Qiu Shumin [Sun, 21 Feb 2016 07:55:14 +0000 (15:55 +0800)]
MdeModulePkg: Add sample help information for HelloWorld application.
Since Shell supports finding help information from resource section
of application image. We enhance the HelloWorld to add help information
string. After the HelloWorld are loaded in system the help string will
be stored in resource section of the application image.
Qiu Shumin [Sun, 21 Feb 2016 07:52:53 +0000 (15:52 +0800)]
ShellPkg: Support finding help message embedded in resource section.
UEFI Shell scandalizes the help message in spec level so that a standalone
UEFI shell application can never get "-?" switch, instead the Shell core
(interpreter) detects the "-?" and finds .MAN file for that shell
application in certain spec defined paths, then show the help extracted
from that .MAN file.
But it means distributing a UEFI shell application not only means
distributing a .EFI file but also distributing a .MAN file. If the text
formatted .MAN file is corrupted (edited by user by mistake), or is
missing (deleted by user by mistake), no help will be shown to user.
So this patch enhance the Shell to make it support finding help message
imbedded in resource section of application image.
The AArch64 DAIF bits are different for reading (mrs) versus writing (msr).
The bitmask definitions assumed they were the same causing incorrect
results when trying to determine the current interrupt state through
GetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Replaced the magic numbers in DisableInterrupts.S and EnableInterrupts.S
with definitions for the DAIF write (daifset/daifclr) IRQ field.
Cohen, Eugene [Mon, 22 Feb 2016 23:08:27 +0000 (23:08 +0000)]
ArmPkg: CpuDxe: don't track interrupt state in a global variable
Update the CpuDxe driver to remove an assumption that it is the only
component modifying interrupt state since this can be done through BaseLib
as well. Instead of using a global variable for last interrupt state we
now check the current PSTATE value directly.
Cohen, Eugene [Mon, 22 Feb 2016 23:08:27 +0000 (23:08 +0000)]
ArmPkg: CpuDxe: fix AArch64 interrupt read masks
The AArch64 DAIF bits are different for reading (mrs) versus writing
(msr). The bitmask definitions assumed they were the same causing
incorrect results when trying to determine the current interrupt
state through ArmGetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Dandan Bi [Tue, 26 Jan 2016 08:07:18 +0000 (16:07 +0800)]
MdeModulePkg: Refine the code in BootMaintenanceManagerUiLib
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Qin Long [Tue, 23 Feb 2016 03:12:51 +0000 (11:12 +0800)]
CryptoPkg/OpensslLib: Upgrade OpenSSL version to 1.0.2f
OpenSSL has released version 1.0.2f with two security fixes
(http://www.openssl.org/news/secadv/20160128.txt) at 28-Jan-2016.
Upgrade the supported OpenSSL version in CryptoPkg/OpensslLib
to catch the latest release 1.0.2f.
(NOTE: The patch file was just re-generated, and no new source
changes was introduced for 1.0.2f enabling)
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qin Long <qin.long@intel.com> Reviewed-by: Ting Ye <ting.ye@intel.com>
Michael Kinney [Thu, 18 Feb 2016 21:09:23 +0000 (13:09 -0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Enable/Restore XD in SMM
If XD is supported, then SMM enables it. The non-SMM execution
environment can choose to enable or disable XD, so the state of
XD must be detected in each SMI and be enabled/restored.
Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Michael Kinney [Thu, 18 Feb 2016 17:46:25 +0000 (09:46 -0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Add EFIAPI to CheckFeatureSupported()
The function CheckFeatureSupported() is used as an EFI_AP_PROCEDURE
in the MP Services Protocol service StartAllAPs(). Any function
used as an EFI_AP_PROCEDURE must use EFIAPI calling convention.
Cc: Laszlo Ersek <lersek@redhat.com> Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The HeaderLog field of the PCIe Extended Capabilities Advanced Error
Reporting structure was incorrectly defined as a 32-bit field. The PCIe
2.1 Base Specification, section 7.10, lists this as 16 bytes, or 4
DWORDs.
