Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c: In function ?JudgeHandleIsPCIDevice?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c:164:22: error: variable ?DevicePath? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c: In function ?AddSmbiosT0x90Callback?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c:292:28: error: variable ?ForType90InputData? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorInformationFunction.c: In function ?MiscProcessorInformationFunction?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorInformationFunction.c:191:37: error: variable ?SrcDataSize? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorCacheFunction.c: In function ?MiscProcessorCacheFunction?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorCacheFunction.c:78:34: error: variable ?SrcDataSize? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:35 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/Wpce791: Remove the unused variable
Fix the following error from gcc:
Vlv2TbltDevicePkg/Wpce791/LpcDriver.c: In function ?LpcDriverStart?:
Vlv2TbltDevicePkg/Wpce791/LpcDriver.c:239:27: error: variable ?LpcDev? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
Gary Lin [Fri, 29 Jul 2016 03:25:34 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformDxe: Remove the unused variables
Fix the following errors from gcc:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c: In function ?InitPciDevPME?:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c:516:26: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/Platform.c: In function ?InitThermalZone?:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c:575:26: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/IchRegTable.c: In function ?InitializeSubsystemIds?:
Vlv2TbltDevicePkg/PlatformDxe/IchRegTable.c:111:10: error: variable ?SubsystemAudioVidDid? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c: In function ?InitBadBars?:
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:115:40: error: variable ?PciIoDevice? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:114:39: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c: In function ?ProgramPciLatency?:
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:320:39: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c: In function ?GetIntegratedIntelVbtPtr?:
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c:145:33: error: variable ?VbtSize? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c: In function ?JudgeHandleIsPCIDevice?:
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c:418:22: error: variable ?DevicePath? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:32 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformSetupDxe: Remove the unused variables
Fix the following errors from gcc:
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c: In function ?PrepareSetupInformation?:
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:540:31: error: variable ?EeState? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:532:31: error: variable ?SrcDataSize? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c: In function ?UpdateAdditionalInformation?:
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:818:35: error: variable ?Size? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:817:36: error: variable ?SystemManufacturer? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c: In function ?JudgeHandleIsPCIDevice?:
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:1094:22: error: variable ?DevicePath? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c: In function ?GetChipsetSataPortSpeed?:
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:1470:31: error: variable ?DwordReg? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformSetupDxe/SetupInfoRecords.c:1469:31: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
Gary Lin [Fri, 29 Jul 2016 03:25:30 +0000 (11:25 +0800)]
Vlv2DeviceRefCodePkg/ValleyView2Soc: Remove the unused code
The code in _S3SUPPORT_ in PchAccess.h wasn't used in anywhere. Also,
The declaration of MCRX and MCR made gcc generate the error of
"multiple definition". Just remove the unused code to avoid any
potential issue.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
Gary Lin [Fri, 29 Jul 2016 03:25:28 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/AcpiPlatform: Amend the declaration of mGlobalNvsArea
mGlobalNvsArea wasn't declared as extern in AcpiPlatform.h and the header
was included in AcpiPlatform.c and AcpiPlatformHooks.c. Although it's
declared as extern in AcpiPlatformHooks.c, gcc still created an instance
of mGlobalNvsArea in AcpiPlatformHooks.c since the header was expanded
first and then the linker complained "multiple definition". This commit
rearrange the delaration of mGlobalNvsArea to satisfy gcc.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c: In function 'PlatformUpdateTables':
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:236:63: warning: variable 'LocalApicCounter' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:214:64: warning: variable 'ProcessorLocalApicEntry' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:213:63: warning: variable 'BufferSize' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c: In function 'AcpiPlatformEntryPoint':
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:797:33: warning: variable 'Data32' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatformHooks.c: In function ?PatchGv3SsdtTable?:
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatformHooks.c:243:31: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:26 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformInitPei: Suppress the gcc error message
Fix the following error from gcc:
Vlv2TbltDevicePkg/PlatformInitPei/PlatformEarlyInit.c: In function 'GetWakeupEventAndSaveToHob':
Vlv2TbltDevicePkg/PlatformInitPei/PlatformEarlyInit.c:147:11: error: variable 'WakeEventData' set but not used [-Werror=unused-but-set-variable]
Although the function name is "GetWakeupEventAndSaveToHob",
WakeEventData was never really used or passed to any other function.
