MdeModulePkg DxeCore: Fix issue to print GUID value %g without pointer
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
a9141950 2# This package provides the modules that conform to UEFI/PI Industry standards.\r
35c77dae 3# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 4# and libraries instances, which are used for those modules.\r
b7d286b6 5#\r
e1108d97 6# Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>\r
f9bbb8d9 7# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
7c50b343 8# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
e043f789
LD
9# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
10#\r
5fc1ae69
DB
11# This program and the accompanying materials are licensed and made available under\r
12# the terms and conditions of the BSD License that accompanies this distribution.\r
4f57ff18 13# The full text of the license may be found at\r
5fc1ae69
DB
14# http://opensource.org/licenses/bsd-license.php.\r
15#\r
16# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
17# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
b7d286b6 18#\r
4f57ff18 19##\r
b7d286b6 20\r
21\r
b7d286b6 22[Defines]\r
23 DEC_SPECIFICATION = 0x00010005\r
84e20859 24 PACKAGE_NAME = MdeModulePkg\r
fe44bae5 25 PACKAGE_UNI_FILE = MdeModulePkg.uni\r
b7d286b6 26 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
cd68e4a8 27 PACKAGE_VERSION = 0.96\r
b7d286b6 28\r
6bfbb5f0 29[Includes]\r
ed838d0c 30 Include\r
b7d286b6 31\r
30143b15 32\r
6bfbb5f0 33[LibraryClasses]\r
4f57ff18 34 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 35 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 36 IpIoLib|Include/Library/IpIoLib.h\r
73850864 37\r
4f57ff18 38 ## @libraryclass Basic function for UEFI network stack.\r
93367605 39 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 40 NetLib|Include/Library/NetLib.h\r
73850864 41\r
4f57ff18 42 ## @libraryclass The helper routines to access UDP service.\r
93367605 43 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 44 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 45\r
4bad9ada 46 ## @libraryclass The helper routines to access TCP service.\r
47 # This library is only intended to be used by UEFI network stack modules.\r
48 TcpIoLib|Include/Library/TcpIoLib.h\r
49\r
3f6d5100 50 ## @libraryclass The helper routines to access HTTP service.\r
51 # This library is only intended to be used by UEFI network stack modules.\r
52 HttpLib|Include/Library/HttpLib.h\r
53\r
97b2c9b5
LG
54 ## @libraryclass Defines a set of methods to reset whole system.\r
55 ResetSystemLib|Include/Library/ResetSystemLib.h\r
56\r
4f57ff18 57 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 58 # This library class is no longer used and modules using this library should\r
59 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 60 S3Lib|Include/Library/S3Lib.h\r
73850864 61\r
4f57ff18 62 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 63 # This library class is no longer used and modules using this library should\r
64 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 65 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 66\r
804dbc37 67 ## @libraryclass Provides HII related functions.\r
68 HiiLib|Include/Library/HiiLib.h\r
73850864 69\r
4f57ff18 70 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 71 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 72\r
4f57ff18 73 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG
74 DpcLib|Include/Library/DpcLib.h\r
75\r
73850864 76 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG
77 # to the UEFI HII related protocols.\r
78 #\r
da801a6e 79 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 80\r
cd98f305
LG
81 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
82 #\r
975e8815 83 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
cd98f305 84\r
75dea6bd 85 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
86 #\r
87 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
88\r
fe92ab29 89 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
90 #\r
91 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 92\r
467d15ae 93 ## @libraryclass Provide platform specific hooks.\r
94 #\r
95 PlatformHookLib|Include/Library/PlatformHookLib.h\r
495797c5 96\r
97 ## @libraryclass Provide platform specific hooks for SMM core.\r
98 #\r
99 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
32e85209
JY
100\r
101 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
102 #\r
103 LockBoxLib|Include/Library/LockBoxLib.h\r
5fc1ae69 104\r
1e172d6b 105 ## @libraryclass Provide the CPU exception handler.\r
106 #\r
107 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
5fc1ae69 108\r
7c6c064c
ED
109 ## @libraryclass Provides platform specific display interface.\r
110 #\r
111 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
112\r
ae591c14
DM
113 ## @libraryclass Provides sorting functions\r
114 SortLib|Include/Library/SortLib.h\r
115\r
1d112229
RN
116 ## @libraryclass Provides core boot manager functions\r
117 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r
118\r
f4cd24da
RN
119 ## @libraryclass Provides core boot manager functions\r
120 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
121\r
308521b1
SZ
122 ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
123 #\r
124 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
125\r
b6477d82
SZ
126 ## @libraryclass Provides authenticated variable services.\r
127 #\r
371dc63d 128 AuthVariableLib|Include/Library/AuthVariableLib.h\r
b6477d82 129\r
31b183bc
SZ
130 ## @libraryclass Provides variable check services and database management.\r
131 #\r
132 VarCheckLib|Include/Library/VarCheckLib.h\r
133\r
c95d9ab8
SZ
134 ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
135 #\r
136 PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
5fc1ae69 137\r
ba529e7e
ED
138 ## @libraryclass Provides services to get do the file explorer.\r
139 #\r
140 FileExplorerLib|Include/Library/FileExplorerLib.h\r
c95d9ab8 141\r
8dfe7fd2
RN
142 ## @libraryclass Provides interfaces about logo display.\r
143 #\r
144 BootLogoLib|Include/Library/BootLogoLib.h\r
145\r
54b330a4
DB
146 ## @libraryclass Provides interfaces about Ipmi submit generic commond.\r
147 #\r
148 IpmiLib|Include/Library/IpmiLib.h\r
149\r
9e9a30bd
RN
150 ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.\r
151 #\r
152 PciHostBridgeLib|Include/Library/PciHostBridgeLib.h\r
153\r
76570576
SZ
154 ## @libraryclass Provides services to record memory profile of multilevel caller.\r
155 #\r
156 MemoryProfileLib|Include/Library/MemoryProfileLib.h\r
157\r
62d8cb3b
RN
158 ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.\r
159 ##\r
160 FrameBufferBltLib|Include/Library/FrameBufferBltLib.h\r
161\r
df31cf84
JY
162 ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.\r
163 #\r
164 FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h\r
165\r
1652dc21
AB
166 ## @libraryclass Provides a service to register non-discoverable device\r
167 ##\r
168 NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h\r
169\r
6bfbb5f0 170[Guids]\r
f02d0c0f 171 ## MdeModule package token space guid\r
a90ccab8 172 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 173 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 174\r
f02d0c0f 175 ## Hob guid for Pcd DataBase\r
a90ccab8 176 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 177 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 178\r
419db80b
BF
179 ## Guid for PCD DataBase signature.\r
180 # Include/Guid/PcdDataBaseSignatureGuid.h\r
181 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
182\r
5c526736 183 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 184 # Include/Guid/MdeModuleHii.h\r
5c526736 185 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 186\r
5c526736 187 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 188 # Include/Guid/MdeModuleHii.h\r
5c526736 189 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 190\r
f02d0c0f 191 ## Guid to specify the System Non Volatile FV\r
a90ccab8 192 # Include/Guid/SystemNvDataGuid.h\r
351986ae 193 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 194\r
3e02ebb2
SZ
195 ## GUID used as the signature of FTW working block header.\r
196 # Include/Guid/SystemNvDataGuid.h\r
197 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
198\r
199 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
200 # Include/Guid/FaultTolerantWrite.h\r
201 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
202\r
f02d0c0f 203 ## Guid specify the device is the console out device.\r
a90ccab8 204 # Include/Guid/ConsoleOutDevice.h\r
351986ae 205 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG
206\r
207 ## Guid specify the device is the console in device.\r
a90ccab8 208 # Include/Guid/ConsoleInDevice.h\r
351986ae 209 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 210\r
f02d0c0f 211 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 212 # Include/Guid/MemoryTypeInformation.h\r
351986ae 213 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 214\r
f02d0c0f 215 ## Capsule update hob and variable guid\r
a90ccab8 216 # Include/Guid/CapsuleVendor.h\r
351986ae 217 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 218\r
f02d0c0f 219 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 220 # Include/Guid/StandardErrorDevice.h\r
88f20127 221 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 222\r
3709c4cd 223 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 224 # Include/Guid/VariableFormat.h\r
3709c4cd 225 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 226\r
1fe6c125
SZ
227 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
228 # Include/Guid/AuthenticatedVariableFormat.h\r
229 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
230\r
9725730b 231 # Include/Guid/VariableIndexTable.h\r
232 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
233\r
d00ed85e 234 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
235 # Include/Guid/SmmVariableCommon.h\r
236 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
5fc1ae69 237\r
2db4a77e 238 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 239 # Include/Guid/Performance.h\r
f0da4d7d
SZ
240 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
241 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
242 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
243 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
1df7a023 244\r
76f1dde2 245 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 246 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG
247 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
248\r
25126a05 249 ## Include/Guid/StatusCodeCallbackGuid.h\r
250 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 251\r
10c5d87e 252 ## GUID identifies status code records HOB that originate from the PEI status code\r
253 # Include/Guid/MemoryStatusCodeRecord.h\r
254 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
255\r
256 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
257 # Include/Guid/StatusCodeDataTypeDebug.h\r
258 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
259\r
5fc1ae69 260 ## A configuration Table Guid for Load module at fixed address\r
