]> git.proxmox.com Git - mirror_edk2.git/log
mirror_edk2.git
5 years agoStandaloneMmPkg: switch to NULL DebugLib resolution
Ard Biesheuvel [Mon, 21 Jan 2019 13:19:50 +0000 (14:19 +0100)]
StandaloneMmPkg: switch to NULL DebugLib resolution

Building StandaloneMmPkg from its .DSC is mainly intended for build
coverage, and so platform specific configuration such as UART addresses
don't belong here.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
5 years agoStandaloneMmPkg: drop redundant definition of gEfiMmConfigurationProtocolGuid
Ard Biesheuvel [Mon, 21 Jan 2019 13:11:23 +0000 (14:11 +0100)]
StandaloneMmPkg: drop redundant definition of gEfiMmConfigurationProtocolGuid

gEfiMmConfigurationProtocolGuid is already defined in MdePkg, so drop
the duplicate definition from StandaloneMmPkg.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by "Yao, Jiewen" <jiewen.yao@intel.com>

5 years agoStandaloneMmPkg/Library: Install Variable Arch Protocol
Jagadeesh Ujja [Mon, 4 Mar 2019 08:53:59 +0000 (14:23 +0530)]
StandaloneMmPkg/Library: Install Variable Arch Protocol

In a system implementing the variable store in MM, there are no variable
arch protocol and variable write arch protocol installed into the
DXE_SMM protocol database. On such systems, it is not required to
locate these protocols by the DXE runtime variable drivers because
it can be assumed that these protocols are already installed in the
MM context. But then such an implementation will deviate from the
existing traditional MM based variable driver implementation.

So in order to maintain consistency with the traditional MM variable
driver implementation, allow platforms to install these protocols into
the DXE protocol database but these protocol will not be consumed
by non-secure variable service runtime driver.

The Platform which uses StandaloneMM based secure variable storage
have to include this library

Example
In edk2-platforms/Platform/ARM/SgiPkg/SgiPlatform.dsc

  ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf {
    <LibraryClasses>
      NULL|StandaloneMmPkg/Library/VariableMmDependency/VariableMmDependency.inf
  }

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Acked-by "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoMdeModulePkg/SdMmcPciHcDxe: Add V3 64b DMA Support
Ashish Singhal [Wed, 6 Mar 2019 14:04:44 +0000 (22:04 +0800)]
MdeModulePkg/SdMmcPciHcDxe: Add V3 64b DMA Support

Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.

For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
5 years agoStdLib: Update resolv.conf to use Google's DNS servers
Rebecca Cran via edk2-devel [Fri, 8 Mar 2019 02:14:55 +0000 (19:14 -0700)]
StdLib: Update resolv.conf to use Google's DNS servers

The current servers listed appear to be unusable. I suspect most
people will get correct DNS servers via DHCP, but the defaults
should work for anyone.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
5 years agoMaintainers.txt: clarify Reviewer requirements and responsibilities
Laszlo Ersek [Wed, 27 Feb 2019 21:10:45 +0000 (22:10 +0100)]
Maintainers.txt: clarify Reviewer requirements and responsibilities

The current language for "Package Reviewer" only vaguely hints that
Package Reviewers should be able to provide guidance and directions.
Make this more obvious.

Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
5 years agoMdeModulePkg/HiiImage: Fix stack overflow when corrupted BMP is parsed (CVE-2018... edk2-stable201903
Ray Ni [Thu, 7 Mar 2019 10:35:14 +0000 (18:35 +0800)]
MdeModulePkg/HiiImage: Fix stack overflow when corrupted BMP is parsed (CVE-2018-12181)

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135

For 4bit BMP, there are only 2^4 = 16 colors in the palette.
But when a corrupted BMP contains more than 16 colors in the palette,
today's implementation wrongly copies all colors to the local
PaletteValue[16] array which causes stack overflow.

The similar issue also exists in the logic to handle 8bit BMP.

The patch fixes the issue by only copies the first 16 or 256 colors
in the palette depending on the BMP type.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
5 years agoMdeModulePkg/HiiDatabase: Fix potential integer overflow (CVE-2018-12181)
Ray Ni [Thu, 7 Mar 2019 10:35:13 +0000 (18:35 +0800)]
MdeModulePkg/HiiDatabase: Fix potential integer overflow (CVE-2018-12181)

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
5 years agoMaintainers.txt: remove unexpected unicode BOM
Jian J Wang [Fri, 8 Mar 2019 08:52:20 +0000 (16:52 +0800)]
Maintainers.txt: remove unexpected unicode BOM

The BOM was introduced by commit 6c05b958df532345a35b418b05effcf7fd51fc4e
accidentally.

Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Zhang, Chao B <chao.b.zhang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Zhang, Chao B <chao.b.zhang@intel.com>
5 years agoMaintainers.txt: Change package maintainer and reviewer of SecurityPkg.
Zhang, Chao B [Fri, 8 Mar 2019 02:46:07 +0000 (10:46 +0800)]
Maintainers.txt: Change package maintainer and reviewer of SecurityPkg.

Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
5 years agoUefiCpuPkg/Microcode.c: Add verification before calculate CheckSum32
Chen A Chen [Tue, 5 Mar 2019 00:21:18 +0000 (08:21 +0800)]
UefiCpuPkg/Microcode.c: Add verification before calculate CheckSum32

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020

Should make sure the TotalSize of Microcode is aligned with 4 bytes
before calling CalculateSum32 function.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
5 years agoBaseTools:Run packagedoc_cli.py to generate doc failed
Fan, ZhijuX [Fri, 1 Mar 2019 02:52:24 +0000 (10:52 +0800)]
BaseTools:Run packagedoc_cli.py to generate doc failed

The reason for this problem is that the file was opened incorrectly.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoUefiCpuPkg/Microcode: Fix InComplete CheckSum32 issue
Chen A Chen [Thu, 28 Feb 2019 03:15:51 +0000 (11:15 +0800)]
UefiCpuPkg/Microcode: Fix InComplete CheckSum32 issue

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020

The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoUefiCpuPkg: restore strict page attributes via #DB in nonstop mode only
Jian J Wang [Thu, 28 Feb 2019 07:16:25 +0000 (15:16 +0800)]
UefiCpuPkg: restore strict page attributes via #DB in nonstop mode only

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576

The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.