Given the fact that the function is served as an example, it'd better to
keep the code related to WakeEventData. Just add a debug statement to
suppress the error message.
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:25 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformInitPei: Remove the unused variables
Fix the following errors from gcc:
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c: In function 'IchRcrbInit':
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c:513:36: error: variable 'PlatformCpuInfo' set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c:512:35: error: variable 'LpcRevisionID' set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformInitPei/MemoryCallback.c: In function 'EndOfPeiPpiNotifyCallback':
Vlv2TbltDevicePkg/PlatformInitPei/MemoryCallback.c:64:31: error: variable 'MemoryTop' set but not used [-Werror=unused-but-set-variable]
v2:
Also remove the variable, Hob, in PchInitPeim.c:IchRcrbInit() since
no one really uses it.
Cc: David Wei <david.wei@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
Gary Lin [Fri, 29 Jul 2016 03:25:24 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformBdsLib: Remove the unused variable
Fix the following error from gcc:
Vlv2TbltDevicePkg/Library/PlatformBdsLib/BdsPlatform.c: In function ?BdsLockFv?:
Vlv2TbltDevicePkg/Library/PlatformBdsLib/BdsPlatform.c:2170:31: error: variable ?Data? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:23 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/PlatformPei: Remove the unused variable
Fix the following error from gcc:
Vlv2TbltDevicePkg/PlatformPei/MemoryCallback.c: In function ?MemoryDiscoveredPpiNotifyCallback?:
Vlv2TbltDevicePkg/PlatformPei/MemoryCallback.c:115:20: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:22 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg/MultiPlatformLib: Remove the unused variables
Fix the following errors from gcc:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/MultiPlatformLib.c: In function ?MultiPlatformInfoInit?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/MultiPlatformLib.c:47:14: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c: In function ?ReadClockGeneratorID?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c:222:33: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c: In function ?ConfigurePlatformClocks?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c:283:33: error: variable ?ClockGenID? set but not used [-Werror=unused-but-set-variable]
Also fix the coding style of MultiPlatformInfoInit()
Cc: David Wei <david.wei@intel.com> Cc: "Wu, Hao A" <hao.a.wu@intel.com> Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: David Wei <david.wei@intel.com>
Gary Lin [Fri, 29 Jul 2016 03:25:21 +0000 (11:25 +0800)]
Vlv2TbltDevicePkg: Only define MDEPKG_NDEBUG for gcc release build
We only enable "-Wno-unused-but-set-variable" for the release build
and gcc would complain that the varible passed to ASSERT_EFI_ERROR
wasn't used in the debug build. Just don't define MDEPKG_NDEBUG for
the debug build to make gcc happy with ASSERT_EFI_ERROR.
Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: David Wei <david.wei@intel.com> CC: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
Hess Chen [Mon, 1 Aug 2016 15:25:34 +0000 (23:25 +0800)]
BaseTool/UPT: Not expand macro for UserExtension
All MACRO values defined by the DEFINE statements
n any section (except [Userextensions] sections
other than TianoCore."ExtraFiles) of the INF or
DEC file must be expanded before processing of the file.
MdeModulePkg/UsbMass: Not retry if usb bot transfer execution fail
The retry mechanism will bring issue if the usb device is unplugged
from XHCI HC but s/w is trying to access it through BlockIo. The
current cmd will get device error return status, but the sequential
cmds will be timeout. This behavior will cause system unresponsive
for a long while and bring bad user experience.
In current code, PSID is processed as string and the length is 0x20.
