Function of UpdatePciInfo() in PciEnumeratorSupport.c is used to update
the bar information for those incompatible PCI device. It is the right
place to check if the OptionRom need to be ignored.
According to "Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor
Usage" in PI Spec 1.7, Type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM (do not probe option
rom BAR).
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Host VMM may inject OptionRom which is untrusted in Td guest. So PCI
OptionRom needs to be ignored if it is Td guest. According to
"Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage"
PI spec 1.7, type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MMIO64_PREFERENCE is a fixed length data structure which contains one
AddressSpaceDesc and one EndDesc. This patch removes MMIO64_PREFERENCE
and create AddressSpaceDesc and EndDesc respectively. This change
gives the chance to add more AddressSpaceDesc when CheckDevice is
called.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
The entrypoint of DxeAcpiTimerLib checks HostBridgeDevId by reading
PcdOvmfHostBridgePciDevId. If the DevId is not set, ASSERT is
triggered. Normally this DevId is set in PlatformPei which is executed
in PEI phase.
This patch-set is introducing PEI-less boot which means PEI phase is
skipped. So there is no chance to set this DevId. Instead HostBridgeDevId
is set in PlatformInfoHob. So we can check if PlatformInfoHob exists and
if HostBridgeDevId is set in this Hob.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TDX_PEI_LESS_BOOT indicates the boot without PEI phase. In this case
settings in EFI_HOB_PLATFORM_INFO should be set to its according PCDs.
TdxDxe driver is workable for both Legacy guest and Tdx guest. It is
because for Legacy guest (in PEI-less boot) there should be a place
to set the PCDs based on EFI_HOB_PLATFORM_INFO hob. TdxDxe driver is
the right place to do this work.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
OvmfPkg/IntelTdx/Sec is a simplied version of OvmfPkg/Sec. There
are below differences between these 2 Sec
- IntelTdx/Sec only supports Legacy guest and Tdx guest in X64.
- IntelTdx/Sec calls PeilessStartup () to jump from SEC to DXE directly.
- IntelTdx/Sec uses MemoryAllocationLib / HobLib / PrePiLib in
EmbeddedPkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
PeilessStarupLib provides a function (PeilessStartup) which brings
up both Legacy and Tdx guest from SEC phase to DXE phase. PEI phase
is skipped so that the attack surfaces are reduced as much as possible.
PeilessStartup() does below tasks:
1. Contruct the FW hoblist.
Since PEI is skipped, we must find a memory region which is the
largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
2. Initialize the platform.
3. Build various Hobs, such as SecFv Hob, DxeFv Hob, Stack Hob, etc.
4. At last DXE Core is located / loaded and transfer control to it.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
This library sets / gets the Hob list pointer in TDX_WORK_AREA.
This is because it is designed to be used in SEC where the value of
global variable cannot be saved, so the Hob list pointer is saved
in TDX_WORK_AREA.
TDX_WORK_AREA shares the same base address as SEV_WORK_AREA which is
pointed by PcdSevEsWorkAreaBase. This PCD will be renamed to
PcdCcWorkAreaBase as Gerd suggested.
See https://edk2.groups.io/g/devel/message/86642
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Discussion in https://bugzilla.tianocore.org/show_bug.cgi?id=1496 shows
that 8254TimerDxe was not written for OVMF. It was moved over from
PcAtChipsetPkg to OvmfPkg in 2019. Probably because OVMF was the only
user left.
Most likely the reason OVMF used 8254TimerDxe initially was that it could
just use the existing driver in PcAtChipsetPkg. And it simply hasn't
been changed ever.
CSM support was moved in 2019 too. (CSM support depends on 8254/8259
drivers). So 8254TimerDxe will be used when CSM_ENABLE=TRUE.
There are 4 .dsc which include the 8254Timer.
- OvmfPkg/AmdSev/AmdSevX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
For the three OvmfPkg* configs using 8254TimerDxe with CSM_ENABLE=TRUE
and LapicTimerDxe otherwise.
For the AmdSev config it doesn't make sense to support a CSM. So use
the lapic timer unconditionally.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Per SDM, changing the mode of APIC timer (from one-shot to periodic or
vice versa) by writing to the timer LVT entry does not start the timer.
