Liming Gao [Fri, 22 Apr 2016 07:22:43 +0000 (15:22 +0800)]
MdeModulePkg-FPDT(1): Add SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET definition.
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
A new command SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET is added,
because we need to support get partial PerformanceData to fixed SMM communication
buffer. If performance data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Star Zeng [Fri, 22 Apr 2016 07:18:35 +0000 (15:18 +0800)]
MdeModulePkg-MemoryProfile(3): Use SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET in MemoryProfileInfo.
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
Update MemoryProfileInfo APP to use fixed SMM communication buffer to get
profile data by SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Star Zeng [Fri, 22 Apr 2016 07:16:46 +0000 (15:16 +0800)]
MdeModulePkg-MemoryProfile(2): Add SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET in PiSmmCore.
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
Update PiSmmCore to handle SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Star Zeng [Fri, 22 Apr 2016 07:13:47 +0000 (15:13 +0800)]
MdeModulePkg-MemoryProfile(1): Add SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET definition.
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
A new command SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET is added,
because we need to support get partial ProfileData to fixed SMM communication
buffer. If profile data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Jiewen Yao [Fri, 22 Apr 2016 07:04:45 +0000 (15:04 +0800)]
MdeModulePkg: Add new driver to publish EDKII_PI_SMM_COMMUNICATION_REGION_TABLE.
Add a driver to publish EDKII_PI_SMM_COMMUNICATION_REGION_TABLE, so that
other DXE driver can consume this table directly. NOTE: This is sample driver.
A platform may uses its own way to define default SMM communication buffer
region and publish information in its own
EDKII_PI_SMM_COMMUNICATION_REGION_TABLE.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng, Tian <feng.tian@intel.com>
Jiewen Yao [Fri, 22 Apr 2016 06:59:49 +0000 (14:59 +0800)]
MdeModulePkg: Add EDKII_PI_SMM_COMMUNICATION_REGION_TABLE definition.
This configuration table is used to describe platform pre-allocated memory
for SMM communication buffer. If DXE driver wants to communicate with SMM
agent, it can use this memory as SMM communication buffer instead of allocate
new memory region.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Jiaxin Wu [Fri, 22 Apr 2016 02:55:03 +0000 (10:55 +0800)]
ShellPkg: Enhance ping6 to select the interface automatically
v2:
* Refine the code to make it more readable.
This patch is used to support no source IP specified case while
multiple NICs existed in the platform. The command will select the
first both connected and configured interface automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 19 Apr 2016 01:49:01 +0000 (09:49 +0800)]
ShellPkg: Enhance ping to select the interface automatically
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Feng Tian [Tue, 26 Apr 2016 06:49:53 +0000 (14:49 +0800)]
MdeModulePkg/NvmExpressDxe: comments update to meet implementation
Cc: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Wu, Hao A <hao.a.wu@intel.com>
Reviewed-by: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Jiewen Yao [Fri, 22 Apr 2016 02:23:19 +0000 (10:23 +0800)]
MdePkg: Add WSMT definition.
This patch adds Windows SMM Security Mitigation
Table @ http://download.microsoft.com/download/1/8/A/
18A21244-EB67-4538-BAA2-
1A54E0E490B6/WSMT.docx
Cc: "Gao, Liming" <liming.gao@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Zhang, Chao B [Wed, 13 Apr 2016 08:25:50 +0000 (16:25 +0800)]
SecuritPkg: DxeImageVerificationLib: Fix wrong verification logic in DBX & DBT
In image verification, if image verified pass in DBT, still need to verify if it is blocked by any other cert/cert hash from DBX.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Dick Wilkins <dick_wilkins@phoenix.com>
Jeff Fan [Thu, 21 Apr 2016 02:28:17 +0000 (10:28 +0800)]
UefiCpuPkg/MtrrLib: Remove the loop of calculating Fixed-MTRR Mask
Introduce the 32bit mask seeds to calculate Fixed-MTRR or&and mask values. It
could avoid the loop operation and 64bit shift operations.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Jeff Fan [Wed, 20 Apr 2016 08:58:24 +0000 (16:58 +0800)]
UefiCpuPkg/MtrrLib: Remove the loop of calculating byte offset in MSR
Calculate byte offset in MSR directly and removing the loop.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Jeff Fan [Wed, 20 Apr 2016 08:51:46 +0000 (16:51 +0800)]
UefiCpuPkg/MtrrLib: Reduce the loop time to get fixed-MTRR MSR index
Add input fixed-MTRR MSR index to be start MSR index to avoid finding fixed-MTRR
MSR index from 0 at each time.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Samer El-Haj-Mahmoud [Wed, 27 Apr 2016 22:55:09 +0000 (15:55 -0700)]
ShellPkg: Update smbiosview for latest Type 17 devices
Update smbiosview to understand latest SMBIOS Type 17 devices from
SMBIOS 3.0.0 spec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Laszlo Ersek [Wed, 27 Apr 2016 16:01:02 +0000 (18:01 +0200)]
OvmfPkg: PlatformBdsLib: lock down SMM regardless of S3
At the moment, the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is only installed if
S3 is enabled -- at the end of SaveS3BootScript().