Qiu Shumin [Thu, 18 Feb 2016 05:12:58 +0000 (13:12 +0800)]
ShellPkg: Fix the last command doesn't work in a script.
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Ruiyu Ni [Thu, 18 Feb 2016 06:25:56 +0000 (14:25 +0800)]
MdeModulePkg/Partition: Use proper partition number for MBR
UEFI Spec 2.3.1.D Section 9.3.5.1 says Partitions are numbered
according to their entry in their respective partition table,
starting with 1.
Update the code for MBR partition to follow this rule.
Leif Lindholm [Thu, 18 Feb 2016 10:23:04 +0000 (10:23 +0000)]
ArmPlatformPkg: Remove orphaned Juno Makefile
The Juno .dsc and .fdf files were recently deleted (currently held
in OpenPlatformPkg), but a spurious Makefile for building using it
was left in place. Drop the Makefile to complete the cleanup.
Harking back to the earliest days of software development for AArch64,
this piece of code abstracted away "early setup stuff" when the
software model came out of reset.
However, it is unmaintained and has been superseded by ARM Trusted
Firmware. So drop it.
Ard Biesheuvel [Thu, 18 Feb 2016 08:59:09 +0000 (09:59 +0100)]
ArmVirtPkg: ArmVirtQemu: expose only 64-bit entry point for v3.0+ SMBIOS
The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Qiu Shumin [Tue, 16 Feb 2016 01:49:05 +0000 (09:49 +0800)]
ShellPkg: Do NULL pointer check before the pointer is used.
The pointer 'FileInterface->Buffer' returned from 'AllocateZeroPool' in function
'CreateFileInterfaceMem' may be NULL and will be dereferenced at the following code.
Jiaxin Wu [Thu, 21 Jan 2016 17:35:58 +0000 (01:35 +0800)]
MdeModulePkg: Define a general function to create DNS QName
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
The way the first use of the "_maxMode" variable is commented out (i.e.,
together with the enclosing "if" statement) in GetOptimum() triggers the
"misleading-indentation" warning that is new in gcc-6.0, for the block of
code that originally depended on the "if" statement. Gcc believes
(mistakenly) that the programmer believes (mistakenly) that the block
depends on (repIndex == 0) higher up.
Restore the if statement, with a controlling expression that comprises the
constant 1 and "_maxMode" commented out.
Yonghong Zhu [Wed, 17 Feb 2016 03:24:47 +0000 (11:24 +0800)]
BaseTools/VolInfo: add some generic options
The Help information provided by VolInfo does not follow the EDK II Tools
Design doc, so this patch update the help text and add the generic
options: -d, -v, -q, -s.
Yonghong Zhu [Wed, 17 Feb 2016 06:48:28 +0000 (14:48 +0800)]
BaseTools: report an error message when failed to start build command
when build.py was failing to build packages but was not providing any
error message except for “Failed to start command.” this patch provide
the error message.
Daryl McDaniel [Tue, 16 Feb 2016 18:47:30 +0000 (10:47 -0800)]
StdLib/BsdSocketLib: Fix minor memory leak by freeing rrecp on error return.
The error return is triggered by one of two conditions:
1. rrecp is NULL (calloc failed)
2. strdup(dname) returns NULL
Previously, the function just returned NULL. This patch adds a call to
free rrecp before returning NULL. Since the free() function will properly
do nothing when called with a NULL parameter, it is not necessary to
separate the two tests into separate if clauses.
Reported-by: Colin King <colin.king@canonical.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daryl McDaniel <edk2-lists@mc2research.org> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Michael LeMay [Fri, 29 Jan 2016 17:53:47 +0000 (09:53 -0800)]
BaseTools/GenFw: Correct datatypes in diagnostic messages and check for string termination
This patch revises multiple diagnostic messages to use correct
datatypes. It also checks that a symbol name that is about to be used
in a diagnostic message is terminated by a null character within the
contents of the string table section so that the print routine does
not read past the end of the string table section contents when
reading the symbol name.
