const void *x2)
{
        const zio_t *z1 = (const zio_t *)x1;
        const zio_t *z2 = (const zio_t *)x2;

        int cmp = AVL_CMP(z1->io_offset, z2->io_offset);

        if (likely(cmp))
                return (cmp);

        return (AVL_PCMP(z1, z2));
}

static inline avl_tree_t *
vdev_queue_class_tree(vdev_queue_t *vq, zio_priority_t p)
{
        return (&vq->vq_class[p].vqc_queued_tree);
}

static inline avl_tree_t *
vdev_queue_type_tree(vdev_queue_t *vq, zio_type_t t)
{
        ASSERT(t == ZIO_TYPE_READ || t == ZIO_TYPE_WRITE);
        if (t == ZIO_TYPE_READ)
                return (&vq->vq_read_offset_tree);
        else
                return (&vq->vq_write_offset_tree);
}

int
vdev_queue_timestamp_compare(const void *x1, const void *x2)
{
        const zio_t *z1 = (const zio_t *)x1;
        const zio_t *z2 = (const zio_t *)x2;

        int cmp = AVL_CMP(z1->io_timestamp, z2->io_timestamp);

        if (likely(cmp))
                return (cmp);

        return (AVL_PCMP(z1, z2));
}

static int
vdev_queue_class_min_active(zio_priority_t p)
{
        switch (p) {
        case ZIO_PRIORITY_SYNC_READ:
                return (zfs_vdev_sync_read_min_active);
        case ZIO_PRIORITY_SYNC_WRITE:
                return (zfs_vdev_sync_write_min_active);
        case ZIO_PRIORITY_ASYNC_READ:
                return (zfs_vdev_async_read_min_active);
        case ZIO_PRIORITY_ASYNC_WRITE:
                return (zfs_vdev_async_write_min_active);
        case ZIO_PRIORITY_SCRUB:
                return (zfs_vdev_scrub_min_active);
        default:
                panic("invalid priority %u", p);
                return (0);
        }
}

static int
vdev_queue_max_async_writes(spa_t *spa)
{
        int writes;
        uint64_t dirty = 0;
        dsl_pool_t *dp = spa_get_dsl(spa);
        uint64_t min_bytes = zfs_dirty_data_max *
            zfs_vdev_async_write_active_min_dirty_percent / 100;
        uint64_t max_bytes = zfs_dirty_data_max *
            zfs_vdev_async_write_active_max_dirty_percent / 100;

        /*
         * Async writes may occur before the assignment of the spa's
         * dsl_pool_t if a self-healing zio is issued prior to the
         * completion of dmu_objset_open_impl().
         */
        if (dp == NULL)
                return (zfs_vdev_async_write_max_active);

        /*
         * Sync tasks correspond to interactive user actions. To reduce the
         * execution time of those actions we push data out as fast as possible.
         */
        if (spa_has_pending_synctask(spa))
                return (zfs_vdev_async_write_max_active);

        dirty = dp->dp_dirty_total;
        if (dirty < min_bytes)
                return (zfs_vdev_async_write_min_active);
        if (dirty > max_bytes)
                return (zfs_vdev_async_write_max_active);

        /*
         * linear interpolation:
         * slope = (max_writes - min_writes) / (max_bytes - min_bytes)
         * move right by min_bytes
         * move up by min_writes
         */
        writes = (dirty - min_bytes) *
            (zfs_vdev_async_write_max_active -
            zfs_vdev_async_write_min_active) /
            (max_bytes - min_bytes) +
            zfs_vdev_async_write_min_active;
        ASSERT3U(writes, >=, zfs_vdev_async_write_min_active);
        ASSERT3U(writes, <=, zfs_vdev_async_write_max_active);
        return (writes);
}

static int
vdev_queue_class_max_active(spa_t *spa, zio_priority_t p)
{
        switch (p) {
        case ZIO_PRIORITY_SYNC_READ:
                return (zfs_vdev_sync_read_max_active);
        case ZIO_PRIORITY_SYNC_WRITE:
                return (zfs_vdev_sync_write_max_active);
        case ZIO_PRIORITY_ASYNC_READ:
                return (zfs_vdev_async_read_max_active);
        case ZIO_PRIORITY_ASYNC_WRITE:
                return (vdev_queue_max_async_writes(spa));
        case ZIO_PRIORITY_SCRUB:
                return (zfs_vdev_scrub_max_active);
        default:
                panic("invalid priority %u", p);
                return (0);
        }
}