To start the timer, it is necessary to write to the initial-count
register.
If initial-count is wrote before mode change, it's possible that timer
expired before the mode change. Thus failing the periodic mode.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Julien Grall <julien@xen.org> Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
The current IoMmuDxe driver supports DMA operations inside SEV guest.
To support DMA operation in TDX guest,
CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr) is used to determine
if it is SEV guest or TDX guest.
Due to security reasons all DMA operations inside the SEV/TDX guest must
be performed on shared pages. The IOMMU protocol driver for the SEV/TDX
guest uses a bounce buffer to map guest DMA buffer to shared pages in
order to provide the support for DMA operations inside SEV/TDX guest.
The call of SEV or TDX specific function to set/clear EncMask/SharedBit
is determined by CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdxDxe driver is dispatched early in DXE, due to being list in APRIORI.
This module is responsible for below features:
- Sets max logical cpus based on TDINFO
- Sets PCI PCDs based on resource hobs
- Set shared bit in MMIO region
- Relocate Td mailbox and set its address in MADT table.
1. Set shared bit in MMIO region
Qemu allows a ROM device to set to ROMD mode (default) or MMIO mode.
When it is in ROMD mode, the device is mapped to guest memory and
satisfies read access directly.
In EDK2 Option ROM is treated as MMIO region. So Tdx guest access
Option ROM via TDVMCALL(MMIO). But as explained above, since Qemu set
the Option ROM to ROMD mode, the call of TDVMCALL(MMIO) always return
INVALID_OPERAND. Tdvf then falls back to direct access. This requires
to set the shared bit to corresponding PageTable entry. Otherwise it
triggers GP fault.
TdxDxe's entry point is the right place to set the shared bit in MMIO
region because Option ROM has not been discoverd yet.
2. Relocate Td mailbox and set the new address in MADT Mutiprocessor
Wakeup Table.
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
TdxDxe registers for protocol notification
(gQemuAcpiTableNotifyProtocolGuid) to call the AlterAcpiTable(), in
which MADT table is altered by the above Mailbox address. The protocol
will be installed in AcpiPlatformDxe when the MADT table provided by
Qemu is ready. This is to maintain the simplicity of the AcpiPlatformDxe.
AlterAcpiTable is the registered function which traverses the ACPI
table list to find the original MADT from Qemu. After the new MADT is
configured and installed, the original one will be uninstalled.
Add Intel Tdx helper library. The library provides the routines to:
- set or clear Shared bit for a given memory region.
- query whether TDX is enabled.
Please be noted, there a lot of duplicated codes for Page Table
operations. These codes should be moved to a common library
(PageTablesLib) so that it is more friendly for review and maintain.
There is a new feature requirement
https://bugzilla.tianocore.org/show_bug.cgi?id=847 which is to
implement the library. After the lib is introduced, BaseMemEncryptTdxLib
will be refactored.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
To maintain the simplicity of the AcpiPlatformDxe, the MADT ACPI table
will be altered in another driver (TdxDxe) by installing a protocol
to notify that the ACPI table provided by Qemu is ready. Then in TdxDxe
a notification functioin will be called to alter the MADT table to recorded
the mailbox address.
The protocol is gQemuAcpiTableNotifyProtocolGuid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
OvmfPkg/PlatformPei is updated to support Tdx guest. There are below
major changes.
- Set Tdx related PCDs
- Publish Tdx RamRegions
In this patch there is another new function BuildPlatformInfoHob ().
This function builds EFI_HOB_PLATFORM_INFO which contains the
HostBridgeDevId. The hob is built in both Td guest and Non-Td guest.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
There are below changes in PlatformInitLib for Tdx guest:
1. Publish ram regions
In Tdx guest, the system memory is passed in TdHob by host VMM. So
the major task of PlatformTdxPublishRamRegions is to walk thru the
TdHob list and transfer the ResourceDescriptorHob and MemoryAllocationHob
to the hobs in DXE phase.
