]>
git.proxmox.com Git - pve-docs.git/log
Thomas Lamprecht [Wed, 14 Nov 2018 07:08:01 +0000 (08:08 +0100)]
README: note level 4 heading issues
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 14 Nov 2018 07:04:51 +0000 (08:04 +0100)]
qm pci passthrough: follow up enhancements
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Tue, 13 Nov 2018 14:18:14 +0000 (15:18 +0100)]
add documentation for mediated devices
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Tue, 13 Nov 2018 14:18:13 +0000 (15:18 +0100)]
qm: remove 4th level heading and fix typos
manpages cannot have a 4th section, replace them with
titles
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
David Limbeck [Tue, 13 Nov 2018 12:48:27 +0000 (13:48 +0100)]
fix #1975: extend 'My Settings' documentation
add a section for 'My Settings' documenting Dashboard Storages, clear
user name, reset layout and xterm.js settings
Signed-off-by: David Limbeck <d.limbeck@proxmox.com>
Thomas Lamprecht [Tue, 13 Nov 2018 12:30:47 +0000 (13:30 +0100)]
pvecm: note about PVE 4.X and 5.X cluster compatibility
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 13 Nov 2018 12:25:08 +0000 (13:25 +0100)]
followup #1850: pvecm: referencing all nodes in etc/hosts is not necessarry
...for a cluster to work, as we can corosync can use multicast to
from the totem ring and we then can use that to communicate the other
nodes cluster IP.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 13 Nov 2018 12:22:09 +0000 (13:22 +0100)]
pvecm: mark all console commands the same way
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 13 Nov 2018 12:04:36 +0000 (13:04 +0100)]
#1850 followup: pvecm: you can use SSH or API to create cluster
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
David Limbeck [Thu, 25 Oct 2018 09:32:47 +0000 (11:32 +0200)]
fix #1959: remove any information regarding 'auto'
Remove any information regarding 'auto' but mention the netplan workaround for SLAAC
Signed-off-by: David Limbeck <d.limbeck@proxmox.com>
Thomas Lamprecht [Tue, 13 Nov 2018 08:24:41 +0000 (09:24 +0100)]
followup: typos, formatting and wording improvements
fix some typos like s/seperate/separate/ passhtrough, ...
Reword some sentences, try to reduces commas per sentence (while I
like them, others don't and they entangle your mind when reading a
bit).
Try to improve formatting, adding some emphasis on abbrevations or
other important things. Ensur all abbrev. are writen uppercase.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Mon, 12 Nov 2018 15:00:46 +0000 (16:00 +0100)]
add documentation for pci passthrough and sr-iov
explain what it is and how to use it, especially the steps necessary
on the host and the various options under one chapter
most of this is also found on the wiki in the Pci_passthrough
article
we may want to condense the information there and link it as
'notes and examples'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Mon, 12 Nov 2018 13:37:27 +0000 (14:37 +0100)]
qemu: fix typo s/vmgedid/vmgenid/
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Mon, 12 Nov 2018 13:36:35 +0000 (14:36 +0100)]
qm: display: enahnce and add cirrus description
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Mon, 12 Nov 2018 10:14:44 +0000 (11:14 +0100)]
add documentation for display types and memory configuration
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Nick Chevsky [Sat, 10 Nov 2018 07:05:23 +0000 (02:05 -0500)]
Document new SSD emulation feature
This change documents the recently added SSD emulation feature for
IDE, SATA, and SCSI drives, which consists of:
* an `ssd` qm.conf flag [1], and
* an "SSD emulation" drive option in pve-manager. [2]
[1] https://git.proxmox.com/?p=qemu-server.git;a=commit;h=
6c875f9f315f2dc7a0a3a988622c2efdf089b171
[2] https://git.proxmox.com/?p=pve-manager.git;a=commit;h=
6e40f7b0347e4275f6bcc7a484f930d4345d1c8e
Signed-off-by: Nick Chevsky <nchevsky@gmail.com>
Thomas Lamprecht [Tue, 23 Oct 2018 11:03:06 +0000 (13:03 +0200)]
bump version to 5.2-9
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 23 Oct 2018 10:57:54 +0000 (12:57 +0200)]
make update-static
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fabian Grünbichler [Wed, 17 Oct 2018 11:02:00 +0000 (13:02 +0200)]
d/control: minimize pve-doc-generator depends
we don't actually need the whole dblatex/texlive dependency chain to
generate man pages.