/*
 * Return the i/o class to issue from, or ZIO_PRIORITY_MAX_QUEUEABLE if
 * there is no eligible class.
 */
static zio_priority_t
vdev_queue_class_to_issue(vdev_queue_t *vq)
{
        spa_t *spa = vq->vq_vdev->vdev_spa;
        zio_priority_t p;

        if (avl_numnodes(&vq->vq_active_tree) >= zfs_vdev_max_active)
                return (ZIO_PRIORITY_NUM_QUEUEABLE);

        /* find a queue that has not reached its minimum # outstanding i/os */
        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 &&
                    vq->vq_class[p].vqc_active <
                    vdev_queue_class_min_active(p))
                        return (p);
        }

        /*
         * If we haven't found a queue, look for one that hasn't reached its
         * maximum # outstanding i/os.
         */
        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 &&
                    vq->vq_class[p].vqc_active <
                    vdev_queue_class_max_active(spa, p))
                        return (p);
        }

        /* No eligible queued i/os */
        return (ZIO_PRIORITY_NUM_QUEUEABLE);
}

void
vdev_queue_init(vdev_t *vd)
{
        vdev_queue_t *vq = &vd->vdev_queue;
        zio_priority_t p;

        mutex_init(&vq->vq_lock, NULL, MUTEX_DEFAULT, NULL);
        vq->vq_vdev = vd;
        taskq_init_ent(&vd->vdev_queue.vq_io_search.io_tqent);

        avl_create(&vq->vq_active_tree, vdev_queue_offset_compare,
            sizeof (zio_t), offsetof(struct zio, io_queue_node));
        avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_READ),
            vdev_queue_offset_compare, sizeof (zio_t),
            offsetof(struct zio, io_offset_node));
        avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE),
            vdev_queue_offset_compare, sizeof (zio_t),
            offsetof(struct zio, io_offset_node));

        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
                int (*compfn) (const void *, const void *);

                /*
                 * The synchronous i/o queues are dispatched in FIFO rather
                 * than LBA order. This provides more consistent latency for
                 * these i/os.
                 */
                if (p == ZIO_PRIORITY_SYNC_READ || p == ZIO_PRIORITY_SYNC_WRITE)
                        compfn = vdev_queue_timestamp_compare;
                else
                        compfn = vdev_queue_offset_compare;
                avl_create(vdev_queue_class_tree(vq, p), compfn,
                    sizeof (zio_t), offsetof(struct zio, io_queue_node));
        }

        vq->vq_last_offset = 0;
}

void
vdev_queue_fini(vdev_t *vd)
{
        vdev_queue_t *vq = &vd->vdev_queue;
        zio_priority_t p;

        for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++)
                avl_destroy(vdev_queue_class_tree(vq, p));
        avl_destroy(&vq->vq_active_tree);
        avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_READ));
        avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE));

        mutex_destroy(&vq->vq_lock);
}

static void
vdev_queue_io_add(vdev_queue_t *vq, zio_t *zio)
{
        spa_t *spa = zio->io_spa;
        spa_stats_history_t *ssh = &spa->spa_stats.io_history;

        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        avl_add(vdev_queue_class_tree(vq, zio->io_priority), zio);
        avl_add(vdev_queue_type_tree(vq, zio->io_type), zio);

        if (ssh->kstat != NULL) {
                mutex_enter(&ssh->lock);
                kstat_waitq_enter(ssh->kstat->ks_data);
                mutex_exit(&ssh->lock);
        }
}

static void
vdev_queue_io_remove(vdev_queue_t *vq, zio_t *zio)
{
        spa_t *spa = zio->io_spa;
        spa_stats_history_t *ssh = &spa->spa_stats.io_history;

