Fix this by accessing the array elements individually.
Cc: Liming Gao <liming.gao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1007.txt Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
MdePkg/PiFirmwareFile: express IS_SECTION2 in terms of SECTION_SIZE
The IS_SECTION2() function-like macro duplicates the SECTION_SIZE()
calculation, just to compare the computed size against 0xFFFFFF. Invoke
SECTION_SIZE() instead; only preserve the comparison.
CryptoPkg: add issetugid declaration to fix openssl build on FreeBSD
When building OpenSSL, the OpenBSD/FreeBSD/DFBSD code in crypto/uid.c
calls issetugid(). Add the declaration of this function to
CrtLibSupport.h to avoid the need to patch the openssl code on these
platforms.
Signed-off-by: Rebecca Cran <rebecca@bluestop.org> Reviewed-by: Jian Wang <jian.j.wang@intel.com>
This commit will add the PEI BlockIO (2) PPIs support for AHCI mode ATA
devices.
More specifically, the driver will consume the ATA AHCI host controller
PPI for ATA controllers working under AHCI code within the system. And
then produces the below additional PPIs for each controller:
EFI PEI Recovery Block IO PPI
EFI PEI Recovery Block IO2 PPI
Cc: Eric Dong <eric.dong@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Due to the limited resource on the VTd DMA buffer size in the PEI phase,
the driver will limit the maximum transfer block number for 48-bit
addressing.
According to PCDs:
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSize|0x00400000
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000
The default buffer size allocated for IOMMU mapping is:
* 4M bytes for non-S3 cases;
* 2M bytes for S3
For ATA devices in 48-bit address mode, the maximum block number is
currently set to 0xFFFF. For a device with block size equal to 512 bytes,
the maximum buffer allowed for mapping within AhciPei driver will be close
to 32M bytes. Thus, this commit will limit the 48-bit mode maximum block
number to 0x800, which means 1M-byte maximum buffer for mapping when the
block size of a device is 512 bytes. By doing so, potential failure on
calls to the IOMMU 'Map' service can be avoided.
Cc: Eric Dong <eric.dong@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Remove ShellBinPkg from edk2.
If developers work on current edk2 master and still want to use Shell
binary after this removal, they can get it from source code in the Assets
part of edk2-stable201903 tag release page.
And from next release (edk2-stable201905 tag), we will publish all Shell
binaries to the according Assets part directly. link: https://github.com/tianocore/edk2/releases Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Liming Gao <liming.gao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Dandan Bi <dandan.bi@intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
(cherry picked from commit 62d8b6004616a6d9b06afa83974be30eb951c679)
Commit ffe5f7a6b4e9
"MdeModulePkg/HiiDatabase: Fix potential integer overflow "
added some new error paths, but it missed releasing the
mHiiDatabaseLock lock on those paths.
This patch releases mHiiDatabaseLock on those paths.
Cc: Hao Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 927c516f9557f2f36319fe5d2508af29e3375fb8)
MdeModulePkg/DxeCapsuleLibFmp: clone ESRT for runtime access
The DxeCapsuleLibFmp code accesses the ESRT table to decide whether
a certain capsule is an FMP capsule. Since the UEFI spec mandates
that the ESRT resides in EfiBootServicesData memory, this results
in problems at OS runtime, since the firmware implementation itself
cannot access memory that has not been virtually remapped.
So let's take a private copy of the ESRT at ReadyToBoot, and store
it in EfiRuntimeServicesData memory. The ESRT's size is order 10s
of bytes so the memory footprint is going to be negligigble.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
On some build environment, build fails but on the other build machines,
build success. This is the regression issue introduced by commit 05217d210e8da37b47d0be58ec363f7af2fa1c18
As Dict is unordered, an error occurs when extract the index of the Dict
in the order of the keys after the creation of a new item.
Keys are indexed inconsistently before and after adding a new item.
The logic of the program is to store the key's corresponding index as
reference data in the MakeFile and use it as part of the macro.
The data model is: $(LIST_%d) % Dict.keys().index(Key)
So for now, use OrdereDict instead of Dict.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2: Added the platform name to the path
Add more level sub-directories in the database to support save
the cache for multiple platforms with multiple tool-chains and
targets, just like edk2 Build output.
Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Yonghong Zhu <yonghong.zhu@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
On Windows OS, sometime the generated file is not immediate saved to disk.
When run nmake, prompt AutoGen.h not found, and stop build.