If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.

Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.

Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.

Fixes: dcc026217fdc363f55c217039fc43d344f69fed6
       16b918bbaf51211a32ae04d9d8a5ba6ccca25a6a
Test:
 - Pass special test of accessing memory beyond 4G in SMM mode
 - Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
   Windows7, Windows10)

Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoNetworkPkg: Fix Duplicate FreePool Error in WCM
Wang, Fan [Thu, 28 Feb 2019 09:10:09 +0000 (17:10 +0800)]
NetworkPkg: Fix Duplicate FreePool Error in WCM

* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1577

In WiFi Connection Manager scan process, the result received
from WiFi device driver will be freed twice, and will cause
unexpected errors, and even system crash.

This issue also exists in some other places potentially, this
patch is to fix these issues and also add Timer Cancelling
before Close to avoid potential NULL reference.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
5 years agoBaseTools: Add python3-distutils Ubuntu package checking
Feng, Bob C [Thu, 28 Feb 2019 13:19:09 +0000 (21:19 +0800)]
BaseTools: Add python3-distutils Ubuntu package checking

https://bugzilla.tianocore.org/show_bug.cgi?id=1509

Add python3-distutils Ubuntu package checking.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
5 years agoIntelFrameworkModulePkg/FwVolDxe: Ensure FfsFileHeader 8 bytes aligned
Star Zeng [Fri, 5 Jan 2018 05:37:35 +0000 (13:37 +0800)]
IntelFrameworkModulePkg/FwVolDxe: Ensure FfsFileHeader 8 bytes aligned

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630

To follow PI spec, ensure FfsFileHeader 8 bytes aligned.

Current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
5 years agoMdeModulePkg/DxeCore: Ensure FfsFileHeader 8 bytes aligned
Star Zeng [Fri, 5 Jan 2018 05:46:22 +0000 (13:46 +0800)]
MdeModulePkg/DxeCore: Ensure FfsFileHeader 8 bytes aligned

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630

To follow PI spec, ensure FfsFileHeader 8 bytes aligned.

For the integrity of FV(especially non-MemoryMapped FV) layout,
let CachedFv point to FV beginning, but not (FV + FV header).

And current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
5 years agoMdeModulePkg/PeiCore: Ensure FfsFileHeader 8 bytes aligned
Star Zeng [Fri, 5 Jan 2018 05:05:29 +0000 (13:05 +0800)]
MdeModulePkg/PeiCore: Ensure FfsFileHeader 8 bytes aligned

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630

To follow PI spec, ensure FfsFileHeader 8 bytes aligned.

Current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
5 years agoRevert "BaseTools:BaseTools supports to the driver combination."
Liming Gao [Mon, 25 Feb 2019 00:15:25 +0000 (08:15 +0800)]
Revert "BaseTools:BaseTools supports to the driver combination."

This reverts commit 838bc257bae3f9fc6723f41f3980f6cfbedb77e5.
After further evaluation, there are the unclear behavior in for the
driver combination feature. To not impact Q1 stable tag, remove it first.
1. If the drivers to be combined have the different PCD or library instance
   setting, build should not combine them and report build break. But this
   commit doesn't consider this case.
2. When start the sub driver fail, continue to start other sub driver. This
   behavior is required to be clarifed in build spec.
3. Unload the sub driver when the combined driver start fail. This case need
   to call the sub driver unload function for the driver start fail only.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoNetworkPkg: Add WiFi Connection Manager to NetworkPkg
Wang Fan [Fri, 22 Feb 2019 07:48:25 +0000 (15:48 +0800)]
NetworkPkg: Add WiFi Connection Manager to NetworkPkg

* V2

* Remove Arch dependency in Inf file
* Add a global guid for WiFi formset and set other guids to module levels
* Open supplicant and EapConfig by BY_DRIVER
* Remove token free function to avoid potential NULL reference
* Update WifiMgrUpdateConnectMessage() to only display message for Current Nic
* Fix the potential NULL reference in AIP call

* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1492

Add WiFi Connection Manager in NetworkPkg to provide UI for users to scan
networks, connect or disconnect to networks.

This connection manager won't include the UNDI driver, supplicant driver,
or other device specific drivers and is therefor not a complete solution
stack for UEFI Wi-Fi, users can seek help for Wireless card vendors.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
5 years agoUefiCpuPkg/PiSmmCpu: Add Shadow Stack Support for X86 SMM.
Jiewen Yao [Fri, 22 Feb 2019 13:30:36 +0000 (21:30 +0800)]
UefiCpuPkg/PiSmmCpu: Add Shadow Stack Support for X86 SMM.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521

We scan the SMM code with ROPgadget.
http://shell-storm.org/project/ROPgadget/
https://github.com/JonathanSalwan/ROPgadget/tree/master
This tool reports the gadget in SMM driver.

This patch enabled CET ShadowStack for X86 SMM.
If CET is supported, SMM will enable CET ShadowStack.
SMM CET will save the OS CET context at SmmEntry and
restore OS CET context at SmmExit.