Michael LeMay [Fri, 29 Jan 2016 04:17:13 +0000 (12:17 +0800)]
BaseTools/GenFw: Enhance error message for bad symbol definitions
This patch expands the error message that is output when GenFw
encounters a bad symbol definition or an unsupported symbol type. It
displays the symbol name, the symbol address, and a message that
describes both possibilities (bad symbol definition or unsupported
symbol type). It also provides two examples of unsupported symbol
types.
Furthermore, this patch revises the conditional for detecting bad
symbol definitions to eliminate a redundant test (a Sym->st_shndx
value of SHN_ABS should certainly be greater than mEhdr->e_shnum) and
to change another test from 'Sym->st_shndx > mEhdr->e_shnum' to
'Sym->st_shndx >= mEhdr->e_shnum' for consistency with the test in
GetShdrByIndex.
Michael LeMay [Fri, 29 Jan 2016 03:23:21 +0000 (11:23 +0800)]
BaseTools/GenFw: Exit with error when header lookup fails
This patch revises GetPhdrByIndex and GetShdrByIndex to cause GenFw to
exit with an error message when a section header lookup fails. The
current behavior of those functions in such circumstances is to return
NULL, which can cause GenFw to subsequently fault when it attempts to
dereference the null pointer.
Fu Siyuan [Fri, 5 Feb 2016 02:15:37 +0000 (10:15 +0800)]
MdeModulePkg: Make the DEBUG info consistent in SNP driver.
SNP driver will print the UNDI returned StatFlags:StatCode with DEBUG macro,
while in some please it uses the reverse order (StatCode:StatFlags). This patch
is to make the print info consistent, that StatFlags always come first.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
jiewen yao [Fri, 29 Jan 2016 08:55:40 +0000 (16:55 +0800)]
MdeModulePkg: Update PropertiesTable for MemoryAttributesTable.
MemoryAttributesTable generation need information in
PropertiesTable.
In memory attributes table generation path,
PropertiesTable need record original memory map and do
not merge the new memory map entry cross original
memory map boundary.
Add MemoryAttributesTable generation in DxeCore.
We leverage the information collected by original
PropertiesTable, and publish runtime code/data to
another standalone table. So that this is a
compatible solution to report more PE Code/Data
information.
edk2 dev [Tue, 16 Feb 2016 02:47:30 +0000 (10:47 +0800)]
BaseTools-Source: Update displayed version information
Standardize the --version and --help text command-line options
Updated tools to correctly display the Build number when using command-line
option --version and exit successfully after termination.
Ecc was also updated to print informational messages after the options are
parsed.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Larry Hauch <larry.hauch@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Before the merger of the authenticated and non-authenticated variable
drivers (commit fa0737a839d0), we had to match the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc" to SECURE_BOOT_ENABLE, because the opposite
GUID would cause either driver to fail an assertion. The header structures
for individual variables residing in the varstore were different
(VARIABLE_HEADER vs. AUTHENTICATED_VARIABLE_HEADER), and each driver could
only handle its own, so this GUID enforcement was necessary.
Since the unification of the variable driver however, it treats (a)
variable store format, and (b) AuthVariableLib instance as independent
characteristics; it can always manipulate variable stores with both header
types. All variations boot now; the difference is whether authenticated
variables, and special variables computed from them (like SecureBoot) are
supported at runtime:
At the moment, SECURE_BOOT_ENABLE selects between cases #2 (FALSE) and #3
(TRUE). That is, it controls both the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc", and the AuthVariableLib resolution in the DSC
files.
Exploiting the unified driver's flexibility, we can simplify
"OvmfPkg/VarStore.fdf.inc" by picking the AuthenticatedVariable GUID as a
constant, and letting SECURE_BOOT_ENABLE control only the AuthVariableLib
resolution. This amounts to SECURE_BOOT_ENABLE choosing between cases #3
(TRUE) and #4 (FALSE), with identical results as before.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/7319/focus=7344
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Star Zeng [Fri, 29 Jan 2016 08:24:10 +0000 (16:24 +0800)]
MdeModulePkg DxeCore: Missing change for OEM reserved memory type at R17460
At the end of CoreFreePoolI(), the check to see if it is a specific
memory type should also cover OEM reserved memory type.