Current code only reserved 0x20 length buffer for it, no extra buffer
for the '\0'. When driver call UnicodeStrToAsciiStrS to convert PSID,
it search the '\0' for the end. So extra dirty data saved in PSID
info which caused PSID revert action failed. This patch reserved
extra 1 byte data for the '\0'.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Eric Dong <eric.dong@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Cinnamon Shia [Tue, 2 Aug 2016 17:25:10 +0000 (01:25 +0800)]
OvmfPkg: use StatusCode Router and Handler from MdeModulePkg
In the Platform Init v1.4a spec,
- Volume 1 "4.7 Status Code Service" defines the
EFI_PEI_SERVICES.ReportStatusCode() service,
- Volume 1 "6.3.5 Status Code PPI (Optional)" defines the
EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above),
- Volume 2 "14.2 Status Code Runtime Protocol" defines the
EFI_STATUS_CODE_PROTOCOL.
These allow PEIMs and DXE (and later) modules to report status codes.
Currently OvmfPkg uses modules from under
"IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above
abstractions (PPI and PROTOCOL) directly, and write the status codes, as
they are reported, to the serial port or to a memory buffer. This is
called "handling" the status codes.
In the Platform Init v1.4a spec,
- Volume 3 "7.2.2 Report Status Code Handler PPI" defines
EFI_PEI_RSC_HANDLER_PPI,
- Volume 3 "7.2.1 Report Status Code Handler Protocol" defines
EFI_RSC_HANDLER_PROTOCOL.
These allow several PEIMs and runtime DXE drivers to register callbacks
for status code handling.
MdeModulePkg offers a PEIM under
"MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both
EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE
driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe"
that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL.
MdeModulePkg also offers status code handler modules under
MdeModulePkg/Universal/StatusCodeHandler/ that depend on
EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively.
The StatusCodeHandler modules register themselves with
ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI /
EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code
through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches
the phase-matching ReportStatusCodeRouter module first, which in turn
passes the status code to the pre-registered, phase-matching
StatusCodeHandler module.
The status code handling in the StatusCodeHandler modules is identical to
the one currently provided by the IntelFrameworkModulePkg modules. Replace
the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can
decrease our dependency on IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com> Suggested-by: Liming Gao <liming.gao@intel.com> Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63
[jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos] Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
we need to locate the FSP Info Header by calculating offset dynamically to
handle the scenario of FSP component is being rebased to different location.
Cc: Maurice Ma <maurice.ma@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Ard Biesheuvel [Tue, 2 Aug 2016 10:08:03 +0000 (12:08 +0200)]
ArmVirtPkg/ArmVirtPrePiUniCoreRelocatable: deal with relaxed XIP alignment
Commit b89919ee8f8c ("BaseTools AARCH64: override XIP module linker
alignment to 32 bytes") updated the various AARCH64 toolchain definitions
to allow SEC, PEI_CORE and PEIM modules to be built with minimal alignment
requirements even when using the AArch64 small code model which normally
requires 4 KB section alignment.
This involves conversion of ADRP instructions into ADR instructions, which
can only be done reliably if the ELF and the PE/COFF sections appear at
the same offset modulo 4 KB.
The ArmVirtPrePiUniCoreRelocatable linker script did not yet take this
into account, so update it by starting the .text section at the next
appropriately aligned offset PECOFF_HEADER_SIZE bytes into the image.
BaseTools: Keep the Pcd order in the Asbuilt Inf is same with Source
The original behavior is that in the Asbuilt inf Pcd's order is base on
the Pcd's offset. Now we change the order to keep it is same with the Pcd
order in the source inf file.
BaseTools AARCH64: override XIP module linker alignment to 32 bytes
Now that GenFw converts small code model ADRP instructions to ADR on
the fly, we can reduce the alignment for XIP modules, where large
alignment values may cause considerable waste of flash space due to
excessive padding. This limits the module size to 1 MB, but this is
not a concern in practice.
So set the XIP section alignment to 0x20 for DEBUG_GCC49, DEBUG_GCC5
and *_CLANG35, all of which use the small code model.