While a runtime OS is never booted with SMM unlocked (because the SMM IPL
locks down SMM as a last resort:
> SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To
> Boot signal
> SmmInstallProtocolInterface: [EfiSmmReadyToLockProtocol] 0
> Patch page table start ...
> Patch page table done!
> SMM IPL locked SMRAM window
), we shouldn't allow UEFI drivers and applications either to mess with
SMM just because S3 is disabled. So install
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL in PlatformBdsInit() unconditionally.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 27 Apr 2016 15:37:42 +0000 (17:37 +0200)]
OvmfPkg: PlatformBdsLib: lock down SMM in PlatformBdsInit()
OVMF's PlatformBdsLib currently makes SMM vulnerable to the following
attack:
(1) a malicious guest OS copies a UEFI driver module to the EFI system
partition,
(2) the OS adds the driver as a Driver#### option, and references it from
DriverOrder,
(3) at next boot, the BdsEntry() function in
"IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" processes
Driver#### and DriverOrder between the calls to PlatformBdsInit() and
PlatformBdsPolicyBehavior(),
(4) OVMF locks down SMM only in PlatformBdsPolicyBehavior(), hence the
driver runs with SMM unlocked.
The BdsEntry() function of the MdeModulePkg BDS driver (in file
"MdeModulePkg/Universal/BdsDxe/BdsEntry.c") recommends to "Signal
ReadyToLock event" in PlatformBootManagerBeforeConsole() -- which
corresponds to PlatformBdsInit() --, not in
PlatformBootManagerAfterConsole() -- which corresponds to
PlatformBdsPolicyBehavior().
Albeit an independent question, but it's worth mentioning: this patch also
brings OvmfPkg's PlatformBdsInit() closer to ArmVirtPkg's. Namely, the
latter signals End-of-Dxe in PlatformBdsInit() already.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 27 Apr 2016 17:28:44 +0000 (19:28 +0200)]
MdeModulePkg: PiDxeS3BootScriptLib: honor PcdAcpiS3Enable
In the edk2 tree, there are currently four drivers that consume
PcdAcpiS3Enable:
IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
MdeModulePkg/Universal/Acpi/SmmS3SaveState/SmmS3SaveState.inf
From these, AcpiS3SaveDxe is the only one that isn't also a client of the
S3BootScriptLib class; all the others (BootScriptExecutorDxe,
S3SaveStateDxe, SmmS3SaveState) are clients of the S3BootScriptLib class.
In turn, the edk2 tree contains only one non-Null instance of the
S3BootScriptLib class:
MdeModulePkg/Library/PiDxeS3BootScriptLib/DxeS3BootScriptLib.inf
Therefore we can safely state that BootScriptExecutorDxe, S3SaveStateDxe,
and SmmS3SaveState are all linked against PiDxeS3BootScriptLib.
Now, if PcdAcpiS3Enable is FALSE when either of BootScriptExecutorDxe,
SmmS3SaveState, or SmmS3SaveState is dispatched, then the following
happens:
- The constructor of PiDxeS3BootScriptLib, function
S3BootScriptLibInitialize(), registers a protocol installation callback
for gEfiDxeSmmReadyToLockProtocolGuid. Namely, the function
S3BootScriptEventCallBack().
- The driver immediately exits with EFI_UNSUPPORTED from its entry point
function, upon seeing PcdAcpiS3Enable == FALSE. (See commits
800c02fbe2da6,
125e093876414, and
d2d38610603f6.)
- This leaves a dangling callback pointer in the DXE core.
- When Platform BDS installs gEfiDxeSmmReadyToLockProtocolGuid (which is a
valid thing to do for locking down SMM, even in the absence of S3
support!), things blow up.
Fix this issue by returning immediately from S3BootScriptLibInitialize()
if PcdAcpiS3Enable is FALSE -- it is useless to initialize the library
instance if the containing driver module exits first thing in its entry
point.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Jiaxin Wu [Wed, 27 Apr 2016 06:29:29 +0000 (14:29 +0800)]
NetworkPkg: Fix incorrect buffer free in HttpDxe
FragmentBuffer of each TcpWrap in HttpDxe should not be
freed in HttpTcpTokenCleanup(). This buffer points to
HttpMsg body actually, which is the responsibility of the
caller to allocate a buffer for Body.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Jiaxin Wu [Tue, 26 Apr 2016 08:46:33 +0000 (16:46 +0800)]
NetworkPkg: Avoid the indefinite wait case in HttpDxe
Need the timer check to avoid the indefinite wait case
in HttpDxe driver
A.HTTP receive Header process in HttpTcpReceiveHeader();
B.HTTP receive Body process in HttpTcpReceiveBody();
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Liming Gao [Fri, 8 Apr 2016 06:34:03 +0000 (14:34 +0800)]
MdeModulePkg: DxeCore MemoryPool Algorithm Update
Use 128 bytes as the start size region to be same to previous one.
64 bytes is small as the first range. On X64 arch, POOL_OVERHEAD
takes 40 bytes, the pool data less than 24 bytes can be fit into
it. But, the real allocation is few that can't reduce its free pool
link list. And, the second range (64~128) has more allocation
that also increases the free pool link list of the first range.
Then, the link list will become longer and longer. When LinkList
check enable in DEBUG tip, the long link list will bring the
additional overhead and bad performance. Here is the performance
data collected in our X64 platform with DEBUG enable.