It was missed when adding OEM reserved memory type support at R17460.
Cohen, Eugene [Wed, 10 Feb 2016 23:05:18 +0000 (23:05 +0000)]
ArmPkg: DefaultExceptionHandler fixes for use with DxeCore
Modify the DefaultExceptionHandler (uefi-variant) so it can be used by
DxeCore (via CpuExceptionHandlerLib) where the debug info table is not
yet published at library constructor time.
Ard Biesheuvel [Fri, 12 Feb 2016 09:06:58 +0000 (10:06 +0100)]
BaseTools/GenFw AARCH64: add support for relative data relocations
This adds support to the ELF to PE/COFF conversion performed by GenFw for
the AArch64 ELF relocation types R_AARCH64_PREL64, R_AARCH64_PREL32 and
R_AARCH64_PREL16. Since we already require the ELF and PE/COFF section
layouts to be identical in order to support other relative relocation
types, this is simply a matter of whitelisting these new relocation types
in the same way.
While we're at it, clean up the code a bit, and add a comment explaining
why these relocations are ignored in WriteRelocations64 ().
Hao Wu [Fri, 29 Jan 2016 03:27:53 +0000 (11:27 +0800)]
MdePkg: Add EFI Wireless MAC Connection II Protocol definitions
This commit also removes common structure definitions between EFI Wireless
MAC Connection Protocol and EFI Wireless MAC Connection II Protocol from
WiFi.h and place them in WiFi2.h.
NetworkPkg: better sanity check on Ipv6 prefix length
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.
edk2-devel [Fri, 29 Jan 2016 23:55:57 +0000 (15:55 -0800)]
MdePkg: Update Base.h to fix compilation issues with ICC.
Recent versions of the Intel C compiler define the _MSC_EXTENSIONS
constant. Base.h checks if this constant is defined to decide whether
or not to use a pragma intrinsic, which is unsupported by the latest
version of the Intel C compiler. Thus the check has been modified to
only pass in the case __INTEL_COMPILER is not defined.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ryan Harkin [Wed, 10 Feb 2016 16:25:35 +0000 (16:25 +0000)]
ArmPlatformPkg/ArmJunoPkg: only have 1 PCD for the FDT
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Ryan Harkin [Tue, 9 Feb 2016 10:07:13 +0000 (10:07 +0000)]
EmbeddedPkg/Lan9118Dxe: minor DEBUG tidyup
This patch makes a few minor DEBUG output changes:
- Fix typo in DEBUG output: Negociation->Negotiation
- Change DEBUG occurrences of "Lan9118" to "LAN9118" to make grepping
the log output easier.
- Change the warning that auto-negotiation is not supported when
AutoNegotiate() returns an error.
The function already reports if the feature is supported or not and
can also return an error for other reasons.
Ryan Harkin [Mon, 8 Feb 2016 14:38:05 +0000 (14:38 +0000)]
EmbeddedPkg/Lan9118Dxe: add PCD for negotiation timeout
Add a PCD for the link negotiation timeout so the platform can over-ride
the default value.
The code previously did 2000 iterations of the loop with a 2us stall, so
the code has been changed subtly to set the number of iterations equal
to the PCD value divided by the stall time.
Since the stall time has not changed, the default PCD value is set at
4000 so the original behaviour is not changed.