54ea99a7 261 # Include/Guid/LoadModuleAtFixedAddress.h\r
262 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
263\r
62a5bf63 264 ## GUID used to store the global debug mask value into an EFI Variable\r
5fc1ae69 265 # Include/Guid/DebugMask.h\r
62a5bf63 266 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
5fc1ae69 267\r
54cd17e9 268 ## Event for the DXE Core to signal idle events\r
269 # Include/Guid/EventIdle.h\r
270 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
271\r
30c00a1c 272 ## Include/Guid/RecoveryDevice.h\r
273 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
274\r
275 ## Include/Guid/RecoveryDevice.h\r
276 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
277\r
278 ## Include/Guid/RecoveryDevice.h\r
279 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
280\r
281 ## Include/Guid/RecoveryDevice.h\r
282 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
283\r
1c837cd5 284 ## Include/Guid/SmmLockBox.h\r
044824d9 285 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
1c837cd5 286\r
1261fe23 287 ## Include/Guid/AcpiS3Context.h\r
288 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
289\r
290 ## Include/Guid/AcpiS3Context.h\r
291 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
292\r
be46cd5f 293 ## Include/Guid/BootScriptExecutorVariable.h\r
294 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
295 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
296\r
c8ad2d7a
LG
297 ## Include/Guid/UsbKeyBoardLayout.h\r
298 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
299 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
5fc1ae69 300\r
c8ad2d7a
LG
301 ## Include/Guid/HiiResourceSampleHii.h\r
302 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
303\r
304 ## Include/Guid/DriverSampleHii.h\r
305 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
306 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
c8ad2d7a
LG
307 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
308\r
309 ## Include/Guid/PlatDriOverrideHii.h\r
310 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
311\r
1f6729ff 312 ## Include/Guid/Ip4Config2Hii.h\r
313 gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
314\r
c8ad2d7a
LG
315 ## Include/Guid/VlanConfigHii.h\r
316 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
317\r
318 ## Include/Guid/Ip4IScsiConfigHii.h\r
319 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
320 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
321\r
322 ## Include/Guid/ZeroGuid.h\r
323 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
5fc1ae69 324\r
c8ad2d7a
LG
325 ## Include/Guid/MtcVendor.h\r
326 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
327\r
0284e90c
LG
328 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
329 # Include/Guid/FirmwarePerformance.h\r
044824d9 330 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
db91c620 331 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
044824d9 332\r
333 ## Include/Guid/ExitBootServiceFailed.h\r
334 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
0284e90c 335\r
f58f3de0 336 ## Include/Guid/ConnectConInEvent.h\r
337 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
338\r
69fc8f08
RN
339 ## Include/Guid/StatusCodeDataTypeVariable.h\r
340 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
5fc1ae69 341\r
84edd20b
SZ
342 ## Include/Guid/MemoryProfile.h\r
343 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
94092aa6 344 gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}\r
69fc8f08 345\r
4edb1866
SZ
346 ## Include/Protocol/VarErrorFlag.h\r
347 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
348\r
841b2590
SB
349 ## GUID indicates the BROTLI custom compress/decompress algorithm.\r
350 gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}\r
351\r
a7adc5c5
LG
352 ## GUID indicates the LZMA custom compress/decompress algorithm.\r
353 # Include/Guid/LzmaDecompress.h\r
354 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
355 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
356\r
6e3227c8
RF
357 ## Include/Guid/TtyTerm.h\r
358 gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
359\r
143f0b1d
ED
360 ## Include/Guid/HiiBootMaintenanceFormset.h\r
361 gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
3a2dc0f5
DB
362\r
363 gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
364\r
20752cb8
HW
365 ## Include/Guid/RamDiskHii.h\r
366 gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}\r
367\r
1e01ea24
JY
368 ## Include/Guid/PiSmmCommunicationRegionTable.h\r
369 gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}\r
5fc1ae69 370\r
33745854
JY
371 ## Include/Guid/PiSmmMemoryAttributesTable.h\r
372 gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}\r
373\r
65fb940a
JY
374 ## Include/Guid/SmiHandlerProfile.h\r
375 gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}\r
376\r
9598cdc2
AB
377 ## Include/Guid/NonDiscoverableDevice.h\r
378 gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }\r
379 gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }\r
380 gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }\r
381 gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }\r
382 gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }\r
383 gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }\r
384 gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }\r
385 gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }\r
386 gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }\r
387\r
a391e592
AB
388 ## Include/Guid/PlatformHasAcpi.h\r
389 gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }\r
390\r
4b1bf81c 391[Ppis]\r
ea060cfa 392 ## Include/Ppi/AtaController.h\r
393 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
394\r
4b1bf81c 395 ## Include/Ppi/UsbHostController.h\r
396 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
397\r
398 ## Include/Ppi/Usb2HostController.h\r
399 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
400\r
401 ## Include/Ppi/UsbController.h\r
402 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
403\r
404 ## Include/Ppi/UsbIo.h\r
405 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
406\r
ce2f13a3 407 ## Include/Ppi/SecPerformance.h\r
408 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
409\r
9fba8e7d 410 ## Include/Ppi/SmmCommunication.h\r
411 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
412\r
e7b7db36 413 ## Include/Ppi/SmmAccess.h\r
414 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
415\r
3e4df77f 416 ## Include/Ppi/SmmControl.h\r
417 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
418\r
78df32f2 419 ## Include/Ppi/PostBootScriptTable.h\r
420 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
421\r
883e23d0
LG
422 ## Include/Ppi/SerialPortPei.h\r
423 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
424\r
0591696e
FT
425 ## Include/Ppi/UfsHostController.h\r
426 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
427\r
54b330a4
DB
428 ## Include/Ppi/IpmiPpi.h\r
429 gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}\r
430\r
48555339
FT
431 ## Include/Ppi/SdMmcHostController.h\r
432 gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}\r
433\r
6bfbb5f0 434[Protocols]\r
023c0fec 435 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG
436 # Include/Protocol/LoadPe32Image.h\r
437 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
438 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 439 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 440\r
e43adbaf 441 ## Print protocols define basic print functions to print the format unicode and ascii string.\r
a90ccab8 442 # Include/Protocol/Print2.h\r
504dcb0a 443 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
e43adbaf 444 gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }\r
2dd4c603 445\r
346cf9ac 446 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 447 # Include/Protocol/GenericMemoryTest.h\r
351986ae 448 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 449\r
2b2efe33
PB
450 ## This protocol defines the Debugger Configuration interface.\r
451 # Include/Protocol/DebuggerConfiguration.h\r
452 gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}\r
453\r
55e4e173 454 ## Include/Protocol/Dpc.h\r
36ee91ca 455 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 456\r
85e923a5
LG
457 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
458 # Include/Protocol/FaultTolerantWrite.h\r
459 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 460\r
8a2d4996 461 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
462 # Include/Protocol/SmmFaultTolerantWrite.h\r
463 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
5fc1ae69 464\r
85e923a5
LG
465 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
466 # Include/Protocol/SwapAddressRange.h\r
467 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
5fc1ae69 468\r
8a2d4996 469 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
470 # Include/Protocol/SmmSwapAddressRange.h\r
471 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
5fc1ae69 472\r
8a2d4996 473 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
474 # Include/Protocol/SmmVariableProtocol.h\r
475 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
476\r
ff843847
RN
477 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
478 # Include/Protocol/VariableLock.h\r
479 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
480\r
efb01a10
SZ
481 ## Include/Protocol/VarCheck.h\r
482 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r
483\r
484 ## Include/Protocol/SmmVarCheck.h\r
485 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r
486\r
8a2d4996 487 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
488 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
489 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 490\r
62a5bf63 491 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
5fc1ae69 492 # Include/Guid/DebugMask.h\r
62a5bf63 493 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
1c837cd5 494\r
495 ## Include/Protocol/LockBox.h\r
496 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
5fc1ae69 497\r
0a48ffb0 498 ## Include/Protocol/FormBrowserEx.h\r
48a9d5f7 499 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
2fa0e11d 500 gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
48a9d5f7 501\r
c8ad2d7a
LG
502 ## Include/Protocol/EbcVmTest.h\r
503 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
504\r
505 ## Include/Protocol/EbcSimpleDebugger.h\r
506 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
e2988e66 507\r
508 ## Include/Protocol/BootLogo.h\r
509 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
510\r
7c6c064c
ED
511 ## Include/Protocol/DisplayProtocol.h\r
512 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
513\r
514 ## Include/Protocol/FormBrowserEx2.h\r
515 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
516\r
0591696e
FT
517 ## Include/Protocol/UfsHostController.h\r
518 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
5fc1ae69 519\r
8d51e87d
CZ
520 ## Include/Protocol/EsrtManagement.h\r
521 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
0591696e 522\r
53ec4d7f
SZ
523 ## Include/Protocol/SmmExitBootServices.h\r