64 byte: 22 seconds in BDS phase
128 byte: 19.6 seconds in BDS phase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tapan Shah [Wed, 27 Apr 2016 14:55:39 +0000 (07:55 -0700)]
ShellPkg: Fix typos and EDK2 coding style issues
Fixing typos and EDK2 coding style issues found from previous submit
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Abdul Lateef Attar [Thu, 21 Apr 2016 11:24:14 +0000 (04:24 -0700)]
ShellPkg: Fix pci command for '_e' option
ShellPkg: Fix pci command for '_e' option
Processing of '_e' argument was missing.
Added fix, to process the '_e' option
for printing additional AER information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Dandan Bi [Wed, 20 Apr 2016 04:59:47 +0000 (12:59 +0800)]
MdeModulePkg: Export ConfigResp only for form Package after ReadyToBoot
The Hii runtime support feature will export the content of
HiiDatabase and the ConfigResp string to runtime buffer
after ReadyToBoot event is triggered. If some drivers
add/update/remove packages from Hiidatabase after ReadyToBoot:
Originally we will both export the content of HiiDatabase and
the ConfigResp string for all packages.
But now after investigation, we found only for form packages need
to export the content of HiiDatabase and the ConfigResp string,
for other packages just need to export the content of HiiDatabase.
Now to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Dandan Bi [Tue, 26 Apr 2016 08:17:11 +0000 (16:17 +0800)]
MdeModulePkg: BOOLEAN type needn't to compare to TRUE/FALSE explicitly
Fix this issue to follow the coding style.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Liming Gao [Mon, 18 Apr 2016 01:39:19 +0000 (09:39 +0800)]
MdeModulePkg: Add description to MdeModulePkg AcpiTable driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Nagaraj Hegde [Mon, 4 Apr 2016 10:09:28 +0000 (18:09 +0800)]
NetworkPkg:HttpDxe:Consume DxeHttpLib API changes
HttpGenRequestString is updated to HttpGenRequestMessage,
with an additional argument. This patch updates the caller
of the DxeHttpLib API. Also, we will avoid adding any '\0'
to the string, which was added to make AsciiStrLen to
work on the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Nagaraj Hegde [Mon, 4 Apr 2016 10:09:27 +0000 (18:09 +0800)]
MdeModulePkg:DxeHttpLib: Update to DxeHttpLib API
Rename and update the logic of HttpGenRequestString API provided
by DxeHttpLib. The RequestString size is returned as an argument.
The user is not expected to do a AsciiStrLen anymore, and is not
logical too, since request string can contain message body and
using AsciiStrLen on such a string can provide truncated lengths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Fu Siyuan [Mon, 25 Apr 2016 07:29:26 +0000 (15:29 +0800)]
NetworkPkg: Allow user to create a HTTP corporate boot option in setup page.
This patch updates the HTTP Boot Configuration page to allow the user to create
a corporate mode HTTP boot option, by leaving the URI string empty.
The patch also fix a bug that the L"https://" should use StrnCmp() with Length 8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Nagaraj Hegde [Tue, 26 Apr 2016 03:46:45 +0000 (11:46 +0800)]
MdePkg:Http11.h: Add defines for "Expect" header
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Yonghong Zhu [Fri, 22 Apr 2016 07:08:47 +0000 (15:08 +0800)]
BaseTools: Fix the bug for .aml to use ASL binary type in Asbuilt inf
Per build spec, the .aml file should use ASL binary type in the Asbuilt
inf file. the original bug is .aml file may use BIN as binary type when
the module type is not BASE or USER_DEFINED. This patch 1) fix this bug.
2) fix some indent coding style issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Thu, 21 Apr 2016 06:50:30 +0000 (14:50 +0800)]
BaseTools: Update FMP Capsule support to follow FDF spec
Current the FMP Capsule feature is supported, but its format has a little
different with FDF spec. so this patch 1) Align the FMP Capsule with FDF
spec. 2) fix some style issue, eg: Tab. 3) Add a SectionParser function to
check the section header info since this method is used in 7 places.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Laszlo Ersek [Tue, 26 Apr 2016 11:57:32 +0000 (13:57 +0200)]
OvmfPkg: SataControllerDxe: SataControllerStop: fix use after free
It would be possible to remove the UAF without local variables, by calling
SataPrivateData->PciIo->Attributes() before releasing SataPrivateData.
However, by keeping the location of the call (for which temporary
variables are necessary), we continue to match the error path logic in
SataControllerStart(), which is always recommended.
Reported-by: wang xiaofeng <winggundum82@163.com>
Fixes: bcab71413407e61c144994925556725dd65eede9
Cc: wang xiaofeng <winggundum82@163.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Tue, 26 Apr 2016 11:51:55 +0000 (13:51 +0200)]
OvmfPkg: SataControllerDxe: SataControllerStop: remove useless null check
"ASSERT (SataPrivateData != NULL)" is just a few lines higher up.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Star Zeng [Fri, 22 Apr 2016 06:31:10 +0000 (14:31 +0800)]
MdeModulePkg DxeCore: Check free memory type by CoreUpdateProfile()
It can improve profile performance, especially when
PcdMemoryProfileMemoryType configured without EfiBootServicesData.