The problems were discovered when the ARM Juno Development Platform used
the "EFI Network" option with then LAN9118 driver. It fails to boot the
first time and so the board drops back to Shell again:
Warning: LAN9118 Driver in stopped state
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
EhcExecTransfer: transfer failed with 2
EhcControlTransfer: error - Device Error, transfer - 2
Buffer: EFI Hard Drive
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
Warning: LAN9118 Driver not initialized
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
Booting EFI Internal Shell
Exiting Shell drops the user back to the Intel BDS UI. Selecting
"Continue" then succeeds in booting from the EFI Network:
Discussion on the edk2-devel mailing list [1] prompted Laszlo Ersek to
suggest the time taken for the NIC to negotiate was causing a problem.
He suggested the solution contained in this patch to provide a PCD
configurable by the platform.
The default PCD value does not work for Juno. Setting the PCD to a
larger value works for Juno R0, R1 and R2.
Ryan Harkin [Tue, 9 Feb 2016 08:52:32 +0000 (08:52 +0000)]
EmbeddedPkg/Lan9118Dxe: use MemoryFence
When reviewing my LAN9118 driver PCD patch [1], Ard Biesheuvel noted
that most calls to gBS->Stall() in this driver seem to be used to
prevent timing issues between the device updating data and the host
reading the values. And that replacing most of these calls with a
MemoryFence() would be more robust.
The only exceptions are the stalls that are enclosed inside retry loops:
- in the AutoNegotiate() function.
This stall is waiting for the link to negotiate, which may require
stalling until it is ready.
- in the Lan9118Initialize() function.
These two stalls are waiting for devices and time out after a number
of retries.
- in the SoftReset() function.
This stall is inside a loop where the comment states:
"If time taken exceeds 100us, then there was an error condition"
In these instances, I kept the stall, but also added a MemoryFence().
Jim Dailey [Wed, 10 Feb 2016 16:53:00 +0000 (08:53 -0800)]
ShellPkg: ShellFileHandleReadLine must return UCS2 lines.
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Leif Lindholm [Tue, 9 Feb 2016 17:18:55 +0000 (17:18 +0000)]
Maintainers.txt: Update maintainers for ShellBinPkg
Separate ShellPkg and ShellBinPkg into separate entities.
Add Leif Lindholm and Ard Biesheuvel as ShellBinPkg maintainers
for ARM/AArch64 only.
Add indicaton that Jaben Carsey and Shumin Qiu are maintainers for
Ia32/X64 specifically.
jaben carsey [Mon, 8 Feb 2016 23:59:04 +0000 (15:59 -0800)]
ShellPkg: Fix ASCII and UNICODE file pipes.
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Ryan Harkin [Wed, 3 Feb 2016 11:38:12 +0000 (11:38 +0000)]
ArmPlatformPkg: remove unused Sec library
The Sec library was built by the AARCH64 FVP models, but the binary was
unused because it was part of a legacy booting strategy from before ARM
Trusted Firmware came along.
This change requires changes in OpenPlatformPkg to remove the Sec binary
from the FVP build.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Ryan Harkin [Fri, 29 Jan 2016 18:07:28 +0000 (18:07 +0000)]
ArmPlatformPkg: remove ArmJuno.dsc/fdf
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, Juno exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
We can't remove ArmJuno.dec yet because ACPI still uses it to set the
include path to ArmPlatform.h.
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, FVP exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, TC2 exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
jaben carsey [Mon, 8 Feb 2016 23:59:04 +0000 (15:59 -0800)]
ShellPkg: Fix ASCII and UNICODE file pipes.
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Ard Biesheuvel [Fri, 5 Feb 2016 13:57:57 +0000 (14:57 +0100)]
ArmVirtPkg: implement ArmVirtQemuKernel
This implements a version of ArmVirtQemu that does not execute in place from
emulated NOR flash, but implements the Linux kernel boot protocol, and executes
from DRAM instead. This allows UEFI to be loaded as a payload by a previous
bootloader stage such as ARM Trusted Firmware/OP-TEE.
Ard Biesheuvel [Fri, 5 Feb 2016 13:54:42 +0000 (14:54 +0100)]
ArmVirtPkg: introduce new ArmQemuRelocatablePlatformLib
This introduces ArmQemuRelocatablePlatformLib, which started out as a
straight copy of ArmXenRelocatablePlatformLib, but has been modified so
that ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf can be used with
QEMU as well as with Xen. It retains the self relocation and FDT parsing
for the system memory, but uses the QEMU MMU layout.