524 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
525\r
526 ## Include/Protocol/SmmLegacyBoot.h\r
527 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
528\r
529 ## Include/Protocol/SmmReadyToBoot.h\r
530 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
531\r
6313eb25 532 ## Include/Protocol/PlatformLogo.h\r
e0ac9c8a 533 gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }\r
6313eb25 534\r
515575f7
ED
535 ## Include/Protocol/FileExplorer.h\r
536 gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
537\r
54b330a4
DB
538 ## Include/Protocol/IpmiProtocol.h\r
539 gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }\r
540 gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }\r
541\r
08a41a25
RN
542 ## PS/2 policy protocol abstracts the specific platform initialization and setting.\r
543 # Include/Protocol/Ps2Policy.h\r
544 gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }\r
545\r
9598cdc2
AB
546 ## Include/Protocol/NonDiscoverableDevice.h\r
547 gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }\r
548\r
fe44bae5
SZ
549#\r
550# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
551# 0x80000001 | Invalid value provided.\r
552# 0x80000002 | Reserved bits must be set to zero.\r
553# 0x80000003 | Incorrect progress code provided.\r
554# 0x80000004 | Invalid foreground color specified.\r
555# 0x80000005 | Invalid background color specified.\r
556# 0x80000006 | Incorrect error code provided.\r
557#\r
558\r
a86ae184 559[PcdsFeatureFlag]\r
fe44bae5
SZ
560 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
561 # TRUE - Supports update capsule across a system reset.<BR>\r
562 # FALSE - Does not support update capsule across a system reset.<BR>\r
563 # @Prompt Enable update capsule across a system reset.\r
109e9a61 564 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 565\r
fe44bae5
SZ
566 ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
567 # TRUE - All PCD PPI services will be produced.<BR>\r
568 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
569 # @Prompt Enable full PEI PCD services.\r
f806dd27
LG
570 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
571\r
fe44bae5
SZ
572 ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
573 # It can be disabled to save size.<BR><BR>\r
574 # TRUE - Device Path To Text Protocol will be produced.<BR>\r
575 # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
576 # @Prompt Enable Device Path to Text support.\r
348c8131 577 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 578\r
fe44bae5
SZ
579 ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
580 # It can be disabled to save size.<BR><BR>\r
581 # TRUE - Device Path From Text Protocol will be produced.<BR>\r
582 # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
583 # @Prompt Enable Device Path From Text support.\r
348c8131 584 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 585\r
fe44bae5 586 ## Indicates if the statistics about variable usage will be collected. This information is\r
fc9da5a6 587 # stored as a vendor configuration table into the EFI system table.\r
fe44bae5
SZ
588 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
589 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
590 # TRUE - Statistics about variable usage will be collected.<BR>\r
591 # FALSE - Statistics about variable usage will not be collected.<BR>\r
592 # @Prompt Enable variable statistics collection.\r
33a5a666 593 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 594\r
fe44bae5
SZ
595 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
596 # TRUE - Installs Unicode Collation Protocol.<BR>\r
597 # FALSE - Does not install Unicode Collation Protocol.<BR>\r
598 # @Prompt Enable Unicode Collation support.\r
ac12a167 599 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 600\r
fe44bae5
SZ
601 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
602 # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
603 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
604 # @Prompt Enable Unicode Collation 2 support.\r
ac12a167 605 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 606\r
fe44bae5
SZ
607 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
608 # It could be set FALSE to save size.<BR><BR>\r
609 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
610 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
611 # @Prompt Enable ConOut GOP support.\r
d0c64728 612 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 613\r
fe44bae5
SZ
614 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
615 # It could be set FALSE to save size.<BR><BR>\r
616 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
617 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
618 # @Prompt Enable ConOut UGA support.\r
d0c64728 619 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 620\r
fe44bae5
SZ
621 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
622 # This PCD is used to tune PEI phase performance to reduce the search image time.\r
623 # It can be set according to the generated image section type.<BR><BR>\r
624 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
625 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
626 # @Prompt PeiCore search TE section first.\r
3076397e 627 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 628\r
fe44bae5
SZ
629 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
630 # interrupt to access usb device in the case of absence of usb stack.\r
631 # DUET platform requires the token to be TRUE.<BR><BR>\r
632 # TRUE - Turn off usb legacy support.<BR>\r
633 # FALSE - Does not turn off usb legacy support.<BR>\r
35c77dae 634 # @Prompt Turn off USB legacy support.\r
cc582cff 635 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
5fc1ae69 636\r
fe44bae5
SZ
637 ## Indicates if HiiImageProtocol will be installed.\r
638 # FALSE is for size reduction.<BR><BR>\r
639 # TRUE - Installs HiiImageProtocol.<BR>\r
640 # FALSE - Does not install HiiImageProtocol.<BR>\r
641 # @Prompt Enable HII image support.\r
813acf3a 642 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 643\r
fe44bae5 644 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
a8e1ed54 645 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
fe44bae5
SZ
646 # from HII database.<BR><BR>\r
647 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
648 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
649 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
813acf3a 650 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 651\r
fe44bae5
SZ
652 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
653 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
654 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
655 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
656 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
657 # @Prompt Enable framework backward compatibility support.\r
f806dd27 658 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 659\r
fe44bae5
SZ
660 ## Indicates if HelloWorld Application will print the verbose information.\r
661 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
662 # TRUE - HelloWorld Application will print the verbose information.<BR>\r
663 # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
664 # @Prompt Enable HelloWorld print.\r
223c22d8 665 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 666\r
fe44bae5
SZ
667 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
668 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
669 # FALSE - Only FTW Write service is available.<BR>\r
670 # @Prompt Enable FULL FTW services.\r
72670d3e 671 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
672\r
fe44bae5
SZ
673 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
674 # TRUE - DXE IPL will support UEFI decompression.<BR>\r
675 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
676 # @Prompt Enable UEFI decompression support in DXE IPL.\r
72670d3e 677 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 678\r
fe44bae5
SZ
679 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
680 # TRUE - PciBus driver supports the hot plug device.<BR>\r
681 # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
682 # @Prompt Enable PciBus hot plug device support.\r
9060e3ec 683 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
684\r
fe44bae5
SZ
685 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
686 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
687 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
688 # @Prompt Enable PCI bridge IO alignment probe.\r
b3ec9b56 689 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
fe44bae5
SZ
690\r
691 ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
692 # TRUE - Reports StatusCode via Serial port.<BR>\r
693 # FALSE - Does not report StatusCode via Serial port.<BR>\r
694 # @Prompt Enable StatusCode via Serial port.\r
10c5d87e 695 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
696\r
fe44bae5
SZ
697 ## Indicates if StatusCode is stored in memory.\r
698 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
699 # TRUE - Stores StatusCode in memory.<BR>\r
700 # FALSE - Does not store StatusCode in memory.<BR>\r
701 # @Prompt Enable StatusCode via memory.\r
10c5d87e 702 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
703\r
fe44bae5
SZ
704 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
705 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
706 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
707 # @Prompt Enable PEI StatusCode replay in DXE phase\r
10c5d87e 708 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 709\r
fe44bae5
SZ
710 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
711 # TRUE - Installs ACPI SDT protocol.<BR>\r
712 # FALSE - Does not install ACPI SDT protocol.<BR>\r
713 # @Prompt Enable ACPI SDT support.\r
3dc8585e
JY
714 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
715\r
fe44bae5
SZ
716 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
717 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
718 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
719 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
720 # @Prompt Enable unaligned PCI I/O support.\r
aeeb84ba 721 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
11232773 722\r
fe44bae5
SZ
723 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
724 # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
725 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
726 # @Prompt Always GrayOut TEXT statement.\r
11232773 727 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
fe44bae5
SZ
728\r
729 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
730 # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
731 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
732 # @Prompt GrayOut read only menu.\r
0777cea6
ED
733 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
734\r
fe44bae5
SZ
735 ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
736 # TRUE - Supports recovery from IDE disk.<BR>\r
737 # FALSE - Does not support recovery from IDE disk.<BR>\r
738 # @Prompt Enable recovery on IDE disk.\r
74ef1d42 739 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
740\r
fe44bae5
SZ