this reduces the current dependency chain of pve-doc-generator in a
minimal chroot from 184 packages (556mb) to 72 packages (90mb):
-asciidoc-dblatex
-dblatex
-dirmngr
-docbook-dsssl
-docbook-utils
-fontconfig-config
-fonts-dejavu-core
-fonts-lmodern
-gnupg
-gnupg-agent
-jadetex
-libassuan0
-libavahi-client3
-libavahi-common-data
-libavahi-common3
-libbsd0
-libcairo2
-libcups2
-libcupsimage2
-libfontconfig1
-libfreetype6
-libglib2.0-0
-libgnutls30
-libgraphite2-3
-libgs9
-libgs9-common
-libgssapi-krb5-2
-libharfbuzz-icu0
-libharfbuzz0b
-libhogweed4
-libice6
-libidn11
-libijs-0.35
-libjbig0
-libjbig2dec0
-libjpeg62-turbo
-libk5crypto3
-libkeyutils1
-libkpathsea6
-libkrb5-3
-libkrb5support0
-libksba8
-liblcms2-2
-libldap-2.4-2
-libldap-common
-libnettle6
-libnpth0
-libnspr4
-libnss3
-libopenjp2-7
-libosp5
-libostyle1c2
-libp11-kit0
-libpaper-utils
-libpaper1
-libpixman-1-0
-libpng16-16
-libpoppler64
-libpotrace0
-libptexenc1
-libsasl2-2
-libsasl2-modules-db
-libsgmls-perl
-libsm6
-libsynctex1
-libtasn1-6
-libtexlua52
-libtexluajit2
-libtiff5
-libx11-6
-libx11-data
-libxau6
-libxaw7
-libxcb-render0
-libxcb-shm0
-libxcb1
-libxdmcp6
-libxext6
-libxi6
-libxmu6
-libxpm4
-libxrender1
-libxt6
-libzzip-0-13
-lynx
-lynx-common
-openjade
-opensp
-pinentry-curses
-poppler-data
-preview-latex-style
-python-apt
-python-apt-common
-sgmlspl
-t1utils
-tex-common
-texlive
-texlive-base
-texlive-bibtex-extra
-texlive-binaries
-texlive-extra-utils
-texlive-fonts-recommended
-texlive-generic-recommended
-texlive-htmlxml
-texlive-latex-base
-texlive-latex-extra
-texlive-latex-recommended
-texlive-pictures
-texlive-science
-ucf
-x11-common
-xdg-utils
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 17 Oct 2018 11:01:59 +0000 (13:01 +0200)]
pve-doc-generator: add rules for API verification
since API verification happens in the same places as man page and bash
completion generation, and is identical across the board.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 17 Oct 2018 11:01:58 +0000 (13:01 +0200)]
pve-doc-generator: add rules for bash-completion
while these are not strictly documentation, they use the same mechanisms
and are generated at the same time as the man pages.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 17 Oct 2018 11:01:57 +0000 (13:01 +0200)]
pve-doc-generator: make include dirs configurable
by setting PERL_DOC_INC_DIRS before including pve-doc-generator.mk
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Rhonda D'Vine [Mon, 15 Oct 2018 13:01:08 +0000 (15:01 +0200)]
Adjust example cipher string in doc for default
Even though this is meant as an example, it makes sense to keep it in
sync with what the actual default is.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
Wolfgang Bumiller [Mon, 1 Oct 2018 08:41:37 +0000 (10:41 +0200)]
minor cleanups, typo and whitespace fixes
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Alexandre Derumier [Tue, 4 Sep 2018 10:53:57 +0000 (12:53 +0200)]
improve spectre/meltdown cpu flags documentation
-add new cpuflags for spectre v4.
-split cpuflags between amd && intel processors
Alexandre Derumier [Wed, 26 Sep 2018 15:16:33 +0000 (17:16 +0200)]
firewall doc : remove wrong note
Documentation said that vm need to be restart after enable/disable
firewall option on interface.