        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        avl_remove(vdev_queue_class_tree(vq, zio->io_priority), zio);
        avl_remove(vdev_queue_type_tree(vq, zio->io_type), zio);

        if (ssh->kstat != NULL) {
                mutex_enter(&ssh->lock);
                kstat_waitq_exit(ssh->kstat->ks_data);
                mutex_exit(&ssh->lock);
        }
}

static void
vdev_queue_pending_add(vdev_queue_t *vq, zio_t *zio)
{
        spa_t *spa = zio->io_spa;
        spa_stats_history_t *ssh = &spa->spa_stats.io_history;

        ASSERT(MUTEX_HELD(&vq->vq_lock));
        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        vq->vq_class[zio->io_priority].vqc_active++;
        avl_add(&vq->vq_active_tree, zio);

        if (ssh->kstat != NULL) {
                mutex_enter(&ssh->lock);
                kstat_runq_enter(ssh->kstat->ks_data);
                mutex_exit(&ssh->lock);
        }
}

static void
vdev_queue_pending_remove(vdev_queue_t *vq, zio_t *zio)
{
        spa_t *spa = zio->io_spa;
        spa_stats_history_t *ssh = &spa->spa_stats.io_history;

        ASSERT(MUTEX_HELD(&vq->vq_lock));
        ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
        vq->vq_class[zio->io_priority].vqc_active--;
        avl_remove(&vq->vq_active_tree, zio);

        if (ssh->kstat != NULL) {
                kstat_io_t *ksio = ssh->kstat->ks_data;

                mutex_enter(&ssh->lock);
                kstat_runq_exit(ksio);
                if (zio->io_type == ZIO_TYPE_READ) {
                        ksio->reads++;
                        ksio->nread += zio->io_size;
                } else if (zio->io_type == ZIO_TYPE_WRITE) {
                        ksio->writes++;
                        ksio->nwritten += zio->io_size;
                }
                mutex_exit(&ssh->lock);
        }
}

static void
vdev_queue_agg_io_done(zio_t *aio)
{
        if (aio->io_type == ZIO_TYPE_READ) {
                zio_t *pio;
                zio_link_t *zl = NULL;
                while ((pio = zio_walk_parents(aio, &zl)) != NULL) {
                        abd_copy_off(pio->io_abd, aio->io_abd,
                            0, pio->io_offset - aio->io_offset, pio->io_size);
                }
        }

        abd_free(aio->io_abd);
}

/*
 * Compute the range spanned by two i/os, which is the endpoint of the last
 * (lio->io_offset + lio->io_size) minus start of the first (fio->io_offset).
 * Conveniently, the gap between fio and lio is given by -IO_SPAN(lio, fio);
 * thus fio and lio are adjacent if and only if IO_SPAN(lio, fio) == 0.
 */
#define IO_SPAN(fio, lio) ((lio)->io_offset + (lio)->io_size - (fio)->io_offset)
#define IO_GAP(fio, lio) (-IO_SPAN(lio, fio))

static zio_t *
vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio)
{
        zio_t *first, *last, *aio, *dio, *mandatory, *nio;
        uint64_t maxgap = 0;
        uint64_t size;
        uint64_t limit;
        int maxblocksize;
        boolean_t stretch = B_FALSE;
        avl_tree_t *t = vdev_queue_type_tree(vq, zio->io_type);
        enum zio_flag flags = zio->io_flags & ZIO_FLAG_AGG_INHERIT;
        abd_t *abd;

        maxblocksize = spa_maxblocksize(vq->vq_vdev->vdev_spa);
        limit = MAX(MIN(zfs_vdev_aggregation_limit, maxblocksize), 0);

        if (zio->io_flags & ZIO_FLAG_DONT_AGGREGATE || limit == 0)
                return (NULL);

        first = last = zio;

        if (zio->io_type == ZIO_TYPE_READ)
                maxgap = zfs_vdev_read_gap_limit;

