Star Zeng [Fri, 12 Jan 2018 04:59:03 +0000 (12:59 +0800)]
UefiCpuPkg PiSmmCpuDxeSmm: Remove redundant code to set IDT range to RO
AllocateCodePages() is used to allocate buffer for IDT range,
the code pages will be set to RO in SetMemMapAttributes(),
then the code to set IDT range to RO in PatchGdtIdtMap() is
redundant and could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
It is because AllocateCodePages() is used to allocate buffer for
GDT and TSS, the code pages will be set to RO in SetMemMapAttributes().
But IA32 Stack Guard need use task switch to switch stack that need
write GDT and TSS, so AllocateCodePages() could not be used.
This patch uses AllocatePages() instead of AllocateCodePages() to
allocate buffer for GDT and TSS if StackGuard is enabled on IA32.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Wang Fan [Thu, 11 Jan 2018 07:28:41 +0000 (15:28 +0800)]
MdeModulePkg/Ip4Dxe: Add an independent timer for reconfig checking
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Wang Fan [Wed, 3 Jan 2018 09:35:53 +0000 (17:35 +0800)]
NetworkPkg: Fix a memory leak issue in UDP6 driver
In UDP6Dxe Udp6Groups(), the code return directly without free the
buffer allocated for McastIp when JoinFlag is TRUE. It is a memory
leak issue that needs to be fixed. This patch is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Wang Fan [Wed, 3 Jan 2018 09:30:54 +0000 (17:30 +0800)]
NetworkPkg: Add ASSERT error handling for UDP6 driver
In Udp6Dxe, there are several places use ASSERT to check returned
value. But these errors should be handled if they occur, this patch
is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
When calculating the shortest path from 0 to 100, the
MtrrLibCalculateLeastMtrrs() is called to update the
Vertices.Previous.
When calculating the shortest path from 0 to 40,
MtrrLibCalculateLeastMtrrs() is called recursively to update the
Vertices.Previous.
The second call corrupt the Previous value that will be used
later.
The patch removes the code that corrupts Previous.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Wang Fan [Wed, 10 Jan 2018 07:24:53 +0000 (15:24 +0800)]
MdeModulePkg/Dhcp4Dxe: Free NET_BUF data after sent out to avoid memory leak
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Bi, Dandan [Tue, 9 Jan 2018 07:24:44 +0000 (15:24 +0800)]
MdeModulePkg/VarCheckHii: Update data type for variable "ArrayIndex"
In some case the ArrayIndex with UINT16 may be not large enough to
hold the multiplication result of HiiQuestion->VarOffset * 8;
So this patch update the data type to fix this potential issue.
Cc: Star Zeng <star.zeng@intel.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
M1cha [Sun, 7 Jan 2018 17:31:03 +0000 (01:31 +0800)]
MdePkg/BaseLib: add attribute 'RETURNS_TWICE' to SetJump
When compiling with any ARM toolchain and Os, registers can get
trashed when returning for the second time from SetJump because GCC
only handles this correctly when using standard names like 'setjmp' or
'getcontext'. When different names are used you have to use the
attribute 'returns_twice' to tell gcc to be extra careful.
example:
extern int FN_NAME(void*);
void jmp_buf_set(void *jmpb, void (*f)(void))
{
if (!FN_NAME(jmpb))
f();
}
The generated code pushes backups of r4 and lr to the stack and then
saves all registers using nonstandard_setjmp.
Then it pops the stack and jumps to the function in r3 which is the
main problem because now the function can overwrite our register
backups on the stack.
When we return a second time from the call to nonstandard_setjmp, the
stack pointer has it's original(pushed) position and when the code
pops r4 and lr from the stack the values are not guaranteed to be the
same.
When using a standard name like setjmp or getcontext or adding
'__attribute__((returns_twice))' to nonstandard_setjmp's declaration
the code looks different:
Ruiyu Ni [Tue, 9 Jan 2018 05:52:47 +0000 (13:52 +0800)]
MdeModulePkg/PciBus: Change switch-case to if-else to fix EBC build
EBC compiler doesn't treat EFI_xxx as constant due to these macros
are UINT64 type in 64bit env and UINT32 type in 32bit env.
