sfu5 [Thu, 13 Dec 2012 06:47:06 +0000 (06:47 +0000)]
1. Add EFI_COMPONENT_NAME2_PROTOCOL.GetControllerName() support.
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Wed, 12 Dec 2012 08:25:05 +0000 (08:25 +0000)]
Update PCD description.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Fan Jeff <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13992 6f19259b-4bc3-4df7-8a09-765794883524
darylm503 [Tue, 11 Dec 2012 21:19:14 +0000 (21:19 +0000)]
StdLib: Add terminal type line editing (Interactive IO) for console devices.
Adds a subset of the terminal I/O capabilities described in the Single Unix Specification, V4.
Supports:
Erase previous character. Default is Backspace or ^H
Erase line. Default is ^U
TAB characters are supported and, by default, are rendered as 8 spaces. They will still be read as a single TAB character.
Both Canonical and Non-Canonical modes are supported.
If a terminal device is opened with O_TTY_INIT in the mode, the device will be initialized to "sane" values for interactive use. It will be in Canonical mode, Enter will be translated to NewLine and on output, a NewLine is translated to CRLF. Echoing will be on, control characters are output as ^X, and TABs are expanded.
See the new <sys/termios.h> file for more information.
lzeng14 [Mon, 10 Dec 2012 12:54:02 +0000 (12:54 +0000)]
1. Update IoRead to support UINT64 also.
2. To be consistent, update PciCfgRead to support full S3BootScriptWidth(Uint8, FifoUint8 and FullUint8) like PciCfgWrite.
3. Use BuildLoopData() to get the addressStride and BufferStride to do PCI CFG operations.
4. Correct, refine and enhance some comments and debug messages.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13987 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Fri, 7 Dec 2012 07:56:59 +0000 (07:56 +0000)]
1. Duplicate the original boot script data copy, because it may have INSERT boot script at runtime in SMM. If so, we should use original copy to restore data after OS rewrites the ACPINvs region. Or the data inserted may cause some original boot script data lost.
2. Sync the change into LockBox for S3BootScriptMoveLastOpcode() at runtime in SMM.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13986 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Thu, 6 Dec 2012 01:15:40 +0000 (01:15 +0000)]
Multi-SMM drivers couldn't save their boot script successfully all at runtime in SMM, one module's boot script will overwrite another module's.
Allocate a SMM copy for private data structure, and use a new PCD PcdS3BootScriptTablePrivateSmmDataPtr to transfer and share data between multi-SMM drivers.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13984 6f19259b-4bc3-4df7-8a09-765794883524
jyao1 [Mon, 3 Dec 2012 01:06:28 +0000 (01:06 +0000)]
Fix build error.
ACPI4.0/5.0 have clear description:
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
jyao1 [Fri, 30 Nov 2012 09:03:15 +0000 (09:03 +0000)]
ACPI4.0/5.0 have clear description:
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
vanjeff [Wed, 28 Nov 2012 04:49:48 +0000 (04:49 +0000)]
Save/Restore missing volatile registers (XMM0-5) save/restore in Page Fault handler.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13974 6f19259b-4bc3-4df7-8a09-765794883524
jljusten [Tue, 27 Nov 2012 19:11:29 +0000 (19:11 +0000)]
QemuVideo: Add support for the bochs dispi interface
Add code to handle qemu-emulated vga cards supporting the bochs dispi
interface (standard vga, qxl vga). This requires qemu 1.3+ which
provides the bochs dispi interface data register on a aligned io
address. See
http://git.qemu.org/?p=qemu.git;a=commitdiff;h=df9ffb726ff13f850b8829be1bc85ed621b903ac
jljusten [Tue, 27 Nov 2012 19:11:11 +0000 (19:11 +0000)]
QemuVideo: prepare to support more hardware
Move to a table-driven hardware detection. Add a table with PCI IDs,
card name and variant enum. Use the table for hardware detection and
initialization. Rename Cirrus-specific data and code to carry "cirrus"
in the name.
czhang46 [Tue, 27 Nov 2012 05:16:15 +0000 (05:16 +0000)]
1.Measure ACPI table data comes from flash event type EV_POST_CODE ACPI DATA to PCR[0]
2.Re-measure ACPI table after fix up with event type EV_EFI_HANDOFF_TABLES to PCR[1]
czhang46 [Tue, 27 Nov 2012 05:14:11 +0000 (05:14 +0000)]
1.Measure ACPI table data comes from flash event type EV_POST_CODE ACPI DATA to PCR[0]
2.Re-measure ACPI table after fix up with event type EV_EFI_HANDOFF_TABLES to PCR[1]
tye1 [Thu, 22 Nov 2012 05:07:22 +0000 (05:07 +0000)]
Fix issue that RsaPkcs1Verify() may not work in PEI phase.
Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com> Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13958 6f19259b-4bc3-4df7-8a09-765794883524
sfu5 [Wed, 21 Nov 2012 08:06:02 +0000 (08:06 +0000)]
1. Correct the counter-based hash algorithm according to UEFI spec.
2. Check the reserverd bit in variable attribute.
3. Return EFI_OUT_OF_RESOURCE instead of EFI_SECURITY_VIOLATION if there is not enough speace to store the public key.
4. Fix a bug when deleting a non-existent time-based auth variable, we store the certificate into cert DB incorrectly.
5. Fix a bug that time-based auth variable can't been updated again after append operation.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Dong Guo <guo.dong@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13957 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Thu, 8 Nov 2012 01:12:56 +0000 (01:12 +0000)]
Build the registered guid HOB and SystemTable to record the GUID itself in PeiExtractGuidedSectionLib and DxeExtractGuidedSectionLib, and also state the restriction in BaseExtractGuidedSectionLib.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13930 6f19259b-4bc3-4df7-8a09-765794883524
jljusten [Fri, 2 Nov 2012 18:28:17 +0000 (18:28 +0000)]
OvmfPkg: Add support for qemu's -kernel parameter
If QEMU's -kernel parameter was used, then download the
kernel from the FwCfg interface, and launch it. (See -kernel,
-initrd, -append) The application uses the LoadLinuxLib to boot
the kernel image.
jljusten [Fri, 2 Nov 2012 18:26:30 +0000 (18:26 +0000)]
OvmfPkg: Add Linux bzimage include file
This file is from the efilinux project where it resides
under the path loaders/bzimage/bzimage.h.
git://git.kernel.org/pub/scm/boot/efilinux/efilinux.git
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Matt Fleming <matt.fleming@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13920 6f19259b-4bc3-4df7-8a09-765794883524
niruiyu [Fri, 2 Nov 2012 06:13:14 +0000 (06:13 +0000)]
Add missing PCI class code definition.
PCI22/PCI23/PCI30 spec were reviewed and the missing definitions were added to accordingly Pci22.h/Pci23.h/Pci30.h.
All other class code definitions that are not defined in PCI Local Bus specification but in PCI Code and ID Assignment specification are defined in PciCodeId.h.
tye1 [Mon, 29 Oct 2012 05:20:18 +0000 (05:20 +0000)]
Fix issue that ifconfig –c cannot clear IP address details.
Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fan Jeff <jeff.fan@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13885 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Thu, 25 Oct 2012 06:26:39 +0000 (06:26 +0000)]
Create a MAX_TIMER_TICK_DURATION for the error handling in 8254 timer module.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Tian Hot <hot.tian@intel.com> Reviewed-by: Zeng Star <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13884 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Thu, 25 Oct 2012 06:16:14 +0000 (06:16 +0000)]
Add uninstalling GOP and UGA protocol in Consplitter Stop ().
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Tian Hot <hot.tian@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13883 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin [Mon, 22 Oct 2012 14:01:38 +0000 (14:01 +0000)]
ArmPlatformPkg/Scripts: Added ARM DS-5 scripts to debug UEFI
These scripts allow to automatically load the symbols using either the
report file created by the BaseTools or using the memory regions
defined in the arguments.
This is the scripts for DS-5 prior to DS5 v5.12.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13874 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin [Fri, 19 Oct 2012 09:47:49 +0000 (09:47 +0000)]
EmbeddedPkg/MmcDxe: Ensure MMC is in Identification Mode
This change ensure the MMC card is in Identification Mode.
The card might be in Data Transfer Mode if a pre UEFI Boot Loader
had initialized the card.
A potential optimization would be to skip the Identification Mode
in this case.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13872 6f19259b-4bc3-4df7-8a09-765794883524
projects / mirror_edk2.git / log