        /*
         * We can aggregate I/Os that are sufficiently adjacent and of
         * the same flavor, as expressed by the AGG_INHERIT flags.
         * The latter requirement is necessary so that certain
         * attributes of the I/O, such as whether it's a normal I/O
         * or a scrub/resilver, can be preserved in the aggregate.
         * We can include optional I/Os, but don't allow them
         * to begin a range as they add no benefit in that situation.
         */

        /*
         * We keep track of the last non-optional I/O.
         */
        mandatory = (first->io_flags & ZIO_FLAG_OPTIONAL) ? NULL : first;

        /*
         * Walk backwards through sufficiently contiguous I/Os
         * recording the last non-optional I/O.
         */
        while ((dio = AVL_PREV(t, first)) != NULL &&
            (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
            IO_SPAN(dio, last) <= limit &&
            IO_GAP(dio, first) <= maxgap) {
                first = dio;
                if (mandatory == NULL && !(first->io_flags & ZIO_FLAG_OPTIONAL))
                        mandatory = first;
        }

        /*
         * Skip any initial optional I/Os.
         */
        while ((first->io_flags & ZIO_FLAG_OPTIONAL) && first != last) {
                first = AVL_NEXT(t, first);
                ASSERT(first != NULL);
        }


        /*
         * Walk forward through sufficiently contiguous I/Os.
         * The aggregation limit does not apply to optional i/os, so that
         * we can issue contiguous writes even if they are larger than the
         * aggregation limit.
         */
        while ((dio = AVL_NEXT(t, last)) != NULL &&
            (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
            (IO_SPAN(first, dio) <= limit ||
            (dio->io_flags & ZIO_FLAG_OPTIONAL)) &&
            IO_SPAN(first, dio) <= maxblocksize &&
            IO_GAP(last, dio) <= maxgap) {
                last = dio;
                if (!(last->io_flags & ZIO_FLAG_OPTIONAL))
                        mandatory = last;
        }

        /*
         * Now that we've established the range of the I/O aggregation
         * we must decide what to do with trailing optional I/Os.
         * For reads, there's nothing to do. While we are unable to
         * aggregate further, it's possible that a trailing optional
         * I/O would allow the underlying device to aggregate with
         * subsequent I/Os. We must therefore determine if the next
         * non-optional I/O is close enough to make aggregation
         * worthwhile.
         */
        if (zio->io_type == ZIO_TYPE_WRITE && mandatory != NULL) {
                zio_t *nio = last;
                while ((dio = AVL_NEXT(t, nio)) != NULL &&
                    IO_GAP(nio, dio) == 0 &&
                    IO_GAP(mandatory, dio) <= zfs_vdev_write_gap_limit) {
                        nio = dio;
                        if (!(nio->io_flags & ZIO_FLAG_OPTIONAL)) {
                                stretch = B_TRUE;
                                break;
                        }
                }
        }

        if (stretch) {
                /*
                 * We are going to include an optional io in our aggregated
                 * span, thus closing the write gap.  Only mandatory i/os can
                 * start aggregated spans, so make sure that the next i/o
                 * after our span is mandatory.
                 */
                dio = AVL_NEXT(t, last);
                dio->io_flags &= ~ZIO_FLAG_OPTIONAL;
        } else {
                /* do not include the optional i/o */
                while (last != mandatory && last != first) {
                        ASSERT(last->io_flags & ZIO_FLAG_OPTIONAL);
                        last = AVL_PREV(t, last);
                        ASSERT(last != NULL);
                }
        }

        if (first == last)
                return (NULL);

        size = IO_SPAN(first, last);
        ASSERT3U(size, <=, maxblocksize);

        abd = abd_alloc_for_io(size, B_TRUE);
        if (abd == NULL)
                return (NULL);

        aio = zio_vdev_delegated_io(first->io_vd, first->io_offset,
            abd, size, first->io_type, zio->io_priority,
            flags | ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE,
            vdev_queue_agg_io_done, NULL);
        aio->io_timestamp = first->io_timestamp;