741 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
742 # TRUE - Supports recovery from FAT floppy disk.<BR>\r
743 # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
744 # @Prompt Enable recovery on FAT floppy disk.\r
74ef1d42 745 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
746\r
fe44bae5
SZ
747 ## Indicates if recovery from data CD will be supported.<BR><BR>\r
748 # TRUE - Supports recovery from data CD.<BR>\r
749 # FALSE - Does not support recovery from data CD.<BR>\r
750 # @Prompt Enable recovery on data CD.\r
74ef1d42 751 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
752\r
fe44bae5
SZ
753 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
754 # TRUE - Supports recovery from USB disk.<BR>\r
755 # FALSE - Does not support recovery from USB disk.<BR>\r
756 # @Prompt Enable recovery on FAT USB disk.\r
74ef1d42 757 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
758\r
fe44bae5
SZ
759 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
760 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
761 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
762 # @Prompt Enable S3 performance data support.\r
0284e90c
LG
763 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
764\r
4aa68cbc
RN
765 ## Indicates if PS2 keyboard does a extended verification during start.\r
766 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
767 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
768 # TRUE - Turn on PS2 keyboard extended verification.<BR>\r
769 # FALSE - Turn off PS2 keyboard extended verification.<BR>\r
770 # @Prompt Turn on PS2 Keyboard Extended Verification\r
771 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072\r
772\r
a59e2ede
RN
773 ## Indicates if Serial device uses half hand shake.<BR><BR>\r
774 # TRUE - Serial device uses half hand shake.<BR>\r
775 # FALSE - Serial device doesn't use half hand shake.<BR>\r
776 # @Prompt Enable Serial device Half Hand Shake\r
777 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
778\r
8a45f80e
DB
779 ## Indicates if HII data and configuration has been exported.<BR><BR>\r
780 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
781 # simulator platform because the performance cost for this feature.\r
782 # TRUE - Export HII data and configuration data.<BR>\r
783 # FALSE - Does not export HII data and configuration.<BR>\r
784 # @Prompt Enable export HII data and configuration to be used in OS runtime.\r
785 gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074\r
786\r
77833d0b
RN
787 ## Indicates if PS2 mouse does a extended verification during start.\r
788 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
789 # TRUE - Turn on PS2 mouse extended verification. <BR>\r
790 # FALSE - Turn off PS2 mouse extended verification. <BR>\r
791 # @Prompt Turn on PS2 Mouse Extended Verification\r
792 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075\r
793\r
065ae7d7
AB
794 ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM\r
795 # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),\r
796 # which requires that all PCI MMIO BARs are located below 4 GB\r
797 # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM\r
798 # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM\r
799 # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
800 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
801\r
802[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
803 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
804\r
5d2311be 805[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
fe44bae5
SZ
806 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
807 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
808 # is built in firmware.<BR><BR>\r
809 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
810 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
811 # @Prompt DxeIpl switch to long mode.\r
4e17cc90 812 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
813\r
fe44bae5
SZ
814 ## Indicates if DxeIpl should rebuild page tables. This flag only\r
815 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
816 # TRUE - DxeIpl will rebuild page tables.<BR>\r
817 # FALSE - DxeIpl will not rebuild page tables.<BR>\r
818 # @Prompt DxeIpl rebuild page tables.\r
e47f0da4 819 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
820\r
a86ae184 821[PcdsFixedAtBuild]\r
fe44bae5
SZ
822 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
823 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
824 # 0: Disable the feature.<BR>\r
825 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
826 # @Prompt Enable LMFA feature.\r
827 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
54ea99a7 828 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
d13e7bda 829\r
fe44bae5
SZ
830 ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
831 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
832 # @Prompt Progress Code for OS Loader LoadImage start.\r
833 # @ValidList 0x80000003 | 0x03058000\r
eab90a61 834 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
835\r
fe44bae5
SZ
836 ## Progress Code for OS Loader StartImage start.<BR><BR>\r
837 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
838 # @Prompt Progress Code for OS Loader StartImage start.\r
839 # @ValidList 0x80000003 | 0x03058001\r
eab90a61 840 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
841\r
fe44bae5
SZ
842 ## Progress Code for S3 Suspend start.<BR><BR>\r
843 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
844 # @Prompt Progress Code for S3 Suspend start.\r
845 # @ValidList 0x80000003 | 0x03078000\r
eab90a61 846 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
847\r
fe44bae5
SZ
848 ## Progress Code for S3 Suspend end.<BR><BR>\r
849 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
850 # @Prompt Progress Code for S3 Suspend end.\r
851 # @ValidList 0x80000003 | 0x03078001\r
eab90a61 852 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
853\r
fe44bae5
SZ
854 ## Error Code for SetVariable failure.<BR><BR>\r
855 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
856 # @Prompt Error Code for SetVariable failure.\r
857 # @ValidList 0x80000006 | 0x03058002\r
69fc8f08
RN
858 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
859\r
fe44bae5
SZ
860[PcdsFixedAtBuild, PcdsPatchableInModule]\r
861 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
862 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
863 # for a dynamic PCD used in PEI phase.\r
864 # @Prompt Max PEI PCD callback number per PCD entry.\r
865 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
866\r
35c77dae 867 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
adcd7381 868 # to store PCD value.\r
fe44bae5 869 # @Prompt VPD base address.\r
adcd7381
SZ
870 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
871\r
fe781940
SZ
872 ## Maximum number of FV is supported by PeiCore's dispatching.\r
873 # @Prompt Maximum number of FV supported by PeiCore.\r
874 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
875\r
876 ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
877 # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
878 # @Prompt Maximum File count per FV supported by PeiCore.\r
879 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
880\r
fe44bae5
SZ
881 ## Maximum stack size for PeiCore.\r
882 # @Prompt Maximum stack size for PeiCore.\r
883 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
884\r
fe781940
SZ
885 ## Maximum PPI count is supported by PeiCore's PPI database.\r
886 # @Prompt Maximum PPI count supported by PeiCore.\r
887 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
888\r
fe44bae5
SZ
889 ## The maximum size of a single non-HwErr type variable.\r
890 # @Prompt Maximum variable size.\r
891 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
892\r
8457d0e7
SZ
893 ## The maximum size of a single authenticated variable.\r
894 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
895 # @Prompt Maximum authenticated variable size.\r
896 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
897\r
fe44bae5
SZ
898 ## The maximum size of single hardware error record variable.<BR><BR>\r
899 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
900 # In IA64 platforms, this value should be larger than 128KB.<BR>\r
901 # @Prompt Maximum HwErr variable size.\r
902 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
903\r
4edb1866 904 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5 905 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
4edb1866 906 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5
SZ
907 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
908 # @Prompt HwErr variable storage size.\r
909 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
910\r
4edb1866
SZ
911 ## The size of maximum user NV variable space.<BR><BR>\r
912 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
913 # If the value is 0, it means user variable share the same NV storage with system variable,\r
914 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r
7cff4456 915 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r
4edb1866
SZ
916 # otherwise the variable will be regarded as user variable.<BR>\r
917 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r
918 # 2) Variables managed by Variable driver internally.<BR>\r
919 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r
7cff4456 920 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r
4edb1866
SZ
921 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r
922 # @Prompt Maximum user NV variable space size.\r
923 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r
924\r
925 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r
926 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
927 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r
928 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r
929 # Then the common NV variable space size at boottime will be\r
930 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r
931 # and the common NV variable space size at runtime will be\r
932 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r
933 # @Prompt Boottime reserved NV variable space size.\r
934 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r
935\r
0fb5e515
SZ
936 ## Reclaim variable space at EndOfDxe.<BR><BR>\r
937 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r
938 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r
939 # @Prompt Reclaim variable space at EndOfDxe.\r
940 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r
941\r
fe44bae5
SZ
942 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
943 # @Prompt Variable storage size.\r
944 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
945\r
946 ## FFS filename to find the ACPI tables.\r
947 # @Prompt FFS name of ACPI tables storage.\r
948 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
949\r
950 ## FFS filename to find the capsule coalesce image.\r
951 # @Prompt FFS name of capsule coalesce image.\r
952 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
953\r
35c77dae 954 ## Maximum number of performance log entries during PEI phase.\r
7c50b343
CS
955 # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is\r