CoreUpdateProfile() can return quickly, but not depend on the further
code to find the buffer not recorded and then return.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tian Feng [Tue, 24 Nov 2015 08:45:44 +0000 (16:45 +0800)]
MdeModulePkg/NvmExpress: Clean Phase/CqHdbl/SqTdbl fields to restart HC
Phase Tag, SqTdbl/CqHdbl and SqBuffer/CqBuffer should be cleared in
NvmeControllerInit() to make HC functionality work when user invokes
NvmeBlockIoReset().
Cc: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Feng Tian [Tue, 26 Apr 2016 07:16:26 +0000 (15:16 +0800)]
MdeModulePkg/NvmExpress: Fix bug of handling not null-terminated strings
In EnumerateNvmeDevNamespace(), when Private->ControllerData->Sn and/or
Private->ControllerData->Mn are NOT null-terminated strings,
UnicodeSPrintAsciiFormat(…) may generate unexpected (garbage) output
string.
Cc: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tian Feng [Tue, 24 Nov 2015 06:35:28 +0000 (14:35 +0800)]
MdeModulePkg/NvmExpress: Fix mem leak in error handling of Start()
Memory pointed to by Private->ControllerData has not been freed up
correctly at error handling path.
Cc: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Simon (Xiang) Lian-SSI <simon.lian@ssi.samsung.com>
Feng Tian [Fri, 15 Apr 2016 07:48:22 +0000 (15:48 +0800)]
MdeModulePkg/EmmcDxe: Fix wrong coding style on close brace
The close brace of EmmcDxeComponentNameGetControllerName should be
at the beginning of a line.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Feng Tian [Fri, 15 Apr 2016 07:45:20 +0000 (15:45 +0800)]
MdeModulePkg/EmmcDxe: Fix wrong typo on function comments
Cc: Qiu Shumin <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Feng Tian [Fri, 15 Apr 2016 07:43:31 +0000 (15:43 +0800)]
MdeModulePkg/Sd: Not explicitly compare BOOLEAN type with TRUE/FALSE
It's coding style update to follow EDKII coding style doc.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Feng Tian [Fri, 1 Apr 2016 08:37:53 +0000 (16:37 +0800)]
MdeModulePkg/MdeModulePkg.uni: Add SD related PCD description
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Qiu Shumin [Mon, 25 Apr 2016 02:08:30 +0000 (10:08 +0800)]
ShellPkg: Fix Shell treats every .EFI file as an executable application.
UEFI Shell 2.x cannot recognize whether a .EFI file is an application or
a driver. This means when we typed in a driver image in Shell command
line, Shell will load the driver image and try to run the entry point
function of the driver.
This patch check the ImageCodeType to fix the issue.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Hess Chen [Fri, 22 Apr 2016 05:23:38 +0000 (13:23 +0800)]
BaseTools/UPT: UPT to Support UTF-8
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Hess Chen [Fri, 22 Apr 2016 05:18:42 +0000 (13:18 +0800)]
BaseTools/ECC: Remove UNI checkpoint from ECC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Hess Chen [Fri, 22 Apr 2016 04:50:23 +0000 (12:50 +0800)]
Update ECC to support more doxygen keywords
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tapan Shah [Fri, 22 Apr 2016 16:32:26 +0000 (09:32 -0700)]
ShellPkg: Enahance 'dh' command to add more protocols decoding support
Adding EdidDiscovered, EdidActive protocol decode support a in 'dh' command.
Extending GraphicsOutput protocol decoding to list all supported GOP resolutions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Heyi Guo [Sat, 23 Apr 2016 14:39:59 +0000 (22:39 +0800)]
ArmPkg/Gic: Fix boundary checking bug
mGicNumInterrupts is the total number of interrupts, so the interrupt
ID equal to mGicNumInterrupts is also invalid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Dandan Bi [Fri, 22 Apr 2016 03:29:12 +0000 (11:29 +0800)]
MdeModulePkg/SetupBrowserDxe: Remove the useless check
When the type of HiiValue is BUFFER Type, the BufferValue
of the related question can not be NULL, so can remove the
check.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Ruiyu Ni [Fri, 22 Apr 2016 09:08:49 +0000 (17:08 +0800)]
MdeModulePkg/DxeCore: Avoid assertion in CoreLocateProtocol
The patch uses CoreAcquireLockOrFail() instead of
CoreAcquireProtocolLock() in CoreLocateProtocol() to avoid
assertion when CoreLocateProtocol() is called with the
protocol database locked.
The issue was found when changing PcdDebugPrintErrorLevel to
enable page/pool allocation debug message.
Nt32 platform hangs immediately after DxeCore is loaded.
Investigation shows the following calling stacks:
DxeCore entry point (Install a certain protocol)
0 DxeCore::CoreInstallProtocolInterface // Protocol DB is locked
1 DxeCore::AllocatePool
2 PeiDxeDebugLibReportStatusCode::DebugPrint
3 DxeReportStatusCodeLib::ReportStatusCodeEx // <-------------------|
4 DxeReportStatusCodeLib::InternalGetReportStatusCode |
5 DxeCore::LocateProtocol(StatusCodeRuntimeProtocol) |
// Assertion when locking Protocol DB 2nd time |
6 DxeCore::CoreAcquireProtocolLock |
7 PeiDxeDebugLibReportStatusCode::DebugAssert |
8 DxeReportStatusCodeLib::ReportSatusCodeEx // loop begins ---------
In frame #6 the assertion is triggered due to the protocol database
is already locked. #8 calls #4 and the loop begins.