        nio = first;
        do {
                dio = nio;
                nio = AVL_NEXT(t, dio);
                ASSERT3U(dio->io_type, ==, aio->io_type);

                if (dio->io_flags & ZIO_FLAG_NODATA) {
                        ASSERT3U(dio->io_type, ==, ZIO_TYPE_WRITE);
                        abd_zero_off(aio->io_abd,
                            dio->io_offset - aio->io_offset, dio->io_size);
                } else if (dio->io_type == ZIO_TYPE_WRITE) {
                        abd_copy_off(aio->io_abd, dio->io_abd,
                            dio->io_offset - aio->io_offset, 0, dio->io_size);
                }

                zio_add_child(dio, aio);
                vdev_queue_io_remove(vq, dio);
                zio_vdev_io_bypass(dio);
                zio_execute(dio);
        } while (dio != last);

        return (aio);
}

static zio_t *
vdev_queue_io_to_issue(vdev_queue_t *vq)
{
        zio_t *zio, *aio;
        zio_priority_t p;
        avl_index_t idx;
        avl_tree_t *tree;

again:
        ASSERT(MUTEX_HELD(&vq->vq_lock));

        p = vdev_queue_class_to_issue(vq);

        if (p == ZIO_PRIORITY_NUM_QUEUEABLE) {
                /* No eligible queued i/os */
                return (NULL);
        }

        /*
         * For LBA-ordered queues (async / scrub), issue the i/o which follows
         * the most recently issued i/o in LBA (offset) order.
         *
         * For FIFO queues (sync), issue the i/o with the lowest timestamp.
         */
        tree = vdev_queue_class_tree(vq, p);
        vq->vq_io_search.io_timestamp = 0;
        vq->vq_io_search.io_offset = vq->vq_last_offset - 1;
        VERIFY3P(avl_find(tree, &vq->vq_io_search, &idx), ==, NULL);
        zio = avl_nearest(tree, idx, AVL_AFTER);
        if (zio == NULL)
                zio = avl_first(tree);
        ASSERT3U(zio->io_priority, ==, p);

        aio = vdev_queue_aggregate(vq, zio);
        if (aio != NULL)
                zio = aio;
        else
                vdev_queue_io_remove(vq, zio);

        /*
         * If the I/O is or was optional and therefore has no data, we need to
         * simply discard it. We need to drop the vdev queue's lock to avoid a
         * deadlock that we could encounter since this I/O will complete
         * immediately.
         */
        if (zio->io_flags & ZIO_FLAG_NODATA) {
                mutex_exit(&vq->vq_lock);
                zio_vdev_io_bypass(zio);
                zio_execute(zio);
                mutex_enter(&vq->vq_lock);
                goto again;
        }

        vdev_queue_pending_add(vq, zio);
        vq->vq_last_offset = zio->io_offset + zio->io_size;

        return (zio);
}

zio_t *
vdev_queue_io(zio_t *zio)
{
        vdev_queue_t *vq = &zio->io_vd->vdev_queue;
        zio_t *nio;

        if (zio->io_flags & ZIO_FLAG_DONT_QUEUE)
                return (zio);

        /*
         * Children i/os inherent their parent's priority, which might
         * not match the child's i/o type.  Fix it up here.
         */
        if (zio->io_type == ZIO_TYPE_READ) {
                if (zio->io_priority != ZIO_PRIORITY_SYNC_READ &&
                    zio->io_priority != ZIO_PRIORITY_ASYNC_READ &&
                    zio->io_priority != ZIO_PRIORITY_SCRUB)
                        zio->io_priority = ZIO_PRIORITY_ASYNC_READ;
        } else {
                ASSERT(zio->io_type == ZIO_TYPE_WRITE);
                if (zio->io_priority != ZIO_PRIORITY_SYNC_WRITE &&
                    zio->io_priority != ZIO_PRIORITY_ASYNC_WRITE)
                        zio->io_priority = ZIO_PRIORITY_ASYNC_WRITE;
        }