2. Build MemoryAllocationHob for Tdx Mailbox and Ovmf work area.
3. Update of PlatformAddressWidthInitialization. The physical
address width that Tdx guest supports is either 48 or 52.
4. Update of PlatformMemMapInitialization.
0xA0000 - 0xFFFFF is VGA bios region. Platform initialization marks the
region as MMIO region. Dxe code maps MMIO region as IO region.
As TDX guest, MMIO region is maps as shared. However VGA BIOS doesn't need
to be shared. Guest TDX Linux maps VGA BIOS as private and accesses for
BIOS and stuck on repeating EPT violation. VGA BIOS (more generally ROM
region) should be private. Skip marking VGA BIOA region [0xa000, 0xfffff]
as MMIO in HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MMIO region in Tdx guest is set with PcdTdxSharedBitMask in TdxDxe's
entry point. In SEV guest the page table entries is set with
PcdPteMemoryEncryptionAddressOrMask when creating 1:1 identity table.
So the AddressEncMask in GetPageTableEntry (@CpuPageTable.c) is either
PcdPteMemoryEncryptionAddressOrMask (in SEV guest), or
PcdTdxSharedBitMask (in TDX guest), or all-0 (in Legacy guest).
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Guest Physical Address (GPA) space in Td guest is divided into private
and shared sub-spaces, determined by the SHARED bit of GPA. This PCD
holds the shared bit mask. Its default value is 0 and it will be set
in PlatformPei driver if it is of Td guest.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
If TDX is enabled then we do not support DMA operation in PEI phase.
This is mainly because DMA in TDX guest requires using bounce buffer
(which need to allocate dynamic memory and allocating a PAGE size'd
buffer can be challenge in PEI phase).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
1. SecEntry.nasm
In TDX BSP and APs goes to the same entry point in SecEntry.nasm.
BSP initialize the temporary stack and then jumps to SecMain, just as
legacy Ovmf does.
APs spin in a modified mailbox loop using initial mailbox structure.
Its structure defition is in OvmfPkg/Include/IndustryStandard/IntelTdx.h.
APs wait for command to see if the command is for me. If so execute the
command.
2. Sec/SecMain.c
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the major task of this patch is to process the TdHobList
to accept the memory. After that TDVF follow the standard OVMF flow
and jump to PEI phase.
PcdUse1GPageTable is set to FALSE by default in OvmfPkgX64.dsc. It gives
no chance for Intel TDX to support 1G page table. To support 1G page
table this PCD is set to TRUE in OvmfPkgX64.dsc.
TDX_GUEST_SUPPORTED is defined in OvmfPkgX64.dsc. This macro wraps the
Tdx specific code.
TDX only works on X64, so the code is only valid in X64 arch.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Declare the local variables in SecCoreStartupWithStack that actually
move the data elements as volatile to prevent the optimizer from
replacing this function with the intrinsic memcpy().
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the newly added function (ProcessTdxHobList) is to process
the TdHobList to accept the memory. Because TdHobList is provided by
host VMM which is not trusted, so its content should be checked before
it is consumed by TDVF.
Because ProcessTdxHobList is to be called in SEC phase, so
PlatformInitLib.inf is updated to support SEC.
Note: In this patch it is BSP which accepts the pages. So there maybe
boot performance issue. There are some mitigations to this issue, such
as lazy accept, 2M accept page size, etc. We will re-visit here in the
future.
EFI_RESOURCE_MEMORY_UNACCEPTED is a new ResourceType in
EFI_HOB_RESOURCE_DESCRIPTOR. It is defined for the unaccepted memory
passed from Host VMM. This is proposed in microsoft/mu_basecore#66
files#diff-b20a11152d1ce9249c691be5690b4baf52069efadf2e2546cdd2eb663d80c9
e4R237 according to UEFI-Code-First. The proposal was approved in 2021
in UEFI Mantis, and will be added to the new PI.next specification.
Per the MdePkg reviewer's comments, before this new ResourceType is
added in the PI spec, it should not be in MdePkg. So it is now
defined as an internal implementation and will be moved to
MdePkg/Include/Pi/PiHob.h after it is added in PI spec.
