Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Hao A Wu [Mon, 7 Mar 2022 08:19:58 +0000 (16:19 +0800)]
MdePkg/AcpiXX.h: Update Error Severity type for Generic Error Status Block
Starting from ACPI Specification Version 5.1 Errata B, the term
'Correctable' is no longer being used as an error severity of the
reported error in Chapter 18 APEI.
This commit will
a) For Acpi40.h & Acpi50.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE, since both the
terms 'Correctable' and 'Recoverable' are used to denote the same error
severity.
b) Header files starting from Acpi51.h to Acpi64.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE.
Keeps the origin EFI_ACPI_X_X_ERROR_SEVERITY_CORRECTABLE for compatibility
consideration, but add comments to mark it as deprecated and should no
longer be used.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hao A Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Parallel hash function ParallelHash256HashAll, as defined in NIST's
Special Publication 800-185, published December 2016. It utilizes
multi-process to calculate the digest.
Passed CI test.
Onprotocol version code passed test.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com> Cc: Guomin Jiang <guomin.jiang@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Signed-off-by: Zhihao Li <zhihao.li@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adds following changes
1) Added support for manufacturing mode in
BIOS Characteristics Extension Byte 2.
2) Added support for slot height in
System Slot Table (type 9).
3) Updated Built-in pointing device interface with
USB, I2C and SPI.
4) Updates Onboard Devices Extended Information with
wireless LAN, bluetooth, WWAN, eMMC, NVMe and UFC.
5) Added new table Firmware Inventory Information (Type 45)
and its corresponding enum values.
6) Added new table String Property Table (Type 46)
and its corresponding enum values.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Abdul Lateef Attar <abdattar@amd.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Sean Rhodes [Fri, 18 Feb 2022 14:52:25 +0000 (07:52 -0700)]
UefiPayloadPkg: Hookup SD/MMC timeout
Hook SD_MMC_TIMEOUT build option to SdMmcGenericTimeoutValue PCD.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com>
Sean Rhodes [Thu, 24 Feb 2022 07:58:51 +0000 (00:58 -0700)]
MdeModulePkg/SdMmcPciHcDxe: Make timeout for SD card configurable
The default 1s timeout can delay boot splash on some hardware with no
benefit.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Platform Redfish credential library shouldn't stop the service at either EndOfDXE or ExitBootService notification. RedfishConfigureHandler UEFI driver is responsible to stop the Redfish service when EndOfDXE or ExitBootService event is triggered.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Nickle Wang <nickle.wang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Check EFI_SECURE_BOOT_MODE_NAME before setting the flags to
prohibit acquiring Redfish service credential and using Redfish
service.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Nickle Wang <nickle.wang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Yuwei Chen <yuwei.chen@intel.com> Signed-off-by: Lixia Huang <lisa.huang@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sami Mujawar [Thu, 10 Mar 2022 17:39:27 +0000 (17:39 +0000)]
DynamicTablesPkg: Fix serial port namespace path in DBG2
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com> Tested-by: Sunny Wang <sunny.wang@arm.com>
Correct the logic about whether 5-level paging is supported.
Signed-off-by: Jason Lou <yun.lou@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn>
Kuo, Ted [Fri, 11 Mar 2022 07:28:34 +0000 (15:28 +0800)]
UefiCpuPkg: Support FFS3 GUID in SearchForBfvBase.asm
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3862
The new algorithm searches BFV address with FFS3 GUID first.
If not found, it will search BFV address with FFS2 GUID.
Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Debkumar De <debkumar.de@intel.com> Cc: Harry Han <harry.han@intel.com> Cc: Catharine West <catharine.west@intel.com> Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Abner Chang [Mon, 14 Mar 2022 01:24:01 +0000 (09:24 +0800)]
Maintainers: Update Maintainers.txt for edk2 Redfish modules
Add maintainer and reviewer for the edk2 Redfish-related modules
under EmulatorPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Nickle Wang <nickle.wang@hpe.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the Manufacturer Default Value
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to the correct value.
Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved
Cc: Wu Hao A <hao.a.wu@intel.com> Cc: Albecki Mateusz <mateusz.albecki@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Changes the default for the "OutputFileDiffs" configuration option
to "True" so the formatting suggestions detected by Uncrustify
will be output in the test case log. The diff is printed in unified
diff format.
This was disabled by default during the initial enabling of
Uncrustify to reduce overall execution time of the plugin against
the codebase due to the large number of changes detected.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Rebecca Cran <quic_rcran@quicinc.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Sean Rhodes [Wed, 23 Feb 2022 22:55:19 +0000 (15:55 -0700)]
BlSupportSmm: fix definition of SetSmrr()
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Guo Dong <guo.dong@intel.com>
Sean Rhodes [Sat, 5 Mar 2022 10:14:34 +0000 (03:14 -0700)]
UefiPayloadPkg: Make Boot Manager Key configurable
Provide a build option to use [Esc] instead of [F2] for devices
such as Chromebooks that don't have F-keys.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Ray Ni <ray.ni@Intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com>
Currently this NvmeExpress Driver do not support metadata handling.
According to the NVME specs, metadata may be transferred to the host after
the logical block data. It can overrun the input buffer which may only
be the size of logical block data.
Add a check to return not support for the namespaces formatted with
metadata.
v2 changes:
- Change debug log level from INFO to ERROR
- Change to if (NamespaceData->LbaFormat[LbaFmtIdx].Ms != 0)
v1: https://edk2.groups.io/g/devel/message/87242
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hua Ma <hua.ma@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Sean Rhodes [Fri, 4 Mar 2022 23:05:11 +0000 (16:05 -0700)]
UefiPayloadPkg: Fix case of protocol
Fix case match in <Protocol/MpService.h> to avoid build failure on
Linux.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Guo Dong <guo.dong@intel.com>
Sean Rhodes [Wed, 23 Feb 2022 22:59:33 +0000 (15:59 -0700)]
UefiPayloadPkg: Add build option for Above 4G Memory
When build option ABOVE_4G_MEMORY is set to true, nothing will change
and EDKII will use all available memory.
Setting it to false will create memory type information HOB in
payload entry, so that EDKII will reserve enough memory below 4G
for EDKII modules. This option is useful for bootloaders that are not
fully 64-bit aware such as Qubes R4.0.4 bootloader, Zorin and Proxmox.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Guo Dong <guo.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Guo Dong [Wed, 23 Feb 2022 23:19:01 +0000 (16:19 -0700)]
Maintainers.txt: Add new reviewer for UefiPayloadPkg
Add Sean Rhodes as UefiPayload reviewer mainly focus on
UEFI payload for coreboot support.
Signed-off-by: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
This patch define a new Protocol with the new services
SmmWaitForAllProcessor(), which can be used by SMI handler
to optionally wait for other APs to complete SMM rendezvous in
relaxed AP mode.
A new library SmmCpuRendezvousLib is provided to abstract the service
into library API to simple SMI handler code.
Cc: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Zhihao Li <zhihao.li@intel.com> Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Sebastien Boeuf [Wed, 2 Mar 2022 13:31:36 +0000 (21:31 +0800)]
OvmfPkg: CloudHv: Rely on PVH memmap instead of CMOS
Instead of using the CMOS, the CloudHv platform relies on the list of
memmap entries provided through the PVH boot protocol to determine the
last RAM address below 4G.
Sebastien Boeuf [Wed, 2 Mar 2022 13:31:34 +0000 (21:31 +0800)]
OvmfPkg: Generate CloudHv as a PVH ELF binary
Following the model from the Xen target, CloudHv is generated as a PVH
ELF binary to take advantage of the PVH specification, which requires
less emulation from the VMM.
The fdf include file CloudHvElfHeader.fdf.inc has been generated from
the following commands:
Sebastien Boeuf [Wed, 2 Mar 2022 13:31:33 +0000 (21:31 +0800)]
OvmfPkg: CloudHv: Remove VARS and CODE sections
CloudHv doesn't need any VARS store, and it doesn't need the CODE
section to be generated separately either. The only thing needed is to
generate a firmware binary that can be used by Cloud Hypervisor.