After changing #6 to CoreAcquireLockOrFail(), the assertion is
avoided and the loop is broken.
With the fix, NT32 can boot to Shell even setting
PcdDebugPrintErrorLevel to 0xFFFFFFFF, with all error levels turned
on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Liming Gao [Fri, 15 Apr 2016 03:50:25 +0000 (11:50 +0800)]
MdeModulePkg: Correct PlatformHookLibSerialPortPpi module type.
This library instance is PEIM type, not BASE type. It has the PPI
dependency for PEIM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Zhang Lubo [Fri, 22 Apr 2016 08:54:50 +0000 (16:54 +0800)]
NetworkPkg: Fix GCC code build error of iSCSI driver.
Fix GCC build error when refine the codes of iSCSI driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Zhang Lubo [Fri, 22 Apr 2016 08:52:29 +0000 (16:52 +0800)]
MdeModulePkg: Fix GCC code build error of iSCSI driver.
Fix GCC build error when refine the codes of iSCSI driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Jordan Justen [Wed, 6 Apr 2016 07:09:57 +0000 (00:09 -0700)]
Vlv2TbltDevicePkg: Convert to build FatPkg from source
Now that FatPkg is open source (and therefore in the EDK II tree) we
can build and use it directly.
Note: Not build tested
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tim He <tim.he@intel.com>
Jordan Justen [Wed, 6 Apr 2016 06:11:26 +0000 (23:11 -0700)]
FatBinPkg: Change to 2-clause BSD license
The FatPkg is now open source. Update FatBinPkg license to match
FatPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Jordan Justen [Wed, 6 Apr 2016 06:07:19 +0000 (23:07 -0700)]
FatPkg: Add Contributions.txt
This is copied from MdePkg/Contributions.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Jordan Justen [Wed, 6 Apr 2016 06:03:10 +0000 (23:03 -0700)]
FatPkg: Update License.txt to have the full license text
A script was used to convert the license text for the entire FatPkg.
It used the shorter BSD text that we use in most files:
This program and the accompanying materials are licensed and made
available under the terms and conditions of the BSD License which
accompanies this distribution. The full text of the license may be
found at http://opensource.org/licenses/bsd-license.php
The script also used the short version in FatPkg/License.txt. In each
package's License.txt, we normally include the full BSD license text.
This change copies the longer version of License.txt from MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Zhang Lubo [Fri, 22 Apr 2016 07:18:56 +0000 (15:18 +0800)]
NetworkPkg: refine codes of iSCSI driver.
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Zhang Lubo [Fri, 22 Apr 2016 07:18:40 +0000 (15:18 +0800)]
MdeModulePkg: refine codes of iSCSI driver.
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Star Zeng [Wed, 20 Apr 2016 09:27:40 +0000 (17:27 +0800)]
MdeModulePkg DxeCore: Enhance MemoryAttributesTable installation
Current MemoryAttributesTable will be installed on ReadyToBoot event
at TPL_NOTIFY level, it maybe incorrect when PcdHiiOsRuntimeSupport
= TRUE as HiiDatabaseDxe will have runtime memory allocation for HII
OS runtime support on and after ReadyToBoot. The issue was exposed at
http://article.gmane.org/gmane.comp.bios.edk2.devel/10125.
To make sure the correctness of MemoryAttributesTable, this patch is
to enhance MemoryAttributesTable installation to install
MemoryAttributesTable on ReadyToBoot event at TPL_CALLBACK - 1 level
to make sure it is at the last of ReadyToBoot event, and also hook
runtime memory allocation after ReadyToBoot.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Star Zeng [Mon, 11 Apr 2016 03:00:47 +0000 (11:00 +0800)]
MdeModulePkg DxeCore: Return memory type from internal free pool/pages
The following patch for MemoryAttributesTable will need the memory type.
And CoreUpdateProfile() can also use the memory type for check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Star Zeng [Wed, 20 Apr 2016 08:19:01 +0000 (16:19 +0800)]
MdeModulePkg DxeCore: Fix a memory leak in InstallMemoryAttributesTable()
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Dandan Bi [Thu, 21 Apr 2016 01:05:47 +0000 (09:05 +0800)]
MdeModulePkg/HiiDatabaseDxe: Fix the VS2010/VS2012 build fail
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Star Zeng [Thu, 21 Apr 2016 01:47:00 +0000 (09:47 +0800)]
MdeModulePkg DxeCore: Call PeCoffExtraActionLib member after Constructor
Originally, the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" was after ProcessLibraryConstructorList(). To fix an issue,
ProcessLibraryConstructorList() was moved to be right after CoreInitializeGcdServices()
at
c5d5379937629f3061d08b8d9a3386a40152ca2c, but the code block was left.
As there maybe PeCoffExtraActionLib implementation need Constructor executed first,
the patch is to move the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" to be after ProcessLibraryConstructorList.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Feng Tian [Tue, 12 Apr 2016 06:08:49 +0000 (14:08 +0800)]
MdeModulePkg/Sd: wait 1ms before check DATA line in voltage switch proc
According to SD Host Controller 3.0 spec figure 3-10, we have to wait
1ms before checking DAT[3:0] in voltage switch proc
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Feng Tian [Tue, 12 Apr 2016 05:57:48 +0000 (13:57 +0800)]
MdeModulePkg/SdMmcPciHc: Reset the slot when sd device is connected
The original code doesn't reset the slot when there is device change.