This is wrong, the fwbr is added/removed online, and tap are
unplug/plug to fwbr online too
Thomas Lamprecht [Fri, 21 Sep 2018 14:14:30 +0000 (16:14 +0200)]
qm: vmgenid: add note for initial addition on existing VMs
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Fri, 21 Sep 2018 14:08:27 +0000 (16:08 +0200)]
qm: vmgenid: fix spacing and reword,
also pass links as footnote, link to a conmon guid generator, ...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Wed, 19 Sep 2018 09:35:12 +0000 (11:35 +0200)]
qm: add vmgenid documentation
explain how to use it, what it is and a link to further documentation
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dietmar Maurer [Thu, 13 Sep 2018 09:43:12 +0000 (11:43 +0200)]
api-viewer: correctly escape html when displaying return types.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Thomas Lamprecht [Thu, 13 Sep 2018 07:40:55 +0000 (09:40 +0200)]
buildsys: allow missing pve-doc-generator.mk on build/clean
Avoids the following warning when running initial building or
running make clean (initially, or twice):
> Makefile:38: pve-doc-generator.mk: No such file or directory
As we can do without this, simply tell make to ignore it if missing.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Wed, 12 Sep 2018 12:20:29 +0000 (14:20 +0200)]
use https for the website
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Wed, 12 Sep 2018 12:20:28 +0000 (14:20 +0200)]
change pricing link to en
since the language on proxmox.com depends on the cookie,
using no language in the url leads to a 404 if the
cookie says 'german', so always link to the english site
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:58 +0000 (19:41 +0200)]
d/compat: bump to 10
(enables parallel builds by default)
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:57 +0000 (19:41 +0200)]
build: fix broken parallel builds
a2x only supports destination folders for HTML based variants, but fortunately
that is enough in our case without needing extra workarounds.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:56 +0000 (19:41 +0200)]
d/control: add missing build-dependencies
gathered by building in a minimal Debian Stretch chroot with just the
listed build-dependencies installed.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:55 +0000 (19:41 +0200)]
d/control: bump debhelper build-dependency
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:54 +0000 (19:41 +0200)]
build: wrap-and-sort debian/
for consistency and easier diffing
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fabian Grünbichler [Wed, 12 Sep 2018 17:41:53 +0000 (19:41 +0200)]
build: refactor build process
build packages in one go by moving individual .deb targets into install
targets called by dpkg-buildpackage.
all three binary packages are bootstrappable on a straight Debian host,
so there is no need to call dpkg-buildpackage separately for each of
them.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Alexandre Derumier [Tue, 11 Sep 2018 07:03:52 +0000 (09:03 +0200)]
remove note about vlan management interface
This seem wrong,
it's possible to setup management vlan interface
on vlanaware bridge without conflict with vm.
(If vlan management is setup with vmbrX.Y)
Alexandre Derumier [Tue, 11 Sep 2018 07:03:51 +0000 (09:03 +0200)]
add vlanaware bridge management vlan configuration
Dietmar Maurer [Wed, 5 Sep 2018 06:41:03 +0000 (08:41 +0200)]
used proxmox CI colors for network graphics
Alexandre Derumier [Wed, 22 Aug 2018 06:33:16 +0000 (08:33 +0200)]
vxlan: increase mtu to 1550
vxlan encapsulation have 50 bytes overhead,so we need to increase
mtu on physical interfaces to avoid fragmentation.
Alexandre Derumier [Wed, 22 Aug 2018 06:33:15 +0000 (08:33 +0200)]
vrf : remove net.ipv4.tcp_l3mdev_accept=1 sysctl tuning
kernel has been patched
https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=
49b6d16422120bf40204c40729c17a72e177e690
David Limbeck [Thu, 23 Aug 2018 11:48:43 +0000 (13:48 +0200)]
fix typos/wording
Signed-off-by: David Limbeck <d.limbeck@proxmox.com>
Dietmar Maurer [Fri, 17 Aug 2018 10:25:22 +0000 (12:25 +0200)]
pve-patch-process.tt: another graphviz example graph
Not used currently.
Dietmar Maurer [Fri, 17 Aug 2018 07:09:46 +0000 (09:09 +0200)]
remove nwdiag related things
We do not use those graphics.