So it reports error when "case EFI_xxx" is used.
The patch changes to use if-else to fix EBC build failure.
Ruiyu Ni [Tue, 9 Jan 2018 02:33:57 +0000 (10:33 +0800)]
UefiCpuPkg/MtrrLib: Handle one setting request covering all memory
*SetMemoryAttribute*() API cannot handle the setting request that
looks like <0, MAX_ADDRESS, Type>. The buggy parameter checking
logic returns Unsupported for this case.
The patch fixes the checking logic to handle such case.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Ruiyu Ni [Mon, 8 Jan 2018 03:48:00 +0000 (11:48 +0800)]
UefiCpuPkg/MtrrLib: Refine the debug messages
MtrrSetMemoryAttributesInMtrrSettings() missed the debug messages
of memory attribute request and status. The patch moves all debug
messages from MtrrSetMemoryAttributeInMtrrSettings() to
MtrrSetMemoryAttributesInMtrrSettings() and refines the debug message
to carry more information.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Jiaxin Wu [Tue, 2 Jan 2018 05:30:44 +0000 (13:30 +0800)]
NetworkPkg/IScsiDxe: Set ExitBootServiceEvent to NULL after close it.
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 2 Jan 2018 05:30:15 +0000 (13:30 +0800)]
MdeModulePkg/IScsiDxe: Set ExitBootServiceEvent to NULL after close it.
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 2 Jan 2018 03:29:03 +0000 (11:29 +0800)]
NetworkPkg/HttpDxe: Fix build warning error if CHAR8 is unsigned.
This patch is to fix the compiler warning error: C4245. The issue will happen
if the below build option is enabled:
*_*_*_CC_FLAGS = -J.
That's because the value of ('A' - 'a') is a negative value, which will
be converted to an unsigned type if CHAR8 is treated as unsigned:
Src -= ('A' - 'a');
The above issue is also recorded at:
https://bugzilla.tianocore.org/show_bug.cgi?id=815.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Wang Fan [Mon, 8 Jan 2018 05:18:26 +0000 (13:18 +0800)]
MdeModulePkg: Freed packet buffer when error occurs to avoid memory leak.
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Wang Fan [Mon, 8 Jan 2018 05:14:43 +0000 (13:14 +0800)]
MdeModulePkg: Fixed two issues when error occurs in Mtftp4Start.
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Jian J Wang [Mon, 8 Jan 2018 05:30:38 +0000 (13:30 +0800)]
UefiCpuPkg/MpInitLib: fix wrong address set as Stack Guard for APs
The reason is that DXE part initialization will reuse the stack allocated
at PEI phase, if MP was initialized before. Some code added to check this
situation and use stack base address saved in HOB passed from PEI.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Jian J Wang [Thu, 4 Jan 2018 02:57:26 +0000 (10:57 +0800)]
UefiCpuPkg/MpInitLib: fix incorrect stack top init for cpu0
As the name suggests, CpuMpData->CpuInfoInHob[0].ApTopOfStack must be init
to the top of stack. But the MpInitLibInitialize() passed the base address
of stack to InitializeApData(), which is not correct. Although this stack
is not used for BSP, it's should be fixed in case of misunderstanding and
future possible code changes.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Yonghong Zhu [Thu, 4 Jan 2018 07:15:19 +0000 (15:15 +0800)]
BaseTools: Not print SKUID info for PCD when it is only Single SKUID
when it is only single SKUID, we don't need to print the SKUID info for
every PCD since in the Global section there already have this info.
For DefaultStore, we use same rule.
Ruiyu Ni [Fri, 5 Jan 2018 09:08:13 +0000 (17:08 +0800)]
UefiCpuPkg/MpInitLib: Fix a bug that AP enters timer INT handler
When SourceLevelDebug is enabled, AP randomly executes the DXECORE
timer handler logic. The root cause is the interrupts are not
masked in AP wake up procedure.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Wang Fan [Mon, 8 Jan 2018 05:39:50 +0000 (13:39 +0800)]
MdeModulePkg/DxeUdpIoLib: Did some code enhancement for UdpIoLib
* Added some ASSERT descriptions for library APIs.
