OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Restore C-bit when SEV is active
AmdSevDxe maps the flash memory range with C=0, but
SetMemorySpaceAttributes() unconditionally resets the C-bit to '1'. Lets
restore the mapping back to C=0.
OvmfPkg/QemuFlashFvbServicesRuntimeDxe: mark Flash memory range as MMIO
The flash memory range is an IO address and should be presented as Memory
Mapped IO in EFI Runtime mapping. This information can be used by OS
when mapping the flash memory range.
It is especially helpful in SEV guest case, in which IO addresses should
be mapped as unencrypted. If memory region is not marked as MMIO then OS
maps the range as encrypted.
MdeModulePkg/Variable: Check EFI_MEMORY_RUNTIME attribute before setting it
Set the EFI_MEMORY_RUNTIME attribute in FtwNotificationEvent() only if
the attribute is not already present. This will ensure that the attributes
set by the platform drivers (e.g Ovmf pflash) is not lost.
Cc: Dong Eric <eric.dong@intel.com> Cc: Justen Jordan L <jordan.l.justen@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Reviewed-by: Star Zeng <star.zeng@intel.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
In mSmmBootPerformanceTable there are two parts,
one is the FPDT table header and the other is FPDT records.
Currently:
mPerformanceLength: The length of existing FPDT records.
mMaxPerformanceLength: The maximum length allocated for
mSmmBootPerformanceTable(including FPDT table header length
and existing FPDT records length)
But when compare mPerformanceLength with mMaxPerformanceLength
to check whether need to allocate new buffer for new FPDT
record, we miss to add mPerformanceLength with header length,
which will cause pool allocation behavior is not correct.
Now update the mPerformanceLength to fix this issue:
updated mPerformanceLength = FPDT table header length
+ existing FPDT records length.
Chris Co [Thu, 28 Jun 2018 19:31:21 +0000 (03:31 +0800)]
BaseTools/Trim: Normalize filepaths to fix comparisons on Windows
When using Linaro GCC5+ arm-eabi toolchain on Windows, the generated
DSDT.iii contains a canonicalized ("\.\" removed and lower case)
filepath for the preprocessed DSDT.i file in the first line.
Trim.exe is called on DSDT.iii to generate DSDT.iiii, which does a
line for line comparison of filepaths encountered to the preprocessed
DSDT.i filepath found in the first line to determine what lines to
place in DSDT.iiii. Since the DSDT.i filepath is canonicalized and
all later filepaths in DSDT.iii are not canonicalized, all comparisons
fail and the result is in an empty DSDT.iiii.
Issue was first reported to Linaro here:
https://bugs.linaro.org/show_bug.cgi?id=2909
where the recommendation was to address the issue in Trim.exe.
This patch normalizes the case and pathname of all filepaths
encountered during Trim.exe execution on preprocessed files. This
fixes comparisons of filepaths that contain mismatching case on
case-insensitive filesystems, redundant separators, and uplevel
references.
Ruiyu Ni [Mon, 2 Jul 2018 03:13:17 +0000 (11:13 +0800)]
MdeModulePkg/ResetUtilityLib: Add pack(1) for reset data structure
RESET_UTILITY_GUID_SPECIFIC_RESET_DATA structure should be declared
as pack(1).
The patch adds the missing pack(1) pragma.
(GUID *)((UINT8 *)&ResetData +
OFFSET_OF (RESET_UTILITY_GUID_SPECIFIC_RESET_DATA, ResetSubtype))
is used to replace &ResetData.ResetSubType to resolve C4366 VS
compiler warning.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Ruiyu Ni [Mon, 25 Jun 2018 07:35:06 +0000 (15:35 +0800)]
MdeModulePkg/BmpSupportLib: Check PixelHeight/PixelWidth against 0
The patch adds check logic to make sure that for a input BMP file,
the width or height is not 0; for a input GOP blt buffer, the width
or height is not 0. Otherwise, UNSUPPORTED status is returned.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ruiyu Ni [Mon, 25 Jun 2018 06:54:33 +0000 (14:54 +0800)]
MdeModulePkg/BmpSupportLib: Correct debug message
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Star Zeng [Wed, 27 Jun 2018 06:10:45 +0000 (14:10 +0800)]
MdeModulePkg SataControllerDxe: Calculate ChannelCount based on PI value
Current code calculates ChannelCount based on CAP(NP) value.
It only works when the ports implemented number are <= CAP(NP),
for example, platform has CAP(NP) = 5 (means 6 ports) and ports
implemented are 0, 1, 2, 3, 4 and 5.
But we have some platform that has CAP(NP) = 1 (means 2 ports) and
ports implemented are 1 and 2, and has no port 0 implemented, then
current code does not work.
This patch updates the code to calculate ChannelCount based on PI value.
Star Zeng [Thu, 21 Jun 2018 05:42:41 +0000 (13:42 +0800)]
MdeModulePkg Variable: Make sure no more than one Variable HOB
VariableHob may be built in PcdPeim (by PcdNvStoreDefaultValueBuffer)
or some platform module (by some tool).