See https://edk2.groups.io/g/devel/message/87641
PcdTdxAcceptPageSize is added for page accepting. Currently TDX supports
4K and 2M accept page size. The default value is 2M.
Tdx guest is only supported in X64. So for IA32 ProcessTdxHobList
just returns EFI_UNSUPPORTED.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MiscInitialization is split into 2 functions:
- PlatformMiscInitialization is for PlatformInitLib.
- MiscInitialization calls PlatformMiscInitialization and then sets
PCD. It is for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
NoexecDxeInitialization is split into 2 functions:
- PlatformNoexecDxeInitialization is for PlatformInitLib
- NoexecDxeInitialization calls PlatformNoexecDxeInitialization and
then sets PCD.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MemMapInitialization is split into 2 functions:
- PlatformMemMapInitialization is for PlatformInfoLib
- MemMapInitialization calls PlatformMemMapInitialization and then
sets PCDs. It is for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MaxCpuCountInitialization is splitted into two:
- PlatformMaxCpuCountInitialization is for PlatformInitLib
- MaxCpuCountInitialization is for PlatformPei. It calls
PlatformMaxCpuCountInitialization then sets PCDs.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
From this patch we start to restruct the functions which set PCDs into
two, one for PlatformInitLib, one for PlatformPei.
AddressWidthInitialization is the first one. It is splitted into two:
- PlatformAddressWidthInitialization is for PlatformInitLib
- AddressWidthInitialization is for PlatformPei. It calls
PlatformAddressWidthInitialization then set PCDs.
Below functions are also refined for PlatformInitLib:
- PlatformScanOrAdd64BitE820Ram
- PlatformGetSystemMemorySizeAbove4gb
- PlatformGetFirstNonAddress
All the SetPcd codes are removed from above functions.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Refactor MiscInitialization for CloudHV to set PCD as other platforms
do. Because in the following patch we will split the functions which
set PCDs into two, one for PlatformInitLib, one for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
In MiscInitialization Microvm looks a little weird. Other platforms
call PcdSet16S to set the PcdOvmfHostBridgePciDevId with the value same
as PlatformInfoHob->HostBridgeDevId. But Microvm doesn't follow this
way. In switch-case 0xffff is Microvm, but set with
MICROVM_PSEUDO_DEVICE_ID. So we have to add a new function
( MiscInitializationForMicrovm ) for Microvm and delete the code in
MiscInitialization.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
The intention of PlatformInitLib is to extract the common function used
in OvmfPkg/PlatformPei. This lib will be used not only in PEI phase but
also in SEC phase. SEC phase cannot use global variables between
different functions. So PlatformInfoHob is created to hold the
informations shared between functions. For example, HostBridgeDevId
corespond to mHostBridgeDevId in PlatformPei.
In this patch we will first move below global variables to
PlatformInfoHob.
- mBootMode
- mS3Supported
- mPhysMemAddressWidth
- mMaxCpuCount
- mHostBridgeDevId
- mQ35SmramAtDefaultSmbase
- mQemuUc32Base
- mS3AcpiReservedMemorySize
- mS3AcpiReservedMemoryBase
PlatformInfoHob also holds other information, for example,
PciIoBase / PciIoSize. This is because in SEC phase, PcdSetxxx
doesn't work. So we will restruct the functions which set PCDs
into two, one for PlatformInfoLib, one for PlatformPei.
So in this patch we first move global variables and PCDs to
PlatformInfoHob. All the changes are in OvmfPkg/PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
In this patch of PlatformInitLib, below hob functions are introduced:
- PlatformAddIoMemoryBaseSizeHob
- PlatformAddIoMemoryRangeHob
- PlatformAddMemoryBaseSizeHob
- PlatformAddMemoryRangeHob
- PlatformAddReservedMemoryBaseSizeHob
They correspond the below functions in OvmfPkg/PlatformPei:
- AddIoMemoryBaseSizeHob
- AddIoMemoryRangeHob
- AddMemoryBaseSizeHob
- AddMemoryRangeHob
- AddReservedMemoryBaseSizeHob
After above hob functions are introduced in PlatformInitLib,
OvmfPkg/PlatformPei is refactored with this library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
There are 3 variants of PlatformPei in OvmfPkg:
- OvmfPkg/PlatformPei
- OvmfPkg/XenPlatformPei
- OvmfPkg/Bhyve/PlatformPei/PlatformPei.inf
These PlatformPeis can share many common codes, such as
Cmos / Hob / Memory / Platform related functions. This commit
(and its following several patches) are to create a PlatformInitLib
which wraps the common code called in above PlatformPeis.