BaseTools/GenFw AARCH64: convert ADRP to ADR instructions if binary size allows it
The ADRP instruction in the AArch64 ISA requires the link time and load time
offsets of a binary to be equal modulo 4 KB. The reason is that this instruction
always produces a multiple of 4 KB, and relies on a subsequent ADD or LDR
instruction to set the offset into the page. The resulting symbol reference
only produces the correct value if the symbol in question resides at that
exact offset into the page, and so loading the binary at arbitrary offsets
is not possible.
Due to the various levels of padding when packing FVs into FVs into FDs, this
alignment is very costly for XIP code, and so we would like to relax this
alignment requirement if possible.
Given that symbols that are sufficiently close (within 1 MB) of the reference
can also be reached using an ADR instruction which does not suffer from this
alignment issue, let's replace ADRP instructions with ADR after linking if
the offset can be encoded in this instruction's immediate field. Note that
this only makes sense if the section alignment is < 4 KB. Otherwise,
replacing the ADRP has no benefit, considering that the subsequent ADD or
LDR instruction is retained, and that micro-architectures are more likely
to be optimized for ADRP/ADD pairs (i.e., via micro op fusing) than for
ADR/ADD pairs, which are non-typical.
BaseTools GCC: introduce GCC5 toolchain to support GCC v5.x in LTO mode
This adds support for GCC 5.x in LTO mode for IA32, X64, ARM and
AARCH64. Due to the fact that the GCC project switched to a new
numbering scheme where the first digit is now incremented for every
major release, the new toolchain is simply called 'GCC5', and is
intended to support all GCC v5.x releases.
Since IA32 and X64 enable compiler optimizations (-Os) for both DEBUG
and RELEASE builds, LTO support is equally enabled for both targets.
On ARM and AARCH64, DEBUG builds are not optimized, and so the LTO
optimizations are only enabled for RELEASE.
BaseTools GCC: drop GNU notes section from EFI image
Recent versions of GNU ld automatically emit a .notes section into
the ELF binary containing a build id. Since this is an allocatable
section by default, it will be identified by GenFw as a section
that requires PE/COFF conversion, which may cause sections to be
moved around unexpectedly.
So retain the section, but tag it as INFO, which tells the linker
that it should not be accounted for in the binary's memory layout.
ArmPkg: add prebuilt glue binaries for GCC5 LTO support
GCC in LTO mode interoperates poorly with non-standard libraries that
provide implementations of compiler intrinsics such as memcpy/memset
or the stack protector entry points. Such libraries need to be built
in non-LTO mode, and then referenced explicitly on the linker command
line using a -plugin-opt=-pass-through=-lxxx linker option.
However, if these intrinsics are also referenced directly, the LTO
version of the code will be pulled in, and will happily satisfy all
other references to the same symbol.
So add a pair of glue libraries, for ARM and AARCH64, that reference
the known intrinsics. Since the binaries live under ArmPkg directly,
we can reference them in tools_def.txt. Under LD garbage collection,
the object itself will be pruned, and so will the intrinsics that end
up unused by the module.
BaseTools GCC: use 'gcc' as the linker command for GCC44 and later
To accommodate upcoming GCCx toolchain versions that require 'gcc' to
be used as the linker in order to support LTO, switch GCC44 and later
(including CLANG35) to a new DLINK build rule that invokes 'gcc' as the
linker instead of 'ld'. Since gcc expects its command line arguments in
a different format, and expects arguments that it needs to pass to the
linker to be prefixed with '-Wl,', this involves changes to most of the
DLINK_FLAGS definitions in tools_def.template, as well as some changes to
module .INF files that set their own linker options.
BaseTools UNIXGCC ELFGCC CYGGCC: clone GCC build rule family into GCCLD
Before we can make non-backward compatible changes to the GCC build rules
regarding the use of the 'gcc' binary as the linker, clone the existing
GCC build rules into a 'GCCLD' build rule family, and move the legacy
toolchains UNIXGCC, CYGGCC, CYGGCCxASL and ELFGCC over to it.