It may bring issue on device identification procedure of some SD cards.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Feng Tian [Wed, 6 Apr 2016 01:52:08 +0000 (09:52 +0800)]
MdeModulePkg/Sd: Fix wrong response type of SD Deselect cmd
The SD CMD7 deselect cmd have no response according to SD
physical layer simplified spec.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Feng Tian [Thu, 7 Apr 2016 08:28:56 +0000 (16:28 +0800)]
MdeModulePkg/Sd: update the sd detection logic
If there is no card presented before power on, there would
have no card change interrupt generated. This is a corner
case which can't be handled by old logic.
The patch is used to move card present detection in the front
of card change interrupt detection.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Feng Tian [Fri, 8 Apr 2016 05:43:49 +0000 (13:43 +0800)]
MdeModulePkg/Usb: Fix wrong condition judgment to support usb3.1 dev
The bcdUSB value of usb3.1 is 0x0310, we update the condition judgment
to get correct max packet size for usb3.1 dev.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Feng Tian [Fri, 1 Apr 2016 08:37:53 +0000 (16:37 +0800)]
MdeModulePkg/UsbKbDxe: don't assert when the key read is invalid
The GetKeyDescriptor() may return NULL when the KeyData is invalid.
For such case, we should go to error handling path rather than assert
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Qiu Shumin [Mon, 18 Apr 2016 07:59:58 +0000 (15:59 +0800)]
ShellPkg: Support connect a device handle recursively with '-r'.
This patch make Shell 'connect' a device handle recursively with
'-r' option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Yonghong Zhu [Wed, 20 Apr 2016 01:32:52 +0000 (09:32 +0800)]
BaseTools: add the support for --pcd feature to patch the binary efi
the original --pcd feature can override the Pcd value when build the
source driver, while it missed the binary driver. this patch add the
support to patch the binary efi for --pcd feature.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Tue, 12 Apr 2016 02:31:55 +0000 (10:31 +0800)]
BaseTools: Add mixed PCD support feature
Problem statement:
The current build system requires that a PCD must use the same access
method for all modules. A Binary Module may use a different PCD access
method than: 1.A source tree build it is integrated into. 2.Other Binary
Modules in platform build that use the same PCD.
Solution:
1. Source build:
No change. PCDs must use the same access method for building all Source
Modules.
2. Mixed Source & Binary Builds or Binary Only Builds:
1) Source Modules - No changes
2) Module that is interpreted as a Binary Module
a.DSC file may optionally override default value of PatchableInModule
PCDs in scope of Binary Module.
b.DSC file must declare DynamicEx PCD subtype for all DynamicEx PCDs
from Binary Modules.
c.FDF file must list Binary Module INF
Build update:
1. PCDs in a binary module are permitted to use the PatchableInModule
or DynamicEx access methods (the Binary INF clearly identifies the PCD
access method for each PCD). The build must support binary modules that
use the same or different PCD access method than the Source INFs or
other Binary INFs.
2. Build report list PCDs that have mixed PCD access methods.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Volker Rümelin [Mon, 18 Apr 2016 19:51:30 +0000 (21:51 +0200)]
OvmfPkg: AcpiPlatformDxe: Don't enable unsupported PCI attributes
Current code in PciEnableDecoding tries to unconditionally enable
EFI_PCI_IO_ATTRIBUTE_IO and EFI_PCI_IO_ATTRIBUTE_MEMORY even if they
are unsupported attributes. This fails on devices which don't
support both attributes.
This patch masks out unsupported attributes.
Information to reproduce the bug.
Host lspci -s 0000:04:00.0 -vnn:
04:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB
3.0 Host Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Flags: fast devsel, IRQ 19
Memory at
ef900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable- Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Latency Tolerance Reporting
Kernel driver in use: pci-stub
Kernel modules: xhci_pci
libvirt xml:
<hostdev mode='subsystem' type='pci' managed='yes'>
<driver name='vfio'/>
<source>
<address domain='0x0000' bus='0x04' slot='0x00' function='0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x11'
function='0'/>
</hostdev>
OVMF debug log with additional DEBUG statement:
OnRootBridgesConnected: root bridges have been connected, installing
ACPI tables
Select Item: 0x19
EnablePciDecoding: GetLocation: D=0000:00:00.0
OrigAttr=
0000000000004000 SuppAttr=
000000000000E700
EnablePciDecoding: GetLocation: D=0000:00:10.0
OrigAttr=
0000000000004000 SuppAttr=
000000000000E700
EnablePciDecoding: GetLocation: D=0000:00:11.0
OrigAttr=
0000000000004000 SuppAttr=
000000000000E600
EnablePciDecoding: EfiPciIoAttributeOperationEnable: Unsupported
Select Item: 0x28
Select Item: 0x19
Select Item: 0x2A
Select Item: 0x19
Select Item: 0x27
InstallQemuFwCfgTables: installed 6 tables
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Yonghong Zhu [Tue, 19 Apr 2016 02:43:57 +0000 (10:43 +0800)]
BaseTools: fix a bug for PEI VPD Pcd collection
When a PEI phase VPD PCD only list in the DSC IA32 arch, then build X64
arch image, it missed to collect this PEI VPD pcd into VPD Pcd map file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Mon, 18 Apr 2016 07:38:15 +0000 (15:38 +0800)]
BaseTools/GenFds: remove the old logic since ActivePlatform is abs. path
We can support the DSC file out of workspace. this old logic first make
the absolute path to relative path and strips the leading slash off,
then append it to workspace. it cause GenFds failure on Linux when the
DSC file is out of workspace. Since we make sure the ActivePlatform is
abs. path, so we don't need this old logic to change the abs. path to
relative.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin Haeuser <marvin.haeuser@outlook.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Fri, 15 Apr 2016 08:46:48 +0000 (16:46 +0800)]
BaseTools: enhance error handling for DSC file
Add logic for DSC file validation for Prebuild init. Add logic to detect
error for DSC parser when '{' is missing.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Wed, 13 Apr 2016 08:47:25 +0000 (16:47 +0800)]
MdeModulePkg/HiiDatabaseDxe: Support EfiVarStore to get AltCfg from Driver
Allow EfiVarStore to get <AltResp> from Hii Driver, and enhance code logic
in MergeDefaultString function to get a full AltCfgResp.