Sebastien Boeuf [Wed, 2 Mar 2022 13:31:31 +0000 (21:31 +0800)]
OvmfPkg: Xen: Use a new fdf include for the PVH ELF header
Instead of having the PVH ELF header part of the fdf file directly, we
move it to a dedicated include file. This is the first step in
automating the generation of the header.
Sebastien Boeuf [Wed, 2 Mar 2022 13:31:30 +0000 (21:31 +0800)]
OvmfPkg: Make the Xen ELF header generator more flexible
Adding some flexibility to the program through optional parameters and
global define, so that other targets can use the generator.
* A global define is added so that we can choose at build time if we
want to use 32-bit or 64-bit base structures.
* A first optional parameter is added so the user can provide the
expected blob size of the generated binary.
* A second optional parameter is added so the user can specify an output
file to which the generated output will be printed.
Sean Rhodes [Thu, 24 Feb 2022 11:38:18 +0000 (19:38 +0800)]
MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting
No need to check the interface protocol then conditionally setting,
just set it to BOOT_PROTOCOL and check for error.
This is what Linux does for HID devices as some don't follow the USB spec.
One example is the Aspeed BMC HID keyboard device, which adds a massive
boot delay without this patch as it doesn't respond to
'GetProtocolRequest'.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
It will have some potential issue when memory larger than 2G because
the high memory address will be fill with 0xFFFFFFFF when do the
operation of INTN + INT64 but it is 32 bit normal data in fact.
Should use same data type INT64 + INT64.
V3:
1. Use INT64 as input parameter because all date type is 64 bit
V2:
1. Force the data type to UINTN to avoid high dword be filled with
0xFFFFFFFF
2. Keep INTN because the offset may postive or negative.
Reviewed-by: Guo Dong <guo.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Remove the macro definitions regarding Opcode because new version of
NASM tool(e.g. v2.15.05) supports the corresponding instructions.
Note: This patch need to be merged after other NASM code change to avoid
compilation errors.
Signed-off-by: Jason Lou <yun.lou@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries. link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com>
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries. link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries. link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries. link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Tomas Pilar [Thu, 24 Feb 2022 16:22:19 +0000 (16:22 +0000)]
MdeModulePkg: Correct high-memory use in NvmExpressDxe
Move the logic that stores starting PCI attributes and sets the
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute to
DriverBindingStart() before the memory that backs the
DMA engine is allocated.
This ensures that the DMA-backing memory is not forcibly allocated
below 4G in system address map. Otherwise the allocation fails on
platforms that do not have any memory below the 4G mark and the drive
initialisation fails.
Leave the PCI device enabling attribute logic in NvmeControllerInit()
to ensure that the device is re-enabled on reset in case it was
disabled via PCI attributes.
Cc: Ray Ni <ray.ni@intel.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tomas Pilar <quic_tpilar@quicinc.com> Acked-by: Hao A Wu <hao.a.wu@intel.com>
Improve the MemEncryptSev{Es,Snp}IsEnabled() to use the SEV_STATUS MSR
value saved in the workarea. Since workarea is valid until the PEI phase,
so, for the Dxe phase use the PcdConfidentialComputingGuestAttr to
determine which SEV technology is enabled.
Cc: Min Xu <min.m.xu@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
In order to probe the SEV feature the BaseMemEncryptLib and Reset vector
reads the SEV_STATUS MSR. Cache the value on the first read in the
workarea. In the next patches the value saved in the workarea will
be used by the BaseMemEncryptLib. This not only eliminates the extra
MSR reads it also helps cleaning up the code in BaseMemEncryptLib.
Cc: Min Xu <min.m.xu@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Ard Biesheuvel [Tue, 1 Feb 2022 18:00:47 +0000 (19:00 +0100)]
ArmVirtPkg/ArmVirtKvmTool: wire up configurable timeout
Use the correct PCD type for PcdPlatformBootTimeOut so it gets wired up
to the Timeout EFI variable automatically, which is how the boot manager
stores the timeout preference.