* Added "Optional" option for Context parameter in UdpIoCancelDgrams().
* Added function return status check for UdpIoFreeIo().
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
BobCF [Tue, 2 Jan 2018 00:58:33 +0000 (08:58 +0800)]
BaseTools: Fix an issue in HiiPcd generation
DynamicHiiPcd may be used by PEIM or DXE driver.
All used DynamicHiiPcd value should be collected and placed into
the default setting PCD PcdNvStoreDefaultValueBuffer.
Wang Fan [Wed, 3 Jan 2018 02:18:29 +0000 (10:18 +0800)]
MdeModulePkg/DxeNetLib: Add parameter check and ASSERT handling.
* Library API should check the input parameters before use, or
ASSERT to tell it has to meet some requirements. But in DxeNetLib,
not all functions follows this rule.
* ASSERT shouldn't be used as error handling, add some handling code
for errors.
* Add some ASSERT commence in function notes.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Wang Fan [Tue, 2 Jan 2018 02:56:44 +0000 (10:56 +0800)]
MdeModulePkg/DxeNetLib: Fix a potential issue in macro definition.
The NIC_ITEM_CONFIG_SIZE macro in DxeNetLib is defined as:
sizeof (NIC_IP4_CONFIG_INFO) + sizeof (EFI_IP4_ROUTE_TABLE) *
MAX_IP4_CONFIG_IN_VARIABLE. This macro should be surrounded
with parenthesis to avoid being incorrectly used.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Fu Siyuan [Tue, 2 Jan 2018 05:18:17 +0000 (13:18 +0800)]
NetworkPkg: Add assert for buffer pointer from DHCP driver.
The PxeBcDhcp4CallBack() is provided for DHCP driver to invoke packet check
during DHCP process, the DHCP driver should make sure Packet and NewPacket
has meaningful value. This patch adds assert for this.
Fu Siyuan [Tue, 2 Jan 2018 03:41:24 +0000 (11:41 +0800)]
NetworkPkg: Abort the PXE process if DHCP has been started by other instance.
PXE need to use extended DHCP options and check received offers in callback
function, so there is no need to continue the PXE process if DHCP driver has
been started by other instance but not PXE driver itself.
Laszlo Ersek [Tue, 2 Jan 2018 17:16:36 +0000 (01:16 +0800)]
BaseTools/DevicePath: fix GCC build error in print_mem(), and clean it up
Currently "BaseTools/Source/C/DevicePath/DevicePath.c" fails to build with
GCC48:
> DevicePath.c: In function 'print_mem':
> DevicePath.c:109:5: error: 'for' loop initial declarations are only
> allowed in C99 mode
> for (size_t i=0; i<n; i++) {
> ^
> DevicePath.c:109:5: note: use option -std=c99 or -std=gnu99 to compile
> your code
In addition, the print_mem() function does not conform to the edk2 coding
style:
- we use CamelCase and no underscores in identifiers,
- the types and type qualifiers should follow the edk2 style,
- initialization as part of definition is forbidden for local variables.
Clean these up.
While updating the print_mem()/PrintMem() call sites, also remove the
superfluous parentheses around the second argument.
Liming Gao [Tue, 2 Jan 2018 12:41:43 +0000 (20:41 +0800)]
BaseTools CommonLib: Fix printf %llx issue on UINT64
UINT64 is defined as the different type for the different ARCHs. To
let it work for all archs and compilers, add (unsigned long long) for
the input value together with %llx.
Wang Fan [Wed, 3 Jan 2018 02:39:46 +0000 (10:39 +0800)]
MdeModulePkg: Add error handling when IP address is Class E
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
zenith432 [Wed, 6 Dec 2017 16:46:37 +0000 (16:46 +0000)]
BaseTools: resolve initialization order errors in VfrFormPkg.h
clang generates many warnings
warning: field 'XXX' is uninitialized when used here [-Wuninitialized]
for VfrFormPkg.h.
VfrFormPkg.h defines many classes derived from CIfrObj (along with other
base classes.)