Test:
1) test Intel internal platform (x64 only, CET enabled/disabled)
Boot test:
CET supported or not supported CPU
on CET supported platform
  CET enabled/disabled
  PcdCpuSmmCetEnable enabled/disabled
  Single core/Multiple core
  PcdCpuSmmStackGuard enabled/disabled
  PcdCpuSmmProfileEnable enabled/disabled
  PcdCpuSmmStaticPageTable enabled/disabled
CET exception test:
  #CF generated with PcdCpuSmmStackGuard enabled/disabled.
Other exception test:
  #PF for normal stack overflow
  #PF for NX protection
  #PF for RO protection
CET env test:
  Launch SMM in CET enabled/disabled environment (DXE) - no impact to DXE

The test case can be found at
https://github.com/jyao1/SecurityEx/tree/master/ControlFlowPkg

2) test ovmf (both IA32 and X64 SMM, CET disabled only)
test OvmfIa32/Ovmf3264, with -D SMM_REQUIRE.
  qemu-system-x86_64.exe -machine q35,smm=on -smp 4
    -serial file:serial.log
    -drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on
    -drive if=pflash,format=raw,unit=1,file=OVMF_VARS.fd
QEMU emulator version 3.1.0 (v3.1.0-11736-g7a30e7adb0-dirty)

3) not tested
IA32 CET enabled platform

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
5 years agoUefiCpuPkg/ExceptionLib: Add CET support.
Jiewen Yao [Fri, 22 Feb 2019 13:30:35 +0000 (21:30 +0800)]
UefiCpuPkg/ExceptionLib: Add CET support.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521

Add information dump for Control Protection exception.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
5 years agoMdePkg/BaseLib: Add Shadow Stack Support for X86.
Yao, Jiewen [Fri, 22 Feb 2019 13:30:34 +0000 (21:30 +0800)]
MdePkg/BaseLib: Add Shadow Stack Support for X86.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521

This patch adds SSP - shadow stack pointer to JumpBuffer.
It will be used for the platform that enabled CET/ShadowStack.

We add gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask
to control the global enable/disable.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
5 years agoMdePkg/Include: Add Nasm.inc
Yao, Jiewen [Fri, 22 Feb 2019 13:30:33 +0000 (21:30 +0800)]
MdePkg/Include: Add Nasm.inc

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521

This is to add CET related instruction in Nasm
because CET instruction is not supported yet.

See https://www.nasm.us/xdoc/2.14.02/html/nasmdocb.html

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
5 years agoNetworkPkg/DnsDxe: [CVE-2018-12178] Check the received packet size before parsing...
Jiaxin Wu [Mon, 2 Jul 2018 01:20:56 +0000 (09:20 +0800)]
NetworkPkg/DnsDxe: [CVE-2018-12178] Check the received packet size before parsing the message.

Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809

The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.

This patch is to fix above problem.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
5 years agoMdeModulePkg/RamDiskDxe: Restrict on RAM disk size (CVE-2018-12180)
Hao Wu [Wed, 7 Feb 2018 04:49:50 +0000 (12:49 +0800)]
MdeModulePkg/RamDiskDxe: Restrict on RAM disk size (CVE-2018-12180)

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134

Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.

This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/PartitionDxe: Ensure blocksize holds MBR (CVE-2018-12180)
Hao Wu [Fri, 9 Feb 2018 00:43:01 +0000 (08:43 +0800)]
MdeModulePkg/PartitionDxe: Ensure blocksize holds MBR (CVE-2018-12180)

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134

The commit adds checks for detecting GPT and MBR partitions.

These checks will ensure that the device block size is big enough to hold
an MBR (512 bytes).

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoShellBinPkg: Ia32/X64 Shell binary update.
Ray Ni [Wed, 27 Feb 2019 06:42:23 +0000 (14:42 +0800)]
ShellBinPkg: Ia32/X64 Shell binary update.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
5 years agoBaseTools:The BOM character is processed when python reads a file
Fan, ZhijuX [Tue, 26 Feb 2019 06:57:44 +0000 (14:57 +0800)]
BaseTools:The BOM character is processed when python reads a file

When python3 reads an XML file it will parse the file in error
if the file has a BOM

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoRevert "DynamicTablesPkg: Fix protocol section"
Sami Mujawar [Mon, 25 Feb 2019 20:37:21 +0000 (20:37 +0000)]
Revert "DynamicTablesPkg: Fix protocol section"

This reverts commit bde673b2dcd1b087af7f49dd5f0c3b82b02172a5.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoRevert "DynamicTablesPkg: Rename enum used for ID Mapping"
Sami Mujawar [Mon, 25 Feb 2019 20:37:06 +0000 (20:37 +0000)]
Revert "DynamicTablesPkg: Rename enum used for ID Mapping"

This reverts commit 1d49a75367ef6827b8b8f77f61e9ce245d1bdee3.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoRevert "DynamicTablesPkg: Add OEM Info"
Sami Mujawar [Mon, 25 Feb 2019 20:36:57 +0000 (20:36 +0000)]
Revert "DynamicTablesPkg: Add OEM Info"

This reverts commit c788bdaba47536447ae37518a96d92e0da54aad7.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoRevert "DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI"
Sami Mujawar [Mon, 25 Feb 2019 20:36:48 +0000 (20:36 +0000)]
Revert "DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI"

This reverts commit 6814256083a90ef218e7ae240e51922045175df1.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoRevert "DynamicTablesPkg: Remove GIC Distributor Id field"
Sami Mujawar [Mon, 25 Feb 2019 20:36:33 +0000 (20:36 +0000)]
Revert "DynamicTablesPkg: Remove GIC Distributor Id field"

This reverts commit d3a15f435f9716aa2f2ea5e9b35fcda04f267ab4.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoRevert "DynamicTablesPkg: Minor updates and fix typos"
Sami Mujawar [Mon, 25 Feb 2019 20:32:35 +0000 (20:32 +0000)]
Revert "DynamicTablesPkg: Minor updates and fix typos"

This reverts commit 07f4e26eb6fe5203028ecfe9bad90d3b67dc72c8.

Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoArmPkg: Fix writes to GICv3 GICD_IROUTER<n> reg
Sami Mujawar [Fri, 22 Feb 2019 19:43:28 +0000 (19:43 +0000)]
ArmPkg: Fix writes to GICv3 GICD_IROUTER<n> reg

According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.

Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoEmbeddedPkg/VirtualRealTimeClockLib: Fix correctness issues
Pete Batard [Mon, 25 Feb 2019 23:52:02 +0000 (23:52 +0000)]
EmbeddedPkg/VirtualRealTimeClockLib: Fix correctness issues

LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
  set (plus the time elapsed since), by subtracting number of seconds
  since reset.

[*] This fixes a build breakage, since one of these variables was set but
    never used, triggering a compiler diagnostic at some optimization levels.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoBaseTools:PackageDocumentTools import lib error occurs.
Fan, ZhijuX [Mon, 25 Feb 2019 05:13:20 +0000 (13:13 +0800)]
BaseTools:PackageDocumentTools import lib error occurs.

Steps:
 1. Download edk2 tree
 2. Build BaseTools
 3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
    to run packagedoc_cli.py

An error occurs if relative imports are used when running
a file alone

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoBaseTools: Fix a Eot issue.
Feng, Bob C [Mon, 25 Feb 2019 09:19:02 +0000 (17:19 +0800)]
BaseTools: Fix a Eot issue.

FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
 to resolve this problem.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoBaseTools: Eot failed when enable python3
Feng, Bob C [Mon, 25 Feb 2019 09:00:31 +0000 (17:00 +0800)]
BaseTools: Eot failed when enable python3

The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoDynamicTablesPkg: Minor updates and fix typos
Sami Mujawar [Thu, 21 Feb 2019 15:38:26 +0000 (15:38 +0000)]
DynamicTablesPkg: Minor updates and fix typos

Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg: Remove GIC Distributor Id field
Sami Mujawar [Tue, 19 Feb 2019 11:22:17 +0000 (11:22 +0000)]
DynamicTablesPkg: Remove GIC Distributor Id field

According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.

Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI
Sami Mujawar [Sat, 16 Feb 2019 12:10:02 +0000 (12:10 +0000)]
DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI

The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg: Add OEM Info
Sami Mujawar [Thu, 14 Feb 2019 11:01:20 +0000 (11:01 +0000)]
DynamicTablesPkg: Add OEM Info

Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg: Rename enum used for ID Mapping
Sami Mujawar [Thu, 21 Feb 2019 15:28:36 +0000 (15:28 +0000)]
DynamicTablesPkg: Rename enum used for ID Mapping

Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg: Fix protocol section
Sami Mujawar [Fri, 8 Feb 2019 18:47:00 +0000 (18:47 +0000)]
DynamicTablesPkg: Fix protocol section

Updated the Protocols section to reflect the protocols
that are produced or consumed.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg/AcpiSpcrLibArm: Support 16550 UART.
Ashish Singhal [Thu, 21 Feb 2019 18:38:57 +0000 (11:38 -0700)]
DynamicTablesPkg/AcpiSpcrLibArm: Support 16550 UART.

Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoDynamicTablesPkg/DynamicTableManagerDxe: Update DEPEX
Ashish Singhal [Thu, 21 Feb 2019 18:38:56 +0000 (11:38 -0700)]
DynamicTablesPkg/DynamicTableManagerDxe: Update DEPEX

DynamicTableManagerDxe initialization fails if
gEdkiiDynamicTableFactoryProtocolGuid,
gEdkiiConfigurationManagerProtocolGuid and
gEfiAcpiTableProtocolGuid are not already available.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
5 years agoArmVirtPkg/PlatformBootManagerLib: display boot option loading/starting
Laszlo Ersek [Wed, 20 Feb 2019 00:08:58 +0000 (01:08 +0100)]
ArmVirtPkg/PlatformBootManagerLib: display boot option loading/starting

Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoArmVirtPkg/ArmVirtQemu*: enable minimal Status Code Routing in DXE
Laszlo Ersek [Wed, 20 Feb 2019 03:45:20 +0000 (04:45 +0100)]
ArmVirtPkg/ArmVirtQemu*: enable minimal Status Code Routing in DXE

The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.

In commit 59541d41633c, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:

(1) Include the ReportStatusCodeRouterRuntimeDxe driver.

    This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
    EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
    runtime modules to report (produce) status codes. The latter allows
    the same types of modules to register callbacks for status code
    handling (consumption).

    (Handler registration  occurs only at boot time. Status codes are
    delivered to each handler at runtime as well, unless the handler is
    unregistered at ExitBootServices().)

(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
    modules only. This way DXE_DRIVER modules that use the
    REPORT_STATUS_CODE_EX() macro and friends will reach
    EFI_STATUS_CODE_PROTOCOL from point (1).

(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
    This causes the REPORT_STATUS_CODE_EX() macro and friends to let
    Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
    Debug Codes (bit#2) are filtered out.

(4) Include no driver, for now, that registers any status code handler via
    EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
    ReportStatusCodeRouterRuntimeDxe will be thrown away.

(5) Modify only the ArmVirtQemu* platforms. A status code handler will
    be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
    and this library instance is not consumed by ArmVirtXen.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoOvmfPkg/PlatformBootManagerLib: display boot option loading/starting
Laszlo Ersek [Wed, 20 Feb 2019 00:08:58 +0000 (01:08 +0100)]
OvmfPkg/PlatformBootManagerLib: display boot option loading/starting

Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoOvmfPkg: add library to track boot option loading/starting on the console
Laszlo Ersek [Wed, 22 Nov 2017 20:37:07 +0000 (21:37 +0100)]
OvmfPkg: add library to track boot option loading/starting on the console

Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.