Note that this changes the default to 5 seconds, which appears to be
common across platforms.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Alex reports that the cache invalidation performed by
ArmVirtMemoryInitPeiLib takes a non-negligible amount of time at boot.
This cache invalidation used to be necessary to avoid inconsistencies
between the CPU's cached and uncached views of the permanent PEI memory
region, given that the PEI phase is where the MMU gets enabled.
The only allocations done from permanent PEI memory with the MMU off are
pages used for page tables, and since commit 748fea6279ef
("ArmPkg/ArmMmuLib AARCH64: invalidate page tables before populating
them"), each of those is invalidated in the caches explicitly, for
reasons described in the patch's commit log. All other allocations done
in PEI are either from temporary PEI memory, which includes the stack,
or from permanent PEI memory but after the MMU has been enabled.
This means that the cache invalidation in ArmVirtMemoryInitPeiLib is no
longer necessary, and can simply be dropped.
Reported-by: Alexander Graf <graf@amazon.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The size of buffer should be 3 CHAR16 for Null-terminated Unicode
string.
The first char is the AKM/Cipher Suite number, the second char is ' ',
the third char is '\0'.
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Signed-off-by: Heng Luo <heng.luo@intel.com> Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Ping GetTimerPeriod API returns sometime zero value when
StallCounter has smaller value than RttTimerTick (divide by zero)
which results some failure at ping UEFI shell command
Signed-off-by: MohammedX Rehan <mohammedx.rehan@intel.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
This happen because the above commit extended the BaseMemEncryptSevLib.inf
to include VmgExitLib. The FvbServicesSmm uses the functions provided
by the MemEncryptSevLib to clear the memory encryption mask from the
page table. It created a dependency, as shown below
OvmfPkg/FvbServicesSmm.inf
---> MemEncryptSevLib class
---> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
---> VmgExitLib
---> "OvmfPkg/VmgExitLib" instance
---> LocalApicLib class
---> UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf instance
---> TimerLib class
---> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
---> PciLib class
---> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
The LocalApicLib provides a constructor, execution of the constructor
causes an exception. The SEV-ES and SEV-SNP do not support the SMM, so
skip including the VmgExitLib chain. Use the module override to use the
VmgExitLibNull to avoid the inclusion of unneeded LocalApicLib dependency
chain in FvbServicesSmm. We ran similar issue for AmdSevDxe driver,
see commit 19914edc5a0202cc7830f819ffac7e7b2368166a
Bob Feng [Wed, 26 Jan 2022 08:29:18 +0000 (16:29 +0800)]
MdeModulePkg: update brotli submodule
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3417
Update the brotli submodule to the latest commit (f4153a0)
so that the build isn't broken in GCC 11 compilers.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Pedro Falcato <pedro.falcato@gmail.com> Signed-off-by: Bob Feng <bob.c.feng@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bob Feng [Wed, 26 Jan 2022 08:30:14 +0000 (16:30 +0800)]
BaseTools: Update brotli submodule
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3417
Update the brotli submodule to the latest commit (f4153a0)
so that the build isn't broken in GCC 11 compilers.
Signed-off-by: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Rebecca Cran [Fri, 4 Feb 2022 19:50:41 +0000 (03:50 +0800)]
BaseTools: Update CLANG{35,38}_WARNING_OVERRIDES to ignore unused vars
Building with the CLANG35 and CLANG38 toolset fails because of variables
which are set but not otherwise used in the RELEASE build.