Each of these derived classes defines a non-static member field that serves
as a duplicate pointer to an original pointer defined in the CIfrObj base
class, but cast to a different pointer type.
The derived class constructor passes the duplicate pointer to base class
constructors:
1) Once passes the address of the duplicate pointer to the CIfrObj
constructor to have it initialized.
2) Then passes the duplicate pointer to one or more subsequent base class
constructors to be used.
Both 1) and 2) constitute undefined behavior in C++. C++ prescribes that
base classes are initialized before non-static members when initializing a
derived class. So when base class constructors are executing, it is not
permitted to assume any non-static members of the derived class exist (even
to the stage of having their storage allocated.)
clang does not issue warnings for 1), but issues warnings -Wuninitialized
for 2).
This coding methodology is resolved as follows:
a) The CIfrObj object accessor method for retrieving the original pointer
is revised to a template member function that returns the original
pointer cast to a desired target type.
b) The call to CIfrObj constructor is no longer used to initialize the
duplicate pointer in the derived class.
c) Any subsequent calls to a base class constructor that need to use the
pointer, retrieve it from the CIfrObj base class using the template
accessor method.
d) If the derived class makes no further use of the pointer, then the
duplicate pointer defined in it is eliminated.
e) If the derived class needs the duplicate pointer for other use, the
duplicate pointer remains in the derived class and is initialized in
proper order from the original pointer in CIfrObj.
f) Existing source code that previously used the CIfrObj pointer accessor
method is revised to use the template method.
zenith432 [Sat, 9 Dec 2017 10:41:48 +0000 (10:41 +0000)]
BaseTools: silence parentheses-equality warning
Some code generated by antlr causes clang to emit warning
warning: equality comparison with extraneous parentheses
[-Wparentheses-equality]
The warning is suppressed specifically for clang without affecting other
compilers.
zenith432 [Sat, 9 Dec 2017 09:38:51 +0000 (09:38 +0000)]
BaseTools: correct mal-typed CVfrDLGLexer::errstd
The member function CVfrDLGLexer::errstd is intended as an override virtual
function of DLGLexerBase::errstd, but due to mismatched prototype, it
didn't override, and never got called.
This is caused by a previous patch which tried to fix string over-read.
It's found that that patch for PrintLib in MdePkg will cause premature
terminating of loop used to traversing format string and cause incomplete
string output. Because this library uses similar code to do the same
job, it has the same issue too. So the fix is also the same.
Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
(the spurious digits are SMBIOS data from the home screen)
The problem appears to be that the CHAR16 value of BOXDRAW_HORIZONTAL
equals 0x2500, which means that testing ArgumentString[] != '\0'
(which tests the low byte only) will yield FALSE and terminate the
loop prematurely.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Liming Gao <liming.gao@intel.com>
Star Zeng [Fri, 29 Dec 2017 10:12:36 +0000 (18:12 +0800)]
MdeModulePkg VarCheckPcd: Make sure the bin at required alignment
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Star Zeng [Fri, 29 Dec 2017 10:10:36 +0000 (18:10 +0800)]
MdeModulePkg VarCheckHii: Make sure the bin at required alignment
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Enhance DumpModuleImageInfo() for page fault with I/D set.
If it is page fault with I/D set, the (E/R)IP in SystemContext
could not be used for DumpModuleImageInfo(), instead of, the next
IP of the IP triggering this page fault could be found from stack
by (E/R)SP in SystemContext.
IA32 SDM:
— I/D flag (bit 4).
This flag is 1 if the access causing the page-fault exception was
an instruction fetch. This flag describes the access causing the
page-fault exception, not the access rights specified by paging.
The idea comes from SmiPFHandler () in
UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c and
UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Yonghong Zhu [Thu, 28 Dec 2017 17:40:54 +0000 (01:40 +0800)]
BaseTools: Fix a bug for different FV use same FILE statement Guid
We meet a case that different FV use same FILE statement Guid, but the
FILE content is different. current we use the Guid value as Ffs file
dir which cause the ffs file will be override. This patch use Guid
value and Fv name as ffs dir for FILE statement.