The logic in function MergeDefaultString after enhancement:
(1) If there are no <AltResp> in AltCfgResp, merge the <AltResp> in
DefaultAltCfgResp to AltCfgResp.
(2) If there are <AltResp> in AltCfgResp, for the same <AltConfigHdr>, if
the <ConfigElement> already in AltCfgResp, don't need to merge from
DefaultAltCfgResp, else merge the <ConfigElement> in the DefaultAltCfgResp
to the related <AltResp> in AltCfgResp.
AltCfgResp: Generated by Driver.
DefaultAltCfgResp: Generated by HiiDatabase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Tue, 12 Apr 2016 02:53:42 +0000 (10:53 +0800)]
MdeModulePkg/HiiDatabaseDxe: Correct the ReallocatePool size
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Fri, 15 Apr 2016 05:25:55 +0000 (13:25 +0800)]
MdeModulePkg/DriverSampleDxe: Add a sample case
Add the sample case for orderedlist to get standard
default value from Callback function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Fri, 15 Apr 2016 05:18:41 +0000 (13:18 +0800)]
MdeModulePkg/SetupBrowserDxe: Get default from callback for orderedList
For orderedlist question, the value is stored in a buffer,
not in HiiValue. So when need to get default value from callback
function for orderedlist, need to pass the buffer.
This patch is to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zhang, Chao B [Wed, 13 Apr 2016 07:27:04 +0000 (15:27 +0800)]
SecurityPkg: AuthVariableLib & SecureBootConfigDxe: Fix SecureBootEnable & PK inconsistency issue
Revert previous fix in AuthVariable driver init which breaks SecureBootEnable original behavior. Add more error handling logic in SecureBootConfigDxe to prevent wrong display info when SecureBootEnable & PK inconsistency happens.
Commit hash for the reverted patch in AuthVariable driver is
SHA-1:
a6811666b0bef18871fa62b6c5abf18fb076fd0d
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Thomas Palmer [Sat, 16 Apr 2016 01:45:02 +0000 (09:45 +0800)]
BaseTools/Build: Consider only build-specified architectures
When building for any specific architecture, the build script today
is loading DSC sections for other architectures not in the build.
The build process should disregard DSC sections that are not
relevant to the build.
This fixes scenario whereby a build occurs in a source tree that was
been cleaned of non-essential directories. For instance, X64 builds
do not require the ArmPkg directory to build a firmware image. This
condition (build break when ArmPkg is absent) occurs when included
DSCs have sections for multiple architectures.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Jiaxin Wu [Tue, 12 Apr 2016 03:57:54 +0000 (11:57 +0800)]
ShellPkg: Update ping command options to sync with Spec
This patch is used to update ping command options to sync
with shell2.2 Spec.
Considering the backward compatible issue, the patch keeps
‘-_s’ command option unchanged, only add the new option '-s'
and make the old option '-_s' function same as new one.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Ard Biesheuvel [Thu, 31 Mar 2016 07:27:38 +0000 (09:27 +0200)]
ArmPlatformPkg/DS-5: fix 64-bit PE/COFF header parsing bug
The 64-bit version of the DS-5 debug script that retrieves the debug file
path from the PE/COFF image in memory assumes that the PE/COFF header is
packed, and that the debug directory entry in the optional header appears
at a fixed offset into the file. This is no longer true, now that we pad
between the file header and the PE header if the section alignment exceeds
the size of the header (which may be the case when the module contains a
vector table or small model code, which requires 2 KB or 4 KB section
alignment, respectively), to allow this padding to be emitted if the image
is subsequently converted to TE format.
So replace the fixed offset with a dereference of the appropriate header
field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Hao Wu [Fri, 25 Mar 2016 01:46:58 +0000 (09:46 +0800)]
MdeModulePkg NvmExpressDxe: Ensure write-through for NVMe write command
Set the Force Unit Access (FUA) bit in NVMe Write - Command Dword 12 to
ensure write-through behavior.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Marvin H?user [Thu, 14 Apr 2016 20:48:31 +0000 (04:48 +0800)]
EdkCompatibilityPkg: Fix a typo.