GCC added -Wno-unused-but-set-variable back in 2016, and later added
-Wno-unused-const-variable. Add those to CLANG35_WARNING_OVERRIDES and
CLANG38_WARNING_OVERRIDES.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Xiaoyu Lu [Mon, 7 Feb 2022 11:50:15 +0000 (19:50 +0800)]
Maintainers.txt: Update email address
Update Email address for Xiaoyu Lu.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Xiaoyu Lu <xiaoyu1.lu@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Leif Lindholm [Mon, 31 Jan 2022 11:14:35 +0000 (11:14 +0000)]
Maintainers.txt: update email for Leif Lindholm
NUVIA inc. was acquired by Qualcomm in March 2021, but we continued
contributions under the existing IDs until the start of this year.
We are now switching to use Qualcomm Innovation Center email, so
update Maintainers.txt to reflect this.
Cc: Andrew Fish <afish@apple.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Leif Lindholm [Mon, 31 Jan 2022 11:11:57 +0000 (11:11 +0000)]
Maintainers.txt: add missing github IDs to OvmfPkf/Fdt reviewers
This section seems to have been missed when introducing github IDs,
so add them.
Cc: Andrew Fish <afish@apple.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Leif Lindholm <leif@nuviainc.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When setting mVirtualMap to NULL also set mVirtualMapMaxIndex to 0.
Without that RuntimeDriverConvertPointer() will go search the ZeroPage
for EFI_MEMORY_DESCRIPTOR entries.
In case mVirtualMapMaxIndex happens to be small small enough that'll go
unnoticed, the search will not find anything and EFI_NOT_FOUND will be
returned.
In case mVirtualMapMaxIndex is big enough the search will reach the end
of the ZeroPage and trigger a page fault.
Fix a Edk2Logger.warn() message format to match the arguments.
We ran into this after a failure in PcdValueInit. The failure was
masked by a new exception, "TypeError: not all arguments converted
during string formatting".
New macro OBJCOPY_STRIPFLAG is added in build_rule.template to replace
'--strip-unneeded -R .eh_frame', so that module can have some unique
objcopy flags for its own purpose.
In tools_def.template, set '--strip-unneeded -R .eh_frame' as default
value of OBJCOPY_STRIPFLAG.
The PPTT parser in AcpiView incorrectly dereferences a pointer to
FlagName when trying to log an error with the PPTT cache flags, which
can lead to random crashes and other errors.
Also fix some spacing in the error message to ensure the message is
printed cleanly.
Signed-off-by: Chris Jones <christopher.jones@arm.com> Reviewed-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove ASSERT() statements that are triggered if a platform provides
an override of PCI ROM attached to a PCI Controller. The PCI Platform
Protocol allows the platform to provide a PCI ROM image for a PCI
Controller. This works for PCI Controllers that do not have an attached
PCI ROM, but the platform is not allowed to replace the PCI ROM for a
PCI Controller that has its own PCI ROM. Removing these ASSERT()
statements enables this additional use case.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
We never run any code at EL0, and so it would seem that any access
permissions set for EL0 (via the AP[1] attribute in the page tables) are
irrelevant. We currently set EL0 and EL1 permissions to the same value
arbitrarily.
However, this causes problems on hardware like the Apple M1 running the
MacOS hypervisor framework, which enters EL1 with SCTLR_EL1.SPAN
enabled, causing the Privileged Access Never (PAN) feature to be enabled
on any exception taken to EL1, including the IRQ exceptions that handle
our timer interrupt. When PAN is enabled, EL1 has no access to any
mappings that are also accessible to EL0, causing the firmware to crash
if it attempts to access such a mapping.
Even though it is debatable whether or not SCTLR_EL1.SPAN should be
disabled at entry or whether the firmware should put all UNKNOWN bits in
all system registers in a consistent state (which it should), using EL0
permissions serves no purpose whatsoever so let's fix that regardless.
Sami Mujawar [Fri, 4 Jun 2021 16:43:37 +0000 (17:43 +0100)]
ArmVirtPkg/Kvmtool: Enable Acpiview
Acpiview is a command line tool allowing to display, dump, or check
installed ACPI tables. Add a 'ACPIVIEW_ENABLE' switch to enable it
on an ArmVirt platform.