In this initial version of PlatformInitLib, below Cmos related functions
are introduced:
- PlatformCmosRead8
- PlatformCmosWrite8
- PlatformDebugDumpCmos
They correspond to the functions in OvmfPkg/PlatformPei:
- CmosRead8
- CmosWrite8
- DebugDumpCmos
Considering this PlatformInitLib will be used in SEC phase, global
variables and dynamic PCDs are avoided. We use PlatformInfoHob
to exchange information between functions.
EFI_HOB_PLATFORM_INFO is the data struct which contains the platform
information, such as HostBridgeDevId, BootMode, S3Supported,
SmmSmramRequire, etc.
After PlatformInitLib is created, OvmfPkg/PlatformPei is refactored
with this library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
In Tdx BSP may issues commands to APs for some task, for example, to
accept pages paralelly. BSP also need to wait until all the APs have
done the task. TdxMailboxLib wraps these common funtions for BSP.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
In TDVF BSP and APs are simplified. BSP is the vCPU-0, while the others
are treated as APs.
So MP intialization is rather simple. ApWorker is not supported, BSP is
always the working processor, while the APs are just in a
wait-for-precedure state.
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MSR is accessed in BaseXApicX2ApicLib. In TDX some MSRs are accessed
directly from/to CPU. Some should be accessed via explicit requests
from the host VMM using TDCALL(TDG.VP.VMCALL). This is done by the
help of TdxLib.
Please refer to [TDX] Section 18.1
TDX: https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-module-1.0-public-spec-v0.931.pdf
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Previously IoFifo functions are in X64/IoFifoSev.nasm which supports
both SEV guest and Legacy guest. IoLibFifo.c is introduced to support
SEV/TDX/Legacy guest in one binary. It checks the guest type in runtime
and call corresponding functions then.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TDVF access MMIO with TDG.VP.VMCALL to invoke VMM provided emulation
functions. If the access to MMIO fails, it fall backs to the direct
access.
BaseIoLibIntrinsic.inf is the IoLib used by other packages. It will
not support I/O in Td guest. But some files are shared between
BaseIoLibIntrinsic and BaseIoLibIntrinsicSev (IoLib.c is the example). So
IoLibInternalTdxNull.c (which holds the null stub of the Td I/O routines)
is included in BaseIoLibIntrinsic.inf. BaseIoLibIntrinsic.inf doesn't
import TdxLib so that the Pkgs which include BaseIoLibIntrinsic.inf
need not include TdxLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Intel TDX architecture does not prescribe a specific software convention
to perform I/O from the guest TD. Guest TD providers have many choices to
provide I/O to the guest. The common I/O models are emulated devices,
para-virtualized devices, SRIOV devices and Direct Device assignments.
TDVF chooses para-virtualized I/O (Choice-A) which use the TDG.VP.VMCALL
function to invoke the funtions provided by the host VMM to perform I/O.
Another choice (Choice-B) is the emulation performed by the #VE handler.
There are 2 benefits of para-virtualized I/O:
1. Performance.
VMEXIT/VMENTRY is skipped so that the performance is better than #VE
handler.
2. De-couple with #VE handler.
Choice-B depends on the #VE handler which means I/O is not available
until #VE handler is installed. For example, in PEI phase #VE handler
is installed in CpuMpPei, while communication with Qemu (via I/O port)
happen earlier than it.
IoLibInternalTdx.c provides the helper functions for Tdx guest.
IoLibInternalTdxNull.c provides the null version of the helper functions.