956 # more than 255.\r
35c77dae 957 # @Prompt Maximum number of PEI performance log entries.\r
348c8131 958 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 959\r
7c50b343
CS
960 ## Maximum number of performance log entries during PEI phase.\r
961 # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of\r
962 # entries. If greater than 0, then this PCD determines the number of entries,\r
963 # and PcdMaxPeiPerformanceLogEntries is ignored.\r
964 # @Prompt Maximum number of PEI performance log entries.\r
965 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035\r
966\r
fe44bae5
SZ
967 ## RTC Update Timeout Value(microsecond).\r
968 # @Prompt RTC Update Timeout Value.\r
4e17cc90 969 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 970\r
fe44bae5
SZ
971 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
972 # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
973 # FALSE - 16550 serial port registers are in I/O space.<BR>\r
974 # @Prompt Serial port registers use MMIO.\r
467d15ae 975 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
fe44bae5
SZ
976\r
977 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
978 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
979 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
980 # @Prompt Enable serial port hardware flow control.\r
467d15ae 981 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
982\r
fe44bae5
SZ
983 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
984 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
985 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
986 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
987 # @Prompt Enable serial port cable detetion.\r
784ce127 988 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
5fc1ae69 989\r
fe44bae5
SZ
990 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
991 # @Prompt Base address of serial port registers.\r
467d15ae 992 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
993\r
994 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
fe44bae5
SZ
995 # @Prompt Baud rate for serial port.\r
996 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
467d15ae 997 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
998\r
fe44bae5
SZ
999 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
1000 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
1001 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
1002 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
1003 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 1004 #\r
fe44bae5
SZ
1005 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
1006 # @Prompt Serial port Line Control settings.\r
1007 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
467d15ae 1008 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
1009\r
fe44bae5
SZ
1010 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
1011 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
1012 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
1013 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
1014 # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
1015 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
1016 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 1017 #\r
fe44bae5
SZ
1018 # Default is to enable and clear all FIFOs.<BR>\r
1019 # @Prompt Serial port FIFO Control settings.\r
1020 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
467d15ae 1021 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
1022\r
3ddcceea 1023 ## This setting can override the default TFTP block size. A value of 0 computes\r
1024 # the default from MTU information. A non-zero value will be used as block size\r
1025 # in bytes.\r
fe44bae5
SZ
1026 # @Prompt TFTP block size.\r
1027 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
1028\r
6eea8eae 1029 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
fe44bae5 1030 # structure. The default value for this PCD is 0, which means that the DXE Core\r
6eea8eae 1031 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
5fc1ae69 1032 # boundary as close to the top of memory as feasible. If this PCD is set to a\r
fe44bae5 1033 # value other than 0, then the DXE Core will first attempt to allocate the\r
6eea8eae
LG
1034 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
1035 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
1036 # boundary as close to the top of memory as feasible.\r
fe44bae5 1037 # @Prompt Maximum Efi System Table Pointer address.\r
6eea8eae 1038 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
838a9c58 1039\r
fe44bae5
SZ
1040 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
1041 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
1042 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
5fc1ae69 1043 # @Prompt Shadow Peim On S3 Boot.\r
5d7f3126
LG
1044 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
1045\r
3d44658c 1046 ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
5fc1ae69 1047 # This PCD is used on other boot path except for S3 boot.\r
3d44658c
LG
1048 # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
1049 # FALSE - Not shadow PEIM after memory is ready.<BR>\r
1050 # @Prompt Shadow Peim and PeiCore on boot\r
1051 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
1052\r
84edd20b
SZ
1053 ## The mask is used to control memory profile behavior.<BR><BR>\r
1054 # BIT0 - Enable UEFI memory profile.<BR>\r
1055 # BIT1 - Enable SMRAM profile.<BR>\r
94092aa6 1056 # BIT7 - Disable recording at the start.<BR>\r
84edd20b 1057 # @Prompt Memory Profile Property.\r
94092aa6 1058 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0\r
84edd20b
SZ
1059 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
1060\r
c5e7ba57
JY
1061 ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>\r
1062 # BIT0 - Enable SmiHandlerProfile.<BR>\r
1063 # @Prompt SmiHandlerProfile Property.\r
1064 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0\r
1065 gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108\r
1066\r
84edd20b
SZ
1067 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
1068 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
1069 #\r
1070 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
1071 # EfiReservedMemoryType 0x0001<BR>\r
1072 # EfiLoaderCode 0x0002<BR>\r
1073 # EfiLoaderData 0x0004<BR>\r
1074 # EfiBootServicesCode 0x0008<BR>\r
1075 # EfiBootServicesData 0x0010<BR>\r
1076 # EfiRuntimeServicesCode 0x0020<BR>\r
1077 # EfiRuntimeServicesData 0x0040<BR>\r
1078 # EfiConventionalMemory 0x0080<BR>\r
1079 # EfiUnusableMemory 0x0100<BR>\r
1080 # EfiACPIReclaimMemory 0x0200<BR>\r
1081 # EfiACPIMemoryNVS 0x0400<BR>\r
1082 # EfiMemoryMappedIO 0x0800<BR>\r
1083 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
1084 # EfiPalCode 0x2000<BR>\r
8f2f2f19 1085 # EfiPersistentMemory 0x4000<BR>\r
db9b00f1 1086 # OEM Reserved 0x4000000000000000<BR>\r
84edd20b
SZ
1087 # OS Reserved 0x8000000000000000<BR>\r
1088 #\r
1089 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
1090 #\r
1091 # @Prompt Memory profile memory type.\r
1092 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
1093\r
94092aa6
SZ
1094 ## This PCD is to control which drivers need memory profile data.<BR><BR>\r
1095 # For example:<BR>\r
1096 # One image only (Shell):<BR>\r
1097 # Header GUID<BR>\r
1098 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1099 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1100 # Two or more images (Shell + WinNtSimpleFileSystem):<BR>\r
1101 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1102 # 0x7F, 0x01, 0x04, 0x00,<BR>\r
1103 # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>\r
1104 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1105 # @Prompt Memory profile driver path.\r
1106 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043\r
1107\r
861cc656
JY
1108 ## Set image protection policy. The policy is bitwise.\r
1109 # If a bit is set, the image will be protected by DxeCore if it is aligned.\r
1110 # The code section becomes read-only, and the data section becomes non-executable.\r
1111 # If a bit is clear, the image will not be protected.<BR><BR>\r
1112 # BIT0 - Image from unknown device. <BR>\r
1113 # BIT1 - Image from firmware volume.<BR>\r
1114 # @Prompt Set image protection policy.\r
1115 # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F\r
1116 gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047\r
1117\r
973e388a
AB
1118 ## Set DXE memory protection policy. The policy is bitwise.\r
1119 # If a bit is set, memory regions of the associated type will be mapped\r
1120 # non-executable.<BR><BR>\r
1121 #\r
1122 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
1123 # EfiReservedMemoryType 0x0001<BR>\r
1124 # EfiLoaderCode 0x0002<BR>\r
1125 # EfiLoaderData 0x0004<BR>\r
1126 # EfiBootServicesCode 0x0008<BR>\r
1127 # EfiBootServicesData 0x0010<BR>\r
1128 # EfiRuntimeServicesCode 0x0020<BR>\r
1129 # EfiRuntimeServicesData 0x0040<BR>\r
1130 # EfiConventionalMemory 0x0080<BR>\r
1131 # EfiUnusableMemory 0x0100<BR>\r
1132 # EfiACPIReclaimMemory 0x0200<BR>\r
1133 # EfiACPIMemoryNVS 0x0400<BR>\r
1134 # EfiMemoryMappedIO 0x0800<BR>\r
1135 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
1136 # EfiPalCode 0x2000<BR>\r
1137 # EfiPersistentMemory 0x4000<BR>\r
1138 # OEM Reserved 0x4000000000000000<BR>\r
1139 # OS Reserved 0x8000000000000000<BR>\r
1140 #\r
1141 # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>\r
1142 # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>\r
1143 #\r
1144 # e.g. 0x7FD5 can be used for all memory except Code. <BR>\r
1145 # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>\r
1146 #\r
1147 # @Prompt Set DXE memory protection policy.\r
1148 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048\r
1149\r
31122d8c 1150 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
5fc1ae69
DB
1151 # information that describes the path that contains zero or more PCI to PCI briges\r
1152 # followed by a PCI serial device. Each array entry is 4-bytes in length. The\r
1153 # first byte is the PCI Device Number, then second byte is the PCI Function Number,\r
1154 # and the last two bytes are the offset to the PCI power management capabilities\r
1155 # register used to manage the D0-D3 states. If a PCI power management capabilities\r
1156 # register is not present, then the last two bytes in the offset is set to 0. The\r
1157 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a\r
31122d8c
LG
1158 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
1159 # @Prompt Pci Serial Device Info\r
1160 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
1161\r
a59e2ede 1162 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
5fc1ae69 1163 # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that\r
a59e2ede
RN
1164 # describes the parameters of special PCI serial devices.\r
1165 # Each array entry is 24-byte in length. The array is terminated\r
1166 # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
1167 # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
ff3b043f
RN
1168 # The C style structure is defined as below:<BR>\r
1169 # typedef struct {<BR>\r
1170 # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