The two solutions should not be co-exist.
Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
chenc2 [Fri, 29 Jun 2018 03:38:37 +0000 (11:38 +0800)]
UefiCpuPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
chenc2 [Fri, 29 Jun 2018 03:36:32 +0000 (11:36 +0800)]
StdLibPrivateInternalFiles: Removing ipf from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
chenc2 [Fri, 29 Jun 2018 03:36:02 +0000 (11:36 +0800)]
StdLib: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
chenc2 [Fri, 29 Jun 2018 03:35:21 +0000 (11:35 +0800)]
SourceLevelDebugPkg: Removing ipf from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Hao Wu <hao.a.wu@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
chenc2 [Fri, 29 Jun 2018 03:34:22 +0000 (11:34 +0800)]
ShellPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
chenc2 [Fri, 29 Jun 2018 03:33:44 +0000 (11:33 +0800)]
SecurityPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
chenc2 [Fri, 29 Jun 2018 03:30:22 +0000 (11:30 +0800)]
OvmfPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:29:16 +0000 (11:29 +0800)]
Omap35xxPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:28:46 +0000 (11:28 +0800)]
Nt32Pkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
chenc2 [Fri, 29 Jun 2018 03:24:52 +0000 (11:24 +0800)]
IntelFrameworkPkg: Removing ipf from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
chenc2 [Fri, 29 Jun 2018 03:24:22 +0000 (11:24 +0800)]
IntelFrameworkModulePkg: Removing ipf from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
chenc2 [Fri, 29 Jun 2018 03:21:57 +0000 (11:21 +0800)]
EmbeddedPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:21:05 +0000 (11:21 +0800)]
EdkShellPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
chenc2 [Fri, 29 Jun 2018 03:20:25 +0000 (11:20 +0800)]
EdkShellBinPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
chenc2 [Fri, 29 Jun 2018 03:18:40 +0000 (11:18 +0800)]
DuetPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
chenc2 [Fri, 29 Jun 2018 03:15:55 +0000 (11:15 +0800)]
BeagleBoardPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:15:19 +0000 (11:15 +0800)]
ArmVirtPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
chenc2 [Fri, 29 Jun 2018 03:14:39 +0000 (11:14 +0800)]
ArmPlatformPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:13:43 +0000 (11:13 +0800)]
ArmPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
chenc2 [Fri, 29 Jun 2018 03:11:48 +0000 (11:11 +0800)]
AppPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Add NULL pointer check for the "Guid" parameter
when handle FPDT_DUAL_GUID_STRING_EVENT_TYPE.
2. Make the code logic in DxeCore/SmmCore/PeiPerformanceLib
aligned when handle FPDT_DUAL_GUID_STRING_EVENT_TYPE.
Dandan Bi [Mon, 25 Jun 2018 14:49:56 +0000 (22:49 +0800)]
ShellPkg/DP: Add more check for input parameters
New added checkers includes:
1. Too many invalid parameters
2. Too few parameter
3. Invalid number parameter for -n and -t flag
4. Conflict parameter of -A and -R.
Gary Lin [Mon, 25 Jun 2018 10:31:36 +0000 (18:31 +0800)]
BaseTools: Replace StringIO.StringIO with io.BytesIO
Replace StringIO.StringIO with io.BytesIO to be compatible with python3.
This commit also removes "import StringIO" from those python scripts
that don't really use it.
Gary Lin [Mon, 25 Jun 2018 10:31:35 +0000 (18:31 +0800)]
BaseTools: Fix old python2 idioms
Based on "futurize -f lib2to3.fixes.fix_idioms"
* Change some type comparisons to isinstance() calls:
type(x) == T -> isinstance(x, T)
type(x) is T -> isinstance(x, T)
type(x) != T -> not isinstance(x, T)
type(x) is not T -> not isinstance(x, T)
Bug 973 just mentions UsbBusDxe, but UsbBusPei has similar issue.
HUB descriptor has variable length.
But the code uses stack (HubDescriptor in PeiDoHubConfig) with fixed
length sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (12) for SuperSpeed path.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
HUB descriptor has variable length.
But the code uses stack (HubDesc in UsbHubInit) with fixed length
sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (32 that is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR)) for SuperSpeed path, then there will
be stack overflow when IOMMU is enabled because the Unmap operation
will copy the data from device buffer to host buffer.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
The definition EFI_USB_SUPER_SPEED_HUB_DESCRIPTOR is wrong (HubDelay
field should be UINT16 type) and no code is using it, the patch
removes it.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Bi, Dandan [Fri, 22 Jun 2018 08:56:20 +0000 (16:56 +0800)]
ShellPkg/dp: Update dp tool to parse new Perf record
Since performance library instances have been updated
to create new FPDT records for new Perf macros.
So enhance dp tool to parse the new FPDT records.
Enhancement mainly includes:
1. parse the single records for PERF_EVENT macro
2. Parse the new added FPDT_DUAL_GUID_STRING_EVENT_RECORD