ArmVirtPkg/ArmVirtPrePiUniCoreRelocatable: ignore .hash and .note sections
Newer versions of ld automatically emit .gnu.hash and .note.gnu.build-id
sections, which are not listed in the linker script, and will end up
breaking the build with an allocation conflict, e.g.,
Since we don't require or care about these sections, update the linker
script so that they are discarded. Note that this involves emitting the
.note.gnu.build-id section into a non-allocatable segment to prevent the
linker from noticing that it is being discarded (and subsequently
complaining about it)
Ard Biesheuvel [Mon, 1 Aug 2016 06:48:02 +0000 (08:48 +0200)]
MdePkg: move to 'hidden' visibility for all symbols under GCC/X64
When using GCC to build for X64, we switched to the position independent
small code model, which is much more efficient in terms of code generation
and runtime relocation footprint, and produces binaries that can execute
correctly from any offset.
However, the PIC routines are by default geared towards hosted binaries
containing symbol references that may resolve to definitions in other
dynamic objects, and for this reason, most symbol references are indirected
via a GOT entry (which also results in a .reloc fixup entry) unless we
annotate them.
For this reason, we introduced the 'protected' visibility annotation for
all symbol definitions and references, by setting the GCC visibility
pragma. However, as it turns out, this is not sufficient for all versions
of GCC, and in some cases (GCC 5.x using the GCC49 toolchain tag), may
still result in GOT based relocations.
So switch to 'hidden' visibility instead, which is slightly stronger, and
fixes this issue for the versions of GCC that exhibit the problem.
MdeModulePkg LoadFileOnFv2: Add new LoadFileOnFv2 driver
This driver searches APPLICATION in FV and installs LoadFile protocol
for every found one. Then, BDS will add BootOption for LoadFile protocol.
It provides the generic way to expose boot option for the internal
application, such as Shell. With this driver, PlatformBds doesn?t need
to specially handle Shell application.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
BaseTools: Add build info for binary modules that only list in FDF file
If the binary module is list in the FDF file but not list in the DSC
file, current build report would not include these binary module's info
in the report "Module section". The patch fix this issue.
Ruiyu Ni [Fri, 29 Jul 2016 02:33:26 +0000 (10:33 +0800)]
ShellBinPkg: Ia32/X64 Shell binary update.
The binaries of ShellBinPkg are generated with ShellPkg project 031403460c9782a2563a81a6065ded99046960c2.
The binaries are built with no debug information by building with "RELEASE" target.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ruiyu Ni [Thu, 28 Jul 2016 04:46:25 +0000 (12:46 +0800)]
ShellPkg: Unregister hotkey callback when exiting Shell
Commit 9168df3dea65f707d1e9c32eba5e18ef6b84e5cd
"ShellPkg/ShellProtocol.c: Handle memory allocation failure"
only keeps the protocol clean up in CleanUpShellProtocol() and
creates a new function CleanUpShellEnvironment() which calls
CleanUpShellProtocol(), then unregisters the hotkey callback.
But the commit forgot to change the Shell.c to call
CleanUpShellEnvironment() which causes the hotkey callback is
not unregistered while the callback function doesn't exist
when Shell exits.
This causes system hang when pressing CTRL+C after exiting shell.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Thomas Palmer [Wed, 27 Jul 2016 06:48:15 +0000 (01:48 -0500)]
OvmfPkg/Sec: Support SECTION2 DXEFV types
Support down-stream projects that require large DXEFV sizes greater
than 16MB by handling SECTION2 common headers. These are already
created by the build tools when necessary.
Use IS_SECTION2 and SECTION2_SIZE macros to calculate accurate image
sizes when appropriate.
Ruiyu Ni [Tue, 26 Jul 2016 13:07:19 +0000 (21:07 +0800)]
PcAtChipsetPkg/PcRtc: Fix a NULL pointer deference issue
When a platform which doesn't support ACPI 1.0 (no XSDT) and FADT
is not produced at the first time when ACPI table is published,
GetCenturyRtcAddress() unconditionally deference Rsdp->RsdtAddress
but Rsdp->RsdtAddress is 0 in this case.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
BaseTools: report error if source module INF is only list in FDF file
If source module INF is not listed in DSC, it will not be built. And it
is listed in FDF, GenFds will fail to find its build output. To reminder
user this issue early, build tool should report failure to user in early
phase.