It is included in the Non-X64 IoLib so that the build will not be broken.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Add base support to handle #VE exceptions. Update the common exception
handlers to invoke the VmTdExitHandleVe () function of the VmgExitLib
library when a #VE is encountered. A non-zero return code will propagate
to the targeted exception handler.
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
The base VmgExitLib library provides a default limited interface to
handle #VE exception. To provide full support, the OVMF version of
VmgExitLib is extended to provide full support of #VE handler.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
VmgExitLib performs the necessary processing to handle a #VC exception.
VmgExitLibNull is a NULL instance of VmgExitLib which provides a
default limited interface. In this commit VmgExitLibNull is extended to
handle a #VE exception with a default limited interface. A full feature
version of #VE handler will be created later.
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdxLib is created with functions to perform the related Tdx operation.
This includes functions for:
- TdAcceptPages : Accept pending private pages and initialize the pages
to all-0 using the TD ephemeral private key.
- TdExtendRtmr : Extend measurement to one of the RTMR registers.
- TdSharedPageMask: Get the Td guest shared page mask which indicates it
is a Shared or Private page.
- TdMaxVCpuNum : Get the maximum number of virtual CPUs.
- TdVCpuNum : Get the number of virtual CPUs.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Guest software can be designed to run either as a TD, as a legacy virtual
machine, or directly on the CPU, based on enumeration of its run-time
environment. [TDX-Module] Chap 10.2 defines the flow and the new CPUID
leaf 0x21.
[TDX-Module] Architecture Specification: Intel(R) Trust Domain Extensions
Module, Chap 10.2, 344425-003US, August 2021
https://www.intel.com/content/dam/develop/external/us/en/documents/
tdx-module-1.0-public-spec-v0.931.pdf
Cc: Ray Ni <ray.ni@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Tdx.h includes the Intel Trust Domain Extension definitions.
Detailed information can be found in below document:
https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-module-1eas-v0.85.039.pdf
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Michael Kubacki [Fri, 1 Apr 2022 22:12:06 +0000 (18:12 -0400)]
BaseTools/Bin: Update GCC ARM compiler version
Updates to the latest release 11.2-2022.02. The previous download
page (version 10.3-2021.07) has been marked deprecated.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
The YAML file previously specified "windows-latest" which recently
moved to VS2022. To continue using VS2019 (at least in the short
term), the VM image needs to be explicitly set to "windows-2019".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The YAML file previously specified "windows-latest" which recently
moved to VS2022. To continue using VS2019 (at least in the short
term), the VM image needs to be explicitly set to "windows-2019".
Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Abner Chang <abner.chang@hpe.com> Cc: Nickle Wang <nickle.wang@hpe.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The YAML file previously specified "windows-latest" which recently
moved to VS2022. To continue using VS2019 (at least in the short
term), the VM image needs to be explicitly set to "windows-2019".
Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Changes the Python version used in pipelines to 3.8.x (3.8.12) to
workaround an issue discovered after 3.9.10 that causes
stuart_update to fail on a web_dependency (e.g. GCC ARM compilers).
The Python version should be updated to latest once that issue is
root caused and a long term fix is in place. This change is
introduced now to unblock overall CI.
Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
This fixes an issue where the framebuffer provided by coreboot or
slimbootloader will only work on the primary VGA device. If the
framebuffer corresponds to a different device the screen will stay black.
In addition, the code doesn't work for multiple graphic cards, has
reference to non existing functions, and is a duplication of common code.
Call EfiBootManagerConnectVideoController on every display device found,
not only the legacy VGA device. This is the same as OvmfPkg does.
Allows to display output on the framebuffer set up by firmware, which might
not be the VGA device.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Guo Dong <guo.dong@intel.com>
Patrick Rudolph [Wed, 16 Feb 2022 14:54:25 +0000 (07:54 -0700)]
UefiPayloadPkg: Fix PciHostBridgeLib
On modern platforms with TBT devices the coreboot resource allocator
opens large PCI bridge MMIO windows above 4GiB to place hotplugable
PCI BARs there as they won't fit below 4GiB. In addition modern
GPGPU devices have very big PCI bars that doesn't fit below 4GiB.
The PciHostBridgeLib made lots of assumptions about the coreboot
resource allocator that were not verified at runtime and are no
longer true.