Below blog shows Write-Replace to fix it. This patch uses this way to write
temp file, then rename the temp file to the real file.
https://blog.gocept.com/2013/07/15/reliable-file-updates-with-python/
After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gST. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gST to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gST. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gST to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gBS. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gBS to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Setup need provide an item for user to control IPV46 PXE boot.
Origin UefiPxeBcDxe driver doesn't have such interface.
This change added two PCD to control IPV4/6 PXE in PxeBcSupported().
Platform code should override this two PCD according to Setup value.
code change no side effect on current PXE function with default PCD.
Signed-off-by: Xue ShengfengX <shengfengx.xue@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The warning is invalid: the flagged dereferencing of "InstanceZero" is
gated by a condition that is only satisfied if we dereference
"InstanceZero" *first*.
(Perhaps the analyzer assumes that the OrderedCollectionInsert() call,
just before line 259, can change the value of "PciCap->Key.Instance" via
the last argument:
254 //
255 // Add PciCap to CapList.
256 //
257 Status = OrderedCollectionInsert (CapList->Capabilities, &PciCapEntry,
258 PciCap);
259 if (RETURN_ERROR (Status)) {
OvmfPkg/AcpiPlatformDxe: catch theoretical nullptr deref in Xen code
RH covscan justifiedly reports a path through InstallXenTables() where
DsdtTable can technically remain NULL.
If this occurs in practice, then the guest and the VMM are out of sync on
the interface contract. Catch the situation with a code snippet that halts
in RELEASE builds, and in DEBUG builds lets the platform DSC control the
assert disposition first (i.e. CPU exception, deadloop, or nothing).
> Error: CLANG_WARNING:
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:309:14: warning: Access
> to field 'Length' results in a dereference of a null pointer (loaded
> from variable 'DsdtTable')
> # DsdtTable->Length,
> # ^~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:154:3: note: Null
> pointer value stored to 'DsdtTable'
> # DsdtTable = NULL;
> # ^~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:162:3: note: Taking
> false branch
> # if (EFI_ERROR (Status)) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:170:7: note: Assuming
> the condition is false
> # if (XenAcpiRsdpStructurePtr->XsdtAddress) {
> # ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:170:3: note: Taking
> false branch
> # if (XenAcpiRsdpStructurePtr->XsdtAddress) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:220:12: note: Assuming
> the condition is false
> # else if (XenAcpiRsdpStructurePtr->RsdtAddress) {
> # ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:220:8: note: Taking
> false branch
> # else if (XenAcpiRsdpStructurePtr->RsdtAddress) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:274:3: note: Taking
> false branch
> # if (Fadt2Table) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:288:8: note: Taking
> false branch
> # else if (Fadt1Table) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:309:14: note: Access to
> field 'Length' results in a dereference of a null pointer (loaded from
> variable 'DsdtTable')
> # DsdtTable->Length,
> # ^~~~~~~~~
> # 307| AcpiProtocol,
> # 308| DsdtTable,
> # 309|-> DsdtTable->Length,
> # 310| &TableHandle
> # 311| );
OvmfPkg/AcpiPlatformDxe: suppress invalid "deref of undef pointer" warning
RH covscan emits the following false positive:
> Error: CLANG_WARNING:
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:182:14:
> warning: Dereference of undefined pointer value
> # Status = FwVol->ReadSection (
> # ^~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:164:7: note:
> Assuming the condition is false
> # if (QemuDetected ()) {
> # ^~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:164:3: note:
> Taking false branch
> # if (QemuDetected ()) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:174:3: note:
> Taking false branch
> # if (EFI_ERROR (Status)) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:180:10: note:
> Assuming 'Status' is equal to EFI_SUCCESS
> # while (Status == EFI_SUCCESS) {
> # ^~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:180:3: note:
> Loop condition is true. Entering loop body
> # while (Status == EFI_SUCCESS) {
> # ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:182:14: note:
> Dereference of undefined pointer value
> # Status = FwVol->ReadSection (
> # ^~~~~~~~~~~~~~~~~~
> # 180| while (Status == EFI_SUCCESS) {
> # 181|
> # 182|-> Status = FwVol->ReadSection (
> # 183| FwVol,
> # 184| (EFI_GUID*)PcdGetPtr (PcdAcpiTableStorageFile),
This is invalid because LocateFvInstanceWithTables() sets FwVol on
success.
Suppress the message by:
- assigning FwVol NULL first (this would replace the original report with
"nullptr deref"),
- asserting that FwVol is no longer NULL, on success.
What's important here is that ASSERT() ends with ANALYZER_UNREACHABLE() on
failure.