In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
5 years agoMdeModulePkg/UefiBootManagerLib: fix LoadImage/StartImage status code rep.
Laszlo Ersek [Wed, 20 Feb 2019 02:31:28 +0000 (03:31 +0100)]
MdeModulePkg/UefiBootManagerLib: fix LoadImage/StartImage status code rep.

In the EFI_RETURN_STATUS_EXTENDED_DATA structure from PI-1.7, there may be
padding between the DataHeader and ReturnStatus members. The
REPORT_STATUS_CODE_EX() macro starts populating the structure immediately
after DataHeader, therefore the source data must provide for the padding.

Extract the BmReportLoadFailure() function from EfiBootManagerBoot(),
prepare a zero padding (if any) in a temporary
EFI_RETURN_STATUS_EXTENDED_DATA object, and fix the
REPORT_STATUS_CODE_EX() macro invocation.

Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1539
Fixes: c2cf8720a5aad74230767a1f11bade2d86de3745
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/UfsBlockIoPei: Correct use of 'DeviceIndex' in BlkIO PPI
Hao Wu [Tue, 12 Feb 2019 03:19:26 +0000 (11:19 +0800)]
MdeModulePkg/UfsBlockIoPei: Correct use of 'DeviceIndex' in BlkIO PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474

Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:

UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2

does not handle the input parameter 'DeviceIndex' properly.

According to both of the PI spec and the function description comments:

> DeviceIndex    Specifies the block device to which the function wants
>                to talk. ... This index is a number from one to
>                NumberBlockDevices.

But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).

This commit is to address this issue.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg: Rename confusion function name
Chen A Chen [Wed, 20 Feb 2019 08:42:50 +0000 (16:42 +0800)]
MdeModulePkg: Rename confusion function name

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1536

To avoid the confusion caused by function name,
rename EfiBootManagerGetNextFullDevicePath to
EfiBootManagerGetNextLoadOptionDevicePath.
As an API function should add EFIAPI prefix for this function.

Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoIntelSiliconPkg/MicrocodeUpdate: Fix incorrect checksum issue
Chen A Chen [Mon, 18 Feb 2019 07:21:14 +0000 (15:21 +0800)]
IntelSiliconPkg/MicrocodeUpdate: Fix incorrect checksum issue

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020

The same issue has fixed in UefiCpuPkg/Microcode.c file.
Please reference b6f67b4d58b81f12f63f5f8c94cf8af3600297ab
to get more detail information.

Cc: Ray Ni <ray.ni@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoBaseTools: Add parameter check for the AsciiStringToUint64
Feng, Bob C [Sat, 23 Feb 2019 09:41:53 +0000 (17:41 +0800)]
BaseTools: Add parameter check for the AsciiStringToUint64

If the input parameter AsciiString length is greater
than 255, the GenFv will hang.

This patch is to fix this issue.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoBaseTools:Some build generated files content are not ordered on linux
Fan, ZhijuX [Thu, 21 Feb 2019 05:18:18 +0000 (13:18 +0800)]
BaseTools:Some build generated files content are not ordered on linux

If the WORKSPACE environment variable has been set,The variables that
control stable sorting will not be set.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoBaseTools: Fix a bug about Structure PCD
Feng, Bob C [Tue, 19 Feb 2019 13:29:49 +0000 (21:29 +0800)]
BaseTools: Fix a bug about Structure PCD

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1535
If there is Hii Structure Pcd, build will fail, root cause is that
there is an incorrect variable access method used in code.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoBaseTools:Build fail if define [DEPEX] in library inf
Fan, ZhijuX [Thu, 21 Feb 2019 01:33:55 +0000 (09:33 +0800)]
BaseTools:Build fail if define [DEPEX] in library inf

When define [DEPEX] in lib inf to build, it will fail and report"
gUefiOvmfPkgTokenSpaceGuid.test1 used in [Depex] section should be
used as FixedAtBuild type and VOID* datum type in the module."
But we define this PCD to FixedAtBuild type and VOID* datum type indeed.

DEC:
[PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.test1 |
{GUID("4096267b-da0a-42eb-b5eb-fef31d207cb4")}|VOID*|0x3c

DSC:
add pcd under lib inf as below:

NULL|TestPkg/TestLib/TestLib.inf
 <PcdsFixedAtBuild>
    gUefiOvmfPkgTokenSpaceGuid.test1 | {GUID(gUefiOvmfPkgTokenSpaceGuid)}

Lib inf:(TestPkg/TestLib/TestLib.inf)
[Depex]
gUefiOvmfPkgTokenSpaceGuid.test1
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.test1

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoBaseTool: Fixed incremental rebuild issue.
Feng, Bob C [Wed, 20 Feb 2019 15:21:31 +0000 (23:21 +0800)]
BaseTool: Fixed incremental rebuild issue.

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1540

This issue in introduced by commit
d943b0c339fe3d35ffdf9f580ccb7a55915c6854

To convert bytes to string, we need to use bytes.decode()
instead of using str(bytes).

If the source file is not a txt file, ignore that file.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoBaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
Jiewen Yao [Wed, 20 Feb 2019 11:33:18 +0000 (19:33 +0800)]
BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.

https://bugzilla.tianocore.org/show_bug.cgi?id=1544

1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.

2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.

3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.