The switch is set for the ArmVirtKvmTool platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Sami Mujawar [Tue, 20 Apr 2021 12:53:10 +0000 (13:53 +0100)]
ArmVirtPkg/Kvmtool: Enable ACPI support
A Configuration Manager that uses the Dynamic Tables framework
to generate ACPI tables for Kvmtool Guests has been provided.
This Configuration Manager uses the FdtHwInfoParser module to
parse the Kvmtool Device Tree and generate the required
Configuration Manager objects for generating the ACPI tables.
Therefore, enable ACPI table generation for Kvmtool.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742 Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Sami Mujawar [Tue, 20 Apr 2021 12:37:47 +0000 (13:37 +0100)]
ArmVirtPkg/Kvmtool: Add Configuration Manager
Add Configuration Manager to enable ACPI tables for Kvmtool
firmware. The Configuration Manager for Kvmtool uses the DT
Hardware Information Parser module (FdtHwInfoParser) to parse
the DT provided by Kvmtool. The FdtHwInfoParser parses the DT
and invokes the callback function HW_INFO_ADD_OBJECT to add
the Configuration Manager objects to the Platform Information
repository.
The information for some Configuration Manager objects may not
be available in the DT. Such objects are initialised locally
by the Configuration Manager.
Support for the following ACPI tables is provided:
- DBG2
- DSDT (Empty stub)
- FADT
- GTDT
- MADT
- SPCR
- SSDT (Cpu Hierarchy)
- SSDT (Pcie bus)
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Pierre Gondois [Tue, 1 Feb 2022 15:31:53 +0000 (16:31 +0100)]
DynamicTablesPkg: AcpiSsdtPcieLibArm: Remove link device generation
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbder are described in the _PRT entry.
The interrupt type is then assumed by the OS.
The Arm BSA, sE.6 "Legacy interrupts" states that PCI legacy
interrupts must be converted to SPIs, and programmed level-sensitive,
active high. Thus any OS must configure interrupts as such and there
is no need to specify the interrupt type.
Plus it is not possible to dynamically configure PCI interrupts.
Thus remove the link device generation and use the second model
for _PRT.
Pierre Gondois [Tue, 1 Feb 2022 15:30:13 +0000 (16:30 +0100)]
DynamicTablesPkg: AmlLib: AmlAddPrtEntry() to handle GSI
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbers are described in the _PRT entry.
The interrupt type is then assumed by the OS.
AmlAddPrtEntry() currently only handles the first model. Make
changes to also handle the second model.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Rebecca Cran [Thu, 16 Dec 2021 03:46:31 +0000 (20:46 -0700)]
ArmPkg: Replace CoreId and ClusterId with Mpidr in ARM_CORE_INFO struct
Remove the ClusterId and CoreId fields in the ARM_CORE_INFO structure in
favor of a new Mpidr field. Update code in
ArmPlatformPkg/PrePeiCore/MainMPCore and ArmPlatformPkg/PrePi/MainMPCore.c
to use the new field and call new macros GET_MPIDR_AFF0 and GET_MPIDR_AFF1
instead.
Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sunil V L <sunilvl@ventanamicro.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Abner Chang <abner.chang@hpe.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
Check whenever an EDID blob is present. In case it is get the display
resolution from it. Unless PcdVideoResolutionSource indicates the
display resolution has been set already, update
PcdVideoHorizontalResolution and PcdVideoVerticalResolution accordingly.
Also add the resolution to the mode list.
This will make OVMF boot up with the display resolution configured by
QEMU, which is 1280x800 by default. The resolution can be set using the
xres and yres properties. Here is an example for FullHD:
struct QEMU_VIDEO_MODE_DATA has all the data needed to set the video
mode, there is no need to take the extra indirection and use
struct QEMU_VIDEO_BOCHS_MODES.
Gerd Hoffmann [Sat, 29 Jan 2022 16:26:14 +0000 (17:26 +0100)]
OvmfPkg: add PcdVideoResolutionSource
It's a UINT8 (enum) PCD telling where the PcdVideoHorizontalResolution
and PcdVideoVerticalResolution values are coming from. It can be:
0 (unset aka default from dsc file), or
1 (from PlatformConfig), or
2 (set by Video Driver).