        zio->io_flags |= ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE;

        mutex_enter(&vq->vq_lock);
        zio->io_timestamp = gethrtime();
        vdev_queue_io_add(vq, zio);
        nio = vdev_queue_io_to_issue(vq);
        mutex_exit(&vq->vq_lock);

        if (nio == NULL)
                return (NULL);

        if (nio->io_done == vdev_queue_agg_io_done) {
                zio_nowait(nio);
                return (NULL);
        }

        return (nio);
}

void
vdev_queue_io_done(zio_t *zio)
{
        vdev_queue_t *vq = &zio->io_vd->vdev_queue;
        zio_t *nio;

        mutex_enter(&vq->vq_lock);

        vdev_queue_pending_remove(vq, zio);

        zio->io_delta = gethrtime() - zio->io_timestamp;
        vq->vq_io_complete_ts = gethrtime();
        vq->vq_io_delta_ts = vq->vq_io_complete_ts - zio->io_timestamp;

        while ((nio = vdev_queue_io_to_issue(vq)) != NULL) {
                mutex_exit(&vq->vq_lock);
                if (nio->io_done == vdev_queue_agg_io_done) {
                        zio_nowait(nio);
                } else {
                        zio_vdev_io_reissue(nio);
                        zio_execute(nio);
                }
                mutex_enter(&vq->vq_lock);
        }

        mutex_exit(&vq->vq_lock);
}

/*
 * As these two methods are only used for load calculations we're not
 * concerned if we get an incorrect value on 32bit platforms due to lack of
 * vq_lock mutex use here, instead we prefer to keep it lock free for
 * performance.
 */
int
vdev_queue_length(vdev_t *vd)
{
        return (avl_numnodes(&vd->vdev_queue.vq_active_tree));
}

uint64_t
vdev_queue_last_offset(vdev_t *vd)
{
        return (vd->vdev_queue.vq_last_offset);
}

#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zfs_vdev_aggregation_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_aggregation_limit, "Max vdev I/O aggregation size");

module_param(zfs_vdev_read_gap_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_read_gap_limit, "Aggregate read I/O over gap");

module_param(zfs_vdev_write_gap_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_write_gap_limit, "Aggregate write I/O over gap");

module_param(zfs_vdev_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_max_active, "Maximum number of active I/Os per vdev");

module_param(zfs_vdev_async_write_active_max_dirty_percent, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_write_active_max_dirty_percent,
        "Async write concurrency max threshold");

module_param(zfs_vdev_async_write_active_min_dirty_percent, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_write_active_min_dirty_percent,
        "Async write concurrency min threshold");

module_param(zfs_vdev_async_read_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_read_max_active,
        "Max active async read I/Os per vdev");

module_param(zfs_vdev_async_read_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_read_min_active,
        "Min active async read I/Os per vdev");

module_param(zfs_vdev_async_write_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_write_max_active,
        "Max active async write I/Os per vdev");

module_param(zfs_vdev_async_write_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_async_write_min_active,
        "Min active async write I/Os per vdev");

module_param(zfs_vdev_scrub_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_scrub_max_active, "Max active scrub I/Os per vdev");

module_param(zfs_vdev_scrub_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_scrub_min_active, "Min active scrub I/Os per vdev");

module_param(zfs_vdev_sync_read_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_sync_read_max_active,
        "Max active sync read I/Os per vdev");

module_param(zfs_vdev_sync_read_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_sync_read_min_active,
        "Min active sync read I/Os per vdev");

module_param(zfs_vdev_sync_write_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_sync_write_max_active,
        "Max active sync write I/Os per vdev");

module_param(zfs_vdev_sync_write_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_sync_write_min_active,
        "Min active sync write I/Os per vdev");

module_param(zfs_vdev_queue_depth_pct, int, 0644);
MODULE_PARM_DESC(zfs_vdev_queue_depth_pct,
        "Queue depth percentage for each top-level vdev");
#endif