OvmfPkg/QemuVideoDxe: avoid arithmetic on null pointer
The real mode interrupt vector table, which we modify for the sake of
Windows 7, starts at address 0, which happens to be the representation of
null pointers on all edk2 architectures. A null pointer may never undergo
pointer arithmetic, and RH covscan justifiedly reports:
MdeModulePkg/UefiBootManagerLib: fix crash on uninitialized ExitData
As reported by Gary, the recent LoadImage/StartImage changes to
accommodate dispatching PE/COFF images built for foreign architectures
may result in a crash when loading an IA32 option ROM into a X64 VM
running OVMF:
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1672
The /MP option of MSVC compiler can reduce the total time to compile the
source files on the command line.
This patch is going to enable this MSVC option in BaseTools.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For some pointer and UINT64 data, the debug code print with '%x'.
Which would loss the upper 32bit data. So update '%x' to '%lx'
for these data. And change the pointer value from '%x' to '%p'.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In API mode FSP wrapper will perform some post
FSP-S process but such process was skipped in Dispatch
mode which may impact some of the boot loaders.
To align behavior between API and Dispatch, an
End-of-Pei callback is introduced to perform same process
in Dispatch mode.
Note: If boot loader implemented its own
PostFspsHobProcess (), it has to check
PcdFspModeSelection and support each mode
properly.
Test: Verified on internal platform and both
FSP API and Dispatch modes booted successfully.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com> Cc: Star Zeng <star.zeng@intel.com> Signed-off-by: Chasel Chiu <chasel.chiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Add .sh file extension to the shell script GdbRun so
changes to this file will pass PatchCheck.py.
Also update all scripts that execute GdbRun to
execute GdbRun.sh instead.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
UefiPayloadPkg: Enhance UEFI payload for coreboot and Slim Bootloader
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com>
In long term we will remove ShellBinPkg, so now we update
platform to use ShellPkg only.
Cc: Maurice Ma <maurice.ma@intel.com> Cc: Prince Agyeman <prince.agyeman@intel.com> Cc: Benjamin You <benjamin.you@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Benjamin You <benjamin.you@intel.com>
Now that the EBC machine type is no longer classified as a
natively supported machine type on the architectures that can
support it via the EBC interpreter, the EBC specific handling
in DXE core is no longer used and can be removed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
MdePkg/UefiBaseType.h: treat EBC as a non-native machine type
Instead of classifying EBC as a supported machine type and have special
handling in DXE core for loading EBC images, make it a foreign type and
rely on the EDK2 PE/COFF image emulator protocol to claim the image when
the DXE core finds that it cannot be supported natively.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
MdeModulePkg/EbcDxe: implement the PE/COFF emulator protocol
Implement the new EDK2 PE/COFF image emulator protocol so that we can
remove the EBC specific handling in the DXE core and other places in
the core code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Ard Biesheuvel [Mon, 27 Mar 2017 14:42:30 +0000 (15:42 +0100)]
MdeModulePkg/PciBusDxe: dispatch option ROMs for foreign architectures
Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Ard Biesheuvel [Fri, 10 Mar 2017 15:50:55 +0000 (16:50 +0100)]
MdeModulePkg/DxeCore: invoke the emulator protocol for foreign images
When encountering PE/COFF images that cannot be supported natively,
attempt to locate an instance of the PE/COFF image emulator protocol,
and if it supports the image, proceed with loading it and register it
with the emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Shenglei Zhang [Tue, 5 Mar 2019 03:08:29 +0000 (11:08 +0800)]
MdePkg/BaseLib: Remove LongJump.c and SetJump.c
MdePkg BaseLib still uses the inline X86 assembly code
in C code files.For now, inline SetJump/LongJump() can be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1163
OvmfPkg/XenBusDxe: replace MIT license text with SPDX ID
The "XenBus.c", "XenStore.c", "XenStore.h" files under "OvmfPkg/XenBusDxe"
include the MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Lars Kurth <lars.kurth@citrix.com> Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
OvmfPkg/IndustryStandard/Xen: replace MIT license text with SPDX ID
The header files under "OvmfPkg/Include/IndustryStandard/Xen" include the
MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Lars Kurth <lars.kurth@citrix.com> Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Several updates have been made to the
OvmfPkg/8259InterruptControllerDxe driver to make it build under OvmfPkg:
A) Update the driver INF file to consume PCDs defined within OvmfPkg;
B) Remove the unnecessary dependency on the IntelFrameworkPkg header file
'FrameworkDxe.h';
C) Remove the IntelFrameworkPkg & PcAtChipsetPkg DEC files dependency in
the driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8259InterruptControllerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8259InterruptControllerDxe
driver in OVMF DSC/FDF files;
C) Remove the consumption of
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel in OVMF DSC
files.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit copies the exact Legacy8259 protocol header file from
IntelFrameworkPkg to OvmfPkg. Also, the protocol GUID definition is
duplicated in the OvmfPkg DEC file.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
IntelFrameworkModulePkg: Fix comments and improve E820 debug output
Fix a few typos in LegacyBiosBuildE820, and improve the debug output of
the E820 table to pad with zeros instead of spaces, remove extra hyphens
and display the memory type in decimal.