1171 # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
1172 # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
1173 # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
1174 # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
1175 # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
1176 # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1177 # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1178 # UINT8 Reserved[2];<BR>\r
1179 # } PCI_SERIAL_PARAMETER;<BR>\r
1180 # It contains zero or more instances of the above structure.<BR>\r
a59e2ede
RN
1181 # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
1182 # to contain two instances of the above structure, with the VendorId and DeviceId\r
1183 # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
1184 # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
1185 # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
1186 # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
1187 # instance equals to 0 and Offset of second one equals to a value bigger than or\r
ff3b043f 1188 # equal to 8.<BR>\r
a59e2ede
RN
1189 # For certain UART whose register needs to be accessed in DWORD aligned address,\r
1190 # RegisterStride equals to 4.\r
1191 # @Prompt Pci Serial Parameters\r
1192 gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
1193\r
5fc1ae69 1194 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.\r
35c77dae 1195 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
31122d8c 1196 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
5fc1ae69 1197\r
1d112229
RN
1198 ## This PCD points to the file name GUID of the BootManagerMenuApp\r
1199 # Platform can customize the PCD to point to different application for Boot Manager Menu\r
a9890ea5 1200 # @Prompt Boot Manager Menu File\r
1d112229
RN
1201 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
1202\r
1203 ## This PCD points to the formset GUID of the driver health management form\r
1204 # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
1205 # Platform can customize the PCD to point to different formset.\r
a9890ea5 1206 # @Prompt Driver Health Management Form\r
1d112229
RN
1207 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
1208\r
cd68e4a8
MK
1209 ## The number of bytes between registers in serial device. The default is 1 byte.\r
1210 # @Prompt Serial Port Register Stride in Bytes\r
1eb904a6 1211 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
5630cdfe 1212\r
1241af95
SZ
1213 ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
1214 # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
1215 # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
1216 # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
1217 gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
1218\r
f9bbb8d9
AB
1219 ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS\r
1220 # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h\r
1221 # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>\r
1222 # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>\r
1223 # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>\r
1224 # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>\r
1225 # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>\r
1226 # @Prompt Exposed ACPI table versions.\r
1227 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c\r
1228\r
b34e4461
GL
1229 ## This PCD defines the MAX repair count.\r
1230 # The default value is 0 that means infinite.\r
1231 # @Prompt MAX repair count\r
1232 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076\r
1233\r
df31cf84
JY
1234 ## Status Code for Capsule subclass definitions.<BR><BR>\r
1235 # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>\r
1236 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1237 # Override the value of this PCD in the platform DSC file as needed.\r
1238 # @Prompt Status Code for Capsule subclass definitions\r
1239 # @ValidList 0x80000003 | 0x00810000\r
1240 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100\r
1241\r
1242 ## Status Code for Capsule Process Begin.<BR><BR>\r
1243 # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>\r
1244 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1245 # Override the value of this PCD in the platform DSC file as needed.\r
1246 # @Prompt Status Code for Capsule Process Begin\r
1247 # @ValidList 0x80000003 | 0x00008001\r
1248 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101\r
1249\r
1250 ## Status Code for Capsule Process End.<BR><BR>\r
1251 # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>\r
1252 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1253 # Override the value of this PCD in the platform DSC file as needed.\r
1254 # @Prompt Status Code for Capsule Process End\r
1255 # @ValidList 0x80000003 | 0x00008002\r
1256 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102\r
1257\r
1258 ## Status Code for Capsule Process Updating Firmware.<BR><BR>\r
1259 # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>\r
1260 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1261 # Override the value of this PCD in the platform DSC file as needed.\r
1262 # @Prompt Status Code for Capsule Process Updating Firmware\r
1263 # @ValidList 0x80000003 | 0x00008003\r
1264 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103\r
1265\r
1266 ## Status Code for Capsule Process Update Firmware Success.<BR><BR>\r
1267 # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>\r
1268 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1269 # Override the value of this PCD in the platform DSC file as needed.\r
1270 # @Prompt Status Code for Capsule Process Update Firmware Success\r
1271 # @ValidList 0x80000003 | 0x00008004\r
1272 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104\r
1273\r
1274 ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>\r
1275 # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>\r
1276 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1277 # Override the value of this PCD in the platform DSC file as needed.\r
1278 # @Prompt Status Code for Capsule Process Update Firmware Failed\r
1279 # @ValidList 0x80000003 | 0x00008005\r
1280 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105\r
1281\r
1282 ## Status Code for Capsule Resetting System.<BR><BR>\r
1283 # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>\r
1284 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1285 # Override the value of this PCD in the platform DSC file as needed.\r
1286 # @Prompt Status Code for Capsule Resetting System\r
1287 # @ValidList 0x80000003 | 0x00008006\r
1288 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106\r
1289\r
1290 ## CapsuleMax value in capsule report variable.\r
1291 # @Prompt CapsuleMax value in capsule report variable.\r
1292 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107\r
1293\r
be046357 1294[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
fe44bae5
SZ
1295 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
1296 # This PCD could be set to 0 then console output would be at max column and max row.\r
1297 # @Prompt Console output row.\r
4bfa7dc4 1298 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 1299\r
60d73737 1300 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
fe44bae5
SZ
1301 # This PCD could be set to 0 then console output would be at max column and max row.\r
1302 # @Prompt Console output column.\r
4e17cc90 1303 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 1304\r
b9b5e307 1305 ## This PCD defines the video horizontal resolution.\r
fe44bae5
SZ
1306 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1307 # @Prompt Video horizontal resolution.\r
b9b5e307 1308 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
1309\r
1310 ## This PCD defines the video vertical resolution.\r
fe44bae5
SZ
1311 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1312 # @Prompt Video vertical resolution.\r
b9b5e307 1313 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
1314\r
4e5c0d12
RN
1315 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
1316 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
1317 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
1318 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
1319 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
1320 # for text setup.\r
1321\r
1322 ## Specify the video horizontal resolution of text setup.\r
1323 # @Prompt Video Horizontal Resolution of Text Setup\r
1324 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
1325\r
1326 ## Specify the video vertical resolution of text setup.\r
1327 # @Prompt Video Vertical Resolution of Text Setup\r
1328 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
1329\r
1330 ## Specify the console output column of text setup.\r
1331 # @Prompt Console Output Column of Text Setup\r
1332 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
1333\r
1334 ## Specify the console output row of text setup.\r
1335 # @Prompt Console Output Row of Text Setup\r
1336 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
1337\r
fe44bae5 1338[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
b2a41b1e
RN
1339 ## UART clock frequency is for the baud rate configuration.\r
1340 # @Prompt Serial Port Clock Rate.\r
1341 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
1342\r
5e30b69e
DB
1343 ## This PCD points to the front page formset GUID\r
1344 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
a9890ea5 1345 # @Prompt Front Page Formset.\r
5e30b69e
DB
1346 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
1347\r
fe44bae5
SZ
1348 ## Base address of the NV variable range in flash device.\r
1349 # @Prompt Base address of flash NV variable range.\r
a86ae184 1350 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 1351\r
fe44bae5
SZ
1352 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
1353 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1354 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1355 # be reflushed through the manner of fault tolerant write.\r
1356 # @Prompt Size of flash NV variable range.\r
1357 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
1358\r
2c4b18e0 1359 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1360 # @Prompt Base address of flash FTW spare block range.\r
73850864 1361 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
1362\r
fe44bae5
SZ
1363 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
1364 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1365 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1366 # be reflushed through the manner of fault tolerant write.\r
1367 # @Prompt Size of flash FTW spare block range.\r
1368 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
1369\r
a86ae184 1370 ## Base address of the FTW working block range in flash device.\r
0d3edd9d 1371 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1372 # @Prompt Base address of flash FTW working block range.\r
73850864 1373 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
1374\r
fe44bae5 1375 ## Size of the FTW working block range.\r
0d3edd9d
SZ
1376 # If the value is less than one block size, the work space range should not span blocks.\r