Fix a typo and a spacing mistake in EfiCommonLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Marvin H?user [Thu, 14 Apr 2016 20:48:24 +0000 (04:48 +0800)]
EdkCompatibilityPkg: Do not cast VA_LIST to a pointer for AARCH64.
Do not cast VA_LIST to a pointer for the AARCH64 architecture in
EfiCommonLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Qiu Shumin [Tue, 12 Apr 2016 07:06:07 +0000 (15:06 +0800)]
PerformancePkg: Make Dp print help information with -? flag in Shell.
Since Shell supports finding help information from resource section
of application image. We enhance the Dp to add help information
string. After the Dp are loaded in system the help string will
be stored in resource section of the application image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Qiu Shumin [Fri, 1 Apr 2016 01:02:20 +0000 (09:02 +0800)]
ShellPkg : Cache the environment variable into memory to enhance
the performance.
Currently UEFI Shell reads variable storage to get the environment
variables every time running a new command. And reading(writing)
UEFI variables is a high cost operation on most platforms. In order
to enhance the performance this patch read the variable storage once
and cache the environment variables in memory. Every further 'set'
command will save the variable not only to Shell cache, but also the
flash variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by:Ruiyu Ni <ruiyu.ni@intel.com>
Marvin.Haeuser@outlook.com [Thu, 14 Apr 2016 16:28:19 +0000 (00:28 +0800)]
BaseTools: Fix PLATFORM_DIR variable value.
In commit
017fb1cd4c5e3c8b914eb217ac1760223687dad7, the PLATFORM_DIR
macro has been updated to resolve to the correct path. However, it is
incorrectly accessed via curved rather than curly braces by GenMake.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Yonghong Zhu [Thu, 14 Apr 2016 02:06:12 +0000 (10:06 +0800)]
BaseTools/VolInfo: Update to handle PE image with .code section only
rebase the image which only has .code section, but no other section, the
tool return error. this patch fix this bug to support it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Thu, 14 Apr 2016 02:04:55 +0000 (10:04 +0800)]
BaseTools/GenFw: Update to handle PE image with .code section only
current GenFw rebase the image which only has .code section, but no other
section, the tool return error. this patch fix this bug to support it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Thu, 14 Apr 2016 15:03:45 +0000 (23:03 +0800)]
BaseTools: Fix the bug to correctly handle the [BuildOptions]
the last fix call os.path.normpath() function, which removes the
trailing slash character, it cause NASM failure for ResetVector
driver.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ard Biesheuvel [Mon, 11 Apr 2016 13:47:24 +0000 (15:47 +0200)]
ArmPkg/AArch64Mmu: disable MMU during page table manipulations
On ARM, manipulating live page tables is cumbersome since the architecture
mandates the use of break-before-make, i.e., replacing a block entry with
a table entry requires an intermediate step via an invalid entry, or TLB
conflicts may occur.
Since it is not generally feasible to decide in the page table manipulation
routines whether such an invalid entry will result in those routines
themselves to become unavailable, use a function that is callable with
the MMU off (i.e., a leaf function that does not access the stack) to
perform the change of a block entry into a table entry.
Note that the opposite should never occur, i.e., table entries are never
coalesced into block entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Heyi Guo [Wed, 6 Apr 2016 15:15:43 +0000 (23:15 +0800)]
EmbeddedPkg/AcpiLib: add GICD table init macro for ACPI 6.0
Add macro to help initialize GICD structure in MADT table according
to ACPI 6.0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Heyi Guo [Thu, 14 Apr 2016 09:24:47 +0000 (17:24 +0800)]
ArmPkg/AArch64Mmu: Fix XN attribute for device memory
Now XN attribute will be set automatically if the region is declared
as device memory. However, the function ArmMemoryAttributeToPageAttribute
is to get attribute for block and page descriptors, not for table
descriptors, so attribute TT_TABLE_*XN does not really take effect.
Need to use TT_*XN_MASK instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Jiaxin Wu [Wed, 13 Apr 2016 03:07:07 +0000 (11:07 +0800)]
NetworkPkg: Fix issue in Ip6Dxe SetData
EFI_NOT_READY should not be treated as an error status
returned from SetData for Ip6ConfigDataTypeManualAddress
since there is an asynchronous operation for DAD process.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Yonghong Zhu [Wed, 13 Apr 2016 08:27:05 +0000 (16:27 +0800)]
BaseTools: fix the bug for [BuildOptions] of multiple workspace support
when enable Multiple workspace and there have other option(eg: -I) before
$(WORKSPACE), handleWsMacro cannot return correct which cause the
ArmVirtPkg build failure.
example:
[BuildOptions]
*_*_AARCH64_PLATFORM_FLAGS == -I$(WORKSPACE)/ArmVirtPkg/Include
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Wed, 13 Apr 2016 05:09:17 +0000 (13:09 +0800)]
BaseTools: fix PLATFORM_DIR variable value for multiple workspace
when enable the multiple workspace, the PLATFORM_DIR still is
$(WORKSPACE)\AnyPkg, even though it is in a PACKAGES_PATH folder. this
patch fix this issue to use the real path.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
projects / mirror_edk2.git / log