Remove all of the 'coreboot specific' code and implement the same
logic as OvmfPkg's ScanForRootBridges.
Tested with coreboot as bootloader on platforms that have PCI resources
above 4GiB and on platforms that don't have resources above 4GiB.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Guo Dong <guo.dong@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Guo Dong [Tue, 8 Feb 2022 22:51:55 +0000 (15:51 -0700)]
UefiPayloadPkg: Fix build error
On windows build, need add "-DPLATFORMX64_ENABLE=TRUE" in the build
command line beside -DNETWORK_DRIVER_ENABLE=TRUE in order build
network features. So update DSC to set PLATFORMX64_ENABLE to TRUE
when building network feature.
On Linux build, DSC file should not have PcdAllowHttpConnections
without building network feature, else it would cause build error.
Signed-off-by: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Guo Dong <guo.dong@intel.com> Acked-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Dun Tan <dun.tan@intel.com>
Adds ParseAcpiBitFields() which is based on
ParseAcpi() and capable of parsing the bit fields.
Supports parsing of UINT8, UINT16, UINT32 and UINT64 byte data.
Cc: Ray Ni <ray.ni@intel.com> Cc: Zhichao Gao <zhichao.gao@intel.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Abdul Lateef Attar <abdattar@amd.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Kuo, Ted [Thu, 17 Mar 2022 08:38:32 +0000 (16:38 +0800)]
UefiCpuPkg: Update BFV searching algorithm in VTF0
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3870
The new algorithm searches FFS3 GUID first and then FFS2 GUID at
every 4KB address in the top 16MB just below 4GB.
Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Debkumar De <debkumar.de@intel.com> Cc: Harry Han <harry.han@intel.com> Cc: Catharine West <catharine.west@intel.com> Reviewed-by: Min Xu <min.m.xu@intel.com> Signed-off-by: Ted Kuo <ted.kuo@intel.com>
When doing ecc inf version check, the decimal type version number
like 1.27 is treated as invalid version.
So the code should be updated to support decimal type version number.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Gerd Hoffmann [Thu, 24 Mar 2022 12:04:36 +0000 (20:04 +0800)]
Basetools: turn off gcc12 warning
In function ?SetDevicePathEndNode?,
inlined from ?FileDevicePath? at DevicePathUtilities.c:857:5:
DevicePathUtilities.c:321:3: error: writing 4 bytes into a region of size 1 [-Werror=stringop-overflow=]
321 | memcpy (Node, &mUefiDevicePathLibEndDevicePath, sizeof (mUefiDevicePathLibEndDevicePath));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from UefiDevicePathLib.h:22,
from DevicePathUtilities.c:16:
../Include/Protocol/DevicePath.h: In function ?FileDevicePath?:
../Include/Protocol/DevicePath.h:51:9: note: destination object ?Type? of size 1
51 | UINT8 Type; ///< 0x01 Hardware Device Path.
| ^~~~
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Gerd Hoffmann [Thu, 24 Mar 2022 12:04:35 +0000 (20:04 +0800)]
BaseTools: fix gcc12 warning
Sdk/C/LzmaEnc.c: In function ?LzmaEnc_CodeOneMemBlock?:
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*p.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*(CLzmaEnc *)pp.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
cc1: all warnings being treated as errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Parallel hash patch redefines uint_64 type in CrtLibSupport.h
which has been defined in openssl/include/openssl/e_os2.h.
CryptMd5.c including e_os2.h cause redefinition bug.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com> Cc: Guomin Jiang <guomin.jiang@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Signed-off-by: Zhihao Li <zhihao.li@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
FeatureFlagExpression Support in Source section of INF file. The Pcd
value in the expression is from INF or DEC.
When a FeatureFlagExpression is present,if the expression evaluates
to TRUE,then the entry is valid. If the expression evaluates to FALSE,
then the EDK II build tools must ignore the entry.