1377 # If the value is larger than one block size, it should be block size aligned.\r
fe44bae5
SZ
1378 # @Prompt Size of flash FTW working block range.\r
1379 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
1380\r
1381 ## 64-bit Base address of the NV variable range in flash device.\r
1382 # @Prompt 64-bit Base address of flash NV variable range.\r
92a4f6f3 1383 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
1384\r
2c4b18e0 1385 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1386 # @Prompt 64-bit Base address of flash FTW spare block range.\r
92a4f6f3 1387 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
1388\r
1389 ## 64-bit Base address of the FTW working block range in flash device.\r
0d3edd9d 1390 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1391 # @Prompt 64-bit Base address of flash FTW working block range.\r
92a4f6f3 1392 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
1393\r
fe44bae5
SZ
1394 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
1395 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
1396 # @Prompt Reserved memory range for EMU variable NV storage.\r
02328a57 1397 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
1398\r
a90ccab8 1399 ## This PCD defines the times to print hello world string.\r
fe44bae5
SZ
1400 # This PCD is a sample to explain UINT32 PCD usage.\r
1401 # @Prompt HellowWorld print times.\r
4e17cc90 1402 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 1403\r
fe44bae5
SZ
1404 ## This PCD defines the HelloWorld print string.\r
1405 # This PCD is a sample to explain String typed PCD usage.\r
1406 # @Prompt HelloWorld print string.\r
1407 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
1408\r
1409 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
73850864 1410 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
fe44bae5 1411 # @Prompt Max size of populated capsule.\r
4e17cc90 1412 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 1413\r
fe44bae5 1414 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
0ef42f88 1415 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
fe44bae5 1416 # @Prompt Max size of non-populated capsule.\r
4e17cc90 1417 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 1418\r
fe44bae5
SZ
1419 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
1420 # @Prompt Firmware vendor.\r
e026f005 1421 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 1422\r
fe44bae5
SZ
1423 ## Firmware revision that is the default revision filled into the EFI System Table.\r
1424 # @Prompt Firmware revision.\r
6144e7af 1425 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
1426\r
fe44bae5
SZ
1427 ## Null-terminated Unicode string that describes the firmware version.\r
1428 # @Prompt Firmware version string.\r
73850864 1429 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
1430\r
fe44bae5
SZ
1431 ## Null-terminated Unicode string that contains the date the firmware was released\r
1432 # @Prompt Firmware release data string.\r
6144e7af 1433 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
1434\r
fe44bae5
SZ
1435 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
1436 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
1437 # The default value in PeiPhase is 1 KBytes.<BR>\r
1438 # The default value in DxePhase is 128 KBytes.<BR>\r
1439 # @Prompt StatusCode memory size.\r
10c5d87e 1440 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
1441\r
fe44bae5
SZ
1442 ## Indicates if to reset system when memory type information changes.<BR><BR>\r
1443 # TRUE - Resets system when memory type information changes.<BR>\r
1444 # FALSE - Does not reset system when memory type information changes.<BR>\r
1445 # @Prompt Reset on memory type information change.\r
dad63934
RN
1446 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
1447\r
f0a1bf11 1448 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
fe44bae5
SZ
1449 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1450 # 0x00 (EFI_BLACK)<BR>\r
1451 # 0x01 (EFI_BLUE)<BR>\r
1452 # 0x02 (EFI_GREEN)<BR>\r
1453 # 0x03 (EFI_CYAN)<BR>\r
1454 # 0x04 (EFI_RED)<BR>\r
1455 # 0x05 (EFI_MAGENTA)<BR>\r
1456 # 0x06 (EFI_BROWN)<BR>\r
1457 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1458 # 0x08 (EFI_DARKGRAY)<BR>\r
1459 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1460 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1461 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1462 # 0x0C (EFI_LIGHTRED)<BR>\r
1463 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1464 # 0x0E (EFI_YELLOW)<BR>\r
1465 # 0x0F (EFI_WHITE)<BR>\r
1466 # @Prompt Foreground color for browser subtile.\r
1467 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1468 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
5fc1ae69 1469\r
f0a1bf11 1470 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
fe44bae5
SZ
1471 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1472 # 0x00 (EFI_BLACK)<BR>\r
1473 # 0x01 (EFI_BLUE)<BR>\r
1474 # 0x02 (EFI_GREEN)<BR>\r
1475 # 0x03 (EFI_CYAN)<BR>\r
1476 # 0x04 (EFI_RED)<BR>\r
1477 # 0x05 (EFI_MAGENTA)<BR>\r
1478 # 0x06 (EFI_BROWN)<BR>\r
1479 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1480 # 0x08 (EFI_DARKGRAY)<BR>\r
1481 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1482 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1483 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1484 # 0x0C (EFI_LIGHTRED)<BR>\r
1485 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1486 # 0x0E (EFI_YELLOW)<BR>\r
1487 # 0x0F (EFI_WHITE)<BR>\r
1488 # @Prompt Foreground color for browser field.\r
1489 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1490 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
5fc1ae69 1491\r
f0a1bf11 1492 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ
1493 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
1494 # 0x00 (EFI_BLACK)<BR>\r
1495 # 0x01 (EFI_BLUE)<BR>\r
1496 # 0x02 (EFI_GREEN)<BR>\r
1497 # 0x03 (EFI_CYAN)<BR>\r
1498 # 0x04 (EFI_RED)<BR>\r
1499 # 0x05 (EFI_MAGENTA)<BR>\r
1500 # 0x06 (EFI_BROWN)<BR>\r
1501 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1502 # 0x08 (EFI_DARKGRAY)<BR>\r
1503 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1504 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1505 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1506 # 0x0C (EFI_LIGHTRED)<BR>\r
1507 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1508 # 0x0E (EFI_YELLOW)<BR>\r
1509 # 0x0F (EFI_WHITE)<BR>\r
1510 # @Prompt Foreground color for highlighted browser field.\r
1511 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1512 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
5fc1ae69 1513\r
f0a1bf11 1514 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ
1515 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
1516 # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
1517 # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
1518 # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
1519 # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
1520 # 0x40 (EFI_BACKGROUND_RED)<BR>\r
1521 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
1522 # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
1523 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
1524 # @Prompt Background color for highlighted browser field.\r
1525 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
f0a1bf11
LG
1526 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
1527\r
ea060cfa 1528 ## Time in second to delay for SATA devices to spin-up for recovery.\r
fe44bae5 1529 # @Prompt SATA spin-up delay time in second for recovery path.\r
ea060cfa 1530 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
1531\r
960f2d53
SZ
1532 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
1533 # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
1534 # When changing the value of this PCD, the platform developer should make sure the memory size is\r
1535 # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
fe44bae5 1536 # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
88d20adc 1537 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
1538\r
ab7017fe 1539 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
fe44bae5
SZ
1540 # The default size is 32K. When changing the value of this PCD, the platform developer should\r
1541 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
1542 # @Prompt Stack size for CapsulePei transfer to long mode.\r
6bea3336 1543 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
ab7017fe 1544\r
fe44bae5
SZ
1545 ## Indicates if 1G page table will be enabled.<BR><BR>\r
1546 # TRUE - 1G page table will be enabled.<BR>\r
1547 # FALSE - 1G page table will not be enabled.<BR>\r
1548 # @Prompt Enable 1G page table support.\r
3ecd0155
JY
1549 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
1550\r
fe44bae5
SZ
1551 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
1552 # TRUE - Single Root I/O virtualization is supported.<BR>\r
1553 # FALSE - Single Root I/O virtualization is not supported.<BR>\r
1554 # @Prompt Enable SRIOV support.\r
1555 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
1556\r
1557 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
1558 # TRUE - Alternative Routing-ID is supported.<BR>\r
1559 # FALSE - Alternative Routing-ID is not supported.<BR>\r
1560 # @Prompt Enable ARI support.\r
1561 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
1562\r
1563 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
1564 # TRUE - Multi Root I/O virtualization is supported.<BR>\r
1565 # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
1566 # @Prompt Enable MRIOV support.\r
1567 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
1568\r
1569 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
1570 # BITN set indicates 2 of n+12 power<BR>\r
1571 # BIT0 set indicates 4KB alignment<BR>\r
1572 # BIT1 set indicates 8KB alignment<BR>\r
1573 # @Prompt SRIOV system page size.\r
1574 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
1575\r
35c77dae
LG
1576 ## SMBIOS version.\r
1577 # @Prompt SMBIOS version.\r
e1108d97 1578 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055\r
fe781940 1579\r
e63f3308
EL
1580 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1581 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
4fa7b3e2 1582 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A\r
e63f3308
EL
1583\r
1584 ## SMBIOS produce method.\r
1585 # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
1586 # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r
1587 # @Prompt The policy to produce SMBIOS entry point and table.\r
1588 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r
1589\r
fe44bae5
SZ
1590 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
1591 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
1592 # @Prompt Pad size for extension FPDT boot records.\r
1c0cc375
LG
1593 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
1594\r
fe44bae5
SZ
1595 ## Indicates if ConIn device are connected on demand.<BR><BR>\r
1596 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
1597 # by Consplitter should be called before any real key read operation.<BR>\r