IntelFsp2Pkg: Skip loading Microcode if MicrocodeCodeSize is zero
During asm to Nasm conversion, we missed the code to skip loading the
microcode and return success if the size is zero. Added additional check to
report error if the microcode size is not zero but less than 2 kB.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
NetworkPkg UefiPxeBcDxe: Fix build error for lastest VS2015 compiler
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxeBcDxe.lib(PxeBcBoot.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 148 in file NetworkPkg\UefiPxeBcDxe\PxeBcBoot.c. The
third parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
NetworkPkg IScsiDxe: Fix build error for lastest VS2015 compiler
The IScsiDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
IScsiDxe.lib(IScsiProto.obj) : error LNK2001: unresolved external symbol
__allmul
The cause is line 141 in file NetworkPkg\IScsiDxe\IScsiProto.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
BaseTools/toolsetup: Do not set CONF_PATH when already set.
When CONF_PATH is already set, toolsetup.bat overwrites its value.
This is not the case on Linux platforms (BuildEnv) and
contra-productive when using the same Workspace across multiple
Operating Systems.
With this patch, a check is performed prior to setting the variable.
Furthermore, it will not be scanned for Conf directories in
PACKAGES_PATH directories to respect the user's choice.
Thomas Palmer [Fri, 22 Jul 2016 02:56:49 +0000 (10:56 +0800)]
Preserve hii section in GCC binaries
According to UEFI spec:
Once an image is loaded, LoadImage() installs
EFI_HII_PACKAGE_LIST_PROTOCOL on the handle if the image contains a
custom PE/COFF resource with the type 'HII'. The protocol's
interface pointer points to the HII package list which is contained
in the resource's data.
This is controlled by the UEFI_HII_RESOURCE_SECTION define in the INF
file. When present the HII resource is linked with the module
binary.
Unfortunately GCC-built binaries have been stripping the .hii section
entirely. See "[edk2] HII gEfiHiiPackageListProtocolGuid problem
with GCC48(VS2012x86 works)"
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/13438
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/14899
This patch tells the linker to preserve the .hii sections
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Bruce Cran <bruce.cran@gmail.com> Reviewed-by: Bruce Cran <bruce.cran@gmail.com> Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Update edksetup.bat to check NASM system environment variable
If the NASM_PREFIX variable is not set, it would report warning message.
If there exist the C:\nasm\nasm.exe file, it would set the NASM_PREFIX
variable to C:\nasm\.
Cc: Andrew Fish <afish@apple.com> Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Andrew Fish <afish@apple.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Ruiyu Ni [Mon, 25 Jul 2016 02:48:43 +0000 (10:48 +0800)]
ShellBinPkg: Ia32/X64 Shell binary update.
The binaries of ShellBinPkg are generated with ShellPkg project fc41b97f128a0c7f28a9cc250e629a0ad2262ac8.
The binaries are built with no debug information by building with "RELEASE" target.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ruiyu Ni [Fri, 22 Jul 2016 02:14:05 +0000 (10:14 +0800)]
ShellPkg/LoadPciRom: Fix the ConnectAll() implementation
Old implementation depends on UefiHandleParsingLib and uses
incorrect Index to get handle type.
The simplest ConnectAll() implementation can be just to
locate all handles and call BS.ConnectController() for each
of them recursively. BS.ConnectController() does nothing
to the image handle. Such implementation is borrowed from
BDS core implementation.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
MdeModulePkg/UsbBus: reduce the port status polling before port reset
This change is used to remove the port status polling in port reset
functions.
Why it's needed is because:
1) The same polling on same port has taken place prior to this removed
one. See UsbEnumeratePort()->GetPortStatus(). So this polling in
UsbEnumerateNewDev()->ResetPort() is redundant.