Jian J Wang [Thu, 28 Dec 2017 02:22:39 +0000 (10:22 +0800)]
MdeModulePkg/DxePrintLibPrint2Protocol: Fix error in Precision position calculation
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Jian J Wang [Mon, 25 Dec 2017 02:07:39 +0000 (10:07 +0800)]
MdePkg/BasePrintLib: Fix error in Precision position calculation
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Ard Biesheuvel [Wed, 27 Dec 2017 09:16:47 +0000 (09:16 +0000)]
CryptoPkg/OpensslLib AARCH64: disable rather than demote format warning
We recently added -Wno-error=format to the OpenSslLib build script to
work around an issue in the upstream OpenSSL code. This does not inhibit
the warning, but prevents it from breaking the build by not treating it
as a fatal error.
Unfortunately, this interacts poorly with the -Wno-unused-const-variable
option that we added to GCC49 and later. Those versions of GCC ignore
-Wno-xxxx options that they don't understand, unless warnings are emitted
for another reason, in which case the warning is emitted after all, and
in our case, this breaks the build when the non-fatal format warning is
emitted.
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c: In function 'uint64_print':
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c:105:32: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'int64_t {aka long long int}' [-Wformat=]
return BIO_printf(out, "%"BIO_PRI64"d\n", **(int64_t **)pval);
^
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c:106:28: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
return BIO_printf(out, "%"BIO_PRI64"u\n", **(uint64_t **)pval);
^
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c: At top level:
cc1: error: unrecognized command line option '-Wno-unused-const-variable' [-Werror]
cc1: all warnings being treated as errors
So replace -Wno-error=format with -Wno-format to suppress the warning
entirely.
Ard Biesheuvel [Wed, 27 Dec 2017 07:52:39 +0000 (07:52 +0000)]
CryptoPkg/OpensslLib AARCH64: suppress format string warning
On GCC Build: openssl-1.1.0g introduced one additional build warning:
...\openssl\crypto\asn1\x_int64.c:105:32: error: format '%ld' expects
argument of type 'long int', but argument 3 has type 'int64_t
{aka long long int}' [-Werror=format=]
return BIO_printf(out, "%"BIO_PRI64"d\n", **(int64_t **)pval);
^
Add "-Wno-error=format" to GCC build flags to suppress this warning,
since we have no real printf usage in BaseCryptLib, and BIO_printf()
was already wrapped as a dummy implementation in CryptoPkg.
Jiaxin Wu [Fri, 22 Dec 2017 02:15:36 +0000 (10:15 +0800)]
NetworkPkg/IScsiDxe: Correct the DnsMode value according the target info.
When the platform gets the target info from DHCP (option 17) and the ISCSI
server is expressed as IP address, the value of DnsMode should be false,
otherwise, the failure will happen in certain case.
please refer to https://bugzilla.tianocore.org/show_bug.chi?id=823 for
the detailed steps.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Karunakar P <karunakarp@amiindia.co.in>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Tested-by: Karunakar P <karunakarp@amiindia.co.in> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 26 Dec 2017 05:30:25 +0000 (13:30 +0800)]
NetworkPkg/HttpDxe: Remove the unnecessary ASSERT.
Cc: Wang Fan <fan.wang@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 26 Dec 2017 03:10:34 +0000 (11:10 +0800)]
NetworkPkg/HttpDxe: Fix the memory leak issue in HttpRequest().
Cc: Wang Fan <fan.wang@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Tue, 26 Dec 2017 01:31:06 +0000 (09:31 +0800)]
MdeModulePkg/DxeHttpLib: Refine some coding style.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Mon, 25 Dec 2017 08:57:28 +0000 (16:57 +0800)]
MdeModulePkg/DxeHttpLib: Correct some return Status.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Jiaxin Wu [Mon, 25 Dec 2017 08:43:37 +0000 (16:43 +0800)]
MdeModulePkg/DxeHttpLib: Check the input parameters for some APIs.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com
Jiaxin Wu [Thu, 21 Dec 2017 06:36:12 +0000 (14:36 +0800)]
MdeModulePkg/DxeHttpLib: Avoid the potential memory leak when error happen.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>