1598 # FALSE - ConIn device may be connected normally during BDS.<BR>\r
1599 # @Prompt ConIn connect on demand.\r
838a9c58 1600 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
1601\r
fe44bae5
SZ
1602 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
1603 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
1604 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
1605 # @Prompt Enable ATA S.M.A.R.T feature.\r
0e185864 1606 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
1607\r
fe44bae5
SZ
1608 ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
1609 # TRUE - Full PCI enumeration is disabled.<BR>\r
1610 # FALSE - Full PCI enumeration is not disabled.<BR>\r
1611 # @Prompt Disable full PCI enumeration.\r
5624a27d
WL
1612 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
1613\r
fe44bae5 1614 ## Disk I/O - Number of Data Buffer block.\r
e645bd85 1615 # Define the size in block of the pre-allocated buffer. It provide better\r
fe44bae5
SZ
1616 # performance for large Disk I/O requests.\r
1617 # @Prompt Disk I/O - Number of Data Buffer block.\r
e645bd85
OM
1618 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
1619\r
0591696e
FT
1620 ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
1621 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
1622 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1623 # @Prompt Mmio base address of pci-based UFS host controller.\r
1624 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
1625\r
8d51e87d
CZ
1626 ## Specify Max ESRT cache entry number supported for FMP instances\r
1627 #\r
1628 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
1629 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
1630\r
1631 ## Specify Max ESRT cache entry number supported for Non FMP instances\r
1632 #\r
1633 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
1634 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
1635\r
1636 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
1637 #\r
1638 # @Prompt Flag to request system reboot after processing capsule.\r
1639 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
1640\r
03d486b2
JY
1641 ## Publish PropertiesTable or not.\r
1642 #\r
1643 # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
1644 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
1645 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
1646 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
1647 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
1648 #\r
1649 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
1650 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
1651 # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
1652 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
1653 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
1654 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
1655 #\r
1656 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
1657 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
1658 # section. If PE code/data sections are merged, the result is unpredictable.\r
1659 #\r
cc260e62
JY
1660 # UEFI 2.6 specification does not recommend to use this BIT0 attribute.\r
1661 #\r
03d486b2 1662 # @Prompt Publish UEFI PropertiesTable.\r
cc260e62 1663 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e\r
03d486b2 1664\r
f096950d
SZ
1665 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
1666 # @Prompt Default OEM ID for ACPI table creation.\r
1667 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
1668\r
1669 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
e90a0ee8 1670 # According to ACPI specification, this field is particularly useful when\r
44d1d2a8
JY
1671 # defining a definition block to distinguish definition block functions.\r
1672 # The OEM assigns each dissimilar table a new OEM Table ID.\r
1673 # This PCD is ignored for definition block.\r
f096950d
SZ
1674 # @Prompt Default OEM Table ID for ACPI table creation.\r
1675 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
1676\r
1677 ## Default OEM Revision for ACPI table creation.\r
e90a0ee8 1678 # According to ACPI specification, for LoadTable() opcode, the OS can also\r
44d1d2a8
JY
1679 # check the OEM Table ID and Revision ID against a database for a newer\r
1680 # revision Definition Block of the same OEM Table ID and load it instead.\r
1681 # This PCD is ignored for definition block.\r
f096950d
SZ
1682 # @Prompt Default OEM Revision for ACPI table creation.\r
1683 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
1684\r
1685 ## Default Creator ID for ACPI table creation.\r
e90a0ee8 1686 # According to ACPI specification, for tables containing Definition Blocks,\r
44d1d2a8
JY
1687 # this is the ID for the ASL Compiler.\r
1688 # This PCD is ignored for definition block.\r
f096950d
SZ
1689 # @Prompt Default Creator ID for ACPI table creation.\r
1690 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
1691\r
1692 ## Default Creator Revision for ACPI table creation.\r
e90a0ee8 1693 # According to ACPI specification, for tables containing Definition Blocks,\r
44d1d2a8
JY
1694 # this is the revision for the ASL Compiler.\r
1695 # This PCD is ignored for definition block.\r
f096950d
SZ
1696 # @Prompt Default Creator Revision for ACPI table creation.\r
1697 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
1698\r
901c58c5
LE
1699 ## Indicates if to set NX for stack.<BR><BR>\r
1700 # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
1701 # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
1702 # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
1703 # TRUE - to set NX for stack.<BR>\r
1704 # FALSE - Not to set NX for stack.<BR>\r
1705 # @Prompt Set NX for stack.\r
1706 gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
1707\r
48555339
FT
1708 ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.\r
1709 # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC\r
1710 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1711 # @Prompt Mmio base address of pci-based SD/MMC host controller.\r
1712 gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043\r
1713\r
11a291a4
SZ
1714 ## Indicates if ACPI S3 will be enabled.<BR><BR>\r
1715 # TRUE - ACPI S3 will be enabled.<BR>\r
1716 # FALSE - ACPI S3 will be disabled.<BR>\r
1717 # @Prompt ACPI S3 Enable.\r
1718 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
1719\r
bd890a73
SZ
1720 ## Specify memory size for boot script executor stack usage in S3 phase.\r
1721 # The default size 32K. When changing the value make sure the memory size is large enough \r
1722 # to meet boot script executor requirement in the S3 phase.\r
1723 # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
1724 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
1725\r
08a41a25
RN
1726 ## Indicates if to use the optimized timing for best PS2 detection performance.\r
1727 # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
1728 # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
1729 # FALSE - Use the normal timing to detect PS2.<BR>\r
1730 # @Prompt Enable fast PS2 detection\r
1731 gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
1732\r
08bec91e
JY
1733 ## This is recover file name in PEI phase.\r
1734 # The file must be in the root directory.\r
1735 # The file name must be the 8.3 format.\r
1736 # The PCD data must be in UNICODE format.\r
ea7dcfed 1737 # @Prompt Recover file name in PEI phase\r
08bec91e
JY
1738 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045\r
1739\r
df31cf84
JY
1740 ## This PCD hold a list GUIDs for the ImageTypeId to indicate the\r
1741 # FMP capsule is a system FMP.\r
1742 # @Prompt A list of system FMP ImageTypeId GUIDs\r
1743 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046\r
1744\r
e043f789
LD
1745 ## This PCD holds the address mask for page table entries when memory encryption is\r
1746 # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.\r
1747 # This mask should be applied when creating 1:1 virtual to physical mapping tables.\r
76081dfc 1748 # @Prompt The address mask when memory encryption is enabled.\r
e043f789
LD
1749 gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047\r
1750\r
097e8d68 1751[PcdsPatchableInModule]\r
fe44bae5
SZ
1752 ## Specify memory size with page number for PEI code when\r
1753 # Loading Module at Fixed Address feature is enabled.\r
1754 # The value will be set by the build tool.\r
1755 # @Prompt LMFA PEI code page number.\r
1756 # @ValidList 0x80000001 | 0\r
54ea99a7 1757 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
5fc1ae69 1758\r
fe44bae5
SZ
1759 ## Specify memory size with page number for DXE boot time code when\r
1760 # Loading Module at Fixed Address feature is enabled.\r
1761 # The value will be set by the build tool.\r
1762 # @Prompt LMFA DXE boot code page number.\r
1763 # @ValidList 0x80000001 | 0\r
54ea99a7 1764 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
5fc1ae69 1765\r
fe44bae5
SZ
1766 ## Specify memory size with page number for DXE runtime code when\r
1767 # Loading Module at Fixed Address feature is enabled.\r
1768 # The value will be set by the build tool.\r
1769 # @Prompt LMFA DXE runtime code page number.\r
1770 # @ValidList 0x80000001 | 0\r
54ea99a7 1771 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
5fc1ae69 1772\r
fe44bae5
SZ
1773 ## Specify memory size with page number for SMM code when\r
1774 # Loading Module at Fixed Address feature is enabled.\r
1775 # The value will be set by the build tool.\r
1776 # @Prompt LMFA SMM code page number.\r
1777 # @ValidList 0x80000001 | 0\r
54ea99a7 1778 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
1779\r
88d20adc 1780[PcdsDynamic, PcdsDynamicEx]\r
1781 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
1782 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1783 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1784 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ
1785 # @Prompt S3 Boot Script Table Private Data pointer.\r
1786 # @ValidList 0x80000001 | 0x0\r
88d20adc 1787 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
1788\r
3aa764ed
SZ
1789 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
1790 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1791 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1792 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ
1793 # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
1794 # @ValidList 0x80000001 | 0x0\r
3aa764ed
SZ
1795 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
1796\r
5fc1ae69 1797 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1\r
b5040e4c 1798 # Virtual to Physical mapping according to the processor physical address bits.\r
fe44bae5
SZ
1799 # @Prompt Identify Mapping Page Table pointer.\r
1800 # @ValidList 0x80000001 | 0x0\r
b5040e4c 1801 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
fe44bae5 1802\r
df31cf84
JY
1803 ## This dynamic PCD holds the information if there is any test key used by the platform.\r
1804 # @Prompt If there is any test key used by the platform.\r
1805 gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003\r
1806\r
fe44bae5
SZ
1807[UserExtensions.TianoCore."ExtraFiles"]\r
1808 MdeModulePkgExtra.uni\r