2) EDKII Xhci driver hooks all GetPortStatus() operations. If we don't
remove this one, XHCI driver's XhcPollPortStatusChange() may enter twice
in reset process and wrongly think the device is unplugged.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
MdeModulePkg/UsbBus: remove redundant host controller reset in UsbBus
The Host Controller reset has been done at EDKII UHCI/EHCI/XHCI, The
original code will do twice host controller initialization which is
unnecessary. It also bring issues on some USB HCs.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
IntelFsp2Pkg: Remove CarBase and CarSize from FSP_GLOBAL_DATA
CarBase and CarSize in Fsp Global data structure are no longer needed as
Boot loader doesn't pass them to FSP even in case that BL chooses to skip calling
the FspTempRamInit API. In case of FspTempramInit is called, we can use the PCDs
to identify the CarBase and Size. Hence we remove the relevant code.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Michael Chang [Thu, 21 Jul 2016 01:58:44 +0000 (09:58 +0800)]
Fix IPv6 HTTPClient vendor class data
The size of the ClassIdentifier is apparently wrong in the structure. In my
testing it caused the vendor class data to be displayed as bogus
"HTTPClient:Arch00016x:UNDI00300". After correcting the size the vendor class
data is "HTTPClient:Arch00016:UNDI003000" which looks good to me.
SecurityPkg: AuthVariableLib: Revert UserPhysicalPresent feature from AuthVariableLib
Physical Presence state reporting is constrained by physical presence caching in variable driver. For example, reporting must be prior to Physical Presence caching. Physical Presence state becomes constant rather than instant after caching. Therefore, PlatformSecureLib is responsible for reporting Physical Presence state in expected way.
BaseTools/tools_def: switch GCC/X64 to the PIE small model
The ordinary small code model for x86_64 cannot be used in UEFI, since
it assumes the executable is loaded in the first 2 GB of memory.
Therefore, we use the large model instead, which can execute anywhere,
but uses absolute 64-bit wide quantities for all symbol references,
which is costly in terms of code size.
So switch to the PIE small code model, this uses 32-bit relative
references where possible, but does not make any assumptions about the
load address (i.e., all absolute symbol references are 64-bits wide).
Note that, due to the 'protected' visibility pragma introduced in an
earlier patch, there is no need for the EDK2 build system to deal with
GOT related ELF relocation types.
MdePkg X64: force 'protected' visibility when building with -fpic
When building position independent (PIC) ELF objects, the GCC compiler
assumes that each symbol with external linkage may potentially end up
being exported from a shared library, which means that each of those
symbols may be subject to symbol preemption, i.e., the executable
linking to the shared library at runtime may override symbols exported
by the shared library, and every internal reference held by the shared
library itself *must* be made to point to the overridden version instead.
For this reason, PIC code symbol references always go via the Global
Offset Table (GOT), even if the code in question references symbols that
are defined in the same compilation unit. The GOT refers to each symbol
by absolute address, and so each entry is subject to runtime relocation.
Since not every symbol with external linkage is ultimately exported from
a shared library, the GCC compiler allows control over symbol visibility
using attributes, command line arguments and pragmas, where 'protected'
means that the symbol is only referenced by the shared library itself.
Due to the poor hygiene in EDK2 regarding the use of the 'static'
modifier, many symbols that are local to their compilation unit end up
being referenced indirectly via the GOT when building PIC code.
In UEFI, there are no shared libraries and so there is no need to deal
with symbol preemption, and we can mark every symbol reference protected.
The only method that applies to all symbol definitions as well as
declarations is the #pragma. So set the visibility 'protected' pragma when
building PIC code for X64 using GCC. Note that this affects code generated
with the -fpie compiler switch as well as the -fpic compiler switch.
BaseTools/tools_def: enable Os optimization for GCC X64 builds
Now that we switched to the __builtin_ms_va_list VA_LIST type for
GCC/X64, we can trust the compiler to do the right thing even under
optimization, and so we can enable -Os optimization all the way back
to GCC44, and drop the -D define that prevents the use of the __builtin
VA_LIST types. Note that this requires the -maccumulate-outgoing-args
switch as well.