It will be used by video drivers to avoid overriding PlatformConfig
values, or override each others values in case multiple display devices
are present.
The underlying problem this tries to solve is that the GOP protocol has
no way to indicate the preferred video mode. On physical hardware this
isn't much of a problem because using the highest resolution available
works just fine as that is typically the native display resolution
But in a virtual machine you don't want come up with a huge 4k window by
default just because the virtual vga is able to handle that. Cutting
down the video mode list isn't a great solution either as that would
also remove the modes from the platform configuration so the user
wouldn't be able to pick a resolution higher than the default any more.
So with patch drivers can use use PcdVideoHorizontalResolution and
PcdVideoVerticalResolution to indicate what the preferred display
resolution is, without overwriting the user preferences from
PlatformConfig if present.
A possible alternative approach would be to extend the GOP protocol, but
I'm not sure this is a good plan given this is mostly a problem for
virtual machines and using PCDs allows to keep this local to OvmfPkg.
Gerd Hoffmann [Fri, 21 Jan 2022 13:00:54 +0000 (14:00 +0100)]
ArmVirtPkg: change qemu default resolution to 1280x800
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
Gerd Hoffmann [Fri, 21 Jan 2022 13:00:53 +0000 (14:00 +0100)]
OvmfPkg: change qemu default resolution to 1280x800
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
Rebecca Cran [Wed, 19 Jan 2022 21:01:16 +0000 (05:01 +0800)]
MdeModulePkg/UefiBootManagerLib: Convert BmLoadOption to Variable Policy
Since the Variable Lock protocol is deprecated, convert locking of
PlatformRecovery#### in EfiBootManagerLoadOptionToVariable to use the
Variable Policy protocol.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhichao Gao <zhichao.gao@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Liu, Zhiguang [Wed, 19 Jan 2022 09:16:46 +0000 (17:16 +0800)]
UefiPayloadPkg: Use BaseCpuTimerLib for Universal Payload by default
Current, a macro CPU_TIMER_LIB_ENABLE is added to determine which timerlib
is used. BaseCpuTimerLib.inf is a better way and only fit for recent CPU.
Meanwhile, Universal Payload are only aimed to work with recent CPU.
Therefore, for Universal Payload, use the BaseCpuTimerLib by default
Cc: Guo Dong <guo.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
CompressedDataLength is declared as UINTN which is UINT64 in X64 arch.
But the second parameter of UefiDecompressGetInfo() is declared as
UINT32. So a build error is triggered. To declare CompressedDataLength
as UINT32 to fix the build error.
Cc: Leif Lindholm <leif@nuviainc.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Abner Chang <abner.chang@hpe.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
Current MM communicate routine from ArmPkg would conduct few checks prior
to proceeding with SMC calls. However, the inspection step is different
from PI specification.
This patch updated MM communicate input argument inspection routine to
assure that "if the `MessageLength` is zero, or too large for the MM
implementation to manage, the MM implementation must update the
`MessageLength` to reflect the size of the `Data` buffer that it can
tolerate", as described by `EFI_MM_COMMUNICATION_PROTOCOL.Communicate()`
section in PI specification.
Cc: Leif Lindholm <leif@nuviainc.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael Kubacki <michael.kubacki@microsoft.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Kun Qin <kuqin12@gmail.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Current MM communicate routine from ArmPkg would conduct few checks prior
to proceeding with SMC calls. However, the inspection step is different
from PI specification.
This patch updated MM communicate input argument inspection routine to
assure `CommSize` represents "the size of the data buffer being passed
in" instead of the size of the data being used from data buffer, as
described by section `EFI_MM_COMMUNICATION2_PROTOCOL.Communicate()` in PI
specification.
Cc: Leif Lindholm <leif@nuviainc.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael Kubacki <michael.kubacki@microsoft.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Kun Qin <kuqin12@gmail.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
projects / mirror_edk2.git / log