4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoMdeModulePkg: Add the runtime ResetSystemLib in MdeModulePkg.dsc
Zhichao Gao [Thu, 21 Feb 2019 00:59:44 +0000 (08:59 +0800)]
MdeModulePkg: Add the runtime ResetSystemLib in MdeModulePkg.dsc

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1461

Add the runtime library instance of ResetSystemLib in
MdeModulePkg.dsc to make sure it can build pass.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: Add a runtime library instance of ResetSystemLib
Zhichao Gao [Thu, 21 Feb 2019 00:59:43 +0000 (08:59 +0800)]
MdeModulePkg: Add a runtime library instance of ResetSystemLib

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1461

Implement a runtime library instance of ResetSystemLib. It would
use a internal point instead of gRT and convert it depend on
gEfiEventVirtualAddressChangeGuid.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: Add a new API ResetSystem for PEI ResetSystemLib
Zhichao Gao [Thu, 21 Feb 2019 00:59:42 +0000 (08:59 +0800)]
MdeModulePkg: Add a new API ResetSystem for PEI ResetSystemLib

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem for PEI ResetSystemLib to be in accord with
DXE instance.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: Add a new API ResetSystem for Null version
Zhichao Gao [Thu, 21 Feb 2019 00:59:41 +0000 (08:59 +0800)]
MdeModulePkg: Add a new API ResetSystem for Null version

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem for BaseResetSystemLibNull to be
in accord with other instances.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: Add a new API ResetSystem for DXE ResetSystemLib
Zhichao Gao [Thu, 21 Feb 2019 00:59:40 +0000 (08:59 +0800)]
MdeModulePkg: Add a new API ResetSystem for DXE ResetSystemLib

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem for DXE ResetSystemLib. So the consumer of
ResetSystemLib can use this API to reset system with additional reset
data.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: Add the new API ResetSystem in the head file
Zhichao Gao [Thu, 21 Feb 2019 00:59:39 +0000 (08:59 +0800)]
MdeModulePkg: Add the new API ResetSystem in the head file

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add the new API ResetSystem in the related head file so that
the consumer can use it through the combination of library
instance and head file.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoMdeModulePkg: change the function name ResetSystem
Zhichao Gao [Thu, 21 Feb 2019 00:59:38 +0000 (08:59 +0800)]
MdeModulePkg: change the function name ResetSystem

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Change the function name form ResetSystem to RuntimeServiceResetSystem.
Because ResetSystem and EfiResetSystem would be used in ResetSystemLib
and RuntimeLib.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoShellPkg: add array index check for shell delay option
Zhichao Gao [Mon, 18 Feb 2019 08:28:09 +0000 (16:28 +0800)]
ShellPkg: add array index check for shell delay option

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1528

Shell delay option without parameters do not check the
index of shell parameter argv. Add index check to avoid
invalid pointer references.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoSecurityPkg/HddPassword: Add Security feature set support for ATA dev
Hao Wu [Tue, 15 Jan 2019 08:33:09 +0000 (16:33 +0800)]
SecurityPkg/HddPassword: Add Security feature set support for ATA dev

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1529

This commit will add the 'Security feature set' support for ATA devices.

According to the AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
specification, the Security feature set is an optional feature. In
summary, the feature is a password system that restricts access to user
data stored on an ATA device. A more detailed introduction of this feature
can be referred from the ATA8-ACS spec.

The HddPassword driver is composed of 2 parts:
* A DXE driver and
* A PEI driver

The DXE driver consumes EFI_ATA_PASS_THRU_PROTOCOL instances and installs
an HII GUI to manage the devices. If the managing device supports Security
feature set, the HII page will provide the user with the ability to
set/update/disable the password for this device. Also, if a password is
being set via the Security feature set, a popup window will show during
boot requesting the user to input password.

Another feature supported by this driver is that for those managing
devices with password set, they will be automatically unlocked during the
S3 resume. This is done by the co-work of the DXE driver and the PEI
driver:

The DXE driver will save the password and the identification information
for these devices into a LockBox, which is only allowed to restore during
S3 resume.

The PEI driver, during S3 resume, will restore the content in the LockBox
and will consume EDKII_PEI_ATA_PASS_THRU_PPI instances to unlock devices.

Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoSecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI
Hao Wu [Mon, 27 Aug 2018 08:52:13 +0000 (16:52 +0800)]
SecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:

* ATA hard disks working under AHCI mode
* NVM Express devices

The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.

More specifically, the OpalPasswordDxe will handle:

* Pre-allocate MMIO resource and save it in a driver internal LockBox for
  OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.

Meanwhile, the OpalPasswordPei will handle:

* Rely on the boot script for the PCI configuration space program of ATA
  controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
  controllers;
* Initialize ATA and NVME controllers and devices.

This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).

After such codes removal, the OpalPasswordDxe will only handle:

* Construct/update the S3StorageDeviceInitList LockBox with the managing
  ATA and NVME devices.

And the OpalPasswordPei will only handle:

* Locate Storage Security Command PPI instances to perform the device
  automatic unlock during the S3 resume.

Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoOvmfPkg/LockBoxLib: Update the comments for API UpdateLockBox()
Hao Wu [Mon, 11 Feb 2019 07:39:50 +0000 (15:39 +0800)]
OvmfPkg/LockBoxLib: Update the comments for API UpdateLockBox()

The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()

adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().

This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
Hao Wu [Tue, 4 Dec 2018 01:59:55 +0000 (09:59 +0800)]
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the support to enlarge a LockBox when using the
LockBoxLib API UpdateLockBox().

Please note that the new support will ONLY work for LockBox with attribute
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY set.

The functional uni-test for the commit is available at:
https://github.com/hwu25/edk2/tree/lockbox_unitest

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
5 years agoMdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox()
Hao Wu [Mon, 24 Dec 2018 06:49:01 +0000 (14:49 +0800)]
MdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox()

This commit is out of the scope for BZ-1409. It is a refinement for the
PEI library instance within SmmLockBoxLib.