We will remove IntelFrameworkModulePkg,
but BaseUefiTianoCustomDecompressLib may still need
to be used. So move BaseUefiTianoCustomDecompressLib
from IntelFrameworkModulePkg to MdeModulePkg.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and Tiano
decompress functionality.
Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
V2: Add a single UefiDecompressLib resolution to the
common section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in BeagleBoardPkg.fdf
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. A single UefiDecompressLib common resolution can
apply to all module types now. So add the single
UefiDecompressLib in MdePkg in [LibraryClasses.common]
section and remove all others.
V2: Use the common UefiDecompressLib resolution in
[LibraryClasses.common] section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in ArmVirtRules.fdf.inc
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. UefiDecompressLib common resolution now can apply to
all module types. So keep the UefiDecompressLib resolution
in [LibraryClasses.common] section and remove all others.
Feng, Bob C [Wed, 3 Apr 2019 02:17:02 +0000 (10:17 +0800)]
BaseTools: Fixed issue in MultiThread Genfds function
https://bugzilla.tianocore.org/show_bug.cgi?id=1450
In the Multiple thread Genfds feature, build tool generates
GenSec, GenFFS command in Makefile.
The Non-Hii Driver does not generate .offset file for uni string offset,
but the build tool has not knowledge about this in autogen phase. So
in this patch, I add a check in Makefile for GenSec command. If the GenSec
input file does not exist, the GenSec will not be called. And if GenSec
command is not called, its output file, which is also the input file of
GenFfs command, will also not exist.So for GenFfs command,
I add a new command parameter -oi which means
the input file is an optional input file which would not exist. so
that I can generate GenFfs command with "-oi" parameter in Makefile.
Current FbGop driver might bind to the wrong PCI device
if a system has multiple PCI display devices. The original
idea was to reuse the generic GraphicsOutputDxe to address
this issue. However, after exploring different approaches
discussed in the bugzilla, it turned out that the best
approach is to enhance the current FbGop driver to match
the PCI device BAR value with the framebuffer base address.
This patch implemented this enhancement by selecting the
PCI device with matched framebuffer base in its PCI BAR.
This has been tested with coreboot on QEMU and Apollo Lake
platform.
Cc: Prince Agyeman <prince.agyeman@intel.com> Cc: Benjamin You <benjamin.you@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Benjamin You <benjamin.you@intel.com>
With the change to BSD+Patent License, the TianoCore Contributor's
Agreement has been removed and as a result, a Contributed-under
tag is no longer appropriate in patches. Remove the check for
the TianoCore Contributor's Agreement and instead, generate an
error if a patch contains a Contributed-under tag in the commit
message.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Yonghong Zhu <yonghong.zhu@intel.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
edk2: Remove Contributions.txt and update Readme.md
* Remove the Contributions.txt file from the root of the edk2 repository
that contained the TianoCore Contribution Agreement.
* Update Readme.md in the root of the edk2 repository to state that
BSD+Patent is the preferred license for the EDK II project.
* Move the portions of Contributions.txt to Readme.md that describe
how to contribute along with the commit message format.
* Add to Readme.md that Signed-off-by means that the contributor
certifies compliance to the Developer's Certificate of Origin 1.1
https://developercertificate.org
Michael D Kinney [Sat, 23 Mar 2019 00:11:26 +0000 (17:11 -0700)]
OvmfPkg: Change License.txt from 2-Clause BSD to BSD+Patent
Change contents of License.txt in OvmfPkg of the edk2 repository
from the 2-Clause BSD License to the BSD+Patent License for the
default license type. Preserve the contents related to the use
of the MIT license in this file.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Qian Yi <yi.qian@intel.com> Reviewed-by: Zailing Sun <zailiang.sun@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Qian Yi <yi.qian@intel.com> Reviewed-by: Zailing Sun <zailiang.sun@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>