Dietmar Maurer [Fri, 17 Aug 2018 07:00:17 +0000 (09:00 +0200)]
pve-software-stack.tt: cleanup - set global fontname
Dietmar Maurer [Fri, 17 Aug 2018 06:54:30 +0000 (08:54 +0200)]
pve-software-stack.tt: add AppArmor and cgroups
Dietmar Maurer [Fri, 17 Aug 2018 06:42:54 +0000 (08:42 +0200)]
pve-software-stack.tt: s/Daemons/Services/
Dietmar Maurer [Thu, 16 Aug 2018 10:47:24 +0000 (12:47 +0200)]
use graphviz to generate pve-software-stack.svg
Produces much smaller .svg file
Dietmar Maurer [Thu, 16 Aug 2018 08:14:19 +0000 (10:14 +0200)]
add generated svg images
Dietmar Maurer [Thu, 16 Aug 2018 08:10:08 +0000 (10:10 +0200)]
install and use new network diagrams
Dietmar Maurer [Thu, 16 Aug 2018 07:31:05 +0000 (09:31 +0200)]
thumbnail: allow to reference all images inside /images subdir
Before, we was limited to /images/screenshots/
Dietmar Maurer [Tue, 14 Aug 2018 12:39:49 +0000 (14:39 +0200)]
add graphviz picture for our default bonded network setup
Dietmar Maurer [Mon, 13 Aug 2018 11:56:04 +0000 (13:56 +0200)]
add graphviz picture for our default routed network setup
Dietmar Maurer [Mon, 13 Aug 2018 11:55:17 +0000 (13:55 +0200)]
pve_network_templates.tt: add macro for ethernet interfaces
Dietmar Maurer [Mon, 13 Aug 2018 11:08:30 +0000 (13:08 +0200)]
add graphviz picture for our default bridged network setup
Dietmar Maurer [Mon, 13 Aug 2018 08:45:25 +0000 (10:45 +0200)]
add framework to generate network graphs using graphviz
Alexandre Derumier [Mon, 13 Aug 2018 09:11:39 +0000 (11:11 +0200)]
vxlan-evpn : add documentation to external routing
without bgp between proxmox and external router
Alexandre Derumier [Mon, 13 Aug 2018 09:11:38 +0000 (11:11 +0200)]
split sysctl.conf to symmetric and asymmetric setup
Alexandre Derumier [Mon, 13 Aug 2018 09:11:37 +0000 (11:11 +0200)]
vxlan : remove vlanaware bridge documentation
David Limbeck [Mon, 13 Aug 2018 13:06:17 +0000 (15:06 +0200)]
fix #1850: small additions
Alexandre Derumier [Fri, 10 Aug 2018 08:39:14 +0000 (10:39 +0200)]
add vxlan l3 routing
This add documentation for inter vxlan routing, with frr and anycast gateway.
Dietmar Maurer [Thu, 9 Aug 2018 05:56:27 +0000 (07:56 +0200)]
add documentation for vxlan layer 2 network
Thank to Alexandre Derumier <aderumier@odiso.com> for providing these docs.
Dietmar Maurer [Wed, 8 Aug 2018 06:52:32 +0000 (08:52 +0200)]
bump version to 5.2-8
Dominik Csapak [Tue, 7 Aug 2018 14:51:07 +0000 (16:51 +0200)]
add lvm/zfs anchors
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Tue, 31 Jul 2018 09:18:32 +0000 (11:18 +0200)]
follow up: fix preformatted-block syntax and newlines
four '-' are enough, common use and as they need to be symmetric also
easier to handle manually.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 31 Jul 2018 09:17:07 +0000 (11:17 +0200)]
follow up: use higher heading level
else this is not visible in the one-page html document
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Stoiko Ivanov [Tue, 31 Jul 2018 08:45:02 +0000 (10:45 +0200)]
certificate-managment.adoc: describe dir change
Adds a section with example of how to change the default ACME account from the
LE staging to production directory.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Dietmar Maurer [Fri, 27 Jul 2018 09:57:10 +0000 (11:57 +0200)]
bump version to 5.2-7
Dietmar Maurer [Fri, 27 Jul 2018 09:54:55 +0000 (11:54 +0200)]
gen-output-format-opts.pl: use correct argument syntax
Dietmar Maurer [Fri, 27 Jul 2018 09:50:15 +0000 (11:50 +0200)]
output-format.adoc: fix typo
Dietmar Maurer [Fri, 27 Jul 2018 08:50:25 +0000 (10:50 +0200)]
bump version to 5.2-6
Dietmar Maurer [Fri, 27 Jul 2018 08:41:49 +0000 (10:41 +0200)]
Makefile GEN_SCRIPTS: add gen-output-format-opts.pl
Dietmar Maurer [Fri, 27 Jul 2018 08:21:57 +0000 (10:21 +0200)]
pve-admin-guide: include pvenode and pvesh docs
Dietmar Maurer [Fri, 27 Jul 2018 07:57:51 +0000 (09:57 +0200)]
pvenode.adoc: include output-format.adoc
Dietmar Maurer [Fri, 27 Jul 2018 07:55:49 +0000 (09:55 +0200)]
pvesh.adoc: include output-format.adoc
Dietmar Maurer [Fri, 27 Jul 2018 07:54:44 +0000 (09:54 +0200)]
output-format.adoc: documentation for output format options
Dietmar Maurer [Fri, 27 Jul 2018 05:54:29 +0000 (07:54 +0200)]
pvesh.1-synopsis.adoc: update
Dietmar Maurer [Thu, 26 Jul 2018 13:19:32 +0000 (15:19 +0200)]
update pvenode.1-synopsis.adoc
Dietmar Maurer [Thu, 26 Jul 2018 13:18:45 +0000 (15:18 +0200)]
add pvesh.adoc
Thomas Lamprecht [Wed, 25 Jul 2018 09:21:33 +0000 (11:21 +0200)]
api-viewer: use our extjs package
The loading of an external hosted ExtJS is from a time where we did
not have a extra ExtJS package as it still was in the pve-manager
one, which was not desired to be installed on a non-pve machine.