For the below ASSERT statement within function RestoreLockBox():
  Status = SmmCommunicationPpi->Communicate (
                                  SmmCommunicationPpi,
                                  &CommBuffer[0],
                                  &CommSize
                                  );
  if (Status == EFI_NOT_STARTED) {
    //
    // Pei SMM communication not ready yet, so we access SMRAM directly
    //
    DEBUG ((DEBUG_INFO, "SmmLockBoxPeiLib Communicate - (%r)\n", Status));
    Status = InternalRestoreLockBoxFromSmram (Guid, Buffer, Length);
    LockBoxParameterRestore->Header.ReturnStatus = (UINT64)Status;
    if (Length != NULL) {
      LockBoxParameterRestore->Length = (UINT64)*Length;
    }
  }
  ASSERT_EFI_ERROR (Status);

It is possible for previous codes to return an error status that is
possible for happen. One example is that, when the 'if' statement
'if (Status == EFI_NOT_STARTED) {' is entered, function
InternalRestoreLockBoxFromSmram() is possible to return 'BUFFER_TOO_SMALL'
if the caller of RestoreLockBox() provides a buffer that is too small to
hold the content of LockBox.

Thus, this commit will remove the ASSERT here.

Please note that the current implementation of RestoreLockBox() is
handling the above-mentioned error case properly, so no additional error
handling codes are needed here.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
5 years agoMdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_'
Hao Wu [Mon, 3 Dec 2018 08:31:23 +0000 (16:31 +0800)]
MdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_'

This commit is out of the scope for BZ-1409. It is a coding style
refinement for the SmmLockBoxLib.

More specifically, the commit will remove all the debug message display
level macros starting with 'EFI_D_' and replace them with macros starting
with 'DEBUG_'.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
5 years agoMdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI
Hao Wu [Fri, 22 Jun 2018 08:53:28 +0000 (16:53 +0800)]
MdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the AHCI mode ATA device support in the PEI phase.

More specifically, the newly add AhciPei driver will consume the ATA AHCI
host controller PPI for ATA controllers working under AHCI code within the
system. And then produces the below PPIs for each controller:

EDKII PEI ATA PassThru PPI
Storage Security Command PPI

Also, the driver will consume the S3StorageDeviceInitList LockBox in S3
phase. The purpose is to perform an on-demand (partial) ATA device
enumeration/initialization on each controller to benefit the S3 resume
performance.

The implementation of this driver is currently based on the below
specifications:
Serial ATA Revision 2.6
Serial ATA Advanced Host Controller Interface (AHCI) 1.3.1
AT Attachment with Packet Interface - 6 (ATA/ATAPI-6)

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox
Hao Wu [Mon, 21 Jan 2019 06:14:19 +0000 (14:14 +0800)]
MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI
Hao Wu [Tue, 29 Jan 2019 08:43:41 +0000 (16:43 +0800)]
MdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

For the NvmExpressPei driver, this commit will add codes to produce the
Storage Security Command PPI if the underlying NVM Express controller
supports the Security Send and Security Receive commands.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/NvmExpressPei: Avoid updating the module-level variable
Hao Wu [Mon, 27 Aug 2018 08:51:45 +0000 (16:51 +0800)]
MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable

This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.

Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg: Add GUID for LockBox to save storage dev to init in S3
Hao Wu [Fri, 14 Dec 2018 06:39:45 +0000 (14:39 +0800)]
MdeModulePkg: Add GUID for LockBox to save storage dev to init in S3

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.

The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.

The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).

The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.

The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoMdeModulePkg: Add definitions for Storage Security Command PPI
Hao Wu [Mon, 11 Jun 2018 01:47:50 +0000 (09:47 +0800)]
MdeModulePkg: Add definitions for Storage Security Command PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.

More specifically, the PPI will provide services to:

* Get the number of mass storage devices managed by a instance of the SSC
  PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
  storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
  'ReceiveData' and 'SendData').

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoMdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI
Hao Wu [Tue, 3 Jul 2018 06:28:22 +0000 (14:28 +0800)]
MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.

More specifically, the PPI will provide services to:

* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
  'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
  host controller (by service 'GetDevicePath').

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoMdeModulePkg: Add definitions for ATA AHCI host controller PPI
Hao Wu [Tue, 19 Jun 2018 05:52:36 +0000 (13:52 +0800)]
MdeModulePkg: Add definitions for ATA AHCI host controller PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the definitions for ATA AHCI host controller PPI. The
purpose of the PPI in to provide:

* MMIO base address
* Controller identification information (DevicePath)

for ATA host controllers working under AHCI mode.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoMaintainers: specify the scope for OvmfPkg/ArmVirtPkg Xen module reviewers
Laszlo Ersek [Thu, 21 Feb 2019 10:57:33 +0000 (11:57 +0100)]
Maintainers: specify the scope for OvmfPkg/ArmVirtPkg Xen module reviewers

We can use the format introduced under MdeModulePkg to clarify the
reviewership scopes a little. This should decrease the review spam that
Xen reviewers get.

Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[lersek@redhat.com: resolve conflict with commit 98fc52c44eee]

5 years agoMaintainers: add TPM2 reviewers for OvmfPkg
Laszlo Ersek [Mon, 11 Feb 2019 12:34:30 +0000 (13:34 +0100)]
Maintainers: add TPM2 reviewers for OvmfPkg

OVMF can be built with a significant amount of TPM2 code now; add
Marc-André and Stefan as Reviewers for TPM2-related patches.

Keep the list of "R" entries alphabetically sorted.

Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: resolve conflict with commit 98fc52c44eee]

5 years agoMaintainers.txt: Update e-mail address for Julien Grall
Julien Grall [Thu, 21 Feb 2019 15:21:07 +0000 (15:21 +0000)]
Maintainers.txt: Update e-mail address for Julien Grall

I don't watch much my Linaro e-mail anymore. So update my e-mail address
from Linaro to the Arm one.

Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
5 years agoMdePkg/UefiDevicePathLibDevicePathProtocol: Add sanity check for FilePath device...
Jian J Wang [Thu, 14 Feb 2019 09:57:47 +0000 (17:57 +0800)]
MdePkg/UefiDevicePathLibDevicePathProtocol: Add sanity check for FilePath device path

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1497

Current implementation of IsDevicePathValid() is not enough for type
of MEDIA_FILEPATH_DP, which has NULL-terminated string in the device
path. This patch add a simple NULL character check at Length position.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdePkg/UefiDevicePathLib: Add sanity check for FilePath device path
Jian J Wang [Fri, 25 Jan 2019 14:12:25 +0000 (22:12 +0800)]
MdePkg/UefiDevicePathLib: Add sanity check for FilePath device path

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1497

Current implementation of IsDevicePathValid() is not enough for type
of MEDIA_FILEPATH_DP, which has NULL-terminated string in the device
path. This patch add a simple NULL character check at Length position.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoUefiCpuPkg/Microcode: Fix incorrect checksum issue for extended table
Chen A Chen [Fri, 15 Feb 2019 06:29:41 +0000 (14:29 +0800)]
UefiCpuPkg/Microcode: Fix incorrect checksum issue for extended table

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020

The following Microcode payload format is define in SDM spec.
Payload: |MicrocodeHeader|MicrocodeBinary|ExtendedHeader|ExtendedTable|.
When we verify the CheckSum32 with ExtendedTable, we should use the fields
of ExtendedTable to replace corresponding fields in MicrocodeHeader,
and then calculate the CheckSum32 with MicrocodeHeader+MicrocodeBinary.
This patch already verified on ICL platform.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
5 years agoSecurityPkg/TcgConfigDxe: Allow enabling TPM 1.2 device from disabled state.
Gonzalez Del Cueto, Rodrigo [Mon, 4 Feb 2019 06:06:57 +0000 (14:06 +0800)]
SecurityPkg/TcgConfigDxe: Allow enabling TPM 1.2 device from disabled state.

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1511

Currently the TCG config setup form defaults the physical presence action to
PHYSICAL_PRESENCE_ENABLE, this prevents the action from being called. When a TPM
1.2 device is in Disabled and Activated state it is not possible to issue the
PHYSICAL_PRESENCE_ENABLE using the menu action.

By having the form default to PHYSICAL_PRESENCE_NO_ACTION, the user is now able
to select PHYSICAL_PRESENCE_ENABLE and toggle the TPM 1.2 device enable state.

Contributed-under: TianoCore Contribution Agreement 1.1

Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
5 years agoBaseTools:PCD value error in structure pcd sku case.
Fan, ZhijuX [Mon, 18 Feb 2019 09:53:09 +0000 (17:53 +0800)]
BaseTools:PCD value error in structure pcd sku case.

Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoBaseTools:Fixed build failure when specifying multiple BUILDTARGET
Fan, ZhijuX [Tue, 19 Feb 2019 10:56:03 +0000 (18:56 +0800)]
BaseTools:Fixed build failure when specifying multiple BUILDTARGET

With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoBaseTools: replace Sdict with OrderedDict in UPT
Feng, Bob C [Tue, 19 Feb 2019 15:44:22 +0000 (23:44 +0800)]
BaseTools: replace Sdict with OrderedDict in UPT

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1504

V2: import OrderredDict as Sdict in Misc.py instead
updating all the py files.

Sdict class is removed on the commit
174a9d3cc8f74f7a731ac5f16ce6864c8eb359ec
but there are still some py files import it.

This patch is to use collections.OrderedDict to replace Sdict.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
5 years agoBaseTools:BaseTools supports to the driver combination.
Fan, ZhijuX [Tue, 19 Feb 2019 10:46:41 +0000 (18:46 +0800)]
BaseTools:BaseTools supports to the driver combination.

BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1520

To save the image size without the compression, more than
one drivers can be combined into single one. When more than
one drivers are combined, their depex will be AND together.
Below is the example to combine BootManagerPolicyDxe into
DriverHealthManagerDxe.

Besides this patch, BaseTools also needs to check the module
type and make sure all module type are same. Otherwise,
BaseTools will report the error.
DRIVER INF has the parameter ENTRY_POINT
LIBRARY INF has the parameter LIBRARY_CLASS

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5 years agoIntelSiliconPkg/MicrocodeUpdateDxe: Error message enhancement
Shenglei Zhang [Mon, 18 Feb 2019 07:15:41 +0000 (15:15 +0800)]
IntelSiliconPkg/MicrocodeUpdateDxe: Error message enhancement

The error message of ExtendedTableCount is not clear. Add the count
number into the debug message.
https://bugzilla.tianocore.org/show_bug.cgi?id=1500

Cc: Ray Ni <ray.ni@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
5 years agoBaseTools: Remove unused txt files
Liming Gao [Fri, 15 Feb 2019 14:32:18 +0000 (22:32 +0800)]
BaseTools: Remove unused txt files

externals.txt is to refer to the binary Win32. It is not used any longer.
BuildNotes.txt is to freeze BaseTools python. It is not used any longer.
BinaryFiles.txt is to list the file in Bin directory. But, Bin dir is empty.
building-gcc.txt and gcc is for mingw-gcc. It is not used any longer.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
5 years agoUefiCpuPkg/SecCore: Wrong Debug Information for SecCore
Chasel, Chiu [Tue, 19 Feb 2019 07:30:23 +0000 (15:30 +0800)]
UefiCpuPkg/SecCore: Wrong Debug Information for SecCore

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1533

When SecCore and PeiCore in different FV, current
implementation still assuming SecCore and PeiCore are in
the same FV.
To fix this issue 2 FVs will be input parameters for
FindAndReportEntryPoints () and SecCore and PeiCore will
be found in each FV and correct debug information will
be reported.

Test: Booted with internal platform successfully.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
5 years agoMdeModulePkg/SdMmcPciHcDxe: Use 16/32-bit IO widths
Edgar Handal [Tue, 19 Feb 2019 17:06:56 +0000 (01:06 +0800)]
MdeModulePkg/SdMmcPciHcDxe: Use 16/32-bit IO widths

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537

Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.

The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>