This patch is going to add this feature.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Heng Luo <heng.luo@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com> Signed-off-by: Yi Li <yi1.li@intel.com>
Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Hao A Wu [Mon, 7 Mar 2022 08:19:58 +0000 (16:19 +0800)]
MdePkg/AcpiXX.h: Update Error Severity type for Generic Error Status Block
Starting from ACPI Specification Version 5.1 Errata B, the term
'Correctable' is no longer being used as an error severity of the
reported error in Chapter 18 APEI.
This commit will
a) For Acpi40.h & Acpi50.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE, since both the
terms 'Correctable' and 'Recoverable' are used to denote the same error
severity.
b) Header files starting from Acpi51.h to Acpi64.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE.
Keeps the origin EFI_ACPI_X_X_ERROR_SEVERITY_CORRECTABLE for compatibility
consideration, but add comments to mark it as deprecated and should no
longer be used.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hao A Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Parallel hash function ParallelHash256HashAll, as defined in NIST's
Special Publication 800-185, published December 2016. It utilizes
multi-process to calculate the digest.
Passed CI test.
Onprotocol version code passed test.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com> Cc: Guomin Jiang <guomin.jiang@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Signed-off-by: Zhihao Li <zhihao.li@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adds following changes
1) Added support for manufacturing mode in
BIOS Characteristics Extension Byte 2.
2) Added support for slot height in
System Slot Table (type 9).
3) Updated Built-in pointing device interface with
USB, I2C and SPI.
4) Updates Onboard Devices Extended Information with
wireless LAN, bluetooth, WWAN, eMMC, NVMe and UFC.
5) Added new table Firmware Inventory Information (Type 45)
and its corresponding enum values.
6) Added new table String Property Table (Type 46)
and its corresponding enum values.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Abdul Lateef Attar <abdattar@amd.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Sean Rhodes [Fri, 18 Feb 2022 14:52:25 +0000 (07:52 -0700)]
UefiPayloadPkg: Hookup SD/MMC timeout
Hook SD_MMC_TIMEOUT build option to SdMmcGenericTimeoutValue PCD.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com>
Sean Rhodes [Thu, 24 Feb 2022 07:58:51 +0000 (00:58 -0700)]
MdeModulePkg/SdMmcPciHcDxe: Make timeout for SD card configurable
The default 1s timeout can delay boot splash on some hardware with no
benefit.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Platform Redfish credential library shouldn't stop the service at either EndOfDXE or ExitBootService notification. RedfishConfigureHandler UEFI driver is responsible to stop the Redfish service when EndOfDXE or ExitBootService event is triggered.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Nickle Wang <nickle.wang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Check EFI_SECURE_BOOT_MODE_NAME before setting the flags to
prohibit acquiring Redfish service credential and using Redfish
service.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Nickle Wang <nickle.wang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Yuwei Chen <yuwei.chen@intel.com> Signed-off-by: Lixia Huang <lisa.huang@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sami Mujawar [Thu, 10 Mar 2022 17:39:27 +0000 (17:39 +0000)]
DynamicTablesPkg: Fix serial port namespace path in DBG2
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com> Tested-by: Sunny Wang <sunny.wang@arm.com>
Correct the logic about whether 5-level paging is supported.
Signed-off-by: Jason Lou <yun.lou@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn>
Kuo, Ted [Fri, 11 Mar 2022 07:28:34 +0000 (15:28 +0800)]
UefiCpuPkg: Support FFS3 GUID in SearchForBfvBase.asm
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3862
The new algorithm searches BFV address with FFS3 GUID first.
If not found, it will search BFV address with FFS2 GUID.
Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Debkumar De <debkumar.de@intel.com> Cc: Harry Han <harry.han@intel.com> Cc: Catharine West <catharine.west@intel.com> Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Abner Chang [Mon, 14 Mar 2022 01:24:01 +0000 (09:24 +0800)]
Maintainers: Update Maintainers.txt for edk2 Redfish modules
Add maintainer and reviewer for the edk2 Redfish-related modules
under EmulatorPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Nickle Wang <nickle.wang@hpe.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the Manufacturer Default Value
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to the correct value.
Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved
Cc: Wu Hao A <hao.a.wu@intel.com> Cc: Albecki Mateusz <mateusz.albecki@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
projects / mirror_edk2.git / log