Ard Biesheuvel [Fri, 5 Feb 2016 13:52:30 +0000 (14:52 +0100)]
ArmVirtPkg/EarlyFdtPL011: allow patchable PCD for initial DT base address
Allow the use of a patchable PCD for the initial DT base address recorded in
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress, so that the module
can be reused by a relocatable version of ArmVirtQemu.
Evan Lloyd [Wed, 3 Feb 2016 17:07:47 +0000 (17:07 +0000)]
ArmPkg: Add isb when setting SCR
Some updates to SCR can cause a problem which manifests as an undefined opcode exception.
This may be when a speculative secure instruction fetch happens after the NS bit is set.
An isb is required to make the register change take effect fully.
Ruiyu Ni [Fri, 29 Jan 2016 08:03:05 +0000 (16:03 +0800)]
MdeModulePkg/UsbAbsPointer:Fix GetState() to return absolute value
Fix UsbMouseAbsolutePointer driver GetState() interface to return
absolute value instead of relative value.
The driver is ported from UsbMouse driver. The GetState of
SimplePointer protocol returns relative value but the GetState
of AbsolutePointer protocol should return absolute value.
Fu Siyuan [Mon, 1 Feb 2016 02:30:47 +0000 (10:30 +0800)]
MdeModulePkg: Correct one return status code in SNP Transmit function.
According to UEFI spec, a BUFFER_FULL return status in UNDI Transmit command
indicates UNDI "Transmit buffer is full. Call Get Status command toempty
buffer." So this patch updates the SNP Transmit to return EFI_NOT_READY for
BUFFER_FULL to let the call know the buffer full status.
Fu Siyuan [Mon, 1 Feb 2016 02:24:43 +0000 (10:24 +0800)]
MdeModulePkg: Update the default size of MNP TX buffer pool.
The MNP and SNP are independent drivers so the MNP_TX_BUFFER_INCREASEMENT could choose
any value as needed. While this patch update the default value of this macro to 32,
to be same as the maximum recycled buffer numbers in one UNDI GetStatus command. It is
a workaround for some incorrect UNDI drivers which may not return the correct statuses
for the SNP and MNP to correctly retry/call GetStatus to clear the buffers.
Fu Siyuan [Wed, 3 Feb 2016 07:15:20 +0000 (15:15 +0800)]
MdeModulePkg: Update DBsize in SNP GetStatus command.
Update the DBsize in GetStatus command to let UNDI return an array of recycled
buffers. This is to make the loop at the end of PxeGetStatus() useful and to
prevent buffer overflow with some non-conformant UNDI drivers which not check
the value of the input DBsize in UNDI GetStatus command.
Zhang Lubo [Fri, 29 Jan 2016 03:17:34 +0000 (11:17 +0800)]
NetworkPkg:Add a new error status code EFI_HTTP_ERROR
v4:
* Update macro HTTP_ERROR_STATUS to HTTP_ERROR_OR_NOT_SUPPORT_STATUS_CODE
Update copyright year.
When the Error Status of ResponseData returned from HttpIoRecvResponse
function during the Http HEAD method, it should also return error status
to Load file protocol.
Add a new error status code EFI_HTTP_ERROR in corresponding with the
UEFI 2.6 spec . When a HTTP error occurred during the network operation,
The EFI_HTTP_ERROR is returned in token.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Zhang Lubo [Thu, 28 Jan 2016 07:34:11 +0000 (15:34 +0800)]
MdePkg:Add a new error status code EFI_HTTP_ERROR.
v2:
*Return the EFI_HTTP_ERROR in the “Status” field in token, instead of
in the status codes returned table of EFI_HTTP_PROTOCOL.Response() interface.
Add a new error status code EFI_HTTP_ERROR in corresponding with
the UEFI 2.6 spec
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>