Add a dependency on libjs-extjs and a link from api-viewer/extjs to
the installation directory of the ExtJS package, this allows to reuse
ExtJS on PVE node hosted docs and on the hosted docs from proxmox.com
at the same time.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 25 Jul 2018 09:21:32 +0000 (11:21 +0200)]
api-viewer: use 'normal' over 'touch' theme
The touch feels super zoomed, and the api-viewer is probably much
more viewed through a desktop/laptop not a mobile device with small
high-dpi touch screen.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 25 Jul 2018 09:21:30 +0000 (11:21 +0200)]
api-viewer: use much smaller minified extjs
Use the over 4 times smaller minfied version of ExtJS, not the debug
one.
Any developer can easily use the debug version if needed, but most of
the times it this isn't the case.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 10 Jul 2018 10:07:54 +0000 (12:07 +0200)]
bump version to 5.2-5
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 10 Jul 2018 09:42:56 +0000 (11:42 +0200)]
wiki: add CephFS link to storage page
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 10 Jul 2018 09:35:10 +0000 (11:35 +0200)]
update static files
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Fri, 6 Jul 2018 11:30:33 +0000 (13:30 +0200)]
add references to storage docs
so that they can be easily referenced, by the WebUI for example
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Fri, 6 Jul 2018 10:09:38 +0000 (12:09 +0200)]
storage: iscsi: don't use links in headers
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Fri, 6 Jul 2018 07:18:37 +0000 (09:18 +0200)]
pveceph: followup: fix grammar
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 5 Jul 2018 16:22:22 +0000 (18:22 +0200)]
pveceph: reword RAID paragraph
The "While ..." sentence seemed unfinished, reword paragraph
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 5 Jul 2018 16:18:03 +0000 (18:18 +0200)]
pveceph: followup: refactor advantage list
remove duplicated 'Easy management' point.
Remove 'no signle point of failure' as it's very easy to setup a
ceph cluster with lot's of single point of failures, ceph allows to
avoid them, but does not magically do so - so do not lull an unknown
user into false hope.
Use {pve} makro and rewor heading to a more "what's cool on ceph
_with_ pve" one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Alwin Antreich [Tue, 26 Jun 2018 15:17:09 +0000 (17:17 +0200)]
Update pveceph
* Combine sections from the wiki
* add section for avoiding RAID controllers
* correct command line for bluestore DB device creation
* minor rewording
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Thomas Lamprecht [Thu, 5 Jul 2018 15:09:55 +0000 (17:09 +0200)]
cephfs: reduce duplication of RBD docs and reword
No point in having half of RBD section duplicated here.
Reference pveceph-chapter, note that upstream considers snapshots
still not completely stable and remind user that he needs to setup a
ceph user secret...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Alwin Antreich [Mon, 25 Jun 2018 16:51:09 +0000 (18:51 +0200)]
Add storage plugin CephFS to docs
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Wolfgang Bumiller [Wed, 20 Jun 2018 07:50:00 +0000 (09:50 +0200)]
fix #1818: use NTP instead of Servers in timesyncd.conf
'Servers' should still work but it was changed to 'NTP'
quite a while ago...
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Thomas Lamprecht [Mon, 28 May 2018 13:38:37 +0000 (15:38 +0200)]
faq: add upgrade point
add a short FAQ point regarding upgrades (minor and major), with
anchor so that we can link better to it, e.g., from a EOL notice.
Dietmar Maurer [Fri, 18 May 2018 08:56:13 +0000 (10:56 +0200)]
use new helper PVE::RESTHandler::api_dump_remove_refs()
Dietmar Maurer [Wed, 16 May 2018 11:11:55 +0000 (13:11 +0200)]
bump version to 5.2-4